Hyaluronic Acid Macromer Molecular Weight Dictates the Biophysical Properties and in Vitro Cellular Response to Semisynthetic Hydrogels

Extracellular matrix-inspired biomaterials for wound healing

Diabetic foot ulcers (DFU) are a debilitating and life-threatening complication of Diabetes Mellitus. Ulceration develops from a combination of associated diabetic complications, including neuropathy, circulatory dysfunction, and repetitive trauma, and they affect approximately 19-34% of patients as a result. The severity and chronic nature of diabetic foot ulcers stems from the disruption to normal wound healing, as a result of the molecular mechanisms which underly diabetic pathophysiology. The current standard-of-care is clinically insufficient to promote healing for many DFU patients, resulting in a high frequency of recurrence and limb amputations. Biomaterial dressings, and in particular those derived from the extracellular matrix (ECM), have emerged as a promising approach for the treatment of DFU. By providing a template for cell infiltration and skin regeneration, ECM-derived biomaterials offer great hope as a treatment for DFU. A range of approaches exist for the development of ECM-derived biomaterials, including the use of purified ECM components, decellularisation and processing of donor/ animal tissues, or the use of in vitro-deposited ECM. This review discusses the development and assessment of ECM-derived biomaterials for the treatment of chronic wounds, as well as the mechanisms of action through which ECM-derived biomaterials stimulate wound healing.

Acrylated Hyaluronic-Acid Based Hydrogel for the Treatment of Craniofacial Volumetric Muscle Loss

Current treatment options for craniofacial volumetric muscle loss (VML) have disadvantages and cannot fully restore normal function. Bio-inspired semisynthetic acrylated hyaluronic acid (AcHyA) hydrogel, which fills irregularly shaped defects, resembles an extracellular matrix, and induces a minimal inflammatory response, has shown promise in experimental studies of extremity VML. We therefore sought to study AcHyA hydrogel in the treatment of craniofacial VML. For this, we used a novel model of masseter VML in the rat. Following the creation of a 5 mm × 5 mm injury to the superficial masseter and administration of AcHyA to the wound, masseters were explanted between 2 and 16 weeks postoperatively and were analyzed for evidence of muscle regeneration including fibrosis, defect size, and fiber cross-sectional area (FCSA). At 8 and 16 weeks, masseters treated with AcHyA showed significantly less fibrosis than nonrepaired controls and a smaller decrease in defect size. The mean FCSA among fibers near the defect was significantly greater among hydrogel-repaired than control masseters at 8 weeks, 12 weeks, and 16 weeks. These results show that the hydrogel mitigates the fibrotic healing response and wound contracture. Our findings also suggest that hydrogel-based treatments have potential use as a treatment for the regeneration of craniofacial VML and demonstrate a system for evaluating subsequent iterations of materials in VML injuries.

Mechanical forces amplify TCR mechanotransduction in T cell activation and function

Adoptive T cell immunotherapies, including engineered T cell receptor (eTCR) and chimeric antigen receptor (CAR) T cell immunotherapies, have shown efficacy in treating a subset of hematologic malignancies, exhibit promise in solid tumors, and have many other potential applications, such as in fibrosis, autoimmunity, and regenerative medicine. While immunoengineering has focused on designing biomaterials to present biochemical cues to manipulate T cells ex vivo and in vivo, mechanical cues that regulate their biology have been largely underappreciated. This review highlights the contributions of mechanical force to several receptor-ligand interactions critical to T cell function, with central focus on the TCR-peptide-loaded major histocompatibility complex (pMHC). We then emphasize the role of mechanical forces in (i) allosteric strengthening of the TCR-pMHC interaction in amplifying ligand discrimination during T cell antigen recognition prior to activation and (ii) T cell interactions with the extracellular matrix. We then describe approaches to design eTCRs, CARs, and biomaterials to exploit TCR mechanosensitivity in order to potentiate T cell manufacturing and function in adoptive T cell immunotherapy.

