Bioinspired Polymerization of Quercetin to Produce a Curcumin-Loaded Nanomedicine with Potent Cytotoxicity and Cancer-Targeting Potential in Vivo

Characterization of multifunctional β-cyclodextrin-coated Bi2O3 nanoparticles conjugated with curcumin for CT imaging-guided synergetic chemo-radiotherapy in breast cancer

Nanotechnology-based diagnostic, and therapeutic approaches revolutionized the field of cancer detection, and treatment, offering tremendous potential for cost-effective interventions in the early stages of disease. This research synthesized bismuth oxide (Bi2O3) nanoparticles (NPs) that were modified with polycyclodextrin (PCD), and functionalized with glucose (Glu) to load curcumin (CUR) for CT imaging and chemo-radiotherapy applications in Breast Cancer. The prepared Bi2O3@PCD-CUR-Glu NPs underwent comprehensive characterization, encompassing various aspects, including cell migration, cytotoxicity, cellular uptake, blood compatibility, reactive oxygen species (ROS) generation ability, real-time PCR analysis, in-vivo safety assessment, in-vivo anti-tumor efficacy, as well as in-vitro CT contrast and X-ray RT enhancement evaluation. CT scan was conducted before and after (1 and 3 h) intravenous injection of Bi2O3@PCD-CUR-Glu NPs. Through the use of coupled plasma optical emission spectrometry (ICP-OES) analysis, the final prepared nanoparticle distribution in the Bab/c mice was assessed. The spherical NPs that were ultimately synthesized and had a diameter of around 80 nm demonstrated exceptional toxicity towards the SKBr-3 breast cancer cell line. The cell viability was at its lowest level after 48 h of exposure to a radiation dose of 2 Gy at a concentration of 100 µg/mL. The combined treatment involving using Bi2O3@PCD-CUR-Glu NPs along with X-ray radiation showed a substantial increase in the generation of ROS, specifically a remarkable 420 % growth. Gene expression analysis indicated that the expression levels of P53, and BAX pro-apoptotic genes were significantly increased. The in-vitro CT imaging analysis conducted unequivocally demonstrated the notable superiority of NPs over Omnipaque in terms of X-ray absorption capacity, a staggering 1.52-fold increase at 80 kVp. The resultsdemonstrated that the targeted Bi2O3@PCD-CUR-Glu NPs could enhance the visibility of a small mice tumor that is detectable by computed tomography and made visible through X-ray attenuation. Results suggested that Bi2O3@PCD-CUR-Glu NPs, integrated with CT imaging and chemo-radiotherapy, have great potential as a versatile theranostic system for clinical application.

Oxidative Coupling Assembly Induced Bio-engineered Quercetin Microspheres for the Gastrosparing Delivery of Diclofenac Sodium

OBJECTIVE

The study aimed to develop microspheres of quercetin by oxidative coupling assembly and these microspheres were used to deliver diclofenac sodium without causing gastrotoxicity.

METHODS

The oxidative coupling assembly of quercetin was carried out in the presence of copper sulfate to yield quercetin microspheres. The microsphere of quercetin was loaded with diclofenac sodium (QP-Diclo). The carrageenan induced paw edema in rats was used for anti-inflammatory action was studied by using and acetic acid-induced writhing in mice was used to study the analgesic potential of the QP loaded microspheres. The ulcerogenecity and gastrotoxicity comparison was made between diclofenac and QP-Diclo.

RESULTS

The oxidative coupling assembly of quercetin resulted in microspheres of 10-20 μm in size, which were loaded with diclofenac sodium (QP-Diclo). The marked anti-inflammatory activity was observed by QP-Diclo treatment using carrageenan induced paw edema (in rats) and better analgesic activity than diclofenac sodium in mice. The administration of QP-Diclo significantly elevated the diminished overall nitrite/nitrate extent and thiobarbituric acid reactive and significantly increased the diminished superoxide dismutase activity in comparison to diclofenac sodium in gastric mucosa.

CONCLUSION

The results suggested that dietary polyphenol quercetin can be converted to microspheres by oxidative coupling assembly and can be used to deliver diclofenac sodium without causing gastrotoxicity.

Identifying synergistic combinations of Doxorubicin-Loaded polyquercetin nanoparticles and natural Products: Implications for breast cancer therapy

