Enhancing Bifunctional Electrocatalytic Activities via Metal d-Band Center Lift Induced by Oxygen Vacancy on the Subsurface of Perovskites

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Facile Deficiency Engineering in a Cobalt-Free Perovskite Air Electrode to Achieve Enhanced Performance for Protonic Ceramic Fuel Cells

As a crucial component responsible for the oxygen reduction reaction (ORR), cobalt-rich perovskite-type cathode materials have been extensively investigated in protonic ceramic fuel cell (PCFC). However, their widespread application at a commercial scale is considerably hindered by the high cost and inadequate stability. In response to these weaknesses, the study presents a novel cobalt-free perovskite oxide, Ba0.95La0.05(Fe0.8Zn0.2)0.95O3-δ (BLFZ0.95), with the triple-conducting (H+|O2-|e-) property as an active and robust air electrode for PCFC. The B-site deficiency state contributes significantly to the optimization of crystal and electronic structure, as well as the increase in oxygen vacancy concentration, thus in turn favoring the catalytic capacity. As a result, the as-obtained BLFZ0.95 electrode demonstrates exceptional electrochemical performance at 700 °C, representing extremely low area-specific resistance of 0.04 Ω cm2 in humid air (3 vol.% H2O), extraordinarily high peak power density of 1114 mW cm-2, and improved resistance against CO2 poisoning. Furthermore, the outstanding long-term durability is achieved without visible deterioration in both symmetrical and single cell modes. This study presents a simple but crucial case for rational design of cobalt-free perovskite cathode materials with appreciable performance via B-site deficiency regulation.

Strategic Design and Insights into Lanthanum and Strontium Perovskite Oxides for Oxygen Reduction and Oxygen Evolution Reactions

Perovskite oxides exhibit bifunctional activity for both oxygen reduction (ORR) and oxygen evolution reactions (OER), making them prime candidates for energy conversion in applications like fuel cells and metal-air batteries. Their intrinsic catalytic prowess, combined with low-cost, abundance, and diversity, positions them as compelling alternatives to noble metal and metal oxides catalysts. This review encapsulates the nuances of perovskite oxide structures and synthesis techniques, providing insight into pivotal active sites that underscore their bifunctional behavior. The focus centers on the breakthroughs surrounding lanthanum (La) and strontium (Sr)-based perovskite oxides, specifically their roles in zinc-air batteries (ZABs). An introduction to the mechanisms of ORR and OER is provided. Moreover, the light is shed on strategies and determinants central to optimizing the bifunctional performance of La and Sr-based perovskite oxides.

Bimetallic Organic Frameworks via In Situ Solvothermal Sol-Gel-Crystal and Sol-Crystal Transformation as Durable Electrocatalysts for Oxygen Reduction Reaction

The in situ solvothermal conversion of metal-organic gels (MOGs) to crystalline metal-organic frameworks (MOFs) represents a versatile and ingenious strategy that has been employed for the synthesis of MOF materials with specific morphologies, high yield, and improved functional properties. Herein, we have adopted an in situ solvothermal conversion of bimetallic MOGs to crystalline bimetallic MOFs with the aim of introducing a redox-active metal heterogeneity into the monometallic counterpart. The formation of bimetallic NiZn-MOF and CoZn-MOF via in situ solvothermal sol-gel-crystal and sol-crystal transformation is found to depend on the solvent systems used. The sol-to-gel-to-crystal transformation of NiZn-MOF via the formation of NiZn-MOG is found to occur through the gradual disruption of gel fibers leading to subsequent formation of microcrystals and single crystals of NiZn-MOF. These bimetallic MOFs and MOGs serve as promising electrocatalysts for oxygen reduction reaction (ORR) with an excellent methanol tolerance property, which can be attributed to the enhanced mass and charge transfer, higher oxygen vacancies, and bimetallic synergistic interactions among the heterometals. This work demonstrates a convenient strategy for producing bimetallic MOGs to MOFs through the introduction of a redox-active metal heterogeneity in the inorganic hybrid functional materials for fundamental and applied research. Our results connect MOGs and MOFs which have been regarded as having opposite physical states, that is, soft vs hard, and provide promising structural correlation between MOGs and MOFs at the molecular level.

Tailoring Oxygen Reduction Reaction Kinetics on Perovskite Oxides via Oxygen Vacancies for Low-Temperature and Knittable Zinc-Air Batteries

High kinetics oxygen reduction reaction (ORR) electrocatalysts under low temperature are critical and highly desired for temperature-tolerant energy conversion and storage devices, but remain insufficiently investigated. Herein, oxygen vacancy-rich porous perovskite oxide (CaMnO3 ) nanofibers coated with reduced graphene oxide coating (V-CMO/rGO) are developed as the air electrode catalyst for low-temperature and knittable Zn-air batteries. V-CMO/rGO exhibits top-level ORR activity among perovskite oxides and shows impressive kinetics under low temperature. Experimental and theoretical calculation results reveal that the synergistic effect between metal atoms and oxygen vacancies, as well as the accelerated kinetics and enhanced electric conductivity and mass transfer over the rGO coated nanofiber 3D network contribute to the enhanced catalytic activity. The desorption of ORR intermediate is promoted by the regulated electron filling. The V-CMO/rGO drives knittable and flexible Zn-air batteries under a low temperature of -40 °C with high peak power density of 56 mW cm-2 and long cycle life of over 80 h. This study provides insight of kinetically active catalyst and facilitates the ZABs application in harsh environment.

