Bacterial Cellulose-Based Biomimetic Nanofibrous Scaffold with Muscle Cells for Hollow Organ Tissue Engineering

Biodegradable Polymers in Veterinary Medicine-A Review

During the past two decades, tremendous progress has been made in the development of biodegradable polymeric materials for various industrial applications, including human and veterinary medicine. They are promising alternatives to commonly used non-degradable polymers to combat the global plastic waste crisis. Among biodegradable polymers used, or potentially applicable to, veterinary medicine are natural polysaccharides, such as chitin, chitosan, and cellulose as well as various polyesters, including poly(ε-caprolactone), polylactic acid, poly(lactic-co-glycolic acid), and polyhydroxyalkanoates produced by bacteria. They can be used as implants, drug carriers, or biomaterials in tissue engineering and wound management. Their use in veterinary practice depends on their biocompatibility, inertness to living tissue, mechanical resistance, and sorption characteristics. They must be designed specifically to fit their purpose, whether it be: (1) facilitating new tissue growth and allowing for controlled interactions with living cells or cell-growth factors, (2) having mechanical properties that address functionality when applied as implants, or (3) having controlled degradability to deliver drugs to their targeted location when applied as drug-delivery vehicles. This paper aims to present recent developments in the research on biodegradable polymers in veterinary medicine and highlight the challenges and future perspectives in this area.

Cell-Based Therapy for Urethral Regeneration: A Narrative Review and Future Perspectives

Urethral stricture is a common urological disease that seriously affects quality of life. Urethroplasty with grafts is the primary treatment, but the autografts used in clinical practice have unavoidable disadvantages, which have contributed to the development of urethral tissue engineering. Using various types of seed cells in combination with biomaterials to construct a tissue-engineered urethra provides a new treatment method to repair long-segment urethral strictures. To date, various cell types have been explored and applied in the field of urethral regeneration. However, no optimal strategy for the source, selection, and application conditions of the cells is available. This review systematically summarizes the use of various cell types in urethral regeneration and their characteristics in recent years and discusses possible future directions of cell-based therapies.

The biosynthesis of amidated bacterial cellulose derivatives via in-situ strategy

Bacterial cellulose, as a kind of natural biopolymer produced by bacterial fermentation, has attracted wide attention owing its unique physical and chemical properties. Nevertheless, the single functional group on the surface of BC greatly hinders its wider application. The functionalization of BC is of great significance to broaden the application of BC. In this work, N-acetylated bacterial cellulose (ABC) was successfully prepared using K. nataicola RZS01-based direct synthetic method. FT-IR, NMR and XPS confirmed the in-situ modification of BC by acetylation. The SEM and XRD results demonstrated that ABC has a lower crystallinity and higher fiber width compare with pristine 88 BCE % cell viability on NIH-3 T3 cell and near zero hemolysis ratio indicate its good biocompatibility. In addition, the as-prepared acetyl amine modified BC was further treated by nitrifying bacteria to enrich its functionalized diversity. This study provides a mild in-situ pathway to construct BC derivatives in an environmentally friendly way during its metabolism.

Biomimetic Bilayered Scaffolds for Tissue Engineering: From Current Design Strategies to Medical Applications

Tissue damage due to cancer, congenital anomalies, and injuries needs new efficient treatments that allow tissue regeneration. In this context, tissue engineering shows a great potential to restore the native architecture and function of damaged tissues, by combining cells with specific scaffolds. Scaffolds made of natural and/or synthetic polymers and sometimes ceramics play a key role in guiding cell growth and formation of the new tissues. Monolayered scaffolds, which consist of uniform material structure, are reported as not being sufficient to mimic complex biological environment of the tissues. Osteochondral, cutaneous, vascular, and many other tissues all have multilayered structures, therefore multilayered scaffolds seem more advantageous to regenerate these tissues. In this review, recent advances in bilayered scaffolds design applied to regeneration of vascular, bone, cartilage, skin, periodontal, urinary bladder, and tracheal tissues are focused on. After a short introduction on tissue anatomy, composition and fabrication techniques of bilayered scaffolds are explained. Then, experimental results obtained in vitro and in vivo are described, and their limitations are given. Finally, difficulties in scaling up production of bilayer scaffolds and reaching the stage of clinical studies are discussed when multiple scaffold components are used.

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3ω-method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK-1 in the direction of the aligned fibers versus 0.3 W mK-1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials.

Bacterial cellulose: A promising biopolymer with interesting properties and applications

The ever-increasing demands for materials with desirable properties led to the development of materials that impose unfavorable influences on the environment and the ecosystem. Developing a low-cost, durable, and eco-friendly functional material with biological origins has become necessary to avoid these consequences. Bacterial cellulose generated by bacteria dispenses excellent structural and functional properties and satisfies these requirements. BC and BC-derived materials are essential in developing pure and environmentally safe functional materials. This review offers a detailed understanding of the biosynthesis of BC, properties, various functionalization methods, and applicability in biomedical, water treatment, food storage, energy conversion, and energy storage applications.

