Fine-Tuning Radical/Nonradical Pathways on Graphene by Porous Engineering and Doping Strategies

Facilely tuning the coating layers of Fe nanoparticles from iron carbide to iron nitride for different performance in Fenton-like reactions

In this study, a series of Fe-based materials are facilely synthesized using MIL-88A and melamine as precursors. Changing the mass ratio of melamine and MIL-88A could tune the coating layers of generated zero-valent iron (Fe0) particles from Fe3C to Fe3N facilely. Compared to Fe/Fe3N@NC sample, Fe/Fe3C@NC exhibits better catalytic activity and stability to degrade carbamazepine (CBZ) with peroxymonosulfate (PMS) as oxidant. Free radical quenching tests, open-circuit potential (OCP) test and electron paramagnetic resonance spectra (EPR) prove that hydroxyl radicals (OH) and superoxide radical (O2-) are dominant reactive oxygen species (ROSs) with Fe/Fe3C@NC sample. For Fe/Fe3N@NC sample, the main ROSs are changed into sulfate radicals (SO4-) and high valent iron-oxo (Fe (IV)=O) species. In addition, the better conductivity of Fe3C is beneficial for the electron transfer from Fe0 to the Fe3C, thus could keep the activity of the surface sites and obtain better stability. DFT calculation reveals the better adsorption and activation ability of Fe3C than Fe3N. Moreover, PMS can also be adsorbed on the Fe sites of Fe3N with shorter FeO bonds and longer SO bonds than on Fe3C, the Fe (IV)=O is thus present in the Fe/Fe3N@NC/PMS system. This study provides a novel strategy for the development of highly active Fe-based materials for Fenton-like reactions and thus could promote their real application.

Tuning electronic structure of metal-free dual-site catalyst enables exclusive singlet oxygen production and in-situ utilization

Developing eco-friendly catalysts for effective water purification with minimal oxidant use is imperative. Herein, we present a metal-free and nitrogen/fluorine dual-site catalyst, enhancing the selectivity and utilization of singlet oxygen (1O2) for water decontamination. Advanced theoretical simulations reveal that synergistic fluorine-nitrogen interactions modulate electron distribution and polarization, creating asymmetric surface electron configurations and electron-deficient nitrogen vacancies. These properties trigger the selective generation of 1O2 from peroxymonosulfate (PMS) and improve the utilization of neighboring reactive oxygen species, facilitated by contaminant enrichment at the fluorine-carbon Lewis-acid adsorption sites. Utilizing these insights, we synthesize the catalyst through montmorillonite (MMT)-assisted pyrolysis (NFC/M). This method leverages the role of MMT as an in-situ layer-stacked template, enabling controlled decomposition of carbon, nitrogen, and fluorine precursors and resulting in a catalyst with enhanced structural adaptability, reactive site accessibility, and mass-transfer capacity. The NFC/M demonstrates an impressive 290.5-fold increase in phenol degradation efficiency than the single-site analogs, outperforming most of metal-based catalysts. This work not only underscores the potential of precise electronic and structural manipulations in catalyst design but also advances the development of efficient and sustainable solutions for water purification.

Sulfate radical dominated rapid pollutants degradation leaded by selenium vacancies in core-shell N-doped carbon wrapped cobalt diselenide nanospheres

Herein, a new heterogeneous CoSe2-x@NC material with abundant selenium vacancies is synthesized via an in-situ carbonization-selenization process from cobaltic metal organic framework (Co-MOF). The obtained CoSe2-x@NC has a unique electronic structure and rich active sites, which can activate peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) with superior catalytic performance and stability. The quenchingexperiments and EPR test show that SO4•- is the dominant reactive oxidation species (ROSs) for CBZ degradation. Significantly, systemic electrochemical tests and theoretical calculations illustrated that the dominant role of SO4•- is attributed to the existence of abundant selenium vacancies in CoSe2-x@NC, which can adjust the density of electron cloud of the Co atoms in CoSe2-x@NC to improve the PMS adsorption and promoting the conversion of transition metallic redox pairs (Co3+/Co2+). This work provides a facile way to improve the activity and stability of CoSe2 by defect engineering in the PMS based advanced oxidation process (AOPs).