Synergistic Effect of Oxygen Vacancy-Rich SnO2 and AgCl in the Augmentation of Sustained Oxygen Reduction Reaction

Developing a stable and methanol-tolerant electrocatalyst for a sustained oxygen reduction reaction (ORR) is of great importance for advancing direct methanol fuel cell applications. The silver-based electrocatalysts are particularly interesting among the promising non-Pt-based electrocatalysts for ORR. Herein, we report a single-step synthesis of a composite of AgCl and SnO2 with oxygen vacancy (AgCl-SnO2(VO)), which exhibits sustained and selective catalytic activity for the ORR along with excellent durability. Hydrothermal synthesis generates oxygen vacancies within the material and facilitates a strong interaction between AgCl and SnO2(VO), which effectively augments the ORR activity and the long-term stability of the composite. The composite exhibits remarkable methanol tolerance, as evidenced by a meager shift of only 0.002 V in the half-wave potential. Furthermore, the composite demonstrates excellent durability, with no noticeable changes in onset and half-wave potential even after 2500 cycles. The cost-effectiveness, durability, and ORR selectivity of this composite hold great promise toward contributing to the advancement of clean energy technology.

Recent advances in developing multiscale descriptor approach for the design of oxygen redox electrocatalysts

Oxygen redox electrocatalysis is the crucial electrode reaction among new-era energy sources. The prerequisite to rationally design an ideal electrocatalyst is accurately identifying the structure-activity relationship based on the so-called descriptors which link the catalytic performance with structural properties. However, the quick discovery of those descriptors remains challenging. In recent, the high-throughput computing and machine learning methods were identified to present great prospects for accelerating the screening of descriptors. That new research paradigm improves cognition in the way of oxygen evolution reaction/oxygen reduction reaction activity descriptor and reinforces the understanding of intrinsic physical and chemical features in the electrocatalytic process from a multiscale perspective. This review summarizes those new research paradigms for screening multiscale descriptors, especially from atomic scale to cluster mesoscale and bulk macroscale. The development of descriptors from traditional intermediate to eigen feature parameters has been addressed which provides guidance for the intelligent design of new energy materials.

Co3O4 with upshifted d-band center and enlarged specific surface area by single-atom Zr doping for enhanced PMS activation

In this work, single-atom Zr doping is demonstrated to be an effective strategy to enhance the catalytic performance of Co₃O₄ toward peroxymonosulfate (PMS) by modulating electronic structure and enlarging specific surface simultaneously. The d-band center of Co sites upshifts owing to different electronegativity of Co and Zr in the bonds of Co-O-Zr confirmed by density functional theory calculations, leading to enhanced adsorption energy of PMS and strengthened electron transfer from Co^(II) to PMS. The specific surface area of Zr-doped Co₃O₄ increases by 6 times due to the decrease of crystalline size. Consequently, the kinetic constant of phenol degradation with Zr-Co₃O₄ is 10 times higher than that with Co₃O₄ (0.31 vs. 0.029 min^-1). The relative surface specific kinetic constant of Zr-Co₃O₄ for phenol degradation is still 2.29 times higher than that of Co₃O₄ (0.00660 vs. 0.00286 g m^-2 min^-1). In addition, the potential practical applicability of 8Zr-Co₃O₄ was also confirmed by practical wastewater treatment. This study provides deep insights into modifying electronic structure and enlarging specific surface area to enhance the catalytic performance.

Alkylamine-Confined Thickness-Tunable Synthesis of Co(OH)2-CoO Nanosheets toward Oxygen Evolution Catalysis

Thickness regulation of transition metal hydroxides/oxides nanosheets with superior catalytic properties represents a promising strategy to enhance catalytic performance, but it remains an enormous challenge to achieve precise control, especially when it comes to the ultrathin limit (several atomic layers). In this work, a facile strategy of alkylamine-confined growth is proposed for the synthesis of thickness-tunable metal hydroxide/oxide nanosheets. Specifically, ultrathin cobalt hydroxide and cobaltous oxide hybrid (Co(OH)₂-CoO) nanosheets (Co-O NSs) with a thickness in the range of 2-6 nm (5-13 atomic layers) are synthesized by using alkylamines with different carbon chain lengths as the ligand to modulate vertical coordination ability. Co-O NSs with a thickness of 2 nm (Co-O NSs-2 nm) exhibit excellent oxygen evolution reaction (OER) performance with an overpotential of 278 mV at 10 mA/cm². The maximized number of active sites including oxygen vacancies, optimal adsorption strength, and the highest electrical conductivity are considered as the potential factors contributing to the excellent OER performance of Co-O NSs-2 nm. This work holds great significance for the precise thickness-tunable synthesis of transition metal layered hydroxide nanosheets with modulated and improved catalytic performance.

