Initial Steps in the Selective Catalytic Reduction of NO with NH3 by TiO2-Supported Vanadium Oxides

Interface sites on vanadia-based catalysts are highly active for NOx removal under realistic conditions

TiO2-supported V2O5 catalysts are commonly used in NOx reduction with ammonia due to their robust catalytic performance. Over these catalysts, it is generally considered that the active species are mainly derived from the vanadia species rather than the intrinsic structure of V-O-Ti entities, namely the interface sites. To reveal the role of V-O-Ti entities in NH3-SCR, herein, we prepared TiO2/V2O5 catalysts and demonstrated that V-O-Ti entities were more active for NOx reduction under wet conditions than the V sites (V=O) working alone. On the V-O-Ti entities, kinetic measurements and first principles calculations revealed that NH3 activation exhibited a much lower energy barrier than that on V=O sites. Under wet conditions, the V-O-Ti interface significantly inhibited the transformation of V=O to V-OH sites thus benefiting NH3 activation. Under wet conditions, meanwhile, the migration of NH4+ from Ti site neighboring the V-O-Ti interface to Ti site of the V-O-Ti interface was exothermic; thus, V-O-Ti entities together with neighboring Ti sites could serve as channels linking NH3 pool and active centers for activation of NH4+. This finding reveals that the V-O-Ti interface sites on V-based catalysts play a crucial role in NOx removal under realistic conditions, providing a new perspective on NH3-SCR mechanism.

Binding of SO3 to Group 4 Transition Metal Oxide Nanoclusters

Transition metal oxide (TMO) clusters are being studied for their ability to absorb acid gases generated by energy production processes. The interaction of SO3, a byproduct of common industrial processes, with group 4 metal (Ti, Zr, and Hf) oxide nanoclusters, has been predicted using electronic structure methods. The calculations were done at the density functional theory (DFT) and correlated molecular orbital coupled cluster singles and doubles CCSD(T) theory levels. There is a reasonable agreement between the DFT/ωB97x-D energies with the CCSD(T) results. SO3 is predicted to strongly chemisorb to these clusters, as do NO2 and CO2. For SO3, these chemisorption processes favor binding to TMO clusters as SO42- sulfate in both the terminal and bridging configurations. It is predicted that SO3 fully extracts the bridging oxygen from the TMO lattice to form bridging SO42-. This is favorable because of the lower S-O bond dissociation energy of SO3, whereas other acid gases add across the bridging oxygen because of their higher A-O bond dissociation energy. SO3 is capable of physisorption as long as an exposed metal center is present in the lattice. If a metal center has a terminal oxo-group, then SO3 will prefer the SO42- configuration. An approximately linear relationship exists between the physisorption energy and proton affinity for rows 2 and 3 elements.

Prediction of the structures and heats of formation of MO2, MO3, and M2O5 for M = V, Nb, Ta, Pa

Structures for the mono-, di-, and tri-bridge isomers of M₂O₅ as well as those for the MO₂ and MO₃ fragments for M = V, Nb, Ta, and Pa were optimized at the density functional theory (DFT) level. Single point CCSD(T) calculations extrapolated to the complete basis set (CBS) limit at the DFT geometries were used to predict the energetics. The lowest energy dimer isomer was the di-bridge for M = V and Nb and the tri-bridge for M = Ta and Pa. The di-bridge isomers were predicted to be composed of MO₂⁺ and MO₃^- fragments, whereas the mono- and tri-bridge are two MO₂⁺ fragments linked by an O^2-. The heats of formation of M₂O₅ dimers, as well as MO₂ and MO₃ neutral and ionic species were predicted using the Feller-Peterson-Dixon (FPD) approach. The heats of formation of the MF₅ species were calculated to provide additional benchmarks. Dimerization energies to form the M₂O₅ dimers are predicted to become more negative going down group 5 and range from -29 to -45 kcal mol^-1. The ionization energies (IEs) for VO₂ and TaO₂ are essentially the same at 8.75 eV whereas the IEs for NbO₂ and PaO₂ are 8.10 and 6.25 eV, respectively. The predicted adiabatic electron affinities (AEAs) range from 3.75 eV to 4.45 eV for the MO₃ species and vertical detachment energies from 4.21 to 4.59 eV for MO₃^-. The calculated MO bond dissociation energies increase from 143 kcal mol^-1 for M = V to ∼170 kcal mol^-1 for M = Nb and Ta to ∼200 kcal mol^-1 for M = Pa. The M-O bond dissociation energies are all similar ranging from 97 to 107 kcal mol^-1. Natural bond analysis provided insights into the types of chemical bonds in terms of their ionic character. Pa₂O₅ is predicted to behave like an actinyl species dominated by the interactions of approximately linear PaO₂⁺ groups.

Assignment of Vibrational Bands of Critical Surface Species Containing Nitrogen in the Selective Catalytic Reduction of NO by NH3

The selective catalytic reduction (SCR) of NO by NH₃ on metal oxides plays a key role in minimizing NO_x emissions. Electronic structure calculations at the density functional theory level have been performed to predict the vibrational modes of NH₃/NH₄⁺ bound to validated cluster models of vanadium oxide bound to a TiO₂ surface. Excellent agreement of the scaled calculated values with the observed bands attributed to surface-bound species is found. The presence of NH₃ bound to Lewis acid sites and NH₄⁺ bound to Brønsted acid sites when VOH groups are present is supported by our predictions. NH₄⁺ is expected to dominate the spectra even at low concentrations, with predicted intensities 5 to 30 times greater than those predicted for surface-bound NH₃. This is particularly evident in the lowest-energy N-H stretches of surface NH₄⁺ due to partial proton transfer interactions with the vanadium oxide surface model. The current work is consistent with experimental vibrational spectroscopy results and does not support the presence of a significant amount of NH₂ on the catalyst surface for the SCR reaction on VO_x/TiO₂. The combined experimental and computational results support the presence of both NH₃- and NH₄⁺-type species bound to the surface.

