Nanoparticle-Patterned Multicompartmental Chitosan Capsules for Oral Delivery of Oligonucleotides

From Nature-Sourced Polysaccharide Particles to Advanced Functional Materials

Polysaccharides constitute over 90% of the carbohydrate mass in nature, which makes them a promising feedstock for manufacturing sustainable materials. Polysaccharide particles (PSPs) are used as effective scavengers, carriers of chemical and biological cargos, and building blocks for the fabrication of macroscopic materials. The biocompatibility and degradability of PSPs are advantageous for their uses as biomaterials with more environmental friendliness. This review highlights the progresses in PSP applications as advanced functional materials, by describing PSP extraction, preparation, and surface functionalization with a variety of functional groups, polymers, nanoparticles, and biologically active species. This review also outlines the fabrication of PSP-derived macroscopic materials, as well as their applications in soft robotics, sensing, scavenging, water harvesting, drug delivery, and bioengineering. The paper is concluded with an outlook providing perspectives in the development and applications of PSP-derived materials.

Mucoadhesive chitosan microcapsules for controlled gastrointestinal delivery and oral bioavailability enhancement of low molecular weight peptides

A bioactive compound, collagen peptide (CP), is widely used for biological activities such as anti-photoaging and antioxidant effects, with increased oral bioavailability because of its low molecular weight and high hydrophilicity. However, controlling release time and increasing retention time in the digestive tract for a more convenient oral administration is still a challenge. We developed CP-loaded chitosan (CS) microcapsules via strong and rapid ionic gelation using a highly negative phytic acid (PA) crosslinker. The platform enhanced the oral bioavailability of CP with controlled gastrointestinal delivery by utilizing the mucoadhesiveness and tight junction-opening properties of CS. CS and CP concentrations varied from 1.5 to 3.5% and 0-30%, respectively, for optimal and stable microcapsule synthesis. The physicochemical properties, in vitro release profile with intestinal permeability, in vivo oral bioavailability, in vivo biodistribution, anti-photoaging effect, and antioxidant effect of optimized CS microcapsules were analyzed to investigate the impact of controlling parameters. The structure of CS microcapsules was tuned by PA diffused gradient ionic cross-linking degree, resulting in a controlled CP release region in the gastrointestinal tract. The optimized microcapsules increased Cmax, AUC, and tmax by 1.5-, 3.4-, and 8.0-fold, respectively. Furthermore, CP in microcapsules showed anti-photoaging effects by downregulating matrix metalloproteinases-1 via antioxidant effects. According to our knowledge, this is the first study to microencapsulate CP for oral bioavailability enhancement. The peptide delivery method employed is simple, economical, and can be applied to customize bioactive compound administration.

Colon targeted releases and uptakes of paclitaxel loaded in modified porous starch

Hyaluronic acid can modify porous starch through cross-linking and hydrogen bonding, effectively achieving a paclitaxel entrapment efficiency of ∼92 % and drug loading of ∼23 %. In this study, the pores and intergranular gaps of porous starch were filled with paclitaxel under solvent volatilization, and the enrichment process and its characteristics were recorded using a microscope. The paclitaxel-loaded particles were coated with chitosan-phytic acid to target the colon. In vivo imaging in mice showed that the capsule released paclitaxel in the colon rather than in the upper digestive tract, and the paclitaxel distribution in the main organs at 24 h was significantly lower than that of raw paclitaxel. Hyaluronic acid-modified porous starch can target cancer cells. Cell internalization of paclitaxel mediated by hyaluronic acid was approximately 1.97 times that of raw paclitaxel, higher than that of receptor-shielded cells and cells incubated with unmodified carriers, as evidenced by the accumulation of fluorescent paclitaxel in the nucleus and marked cell apoptosis. The hyaluronic acid-modified porous starch system is an effective method for the high-load and targeted release of hydrophobic anticancer drugs.

Evaluation of the Anti-Inflammatory Pain Effect of Ginsenoside-Conjugated O-Carboxymethyl Chitosan Particles