Optimizing d-Orbital Electronic Configuration via Metal-Metal Oxide Core-Shell Charge Donation for Boosting Reversible Oxygen Electrocatalysis

Tuning the d-orbital electronic configuration of active sites to achieve well-optimized adsorption strength of oxygen-containing intermediates toward reversible oxygen electrocatalysis is desirable for efficient rechargeable Zn-Air batteries but extremely challenging. Herein, this work proposes to construct a Co@Co₃ O₄ core-shell structure to regulate the d-orbital electronic configuration of Co₃ O₄ for the enhanced bifunctional oxygen electrocatalysis. Theoretical calculations first evidence that electron donation from Co core to Co₃ O₄ shell could downshift the d-band center and simultaneously weak spin state of Co₃ O₄ , result in the well-optimized adsorption strength of oxygen-containing intermediates on Co₃ O₄ , thus contributing a favor way for oxygen reduction/evolution reaction (ORR/OER) bifunctional catalysis. As a proof-of-concept, the Co@Co₃ O₄ embedded in Co, N co-doped porous carbon derived from thickness controlled 2D metal-organic-framework is designed to realize the structure of computational prediction and further improve the performance. The optimized 15Co@Co₃ O₄ /PNC catalyst exhibits the superior bifunctional oxygen electrocatalytic activity with a small potential gap of 0.69 V and a peak power density of 158.5 mW cm^-2 in ZABs. Moreover, DFT calculations shows that the more oxygen vacancies on Co₃ O₄ contribute too strong adsorption of oxygen intermediates which limit the bifunctional electrocatalysis, while electron donation in the core-shell structure can alleviate the negative effect and maintain superior bifunctional overpotential.

Synergistic Effect in a Metal-Organic Framework Boosting the Electrochemical CO2 Overall Splitting

It is a very important but still challenging task to develop bifunctional electrocatalysts for highly efficient CO₂ overall splitting. Herein, we report a stable metal-organic framework (denoted as PcNi-Co-O), composed of (2,3,9,10,16,17,23,24-octahydroxyphthalocyaninato)nickel(II) (PcNi-(O^-)₈) ligands and the planar CoO₄ nodes, for CO₂ overall splitting. When working as both cathode and anode catalysts (i.e., PcNi-Co-O||PcNi-Co-O), PcNi-Co-O achieved a commercial-scale current density of 123 mA cm^-2 (much higher than the reported values (0.2-12 mA cm^-2)) with a Faradic efficiency (CO) of 98% at a low cell voltage of 4.4 V. Mechanism studies suggested the synergistic effects between two active sites, namely, (i) electron transfer from CoO₄ to PcNi sites under electric fields, resulting in the raised oxidizability/reducibility of CoO₄/PcNi sites, respectively; (ii) the energy-level matching of cathode and anode catalysts can reduce the energy barrier of electron transfer between them and improve the performance of CO₂ overall splitting.

Probing Dynamic Self-Reconstruction on Perovskite Fluorides toward Ultrafast Oxygen Evolution

Exploring low cost, highly active, and durable electrocatalysts for oxygen evolution reaction (OER) is of prime importance to boost energy conversion efficiency. Perovskite fluorides are emerging as alternative electrocatalysts for OER, however, their intrinsically active sites during real operation are still elusive. Herein, the self-reconstruction on newly designed NiFe coupled perovskite fluorides during OER process is demonstrated. In situ Raman spectroscopy, ex situ X-ray absorption spectroscopy, and theoretical calculation reveal that Fe incorporation can significantly activate the self-reconstruction of perovskite fluorides and efficiently lower the energy barrier of OER. Benefiting from self-reconstruction and low energy barrier, the KNi_0.8 Fe_0.2 F₃ @nickel foam (KNFF2@NF) electrocatalyst delivers an ultralow overpotential of 258 mV to afford 100 mA cm^-2 and an excellent durability for 100 h, favorably rivaling most the state-of-the-art OER electrocatalysts. This protocol provides the fundamental understanding on OER mechanism associated with surface reconstruction for perovskite fluorides.

Yttrium-based Double Perovskite Nanorods for Electrocatalysis

Herein, we investigate the effect of the chemical composition of double perovskite nanorods on their versatile electrocatalytic activity not only as supports for the oxidation of small organic molecules but also as catalysts for the oxygen evolution reaction. Specifically, Y₂CoMnO₆ and Y₂NiMnO₆ nanorods with average diameters of 300 nm were prepared by a two-step hydrothermal method, in which the individual effects of synthetic parameters, such as the pH, annealing temperature, and precursor ratios on both the composition and morphology, were systematically investigated. When used as supports for Pt nanoparticles, Y₂CoMnO₆/Pt catalysts exhibited an electrocatalytic activity for the methanol oxidation reaction, which is 2.1 and 1.3 times higher than that measured for commercial Pt/C and Y₂NiMnO₆/Pt, respectively. Similarly, the Co-based catalyst support material displayed an ethanol oxidation activity, which is 2.3 times higher than both Pt/C and Y₂NiMnO₆/Pt. This clear enhancement in the activity for Y₂CoMnO₆ can largely be attributed to strong metal-support interactions, as evidenced by a downshift in the binding energy of the Pt 4f bands, measured by X-ray photoelectron spectroscopy (XPS), which is often correlated not only with a downshift in the d-band center but also to a decreased adsorption of poisoning adsorbates. Moreover, when used as catalysts for the oxygen evolution reaction, Y₂CoMnO₆ displayed a much greater activity as compared with Y₂NiMnO₆. This behavior can largely be attributed not only to a preponderance of comparatively more favorable oxidation states and electronic configurations but also to the formation of an active layer on the surface of the Y₂CoMnO₆ catalyst, which collectively gives rise to improved performance metrics and greater stability as compared with both IrO₂ and Y₂NiMnO₆. Overall, these results highlight the importance of both the chemical composition and the electronic structure of double perovskites, especially when utilized in multifunctional roles as either supports or catalysts.