Combining chemotherapeutic agents with bioactive natural products is an attractive cancer treatment modality to reduce the dose and side effects of chemotherapy. Combination treatments with drugs having different mechanisms of action can also be beneficial in combatting the development of drug resistance by cancer cells. Nanoparticle (NP)-mediated drug delivery can further improve the therapeutic index of cytotoxic agents by enabling passive and/or active targeting to tumor tissues in vivo. Using doxorubicin (DOX) as a model chemotherapeutic agent, we developed three NP formulations based on polyquercetin (pQCT), an emerging nanocarrier platform. The NPs were co-assembled with DOX, pQCT, and either Pluronic P123, methoxy poly(ethylene glycol)-amine, or D-α-tocopheryl poly(ethylene glycol) 1000 succinate (TPGS). Physicochemical characterization of the NPs revealed them to have a spherical morphology with high monodispersity, excellent drug loading capacity, and sustained drug release. Then, the NPs were evaluated in vitro to determine their potential synergism when combined with the bioactive natural products curcumin (CUR), tannic acid (TA), and thymoquinone (TQ) against breast cancer cells (MCF-7 and MDA-MB-231). Surprisingly, most of the combinations were found to be antagonistic. However, combinations containing CUR exhibited greater pro-apoptotic effects compared to the single agents, with polymer-modified pQCT NPs presenting as a promising nanoplatform for enhancing DOX's ability to promote cancer cell apoptosis. Our findings provide insights into the potential application of pQCT in nanomedicine, as well as the use of bioactive natural products in combination with DOX as a free agent and as an NP formulation in the treatment of breast cancer.

Colon-targeted delivery of polyphenols: construction principles, targeting mechanisms and evaluation methods

Polyphenols have received considerable attention for their promotive effects on colonic health. However, polyphenols are mostly sensitive to harsh gastrointestinal environments, thus, must be protected. It is necessary to design and develop a colon-targeted delivery system to improve the stability, colon-targeting and bioavailability of polyphenols. This paper mainly introduces research on colon-targeted controlled release of polyphenols. The physiological features affecting the dissolution, release and absorption of polyphenol-loaded delivery systems in the colon are first discussed. Simultaneously, the types of colon-targeted carriers with different release mechanisms are described, and colon-targeting assessment models that have been studied so far and their advantages and limitations are summarized. Based on the current research on polyphenols colon-targeting, outlook and reflections are proposed, with the goal of inspiring strategic development of new colon-targeted therapeutics to ensure that the polyphenols reach the colon with complete bioactivity.

Recent Progress in Nanotechnology Improving the Therapeutic Potential of Polyphenols for Cancer

Polyphenols derived from fruits, vegetables, and plants are bioactive compounds potentially beneficial to human health. Notably, compounds such as quercetin, curcumin, epigallocatechin-3-gallate (EGCG), and resveratrol have been highlighted as antiproliferative agents for cancer. Due to their low solubility and limited bioavailability, some alternative nanotechnologies have been applied to encapsulate these compounds, aiming to improve their efficacy against cancer. In this comprehensive review, we evaluate the main nanotechnology approaches to improve the therapeutic potential of polyphenols against cancer using in vitro studies and in vivo preclinical models, highlighting recent advancements in the field. It was found that polymeric nanomaterials, lipid-based nanomaterials, inorganic nanomaterials, and carbon-based nanomaterials are the most used classes of nanocarriers for encapsulating polyphenols. These delivery systems exhibit enhanced antitumor activity and pro-apoptotic effects, particularly against breast, lung, prostate, cervical, and colorectal cancer cells, surpassing the performance of free bioactive compounds. Preclinical trials in xenograft animal models have revealed decreased tumor growth after treatment with polyphenol-loaded delivery systems. Moreover, the interaction of polyphenol co-delivery systems and polyphenol-drug delivery systems is a promising approach to increase anticancer activity and decrease chemotherapy side effects. These innovative approaches hold significant implications for the advancement of clinical cancer research.

Nanoassemblies from the aqueous extract of roasted coffee beans modulate the behavioral and molecular effects of smoking withdrawal-induced anxiety in female rats

Antioxidant-rich plant extracts have demonstrated tremendous value as inflammatory modulators and as nanomaterial precursors. Chronic cigarette smoking alters neurotransmitter systems, particularly the glutamatergic system, and produces neuroinflammation. This study aimed to investigate the behavioral and molecular correlates of cigarette smoking withdrawal-induced anxiety-like behavior in rats, and whether these effects could be mitigated by the administration of antioxidant nanoassemblies prepared by spontaneous oxidation of dark-roasted Arabica coffee bean aqueous extracts. Four experimental groups of female Sprague-Dawley rats were randomly assigned to: (i) a control group that was only exposed to room air, (ii) a COF group that was administered 20 mg/kg of the coffee nanoassemblies by oral gavage, (iii) a SMOK group that was exposed to cigarette smoke and was given an oral gavage of distilled water, (iv) and a SMOK + COF group that was exposed to cigarette smoke and administered 20 mg/kg of the coffee nanoassemblies. Animals were exposed to cigarette smoke for 2 h per day, five days per week, with a 2-day withdrawal period each week. At the end of the 4th week, rats began receiving either distilled water or the coffee nanoassemblies before being exposed to cigarette smoke for 21 additional days. Weekly behavioral tests revealed that cigarette smoking withdrawal exacerbated anxiety, while the administration of the coffee nanoassemblies reduced this effect. The effect of cigarette smoking on astroglial glutamate transporters and nuclear factor kappa B (NF-κB) expression in brain subregions was also measured. Smoking reduced the relative mRNA and protein levels of the glutamate transporter 1 (GLT-1) and the cystine/glutamate antiporter (xCT), and increased the levels of NF-κB, but these effects were attenuated by the coffee nanoassemblies. Thus, administration of the antioxidant nanoassemblies decreased the negative effects of cigarette smoke, which included neuroinflammation, changes in glutamate transporters' expression, and a rise in anxiety-like behavior.