Review: Human stem cell-based 3D in vitro angiogenesis models for preclinical drug screening applications

Vascular diseases are the underlying pathology in many life-threatening illnesses. Human cellular and molecular mechanisms involved in angiogenesis are complex and difficult to study in current 2D in vitro and in vivo animal models. Engineered 3D in vitro models that incorporate human pluripotent stem cell (hPSC) derived endothelial cells (ECs) and supportive biomaterials within a dynamic microfluidic platform provide a less expensive, more controlled, and reproducible platform to better study angiogenic processes in response to external chemical or physical stimulus. Current studies to develop 3D in vitro angiogenesis models aim to establish single-source systems by incorporating hPSC-ECs into biomimetic extracellular matrices (ECM) and microfluidic devices to create a patient-specific, physiologically relevant platform that facilitates preclinical study of endothelial cell-ECM interactions, vascular disease pathology, and drug treatment pharmacokinetics. This review provides a detailed description of the current methods used for the directed differentiation of human stem cells to endothelial cells and their use in engineered 3D in vitro angiogenesis models that have been developed within the last 10 years.

Functionalised biomaterials as synthetic extracellular matrices to promote vascularisation and healing of diabetic wounds

Diabetic foot ulcers (DFU) are a type of chronic wound that constitute one of the most serious and debilitating complications associated with diabetes. The lack of clinically efficacious treatments to treat these recalcitrant wounds can lead to amputations for those worst affected. Biomaterial-based approaches offer great hope in this regard, as they provide a template for cell infiltration and tissue repair. However, there is an additional need to treat the underlying pathophysiology of DFUs, in particular insufficient vascularization of the wound which significantly hampers healing. Thus, the addition of pro-angiogenic moieties to biomaterials is a promising strategy to promote the healing of DFUs and other chronic wounds. In this review, we discuss the potential of biomaterials as treatments for DFU and the approaches that can be taken to functionalise these biomaterials such that they promote vascularisation and wound healing in pre-clinical models.

3D printed scaffolds based on hyaluronic acid bioinks for tissue engineering: a review

Hyaluronic acid (HA) is widely distributed in human connective tissue, and its unique biological and physicochemical properties and ability to facilitate biological structure repair make it a promising candidate for three-dimensional (3D) bioprinting in the field of tissue regeneration and biomedical engineering. Moreover, HA is an ideal raw material for bioinks in tissue engineering because of its histocompatibility, non-immunogenicity, biodegradability, anti-inflammatory properties, anti-angiogenic properties, and modifiability. Tissue engineering is a multidisciplinary field focusing on in vitro reconstructions of mammalian tissues, such as cartilage tissue engineering, neural tissue engineering, skin tissue engineering, and other areas that require further clinical applications. In this review, we first describe the modification methods, cross-linking methods, and bioprinting strategies for HA and its derivatives as bioinks and then critically discuss the strengths, shortcomings, and feasibility of each method. Subsequently, we reviewed the practical clinical applications and outcomes of HA bioink in 3D bioprinting. Finally, we describe the challenges and opportunities in the development of HA bioink to provide further research references and insights.

A facile bioorthogonal chemistry-based reversible to irreversible strategy to surmount the dilemma between injectability and stability of hyaluronic acid hydrogels

Injectable and stable hydrogels have great promise for clinical applications. Fine-tuning the injectability and the stability of the hydrogels at different stages has been challenging due to the limited number of coupling reactions. A distinct "reversible to irreversible" concept using a thiazolidine-based bioorthogonal reaction between 1,2-aminothiols and aldehydes in physiological conditions to surmount the dilemma between injectability and stability is presented for the first time. Upon mixing aqueous solutions of aldehyde-functionalized hyaluronic acid (SA-HA) and cysteine-capped ethylenediamine (DI-Cys), SA-HA/DI-Cys hydrogels formed through reversible hemithioacetal crosslinking within 2 min. The reversible kinetic intermediate facilitated thiol-triggered gel-to-sol transition, shear-thinning and injectability of the SA-HA/DI-Cys hydrogel but then converted to the irreversible thermodynamic network after injection, thereby permitting the resulting gel with improved stability. As compared to the Schiff base hydrogels, the hydrogels generated from this simple, yet effective concept awarded improved protection to the embedded mesenchymal stem cells and fibroblast during injection, retained the cells homogeneously within the gel, and allowed them further proliferation in vitro and in vivo. There is potential for the proposed approach of "reversible to irreversible" based on thiazolidine chemistry to be applied as a general coupling technique for developing injectable and stable hydrogels for biomedical applications.