Bacterial Cellulose as Drug Delivery System for Optimizing Release of Immune Checkpoint Blocking Antibodies

Immune checkpoint blocking therapy is a promising cancer treatment modality, though it has limitations such as systemic toxicity, which can often be traced to uncontrolled antibody spread. Controlling antibody release with delivery systems is, therefore, an attractive approach to reduce systemic antibody spread and potentially mitigate the side effects of checkpoint immunotherapy. Here, bacterial cellulose (BC) was produced and investigated as a delivery system for optimizing checkpoint-blocking antibody delivery. BC was produced in 24-well plates, and afterward, the edges were removed to obtain square-shaped BC samples with a surface of ~49 mm2. This customization was necessary to allow smooth in vivo implantation. Scanning electron microscopy revealed the dense cellulose network within BC. Human IgG antibody was included as the model antibody for loading and release studies. IgG antibody solution was injected into the center of BC samples. In vitro, all IgG was released within 24 to 48 h. Cell culture experiments demonstrated that BC neither exerted cytotoxic effects nor induced dendritic cell activation. Antibody binding assays demonstrated that BC does not hamper antibody function. Finally, antibody-loaded BC was implanted in mice, and serum measurements revealed that BC significantly reduced IgG and anti-CTLA-4 spread in mice. BC implantation did not induce side effects in mice. Altogether, BC is a promising and safe delivery system for optimizing the delivery and release of checkpoint-blocking antibodies.

Bacterial cellulose as a potential biopolymer in biomedical applications: a state-of-the-art review

Throughout history, natural biomaterials have benefited society. Nevertheless, in recent years, tailoring natural materials for diverse biomedical applications accompanied with sustainability has become the focus. With the progress in the field of materials science, novel approaches for the production, processing, and functionalization of biomaterials to obtain specific architectures have become achievable. This review highlights an immensely adaptable natural biomaterial, bacterial cellulose (BC). BC is an emerging sustainable biopolymer with immense potential in the biomedical field due to its unique physical properties such as flexibility, high porosity, good water holding capacity, and small size; chemical properties such as high crystallinity, foldability, high purity, high polymerization degree, and easy modification; and biological characteristics such as biodegradability, biocompatibility, excellent biological affinity, and non-biotoxicity. The structure of BC consists of glucose monomer units polymerized via cellulose synthase in β-1-4 glucan chains, creating BC nano fibrillar bundles with a uniaxial orientation. BC-based composites have been extensively investigated for diverse biomedical applications due to their similarity to the extracellular matrix structure. The recent progress in nanotechnology allows the further modification of BC, producing novel BC-based biomaterials for various applications. In this review, we strengthen the existing knowledge on the production of BC and BC composites and their unique properties, and highlight the most recent advances, focusing mainly on the delivery of active pharmaceutical compounds, tissue engineering, and wound healing. Further, we endeavor to present the challenges and prospects for BC-associated composites for their application in the biomedical field.

Fabrication strategies and biomedical applications of three-dimensional bacterial cellulose-based scaffolds: A review

Bacterial cellulose (BC), an extracellular polysaccharide, is a versatile biopolymer due to its intrinsic physicochemical properties, broad-spectrum applications, and remarkable achievements in different fields, especially in the biomedical field. Presently, the focus of BC-related research is on the development of scaffolds containing other materials for in-vitro and in-vivo biomedical applications. To this end, prime research objectives concern the biocompatibility of BC and the development of three-dimensional (3D) BC-based scaffolds. This review summarizes the techniques used to develop 3D BC scaffolds and discusses their potential merits and limitations. In addition, we discuss the various biomedical applications of BC-based scaffolds for which the 3D BC matrix confers desired structural and conformational features. Overall, this review provides comprehensive coverage of the idea, requirements, synthetic strategies, and current and prospective applications of 3D BC scaffolds, and thus, should be useful for researchers working with polysaccharides, biopolymers, or composite materials.

Bacterial Cellulose and Its Applications

The sharp increase in the use of cellulose seems to be in increasing demand in wood; much more research related to sustainable or alternative materials is necessary as a lot of the arable land and natural resources use is unsustainable. In accordance, attention has focused on bacterial cellulose as a new functional material. It possesses a three-dimensional, gelatinous structure consisting of cellulose with mechanical and thermal properties. Moreover, while a plant-originated cellulose is composed of cellulose, hemi-cellulose, and lignin, bacterial cellulose attributable to the composition of a pure cellulose nanofiber mesh spun is not necessary in the elimination of other components. Moreover, due to its hydrophilic nature caused by binding water, consequently being a hydrogel as well as biocompatibility, it has only not only used in medical fields including artificial skin, cartilage, vessel, and wound dressing, but also in delivery; some products have even been commercialized. In addition, it is widely used in various technologies including food, paper, textile, electronic and electrical applications, and is being considered as a highly versatile green material with tremendous potential. However, many efforts have been conducted for the evolution of novel and sophisticated materials with environmental affinity, which accompany the empowerment and enhancement of specific properties. In this review article, we summarized only industry and research status regarding BC and contemplated its potential in the use of BC.

