Advances in Thermodynamic-Kinetic Model for Analyzing the Oxygen Evolution Reaction

Constructing FeNiPt@C Trifunctional Catalyst by High Spin-Induced Water Oxidation Activity for Zn-Air Battery and Anion Exchange Membrane Water Electrolyzer

Developing cost-efficient trifunctional catalysts capable of facilitating hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) activity is essential for the progression of energy devices. Engineering these catalysts to optimize their active sites and integrate them into a cohesive system presents a significant challenge. This study introduces a nanoflower (NFs)-like carbon-encapsulated FeNiPt nanoalloy catalyst (FeNiPt@C NFs), synthesized by substituting Co2+ ions with high-spin Fe2+ ions in Hofmann-type metal-organic framework, followed by carbonization and pickling processes. The FeNiPt@C NFs catalyst, characterized by its nitrogen-doped carbon-encapsulated metal alloy structure and phase-segregated FeNiPt alloy with slight surface oxidization, exhibits excellent trifunctional catalytic performance. This is evidenced by its activities in HER (-25 mV at 10 mA cm-2), ORR (half-wave potential of 0.93 V), and OER (294 mV at 10 mA cm-2), with the enhanced water oxidation activity attributed to the high-spin state of the Fe element. Consequently, the Zn-air battery and anion exchange membrane water electrolyzer assembled by FeNiPt@C NFs catalyst demonstrate remarkable power density (168 mW cm-2) and industrial-scale current density (698 mA cm-2 at 1.85 V), respectively. This innovative integration of multifunctional catalytic sites paves the way for the advancement of sustainable energy systems.

Tuning the Oxygen Reduction Reactivity of Layered Perovskites Using the Jahn-Teller Effect

Compositional tuning of layered perovskite oxides provides a means of systematically studying how local distortions affect fundamental aspects of electrochemical reaction pathways. Structural analysis of a family of samples La1.2Sr0.8Ni1-yCoyO4 shows that Ni-rich compositions have an expanded crystalline c axis, which is anisotropically compressed by systematic Co incorporation. Raman spectra reveal the strong growth of a symmetry forbidden mode, which suggests that Co acts through localized distortions. Crystallographic and spectroscopic parameters describing this structural distortion correlate to the measured Tafel slopes for the oxygen reduction reaction for all Ni-containing samples, which is attributed to the distortion of potential energy surfaces by the Jahn-Teller expansion of d7 Ni(III) cations. Incorporation of Co not only minimizes the distortion but alters the apparent selectivity of the oxygen reduction reaction away from H2O2 and toward H2O. Rotating ring-disk electrochemical measurements, however, indicate that the apparent change in selectivity is due to activation of a first-order chemical disproportionation of H2O2 that is activated by Co in the lattice. These outcomes will support efforts to design electrocatalysts and reactors for the electrochemical synthesis of H2O2.

Amorphous/Crystalline Phases Mixed Nanosheets Array Rich in Oxygen Vacancies Boost Oxygen Evolution Reaction of Spinel Oxides in Alkaline Media

As promising oxygen evolution reaction (OER) catalysts, spinel-type oxides face the bottleneck of weak adsorption for oxygen-containing intermediates, so it is challenging to make a further breakthrough in remarkably lowering the OER overpotential. In this study, a novel strategy is proposed to substantially enhance the OER activity of spinel oxides based on amorphous/crystalline phases mixed spinel FeNi2O4 nanosheets array, enriched with oxygen vacancies, in situ grown on a nickel foam (NF). This unique architecture is achieved through a one-step millisecond laser direct writing method. The presence of amorphous phases with abundant oxygen vacancies significantly enhances the adsorption of oxygen-containing intermediates and changes the rate-determining step from OH*→O* to O*→OOH*, which greatly reduces the thermodynamic energy barrier. Moreover, the crystalline phase interweaving with amorphous domains serves as a conductive shortcut to facilitate rapid electron transfer from active sites in the amorphous domain to NF, guaranteeing fast OER kinetics. Such an anodic electrode exhibits a nearly ten fold enhancement in OER intrinsic activity compared to the pristine counterpart. Remarkably, it demonstrates record-low overpotentials of 246 and 315 mV at 50 and 500 mA cm-2 in 1 m KOH with superior long-term stability, outperforming other NiFe-based spinel oxides catalysts.