Flavonoids nanostructures promising therapeutic efficiencies in colorectal cancer

Colorectal cancer is among the frequently diagnosed cancers with high mortality rates around the world. Polyphenolic compounds such as flavonoids are secondary plant metabolites which exhibit anti-cancer activities along with anti-inflammatory effects. However, due to their hydrophobicity, sensitivity to degradation and low bioavailability, therapeutic effects have shown poor therapeutic effect. Nano delivery systems such as nanoliposomes, nanomicelles, silica nanoparticles have been investigated to overcome these difficulties. This review provides a summary of the efficiency of certain flavonoids and polyphenols (apigenin, genistein, resveratrol, quercetin, silymarin, catechins, luteolin, fisetin, gallic acid, rutin, and curcumin) on colorectal cancer models. It comprehensively discusses the influence of nano-formulation of flavonoids on their biological functions, including cellular uptake rate, bioavailability, solubility, and cytotoxicity, as well as their potential for reducing colorectal cancer tumor size under in vivo situations.

Pharmacological Activity of Quercetin: An Updated Review

Quercetin, a natural flavonoid compound with a widespread occurrence throughout the plant kingdom, exhibits a variety of pharmacological activities. Because of the wide spectrum of health-promoting effects, quercetin has attracted much attention of dietitians and medicinal chemists. An updated review of the literature on quercetin was performed using PubMed, Embase, and Science Direct databases. This article presents an overview of recent developments in pharmacological activities of quercetin including anti-SARS-CoV-2, antioxidant, anticancer, antiaging, antiviral, and anti-inflammatory activities as well as the mechanism of actions involved. The biological activities of quercetin were evaluated both in vitro and in vivo, involving a number of cell lines and animal models, but metabolic mechanisms of quercetin in the human body are not clear. Therefore, further large sample clinical studies are needed to determine the appropriate dosage and form of quercetin for the treatment of the disease.

Amphotericin B-Loaded Plant-Inspired Polyphenol Nanoparticles Enhance Its Antifungal Activity and Biocompatibility

Amphotericin B (AmB) is one of the first-line treatments for systemic fungal infections, yet it suffers from dose-limiting systemic toxicity and high cost of less toxic lipid-based formulations. Here, we report on a facile approach to synthesize an AmB-loaded nanomedicine by leveraging plant-inspired oxidative self-polymerization of the ubiquitous polyphenol quercetin (QCT). Polymerized QCT nanoparticles (pQCT NPs) were formed, loaded with AmB, and functionalized with poly(ethylene glycol) (PEG) to impart steric stability in a simple procedure that relied on mixing followed by dialysis. The AmB-loaded NPs (AmB@pQCT-PEG NPs) were characterized by a drug loading efficiency of more than 90%, a particle size of around 160 nm, a polydispersity index of 0.07, and a partially negative surface charge. AmB release from the NPs was sustained over several days and followed the Korsmeyer-Peppas model with a release exponent (n) value >0.85, denoting drug release by polymer relaxation and swelling. A hemolysis assay revealed the NPs to be highly biocompatible, with negligible hemolytic activity and 30-60% hemolysis after 1 and 24 h of incubation with erythrocytes, respectively, across a wide concentration range (6.25-100.00 μg/mL). Conversely, equivalent concentrations of free AmB caused 90-100% hemolysis within the same timeframe. Importantly, AmB@pQCT-PEG NPs outperformed free AmB in microbial susceptibility assays on Candida albicans, achieving a minimum inhibitory concentration of 62.5 ng/mL after 48 h of incubation, which was 2-fold lower than the free drug. Our results demonstrate that pQCT NPs may serve as a viable AmB delivery platform for the treatment of fungal infections and potentially other AmB-susceptible pathogens.

Engineering metal‐phenolic networks for enhancing cancer therapy by tumor microenvironment modulation

The complicated tumor microenvironment (TME) is featured by low pH values, high redox status, and hypoxia, which greatly supports the genesis, development, and metastasis of tumors, leading to drug resistance and clinical failure. Moreover, a lot of immunosuppressive cells infiltrate in such TME, resulting in depressing immunotherapy. Therefore, the development of TME-responsive nanoplatforms has shown great significance in enhancing cancer therapeutics. Metal-phenolic networks (MPNs)-based nanosystems, which self-assemble via coordination of phenolic materials and metal ions, have emerged as excellent TME theranostic nanoplatforms. MPNs have unique properties including fast preparation, tunable morphologies, pH response, and biocompatibility. Besides, functionalization and surface modification can endow MPNs with specific functions for application requirements. Here, the representative engineering strategies of various polyphenols are first introduced, followed by the introduction of the engineering mechanisms of polyphenolic nanosystems, fabrication, and distinct properties of MPNs. Then, their advances in TME modulation are highlighted, such as antiangiogenesis, hypoxia relief, combination therapy sensitization, and immunosuppressive TME reversion. Finally, we will discuss the challenges and future perspectives of MPNs-based nanosystems for enhancing cancer therapy. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Investigation of the Genotoxicological Profile of Aqueous Betula pendula Extracts

