1
|
Li Q, Sun Y, Zhao H, Zhang F, Guo Y, Chen X, Zhao G. Structure and properties of the acellular porcine cornea irradiated with 60Co-γ and electron beam and its histocompatibility. J Biomed Mater Res A 2024; 112:825-840. [PMID: 38158889 DOI: 10.1002/jbm.a.37663] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2022] [Revised: 08/15/2023] [Accepted: 12/18/2023] [Indexed: 01/03/2024]
Abstract
Acellular porcine cornea (APC) has been used in corneal transplantation and treatment of the corneal diseases. Sterilization is a key step before the application of graft, and irradiation is one of the most commonly used methods. In this paper, APC was prepared by the physical freeze-thawing combined with biological enzymes, and the effects of the electron beam (E-beam) and cobalt 60 (60Co-γ) at the dose of 15 kGy on the physicochemical properties, structure, immunogenicity, and biocompatibility of the APC were investigated. After decellularization, the residual DNA was 20.86 ± 1.02 ng/mg, and the α-Gal clearance rate was more than 99%. Irradiation, especially the 60Co-γ, reduced the cornea's transmittance, elastic modulus, enzymatic hydrolysis rate, swelling ratio, and cross-linking degree. Meanwhile, the diameter and spacing of the collagen fibers increased. In the rat subcutaneous implantation, many inflammatory cells appeared in the unirradiated APC, while the irradiated had good histocompatibility, but the degradation was faster. The lamellar keratoplasty in rabbits indicated that compared to the E-beam, the 60Co-γ damaged the chemical bond of collagen to a larger extent, reduced the content of GAGs, and prolonged the complete epithelization of the grafts. The corneal edema was more serious within 1 month after the surgery. After 2 months, the thickness of the APC with the two irradiation methods tended to be stable, but that in the 60Co-γ group became thinner. The pathological results showed that the collagen structure was looser and the pores were larger, indicating the 60Co-γ had a more extensive effect on the APC than the E-beam at 15 kGy.
Collapse
Affiliation(s)
- Qing Li
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, China
| | - Yajun Sun
- Qingdao Chunghao Tissue Engineering Co., Ltd., Qingdao, Shandong, China
| | - Haibin Zhao
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, China
| | - Fan Zhang
- Qilu Hospital, Shandong University, Jinan, Shandong, China
| | - Yu Guo
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, China
| | - Xin Chen
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, China
| | - Guoqun Zhao
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong, China
| |
Collapse
|
2
|
Das S, Jegadeesan JT, Basu B. Gelatin Methacryloyl (GelMA)-Based Biomaterial Inks: Process Science for 3D/4D Printing and Current Status. Biomacromolecules 2024; 25:2156-2221. [PMID: 38507816 DOI: 10.1021/acs.biomac.3c01271] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/22/2024]
Abstract
Tissue engineering for injured tissue replacement and regeneration has been a subject of investigation over the last 30 years, and there has been considerable interest in using additive manufacturing to achieve these goals. Despite such efforts, many key questions remain unanswered, particularly in the area of biomaterial selection for these applications as well as quantitative understanding of the process science. The strategic utilization of biological macromolecules provides a versatile approach to meet diverse requirements in 3D printing, such as printability, buildability, and biocompatibility. These molecules play a pivotal role in both physical and chemical cross-linking processes throughout the biofabrication, contributing significantly to the overall success of the 3D printing process. Among the several bioprintable materials, gelatin methacryloyl (GelMA) has been widely utilized for diverse tissue engineering applications, with some degree of success. In this context, this review will discuss the key bioengineering approaches to identify the gelation and cross-linking strategies that are appropriate to control the rheology, printability, and buildability of biomaterial inks. This review will focus on the GelMA as the structural (scaffold) biomaterial for different tissues and as a potential carrier vehicle for the transport of living cells as well as their maintenance and viability in the physiological system. Recognizing the importance of printability toward shape fidelity and biophysical properties, a major focus in this review has been to discuss the qualitative and quantitative impact of the key factors, including microrheological, viscoelastic, gelation, shear thinning properties of biomaterial inks, and printing parameters, in particular, reference to 3D extrusion printing of GelMA-based biomaterial inks. Specifically, we emphasize the different possibilities to regulate mechanical, swelling, biodegradation, and cellular functionalities of GelMA-based bio(material) inks, by hybridization techniques, including different synthetic and natural biopolymers, inorganic nanofillers, and microcarriers. At the close, the potential possibility of the integration of experimental data sets and artificial intelligence/machine learning approaches is emphasized to predict the printability, shape fidelity, or biophysical properties of GelMA bio(material) inks for clinically relevant tissues.
