Rh/TiO2-Photocatalyzed Acceptorless Dehydrogenation of N-Heterocycles upon Visible-Light Illumination

Phenalenyl-Based Photocatalyst for Bioinspired Oxidative Dehydrogenation of N-Heterocycles and Benzyl Alcohols

The environmental benefits of molecular oxygen as the oxidizing agent in oxidation reactions that synthesize fine chemicals cannot be overstated. Increased interest in developing robust photocatalysts is stimulated by the fact that the current photocatalytic transformation boom has made previously inaccessible synthetic approaches possible. Motivated by enzymatic catalysis, employing a reusable phenalenyl-based photocatalyst, we have successfully developed oxidative dehydrogenation utilizing molecular oxygen as a greener oxidant. Under photoinduced oxidative dehydrogenation conditions, different types of saturated N-heterocycles and alcohols were successfully dehydrogenated. The versatility of this bioinspired protocol is demonstrated by the fact that a wide variety of N-heteroaromatics, such as quinoline, carbazole, quinoxaline, acridine, and indole derivatives, as well as aldehydes and ketones, were successfully synthesized. Detailed mechanistic studies validate the proposed mechanism. Fluorescence lifetime and CV experiments revealed the crucial role of water on the efficiency of the reaction. The present protocol also provides chemoselectivity and scalability, leading to superior results and allowing for the functionalization of bioactive molecules at a late stage in a sustainable manner.

Selective electrochemical acceptorless dehydrogenation reactions of tetrahydroisoquinoline derivatives

Selective dehydrogenation reactions of tetrahydroisoquinoline derivatives through electrochemical oxidation are disclosed. In the presence of nitric acid, the selective partial dehydrogenation of tetrahydroisoquinolines to form 3,4-dihydroisoquinolines was achieved via anodic oxidation. The results of CV (Cyclic Voltammograms) experiments and DFT calculations showed the 3,4-dihydroisoquinolines protonated by an external Brønsted acid to be less prone than their unprotonated counterparts to oxidation under electrochemical conditions, thus avoiding their further dehydrogenation. Moreover, a TEMPO-mediated electrochemical oxidation enabled a complete dehydrogenation to yield fully aromatized isoquinolines. Thus, tunable processes involving electrochemical dehydrogenation of tetrahydroisoquinolines could be used to selectively produce various 3,4-dihydroisoquinolines and isoquinoline derivatives.

Thermodynamic evaluations of the acceptorless dehydrogenation and hydrogenation of pre-aromatic and aromatic N-heterocycles in acetonitrile

N-heterocycles are important chemical hydrogen-storage materials, and the acceptorless dehydrogenation and hydrogenation of N-heterocycles as organic hydrogen carriers have been widely studied, with the main focus on the catalyst synthesis and design, investigation of the redox mechanisms, and extension of substrate scope. In this work, the Gibbs free energies of the dehydrogenation of pre-aromatic N-heterocycles (YH2) and the hydrogenation of aromatic N-heterocycles (Y), i.e., ΔGH2R(YH2) and ΔGH2A(Y), were derived by constructing thermodynamic cycles using Hess' law. The thermodynamic abilities for the acceptorless dehydrogenation and hydrogenation of 78 pre-aromatic N-heterocycles (YH2) and related 78 aromatic N-heterocycles (Y) were well evaluated and discussed in acetonitrile. Moreover, the applications of the two thermodynamic parameters in identifying pre-aromatic N-heterocycles possessing reversible dehydrogenation and hydrogenation properties and the selection of the pre-aromatic N-heterocyclic hydrogen reductants in catalytic hydrogenation were considered and are discussed in detail. Undoubtedly, this work focuses on two new thermodynamic parameters of pre-aromatic and aromatic N-heterocycles, namely ΔGH2R(YH2) and ΔGH2A(Y), which are important supplements to our previous work to offer precise insights into the chemical hydrogen storage and hydrogenation reactions of pre-aromatic and aromatic N-heterocycles.

Hydrogenation and dehydrogenation of N-heterocycles under Cp*Co(III)-catalysis

To realize the goal of a carbon-free energy economy, it is crucial to discover reactions that utilize sustainable resources as alternatives to fossil feedstocks. In this study, a well-defined, air-stable Cp*Co(III)-catalyst for transfer hydrogenation of quinoline derivatives and oxidative dehydrogenation of cyclic amines in water is developed. While the former reaction is promoted by formic acid as a transfer hydrogenation reagent, the latter is mediated by molecular oxygen as the sole oxidant. These processes provide new avenues for the investigation of air-stable cobalt catalysts for environmentally benign hydrogenation and dehydrogenation reactions.