Betula pendula belongs to the Betulaceae family and is most common in the northern hemisphere. Various birch species have exhibited antimicrobial, antioxidant and anticancer properties. In the present study, we investigated the genotoxic and cytotoxic activity as well as the antigenotoxic potential against the mutagenic agent mitomycin-C (MMC) of two commercial products, i.e., a Betula pendula aqueous leaf extract product (BE) and a Betula pendula product containing aqueous extract of birch leaves at a percentage of 94% and lemon juice at a percentage of 6% (BP) using the cytokinesis block micronucleus (CBMN) assay. The most prevalent compounds and elements of BE and BP were identified using UHPLC-MS and ICP-MS/MS, respectively. All mixtures of BE with MMC demonstrated a decrease in the MN frequencies, with the lowest and highest concentrations inducing a statistically significant antigenotoxic activity. BP lacked genotoxic potential, while it was cytotoxic in all concentrations. Its mixtures with MMC demonstrated statistically significant antigenotoxic activity only at the lowest concentration. UHPLC-MS and ICP-MS/MS showed the presence of various elements and phytochemicals. Our results reveal antigenotoxic and cytotoxic potential of both BE and BP, while the variations observed could indicate the importance of the interactions among different natural products and/or their compounds.

Natural polyphenol self-assembled pH-responsive nanoparticles loaded into reversible hydrogel to inhibit oral bacterial activity

Periodontitis is one of the most prevalent chronic inflammatory diseases and Polyphenols isolated from Turkish gall play a major role in the treatment of inflammatory diseases for their antibacterial, anti-inflammatory and antioxidant activities. In this work, Turkish Galls effective constituent (TGEC, T) was prepared into nanoparticles (T-NPs) by principle of oxidative self-polymerization. The pH-sensitive T-NPs was encapsulated into thermosensitive type in-situ hydrogel, and 42.29 ± 1.12% of effective constituent from T-NPs were continuously released within 96 h under the periodontitis environment. In addition, the weakly alkaline oral micro-environment of patients with periodontitis is more conducive to the sustained release of effective constituent, which is 10.83% more than that of healthy periodontal environment. The bacteriostatic test showed that T-NPs had stronger antibacterial activity on oral pathogens than that of TGEC. Compared with TGEC, the minimum inhibitory concentration (MIC) of T-NPs against P. gingivalis and A. viscosus was reduced by 50% and 25%, respectively. Interestingly, T-NPs induced bacteria lysis by promoting the excessive production of ROS without periodontal tissue damage caused by excessive oxidation reaction. In conclusion, a simple method of preparing microspheres with natural polyphenols was developed, which provides beneficial reference for one-step prepared drug carriers from effective components of natural product, likewise the method offers a green and effective solution to synthesis a new adjuvant therapy drugs for treatment of gingivitis associated with periodontal pockets.

Site-Selective Coordination Assembly of Dynamic Metal-Phenolic Networks

Coordination states of metal‐organic materials are known to dictate their physicochemical properties and applications in various fields. However, understanding and controlling coordination sites in metal‐organic systems is challenging. Herein, we report the synthesis of site‐selective coordinated metal‐phenolic networks (MPNs) using flavonoids as coordination modulators. The site‐selective coordination was systematically investigated experimentally and computationally using ligands with one, two, and multiple different coordination sites. Tuning the multimodal Fe coordination with catechol, carbonyl, and hydroxyl groups within the MPNs enabled the facile engineering of diverse physicochemical properties including size, selective permeability (20–2000 kDa), and pH‐dependent degradability. This study expands our understanding of metal‐phenolic chemistry and provides new routes for the rational design of structurally tailorable coordination‐based materials.

The potential biological effects of quercetin based on pharmacokinetics and multi-targeted mechanism in vivo

Quercetin is a plant-derived polyphenol flavonoid that has been proven to be effective for many diseases. However, the mechanism and in vivo metabolism of quercetin remains to be clarified. It achieves a wide range of biological effects through various metabolites, gut microbiota and its metabolites, systemic mediators produced by inflammation and oxidation, as well as by multiple mechanisms. The all-round disease treatment of quercetin is achieved through the organic combination of multiple channels. Therefore, this article clarifies the metabolic process of quercetin in the body, and explores the new pattern of action of quercetin in the treatment of diseases.

