Microfluidic Approach to Generate a Tadpole-Egg-Shaped Alginate Fiber and Its Application in Tissue Engineering

Incorporation of montmorillonite into microfluidics-generated chitosan microfibers enhances neuron-like PC12 cells for application in neural tissue engineering

The complexity in structure and function of the nervous system, as well as its slow rate of regeneration, makes it more difficult to treat it compared to other tissues. Neural tissue engineering aims to create an appropriate environment for nerve cell proliferation and differentiation. Fibrous scaffolds with suitable morphology and topography and better mimicry of the extracellular matrix have been promising for the alignment and migration of neural cells. On this premise, to improve the properties of the scaffold, we combined montmorillonite (MMT) with chitosan (CS) polymer and created microfibers with variable diameters and varied concentrations of MMT using microfluidic technology and tested its suitability for the rat pheochromocytoma cell line (PC12). According to the findings, CS/MMT 0.1 % compared to CS/MMT 0 % microfibers showed a 201 MPa increase in Young's modulus, a 68 mS/m increase in conductivity, and a 1.4-fold increase in output voltage. Analysis of cell mitochondrial activity verified the non-toxicity, resulting in good cell morphology with orientation along the microfiber. Overall, the results of this project showed that with a low concentration of MMT, the properties of microfibers can be significantly improved and a suitable scaffold can be designed for neural tissue engineering.

Effect of Flow Velocity on Laminar Flow in Microfluidic Chips

Gel fibers prepared based on microfluidic laminar flow technology have important research value in constructing biomimetic scaffolds and tissue engineering. The key point of microfluidic laminar flow technology is to find the appropriate fluid flow rate in the micropipe. In order to explore the influence of flow rate on the laminar flow phenomenon of a microfluidic chip, a microfluidic chip composed of an intermediate main pipe and three surrounding outer pipes are designed, and the chip is prepared by photolithography and the composite molding method. Then, a syringe pump is used to inject different fluids into the microtubing, and the data of fluid motion are obtained through fluid dynamics simulation and finite element analysis. Finally, a series of optimal adjustments are made for different fluid composition and flow rate combinations to achieve the fluid's stable laminar flow state. It was determined that when the concentration of sodium alginate in the outer phase was 1 wt% and the concentration of CaCl₂ in the inner phase was 0.1 wt%, the gel fiber prepared was in good shape, the flow rate was the most stable, and laminar flow was the most obvious when the flow rate of both was 1 mL/h. This study represents a preliminary achievement in exploring the laminar flow rate and fabricating gel fibers, thus offering significant reference value for investigating microfluidic laminar flow technology.

Polysaccharide-Based Materials Created by Physical Processes: From Preparation to Biomedical Applications

Polysaccharide-based materials created by physical processes have received considerable attention for biomedical applications. These structures are often made by associating charged polyelectrolytes in aqueous solutions, avoiding toxic chemistries (crosslinking agents). We review the principal polysaccharides (glycosaminoglycans, marine polysaccharides, and derivatives) containing ionizable groups in their structures and cellulose (neutral polysaccharide). Physical materials with high stability in aqueous media can be developed depending on the selected strategy. We review strategies, including coacervation, ionotropic gelation, electrospinning, layer-by-layer coating, gelation of polymer blends, solvent evaporation, and freezing-thawing methods, that create polysaccharide-based assemblies via in situ (one-step) methods for biomedical applications. We focus on materials used for growth factor (GFs) delivery, scaffolds, antimicrobial coatings, and wound dressings.

One-Step Generation of Aqueous-Droplet-Filled Hydrogel Fibers as Organoid Carriers Using an All-in-Water Microfluidic System

Hydrogel fibers are promising carriers for biological applications due to their flexible mechanical properties, well-defined spatial distribution, and excellent biocompatibility. In particular, the droplet-filled hydrogel fibers with the controllable dimension and location of droplets display great advantages to enhance the loading capacity of multiple components and biofunctions. In this work, we proposed a new all-in-water microfluidic system that allows for one-step fabrication of aqueous-droplet-filled hydrogel fibers (ADHFs) with unique morphology and tunable configurations. In the system, the aqueous droplets with equidistance are successfully arranged within the alginate calcium fibers, relying on the design of the pump valve cycle and the select of two immiscible liquids with a stable aqueous interface. The architecture of the ADHF can be flexibly controlled by adjusting the three phase flow rates and the valve switch cycle. The produced ADHFs exhibit high controllability, uniformity, biocompatibility, and stability. The established system enabled the formation of functional human islet organoids in situ through encapsulating pancreatic endocrine progenitor cells within microfibers. The generated islet organoids within droplets exhibit high cell viability and islet-specific function of insulin secretion. The proposed approach provides a new way to fabricate multifunctional hydrogel fibers for materials sciences, tissue engineering, and regenerative medicine.