Bacterial Cellulose-A Remarkable Polymer as a Source for Biomaterials Tailoring

Nowadays, the development of new eco-friendly and biocompatible materials using ‘green’ technologies represents a significant challenge for the biomedical and pharmaceutical fields to reduce the destructive actions of scientific research on the human body and the environment. Thus, bacterial cellulose (BC) has a central place among these novel tailored biomaterials. BC is a non-pathogenic bacteria-produced polysaccharide with a 3D nanofibrous structure, chemically identical to plant cellulose, but exhibiting greater purity and crystallinity. Bacterial cellulose possesses excellent physicochemical and mechanical properties, adequate capacity to absorb a large quantity of water, non-toxicity, chemical inertness, biocompatibility, biodegradability, proper capacity to form films and to stabilize emulsions, high porosity, and a large surface area. Due to its suitable characteristics, this ecological material can combine with multiple polymers and diverse bioactive agents to develop new materials and composites. Bacterial cellulose alone, and with its mixtures, exhibits numerous applications, including in the food and electronic industries and in the biotechnological and biomedical areas (such as in wound dressing, tissue engineering, dental implants, drug delivery systems, and cell culture). This review presents an overview of the main properties and uses of bacterial cellulose and the latest promising future applications, such as in biological diagnosis, biosensors, personalized regenerative medicine, and nerve and ocular tissue engineering.

An Overview Regarding Microbial Aspects of Production and Applications of Bacterial Cellulose

Cellulose is the most widely used biopolymer, accounting for about 1.5 trillion tons of annual production on Earth. Bacterial cellulose (BC) is a form produced by different species of bacteria, representing a purified form of cellulose. The structure of bacterial cellulose consists of glucose monomers that give it excellent properties for different medical applications (unique nanostructure, high water holding capacity, high degree of polymerization, high mechanical strength, and high crystallinity). These properties differ depending on the cellulose-producing bacteria. The most discussed topic is related to the use of bacterial cellulose as a versatile biopolymer for wound dressing applications. The aim of this review is to present the microbial aspects of BC production and potential applications in development of value-added products, especially for biomedical applications.

Preparation of Tubular Biocellulose Implants and Its Use in Surgery—A Review

This review highlights the current state regarding the preparation and characterization of tubular biocellulose materials as well as their application and application potential with a special focus on abdominal oncologic surgery. Biocellulose is a natural polymer synthesized by acetic acid bacteria from low molecular sugars and alcohols as a mechanically stable nanofiber network at the interface between the aqueous culture medium and air. This hydrogel is characterized by very high purity and biocompatibility, dimensional stability, and good surgical handling. With this property profile, biocellulose proves to be a promising candidate for the development of novel medical soft tissue implants. This requires close R&D cooperation between chemists, material scientists, biotechnologists, and surgeons. In this sense, this review spans from the natural polymer to the design of biocellulose implants and surgical suitability. It is also a concern of this article to show concretely the great need for such implants and the fields of application in oncological abdominal surgery where tubular biocellulose is or could be the focus of research. Furthermore, a critical assessment for the use of biocellulose materials concerning incidence malignancy and surgical interventions, complication rates, and current studies is emphasized. The regeneration of damaged bile ducts by the use of biocellulose implants is a first example.

Electrosprayed Shrimp and Mushroom Nanochitins on Cellulose Tissue for Skin Contact Application

Cosmetics has recently focused on biobased skin-compatible materials. Materials from natural sources can be used to produce more sustainable skin contact products with enhanced bioactivity. Surface functionalization using natural-based nano/microparticles is thus a subject of study, aimed at better understanding the skin compatibility of many biopolymers also deriving from biowaste. This research investigated electrospray as a method for surface modification of cellulose tissues with chitin nanofibrils (CNs) using two different sources-namely, vegetable (i.e., from fungi), and animal (from crustaceans)-and different solvent systems to obtain a biobased and skin-compatible product. The surface of cellulose tissues was uniformly decorated with electrosprayed CNs. Biological analysis revealed that all treated samples were suitable for skin applications since human dermal keratinocytes (i.e., HaCaT cells) successfully adhered to the processed tissues and were viable after being in contact with released substances in culture media. These results indicate that the use of solvents did not affect the final cytocompatibility due to their effective evaporation during the electrospray process. Such treatments did not also affect the characteristics of cellulose; in addition, they showed promising anti-inflammatory and indirect antimicrobial activity toward dermal keratinocytes in vitro. Specifically, cellulosic substrates decorated with nanochitins from shrimp showed strong immunomodulatory activity by first upregulating then downregulating the pro-inflammatory cytokines, whereas nanochitins from mushrooms displayed an overall anti-inflammatory activity via a slight decrement of the pro-inflammatory cytokines and increment of the anti-inflammatory marker. Electrospray could represent a green method for surface modification of sustainable and biofunctional skincare products.