Collapse
Affiliation(s)
- Soumitra Das
- Materials Research Centre, Indian Institute of Science, Bangalore, India 560012
| | | | - Bikramjit Basu
- Materials Research Centre, Indian Institute of Science, Bangalore, India 560012
| |
Collapse
|
3
|
Pal P, Sambhakar S, Paliwal S, Kumar S, Kalsi V. Biofabrication paradigms in corneal regeneration: bridging bioprinting techniques, natural bioinks, and stem cell therapeutics. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 2024; 35:717-755. [PMID: 38214998 DOI: 10.1080/09205063.2024.2301817] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2023] [Accepted: 12/29/2023] [Indexed: 01/14/2024]
Abstract
Corneal diseases are a major cause of vision loss worldwide. Traditional methods like corneal transplants from donors are effective but face challenges like limited donor availability and the risk of graft rejection. Therefore, new treatment methods are essential. This review examines the growing field of bioprinting and biofabrication in corneal tissue engineering. We begin by discussing various bioprinting methods such as stereolithography, inkjet, and extrusion printing, highlighting their strengths and weaknesses for eye-related uses. We also explore how biological tissues are made suitable for bioprinting through a process called decellularization, which can be achieved using chemical, physical, or biological methods. The review then looks at natural materials, known as bioinks, used in bioprinting. We focus on materials like gelatin, collagen, fibrin, chitin, chitosan, silk fibroin, and alginate, examining their mechanical and biological properties. The importance of hydrogel scaffolds, particularly those based on collagen and other materials, is also discussed in the context of repairing corneal tissue. Another key area we cover is the use of stem cells in corneal regeneration. We pay special attention to limbal epithelial stem cells and mesenchymal stromal cells, highlighting their roles in this process. The review concludes with an overview of the latest advancements in corneal tissue bioprinting, from early techniques to advanced methods of delivering stem cells using bioengineered materials. In summary, this review presents the current state and future potential of bioprinting and biofabrication in creating functional corneal tissues, highlighting new developments and ongoing challenges with a view towards restoring vision.
Collapse
Affiliation(s)
- Pankaj Pal
- Department of Pharmacy, Banasthali Vidyapith, Radha Kishnpura, Rajasthan, India
| | - Sharda Sambhakar
- Department of Pharmacy, Banasthali Vidyapith, Radha Kishnpura, Rajasthan, India
| | - Shailendra Paliwal
- Department of Pharmacy, L.L.R.M Medical College, Meerut, Uttar Pradesh, India
| | - Shobhit Kumar
- Department of Pharmaceutical Technology, Meerut Institute of Engineering and Technology, Meerut, Uttar Pradesh, India
| | - Vandna Kalsi
- School of Pharmaceutical Sciences, Lovely Professional University, Phagwara, Punjab, India
| |
Collapse
|
4
|
Yang Y, Yang GW, Lu JJ, Chen HR, Guo YQ, Yang N, Zhu YZ, Liu XQ, Su TT, Liu YY, Yu L, Li YS, Hu LF, Li JB. Fabrication of levofloxacin-loaded porcine acellular dermal matrix hydrogel and functional assessment in urinary tract infection. J Nanobiotechnology 2024; 22:52. [PMID: 38321555 PMCID: PMC10848372 DOI: 10.1186/s12951-024-02322-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/03/2023] [Accepted: 01/30/2024] [Indexed: 02/08/2024] Open
Abstract
Bacterial cystitis, a commonly occurring urinary tract infection (UTI), is renowned for its extensive prevalence and tendency to recur. Despite the extensive utilization of levofloxacin as a conventional therapeutic approach for bacterial cystitis, its effectiveness is impeded by adverse toxic effects, drug resistance concerns, and its influence on the gut microbiota. This study introduces Lev@PADM, a hydrogel with antibacterial properties that demonstrates efficacy in the treatment of bacterial cystitis. Lev@PADM is produced by combining levofloxacin with decellularized porcine acellular dermal matrix hydrogel and exhibits remarkable biocompatibility. Lev@PADM demonstrates excellent stability as a hydrogel at body temperature, enabling direct administration to the site of infection through intravesical injection. This localized delivery route circumvents the systemic circulation of levofloxacin, resulting in a swift and substantial elevation of the antimicrobial agent's concentration specifically at the site of infection. The in vivo experimental findings provide evidence that Lev@PADM effectively prolongs the duration of levofloxacin's action, impedes the retention and invasion of E.coli in the urinary tract, diminishes the infiltration of innate immune cells into infected tissues, and simultaneously preserves the composition of the intestinal microbiota. These results indicate that, in comparison to the exclusive administration of levofloxacin, Lev@PADM offers notable benefits in terms of preserving the integrity of the bladder epithelial barrier and suppressing the recurrence of urinary tract infections.