Polysaccharide hydrogel platforms as suitable carriers of liposomes and extracellular vesicles for dermal applications

Lipid-based nanocarriers have been extensively investigated for their application in drug delivery. Particularly, liposomes are now clinically established for treating various diseases such as fungal infections. In contrast, extracellular vesicles (EVs) - small cell-derived nanoparticles involved in cellular communication - have just recently sparked interest as drug carriers but their development is still at the preclinical level. To drive this development further, the methods and technologies exploited in the context of liposome research should be applied in the domain of EVs to facilitate and accelerate their clinical translation. One of the crucial steps for EV-based therapeutics is designing them as proper dosage forms for specific applications. This review offers a comprehensive overview of state-of-the-art polysaccharide-based hydrogel platforms designed for artificial and natural vesicles with application in drug delivery to the skin. We discuss their various physicochemical and biological properties and try to create a sound basis for the optimization of EV-embedded hydrogels as versatile therapeutic avenues.

Diversity of Bioinspired Hydrogels: From Structure to Applications

Hydrogels are three-dimensional networks with a variety of structures and functions that have a remarkable ability to absorb huge amounts of water or biological fluids. They can incorporate active compounds and release them in a controlled manner. Hydrogels can also be designed to be sensitive to external stimuli: temperature, pH, ionic strength, electrical or magnetic stimuli, specific molecules, etc. Alternative methods for the development of various hydrogels have been outlined in the literature over time. Some hydrogels are toxic and therefore are avoided when obtaining biomaterials, pharmaceuticals, or therapeutic products. Nature is a permanent source of inspiration for new structures and new functionalities of more and more competitive materials. Natural compounds present a series of physico-chemical and biological characteristics suitable for biomaterials, such as biocompatibility, antimicrobial properties, biodegradability, and nontoxicity. Thus, they can generate microenvironments comparable to the intracellular or extracellular matrices in the human body. This paper discusses the main advantages of the presence of biomolecules (polysaccharides, proteins, and polypeptides) in hydrogels. Structural aspects induced by natural compounds and their specific properties are emphasized. The most suitable applications will be highlighted, including drug delivery, self-healing materials for regenerative medicine, cell culture, wound dressings, 3D bioprinting, foods, etc.

A Biomimetic, Bilayered Antimicrobial Collagen-Based Scaffold for Enhanced Healing of Complex Wound Conditions

Chronic, nonhealing wounds in the form of diabetic foot ulcers (DFUs) are a major complication for diabetic patients. The inability of a DFU to heal appropriately leads to an open wound with a high risk of infection. Current standards of care fail to fully address either the underlying defective wound repair mechanism or the risk of microbial infection. Thus, it is clear that novel approaches are needed. One such approach is the use of multifunctional biomaterials as platforms to direct and promote wound healing. In this study, a biomimetic, bilayered antimicrobial collagen-based scaffold was developed to deal with the etiology of DFUs. An epidermal, antimicrobial collagen/chitosan film for the prevention of wound infection was combined with a dermal collagen-glycosaminoglycan scaffold, which serves to support angiogenesis in the wound environment and ultimately accelerate wound healing. Biophysical and biological characterization identified an 1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide cross-linked bilayered scaffold to have the highest structural stability with similar mechanical properties to products on the market, exhibiting a similar structure to native skin, successfully inhibiting the growth and infiltration of Staphylococcus aureus and supporting the proliferation of epidermal cells on its surface. This bilayered scaffold also demonstrated the ability to support the proliferation of key cell types involved in vascularization, namely, induced pluripotent stem cell derived endothelial cells and supporting stromal cells, with early signs of organization of these cells into vascular structures, showing great promise for the promotion of angiogenesis. Taken together, the results indicate that the bilayered scaffold is an excellent candidate for enhancement of diabetic wound healing by preventing wound infection and supporting angiogenesis.

Enzymatically mediated Gleditsia sinensis galactomannan based hydrogel inspired by wound healing process

The self-healing property based on metal-ligand physical coordination is particularly interesting in bio-hydrogel science due to its allowance for multiple local healing events to process. As the most abundant renewable green resource in nature, Gleditsia sinensis galactomannan has great potential as a starting material for functional materials. In this study, the biocompatible Gleditsia sinensis galactomannan and cellulose were firstly chemically modified and then taken as the main constituent for constructing the metal-ligand coordination through an enzyme-regulated strategy. The hydrogel could quickly gelatinize in the surrounding environment, corresponding to the violent exothermic phenomenon, and exhibit extraordinary self-healing behavior. The molecular dynamics simulation of the hydrogel confirmed the more stable coordinated configuration from Fe(III)-chelates than Fe(II)-chelates. The morphology, mechanical property, antibacterial, and cytotoxicity of the prepared hydrogel were also studied. Our results indicated that galactomannan hydrogel based on the metal-ligand networks could balance the kinetic stability and intrinsic healability through the enzyme-induced route, which provide a new perspective in the field of biomaterial applications.