Branched Porous Ni3N as a Catalytic Electrode for Selective Semidehydrogenation of Tetrahydroisoquinoline

Oxygen evolution in electrochemical water splitting needs a high overpotential that significantly reduces the energy efficiency. To explore an alternative anodic reaction to promote the production of hydrogen at the other end of water splitting and at the same time to get high-value-added chemicals is highly desirable. Herein, we demonstrate a novel branched porous Ni3N catalyst that is prepared for dehydrogenation of tetrahydroisoquinoline, which acts as an anodic oxidation reaction to promote H2 formation on the other end. Interestingly, the Ni3N catalytic electrode can induce effective semidehydrogenation with the selective formation of dihydroisoquinoline, which is difficult to be obtained by the usual direct synthesis route. The catalytic electrode exhibits a low potential of 1.55 V (vs RHE) for a catalytic current density of 61 mA cm-2 with dehydrogenation of tetrahydroisoquinoline and hydrogen production. In situ Raman spectra studies suggest that NiOOH is formed on the electrode surface, which mediates the oxidation semidehydrogenation process. This work also provides a strategy to fabricate nitride materials for applications beyond selective semidehydrogenation of tetrahydroisoquinoline.

In Situ Probing the Short-Lived Intermediates in Visible-Light Heterogeneous Photocatalysis by Mass Spectrometry

Visible-light-mediated heterogeneous photocatalysis has recently emerged as an environmentally friendly and energy-sustainable alternative for organic transformations. Despite the advancements in developing wide varieties of photocatalysts during the past decades, the accurate probing and identification of the photogenerated species, especially the short-lived radical intermediates, are still challenging. In this work, we reported a hybrid ion emitter that integrated with a pico-liter heterogeneous photocatalytic reactor, which was fabricated by depositing the photocatalyst (e.g., TiO2) into the front tip of a quartz micropipette. Benefited from the dual-function feature of the hybrid micropipette (i.e., a clog-free tip-confined pico-liter reactor for heterogeneous photocatalysis and an ion emitter for nanoelectrospray ionization), sensitized photoredox reactions at the catalyst-solution interface can be triggered upon visible-light irradiation using a cheap LED laser (453 nm), and the newly produced transient radical intermediates can be rapidly transformed into gaseous ions for mass spectrometric identification. Using this novel low-delay coupling device, photogenerated intermediates, including the cationic radicals produced during the photooxidation of anilines and the anionic radicals produced during the photoreduction of quinones, were successfully captured by mass spectrometry. We believe that our hybrid photochemical microreactor/ion emitter has provided a new and powerful tool for exploring the complicated heterogeneous photochemical processes, especially their ultrafast initial transformations.

Selective Thermal and Photocatalytic Decomposition of Aqueous Hydrazine to Produce H2 over Ag-Modified TiO2 Nanomaterial

An Ag-modified TiO₂ nanomaterial was prepared by a one-pot synthesis method using tetra butyl titanate, silver nitrate, and sodium hydroxide in water at 473 K for 3 h. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used to determine the structure and morphology of the synthesized Ag-modified TiO₂ nanomaterial. The diffuse reflectance UV-visible and photoluminescence spectroscopy results revealed that metallic Ag nanoparticles decreased the optical band gap and photoluminescence intensity of the TiO₂. In addition, the Raman peak intensity and absorbance were increased after Ag modification onto TiO₂. The photocatalytic efficiency of the synthesized samples was tested for decomposition of aqueous hydrazine solution under visible light irradiation. The photocatalytic efficiency of Ag-modified TiO₂ nanomaterials was higher than that of bare TiO₂ and Ag metal NPs due to the synergistic effect between the Ag metal and TiO₂ structures. In addition, the surface plasmon resonance (SPR) electron transfer from Ag metal particles to the conduction band of TiO₂ is responsible for superior activity of TiO₂-Ag catalyst. The Ag-modified TiO₂ nanomaterials offered a 100% H₂ selectivity within 30 min of reaction time and an apparent rate constant of 0.018 min^-1 with an activation energy of 34.4 kJ/mol under visible light radiation.