Collapse
Affiliation(s)
- Yi Yang
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Guang-Wei Yang
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Jian-Juan Lu
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Hao-Ran Chen
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Ya-Qin Guo
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Ning Yang
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Yun-Zhu Zhu
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Xiao-Qiang Liu
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Ting-Ting Su
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Yan-Yan Liu
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Liang Yu
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China
| | - Ya-Sheng Li
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China.
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China.
| | - Li-Fen Hu
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China.
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China.
| | - Jia-Bin Li
- Department of Infectious Diseases and Anhui Center for Surveillance of Bacterial Resistance, The First Affiliated Hospital of Anhui Medical University, Jixi Road 218, Hefei, Anhui, 230022, People's Republic of China.
- Anhui Province Key Laboratory of Infectious Diseases and, Institute of Bacterial Resistance, Anhui Medical University, Hefei, 230022, People's Republic of China.
| |
Collapse
|
5
|
Zhang F, Gao H, Jiang X, Yang F, Zhang J, Song S, Shen J. Biomedical Application of Decellularized Scaffolds. ACS APPLIED BIO MATERIALS 2023; 6:5145-5168. [PMID: 38032114 DOI: 10.1021/acsabm.3c00778] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2023]
Abstract
Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.
Collapse
Affiliation(s)
- Fang Zhang
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Huimin Gao
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Xuefeng Jiang
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Fang Yang
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Jun Zhang
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Saijie Song
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Jian Shen
- National and Local Joint Engineering Research Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
- Jiangsu Engineering Research Center of Interfacial Chemistry, Nanjing University, Nanjing 210023, China
| |
Collapse
|
6
|
Günal G, Gokcen D, Aydin HM. Extracellular Matrix-Based Conductive Composites for Myocardial Tissue Regeneration. ACS APPLIED BIO MATERIALS 2023; 6:4100-4104. [PMID: 37782232 DOI: 10.1021/acsabm.3c00557] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/03/2023]
Abstract
Myocardial tissue engineering strategies such as fabrication of cardiac patches for tissue regeneration offer various solutions for the loss of function developed due to myocardial infarction. Here, we combined the hybrid structure (previously obtained and combined decellularized myocardium grafts with poly(glycerol-sebacate) polymer) with multiwalled carbon nanotubes (MWCNTs) to provide the essential characteristics for cardiac tissue regeneration. MWCNTs were doped in the cross-linked structure, and the conductivity and Young's modulus of the composite elastomer were found as 5 × 10-3 ± 1 × 10-3 S/m and 374 ± 75.8 kPa, respectively. The cell-material interaction was evaluated, and composite structures supported cell adhesion and showed no cytotoxic effect.
Collapse
Affiliation(s)
- Gülçin Günal
- Bioengineering Division, Institute of Science, Hacettepe University, Beytepe, 06800 Ankara, Turkey
- Department of Plastic Surgery, Akdeniz University, Konyaaltı, 07058 Antalya, Turkey
| | - Dincer Gokcen
- Department of Electrical and Electronics Engineering, Faculty of Engineering, Hacettepe University, Beytepe, 06800 Ankara, Turkey
| | - Halil Murat Aydin
- Bioengineering Division, Institute of Science, Hacettepe University, Beytepe, 06800 Ankara, Turkey
- Centre for Bioengineering, Hacettepe University, Beytepe, 06800 Ankara, Turkey
| |
Collapse
|
7
|
Pramanik B, Islam MM, Patra HK. Rational design of peptide-based implants for corneal bioengineering. Curr Opin Biotechnol 2023; 81:102947. [PMID: 37163824 DOI: 10.1016/j.copbio.2023.102947] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2023] [Revised: 03/23/2023] [Accepted: 03/27/2023] [Indexed: 05/12/2023]
Abstract
Regeneration of damaged cornea can save vision for millions of patients. Most of these patients are waiting for transplantation of a donor cornea or suitable substitute to restore vision. Although donor cornea transplantation is the most clinically accepted treatment, shortage of donor cornea results in almost 69 out of every 70 patients untreated with the waiting list for transplantation drastically increasing every year according to a prepandemic estimation. Therefore, corneal replacements are coming up as a cutting-edge alternative strategy. In view of the peptides, especially collagen-like peptides and peptide amphiphiles with bioactive functional motifs demonstrate promising avenue for the corneal tissue engineering and promoting regeneration, by their hierarchical self-assembling propensity to acquire desired nano- to macroscale 3D architecture. Here, we analyze rational peptide designing, self-assembly, and strategies of peptide/peptide-based nanoscale building blocks to create the extracellular matrix mimetic implants for functional regeneration of the cornea.