Management of Brain Cancer and Neurodegenerative Disorders with Polymer-Based Nanoparticles as a Biocompatible Platform

The blood-brain barrier (BBB) serves as a protective barrier for the central nervous system (CNS) against drugs that enter the bloodstream. The BBB is a key clinical barrier in the treatment of CNS illnesses because it restricts drug entry into the brain. To bypass this barrier and release relevant drugs into the brain matrix, nanotechnology-based delivery systems have been developed. Given the unstable nature of NPs, an appropriate amount of a biocompatible polymer coating on NPs is thought to have a key role in reducing cellular cytotoxicity while also boosting stability. Human serum albumin (HSA), poly (lactic-co-glycolic acid) (PLGA), Polylactide (PLA), poly (alkyl cyanoacrylate) (PACA), gelatin, and chitosan are only a few of the significant polymers mentioned. In this review article, we categorized polymer-coated nanoparticles from basic to complex drug delivery systems and discussed their application as novel drug carriers to the brain.

Engineering approaches for cardiac organoid formation and their characterization

Cardiac organoids are 3-dimensional (3D) structures composed of tissue or niche-specific cells, obtained from diverse sources, encapsulated in either a naturally derived or synthetic, extracellular matrix scaffold, and include exogenous biochemical signals such as essential growth factors. The overarching goal of developing cardiac organoid models is to establish a functional integration of cardiomyocytes with physiologically relevant cells, tissues, and structures like capillary-like networks composed of endothelial cells. These organoids used to model human heart anatomy, physiology, and disease pathologies in vitro have the potential to solve many issues related to cardiovascular drug discovery and fundamental research. The advent of patient-specific human-induced pluripotent stem cell-derived cardiovascular cells provide a unique, single-source approach to study the complex process of cardiovascular disease progression through organoid formation and incorporation into relevant, controlled microenvironments such as microfluidic devices. Strategies that aim to accomplish such a feat include microfluidic technology-based approaches, microphysiological systems, microwells, microarray-based platforms, 3D bioprinted models, and electrospun fiber mat-based scaffolds. This article discusses the engineering or technology-driven practices for making cardiac organoid models in comparison with self-assembled or scaffold-free methods to generate organoids. We further discuss emerging strategies for characterization of the bio-assembled cardiac organoids including electrophysiology and machine-learning and conclude with prospective points of interest for engineering cardiac tissues in vitro.

HYDRHA: Hydrogels of hyaluronic acid. New biomedical approaches in cancer, neurodegenerative diseases, and tissue engineering

In the last decade, hyaluronic acid (HA) has attracted an ever-growing interest in the biomedical engineering field as a biocompatible, biodegradable, and chemically versatile molecule. In fact, HA is a major component of the extracellular matrix (ECM) and is essential for the maintenance of cellular homeostasis and crosstalk. Innovative experimental strategies in vitro and in vivo using three-dimensional (3D) HA systems have been increasingly reported in studies of diseases, replacement of tissue and organ damage, repairing wounds, and encapsulating stem cells for tissue regeneration. The present work aims to give an overview and comparison of recent work carried out on HA systems showing advantages, limitations, and their complementarity, for a comprehensive characterization of their use. A special attention is paid to the use of HA in three important areas: cancer, diseases of the central nervous system (CNS), and tissue regeneration, discussing the most innovative experimental strategies. Finally, perspectives within and beyond these research fields are discussed.