Novel Sol-Gel Synthesis of TiO2 Spherical Porous Nanoparticles Assemblies with Photocatalytic Activity

For this study, the synthesis of TiO₂ nanomaterials was performed via a novel sol-gel method employing titanium butoxide as a metal precursor, Pluronic F127 as a templating agent, toluene as a swelling agent, and acidic water or ethanol as the reaction solvents. The method was designed by tailoring certain reaction parameters, such as the sequence of toluene addition, magnetic stirring, the type of reaction solvent, and the calcination conditions. Analysis of the specific surface area and porosity was carried out via N₂ physisorption, whereas the morphological features of the solids were investigated via transmission electron microscopy. The crystalline structure of both the dried powders and the calcined materials was evaluated using X-ray diffraction analysis. It transpired that the different phase compositions of the solids are related to the specific synthesis medium employed. Under the adopted reaction conditions, ethanol, which was used as a reaction solvent, promoted the local arrangement of dispersed anatase particles, the specific arrangement of which does not lead to rutile transformation. Conversely, the use of water alone supported high-particle packing, evolving into a rutile phase. The photodegradation of Rhodamine B was used as a target reaction for testing the photocatalytic activity of the selected samples.

Experimental Studies on TiO2 NT with Metal Dopants through Co-Precipitation, Sol-Gel, Hydrothermal Scheme and Corresponding Computational Molecular Evaluations

In the last decade, TiO₂ nanotubes have attracted the attention of the scientific community and industry due to their exceptional photocatalytic properties, opening a wide range of additional applications in the fields of renewable energy, sensors, supercapacitors, and the pharmaceutical industry. However, their use is limited because their band gap is tied to the visible light spectrum. Therefore, it is essential to dope them with metals to extend their physicochemical advantages. In this review, we provide a brief overview of the preparation of metal-doped TiO₂ nanotubes. We address hydrothermal and alteration methods that have been used to study the effects of different metal dopants on the structural, morphological, and optoelectrical properties of anatase and rutile nanotubes. The progress of DFT studies on the metal doping of TiO₂ nanoparticles is discussed. In addition, the traditional models and their confirmation of the results of the experiment with TiO₂ nanotubes are reviewed, as well as the use of TNT in various applications and the future prospects for its development in other fields. We focus on the comprehensive analysis and practical significance of the development of TiO₂ hybrid materials and the need for a better understanding of the structural-chemical properties of anatase TiO₂ nanotubes with metal doping for ion storage devices such as batteries.

Biocatalytic and Chemo-Enzymatic Synthesis of Quinolines and 2-Quinolones by Monoamine Oxidase (MAO-N) and Horseradish Peroxidase (HRP) Biocatalysts

The oxidative aromatization of aliphatic N-heterocycles is a fundamental organic transformation for the preparation of a diverse array of heteroaromatic compounds. Despite many attempts to improve the efficiency and practicality of this transformation, most synthetic methodologies still require toxic and expensive reagents as well as harsh conditions. Herein, we describe two enzymatic strategies for the oxidation of 1,2,3,4-tetrahydroquinolines (THQs) and N-cyclopropyl-N-alkylanilines into quinolines and 2-quinolones, respectively. Whole cells and purified monoamine oxidase (MAO-N) enzymes were used to effectively catalyze the biotransformation of THQs into the corresponding aromatic quinoline derivatives, while N-cyclopropyl-N-alkylanilines were converted into 2-quinolone compounds through a horseradish peroxidase (HRP)-catalyzed annulation/aromatization reaction followed by Fe-mediated oxidation.

Photoredox-Promoted Co-Production of Dihydroisoquinoline and H2 O2 over Defective Zn3 In2 S6