Collapse
Affiliation(s)
- Bapan Pramanik
- Department of Chemistry, Ben Gurion University of the Negev, Be'er Sheva 84105, Israel; School of Pharmacy, University of Nottingham, NG7 2RD Nottingham, United Kingdom
| | - Mohammad M Islam
- Department of Ophthalmology, Massachusetts Eye and Ear and Schepens Eye Research Institute, Harvard Medical School, Boston, MA 02114, USA
| | - Hirak K Patra
- Department of Surgical Biotechnology, Division of Surgery and Interventional Science, University College London, NW3 2PF, United Kingdom.
| |
Collapse
|
8
|
Li P, Zhang M, Chen Z, Tian B, Kang X. Tissue-Engineered Injectable Gelatin-Methacryloyl Hydrogel-Based Adjunctive Therapy for Intervertebral Disc Degeneration. ACS OMEGA 2023; 8:13509-13518. [PMID: 37091429 PMCID: PMC10116505 DOI: 10.1021/acsomega.3c00211] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/15/2023] [Accepted: 03/14/2023] [Indexed: 05/03/2023]
Abstract
Gelatin-methacryloyl (GelMA) hydrogels are photosensitive with good biocompatibility and adjustable mechanical properties. The GelMA hydrogel composite system is a prospective therapeutic material based on a tissue engineering platform for treating intervertebral disc (IVD) degeneration (IVDD). The potential application value of the GelMA hydrogel composite system in the treatment of IVDD mainly includes three aspects: first, optimization of the current clinical treatment methods, including conservative treatment and surgical treatment; second, regeneration of IVD cells to reverse or repair IVDD; and finally, IVDD instead of injury plays a biomechanical role. In this paper, we summarized and analyzed the preparation of GelMA hydrogels and their excellent biological characteristics as carriers and comprehensively demonstrated the research status and prospects of GelMA hydrogel composite systems in IVDD treatment. In addition, the challenges facing the application of GelMA hydrogel composite systems and the progress of research on new hydrogels modified by GelMA hydrogels are presented. Hopefully, this study will provide theoretical guidance for the future application of GelMA hydrogel composite systems in IVDD.
Collapse
Affiliation(s)
- Peng Li
- Department
of Hand Surgery, Honghui Hospital, Xi’an
Jiao Tong University, Shaanxi 710054, P.R. China
| | - Ming Zhang
- Department
of General Practice, Honghui Hospital, Xi’an
Jiao Tong University, Shaanxi 710054, P.R. China
| | - Zhengyu Chen
- Department
of Spine Surgery, Xianyang First People’s
Hospital, Shaanxi, 712000, P.R. China
| | - Bin Tian
- Department
of Sports Medicine, Honghui Hospital, Xi’an
Jiao Tong University, Shaanxi 710054, P.R. China
| | - Xin Kang
- Department
of Sports Medicine, Honghui Hospital, Xi’an
Jiao Tong University, Shaanxi 710054, P.R. China
- E-mail:
| |
Collapse
|
9
|
Zihna G, Topuz B, Günal G, Aydin HM. Preparation of hybrid meniscal constructs using hydrogels and acellular matrices. JOURNAL OF BIOMATERIALS SCIENCE, POLYMER EDITION 2022; 34:587-611. [PMID: 36219154 DOI: 10.1080/09205063.2022.2135078] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
To search for a suitable meniscus repair material, acellular hybrid scaffolds consisting of in situ cross-linkable 3-D interpenetrating network structures were obtained by decellularization of the meniscus tissues followed by integration of the gel system. Decellularization efficiency was confirmed using a DNA quantification assay (82% decrease in DNA content) and histological stainings. In the second part of the study, the gelatin molecule was functionalized by adding methacrylic anhydride and the degree of functionalization was found to be 75% by (Proton-Nuclear Magnetic Resonance) 1H-NMR. Using this, a series of hybrid constructs named GelMA-Hybrid (G-Hybrid), GELMA/PEGDMA-Hybrid (PG-Hybrid), and GelMA/PEGDMA/HAMA-Hybrid (PGH-Hybrid) were prepared by cross-linking with UVA. Changes in the chemical structure were determined with Fourier Transform Infrared Spectrophotometer (FTIR). Water uptake capacities of cross-linked hybrid structures were measured in swelling studies, and it was found that hybrid scaffolds showed similar swelling properties compared to native counterparts. By compressive mechanical tests, enhanced mechanical properties were revealed in cross-linked scaffolds with PGH-Hybrid having the highest cross-link density. Protein denaturation and decomposition transition temperatures were improved by adding hydrogels to acellular scaffolds according to thermal gravimetric analyses (TGA). Cross-linked acellular scaffolds have exhibited a behavior close to native tissues with below 25% mass loss in phosphate buffer saline (PBS) and enzymatic solution. Cell viability was examined through Alamar Blue on the first day and cell viability in hybrid constructs was found to be above 80% while it was closer to the control group on the 7th day. It was concluded that the developed biomaterials could be used in meniscus tissue engineering with their tunable physicochemical and mechanical properties.