How to control interactions of cellulose-based biomaterials with skin: the role of acidity in the contact area

Being able to control the interactions of biomaterials with living tissues and skin is highly desirable for many biomedical applications. This is particularly the case for cellulose-based materials which provide one of the most versatile platforms for tissue engineering due to their strength, biocompatibility and abundance. Achieving such control, however, requires detailed molecular-level knowledge of the dominant interaction mechanisms. Here, we employed both biased and unbiased atomic-scale molecular dynamics simulations to explore how cellulose crystals interact with model stratum corneum bilayers, ternary mixtures of ceramides, cholesterol, and free fatty acids. Our findings show that acidity in the contact area directly affects binding between cellulose and the stratum corneum bilayer: Protonation of free fatty acids in the bilayer promotes attractive cellulose-bilayer interactions. We identified two major factors that control the cellulose-skin interactions: (i) the electrostatic repulsion between a cellulose crystal and the charged (anionic due to deprotonated fatty acids) surface of a stratum corneum bilayer and (ii) the cellulose-stratum corneum hydrogen bonding. When less than half of the fatty acids in the bilayer are protonated, the first factor dominates and there is no binding to skin. At a larger degree of fatty acid protonation the cellulose-stratum corneum hydrogen bonding prevails yielding a tight binding. Remarkably, we found that ceramide molecules are the key component in hydrogen bonding with cellulose. Overall, our findings highlight the critical role of fatty acid protonation in biomaterial-stratum corneum interactions and can be used for optimizing the surface properties of cellulose-based materials aimed at biomedical applications such as wound dressings.

The Emerging Trend of Bio-Engineering Approaches for Microbial Nanomaterial Synthesis and Its Applications

Micro-organisms colonized the world before the multi-cellular organisms evolved. With the advent of microscopy, their existence became evident to the mankind and also the vast processes they regulate, that are in direct interest of the human beings. One such process that intrigued the researchers is the ability to grow in presence of toxic metals. The process seemed to be simple with the metal ions being sequestrated into the inclusion bodies or cell surfaces enabling the conversion into nontoxic nanostructures. However, the discovery of genome sequencing techniques highlighted the genetic makeup of these microbes as a quintessential aspect of these phenomena. The findings of metal resistance genes (MRG) in these microbes showed a rather complex regulation of these processes. Since most of these MRGs are plasmid encoded they can be transferred horizontally. With the discovery of nanoparticles and their many applications from polymer chemistry to drug delivery, the demand for innovative techniques of nanoparticle synthesis increased dramatically. It is now established that microbial synthesis of nanoparticles provides numerous advantages over the existing chemical methods. However, it is the explicit use of biotechnology, molecular biology, metabolic engineering, synthetic biology, and genetic engineering tools that revolutionized the world of microbial nanotechnology. Detailed study of the micro and even nanolevel assembly of microbial life also intrigued biologists and engineers to generate molecular motors that mimic bacterial flagellar motor. In this review, we highlight the importance and tremendous hidden potential of bio-engineering tools in exploiting the area of microbial nanoparticle synthesis. We also highlight the application oriented specific modulations that can be done in the stages involved in the synthesis of these nanoparticles. Finally, the role of these nanoparticles in the natural ecosystem is also addressed.

Characterization of Bacterial Cellulose-Based Wound Dressing in Different Order Impregnation of Chitosan and Collagen

Bacterial cellulose (BC), chitosan (Chi), and collagen (Col) are known as biopolymers which have met some properties that are required as wound dressing. This study focused on investigating the fabrication of BC-based wound dressing with chitosan and collagen, since chitosan has red blood cells binding and anti-bacterial properties, while collagen can support cell and tissue growth for skin wounds. The BC-based wound dressing was prepared by impregnating BC fibers in the chitosan and/or collagen solution for 24 h. FTIR was used to confirm the intermolecular interaction of amine and hydroxyl group of chitosan and/or collagen in BC-based wound dressing. Furthermore, the XRD diffractogram of the wound dressing show broader peaks at 14.2°, 16.6°, and 22.4° due to the presence of chitosan and collagen molecules in BC fibers. These results were then supported by SEM images which confirmed that chitosan and collagen were well penetrated into BC fibers. TGA curves revealed that BC/Chi/Col has better thermal properties based on the Tmax compare to BC/Col/Chi. Feasibility of the mats to be applied as wound dressing was also supported by other tests, i.e., water content, porosity, and hemocompatibility, which indicates that the wound dressing is classified as nonhemolytic materials. However, BC/Col/Chi was considered a more potential wound dressing to be applied compared to BC/Chi/Col since it has larger pores and showed better antibacterial properties (larger zones of inhibition) against S. aureus and E. coli via disk diffusion tests.