Nanoparticle delivery of functional molecules or vaccines is an effective method for the treatment of many diseases. This study aims to design ginsenoside Rh2-conjugated O-carboxymethyl chitosan (O-CMC/Rh2) as a drug delivery system and explore its anti-nociceptive effects. O-CMC/Rh2 was synthesized with an esterification reaction, and its chemical composition and morphology were evaluated using proton nuclear magnetic resonance (1H NMR), the attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and scanning electron microscopy (SEM). In addition, the in vitro cumulative release of Rh2 from the O-CMC/Rh2 was also evaluated under different pH conditions. The results showed that the ginsenoside Rh2 was successfully conjugated to the O-CMC matrix and exhibited a highly porous structure after conjugation, facilitating the release of Rh2 from O-CMC. Complete Freund's adjuvant (CFA) and burn injury-induced pain models were used to evaluate the anti-nociceptive effects of O-CMC/Rh2 on inflammatory pain. O-CMC/Rh2 reduced CFA-induced pain hypersensitivity in a dose-dependent manner and had a longer analgesic effect than Rh2. In addition, O-CMC/Rh2 also relieved the chronic pain induced by bury injury. These results indicated that O-CMC/Rh2 could be useful in reducing inflammatory pain, thus possessing a potential medicinal application in pain therapy.

Crosslinkers for polysaccharides and proteins: Synthesis conditions, mechanisms, and crosslinking efficiency, a review

Polysaccharides and proteins are important macromolecules for developing hydrogels devoted to biomedical applications. Chemical hydrogels offer chemical, mechanical, and dimensional stability than physical hydrogels due to the chemical bonds among the chains mediated by crosslinkers. There are many crosslinkers to synthesize polysaccharides and proteins based on hydrogels. In this review, we revisited the crosslinking reaction mechanisms between synthetic or natural crosslinkers and polysaccharides or proteins. The selected synthetic crosslinkers were glutaraldehyde, carbodiimide, boric acid, sodium trimetaphosphate, N,N'-methylene bisacrylamide, and polycarboxylic acid, whereas the selected natural crosslinkers included transglutaminase, tyrosinase, horseradish peroxidase, laccase, sortase A, genipin, vanillin, tannic acid, and phytic acid. No less important are the reactions involving click chemistry and the macromolecular crosslinkers for polysaccharides and proteins. Literature examples of polysaccharides or proteins crosslinked by the different strategies were presented along with the corresponding highlights. The general mechanism involved in chemical crosslinking mediated by gamma and UV radiation was discussed, with particular attention to materials commonly used in digital light processing. The evaluation of crosslinking efficiency by gravimetric measurements, rheology, and spectroscopic techniques was presented. Finally, we presented the challenges and opportunities to create safe chemical hydrogels for biomedical applications.

Thermoresponsive semi-interpenetrating gelatin-alginate networks for encapsulation and controlled release of scent molecules

Plant-based meats, which are nutritious foods from non-animal sources, provide clues for addressing the negative externalities associated with conventional meat production. Interest in plant-based meat has increased and is driving the rapid growth of its market. Plant-based meat should be equipped with a temperature-dependent scent release system similar to the scent release mechanism of conventional meat, to deliver a desirable meat-like flavor to consumers and obtain higher market acceptance. In this study, we prepared thermoresponsive gelatin-alginate hybrid hydrogels to control the release of scent molecules. The polymer network of gelatin-alginate hydrogels was reinforced by a semi-interpenetrating network (sIPN). sIPN formation conferred resistance to external stimuli, such as shear force, swelling, and temperature, resulting in a sustained release of the meat scent. In addition, controlled size microcapsules fabricated from the same composition via an electrostatic extrusion process showed a sustained release pattern of the loaded scent at 70 °C, and the scent release rate was precisely controlled within an approximately 2-fold range by adjusting the alginate concentration. These observations suggest the potential use of edible biological macromolecules as food additives that can control the release of scent molecules from the plant-based meat during cooking.

Cellulose nanocrystals as support nanomaterials for dual droplet-based freeform 3D printing

The selection of sacrificial support materials is important in the fabrication of complex freeform structures. In this study, a dual droplet-based, freeform 3D printing method for pseudoplastic alginate biomaterial inks was developed using Bingham plastic cellulose nanocrystals (CNCs) as support nanomaterials. CNCs-CaCl2 mixture compositions and alginate concentrations were varied to enhance printability with rheological properties of shape fidelity and structural stability. The mixtures supported the shape of alginate and allowed CaCl2 diffusion-based cross-linking during 3D printing. The hydrogels showed rheological and physicochemical properties similar to those of pure alginate hydrogel, as CNCs were removed during post-printing processing. BSA-loaded multi-layered spheres, freeform 3D-printed for oral protein drug delivery, protected BSA in the gastric environment and provided controlled and sustained release of BSA into the intestinal environment as layer width and alginate concentration increased. This method can facilitate freeform 3D printing of diverse pseudoplastic biomaterial inks for biomedical applications.