Collapse
Affiliation(s)
- Gizem Zihna
- Bioengineering Division, Institute of Science, Hacettepe University, Ankara, Turkey
| | - Bengisu Topuz
- Bioengineering Division, Institute of Science, Hacettepe University, Ankara, Turkey
| | - Gülçin Günal
- Bioengineering Division, Institute of Science, Hacettepe University, Ankara, Turkey
| | - Halil Murat Aydin
- Bioengineering Division, Institute of Science, Hacettepe University, Ankara, Turkey
- Centre for Bioengineering, Hacettepe University, Ankara, Turkey
| |
Collapse
|
10
|
Chen Y, Dong L, Kong B, Huang Y, Zhong S, Connon C, Tan J, Yang S, Sun W, Mi S. Effects of Gelatin Methacrylate Hydrogel on Corneal Repair and Regeneration in Rats. Transl Vis Sci Technol 2021; 10:25. [PMID: 34935910 PMCID: PMC8711000 DOI: 10.1167/tvst.10.14.25] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/03/2022] Open
Abstract
Purpose This study investigates the repairing process of rat cornea after surgery of lamellar keratoplasty (LKP) and evaluates the effects of gelatin methacrylate (GelMA) hydrogel. Methods In the LKP group, the lamellar stroma matrixes of Sprague-Dawley rats were transplanted to enhanced green fluorescent protein rats, whereas those in the GelMA group were also embedded with a GelMA hydrogel during the corneal transplantation. Grafted eyes were harvested on days seven, 30, and 90. Hematoxylin and eosin staining, immunofluorescence staining, scanning electron microscopy, optical coherence tomography, and a slit-lamp microscope were used to study the process of corneal restoration and regeneration. Results A total of 42 rats were analyzed, including 18 rats in each of the experimental group and six rats in the control group. After three months, the infiltration degree of inflammatory cells differed between the LKP group and the GelMA group (P < 0.001). Moreover, in multiple comparisons in corneal thickness, significant difference was observed between the LKP group and the GelMA group. There was also divergence in the results between the LKP group and the control group (P < 0.001, P < 0.001). At the same time, the expression of α-smooth muscle actin (α-SMA) and transforming growth factor (TGF)-β1 varied distinctly between the LKP group and the GelMA group (P < 0.05, P < 0.001). Conclusions Significant differences were demonstrated between the LKP group and the GelMA group in inflammatory cell infiltration, corneal thickness, as well as the expression of α-SMA and TGF-β1. Those differences indicate the ability of GelMA hydrogel to support alleviation in corneal stroma fibrosis and show the influences of fibrosis in the dysfunction of corneal refractive power. Translational Relevance Our research provides new ideas for the future development of LKP and tissue-engineered corneas.