Loading of Coal Tar in Polymeric Nanoparticles as a Potential Therapeutic Modality for Psoriasis

Coal tar (CT) is a commonly used therapeutic agent in psoriasis treatment. CT formulations currently in clinical use have limitations such as toxicity and skin staining properties, leading to patient nonadherence. The purpose of this study was to develop a nanoparticle (NP) formulation for CT based on biocompatible poly(lactide-co-glycolide) (PLGA). CT was entrapped in PLGA NPs by nanoprecipitation, and the resulting NPs were characterized using dynamic light scattering and high-performance liquid chromatography (HPLC) to determine the particle size and CT loading efficiency, respectively. In vitro biocompatibility of the NPs was examined in human dermal fibroblasts. Permeation, washability, and staining experiments were carried out using skin-mimetic Strat-M membranes in Franz diffusion cells. The optimal CT-loaded PLGA NPs achieved 92% loading efficiency and were 133 nm in size with a polydispersity index (PDI) of 0.10 and a zeta potential of -40 mV, promoting colloidal stability during storage. CT NPs significantly reduced the cytotoxicity of crude CT in human dermal fibroblasts, maintaining more than 75% cell viability at the highest concentration tested, whereas an equivalent concentration of CT was associated with 28% viability. Permeation studies showed that only a negligible amount of CT NPs could cross the Strat-M membrane after 24 h, with 97% of the applied dose found accumulated within the membrane. The superiority of CT NPs was further demonstrated by the notably diminished staining ability and enhanced washability compared to those of crude CT. Our findings present a promising CT nanoformulation that can overcome its limitations in the treatment of psoriasis and other skin disorders.

Curcumin-tannic acid-poloxamer nanoassemblies enhance curcumin's uptake and bioactivity against cancer cells in vitro

Curcumin (CUR) is a bioactive natural compound with potent antioxidant and anticancer properties. However, its poor water solubility has been a major limitation against its widespread clinical use. The aim of this study was to develop a nanoscale formulation for CUR to improve its solubility and potentially enhance its bioactivity, by leveraging the self-assembly behavior of tannic acid (TA) and amphiphilic poloxamers to form CUR-entrapped nanoassemblies. To optimize drug loading, formulation variables included the CUR: TA ratio and the type of amphiphilic polymer (Pluronic® F-127 or Pluronic® P-123). The optimal CUR nanoparticles (NPs) were around 200 nm in size with a high degree of monodispersity and 56% entrapment efficiency. Infrared spectroscopy confirmed the presence of intermolecular interactions between CUR and the NP formulation components. X-ray diffraction revealed that CUR was entrapped in the NPs in an amorphous state. The NPs maintained excellent colloidal stability under various conditions. In vitro release of CUR from the NPs showed a biphasic controlled release pattern up to 72 h. Antioxidant and antiproliferative assays against a panel of human cancer cell lines revealed significantly higher activity for CUR NPs compared to free CUR, particularly in MCF-7 and MDA-MB-231 breast cancer cells. This was attributed to greater cellular uptake of the NPs compared to the free drug as verified by confocal microscopy imaging and flow cytometry measurements. Our findings present a highly promising NP delivery platform for CUR prepared via a simple self-assembly process with the ability to potentiate its bioactivity in cancer and other diseases where oxidative stress is implicated.

Evaluation and Characterization of Curcumin-β-Cyclodextrin and Cyclodextrin-Based Nanosponge Inclusion Complexation

Cyclodextrin polymers and cyclodextrin-based nanosponges have been widely investigated for increasing drug bioavailability. This study examined curcumin's complexation stability and solubilization with β-cyclodextrin and β-cyclodextrin-based nanosponge. Nanosponges were prepared through the cross-linking of β-cyclodextrin with different molar ratios of diphenyl carbonate. Phase solubility experiments were conducted to evaluate the formed complexes and evaluate the potential of using β-cyclodextrin and nanosponge in pharmaceutical formulations. Furthermore, physicochemical characterizations of the prepared complexes included PXRD, FTIR, NMR, and DSC. In addition, in vitro release studies were performed for the prepared formulations. The formation of β-cyclodextrin complexes enhanced curcumin solubility up to 2.34-fold compared to the inherent solubility, compared to a 2.95-fold increment in curcumin solubility when loaded in β-cyclodextrin-based nanosponges. Interestingly, the stability constant for curcumin nanosponges was (4972.90 M^-1), which was ten times higher than that for the β-cyclodextrin complex, where the value was 487.34 M^-1. The study results indicated a decrease in the complexation efficiency and solubilization effect with the increased cross-linker amount. This study's findings showed the potential of using cyclodextrin-based nanosponge and the importance of studying the effect of cross-linking density for the preparation of β-cyclodextrin-based nanosponges to be used for pharmaceutical formulations.