Nickel molybdate/cobalt iron carbonate hydroxide heterojunction with oxygen vacancy enables interfacial synergism to trigger oxygen evolution reaction

The development of electrocatalysts with excellent performance toward oxygen evolution reaction (OER) for the production of hydrogen is of great significance to alleviate energy crisis and environmental pollution. Herein, the heterostructure (NMO/FCHC-0.4) was fabricated by the coupling growth of NiMoO4 (NMO) and cobalt iron carbonate hydroxide (FCHC) on nickel foam as an electrocatalyst for OER. The interfacial synergy on NMO/FCHC-0.4 heterojunction can promote the interfacial electron redistribution, affect the center position of d band, optimize the adsorption of intermediate, and improve the conductivity. Beyond, oxygen defect sites are conducive to the adsorption of intermediates, and increase the number of active sites. Real-time OER kinetic simulation revealed that the interfacial synergism and molybdate could reduce the adsorption of hydroxide, promote the deprotonation step of M-OH, and facilitate the formation of M-OOH (M represents the metal active site). As a result, NMO/FCHC-0.4 displays excellent OER electrocatalytic performance with an overpotential of 250/280 mV at the current density 100/200 mA cm-2 and robust stability at 100 mA cm-2 for 100 h. This work provides deep insights into the roles of interfacial electronic modulation and oxygen vacancy to design high-efficiency electrocatalysts for OER.

Triggering efficient reconstructions of Co/Fe dual-metal incorporated Ni hydroxide by phosphate additives for electrochemical hydrogen and oxygen evolutions

Alkaline electrochemical water splitting has been considered as an efficient way for the green hydrogen production in industry, where the electrocatalysts play the critical role for the electricity-to-fuel conversion efficiency. Phosphate salts are widely used as additives in the fabrication of electrocatalysts with improved activity, but their roles on the electrocatalytic performance have not been fully understood. Herein, we fabricate Co, Fe dual-metal incorporated Ni hydroxide on Ni foam using NaH2PO4 ((Co, Fe)NiOxHy-pi) and NaH2PO2 ((Co, Fe)NiOxHy-hp) as additive, respectively. We find that (Co, Fe)NiOxHy-hp with NaH2PO2 in the fabrication shows high activity and stability for both HER and OER (a overpotential of -0.629 V and 0.65 V at 400 mA cm-2 for HER and OER, respectively). Further experiment reveals that the reconstructed structures of electrocatalyst by using NaH2PO2 (hp) endow high electrocatalytic performances: (1) in-situ generated active metal improves the accumulation, transportation and activity of hydrogen species in the HER process; and (2) in-situ generated poor-crystalline hydroxide endows superior charge/mass transportation and kinetics improvements in the OER process. Our study may provide an insightful understanding on the catalytic performance of non-precious metal electrocatalysts by controlling additives and guidance for the design and synthesis of novel electrocatalysts.

Electrically driven proton transfer promotes Brønsted acid catalysis by orders of magnitude

Electric fields play a key role in enzymatic catalysis and can enhance reaction rates by 100,000-fold, but the same rate enhancements have yet to be achieved in thermochemical heterogeneous catalysis. In this work, we probe the influence of catalyst potential and interfacial electric fields on heterogeneous Brønsted acid catalysis. We observed that variations in applied potential of ~380 mV led to a 100,000-fold rate enhancement for 1-methylcyclopentanol dehydration, which was catalyzed by carbon-supported phosphotungstic acid. Mechanistic studies support a model in which the interfacial electrostatic potential drop drives quasi-equilibrated proton transfer to the adsorbed substrate prior to rate-limiting C-O bond cleavage. Large increases in rate with potential were also observed for the same reaction catalyzed by Ti/TiOyHx and for the Friedel Crafts acylation of anisole with acetic anhydride by carbon-supported phosphotungstic acid.

Step-by-step guide for electrochemical generation of highly oxidizing reactive species on BDD for beginners

Selecting the ideal anodic potential conditions and corresponding limiting current density to generate reactive oxygen species, especially the hydroxyl radical (•OH), becomes a major challenge when venturing into advanced electrochemical oxidation processes. In this work, a step-by-step guide for the electrochemical generation of •OH on boron-doped diamond (BDD) for beginners is shown, in which the following steps are discussed: i) BDD activation (assuming it is new), ii) the electrochemical response of BDD (in electrolyte and ferri/ferro-cyanide), iii) Tafel plots using sampled current voltammetry to evaluate the overpotential region where •OH is mainly generated, iv) a study of radical entrapment in the overpotential region where •OH generation is predominant according to the Tafel plots, and v) finally, the previously found ideal conditions are applied in the electrochemical degradation of amoxicillin, and the instantaneous current efficiency and relative cost of the process are reported.