Collapse
Affiliation(s)
- Yun Chen
- Macromolecular Platforms for Translational Medicine and Bio-Manufacturing Laboratory, Tsinghua-Berkeley Shenzhen Institute, Shenzhen, P.R. China.,Open FIESTA Center, International Graduate School at Shenzhen, Tsinghua University, Shenzhen, P.R. China
| | - Lina Dong
- Macromolecular Platforms for Translational Medicine and Bio-Manufacturing Laboratory, Tsinghua-Berkeley Shenzhen Institute, Shenzhen, P.R. China
| | - Bin Kong
- Macromolecular Platforms for Translational Medicine and Bio-Manufacturing Laboratory, Tsinghua-Berkeley Shenzhen Institute, Shenzhen, P.R. China
| | - Yu Huang
- Biomanufacturing Engineering Laboratory, International Graduate School at Shenzhen, Tsinghua University, Shenzhen, P.R. China
| | - Suyi Zhong
- Institute of Optical Imaging and Sensing, Shenzhen Key Laboratory for Minimal Invasive Medical Technologies, Graduate School at Shenzhen, Tsinghua University, Shenzhen, P.R. China
| | - Che Connon
- Biosciences Institute, Newcastle University
| | - Jiaqi Tan
- Open FIESTA Center, International Graduate School at Shenzhen, Tsinghua University, Shenzhen, P.R. China
| | - Siming Yang
- Key Laboratory of Wound Repair and Regeneration of PLA, Chinese PLA General Hospital, Medical College of PLA, Beijing, P.R. China
| | - Wei Sun
- Macromolecular Platforms for Translational Medicine and Bio-Manufacturing Laboratory, Tsinghua-Berkeley Shenzhen Institute, Shenzhen, P.R. China.,Department of Mechanical Engineering, Biomanufacturing Center, Tsinghua University, Beijing, P.R. China.,Department of Mechanical Engineering, Drexel University, Philadelphia, PA, USA
| | - Shengli Mi
- Macromolecular Platforms for Translational Medicine and Bio-Manufacturing Laboratory, Tsinghua-Berkeley Shenzhen Institute, Shenzhen, P.R. China.,Open FIESTA Center, International Graduate School at Shenzhen, Tsinghua University, Shenzhen, P.R. China.,Department of Mechanical Engineering, Biomanufacturing Center, Tsinghua University, Beijing, P.R. China
| |
Collapse
|
11
|
Jameson JF, Pacheco MO, Nguyen HH, Phelps EA, Stoppel WL. Recent Advances in Natural Materials for Corneal Tissue Engineering. Bioengineering (Basel) 2021; 8:161. [PMID: 34821727 PMCID: PMC8615221 DOI: 10.3390/bioengineering8110161] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2021] [Revised: 10/12/2021] [Accepted: 10/21/2021] [Indexed: 12/13/2022] Open
Abstract
Given the incidence of corneal dysfunctions and diseases worldwide and the limited availability of healthy, human donors, investigators are working to generate engineered cellular and acellular therapeutic approaches as alternatives to corneal transplants from human cadavers. These engineered strategies aim to address existing complications with human corneal transplants, including graft rejection, infection, and complications resulting from surgical methodologies. The main goals of these research endeavors are to (1) determine ideal mechanical properties, (2) devise methodologies to improve the efficacy of engineered corneal grafts and cell-based therapies, and (3) optimize transplantation of engineered tissue structures in the eye. Thus, recent innovations have sought to address these challenges through both in vitro and in vivo studies. This review covers recent work aimed at evaluating engineered materials, potential therapeutic cells, and the resulting cell-material interactions that lead to optimal corneal graft properties. Furthermore, we discuss promising strategies in corneal tissue engineering techniques and in vivo studies in animal models.
Collapse
Affiliation(s)
- Julie F. Jameson
- Department of Chemical Engineering, University of Florida, Gainesville, FL 32611, USA; (J.F.J.); (M.O.P.)
| | - Marisa O. Pacheco
- Department of Chemical Engineering, University of Florida, Gainesville, FL 32611, USA; (J.F.J.); (M.O.P.)
| | - Henry H. Nguyen
- Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA;
| | - Edward A. Phelps
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL 32611, USA;
| | - Whitney L. Stoppel
- Department of Chemical Engineering, University of Florida, Gainesville, FL 32611, USA; (J.F.J.); (M.O.P.)
| |
Collapse
|
12
|
Khosravimelal S, Mobaraki M, Eftekhari S, Ahearne M, Seifalian AM, Gholipourmalekabadi M. Hydrogels as Emerging Materials for Cornea Wound Healing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2006335. [PMID: 33887108 DOI: 10.1002/smll.202006335] [Citation(s) in RCA: 39] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/18/2020] [Revised: 12/15/2020] [Indexed: 06/12/2023]
Abstract
Hydrogel biomaterials have many favorable characteristics including tuneable mechanical behavior, cytocompatibility, optical properties suitable for regeneration and restoration of the damaged cornea tissue. The cornea is a tissue susceptible to various injuries and traumas with a complicated healing cascade, in which conserving its transparency and integrity is critical. Accordingly, the hydrogels' known properties along with the stimulation of nerve and cell regeneration make them ideal scaffold for corneal tissue engineering. Hydrogels have been used extensively in clinical applications for the repair and replacement of diseased organs. The development and optimizing of novel hydrogels to repair/replace corneal injuries have been the main focus of researches within the last decade. This research aims to critically review in vitro, preclinical, as well as clinical trial studies related to corneal wound healing using hydrogels in the past 10 years, as this is considered as an emerging technology for corneal treatment. Several unique modifications of hydrogels with smart behaviors have undergone early phase clinical trials and showed promising outcomes. Financially, this considers a multibillion dollars industry and with huge interest from medical devices as well as pharmaceutical industries with several products may emerge within the next five years.