Anisotropic and Amphiphilic Mesoporous Core-Shell Silica Microparticles Provide Chemically Selective Environments for Simultaneous Delivery of Curcumin and Quercetin

Porous silica materials are often used for drug delivery. However, systems for simultaneous delivery of multiple drugs are scarce. Here we show that anisotropic and amphiphilic dumbbell core-shell silica microparticles with chemically selective environments can entrap and release two drugs simultaneously. The dumbbells consist of a large dense lobe and a smaller hollow hemisphere. Electron microscopy images show that the shells of both parts have mesoporous channels. In a simple etching process, the properly adjusted stirring speed and the application of ammonium fluoride as etching agent determine the shape and the surface anisotropy of the particles. The surface of the dense lobe and the small hemisphere differ in their zeta potentials consistent with differences in dye and drug entrapment. Confocal Raman microscopy and spectroscopy show that the two polyphenols curcumin (Cur) and quercetin (QT) accumulate in different compartments of the particles. The overall drug entrapment efficiency of Cur plus QT is high for the amphiphilic particles but differs widely between Cur and QT compared to controls of core-shell silica microspheres and uniformly charged dumbbell microparticles. Furthermore, Cur and QT loaded microparticles show different cancer cell inhibitory activities. The highest activity is detected for the dual drug loaded amphiphilic microparticles in comparison to the controls. In the long term, amphiphilic particles may open up new strategies for drug delivery.

Recent Advances in Antioxidant Polymers: From Sustainable and Natural Monomers to Synthesis and Applications

Advances in technology have led to the production of sustainable antioxidants and natural monomers for food packaging and targeted drug delivery applications. Of particular importance is the synthesis of lignin polymers, and graft polymers, dopamine, and polydopamine, inulin, quercetin, limonene, and vitamins, due to their free radical scavenging ability, chemical potency, ideal functional groups for polymerization, abundance in the natural environment, ease of production, and activation of biological mechanisms such as the inhibition of the cellular activation of various signaling pathways, including NF-κB and MAPK. The radical oxygen species are responsible for oxidative damage and increased susceptibility to cancer, cardiovascular, degenerative musculoskeletal, and neurodegenerative conditions and diabetes; such biological mechanisms are inhibited by both synthetic and naturally occurring antioxidants. The orientation of macromolecules in the presence of the plasticizing agent increases the suitability of quercetin in food packaging, while the commercial viability of terpenes in the replacement of existing non-renewable polymers is reinforced by the recyclability of the precursors (thyme, cannabis, and lemon, orange, mandarin) and marginal ecological effect and antioxidant properties. Emerging antioxidant nanoparticle polymers have a broad range of applications in tumor-targeted drug delivery, food fortification, biodegradation of synthetic polymers, and antimicrobial treatment and corrosion inhibition. The aim of the review is to present state-of-the-art polymers with intrinsic antioxidant properties, including synthesis scavenging activity, potential applications, and future directions. This review is distinct from other works given that it integrates different advances in antioxidant polymer synthesis and applications such as inulin, quercetin polymers, their conjugates, antioxidant-graft-polysaccharides, and polymerization vitamins and essential oils. One of the most comprehensive reviews of antioxidant polymers was published by Cirillo and Iemma in 2012. Since then, significant progress has been made in improving the synthesis, techniques, properties, and applications. The review builds upon existing research by presenting new findings that were excluded from previous reviews.

A novel alginate/gelatin sponge combined with curcumin-loaded electrospun fibers for postoperative rapid hemostasis and prevention of tumor recurrence

Surgical resection of the tumor remains the preferred treatment for most solid tumors at an early stage, but surgical treatment often leads to massive bleeding and residual tumor cells. Therefore, a novel alginate/gelatin sponge combined with curcumin-loaded electrospun fibers (CFAGS) for rapid hemostasis and prevention of tumor recurrence was prepared by using an electrospinning and interpenetrating polymer network (IPN) strategy. The present results show that alginate/gelatin sponge display excellent hemostatic properties and possess more advantages than commercial gelatin hemostasis sponge. More importantly, CFAGS could control the release of curcumin, inducing curcumin to accumulate at the surgical site of the tumor, thereby inhibiting local tumor recurrence in the subcutaneous postoperative recurrence model. In addition, the sponge was safe to implant in the body and did not cause toxicity to normal tissues and organs. This approach represents a new strategy to implant a dual functional sponge at the postoperative site as an adjuvant to the surgical treatment of cancer.

Coffee Bean Polyphenols Can Form Biocompatible Template-free Antioxidant Nanoparticles with Various Sizes and Distinct Colors

Plant polyphenols have attracted attention in recent years due to their ability to undergo oxidative coupling reactions enabled by the presence of multiple phenolic hydroxyl groups, forming chemically versatile coatings and biocompatible nanoparticles (NPs) for various applications. The aim of this study was to investigate whether coffee bean aqueous extracts, which are known to be rich in polyphenols, could serve as a natural source of NP building blocks. Extracts were prepared by heating ground Arabica beans of varying roasting degrees in water with or without the addition of sodium metaperiodate or copper sulfate as an oxidizing agent, followed by filtration. NP formation was verified by dynamic light scattering and transmission electron microscopy, which revealed the presence of nano-sized particles with varying sizes and polydispersities as a function of the coffee type and oxidizing agent used. NP colors ranged from light to medium to dark brown, and particle sizes were between 44 and 250 nm with relatively low polydispersity indices. In vitro antioxidant assays showed that oxidizing agent-treated coffee NPs had lower antioxidant potency compared to air-oxidized NPs, but the free-radical scavenging activity was still retained. Coffee NPs exhibited no antimicrobial activity against common bacterial and fungal strains. Cell viability assays demonstrated that the NPs were biocompatible in human dermal fibroblasts, while exhibiting antiproliferative activity against MCF7 breast cancer cells, particularly copper sulfate-oxidized NPs. This study presents a facile and economical method to produce template-free antioxidant NPs that may be explored for various applications such as drug delivery and cosmetics.