Bacterial Nanocellulose and Titania Hybrids: Cytocompatible and Cryopreservable Cell Carriers

Carrier-assisted cell transplantation offers new strategies to improve the clinical outcomes of cellular therapies. Bacterial nanocellulose (BC) is an emerging biopolymer that might be of great value in the development of animal-free, customizable, and temperature-stable novel cell carriers. Moreover, BC exhibits a myriad of modification possibilities to incorporate additional functionalities. Here, we have synthesized BC-titanium dioxide (TiO₂) nanocomposites (BC/TiO₂) to evaluate and compare the suitability of not only BC but also a model hybrid nanobiomaterial as cell transplantation supports. This work provides thorough information on the interactions between BC-based substrates and model human cells in terms of cell attachment, morphology, proliferation rate, and metabolic activity. Two methods to partially retrieve the adhered cells are also reported. Both BC and BC/TiO₂ substrates are positively evaluated in terms of cytocompatibility and endotoxin content without detecting major differences between BC and BC nanocomposites. Lastly, the effective cryopreservation of cells-BC and cells-BC/TiO₂ constructs, yielding high cell viability and intact cell carrier's characteristics after thawing, is demonstrated. Taken together, our results show that both BC and BC/TiO₂ enable to integrate the processes of expansion and long-term storage of human cells in transportable, robust and easy to manipulate supports.

Fabrication and In-Vivo Study of Micro-Colloidal Zanthoxylum acanthopodium-Loaded Bacterial Cellulose as a Burn Wound Dressing

Bacterial cellulose (BC) is a biopolymer commonly used for wound dressing due to its high biocompatible properties either in-vitro or in-vivo. The three-dimensional fiber structure of BC becomes an advantage because it provides a template for the impregnation of materials in order to improve BC's properties as a wound dressing, since BC has not displayed any bioactivity properties. In this study, micro-colloidal Zanthoxylum acanthopodium (MZA) fruit was loaded into BC fibers via an in-situ method. Z. acanthopodium is known to have anti-inflammatory, antioxidant and antimicrobial activities that can support BC to accelerate the wound healing process. The FTIR, XRD and SEM analysis results showed that the loading process of MZA and the composite fabrication were successfully carried out. The TGA test also showed that the presence of MZA in BC fibers decreased Tmax composite from BC, from 357.8 to 334.5 °C for BC-MZA3. Other aspects, i.e., water content, porosity, hemocompatibility and histology studies, also showed that the composite could potentially be used as a wound dressing.

Bacterial Cellulose as a Versatile Platform for Research and Development of Biomedical Materials

The unique pool of features found in intracellular and extracellular bacterial biopolymers attracts a lot of research, with bacterial cellulose (BC) being one of the most versatile and common. BC is an exopolysaccharide consisting solely of cellulose, and the variation in the production process can vary its shape or even its composition when compounding is applied in situ. Together with ex situ modification pathways, including specialised polymers, particles or exclusively functional groups, BC provides a robust platform that yields complex multifunctional compounds that go far beyond ultra-high purity, intrinsic hydrophilicity, mechanical strength and biocompatibility to introduce bioactive, (pH, thermal, electro) responsive, conductive and ‘smart’ properties. This review summarises the research outcomes in BC-medical applications, focusing mainly on data from the past decade (i.e., 2010–2020), with special emphasis on BC nanocomposites as materials and devices applicable in medicine. The high purity and unique structural/mechanical features, in addition to its capacity to closely adhere to irregular skin surfaces, skin tolerance, and demonstrated efficacy in wound healing, all stand as valuable attributes advantageous in topical drug delivery. Numerous studies prove BC compatibility with various human cells, with modifications even improving cell affinity and viability. Even BC represents a physical barrier that can reduce the penetration of bacteria into the tissue, but in its native form does not exhibit antimicrobial properties, therefore carious modifications have been made or specific compounds added to confer antimicrobial or anti-inflammatory properties. Progress in the use of BC-compounds as wound dressings, vascular grafts, and scaffolds for the treatment of cartilage, bone and osteochondral defects, the role as a basement membrane in blood-brain barrier models and many more are discussed to particular extent, emphasising the need for BC compounding to meet specific requirements.

Improved Hydrophobicity of a Bacterial Cellulose Surface: Click Chemistry in Action

The vast application potentials of bacterial cellulose (BC)-based materials for developing leather-like materials, wound-healing materials and electronic materials have been realized very recently. Surface functionalization of these materials can help in improvement of certain properties such as water repellency, mechanical strength, and so forth. In this paper, we reported functionalization of BC surfaces using "click" polymerization for the first time. By this methodology, dense aromatic groups have been incorporated for the improvement of hydrophobicity. For comparative studies, various fluorine-based compounds have been introduced using conventional click reactions. The surface-modified BC materials have been confirmed by various spectroscopic methods. Particularly, the chemical structures of the materials were studied by solid-state ¹³C NMR spectroscopy and attenuated total reflection-infrared spectroscopy. X-ray photoelectron spectroscopy was used to study the elemental composition of the materials. Moreover, the crystallite changes of modified BC surfaces were investigated by X-ray diffraction. Further, the changes in the morphology of the material after functionalization were evaluated by scanning electron microscopy and atomic force microscopy. Finally, water contact angle measurement revealed manyfold increase in hydrophobicity after click polymerization. A video is also provided in the Supporting Information to show the application potential of this material for developing leather-like materials.