Nanocomposite sponges for enhancing intestinal residence time following oral administration

In this work, nanocomposites that combine mucopenetrating and mucoadhesive properties in a single system are proposed as innovative strategy to increase drug residence time in the intestine following oral administration. To this aim, novel mucoadhesive chitosan (CH) sponges loaded with mucopenetrating nanoemulsions (NE) were developed via freeze-casting technique. The NE mucopenetration ability was determined studying the surface affinity and thermodynamic binding of the nanosystem with mucins. The ability of nanoparticles to penetrate across a preformed mucins layer was validated by 3D-time laps Confocal Laser Scanning Microscopy imaging. Microscopy observations (Scanning Electron Microscopy and Optical Microscopy) showed that NE participated in the structure of the sponge affecting its stability and in vitro release kinetics. When incubated with HCT 116 and Caco-2 cell lines, the NE proved to be cytocompatible over a wide concentration range. Finally, the in vivo biodistribution of the nanocomposite was evaluated after oral gavage in healthy mice. The intestinal retention of NE was highly enhanced when loaded in the sponge compared to the NE suspension. Overall, our results demonstrated that the developed nanocomposite sponge is a promising system for sustained drug intestinal delivery.

Nanocomposite systems for precise oral delivery of drugs and biologics

Oral delivery is considered the favoured route of administration for both local and systemic delivery of active molecules. Formulation of drugs in conventional systems and nanoparticles has provided opportunities for targeting the gastrointestinal (GI) tract, increasing drug solubility and bioavailability. Despite the achievements of these delivery approaches, the development of a product with the ability of delivering drug molecules at a specific site and according to patients' needs remains a challenging endeavour. The complexity of the physicochemical properties of colloidal systems, their stability in different regions of the gastrointestinal tract, and interaction with the restrictive biological barriers hampered their success for oral precise medicine. To overcome these issues, nanoparticles have been combined with polymers to create hybrid nanosystems, namely nanocomposites. They offer enormous possibilities of structural and mechanical modifications to both nanoparticles and polymeric matrixes to generate systems with new properties, functions, and applications for oral delivery. In this review, nanocomposites' physicochemical and functional properties intended to target specific regions of the GI tract-oral cavity, stomach, small bowel, and colon-are analysed. In parallel, it is provided an insight in the nanocomposite solutions for oral delivery intended for systemic and local absorption, together with a focus on inflammatory bowel diseases (IBDs). Additional difficulties in managing IBD related to the alteration in the physiology of the intestine are described. Finally, future perspectives and opportunities for advancement in this field are discussed.

Multifunctional biomolecule nanostructures for cancer therapy

Biomolecule-based nanostructures are inherently multifunctional and harbour diverse biological activities, which can be explored for cancer nanomedicine. The supramolecular properties of biomolecules can be precisely programmed for the design of smart drug delivery vehicles, enabling efficient transport in vivo, targeted drug delivery and combinatorial therapy within a single design. In this Review, we discuss biomolecule-based nanostructures, including polysaccharides, nucleic acids, peptides and proteins, and highlight their enormous design space for multifunctional nanomedicines. We identify key challenges in cancer nanomedicine that can be addressed by biomolecule-based nanostructures and survey the distinct biological activities, programmability and in vivo behaviour of biomolecule-based nanostructures. Finally, we discuss challenges in the rational design, characterization and fabrication of biomolecule-based nanostructures, and identify obstacles that need to be overcome to enable clinical translation.

Self-Assembled Organic Nanomaterials for Drug Delivery, Bioimaging, and Cancer Therapy

Over the past few decades, tremendous progress has been made in the development of engineering nanomaterials, which opened new horizons in the field of diagnosis and treatment of various diseases. In particular, self-assembled organic nanomaterials with intriguing features including delicate structure tailoring, facile processability, low cost, and excellent biocompatibility have shown outstanding potential in biomedical applications because of the enhanced permeability and retention (EPR) effect and multifunctional properties. In this review, we briefly introduce distinctive merits of self-assembled organic nanomaterials for biomedical applications. The main focus will be placed on summarizing recent advances in self-assembled organic nanomedicine for drug delivery, bioimaging, and cancer phototherapy, followed by highlighting a critical perspective on further development of self-assembled organic nanomaterials for future clinical translation. We believe that the above themes will appeal to researchers from different fields, including material, chemical, and biological sciences, as well as pharmaceutics.