Collapse
Affiliation(s)
- Sadjad Khosravimelal
- Department of Medical Biotechnology, Faculty of Allied Medicine, Iran University of Medical Sciences, Tehran, 1449614535, Iran
- Cellular and Molecular Research Centre, Iran University of Medical Sciences, Tehran, 1449614535, Iran
- Department of Tissue Engineering & Regenerative Medicine, Faculty of Advanced Technologies in Medicine, Iran University of Medical Sciences, Tehran, 1449614535, Iran
| | - Mohammadmahdi Mobaraki
- Department of Biomedical Engineering, Amirkabir University of Technology, Tehran, 1591634311, Iran
| | - Samane Eftekhari
- Department of Medical Biotechnology, Faculty of Allied Medicine, Iran University of Medical Sciences, Tehran, 1449614535, Iran
- Cellular and Molecular Research Centre, Iran University of Medical Sciences, Tehran, 1449614535, Iran
| | - Mark Ahearne
- Trinity Centre for Biomedical Engineering, School of Engineering, Trinity College Dublin, University of Dublin, Dublin, D02 R590, Republic of Ireland
| | - Alexander Marcus Seifalian
- Nanotechnology & Regenerative Medicine Commercialization Centre (NanoRegMed Ltd), London BioScience Innovation Centre, London, NW1 0NH, UK
| | - Mazaher Gholipourmalekabadi
- Cellular and Molecular Research Centre, Iran University of Medical Sciences, Tehran, 1449614535, Iran
- Department of Tissue Engineering & Regenerative Medicine, Faculty of Advanced Technologies in Medicine, Iran University of Medical Sciences, Tehran, 1449614535, Iran
| |
Collapse
|
13
|
Wang L, Fu H, Wang W, Liu Y, Li X, Yang J, Li L, Wu G, Pan Y. Notoginsenoside R1 functionalized gelatin hydrogels to promote reparative dentinogenesis. Acta Biomater 2021; 122:160-171. [PMID: 33348063 DOI: 10.1016/j.actbio.2020.12.031] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2020] [Revised: 12/10/2020] [Accepted: 12/14/2020] [Indexed: 12/20/2022]
Abstract
Pulp-capping materials are commonly adopted in the clinic to form reparative dentin and thus protect dental pulp tissues from cases of deep caries, accidentally exposed pulps or partial pulpotomy. Some traditional pulp capping materials used in the clinic include calcium hydroxide and mineral trioxide aggregates. However, there are limitations to thin restorative dentin, and a long period of time is needed to cause degenerative changes in dental pulp. In this paper, injectable colloidal gels were developed to induce the formation of reparative dentin through a simple UV method from methacrylic acid functionalized gelatin loaded with notoginsenoside R1 (Gel-MA/NGR1). The results of the physicochemical property examinations showed that the prepared Gel-MA/NGR1 hydrogel possessed an appropriate interconnected porous microarchitecture with a pore size of 10.5 micrometres and suitable mechanical properties with a modulus of 50-60 kPa, enabling cell adhesion and proliferation. The hydrogel remained hydrophilic with sustained drug release performance. In addition, Gel-MA/NGR1 significantly enhanced the odontogenetic differentiation of mouse dental papilla cells by elevating the expression levels of the dentinogenic markers ALP and OCN and extracellular matrix mineralization. In vivo stimulation was carried out by injecting the precursors into the predrilled alveolar cavity of Sprague-Dawley rats followed by immediate in situ UV crosslinking. The results showed that Gel-MA/NGR1 has a strong capacity to promote reparative dentin formation. Haematoxylin& eosin, Masson, and immunohistochemical staining (DMP-1, DSPP, OCN and RUNX2) and micro-CT were employed to illustrate the effectiveness of dentinogenesis, and the relative volumes of calcification were found to have increased ~175-fold. All of the results showed that the Gel-MA/NGR1 hydrogel promoted reparative dentin formation, which suggests that this hydrogel provides great potential as a pulp-capping material to induce dentin formation.
