Synthesizing Functional Biomacromolecular Wet Adhesives with Typical Gel–Sol Transition and Shear-Thinning Features

Recent Advances in Multifunctional Naturally Derived Bioadhesives for Tissue Engineering and Wound Management

Recent advancements in naturally derived bioadhesives have transformed their application across diverse medical fields, including tissue engineering, wound management, and surgery. This review focuses on the innovative development and multifunctional nature of these bioadhesives, particularly emphasizing their role in enhancing adhesion performance in wet environments and optimizing mechanical properties for use in dynamic tissues. Key areas covered include the chemical and physical mechanisms of adhesion, the incorporation of multi‐adhesion strategies that combine covalent and non‐covalent bonding, and bioinspired designs mimicking natural adhesives such as those of barnacles and mussels. Additionally, the review discusses emerging applications of bioadhesives in the regeneration of musculoskeletal, cardiac, neural, and ocular tissues, highlighting the potential for bioadhesive‐based therapies in complex biological settings. Despite substantial progress, challenges such as scaling lab‐based innovations for clinical use and overcoming environmental and mechanical constraints remain critical. Ongoing research in bioadhesive technologies aims to bridge these gaps, promising significant improvements in medical adhesives tailored for diverse therapeutic needs.

Sodium Phytate-Incorporated Gelatin-Silicate Nanoplatelet Composites for Enhanced Cohesion and Hemostatic Function of Shear-Thinning Biomaterials

Shear-thinning biomaterials (STBs) based on gelatin-silicate nanoplatelets (SNs) are emerging as an alternative to conventional coiling and clipping techniques in the treatment of vascular anomalies. Improvements in the cohesion of STB hydrogels pave the way toward their translational application in minimally invasive therapies such as endovascular embolization repair. In the present study, sodium phytate (Phyt) additives are used to tune the electrostatic network of SNs-gelatin STBs, thereby promoting their mechanical integrity and facilitating injectability through standard catheters. We show that an optimized amount of Phyt enhances storage modulus by approximately one order of magnitude and reduces injection force by ≈58% without compromising biocompatibility and hydrogel wet stability. The Phyt additives are found to decrease the immune responses induced by SNs. In vitro embolization experiments suggest a significantly lower rate of failure in Phyt-incorporated STBs than in control groups. Furthermore, the addition of Phyt leads to accelerated blood coagulation (reduces clotting time by ≈45% compared to controls) due to the contributions of negatively charged phosphate groups, which aid in the prolonged durability of STB in coagulopathic patients. Therefore, the proposed approach is an effective method for the design of robust and injectable STBs for minimally invasive treatment of vascular malformations.

Biocompatible Hemostatic Sponge Exhibiting Broad-Spectrum Antibacterial Activity

Hemorrhage during accidents or surgery is a significant challenge that can contribute to mortality. This is further aggravated due to bacterial infections at the injured site. Therefore, rapid application of a hemostatic and antibacterial material is highly necessary as a pretreatment for patients' survival. Herein, we have developed a hemostatic sponge (Hemobac) through amide crosslinking of gelatin and an N-(2-hydroxy) propyl-3-trimethylammonium chitosan (HTCC)-silver chloride nanocomposite (QAm₁-Ag_0.1) to mitigate bacterial infections, while aiding hemostasis. This Hemobac sponge completely eradicated (∼4-5 log) a wide range of Gram-positive and Gram-negative bacteria encompassing various clinical isolates within 6 h. The antihemorrhagic ability of Hemobac was ascertained through SEM images, which exhibited the presence of agglomerated blood cells onto the sponge with a significantly low blood-clotting index value (∼23 ± 1). Notably, Hemobac reduced the blood loss by ∼70-80% in the liver puncture model and femoral vein injury model in mice, displaying its improved hemostatic ability over a marketed gelatin-based sponge. Negligible hemolytic activity (∼6%) and retained healthy morphology of mammalian cells were observed upon exposure to the Hemobac sponge. Minimal immune response was noticed at the Hemobac-treated wound in mice through histopathology analysis. Collectively, these findings indicate that this biocompatible Hemobac sponge can stop the bleeding instantaneously and combat bacterial infections.