One of the most sustainable and promising approaches for hydrogen peroxide (H₂ O₂ ) production in a low-cost and environment-friendly way is photosynthesis, which, however, suffers from poor carrier utilization and low H₂ O₂ productivity. The addition of proton donors such as isopropanol or ethanol can increase H₂ O₂ production, which, unfortunately, will inevitably elevate the entire cost while wasting the oxidizing power of holes (h⁺ ). Herein, the tetrahydroisoquinolines (THIQs) is employed as a distinctive proton donor for the thermodynamically feasible and selective semi-dehydrogenation reaction to highly valuable dihydroisoquinolines (DHIQs), and meanwhile, to couple with and promote H₂ O₂ generation in one photoredox reaction under the photocatalysis by dual-functional Zn₃ In₂ S₆ photocatalyst. Surprisingly, the suitably defective Zn₃ In₂ S₆ offers an excellent and near-stoichiometric co-production performance of H₂ O₂ and DHIQs at unprecedentedly high rates of 66.4 and 62.1 mmol h^-1 g^-1 under visible light (λ ≥ 400 nm), respectively, which outperforms all the previously available reports even though sacrificial agents were employed in those reports. Additionally, photocatalytic redox reaction mechanism demonstrates that H₂ O₂ can be generated through multiple pathways, highlighting the synergistic effect among ROS (·O₂ ^- and ¹ O₂ ), h⁺ and proton donor, which has been ignored in previous studies.

Rh-Catalyzed Environmentally Benign Selective Hydrogenation of a Broad Variety of Functional Groups Using Al-Water as a Hydrogen Source

Supported rhodium catalysts were screened to catalyze the one-step hydrogenation of a broad variety of functional groups. The results show that 5% Rh/Al2O3 and 5% Rh/C performed well in controlling selective hydrogenation under the desired amount of time and temperature. In this regard, partial and full hydrogenation were achieved by controlling reaction time or temperature. In addition to aliphatic C–C, C–N, C–O, and N–O multiple bonds, the applicability of this method was demonstrated by the hydrogenation of C=C double bonds of arenes, which is considered challenging. Importantly, the Al-H2O system producing hydrogen in situ and the high, controllable selectivity make this protocol environmentally benign and highly efficient.

Medical and Dental Applications of Titania Nanoparticles: An Overview

Currently, titanium oxide (TiO₂) nanoparticles are successfully employed in human food, drugs, cosmetics, advanced medicine, and dentistry because of their non-cytotoxic, non-allergic, and bio-compatible nature when used in direct close contact with the human body. These NPs are the most versatile oxides as a result of their acceptable chemical stability, lower cost, strong oxidation properties, high refractive index, and enhanced aesthetics. These NPs are fabricated by conventional (physical and chemical) methods and the latest biological methods (biological, green, and biological derivatives), with their advantages and disadvantages in this epoch. The significance of TiO₂ NPs as a medical material includes drug delivery release, cancer therapy, orthopedic implants, biosensors, instruments, and devices, whereas their significance as a dental biomaterial involves dentifrices, oral antibacterial disinfectants, whitening agents, and adhesives. In addition, TiO₂ NPs play an important role in orthodontics (wires and brackets), endodontics (sealers and obturating materials), maxillofacial surgeries (implants and bone plates), prosthodontics (veneers, crowns, bridges, and acrylic resin dentures), and restorative dentistry (GIC and composites).

Ag@TiO2 Nanocomposite as an Efficient Catalyst for Knoevenagel Condensation

In the present study, a new series of different heterocycles was synthesized through base-free Knoevenagel condensation of various aldehydes and active methylene-containing compounds using the hydrothermal developed Ag@TiO₂ as a heterogeneous catalyst. The catalyst was synthesized by mixing TiO₂ (P25) with AgNO₃ and hydrothermally treated in ethanol at 180 °C for 12 h. The developed Ag@TiO₂ catalyst was directly applied for Knoevenagel condensation, and the optimized procedure involved stirring the aldehydes and active methylene-containing compounds with Ag@TiO₂ in ethanol at 65 °C. The reaction scope was investigated for various aromatic and heterocyclic aldehydes with active methylene-containing compounds, and the isolated yields were significantly high. The reusability of the catalyst was investigated for up to five cycles, where an insignificant decrease in the catalyst's reactivity was observed. Also, the reaction could proceed in water as a solvent, and the isolated yield was 40%. Hence, this protocol features mild reaction conditions, a facile procedure, and clean reaction profiles.