Application of quercetin flavonoid based hybrid nanocomposites: A review

Natural bioflavonoids are an essential component of dietary supplements possessing antimicrobial properties. Many of the bioflavonoids have resulted in positive antitumor, anticancer, antibacterial, antifungal, anti-inflammatory properties, but the efficacy remains low due to toxicity at the molecular level whereas antiviral property limits to negative. The synergistic link between nanoscience and flavonoid chemistry enhances the epidemiological properties of flavonoid and also diminish the antimicrobial resistivity (AMR) by forming their hybrid nanocomposites. Nanochemistry uses various nanocomposite and nanomaterials for biosensing the flavonoids and their delivery as a drug. The quercetin flavonoid and its derivatives such as rutin, and myricetin are used for sensing and drug delivery. Quercetin with 15Carbon-5Hydroxyl chemical scaffold has been explored for a few decades for the development of hybrid nanocomposite and nanomaterial with metallic as well as organic nano co-composites. This quercetin flavonoid based hybrid nanocomposites seemed to show a significant effect on In vitro and some animal model processes along with attenuating lipid peroxidation, platelet aggregation, and capillary permeability actions. This review mainly focused on the hybrid nanoscience of quercetin bioflavonoid and its application in numerous biological, material fields with a future perspective.

Model-free and model-based analysis of thermo-oxidative response of wolfberries: A new developed mechanistic scheme

Thermally accelerated oxidative degradation of wolfberry pulp was kinetically monitored using model-free and model-based approaches. Kinetic calculations were performed based on simultaneous thermal analysis measurements in an air at four different heating rates. From kinetic analysis, new developed mechanistic scheme which is responsible for wolfberries anti-oxidative behavior was proposed. It was found that thermo-oxidative process proceeds through multiplestep mechanism including sum of two independent reaction sets, via consecutive and competitive steps. It was established that rutoside degradation pathway to flavonol through hydrolysis reaction is rate-determining step of considered process. Furthermore, it was found that key flavonol compound degraded by competitive reactions mechanism forming such kinetic branches, which lead to compounds responsible for wolfberries antioxidant activity. It was established that flavonol oxidative cleavage reaction and oxidative polymerization are main chemical routes which are very important in a complex antioxidant mechanism for scavenging free radicals in wolfberries oxidative stress response.

Development of a Thymoquinone Polymeric Anticancer Nanomedicine through Optimization of Polymer Molecular Weight and Nanoparticle Architecture

Thymoquinone (TQ) is a water-insoluble natural compound isolated from Nigella sativa that has demonstrated promising chemotherapeutic activity. The purpose of this study was to develop a polymeric nanoscale formulation for TQ to circumvent its delivery challenges. TQ-encapsulated nanoparticles (NPs) were fabricated using methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-PCL) copolymers by the nanoprecipitation technique. Formulation variables included PCL chain length and NP architecture (matrix-type nanospheres or reservoir-type nanocapsules). The formulations were characterized in terms of their particle size, polydispersity index (PDI), drug loading efficiency, and drug release. An optimized TQ NP formulation in the form of oil-filled nanocapsules (F2-NC) was obtained with a mean hydrodynamic diameter of 117 nm, PDI of 0.16, about 60% loading efficiency, and sustained in vitro drug release. The formulation was then tested in cultured human cancer cell lines to verify its antiproliferative efficacy as a potential anticancer nanomedicine. A pilot pharmacokinetic study was also carried out in healthy mice to evaluate the oral bioavailability of the optimized formulation, which revealed a significant increase in the maximum plasma concentration (Cmax) and a 1.3-fold increase in bioavailability compared to free TQ. Our findings demonstrate that the versatility of polymeric NPs can be effectively applied to design a nanoscale delivery platform for TQ that can overcome its biopharmaceutical limitations.

Self-Assembled Organic Nanomaterials for Drug Delivery, Bioimaging, and Cancer Therapy

Over the past few decades, tremendous progress has been made in the development of engineering nanomaterials, which opened new horizons in the field of diagnosis and treatment of various diseases. In particular, self-assembled organic nanomaterials with intriguing features including delicate structure tailoring, facile processability, low cost, and excellent biocompatibility have shown outstanding potential in biomedical applications because of the enhanced permeability and retention (EPR) effect and multifunctional properties. In this review, we briefly introduce distinctive merits of self-assembled organic nanomaterials for biomedical applications. The main focus will be placed on summarizing recent advances in self-assembled organic nanomedicine for drug delivery, bioimaging, and cancer phototherapy, followed by highlighting a critical perspective on further development of self-assembled organic nanomaterials for future clinical translation. We believe that the above themes will appeal to researchers from different fields, including material, chemical, and biological sciences, as well as pharmaceutics.