Trends in Surface Oxygen Formation Energy in Perovskite Oxides

Perovskite oxides comprise an important class of materials, and some of their applications depend on the surface reactivity characteristics. We calculated, using density functional theory, the surface O vacancy formation energy (E _Ovac) for perovskite-structure oxides, with a transition metal (Ti-Fe) as the B-site cation, to estimate the catalytic reactivity of perovskite oxides. The E _Ovac value correlated well with the band gap and bulk formation energy, which is a trend also found in other oxides. A low E _Ovac value, which is expected to result in higher catalytic activity via the Mars-van Krevelen mechanism, was found in metallic perovskites such as CaCoO₃, BaFeO₃, and SrFeO₃. On the other hand, titanates had high E _Ovac values, typically exceeding 4 eV/atom, suggesting that these materials are less reactive when O vacancy formation is involved in the reaction mechanism.

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Hydrogen is considered a promising clean energy vector with the features of high energy capacity and zero-carbon emission. Water splitting is an environment-friendly and effective route for producing high-purity hydrogen, which contains two important half-cell reactions, namely, the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). At the heart of water splitting is high-performance electrocatalysts that efficiently improve the rate and selectivity of key chemical reactions. Recently, perovskite oxides have emerged as promising candidates for efficient water splitting electrocatalysts owing to their low cost, high electrochemical stability, and compositional and structural flexibility allowing for the achievement of high intrinsic electrocatalytic activity. In this review, we summarize the present research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting. The emphasis is on the innovative synthesis strategies and a deeper understanding of structure–activity relationships through a combination of systematic characterization and theoretical research. Finally, the main challenges and prospects for the further development of more efficient electrocatalysts based on perovskite oxides are proposed. It is expected to give guidance for the development of novel non-noble metal catalysts in electrochemical water splitting.

Trimetallic Sulfide Hollow Superstructures with Engineered d-Band Center for Oxygen Reduction to Hydrogen Peroxide in Alkaline Solution

High-performance transition metal chalcogenides (TMCs) as electrocatalysts for two-electron oxygen reduction reaction (2e-ORR) in alkaline medium are promising for hydrogen peroxide (H₂ O₂ ) production, but their synthesis remains challenging. In this work, a titanium-doped zinc-cobalt sulfide hollow superstructure (Ti-ZnCoS HSS) is rationally designed as an efficient electrocatalyst for H₂ O₂ electrosynthesis. Synthesized by using hybrid metal-organic frameworks (MOFs) as precursors after sulfidation treatment, the resultant Ti-ZnCoS HSS exhibits a hollow-on-hollow superstructure with small nanocages assembled around a large cake-like cavity. Both experimental and simulation results demonstrate that the polymetallic composition tailors the d-band center and binding energy with oxygen species. Moreover, the hollow superstructure provides abundant active sites and promotes mass and electron transfer. The synergistic d-band center and superstructure engineering at both atomic and nanoscale levels lead to the remarkable 2e-ORR performance of Ti-ZnCoS HSS with a high selectivity of 98%, activity (potential at 1 mA cm^-2 of 0.774 V vs reversible hydrogen electrode (RHE)), a H₂ O₂ production rate of 675 mmol h^-1 g_cat ^-1 , and long-term stability in alkaline condition, among the best 2e-ORR electrocatalysts reported to date. This strategy paves the way toward the rational design of polymetallic TMCs as advanced 2e-ORR catalysts.

Modulating Built-In Electric Field via Variable Oxygen Affinity for Robust Hydrogen Evolution Reaction in Neutral Media

Work function strongly impacts the surficial charge distribution, especially for metal-support electrocatalysts when a built-in electric field (BEF) is constructed. Therefore, studying the correlation between work function and BEF is crucial for understanding the intrinsic reaction mechanism. Herein, we present a Pt@CoO_x electrocatalyst with a large work function difference (ΔΦ) and strong BEF, which shows outstanding hydrogen evolution activity in a neutral medium with a 4.5-fold mass activity higher than 20 % Pt/C. Both experimental and theoretical results confirm the interfacial charge redistribution induced by the strong BEF, thus subtly optimizing hydrogen and hydroxide adsorption energy. This work not only provides fresh insights into the neutral hydrogen evolution mechanism but also proposes new design principles toward efficient electrocatalysts for hydrogen production in a neutral medium.

Novel Fe2.55Sb2 alloy nanoparticles incorporated in N-doped carbon as a bifunctional oxygen electrocatalyst for rechargeable Zn–air batteries

Novel Fe2.55Sb2 alloy nanoparticles are incorporated in N-doped carbon as bifunctional oxygen electrocatalyst for rechargeable Zn-air battery.