Continuous Room-Temperature Hydrogen Release from Liquid Organic Carriers in a Photocatalytic Packed-Bed Flow Reactor

Despite the potential of hydrogen (H₂ ) storage in liquid organic carriers to achieve carbon neutrality, the energy required for H₂ release and the cost of catalyst recycling have hindered its large-scale adoption. In response, a photo flow reactor packed with rhodium (Rh)/titania (TiO₂ ) photocatalyst was reported for the continuous and selective acceptorless dehydrogenation of 1,2,3,4-tetrahydroquinoline to H₂ gas and quinoline under visible light irradiation at room temperature. The tradeoff between the reactor pressure drop and its photocatalytic surface area was resolved by selective in-situ photodeposition of Rh in the photo flow reactor post-packing on the outer surface of the TiO₂ microparticles available to photon flux, thereby reducing the optimal Rh loading by 10 times compared to a batch reactor, while facilitating catalyst reuse and regeneration. An example of using quinoline as a hydrogen acceptor to lower the energy of the hydrogen production step was demonstrated via the water-gas shift reaction.

Efficient Synthesis of C3-Alkylated and Alkenylated Indoles via Manganese-Catalyzed Dehydrogenation

The catalytic dehydrogenation of alcohols is essential for the sustainable production of valuable products. This provids a new strategy for green organic synthesis in chemical industries. Herein, we describe a manganese-based catalytic system that enables the efficient synthesis of C3-alkylated indoles from benzyl alcohols and indoles via the borrowing hydrogen process. Furthermore, dehydrogenative coupling of 2-arylethanols and indoles yields C3-alkenylated indoles. Meanwhile, reacting 2-aminophenethanol instead of indoles can also obtain the corresponding indole products with high selectivity under the same conditions.

Pt-Modified Interfacial Engineering for Enhanced Photocatalytic Performance of 3D Ordered Macroporous TiO2

Narrowing the band gap and increasing the photodegradation efficiency of TiO2-based photocatalysts are very important for their wide application in environment-related fields such as photocatalytic degradation of toxic pollutants in wastewater. Herein, a three-dimensionally ordered macroporous Pt-loaded TiO2 photocatalyst (3DOM Pt/TiO2) has been successfully synthesized using a facile colloidal crystal-template method. The resultant composite combines several morphological/structural advantages, including uniform 3D ordered macroporous skeletons, high crystallinity, large porosity and an internal electric field formed at Pt/TiO2 interfaces. These unique features enable the 3DOM Pt/TiO2 to possess a large surface for photocatalytic reactions and fast diffusion for mass transfer of reactants as well as efficient suppression of recombination for photogenerated electron-hole pairs in TiO2. Thus, the 3DOM Pt/TiO2 exhibits significantly enhanced photocatalytic activity. Typically, 88% of RhB can be degraded over the 3DOM Pt/TiO2 photocatalyst under visible light irradiation (λ ≥ 420 nm) within 100 min, much higher than that of the commercial TiO2 nanoparticles (only 37%). The underlying mechanism for the enhanced photocatalytic activity of 3DOM Pt/TiO2 has been further analyzed based on energy band theory and ascribed to the formation of Schottky-type Pt/TiO2 junctions. The proposed method herein can provide new references for further improving the photocatalytic efficiency of other photocatalysts via rational structural/morphological engineering.

Visible-Light-Promoted Iridium(III)-Catalyzed Acceptorless Dehydrogenation of N-Heterocycles at Room Temperature

An effective visible-light-promoted iridium(III)-catalyzed hydrogen production from N-heterocycles is described. A single iridium complex constitutes the photocatalytic system playing a dual task, harvesting visible-light and facilitating C–H cleavage and H₂ formation at room temperature and without additives. The presence of a chelating C–N ligand combining a mesoionic carbene ligand along with an amido functionality in the Ir^III complex is essential to attain the photocatalytic transformation. Furthermore, the Ir^III complex is also an efficient catalyst for the thermal reverse process under mild conditions, positioning itself as a proficient candidate for liquid organic hydrogen carrier technologies (LOHCs). Mechanistic studies support a light-induced formation of H₂ from the Ir–H intermediate as the operating mode of the iridium complex.