Collapse
Affiliation(s)
- Lei Wang
- Institute of Stomatology, School & Hospital of Stomatology, Wenzhou Medical University, Wenzhou, Zhejiang325027, China; Department of Oral Implantology and Prosthetic Dentistry, Academic Centre for Dentistry Amsterdam (ACTA), University of Amsterdam (UvA) and VrijeUniversiteit Amsterdam (VU), 1081 LA, Amsterdam, the Netherlands; Wenzhou Institute of Biomaterials & Engineering, University of Chinese Academy of Science, Wenzhou, Zhejiang325027, China
| | - Hui Fu
- Institute of Stomatology, School & Hospital of Stomatology, Wenzhou Medical University, Wenzhou, Zhejiang325027, China
| | - Wenwen Wang
- Nanjing Drum Tower Hospital Clinical College of Traditional Chinese and Western Medicine, Nanjing University of Chinese Medicine, Nanjing210008, China; Engineering Research Center of Clinical Functional Materials and Diagnosis & Treatment Devices of Zhejiang Province, Wenzhou Institute of Biomaterials and Engineering, Wenzhou, Zhejiang325027, China
| | - Yi Liu
- Key Laboratory of Oral Medicine, Guangzhou Institute of Oral Disease, Stomatology Hospital of Guangzhou Medical University, Guangzhou Medical University, Guangzhou510140, China
| | - Xumin Li
- Institute of Stomatology, School & Hospital of Stomatology, Wenzhou Medical University, Wenzhou, Zhejiang325027, China; Department of Oral Implantology and Prosthetic Dentistry, Academic Centre for Dentistry Amsterdam (ACTA), University of Amsterdam (UvA) and VrijeUniversiteit Amsterdam (VU), 1081 LA, Amsterdam, the Netherlands
| | - Jijing Yang
- Institute of Stomatology, School & Hospital of Stomatology, Wenzhou Medical University, Wenzhou, Zhejiang325027, China
| | - Lingli Li
- State Key Laboratory of Ophthalmology, Optometry and Visual Science, Wenzhou Medical University, Wenzhou325027, China.
| | - Gang Wu
- Department of Oral Implantology and Prosthetic Dentistry, Academic Centre for Dentistry Amsterdam (ACTA), University of Amsterdam (UvA) and VrijeUniversiteit Amsterdam (VU), 1081 LA, Amsterdam, the Netherlands; Department of Oral and Maxillofacial Surgery/Pathology, Amsterdam UMC and Academic Center for Dentistry Amsterdam (ACTA), VrijeUniversiteit Amsterdam (VU), Amsterdam Movement Science, Amsterdam, the Netherlands.
| | - Yihuai Pan
- Institute of Stomatology, School & Hospital of Stomatology, Wenzhou Medical University, Wenzhou, Zhejiang325027, China; Department of Endodontics, School & Hospital of Stomatology, Wenzhou Medical University, Wenzhou, Zhejiang, 325027, China.
| |
Collapse
|
14
|
Xiang L, Cui W. Biomedical application of photo-crosslinked gelatin hydrogels. JOURNAL OF LEATHER SCIENCE AND ENGINEERING 2021. [DOI: 10.1186/s42825-020-00043-y] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
Abstract
During the past decades, photo-crosslinked gelatin hydrogel (methacrylated gelatin, GelMA) has gained a lot of attention due to its remarkable application in the biomedical field. It has been widely used in cell transplantation, cell culture and drug delivery, based on its crosslinking to form hydrogels with tunable mechanical properties and excellent bio-compatibility when exposed to light irradiation to mimic the micro-environment of native extracellular matrix (ECM). Because of its unique biofunctionality and mechanical tenability, it has also been widely applied in the repair and regeneration of bone, heart, cornea, epidermal tissue, cartilage, vascular, peripheral nerve, oral mucosa, and skeletal muscle et al. The purpose of this review is to summarize the recent application of GelMA in drug delivery and tissue engineering field. Moreover, this review article will briefly introduce both the development of GelMA and the characterization of GelMA. Finally, we discuss the challenges and future development prospects of GelMA as a tissue engineering material and drug or gene delivery carrier, hoping to contribute to accelerating the development of GelMA in the biomedical field.
Graphical abstract
Collapse
|
15
|
Mozafari M, Al-Maadeed MASA. Biomaterials Science and Engineering in the Middle East. ACS Biomater Sci Eng 2020; 6:1-3. [DOI: 10.1021/acsbiomaterials.9b01970] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|