In Situ Defect Engineering Route to Optimize the Cationic Redox Activity of Layered Double Hydroxide Nanosheet via Strong Electronic Coupling with Holey Substrate

A defect engineering of inorganic solids garners great deal of research activities because of its high efficacy to optimize diverse energy-related functionalities of nanostructured materials. In this study, a novel in situ defect engineering route to maximize electrocatalytic redox activity of inorganic nanosheet is developed by using holey nanostructured substrate with strong interfacial electronic coupling. Density functional theory calculations and in situ spectroscopic analyses confirm that efficient interfacial charge transfer takes place between holey TiN and Ni-Fe-layered double hydroxide (LDH), leading to the feedback formation of nitrogen vacancies and a maximization of cation redox activity. The holey TiN-LDH nanohybrid is found to exhibit a superior functionality as an oxygen electrocatalyst and electrode for Li-O2 batteries compared to its non-holey homologues. The great impact of hybridization-driven vacancy introduction on the electrochemical performance originates from an efficient electrochemical activation of both Fe and Ni ions during electrocatalytic process, a reinforcement of interfacial electronic coupling, an increase in electrochemical active sites, and an improvement in electrocatalysis/charge-transfer kinetics.

Cation-Tuning Induced d-Band Center Modulation on Co-based Spinel Oxide for Rechargeable Zn-Air Batteries

Atomic substitutions at the tetrahedral site (A Td ) could theoretically achieve an efficient optimization of the charge at the octahedral site (B Oh ) through the A Td -O-B Oh interactions in the spinel oxides (AB2O4). However, the precise control and adjustment of the spinel oxides are still challenging owing to the complexity of their crystal structure. In this work, we demonstrate a simple solvent method to tailor the structures of spinel oxides and further use the spinel oxide composites (ACo2O4/NCNTs, A = Mn, Co, Ni, Cu, Zn) for oxygen electrocatalysis. And the optimized MnCo2O4/NCNTs exhibit high activity and excellent durability for oxygen reduction/evolution reactions. Remarkably, the rechargeable liquid Zn-air battery equipped the MnCo2O4/NCNTs cathode affords a specific capacity of 827 mAh gZn-1 with high power density of 74.63 mW cm-2 and no voltage degradation after 300 cycles at a high charging-discharging rate (5 mA cm-2). The density functional theory (DFT) calculations reveal that the substitution could regulate the ratio of Co3+/Co2+ and thereby lead to the electronic structure modulated accompanied with the movement of d-band center. The tetrahedral and octahedral sites interact through the Mn-O-Co, the Co3+ Oh of MnCo2O4 with the optimal charge structure allows more suitable binding interaction between the active center and the oxygenated species, resulting in superior oxygen electrocatalytic performance. This work not only proves the influence of the charge modulation mechanism on the oxygen catalysis process but also provides novel strategies for the subsequent design of other oxygen catalysis materials.

Design principles of noble metal-free electrocatalysts for hydrogen production in alkaline media: combining theory and experiment

Water electrolysis is a promising solution to convert renewable energy sources to hydrogen as a high-energy-density energy carrier. Although alkaline conditions extend the scope of electrocatalysts beyond precious metal-based materials to earth-abundant materials, the sluggish kinetics of cathodic and anodic reactions (hydrogen and oxygen evolution reactions, respectively) impede the development of practical electrocatalysts that do not use precious metals. This review discusses the rational design of efficient electrocatalysts by exploiting the understanding of alkaline hydrogen evolution reaction and oxygen evolution reaction mechanisms and of the electron structure-activity relationship, as achieved by combining experimental and computational approaches. The enhancement of water splitting not only deals with intrinsic catalytic activity but also includes the aspect of electrical conductivity and stability. Future perspectives to increase the synergy between theory and experiment are also proposed.

Symbolic Transformer Accelerating Machine Learning Screening of Hydrogen and Deuterium Evolution Reaction Catalysts in MA2Z4 Materials

Two-dimensional (2D) materials have been developed into various catalysts with high performance, but employing them for developing highly stable and active nonprecious hydrogen evolution reaction (HER) catalysts still encounters many challenges. To this end, the machine learning (ML) screening of HER catalysts is accelerated by using genetic programming (GP) of symbolic transformers for various typical 2D MA₂Z₄ materials. The values of the Gibbs free energy of hydrogen adsorption (ΔG_H*) are accurately and rapidly predicted via extreme gradient boosting regression by using only simple GP-processed elemental features, with a low predictive root-mean-square error of 0.14 eV. With the analysis of ML and density functional theory (DFT) methods, it is found that various electronic structural properties of metal atoms and the p-band center of surface atoms play a crucial role in regulating the HER performance. Based on these findings, NbSi₂N₄ and VSi₂N₄ are discovered to be active catalysts with thermodynamical and dynamical stability as ΔG_H* approaches to zero (-0.041 and 0.024 eV). In addition, DFT calculations reveal that these catalysts also exhibit good deuterium evolution reaction (DER) performance. Overall, a multistep workflow is developed through ML models combined with DFT calculations for efficiently screening the potential HER and DER catalysts from 2D materials with the same crystal prototype, which is believed to have significant contribution to catalyst design and fabrication.