Mechanism of directed activation of peroxymonosulfate by Fe-N/O unsymmetrical coordination-modulated polarized electric field

Iron-nitrogen co-doped carbon materials as heterogeneous catalysts have attracted much attention in advanced oxidation processes involving peroxymonosulfate (PMS) due to their unique structure and enormous catalytic potential. However, there is limited research on the influence of different coordination structures on the central iron atoms. Through simple pyrolysis, we introduced oxygen atoms into the Fe-N coordination structure, constructing Fe-N/O@C catalysts with Fe-N2O2 coordination structure, and achieved efficient degradation of bisphenol A (BPA). Quenching experiments, electron paramagnetic resonance, and electrochemical analysis indicate that compared to the free radical activation pathway of Fe-N@C, high-valent iron-oxo species (≡Fe(Ⅳ) = O) are the main reactive oxygen species (ROS) in the Fe-N/O@C/PMS system. Meanwhile, we compared the differences in the oxidation states of Fe atoms and electron density in different coordination structures, revealing the formation of high-valent iron-oxo species and the mechanism of interfacial electron transfer. Therefore, this study provides new insights into the design and development of Fe-N co-doped catalysts for resource-efficient and environmentally friendly catalytic oxidation systems.

Fe-N co-doped biochar derived from biomass waste triggers peracetic acid activation for efficient water decontamination

In this study, the porous carbon material (FeN-BC) with ultra-high catalytic activity was obtained from waste biomass through Fe-N co-doping. The prominent degradation rate (> 96.8%) of naproxen (NAP) was achieved over a wide pH range (pH 3.0-9.0) in FeN-BC/PAA system. Unlike previously reported iron-based peracetic acid (PAA) systems with •OH or RO• as the dominated reactive species, the degradation of contaminants was attributed to singlet oxygen (1O2) produced by organic radicals (RO•) decomposition, which was proved to be thermodynamically feasible and favorable by theoretical calculations. Combining the theoretical calculations, characteristic and experimental analysis, the synergistic effects of Fe and N were proposed and summarized as follows: i) promoted the formation of extensive defects and Fe0 species that facilitated electron transfer between FeN-BC and PAA and continuous Fe(II) generation; ii) modified the specific surface area (SSA) and the isoelectric point of FeN-BC in favor of PAA adsorption on the catalyst surface. This study provides a strategy for waste biomass reuse to construct a heterogeneous catalyst/PAA system for efficient water purification and reveals the synergistic effects of typical metal-heteroatom for PAA activation.

Insights into the efficient water treatment over N-doped carbon nanosheets with layered minerals as template: The role of interfacial electron tunneling and transfer

Peroxymonosulfate (PMS) oxidation reactions have been extensively studied recently. Due to the high material cost and low catalytic capability, PMS oxidation technology cannot be effectively applied in an industrial water treatment process. In this work, we developed a modification strategy based on enhancing the neglected electron tunneling effect to optimize the intrinsic electron transport process of the catalyst. The 2D nitrogen-doped carbon-based nanosheets with small interlayer spacing were prepared by self-polymerization of dopamine hydrochloride inserted into the natural layered bentonite template. Systematic characterizations confirmed that the smaller layer spacing in the 2D nitride-doped carbon-based nanosheets reduces the depletion layer width. The weak electronic shielding effect derived by the small layer spacing on the material subsurface enhanced the bulk electron tunneling effect. More bulk electrons could be migrated to the catalyst surface to activate PMS molecules. The PMS activation system showed ultrafast oxidation capability to degrade organic pollutants and strong ability to resist interference from environmental matrixes due to the optimized electron transfer process. Furthermore, the developed membrane reactor exhibited strong catalytic stability during the continuous degradation of P-Chlorophenol (CP).

Switching reactive oxygen species reactions derived from Mn-Pt anchored zeolite for selective catalytic ozonation

Rationally switching reactive oxygen species (ROS) reactions in advanced oxidation processes (AOPs) is urgently needed to improve the adaptability and efficiency for the engineering application. Herein we synthesized bimetallic Mn-Pt catalysts based on zeolite to realize the switching of ROS reactions in catalytic ozonation for sustainable degradation of organic pollutants from water. The ROS reactions switched from singlet oxygen (1O2, 71.01%) to radical-dominated (93.79%) pathway by simply introducing defects and changing Pt/Mn ratios. The oxygen vacancy induced by anchoring Mn-Pt species from zeolite external surface (MnPt/H-Beta) to internal framework (MnPt@Si-Beta) exposes more electron-rich Pt2+/Pt4+ redox sites, accelerating the decomposition of O3 to generate •OH via electron transfer and switching ROS reactions. The Mn site acted as a bridge plays a critical role in conducting electrons from organic pollutants to Pt sites, which solidly solves the electron loss of catalysts, facilitating the efficient degradation of pollutants. A 34.7-fold increase in phenol degradation compared with the non-catalytic ozonation and an excellent catalytic stability are achieved by MnPt@Si-Beta/O3. The 1O2-dominated ROS reaction originated from MnPt/H-Beta/O3 exhibits superior performances in anti-interference for Cl-, HCO3-, NO3-, and SO4-. This work establishes a novel strategy for switching ROS reactions to expand the targeted applications of O3 based AOPs for environmental remediation.