Photocatalytic Aerobic Dehydrogenation of N-Heterocycles with Ir(III) Photosensitizers Bearing the 2(2'-Pyridyl)benzimidazole Scaffold

Photoredox catalysis constitutes a very powerful tool in organic synthesis, due to its versatility, efficiency, and the mild conditions required by photoinduced transformations. In this paper, we present an efficient and selective photocatalytic procedure for the aerobic oxidative dehydrogenation of partially saturated N-heterocycles to afford the respective N-heteroarenes (indoles, quinolines, acridines, and quinoxalines). The protocol involves the use of new Ir(III) biscyclometalated photocatalysts of the general formula [Ir(C^N)₂(N^N')]Cl, where the C^N ligand is 2-(2,4-difluorophenyl)pyridinate, and N^N' are different ligands based on the 2-(2'-pyridyl)benzimidazole scaffold. In-depth electrochemical and photophysical studies as well as DFT calculations have allowed us to establish structure-activity relationships, which provide insights for the rational design of efficient metal-based dyes in photocatalytic oxidation reactions. In addition, we have formulated a dual mechanism, mediated by the radical anion superoxide, for the above-mentioned transformations.

Metal-free carbocatalyst for room temperature acceptorless dehydrogenation of N-heterocycles

Catalytic dehydrogenation enables reversible hydrogen storage in liquid organics as a critical technology to achieve carbon neutrality. However, oxidant or base-free catalytic dehydrogenation at mild temperatures remains a challenge. Here, we demonstrate a metal-free carbocatalyst, nitrogen-assembly carbons (NCs), for acceptorless dehydrogenation of N-heterocycles even at ambient temperature, showing greater activity than transition metal-based catalysts. Mechanistic studies indicate that the observed catalytic activity of NCs is because of the unique closely placed graphitic nitrogens (CGNs), formed by the assembly of precursors during the carbonization process. The CGN site catalyzes the activation of C─H bonds in N-heterocycles to form labile C─H bonds on catalyst surface. The subsequent facile recombination of this surface hydrogen to desorb H₂ allows the NCs to work without any H-acceptor. With reverse transfer hydrogenation of various N-heterocycles demonstrated in this work, these NC catalysts, without precious metals, exhibit great potential for completing the cycle of hydrogen storage.

Photochemical and electrochemical regioselective cross-dehydrogenative C(sp2)–H sulfenylation and selenylation of substituted benzo[a]phenazin-5-ols

The essence of photo- and electrochemistry: sulfenylation and selenylation of substituted benzo[a]phenazin-5-ols through cross-dehydrogenative C(sp2)–H functionalization.

Hollow TiO2 Microsphere/Graphene Composite Photocatalyst for CO2 Photoreduction

In an attempt to improve the photocatalytic activity of anatase TiO2, we developed a composite photocatalyst composed of hollow TiO2 microspheres (hTS) and graphene. The hTS were prepared through a two-step hydrothermal process, where SiO2 microspheres with desirable diameters of 100–400 nm were used as sacrificial templates. Accordingly, the effect of the hTS cavity size on the activity of the catalyst in wet CO2 photoreduction (CO2PR) was studied. Furthermore, it was established that the hydrothermal pH value crucially influences the photocatalytic activity of the hTS photocatalyst, as well as its composition and microstructure. The hTS photocatalyst was also combined with graphene (0–90 wt%) to improve its photocatalytic activity. This study provides insight into the optimal microsphere diameter, hydrothermal pH value, and graphene/hTSx ratio required for designing hollow microsphere-based photocatalysts with enhanced CO2PR performances.

Recent advances in the synthesis of N-heteroarenes via catalytic dehydrogenation of N-heterocycles

Bio-active molecules having N-heteroarene core are widely used for numerous medicinal applications and as lifesaving drugs. In this direction, dehydrogenation of partially saturated aromatic N-heterocycles shows utmost importance for the synthesis of heterocycles. This feature article highlights the recent advances, from 2009 to April 2021, on the dehydrogenation of N-heteroaromatics. Notable features considering the development of newer catalysis for dehydrogenations are: (i) approaches based on precious metal catalysis, (ii) newer strategies and catalyst development technology using non-precious metal-catalysts for N-heterocycles having one or more heteroatoms, (iii) Synthesis of five or six-membered N-heterocycles using photocatalysis, electrocatalytic, and organo-catalytic approaches using different homogeneous and heterogeneous conditions' (iv) metal free (base and acid-promoted) dehydrogenation along with I₂, N-hydroxyphthalimide (NHPI) and bio catalyzed miscellaneous examples have also been discussed, (v) mechanistic studies for various dehydrogenation reactions and (vi) synthetic applications of various bio-active molecules including post-drug derivatization are discussed.