Enhancing the Intrinsic Activity and Stability of Perovskite Cobaltite at Elevated Temperature Through Surface Stress

Perovskite-based oxides attract great attention as catalysts for energy and environmental devices. Nanostructure engineering is demonstrated as an effective approach for improving the catalytic activity of the materials. The mechanism for the enhancement, nevertheless, is still not fully understood. In this study, it is demonstrated that compressive strain can be introduced into freestanding perovskite cobaltite La_0.8 Sr_0.2 CoO_{3- δ} (LSC) nanofibers with sufficient small size. Crystal structure analysis suggests that the LSC fiber is characterized by compressive strain along the ab plane and less distorted CoO₆ octahedron compared to the bulk powder sample. Accompanied by such structural changes, the nanofiber shows significantly higher oxygen reduction reaction (ORR) activity and better stability at elevated temperature, which is attributed to the higher oxygen vacancy concentration and suppressed Sr segregation in the LSC nanofibers. First-principle calculations further suggest that the compressive strain in LSC nanofibers effectively shortens the distance between the Co 3d and O 2p band center and lowers the oxygen vacancy formation energy. The results clarify the critical role of surface stress in determining the intrinsic activity of perovskite oxide nanomaterials. The results of this work can help guide the design of highly active and durable perovskite catalysts via nanostructure engineering.

Factors determining surface oxygen vacancy formation energy in ternary spinel structure oxides with zinc

Spinel oxides are an important class of materials for heterogeneous catalysis including photocatalysis and electrocatalysis. The surface O vacancy formation energy (E_Ovac) is a critical quantity for catalyst performance because the surface of metal oxide catalysts often acts as a reaction site, for example, in the Mars-van Krevelen mechanism. However, experimental evaluation of E_Ovac is very challenging. We obtained the E_Ovac for (100), (110), and (111) surfaces of normal zinc-based spinel oxides ZnAl₂O₄, ZnGa₂O₄, ZnIn₂O₄, ZnV₂O₄, ZnCr₂O₄, ZnMn₂O₄, ZnFe₂O₄, and ZnCo₂O₄. The most stable surface is (100) for all compounds. The smallest E_Ovac for a surface is the largest in the (100) surface except for ZnCo₂O₄. For (100) and (110) surfaces, there is a good correlation, over all spinels, between the smallest E_Ovac for the surface and bulk formation energy, while the ionization potential correlates well in (111) surfaces. Machine learning over E_Ovac of all surface sites in all orientations and for all compounds to find the important factors, or descriptors, that decide the E_Ovac revealed that bulk and surface-dependent descriptors are the most important, namely the bulk formation energy, a Boolean descriptor of whether the surface is (111) or not, and the ionization potential, followed by geometrical descriptors that are different in each O site.

Impact of Surface Defects on LaNiO3 Perovskite Electrocatalysts for the Oxygen Evolution Reaction

Perovskite oxides are regarded as promising electrocatalysts for water splitting due to their cost-effectiveness, high efficiency and durability in the oxygen evolution reaction (OER). Despite these advantages, a fundamental understanding of how critical structural parameters of perovskite electrocatalysts influence their activity and stability is lacking. Here, we investigate the impact of structural defects on OER performance for representative LaNiO₃ perovskite electrocatalysts. Hydrogen reduction of 700 °C calcined LaNiO₃ induces a high density of surface oxygen vacancies, and confers significantly enhanced OER activity and stability compared to unreduced LaNiO₃ ; the former exhibit a low onset overpotential of 380 mV at 10 mA cm^-2 and a small Tafel slope of 70.8 mV dec^-1 . Oxygen vacancy formation is accompanied by mixed Ni²⁺ /Ni³⁺ valence states, which quantum-chemical DFT calculations reveal modify the perovskite electronic structure. Further, it reveals that the formation of oxygen vacancies is thermodynamically more favourable on the surface than in the bulk; it increases the electronic conductivity of reduced LaNiO₃ in accordance with the enhanced OER activity that is observed.

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Oxide perovskites have emerged as an important class of materials with important applications in many technological areas, particularly thermocatalysis, electrocatalysis, photocatalysis, and energy storage. However, their implementation faces numerous challenges that are familiar to the chemist and materials scientist. The present work surveys the state-of-the-art by integrating these two viewpoints, focusing on the critical role that defect engineering plays in the design, fabrication, modification, and application of these materials. An extensive review of experimental and simulation studies of the synthesis and performance of oxide perovskites and devices containing these materials is coupled with exposition of the fundamental and applied aspects of defect equilibria. The aim of this approach is to elucidate how these issues can be integrated in order to shed light on the interpretation of the data and what trajectories are suggested by them. This critical examination has revealed a number of areas in which the review can provide a greater understanding. These include considerations of (1) the nature and formation of solid solutions, (2) site filling and stoichiometry, (3) the rationale for the design of defective oxide perovskites, and (4) the complex mechanisms of charge compensation and charge transfer. The review concludes with some proposed strategies to address the challenges in the future development of oxide perovskites and their applications.

Tailoring the Co4+/Co3+ active sites in a single perovskite as a bifunctional catalyst for the oxygen electrode reactions

Developing a non-precious metal electrocatalyst for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is desirable for low-cost energy conversion devices. Herein, we designed and developed a new class of layered cation ordered single perovskite oxides (Pr0.9Ca0.1Co0.8Fe0.2O3-δ) with an optimum ratio of the Co4+/Co3+ oxidation state and oxygen vacancy for oxygen electrode reactions. Catalytic activities are investigated as a function of electronic structure and surface composition. A moderate amount of Ca and Fe dopants keeps the B-site Co cations at a higher oxidation state (Co4+) and generates a vast amount of an oxygen defect rich structure. The improved performance in the ORR and OER is explained by the increase in the sites of Co4+ cations, a state responsible for enhanced catalytic activity. A hypothesis for how doped Ca fraction affects the adsorbed oxygen species and contributes to catalytic activity is discussed. This work sheds light on the influence of crystal structure on the catalytic property and reports that ORR and OER activities are affected not only by oxygen vacancy concentration but also by the oxidation state of the transition metal in the perovskite oxide.