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (MN4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure-electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. Critical unanswered questions as well as promising underexplored research directions are identified.

Cooperative Fe sites on transition metal (oxy)hydroxides drive high oxygen evolution activity in base

Fe-containing transition-metal (oxy)hydroxides are highly active oxygen-evolution reaction (OER) electrocatalysts in alkaline media and ubiquitously form across many materials systems. The complexity and dynamics of the Fe sites within the (oxy)hydroxide have slowed understanding of how and where the Fe-based active sites form-information critical for designing catalysts and electrolytes with higher activity and stability. We show that where/how Fe species in the electrolyte incorporate into host Ni or Co (oxy)hydroxides depends on the electrochemical history and structural properties of the host material. Substantially less Fe is incorporated from Fe-spiked electrolyte into Ni (oxy)hydroxide at anodic potentials, past the nominally Ni2+/3+ redox wave, compared to during potential cycling. The Fe adsorbed under constant anodic potentials leads to impressively high per-Fe OER turn-over frequency (TOFFe) of ~40 s-1 at 350 mV overpotential which we attribute to under-coordinated "surface" Fe. By systematically controlling the concentration of surface Fe, we find TOFFe increases linearly with the Fe concentration. This suggests a changing OER mechanism with increased Fe concentration, consistent with a mechanism involving cooperative Fe sites in FeOx clusters.

Enhancing electrocatalytic methanol oxidation of Pd-Ir nanoalloy through electron-rich catalytic interface induced by incorporating phosphorus

Incorporating less expensive nonmetal phosphorus (P) into noble metal-based catalysts has become a developing strategy to enhance the catalytic performance of electrocatalysts for methanol electrooxidation reaction (MOR), attributing to the electronic and synergistic structure alteration mechanism. In the work, three-dimensional nitrogen-doped graphene anchoring ternary Pd-Ir-P nanoalloy catalyst (Pd₇IrP_x/NG) was prepared by co-reduction strategy. As a multi-electron system, elemental P adjusts the outer electron structure of Pd and diminishes the particle size of nanocomposites, which heightens the electrocatalytic activity effectively and accelerate MOR kinetics in alkaline medium. The study reveals that the electron effect and ligand effect induced by P atoms on the hydrophilic and electron-rich surface of Pd₇Ir/NG and Pd₇IrP_x/NG samples can reduce the initial oxidation potential and peak potential of CO_ads, showing significantly enhanced the anti-poisoning ability compared with commercial Pd/C as the benchmark. Meanwhile, the stability of Pd₇IrP_x/NG is significantly higher than that of commercial Pd/C. The facile synthetic approach provides an economic option and a new vision for the development of electrocatalysts in MOR.

An electrochemically fabricated cobalt iron oxyhydroxide bifunctional electrode for an anion exchange membrane water electrolyzer

For an anion exchange membrane water electrolyzer (AEMWE), exploring bifunctional electrodes with low cost and high efficiency is a crucial task for future renewable energy systems. Herein, we report a simple method to fabricate cobalt iron oxyhydroxide (Co_zFe_1-zO_xH_y) bifunctional electrodes for AEMWEs. The bifunctional electrodes were prepared via one-pot electrodeposition on Ti paper (TP). By adjusting the electrodeposition conditions, the morphology and composition of Co_zFe_1-zO_xH_y/TP could be controlled. The Co₆₅Fe₃₅O_xH_y/TP electrode demonstrated the highest activity for overall water electrolysis owing to the maximized synergy effect between Co and Fe. The bifunctional activities of Co₆₅Fe₃₅O_xH_y/TP were well retained at -50 and 50 mA cm^-2 for 12 h. Co₆₅Fe₃₅O_xH_y/TP, which shows the highest bifunctional activity, was employed in an AEMWE single cell as the anode and cathode. The AEMWE single cell employing Co₆₅Fe₃₅O_xH_y/TP showed a current density of 0.605 A cm^-2 at a cell voltage of 2.0 V_cell. The calculated energy efficiency of the single cell is 55.7% at 2.0 A cm^-2, which is comparable with those of the state-of-the-art AEMWE single cells with bifunctional electrodes. Furthermore, the cell voltage of the single cell with Co₆₅Fe₃₅O_xH_y/TP showed negligible degradation for 50 h at 0.6 A cm^-2.