First-Row Transition-Metal Catalyzed Acceptorless Dehydrogenation and Related Reactions: A Personal Account

The development of sustainable catalytic protocols that circumvent the use of expensive and precious metal catalysts and avoid toxic reagents plays a crucial role in organic synthesis. Indeed, the direct employment of simple and abundantly available feedstock chemicals as the starting materials broadens their synthetic application in contemporary research. In particular, the transition metal-catalyzed diversification of alcohols with various nucleophilic partners to construct a wide range of building blocks is a powerful and highly desirable methodology. Moreover, the replacement of precious metal catalysts by non-precious and less toxic metals for selective transformations is one of the main goals and has been paid significant attention to in modern chemistry. In view of this, the first-row transition metal catalysts find extensive applications in various synthetic transformations such as catalytic hydrogenation, dehydrogenation, and related reactions. Herein, we have disclosed our recent developments on the base-metal catalysis such as Mn, Fe, Co, and Ni for the acceptorless dehydrogenation reactions and its application in the C-C and C-N bond formation via hydrogen auto-transfer (HA) and acceptorless dehydrogenation coupling (ADC) reactions. These HA/ADC protocols employ alcohol as alkylating agents and eliminate water and/or hydrogen gas as by-products, representing highly atom-efficient and environmentally benign reactions. Furthermore, diverse simple to complex organic molecules synthesis by C-C and C-N bond formation using feedstock alcohols are also overviewed. Overall, this account deals with the contribution and development of efficient and novel homogeneous as well as heterogeneous base-metal catalysts for sustainable chemical synthesis.

Accelerating H2 Evolution by Anodic Semi-dehydrogenation of Tetrahydroisoquinolines in Water over Co3 O4 Nanoribbon Arrays Decorated Nickel Foam

Coupling the H₂ evolution reaction in water with thermodynamically favorable organic oxidation reactions is highly desirable, because it can enhance the energy conversion efficiency compared with electrocatalytic water splitting, and produce value-added chemicals instead of O₂ in the anodic reaction. Herein, Co₃ O₄ nanoribbon arrays in situ grown on nickel foam (Co₃ O₄ @NF) was employed as an effective electrocatalyst for the selective oxidation of tetrahydroisoquinolines (THIQs). Various value-added semi-dehydrogenation products including dihydroisoquinolines with electro-deficient or -rich groups could be obtained with moderate yields and faradaic efficiencies. Benefitting from the rich surface active sites of Co₃ O₄ @NF, a two-electrode (Co₃ O₄ @NF||Pt) electrolytic system drove a benchmark current density of 10 mA cm^-2 at a cell voltage as low as 1.446 V in 1.0 M KOH aqueous solution containing 0.02 M THIQ, which was reduced by 174 mV in comparison with that of overall water splitting.

Discrepancy between Proline and Homoproline in Chiral Recognition and Diastereomeric Photoreactivity with Iridium(III) Complexes

The chiral-recognition processes of homoproline (hpro) and [Ir(pq)₂(MeCN)₂](PF₆) (pq is 2-phenylquinoline; MeCN is acetonitrile) are investigated, in favor of formation of the thermodynamically stable diastereomers Λ-[Ir(pq)₂(d-hpro)] and Δ-[Ir(pq)₂(l-hpro)]. Moreover, the diastereoselective photoreactions of Δ-[Ir(pq)₂(d-hpro)] and Δ-[Ir(pq)₂(l-hpro)] are reported in the presence of O₂ at room temperature. Diastereomer Δ-[Ir(pq)₂(l-hpro)] is dehydrogenatively oxidized into imino acid complex Δ-[Ir(pq)₂(hpro-2H²)] (hpro-2H² is 3,4,5,6-tetrahydropicalinate), while diastereomer Δ-[Ir(pq)₂(d-hpro)] occurs by interligand C-N cross-coupling and dehydrogenative oxidation reactions, affording three products: Δ-[Ir(pq)(d-pqh)] [pqh is N-(2-phenylquinolin-8-yl)homoproline], Δ-[Ir(pq)₂(hpro-2H²)], and Δ-[Ir(pq)₂(d-hpro-2H⁶)] [hpro-2H⁶ is 2,3,4,5-tetrahydropicalinate]. The C-N cross-coupling and dehydrogenative oxidation reactions are competitive, and the dehydrogenative oxidation reactions are regioselective. By optimization of the photoreaction parameters such as the diastereomeric substrate, solvent, and temperature as well as base, each possible competitive product is selectively controlled. In addition, density functional theory calculations are performed to elucidate the distinctly chiral recognition between proline and hpro with an iridium(III) complex.