3d Transition-Metal-Mediated Columbite Nanocatalysts for Decentralized Electrosynthesis of Hydrogen Peroxide

Decentralized electrosynthesis of hydrogen peroxide (H₂ O₂ ) via oxygen reduction reaction (ORR) can enable applications in disinfection control, pulping and textile bleaching, wastewater treatment, and renewable energy storage. Transition metal oxides are usually not efficient catalysts because they are more selective to produce H₂ O. Here, it is shown that divalent 3d transition metal cations (Mn, Fe, Co, Ni, and Cu) can control the catalytic activity and selectivity of columbite nanoparticles. They are synthesized using polyoxoniobate (K₇ HNb₆ O₁₉ ·13H₂ O) and divalent metal cations by a hydrothermal method. The optimal NiNb₂ O₆ holds an H₂ O₂ selectivity of 96% with the corresponding H₂ O₂ Faradaic efficiency of 92% in a wide potential window from 0.2 to 0.6 V in alkaline electrolyte, superior to other transition metal oxide catalysts. Ex situ X-ray photoelectron and operando Fourier-transformed infrared spectroscopic studies, together with density functional theory calculations, reveal that 3d transition metals shift the d-band center of catalytically active surface Nb atoms and change their interactions with ORR intermediates. In an application demonstration, NiNb₂ O₆ delivers H₂ O₂ productivity up to 1 mol_H2O2 g_cat ^-1 h^-1 in an H-shaped electrolyzer and can yield catholytes containing 300 × 10^-3 m H₂ O₂ to efficiently decomposing several organic dyes. The low-cost 3d transition-metal-mediated columbite catalysts show excellent application potentials.

Super-Hydrophilic Hierarchical Ni-Foam-Graphene-Carbon Nanotubes-Ni2P-CuP2 Nano-Architecture as Efficient Electrocatalyst for Overall Water Splitting

Water splitting via an electrochemical process to generate hydrogen is an economic and green approach to resolve the looming energy and environmental crisis. The rational design of multicomponent materials with seamless interfaces having robust stability, facile scalability, and low-cost electrocatalysts is a grand challenge to produce hydrogen by water electrolysis. Herein, we report a superhydrophilic homogeneous bimetallic phosphide of Ni₂P-CuP₂ on Ni-foam-graphene-carbon nanotubes (CNTs) heterostructure using facile electrochemical metallization followed by phosphorization without any intervention of metal-oxides/hydroxides. This bimetallic phosphide shows ultralow overpotentials of 12 (HER, hydrogen evolution reaction) and 140 mV (OER, oxygen evolution reaction) at current densities of 10 and 20 mA/cm² in acidic and alkaline mediums, respectively. The excellent stability lasts for at least for 10 days at a high current density of 500 mA/cm² without much deviation, inferring the practical utilization of the catalyst toward green fuel production. Undoubtedly, the catalyst is capable enough for overall water splitting at a very low cell voltage of 1.45 V @10 mA/cm² with an impressive stability of at least 40 h, showing a minimum loss of potential. Theoretical study has been performed to understand the reaction kinetics and d-band shifting among metal atoms in the heterostructure (Ni₂P-CuP₂) that favor the HER and OER activities, respectively. In addition, the catalyst demonstrates an alternate transformation of solar energy to green H₂ production using a standard silicon solar cell. This work unveils a smart design and synthesizes a highly stable electrocatalyst against an attractive paradigm of commercial water electrolysis for renewable electrochemical energy conversion.

Uncovering the Role of Countercations in Ligand Exchange of WSe2: Tuning the d-Band Center toward Improved Hydrogen Desorption

The role of countercations that do not bind to core nanocrystals (NCs) but rather ensure charge balance on ligand-exchanged NC surfaces has been rarely studied and even neglected. Such a scenario is unfortunate, as an understanding of surface chemistry has emerged as a key factor in overcoming colloidal NC limitations as catalysts. In this work, we report on the unprecedented role of countercations in ligand exchange for a colloidal transition metal dichalcogenide (TMD), WSe₂, to tune the d-band center toward the Fermi level for enhanced hydrogen desorption. Conventional long-chain organic ligands, oleylamine, of WSe₂ NCs are exchanged with short atomic S^2- ligands having countercations to preserve the charge balance (WSe₂/S^2-/M⁺, M = Li, Na, K). Upon exchange with S^2- ligands, the charge-balancing countercations are intercalated between WSe₂ layers, thereby serving a unique function as an electrochemical hydrogen evolution reaction (HER) catalyst. The HER activity of ligand-exchanged colloidal WSe₂ NCs shows a decrease in overpotential by down-shift of d-band center to induce more electron-filling in antibonding orbital and an increase in the electrochemical active surface area (ECSA). Exchanging surface functionalities with S^2- anionic ligands enhances HER kinetics, while the existence of intercalated countercations improves charge transfer with the electrolyte. The obtained results suggest that both anionic ligands and countercationic species in ligand exchange must be considered to enhance the overall catalytic activity of colloidal TMDs.