Applications of bacterial-synthesized cellulose in veterinary medicine – a review

Tissue engineering promotes tissue regeneration through biomaterials that have excellent properties and have the potential to replace tissues. Many studies show that bacterial cellulose (BC) might ensure tissue regeneration and substitution, being used for the bioengineering of hard, cartilaginous and soft tissues. Bacterial cellulose is extensively used as wound dressing material and results show that BC is a promising tissue scaffold (bone, cardiovascular, urinary tissue). It can be combined with polymeric and non-polymeric compounds to acquire antimicrobial, cell-adhesion and proliferation properties. To ensure proper tissue regeneration, the material has to be: biocompatible, with minimum tissue reaction and biodegradability; bio-absorbable, to promote tissue development, cellular interaction and grow; resistant to support the weight of the newly formed tissue. Its versatile structure, physical and biochemical properties can be adjusted by adapting the bacteria culturing conditions. The main biomedical applications seem to be as hard (bone, dental), fibrocartilaginous (meniscal) and soft tissue (skin, cardiovascular, urinary) substituents. This paper reviews the current state of knowledge, challenges and future applications of BC and its biomedical potential in veterinary medicine. It was focused on the main uses in regeneration and scaffold tissue replacement and, although BC showed promising results, there is a lack of successful results of BC use in clinical practice. Most studies were performed only at experimental level and further research is needed for BC to enter clinical veterinary practice.

Urethra-inspired biomimetic scaffold: A therapeutic strategy to promote angiogenesis for urethral regeneration in a rabbit model

Limited angiogenesis and epithelialization make urethral regeneration using conventional tissue-engineered grafts a great challenge. Consequently, inspired from the native urethra, bacterial cellulose (BC) and bladder acellular matrix (BAM) were combined to design a three dimensional (3D) biomimetic scaffold. The developed BC/BAM scaffold was engineered for accelerating urethral regeneration by enhancing angiogenesis and epithelialization. The BC/BAM scaffold reveals the closest mimic of native urethra in terms of the 3D porous nanofibrous structure and component including collagen, glycosaminoglycans, and intrinsic vascular endothelial growth factor (VEGF). In vitro studies showed that the bioinspired BC/BAM scaffold promoted in vitro angiogenesis by facilitating human umbilical vein endothelial cells (HUVECs) growth, expression of endothelial function related proteins and capillary-like tube formation. Effect of the BC/BAM scaffold on angiogenesis and epithelialization was studied by its implantation in a rabbit urethral defect model for 1 and 3 months. Results demonstrated that the improved blood vessels formation in the urethra-inspired BC/BAM scaffold significantly promoted epithelialization and accelerated urethral regeneration. The urethra-inspired BC/BAM scaffold provides us a new design approach to construct grafts for urethral regeneration. STATEMENT OF SIGNIFICANCE: Findings in urethral regeneration demonstrate that an ideal tissue-engineered urethra should have adequate angiogenesis to support epithelialization for urethral regeneration in vivo. In this study, inspired from the native urethra, a bioinspired bacterial cellulose/bladder acellular matrix (BC/BAM) scaffold was developed to promote angiogenesis and epithelialization. The designed scaffold showed the closest physical structure and component to natural urethra, which is beneficial to angiogenesis and regeneration of urethral epithelium. This is the first time to utilize BC and dissolved BAM to develop biomimetic scaffold in urethral tissue engineering. Our biomimetic strategy on urethra graft design provided enhanced angiogenesis and epithelialization to achieve an accelerated and successful rabbit urethral repair. We believe that our urethra-inspired biomimetic scaffold would provide new insights into the design of urethral tissue engineering grafts.

Construction of cellulose nanofibers/quaternized chitin/organic rectorite composites and their application as wound dressing materials

Traumatic injury is a major cause of mortality, and poor wound healing affects millions of people. Thus, the development of effective wound dressings is essential for speeding up wound healing and decreasing mortality. In this study, a suspension of carboxylated brown algae cellulose nanofibers (BACNFs) with a high aspect ratio was freeze dried to prepare a sponge. The sponge showed high porosity and water absorption capacity; thus, it can absorb wound exudates when used as a wound dressing. In addition, quaternized β-chitin (QC) with antibacterial properties was intercalated into the interlayer space of the organic rectorite (OREC) via electrostatic interactions to obtain composite suspensions (QCRs) with improved antimicrobial activity compared to that of QC alone. Subsequently, the BACNF sponge was soaked in the QCR suspension to absorb QCRs via electrostatic interactions and hydrogen bonding from which cellulose nanofiber/quaternized chitin/organic rectorite composite (BACNF/QCR) sponges were constructed via freeze-drying. The in vivo animal tests demonstrated that the BACNF/QCR sponges rapidly induced hemostasis in a rat tail amputation test, making them superior to the traditional hemostatic materials. Furthermore, BACNFs/QCRs could substantially promote collagen synthesis and neovascularization, thereby accelerating wound healing 3 days earlier than gauze. This multi-functional biomedical material, fabricated using natural substances, shows great potential to be used for wound healing.