Adsorption Energy in Oxygen Electrocatalysis

Adsorption energy (AE) of reactive intermediate is currently the most important descriptor for electrochemical reactions (e.g., water electrolysis, hydrogen fuel cell, electrochemical nitrogen fixation, electrochemical carbon dioxide reduction, etc.), which can bridge the gap between catalyst's structure and activity. Tracing the history and evolution of AE can help to understand electrocatalysis and design optimal electrocatalysts. Focusing on oxygen electrocatalysis, this review aims to provide a comprehensive introduction on how AE is selected as the activity descriptor, the intrinsic and empirical relationships related to AE, how AE links the structure and electrocatalytic performance, the approaches to obtain AE, the strategies to improve catalytic activity by modulating AE, the extrinsic influences on AE from the environment, and the methods in circumventing linear scaling relations of AE. An outlook is provided at the end with emphasis on possible future investigation related to the obstacles existing between adsorption energy and electrocatalytic performance.

CoP/Fe-Co9 S8 for Highly Efficient Overall Water Splitting with Surface Reconstruction and Self-Termination

Highly efficient electrochemical water splitting is of prime importance in hydrogen energy but is suffered from the slow kinetics at the anodic oxygen evolution reaction. Herein, combining the surface activation with the heterostructure construction strategy, the CoP/Fe-Co₉ S₈ heterostructures as the pre-catalyst for highly efficient oxygen evolution are successfully synthesized. The catalyst only needs 156 mV to reach 10 mA cm^-2 and keeps stable for more than 150 h. Inductively coupled plasma optical emission spectrometry, in situ Raman spectroscopy and density functional theory calculations verify that the introduction of Fe can promote the formation of highly active Co(IV)-O sites and lead to a self-termination of surface reconstruction, which eventually creates a highly active and stable oxygen evolution catalytic surface. Besides, the catalyst also demonstrates high hydrogen evolution reaction activity with an overpotential of 62 mV@10 mA cm^-2 . Benefiting from its bifunctionality and self-supporting property, the membrane electrode assembly electrolyzer equipped with these catalysts achieves high overall water splitting efficiency of 1.68 V@1 A cm^-2 .

A versatile artificial metalloenzyme scaffold enabling direct bioelectrocatalysis in solution

Artificial metalloenzymes (ArMs) are commonly designed with protein scaffolds containing buried coordination pockets to achieve substrate specificity and product selectivity for homogeneous reactions. However, their reactivities toward heterogeneous transformations are limited because interfacial electron transfers are hampered by the backbone shells. Here, we introduce bacterial small laccase (SLAC) as a new protein scaffold for constructing ArMs to directly catalyze electrochemical transformations. We use molecular dynamics simulation, x-ray crystallography, spectroscopy, and computation to illustrate the scaffold-directed assembly of an oxo-bridged dicobalt motif on protein surface. The resulting ArM in aqueous phase catalyzes electrochemical water oxidation without mediators or electrode modifications. Mechanistic investigation reveals the role of SLAC scaffold in defining the four-electron transfer pathway from water to oxygen. Furthermore, we demonstrate that SLAC-based ArMs implemented with Ni²⁺, Mn²⁺, Ru³⁺, Pd²⁺, or Ir³⁺ also enable direct bioelectrocatalysis of water electrolysis. Our study provides a versatile and generalizable route to complement heterogeneous repertoire of ArMs for expanded applications.