Oxygen-Deficient Cobalt-Based Oxides for Electrocatalytic Water Splitting

An apparent increased interest has been recently devoted towards the previously untrodden path for anionic point defect engineering of electrocatalytic surfaces. The role of vacancy engineering in improving photo- and electrocatalytic activities of transition metal oxides (TMOs) has been widely reported. In particular, oxygen vacancy modulation on electrocatalysts of cobalt-based TMOs has seen a fresh spike of research work due to the substantial improvements they have shown towards oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Oxygen vacancy engineering is an effective scheme to quintessentially tune the electronic structure and charge transport, generate secondary active surface phases, and modify the surface adsorption/desorption behavior of reaction intermediates during water splitting. Based on contemporary efforts for inducing oxygen vacancies in a variety of cobalt oxide types, this work addresses facile and environmentally benign synthesis strategies, characterization techniques, and detailed insight into the intrinsic mechanistic modulation of electrocatalysts. It is our foresight that appropriate utilization of the principles discussed herein will aid researchers in rationally designing novel materials that can outperform noble metal-based electrocatalysts. Ultimately, future electrocatalysis implementation for selective seawater splitting is believed to depend on regulating the surface chemistry of active and stable TMOs.

Defect Electrocatalysts and Alkaline Electrolyte Membranes in Solid-State Zinc-Air Batteries: Recent Advances, Challenges, and Future Perspectives

Rechargeable zinc-air batteries (ZABs) have attracted much attention due to their promising capability for offering high energy density while maintaining a long operational lifetime. One of the biggest challenges in developing all-solid-state ZABs is to design suitable bifunctional air-electrodes, which can efficiently catalyze the key oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) electrochemical processes. The other one is to develop robust electrolyte membranes with high ionic conductivity and superb water retention capability. In this review, an in-depth discussion of the challenges, mechanisms, and design strategies for the defect electrocatalyst and the electrolyte membrane in all-solid-state ZABs will be offered. In particular, the crucial defect engineering strategies to tune the ORR/OER catalysts are summarized, including direct controllable strategies: 1) atomically dispersed metal sites control, 2) vacancy defects control, and 3) lattice-strain control, and the indirect strategies: 4) crystallographic structure control and 5) metal-carbon support interaction control. Moreover, the most recent progress in designing electrolyte membranes, including polyvinyl alcohol-based membranes and gel polymer electrolyte membranes, is presented. Finally, the perspectives are proposed for rational design and fabrication of the desired air electrode and electrolyte membrane to improve the performance and prolong the lifetime of all-solid-state ZABs.

Materials Engineering in Perovskite for Optimized Oxygen Evolution Electrocatalysis in Alkaline Condition

Developing robust and highly efficient electrocatalysts for oxygen evolution reaction (OER) is critical for renewable, secure, and emission-free energy technologies. Perovskite Ba_0.5 Sr_0.5 Co_0.8 Fe_0.2 O_3-δ (BSCF) has emerged as a promising OER electrocatalyst with desirable intrinsic activity. Inspired by the factor that substituting in transition-metal sublattice of the perovskite can further optimize the OER activity, herein, nickel-substituted BSCF is adopted, that is, Ba_0.5 Sr_0.5 Co_{0.8- x} Fe_0.2 Ni_x O_3-δ (x = 0.05, 0.1, 0.2, denoted as BSCFNx, x = 5, 10, 20, respectively), as efficient and stable OER catalysts in alkaline solution. The phase structure, microchemistry, oxygen vacancy, and electrochemical activity of such samples are well-investigated. Endowed with an overpotential of only 278 mV at 10 mA cm^-2 and a Tafel slope of merely 47.98 mV dec^-1 , BSCFN20 exhibits the optimum OER activity. When constructing a two-electrode cell with BSCFN20 as anode and Pt/C as cathode (BSCFN20||Pt/C) for water splitting, it only requires a voltage of 1.63 V to achieve 50 mA cm^-2 , and the BSCFN20||Pt/C remains stable within 80 h at 10 mA cm^-2 , superior to the state-of-the-art RuO₂ ||Pt/C counterpart. This work provides a feasible strategy for designing stable and highly active perovskite electrocatalysts for future energy storage and conversion.

Oxygen-deficient perovskites for oxygen evolution reaction in alkaline media: a review

Oxygen vacancies in complex metal oxides and specifically in perovskites are demonstrated to significantly enhance their electrocatalytic activities due to facilitating a degree of control in the material’s intrinsic properties. The reported enhancement in intrinsic OER activity of oxygen-deficient perovskites surfaces has inspired their fabrication via a myriad of schemes. Oxygen vacancies in perovskites are amongst the most favorable anionic or Schottky defects to be induced due to their low formation energies. This review discusses recent efforts for inducing oxygen vacancies in a multitude of perovskites, including facile and environmentally benign synthesis strategies, characterization techniques, and detailed insight into the intrinsic mechanistic modulation of perovskite electrocatalysts. Experimental, analytical, and computational techniques dedicated to the understanding of the improvement of OER activities upon oxygen vacancy induction are summarized in this work. The identification and utilization of intrinsic activity descriptors for the modulation of configurational structure, improvement in bulk charge transport, and favorable inflection of the electronic structure are also discussed. It is our foresight that the approaches, challenges, and prospects discussed herein will aid researchers in rationally designing highly active and stable perovskites that can outperform noble metal-based OER electrocatalysts.