Controlled On-Off Switching of Tight-Binding Hydrogen Bonds between Model Cell Membranes and Acetylated Cellulose Surfaces

Controlling interactions between cellulose-based materials and membranes of living cells is critical in medicine and biotechnology in, for example, wound dressing, tissue engineering, hemodialysis membranes, and drug transport. Cellulose acetylation is a widely used approach to tuning those interactions. Surprisingly, however, detailed interactions of acetylated cellulose and membranes have thus far not been characterized. Using atomistic molecular dynamics (MD) simulations, we show that the key to such control is hydrogen bonds: by tuning the number of hydrogen bonds between tissue (cell membranes) and cellulose, binding can be controlled in a precise manner. We demonstrate that the acetylation of each hydroxymethyl group reduces the free energy of cellulose-membrane binding by an order of magnitude as compared to that of pristine cellulose. Remarkably, this acetylation-induced weakening does not occur gradually and is characterized by a sharp threshold in the degree of substitution, beyond which the microscopic character of lipid-cellulose interactions changes drastically. When the degree of substitution does not exceed 0.125, the cellulose-lipid interactions are mainly driven by hydrogen bonding between cellulose's hydroxyl groups and phosphate groups of lipid molecules. This results in the tight binding of a cellulose crystal and a lipid bilayer. Larger degrees of substitution (here, 0.25 and 0.5) prevent hydrogen bonding, leading to rather weak and unstable cellulose-bilayer binding. In this case, the lipid-cellulose binding is controlled by the interactions of lipid choline groups with hydroxyl(hydroxymethyl) groups and carbonyl groups of acetyl moieties of acetylated cellulose.

Bacterial Cellulose: Production, Modification and Perspectives in Biomedical Applications

Bacterial cellulose (BC) is ultrafine, nanofibrillar material with an exclusive combination of properties such as high crystallinity (84%-89%) and polymerization degree, high surface area (high aspect ratio of fibers with diameter 20-100 nm), high flexibility and tensile strength (Young modulus of 15-18 GPa), high water-holding capacity (over 100 times of its own weight), etc. Due to high purity, i.e., absence of lignin and hemicellulose, BC is considered as a non-cytotoxic, non-genotoxic and highly biocompatible material, attracting interest in diverse areas with hallmarks in medicine. The presented review summarizes the microbial aspects of BC production (bacterial strains, carbon sources and media) and versatile in situ and ex situ methods applied in BC modification, especially towards bionic design for applications in regenerative medicine, from wound healing and artificial skin, blood vessels, coverings in nerve surgery, dura mater prosthesis, arterial stent coating, cartilage and bone repair implants, etc. The paper concludes with challenges and perspectives in light of further translation in highly valuable medical products.

Latest Advances on Bacterial Cellulose-Based Materials for Wound Healing, Delivery Systems, and Tissue Engineering

Bacterial cellulose (BC) is a nanocellulose form produced by some nonpathogenic bacteria. BC presents unique physical, chemical, and biological properties that make it a very versatile material and has found application in several fields, namely in food industry, cosmetics, and biomedicine. This review overviews the latest state-of-the-art usage of BC on three important areas of the biomedical field, namely delivery systems, wound dressing and healing materials, and tissue engineering for regenerative medicine. BC will be reviewed as a promising biopolymer for the design and development of innovative materials for the mentioned applications. Overall, BC is shown to be an effective and versatile carrier for delivery systems, a safe and multicustomizable patch or graft for wound dressing and healing applications, and a material that can be further tuned to better adjust for each tissue engineering application, by using different methods.

Bioapplications of Bacterial Cellulose Polymers Conjugated with Resveratrol for Epithelial Defect Regeneration

Excellent wound dressing is essential for effective wound repair and regeneration. However, natural polymeric skin substitutes often lack mechanical strength and hydrophilicity. One way to overcome this limitation is to use biodegradable polymers with high mechanical strength and low skin-irritation induction in wet environments. Bacterial cellulose (BC) is an attractive polymer for medical applications; unlike synthetic polymers, it is biodegradable and renewable and has a strong affinity for materials containing hydroxyl groups. Therefore, we conjugated it with resveratrol (RSV), which has a 4'-hydroxyl group and exhibits good biocompatibility and no cytotoxicity. We synthesized BC scaffolds with immobilized RSV and characterized the resulting BC/RSV scaffold with scanning electron microscopy and Fourier-transform infrared spectroscopy. We found that RSV was released from the BC in vitro after ~10 min, and immunofluorescence staining showed that BC was highly biocompatible and regenerated epithelia. Additionally, Masson's trichrome staining showed that the scaffolds preserved the normal collagen-bundling pattern and induced re-epithelialization in defective rat epidermis. These results indicated that RSV-conjugated BC created a biocompatible environment for stem cell attachment and growth and promoted epithelial regeneration during wound healing.