Synergistic Incorporating RuO2 and NiFeOOH Layers onto Ni3 S2 Nanoflakes with Modulated Electron Structure for Efficient Water Splitting

Synergistic electronic modulations is an effective strategy to develop efficient and stable electrocatalysts for the electrochemical hydrogen production via water splitting. Herein, tremella-like Ni₃ S₂ @RuO₂ and Ni₃ S₂ @NiFeOOH heterostructures catalysts are constructed on Ni foams (NF) by coupling RuO₂ and NiFeOOH on Ni₃ S₂ nanoflake arrays. The resulting Ni₃ S₂ @RuO₂ /NF electrode exhibits top-level hydrogen evolution reaction electrocatalysis with an extremely low overpotential of 12 mV at 10 mA cm^-2 and a Tafel slope of 30.7 mV dec^-1 , as well as the as-obtained Ni₃ S₂ @NiFeOOH/NF electrode with tunable binding energy for OH* intermediates shows remarkable oxygen evolution reaction electrocatalysis with an overpotential of 227 mV at 10 mA cm^-2 . The electrolyzer employing Ni₃ S₂ @RuO₂ /NF electrode for cathodic H₂ production and Ni₃ S₂ @NiFeOOH/NF for anodic O₂ production merely needs a low voltage of 1.47 V to drive 10 mA cm^-2 with excellent durability. The combined theoretical calculation and X-ray photoelectron spectroscopy investigation reveal that heterogeneous configuration can induce electron transfer from Ni₃ S₂ to RuO₂ through NiRu/SRu bonds, and thus tailor the d-band center and optimize the activated H₂ O/H* Gibbs free energies for enhanced hydrogen evolution reaction on Ni₃ S₂ @RuO₂ . This study may shed new light on the construction of heterostructures as highest-performing electrocatalysts and offer unique insight into the theory mechanism.

Introducing Brønsted acid sites to accelerate the bridging-oxygen-assisted deprotonation in acidic water oxidation

Oxygen evolution reaction (OER) consists of four sequential proton-coupled electron transfer steps, which suffer from sluggish kinetics even on state-of-the-art ruthenium dioxide (RuO₂) catalysts. Understanding and controlling the proton transfer process could be an effective strategy to improve OER performances. Herein, we present a strategy to accelerate the deprotonation of OER intermediates by introducing strong Brønsted acid sites (e.g. tungsten oxides, WO_x) into the RuO₂. The Ru-W binary oxide is reported as a stable and active iridium-free acidic OER catalyst that exhibits a low overpotential (235 mV at 10 mA cm⁻²) and low degradation rate (0.014 mV h⁻¹) over a 550-hour stability test. Electrochemical studies, in-situ near-ambient pressure X-ray photoelectron spectroscopy and density functional theory show that the W-O-Ru Brønsted acid sites are instrumental to facilitate proton transfer from the oxo-intermediate to the neighboring bridging oxygen sites, thus accelerating bridging-oxygen-assisted deprotonation OER steps in acidic electrolytes. The universality of the strategy is demonstrated for other Ru-M binary metal oxides (M = Cr, Mo, Nb, Ta, and Ti).

While water electrolysis devices represent a technology for renewable energy, there are few stable catalysts that survive the acidic conditions. Here, authors enhance acidic oxygen evolution by introducing strong Brønsted acid sites into RuO₂ to accelerate bridging-oxygen-assisted deprotonation.

Boosting the Oxygen Evolution Reaction by Controllably Constructing FeNi3/C Nanorods

Transition bimetallic alloy-based catalysts are regarded as attractive alternatives for the oxygen evolution reaction (OER), attributed to their competitive economics, high conductivity and intrinsic properties. Herein, we prepared FeNi3/C nanorods with largely improved catalytic OER activity by combining hydrothermal reaction and thermal annealing treatment. The temperature effect on the crystal structure and chemical composition of the FeNi3/C nanorods was revealed, and the enhanced catalytic performance of FeNi3/C with an annealing temperature of 400 °C was confirmed by several electrochemical tests. The outstanding catalytic performance was assigned to the formation of bimetallic alloys/carbon composites. The FeNi3/C nanorods showed an overpotential of 250 mV to afford a current density of 10 mA cm−2 and a Tafel slope of 84.9 mV dec−1, which were both smaller than the other control samples and commercial IrO2 catalysts. The fast kinetics and high catalytic stability were also verified by electrochemical impendence spectroscopy and chronoamperometry for 15 h. This study is favorable for the design and construction of bimetallic alloy-based materials as efficient catalysts for the OER.