Optimization of phytic acid-crosslinked chitosan microspheres for oral insulin delivery using response surface methodology

Although oral administration is favorable mode of insulin delivery, it is the most challenging route, owing to poor oral bioavailability. In this study, a chitosan (CS)-based insulin delivery system was developed by ionic crosslinking with phytic acid (PA). CS-PA microspheres were optimized with different crosslinking conditions of CS and PA using response surface methodology to retain insulin during preparation and gastric digestion. Furthermore, the in vitro release profile, morphological structure, cytotoxicity, and intestinal permeability of the optimized microspheres, and its hypoglycemic effect in diabetic rats were evaluated. Under optimal conditions, the entrapment efficiency was 97.1%, and 67.0% of insulin was retained in the microspheres after 2 h of gastric digestion followed by a sustained-release in intestinal fluid. Insulin was primarily distributed in the microsphere core with a monodisperse diameter of 663.3 μm. The microspheres increased the permeability of insulin across Caco-2/HT-29 monolayers by 1.6 times with negligible cytotoxicity. The microspheres had a relative pharmacological bioavailability of 10.6% and significantly reduced blood glucose levels with a long-lasting hypoglycemic effect after oral administration in diabetic rats. This study demonstrated that an optimized formulation of a simple ionic crosslinking system using CS and PA could facilitate efficient oral delivery of insulin.

Chitosan coating of zein-carboxymethylated short-chain amylose nanocomposites improves oral bioavailability of insulin in vitro and in vivo

Non-invasive means of insulin administration circumvent some of the inconveniences of injections. Oral administration in particular is convenient, pain-free, and allows favorable glucose homeostasis, but is subject to chemical instability, enzymatic degradation, and poor gastrointestinal absorption. Natural polymeric nanoparticles have emerged as a promising oral delivery system for peptide therapeutics due their safety, biocompatibility, and stability. In this study, self-assembled nanocomposites from chitosan (CS) and insulin-loaded, zein-carboxymethylated short-chain amylose (IN-Z-CSA) nanocomposites were synthesized to improve oral bioavailability of insulin. The optimized IN-Z-CSA/CS_0.2% nanocomposites exhibited an average size of 311.32±6.98 nm, a low polydispersity index (0.227±0.01), a negative zeta potential (43.77±1.36 mV), an encapsulation efficiency of 89.6±0.9%, and a loading capacity of 6.8±0.4%. The IN-Z-CSA/CS_0.2% nanocomposites were stable in storage conditions. The transepithelial permeability of the N-Z-CSA/CS_0.2% nanocomposites was 12-fold higher than that of insulin. Cellular uptake studies revealed that the IN-Z-CSA/CS_0.2% nanocomposites were internalized into Caco-2 cells by both endocytosis and a paracellular route. Additionally, in pharmacological studies, orally administered IN-Z-CSA/CS_0.2% nanocomposites had a stronger hypoglycemic effect with a relative bioavailability of 15.19% compared with that of IN-Z-CSA_1.0% nanocomposites. Furthermore, cell toxicity and in vivo tests revealed that the IN-Z-CSA/CS_0.2% nanocomposites were biocompatible. Overall, these results indicate that the IN-Z-CSA/CS_0.2% nanocomposites can improve oral bioavailability of insulin and are a promising delivery system for insulin or other peptide/protein drugs.

Chondrogenesis of human mesenchymal stem cells by microRNA loaded triple polysaccharide nanoparticle system

Degenerative cartilage is the pathology of severe depletion of extracellular matrix components in articular cartilage. In diseases like osteoarthritis, misregulation of microRNAs contributes the pathology and collectively leads to disruption of the homeostasis. In this study chondroitin sulfate/hyaluronic acid/chitosan nanoparticles were prepared and successfully characterized chemically and morphologically. Results demonstrated higher chondroitin sulfate amounts led smaller nanoparticles, but lower surface zeta potential due to high electronegativity. After optimization of chondroitin sulfate amounts regarding size and charge, nanoparticles were loaded with microRNA-149-5p, a therapeutic miRNA downregulated in osteoarthritis, and evaluated focusing on their loading efficiency, release behaviour, cytotoxicity and gene transfection efficiency in vitro. Results showed all nanoparticle formulations were non-toxic and promising gene delivery agents, due to increased levels of microRNA-149-5p and decreased mRNA levels of microRNA's target, FUT-1. Highest gene transfection efficiency was obtained with the nanoparticle formulation which had the highest chondroitin sulfate load and smallest size. In addition, owing to their high chondroitin sulfate cargo, all nanoparticles were reported to enhance chondrogenesis, which was demonstrated by gene expression analysis and sulfated glycosaminoglycan (sGAG) staining. The obtained data suggest that the delivery of microRNA-149-5p via polysaccharide based carriers could achieve collaborative impact in cartilage regeneration and have a potential to enhance osteoarthritis treatment.