Nanocellulose-based polymer hybrids and their emerging applications in biomedical engineering and water purification

Nanocellulose, derived from cellulose hydrolysis, has unique optical and mechanical properties, high surface area, and good biocompatibility. It is frequently used as a reinforcing agent to improve the native properties of materials. The presence of functional groups in its surface enables the alteration of its behavior and its use under different conditions. Nanocellulose is typically used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). CNCs and CNFs have a high aspect ratio with typical lengths of ∼100-250 nm and 0.1-2 μm, respectively; BNC is nanostructured cellulose produced by bacteria. Nanohybrid materials are a combination of organic or inorganic nanomaterials with macromolecules forming a single composite and typically exhibit superior optical, thermal, and mechanical properties to those of native polymers, owing to the greater interactions between the macromolecule matrix and the nanomaterials. Excellent biocompatibility and biodegradability make nanocellulose an ideal material for applications in biomedicine. Unlike native polymers, nanocellulose-based nanohybrids exhibit a sustained drug release ability, which can be further optimized by changing the content or chemical environment of the nanocellulose, as well as the external stimuli, such as the pH and electric fields. In this review, we describe the process of extraction of nanocellulose from different natural sources; its effects on the structural, morphological, and mechanical properties of polymers; and its various applications.

Opportunities of Bacterial Cellulose to Treat Epithelial Tissues

In this mini-review, we highlight the potential of the biopolymer bacterial cellulose to treat damaged epithelial tissues. Epithelial tissues are cell sheets that delimitate both the external body surfaces and the internal cavities and organs. Epithelia serve as physical protection to underlying organs, regulate the diffusion of molecules and ions, secrete substances and filtrate body fluids, among other vital functions. Because of their continuous exposure to environmental stressors, damage to epithelial tissues is highly prevalent. Here, we first compare the properties of bacterial cellulose to the current gold standard, collagen, and then we examine the use of bacterial cellulose patches to heal specific epithelial tissues; the outer skin, the ocular surface, the oral mucosa and other epithelial surfaces. Special emphasis is made on the dermis since, to date, this is the most widespread medical use of bacterial cellulose. It is important to note that some epithelial tissues represent only the outermost layer of more complex structures such as the skin or the cornea. In these situations, depending on the penetration of the lesion, bacterial cellulose might also be involved in the regeneration of, for instance, inner connective tissue.

Probing adhesion between nanoscale cellulose fibres using AFM lateral force spectroscopy: The effect of hemicelluloses on hydrogen bonding

Inter-fibre adhesion is a key contributing factor to the mechanical response and functionality of cellulose-based biomaterials. 'Dip-and-Drag' lateral force atomic force microscopy technique is used here to evaluate the influence of arabinoxylan and xyloglucan on interactions between nanoscale cellulose fibres within a hydrated network of bacterial cellulose. A cohesive zone model of the detachment event between two nano-fibres is used to interpret the experimental data and evaluate inter-fibre adhesion energy. The presence of xyloglucan or arabinoxylan is found to increase the adhesive energy by a factor of 4.3 and 1.3, respectively, which is consistent with these two hemicellulose polysaccharides having different specificity of hydrogen bonding with cellulose. Importantly, xyloglucan's ability to strengthen adhesion between cellulose nano-fibres supports emergent models of the primary plant cell walls (Park & Cosgrove, 2012b), which suggest that xyloglucan chains confined within cellulose-cellulose junctions play a key role in cell wall's mechanical response.

Microfluidic Fabrication of Bioinspired Cavity-Microfibers for 3D Scaffolds

We present a gas-in-water microfluidic method to precisely fabricate well-controlled versatile microfibers with cavity knots (named cavity-microfiber), like tiny-cavity-microfiber, hybrid-cavity-microfiber, cavity-microfiber, and chained microfiber. The cavity-microfibers are endowed with tunable morphologies, unique surface properties, high specific surface area, assembling ability, flexibility, cytocompatibility, and hydroscopicity. We assemble cavity-microfibers as 3D scaffolds for culturing the human umbilical vein endothelial cells (HUVECs) and dehumidifying. The HUVECs on the scaffolds demonstrate good cell viability and 3D HUVECs frameworks, confirming the unique cytocompatibility of cavity-microfiber. And the cavity-microfibers and their scaffolds also demonstrate excellent dehumidifying ability and large-scale dehumidifying, respectively. Our cavity-microfiber can offer a broad range of applications in sensor, wearable electronics, dehumidifying, water collection engineering, drug delivery, biomaterials, and tissue engineering.