In Situ Precise Tuning of Bimetallic Electronic Effect for Boosting Oxygen Reduction Catalysis

Tuning intermediate adsorption energy by shifting the d-band center offers a powerful strategy to tailor the reactivity of metal catalysts. Here we report a potential sweep method to grow Pd layer-by-layer on Au with the capability to in situ measure the surface structure through an ethanol oxidation reaction. Spectroscopic characterizations reveal charge-transfer induced valence band restructuring in the Pd overlayer, which shifts the d-band center away from the Fermi level compared to bulk Pd. Precise overlayer control gives the optimal bimetallic surface of two monolayers (ML) Pd on Au, which exhibits more than 370-fold mass activity enhancement in oxygen reduction reaction (at 0.9 V vs. reversible hydrogen electrode) and 40 mV increase in half-wave potential compared to the Pt/C. Tested in a homemade Zn-air battery, the 2-ML-Pd/Au/C exhibits a maximum power density of 296 mW/cm² and specific activity of 804 mAh/g_Zn, much higher than Pt/C with the same catalyst loading amount.

Perspective on intermetallics towards efficient electrocatalytic water-splitting

Intermetallic compounds exhibit attractive electronic, physical, and chemical properties, especially in terms of a high density of active sites and enhanced conductivity, making them an ideal class of materials for electrocatalytic applications. Nevertheless, widespread use of intermetallics for such applications is often limited by the complex energy-intensive processes yielding larger particles with decreased surface areas. In this regard, alternative synthetic strategies are now being explored to realize intermetallics with distinct crystal structures, morphology, and chemical composition to achieve high performance and as robust electrode materials. In this perspective, we focus on the recent advances and progress of intermetallics for the reaction of electrochemical water-splitting. We first introduce fundamental principles and the evaluation parameters of water-splitting. Then, we emphasize the various synthetic methodologies adapted for intermetallics and subsequently, discuss their catalytic activities for water-splitting. In particular, importance has been paid to the chemical stability and the structural transformation of the intermetallics as well as their active structure determination under operating water-splitting conditions. Finally, we describe the challenges and future opportunities to develop novel high-performance and stable intermetallic compounds that can hold the key to more green and sustainable economy and rise beyond the horizon of water-splitting application.

Spatial Confinement of a Carbon Nanocone for an Efficient Oxygen Evolution Reaction

A major bottleneck of large-scale water splitting for hydrogen production is the lack of catalysts for the oxygen evolution reaction (OER) with low cost and high efficiency. In this work, we proposed an electrocatalyst of a curved carbon nanocone embedded with two TMN₄ active sites (TM = transition metal) and used first-principles calculations to investigate their OER mechanisms and catalytic activities. In the particular spatial confinement of a curved nanocone, we found that the distance between intermediates adsorbed on two active sites is shorter than the distance between these two active sites. This finding can be used to enhance OER activity by distance-dependent interaction between intermediates through two different mechanisms. The first mechanism in which an O₂ molecule is generated from two neighboring *O intermediates exhibits a linear activity trend, and the lowest overpotential is 0.27 V for the FeN₄ system. In the second mechanism, selective stabilization of the *OOH intermediate is realized, leading to a new scaling relationship (ΔG_*OOH = ΔG_*OH + 3.04 eV) associated with a modified OER activity volcano (theoretical volcano apex at 0.29 V). The studied mechanisms of the spatial confinement of a carbon nanocone provide a new perspective for designing efficient OER catalysts.

Tuning the Electronic Structures of Multimetal Oxide Nanoplates to Realize Favorable Adsorption Energies of Oxygenated Intermediates

Highly active oxygen evolution reaction (OER) electrocatalysts are important to effectively transform renewable electricity to fuel and chemicals. In this work, we construct a series of multimetal oxide nanoplate OER electrocatalysts through successive cation exchange followed by electrochemical oxidation, whose electronic structure and diversified metal active sites can be engineered via the mutual synergy among multiple metal species. Among the examined multimetal oxide nanoplates, CoCeNiFeZnCuO_x nanoplates exhibit the optimal adsorption energy of OER intermediates. Together with the high electrochemical active surface area, the CoCeNiFeZnCuO_x nanoplates manage to deliver a small overpotential of 211 mV at an OER current density of 10 mA cm^-2 (η₁₀) with a Tafel slope as low as 21 mV dec^-1 in 1 M KOH solution, superior to commercial IrO₂ (339 mV at η₁₀, Tafel slope of 55 mV dec^-1), which can be stably operated at 10 mA cm^-2 (at an overpotential of 211 mV) and 100 mA cm^-2 (at an overpotential of 307 mV) for 100 h.