Nitrogen atom coordination tuned transition metal catalysts for NO oxidation and reduction

Developing an efficient catalyst for NO oxidation and reduction at ambient temperature is a significant challenge. Recent studies have suggested that the N-coordinated transition metal (TM) single atom catalysts (SACs) have high catalytic activity and stability. Herein, we report the activation potential of a series of 3d TM atoms supported on N coordination-tuned graphene (GR) for NO oxidation and reduction. The results show that the N coordination pattern can greatly alter the catalytic reactivity of TM on the catalysts, and the TM atom on the catalysts with three-coordinated pyridinic nitrogen TM-N₃@GR exhibit the strongest chemical activity. Among the TM-N₃@GR catalysts, Ti-N₃@GR is the most promising candidate. The rate constants and equilibrium constants were calculated to evaluate the kinetic and thermodynamic feasibility of the catalytic reaction, respectively. Our results demonstrate that the reduction of NO to N₂ on Ti-N₃@GR can occur at ambient temperature with a large exotherm of 6.99 eV, and the oxidation of NO to NO₂ on Ti-N₃@GR can easily proceed when the temperature reaches 360 K with a large equilibrium constant. Our studies are of great significance for understanding the performance of N coordination-tuned catalysts and designing Ti-based catalysts for NO oxidation and reduction.

The interplay between acid-base properties and Fermi level pinning of a nano dispersed tungsten oxide - titania catalytic system

A series of WO₃/TiO₂ catalysts were synthesized, characterized, and evaluated for the NO selective catalytic reduction (SCR) with NH₃. Based on a wide range of characterization techniques, a detailed model was developed that describes the interfacial electron transfer between WO₃ and TiO₂ and defines a relationship between the acid-base properties of the catalytic surface and electronic structure modification. The electronic interactions at the WO₃/TiO₂ interface were quantified using variations in the system's electronic structure. Altering the dispersion and size of the WO₃ nanostructures results to drastic changes in titania's surface electron distribution, which are reflected in the pinning of Fermi level through an electron transfer process between WO₃ and TiO₂. The variations in the Fermi level were further related to changes in the point of zero charge (PZC) values and the activity towards NO SCR with NH_3, which was used as a test reaction. Temperature Programmed Surface Reaction (TPSR) was employed to study the catalytic activity at temperatures ranging from 30 °C to 500 °C and was quantitatively correlated to changes in coverage and interfacial charge transfer. We demonstrate that higher WO₃ loading on TiO₂ results in a stronger electronic interaction and a higher catalytic activity. This is because electron transfer increases the surface electron density, which enhances the surface basicity of TiO₂. The concomitant decrease in the adsorption energy of NH₃ results in a decrease in the activation energy, which is reflected in the SCR temperature onset.

An efficient strategy to screen an effective catalyst for NOx-SCR by deducing surface species using DRIFTS

HYPOTHESIS

Transition metal supported TiO₂ is one of the hottest catalysts in the field of selective catalytic reduction (SCR) of nitrogen oxides. Various formulas have been put forward for an enhanced activity. However, seldom work emphasizes on easy and fast screening of an effective catalyst.

EXPERIMENTS

In this work, Diffuse Reflection Fourier Transform Infrared (DRIFTS) screened catalyst by analyzing intermediates during SCR.

FINDINGS

TiO₂ provided main adsorption sites for NH₃ and the "Eley-Rideal" mechanism dominated the catalysis. The transition metals served as the bridge of electron transport. Moreover, the area reduction rate of adsorbed NH₃ and NH₄⁺ species in DRIFTS represented the electron-transfer rate as well as catalytic activity. In other words, a faster area reduction indicated a better SCR activity. Therefore, this work supplied a fast strategy to screen the most effective catalyst among different materials even without using a nitrogen oxides detector. At the same time, less ammonia and nitrogen oxides were used or discharged.

Theoretical Design of Transition Metal-Doped TiO2 for the Selective Catalytic Reduction of NO with NH3 by DFT Calculations

Many transition metal oxides supported on TiO2 have been studied for selective catalytic reduction (SCR) of NO with NH3. However, the trade-off exists between the low-temperature activity and N2 selectivity....

Ultrasonication-Assisted Preparation of a Mn-Based Blast Furnace Slag Catalyst: Effects on the Low-Temperature Selective Catalytic Reduction Denitration Process

Reducing costs and improving performance have always been hotspots in the field of catalyst research. In order to control the NO x in the low-temperature flue gas of nonpower industries, this paper studies the denitration performance of the ultrasonication-assisted preparation of Mn-based blast furnace slag selective catalytic reduction (SCR) low-temperature denitration catalysts. The catalyst was characterized by FT-IR, XRD, and SEM. The study found that ultrasound assistance can make the active components on the catalyst surface more uniformly dispersed and improve the catalytic activity of the catalyst. Under conditions of 80 W ultrasonic power and 20 min ultrasonic time, the denitration performance of the Mn-based blast furnace slag catalyst is optimal, and the NO removal rate is 2.5 times that of the unsonicated catalyst. This work clarified the mechanism of the effect of ultrasonic assistance on the Mn-based blast furnace slag catalyst and at the same time realized the utilization of solid waste resources and air pollution control.