Efficient acceptorless dehydrogenation of hydrogen-rich N-heterocycles photocatalyzed by Ni(OH)2@CdSe/CdS quantum dots

Ni(OH)₂@CdSe/CdS QDs exhibit excellent photocatalytic acceptorless dehydrogenation of hydrogen-rich N-heterocycles with the release of hydrogen at ambient temperature.

Visible-light-mediated synthesis of quinolines

Visible light promoted synthetic routes of quinolines using different strategies are hereby documented.

An effective strategy for hydrogen supply: catalytic acceptorless dehydrogenation of N-heterocycles

Catalytic acceptorless dehydrogenation of N-heterocycles will offer great hope to solve numerous existing complex scientific and technological problems with simple, efficient, stable and controllable energy output, especially facilitating development in the field of PEMFC.

One-pot photocatalytic transformation of indolines into 3-thiocyanate indoles with new Ir(iii) photosensitizers bearing β-carbolines

Herein, we harness the combination of two photocatalytic reactions, promoted by new Ir(iii) photosensitizers, for the direct access to 3-thiocyanato indoles from indolines in a one-pot process.

Visible-Light Acceleration of H2 Evolution from Aqueous Solutions of Inorganic Hydrides Catalyzed by Gold-Transition-Metal Nanoalloys

Production of hydrogen (H₂) upon hydrolysis of inorganic hydrides potentially is a key step in green energy production. We find that visible-light irradiation of aqueous solutions of ammonia-borane (AB) or NaBH₄ containing "click"-dendrimer-stabilized alloyed nanocatalysts composed of nanogold and another late transition-metal nanoparticle (LTMNP) highly enhances catalytic activity for H₂ generation while also inducing alloy to Au core@M shell nanocatalyst restructuration. In terms of visible-light-induced acceleration of H₂ production from both AB and NaBH₄, the Au₁Ru₁ alloy catalysts show the most significant light-boosting effect. Au-Rh and Au-PtNPs are also remarkable with total H₂ release time from AB and NaBH₄ down to 1.3 min at 25 °C (AuRh), 3 times less than in the dark, and Co is the best earth-abundant metal alloyed with nanogold. This boosting effect is explained by the transfer of plasmon-induced hot electron from the Au atoms to the LTMNP atoms facilitating water O-H oxidative addition on the LTMNP surface, as shown by the large primary kinetic isotope effect k_H/k_D upon using D₂O obtained for both AB and NaBH₄. The second simultaneous and progressive effect of visible-light irradiation during these reactions, alloy to Au core@M shell restructuration, enhances the catalytic activity in the recycling, because, in the resulting Au core@M shell, the surface metal (such as Ru) is much more active than the original Au-containing alloy surface in dark reactions. There is no light effect on the rate of hydrogen production for the recycled nanocatalyst because of the absence of Au on the NP surface, but it is still very efficient in hydrogen release during four cycles because of the initial light-induced restructuration, although it is slightly less efficient than the original nanoalloy in the presence of light. The dendritic triazole coordination on each LTMNP surface appears to play a key role in these remarkable light-induced processes.

Rice Crust-Like ZnO/Ti3C2Tx MXene Hybrid Structures for Improved Photocatalytic Activity

Novel two-dimensional ZnO/Ti3C2Tx hybrid photocatalysts with modified surface areas were prepared using a simple calcination technique. The microstructures, crystalline features, and bonding states of the ZnO structure-covered Ti3C2Tx MXenes were closely characterized using various tools. The photoluminescence intensity of the hybrid photocatalyst was greatly reduced compared to the pristine ZnO, while its Brunauer-Emmett-Teller (BET) surface area increased by more than 100 times. Under solar light illumination, the photocatalytic degradation efficiency of the hybrid photocatalyst for organic pollutants (MO, RhB) appeared to be three-fold larger as compared to pristine ZnO. The superb photocatalytic performance of the photocatalyst was attributed to several factors, such as ideal band alignment, Schottky barrier formation, and large surface area. Moreover, the ZnO/Ti3C2Tx hybrid photocatalyst showed excellent cycling stability. These results suggest that the novel hybrid structure may be a potential candidate for removing organic pollutants in wastewater.