Preparation and characterization of wet adhesives based on (poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate)/castor oil/styrene butadiene rubber) using gamma irradiation for trapping of reptiles and rodents

Wet adhesives from poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate), castor oil, and styrene butadiene rubber were prepared at variable compositions. These components were exposed to a certain range of irradiation dose for γ-rays. Wet adhesives were characterized by adhesion force, Fourier transform infrared, thermogravimetric analysis and derivative thermal gravimetric, gel permeation chromatography, proton nuclear magnetic resonance spectroscopy and scan electron microscopy. Results declared that dose and composition have significant effect on features of wet adhesives. Further, the adhesion force and thermal stability of wet adhesives improved by increasing the irradiation dose. Moreover, the adhesion force reached ~ 690 (kPa). The analysis of gel permeation chromatography showed that molecular weight of wet adhesive 48,921 (g/mol). The wet adhesives were exploited to trap reptiles and rodents. Through the results, it can be observed that the wet adhesives had good efficiency for trapping the reptiles and rodents. The results showed that the best sample of wet adhesive was from 98% of [poly (vinyl butyral-co-vinyl alcohol-co-vinyl (10%)/castor oil (90%))] to [2% of styrene butadiene rubber] at 30 kGy In conclusion, this study referred that this type of wet adhesive has an excellent ability to adhere and trap of reptiles and rodents such as geckos and mice respectively. Consequently, these wet adhesives could be utilized in pilot scale.

Microfluidics-assisted optimization of highly adhesive haemostatic hydrogel coating for arterial puncture

Although common in clinical practice, bleeding after tissue puncture may cause serious outcomes, especially in arterial puncture. Herein, gelatin-tannic acid composite hydrogels with varying compositions are prepared, and their adhesive properties are further optimized in microfluidic channel-based simulated vessels for haemostasis in arterial puncture. It is revealed that the composite hydrogels on the syringe needles used for arterial puncture should possess underwater adhesion higher than 4.9 kPa and mechanical strength higher than 86.0 kPa. The needles coated with the gelatin-tannic acid composite hydrogel completely prevent blood loss after both vein and arterial puncture in different animal models. This study holds great significance for the preparation of haemostatic needles for vessel puncture, and gelatin-tannic acid hydrogel coated needles may help to prevent complications associated with arterial puncture.

•

Haemostatic needles were prepared with coating of gelatin-tannic acid hydrogel.

•

Microfluidic system was employed to optimize the underwater adhesion of gelatin-tannic acid hydrogel coating.

•

Needles coated with the gelatin-tannic acid hydrogel exhibited complete haemostasis after arterial puncture.

Cancer theranostic platforms based on injectable polymer hydrogels

Theranostic platforms that combine therapy with diagnosis not only prevent the undesirable biological responses that may occur when these processes are conducted separately, but also allow individualized therapies for patients. Polymer hydrogels have been employed to provide well-controlled drug release and targeted therapy in theranostics, where injectable hydrogels enable non-invasive treatment and monitoring with a single injection, offering greater patient comfort and efficient therapy. Efforts have been focused on applying injectable polymer hydrogels in theranostic research and clinical use. This review highlights recent progress in the design of injectable polymer hydrogels for cancer theranostics, particularly focusing on the elements/components of theranostic hydrogels, and their cross-linking strategies, structures, and performance with regard to drug delivery/tracking. Therapeutic agents and tracking modalities that are essential components of the theranostic platforms are introduced, and the design strategies, properties and applications of the injectable hydrogels developed via two approaches, namely chemical bonds and physical interactions, are described. The theranostic functions of the platforms are highly dependent on the architecture and components employed for the construction of hydrogels. Challenges currently presented by theranostic platforms based on injectable hydrogels are identified, and prospects of acquiring more comfortable and personalized therapies are proposed.

Hemostatic Needles: Controlling Hemostasis Time by a Catecholamine Oxidative Pathway

Most infectious human viruses are generally found in the bloodstream after being released by infected organs. Thus, hemorrhage in patients, whose blood contains infectious viruses might be a significant risk for secondary infections. In this work, a self-sealing hemostatic needle that causes no bleeding even after its removal is reported. The materials used for the self-sealing needles are inspired by mussel adhesive polysaccharide, chitosan-catechol, which shows a rapid phase transition from a solid phase (i.e., a thin film) to an adhesive gel upon coming into contact with blood. We found that the self-sealing time for the complete hemostasis depends on the oxidation pathway of the conjugated catechol. For high-temperature oxidation (i.e., 60 °C), Michael addition is a dominant oxidative coupling reaction, which weakens the chitosan-catechol attachment force on the needle surface. Thus, the film is easily transferred to the hemorrhaging sites, with the result that there is no bleeding even after a short injection time (<5 s). In contrast, during low-temperature oxidation (4 °C), Schiff base formation is dominant, which strengthens the film attachment force on the needle surface, resulting in continued bleeding owing to a dearth of tissue transfer after the injection.

A Fe3+-crosslinked pyrogallol-tethered gelatin adhesive hydrogel with antibacterial activity for wound healing

A tunicate-inspired gelatin-based hydrogel prepared by a simple mixing method, exhibits strong adhesion and antibacterial capacity, and facilitates wound healing.