Validating the Arrhythmogenic Potential of High-, Intermediate-, and Low-Risk Drugs in a Human-Induced Pluripotent Stem Cell-Derived Cardiac Microphysiological System

Evaluation of arrhythmogenic drugs is required by regulatory agencies before any new compound can obtain market approval. Despite rigorous review, cardiac disorders remain the second most common cause for safety-related market withdrawal. On the other hand, false-positive preclinical findings prohibit potentially beneficial candidates from moving forward in the development pipeline. Complex in vitro models using cardiomyocytes derived from human-induced pluripotent stem cells (hiPSC-CM) have been identified as a useful tool that allows for rapid and cost-efficient screening of proarrhythmic drug risk. Currently available hiPSC-CM models employ simple two-dimensional (2D) culture formats with limited structural and functional relevance to the human heart muscle. Here, we present the use of our 3D cardiac microphysiological system (MPS), composed of a hiPSC-derived heart micromuscle, as a platform for arrhythmia risk assessment. We employed two different hiPSC lines and tested seven drugs with known ion channel effects and known clinical risk: dofetilide and bepridil (high risk); amiodarone and terfenadine (intermediate risk); and nifedipine, mexiletine, and lidocaine (low risk). The cardiac MPS successfully predicted drug cardiotoxicity risks based on changes in action potential duration, beat waveform (i.e., shape), and occurrence of proarrhythmic events of healthy patient hiPSC lines in the absence of risk cofactors. We showcase examples where the cardiac MPS outperformed existing hiPSC-CM 2D models.

Advances in Hyaluronic Acid for Biomedical Applications

Hyaluronic acid (HA) is a large non-sulfated glycosaminoglycan that is the main component of the extracellular matrix (ECM). Because of its strong and diversified functions applied in broad fields, HA has been widely studied and reported previously. The molecular properties of HA and its derivatives, including a wide range of molecular weights but distinct effects on cells, moisture retention and anti-aging, and CD44 targeting, promised its role as a popular participant in tissue engineering, wound healing, cancer treatment, ophthalmology, and cosmetics. In recent years, HA and its derivatives have played an increasingly important role in the aforementioned biomedical fields in the formulation of coatings, nanoparticles, and hydrogels. This article highlights recent efforts in converting HA to smart formulation, such as multifunctional coatings, targeted nanoparticles, or injectable hydrogels, which are used in advanced biomedical application.

Semisynthetic Hyaluronic Acid-Based Hydrogel Promotes Recovery of the Injured Tibialis Anterior Skeletal Muscle Form and Function

Volumetric muscle loss (VML) injuries are characterized by a degree of tissue loss that exceeds the endogenous regenerative capacity of muscle, resulting in permanent structural and functional deficits. Such injuries are a consequence of trauma, as well as a host of congenital and acquired diseases and disorders. Despite significant preclinical research with diverse biomaterials, as well as early clinical studies with implantation of decellularized extracellular matrices, there are still significant barriers to more complete restoration of muscle form and function following repair of VML injuries. In fact, identification of novel biomaterials with more advantageous regenerative profiles is a critical limitation to the development of improved therapeutics. As a first step in this direction, we evaluated a novel semisynthetic hyaluronic acid-based (HyA) hydrogel that embodies material features more favorable for robust muscle regeneration. This HyA-based hydrogel is composed of an acrylate-modified HyA (AcHyA) macromer, an AcHyA macromer conjugated with the bsp-RGD(15) peptide sequence to enhance cell adhesion, a high-molecular-weight heparin to sequester growth factors, and a matrix metalloproteinase-cleavable cross-linker to allow for cell-dependent remodeling. In a well-established, clinically relevant rat tibialis anterior VML injury model, we report observations of robust functional recovery, accompanied by volume reconstitution, muscle regeneration, and native-like vascularization following implantation of the HyA-based hydrogel at the site of injury. These findings have important implications for the development and clinical application of the improved biomaterials that will be required for stable and complete functional recovery from diverse VML injuries.

Silk degumming time controls horseradish peroxidase-catalyzed hydrogel properties

Hydrogels provide promising applications in tissue engineering and regenerative medicine, with silk fibroin (SF) offering biocompatibility, biodegradability and tunable mechanical properties. The molecular weight (MW) distribution of SF chains varies from ∼80 to 400 kDa depending on the extraction and purification process utilized to prepare the protein polymer. Here, we report a fundamental study on the effect of different silk degumming (extraction) time (DT) on biomaterial properties of enzymatically crosslinked hydrogels, including secondary structure, mechanical stiffness, in vitro degradation, swelling/contraction, optical transparency and cell behaviour. The results indicate that DT plays a crucial role in determining material properties of the hydrogel; decrease in DT increases β-sheet (crystal) formation and mechanical stiffness while decreasing degradation rate and optical transparency. The findings on the relationships between properties of silk hydrogels and DT should facilitate the more rational design of silk-based hydrogel biomaterials to match properties needed for diverse purpose in biomedical engineering.