Current Perspectives of the Applications of Polyphenols and Flavonoids in Cancer Therapy

The development of anticancer therapies that involve natural drugs has undergone exponential growth in recent years. Among the natural compounds that produce beneficial effects on human health, polyphenols have shown potential therapeutic applications in cancer due to their protective functions in plants, their use as food additives, and their excellent antioxidant properties. The possibility of combining conventional drugs-which are usually more aggressive than natural compounds-with polyphenols offers very valuable advantages such as the building of more efficient anticancer therapies with less side effects on human health. This review shows a wide range of trials in which polyphenolic compounds play a crucial role as anticancer medicines alone or in combination with other drugs at different stages of cancer: cancer initiation, promotion, and growth or progression. Moreover, the future directions in applications of various polyphenols in cancer therapy are emphasized.

Polyphenol-Mediated Assembly for Particle Engineering

Polyphenols are naturally occurring compounds that are ubiquitous in plants and display a spectrum of physical, chemical, and biological properties. For example, they are antioxidants, have therapeutic properties, absorb UV radiation, and complex with metal ions. Additionally, polyphenols display high adherence, which has been exploited for assembling nanostructured materials. We previously reviewed the assembly of different phenolic materials and their applications (Angew. Chem. Int. Ed. 2019, 58, 1904-1927); however, there is a need for a summary of the fundamental interactions that govern the assembly, stability, and function of polyphenol-based materials. A detailed understanding of interactions between polyphenols and various other building blocks will facilitate the rational design and assembly of advanced polyphenol particles for specific applications. This Account discusses how different interactions and bonding (i.e., hydrogen, π, hydrophobic, metal coordination, covalent, and electrostatic) can be leveraged to assemble and stabilize polyphenol-based particles for diverse applications. In polyphenol-mediated assembly strategies, the polyphenols typically exert more than one type of stabilizing attractive force. However, one interaction often dominates the assembly process and dictates the physicochemical behavior of the particles, which in turn influences potential applications. This Account is thus divided into sections that each focus on a key interaction with relevant examples of applications to highlight structure-function relationships. For example, metal coordination generally becomes weaker at lower pH, which makes it possible to engineer metal-phenolic materials with a pH-responsive disassembly profile suitable for drug delivery. Engineered particles, such as hollow capsules, mesoporous and core-shell particles, and self-assembled nanoparticles are some of the systems that are covered to highlight how polyphenols interact with other building blocks and therefore make up the major focus of this Account. Some of the applications of these materials exemplified in this Account include drug delivery, catalysis, environmental remediation, and forensics. Finally, a perspective is provided on the current challenges and trends in polyphenol-mediated particle assembly, and viable near-term strategies for further elucidating the interplay of various competing interactions in particle formation are discussed. This Account is also expected to serve as a reference to guide fundamental research and facilitate the rational design of polyphenol-based materials for diverse emerging applications.

Tuning the Surface Chemistry of Melanin-Mimetic Polydopamine Nanoparticles Drastically Enhances Their Accumulation into Excised Human Skin

Melanin-mimetic polydopamine nanoparticles (PDA NPs) are emerging as promising candidates for topical and transdermal drug delivery because they mimic melanin, a naturally occurring skin pigment. However, our knowledge of their interactions with human skin remains limited. Hence, we set out to investigate the role of PDA NP surface chemistry in modulating their skin deposition. PDA NPs were synthesized by base-catalyzed oxidative self-polymerization of dopamine and functionalized with poly(ethylene glycol) (PEG) bearing different termini to obtain neutral, anionic, cationic, and hydrophobic PEGylated NPs. NPs were characterized by dynamic light scattering, transmission electron microscopy, Fourier transform-infrared spectroscopy, and X-ray photoelectron spectroscopy. The NPs were then labeled with rhodamine B, and their skin interactions were investigated both in vitro, using a Strat-M membrane, and ex vivo, using excised whole thickness human skin. In vitro diffusion studies revealed that the NPs did not permeate transdermally, rather the NPs accumulated in the Strat-M membrane after 24 h of incubation. Membrane deposition of the NPs showed a strong dependence on surface chemistry, with anionic (unmodified and carboxyl-terminated PEGylated) NPs achieving the highest accumulation, followed by neutral and cationic NPs, whereas hydrophobic NPs achieved the lowest degree of accumulation. In ex vivo permeation studies, we observed that surface modification of PDA NPs with PEG serving as an antifouling coating is essential to maintaining colloidal stability upon skin contact. Moreover, anionic PEGylated NPs were able to achieve 78% skin accumulation, which was significantly higher than neutral and cationic NPs (51 and 34% accumulation, respectively). Our findings provide important insights into the role of surface chemistry in enhancing the skin accumulation of melanin-mimetic PDA NPs as potential sunscreens and carriers for skin-targeted treatments.