Synthesis of stabilized zero-valent iron particles and role investigation of humic acid-Fex+ shell in Fenton-like reactions and surface stability control

Herein, a novel humic acid-Fex+ complex-coated ZVI (HA-Fex+@ZVI) was synthesized and used to activate peroxydisulfate (PDS) for phenol degradation. The HA-Fex+ shell selectively reacted with PDS rather than O2, leading to the formation of modified ZVI with excellent surface stability in storage and ultraefficient PDS activation in advanced oxidation processes (AOPs). As a result, the phenol degradation and PDS activation efficiencies of HA-Fex+@ZVI/PDS were ∼14.4 and ∼1.8 times higher than those of ZVI/PDS, respectively. Mechanistic explorations revealed that the replacement of the HA-Fex+ shell relative to the original passivation layer of ZVI greatly changed the SO4•- generation pathway from a heterogeneous process to a homogeneous process, resulting from the slow exposure of Fe0 (generating dissolved Fe2+) and the depolymerized HA (enhancing the Fe3+/Fe2+ cycle). Based on experimental analysis and density functional theory (DFT) calculations, the Fe3+ in HA-Fex+ could be reduced to Fe2+ by PDS, resulting in the disintegration of the HA-Fex+ shell and exposure of Fe0 core active sites. Furthermore, compared to similar catalysts synthesized with commercial HA and traditional chemicals, HA-Fex+@ZVI synthesized with multiple waste biomasses exhibited better performance. This research provides valuable insights for designing ZVI-based catalysts with excellent storage stability and ultraefficient PDS catalytic activity for AOPs.

Atomically Dispersed Fe-N4 Site as a Conductive Bridge Enables Efficient and Stable Activation of Peroxymonosulfate: Active Site Renewal, Anti-Oxidative Capacity, and Pathway Alternation Mechanism

Atomically dispersed metal sites anchored on nitrogen-doped carbonaceous substrates (M-NCs) have emerged as promising alternatives to conventional peroxymonosulfate (PMS) activators; however, the exact contribution of each site still remains elusive. Herein, isolated Fe-N4 active site-decorated three-dimensional NC substrates (FeSA-NC) via a micropore confinement strategy are fabricated to initiate PMS oxidation reaction, achieving a specific activity of 5.16 × 103 L·min-1·g-1 for the degradation of bisphenol A (BPA), which outperforms most of the state-of-the-art single-atom (SA) catalysts. Mechanism inquiry reveals enhanced chemisorption and electron transfer between PMS and FeSA-NC, enabling an inner electron shuttle mechanism in which Fe-N4 serves as a conductive bridge. The Fe-N4 sites reduce the energy barrier for the formation of SO5* and H*, thereby transforming the reaction pathway from directly adjacent electron transfer into reactive oxygen species (ROS)-dominated oxidation. Theoretical calculations and dynamic simulations reveal that the Fe-N4 sites induce facilitated desorption of reaction intermediates (PMS*/BPA*), which collectively contribute to the renewal of active sites and eventually enhance the catalytic durability. This work offers a reasonable interpretation for the important role of the Fe-N4 moiety in altering the activation mechanism and enhancing the antioxidative capacity of NC materials, which fundamentally furnishes theoretical support for SA material design.

Ultrafast and energy-saving microwave-assisted conversion of inert carbon nanomaterials to highly efficient Fenton-like metal-free catalysts for pollutants degradation

Carbon-driven persulfate (PDS)-based Fenton-like reactions have been widely viewed as prospective strategies to cope with the water pollution. However, high cost, harsh condition and complex modification processes are usually required to boost the catalytic activities of carbocatalysts. Herein, we proposed an ultrafast, energy-efficient, and convenient approach to convert various low-performance carbon materials into highly efficient catalysts by microwave treatment in just 1 min without any other tedious treatment. This process only requires 57 kJ/g energy input, 5 orders of magnitude lower than the traditional calcination process. The catalytic performance of microwave-treated materials could increase by more than 380 times, which is even better than those of the single-atom catalysts. Moreover, DFT calculations and QSARs analyses reveal that the negatively charged carboxyl group is not conducive to the adsorption of PDS (S2O82-) due to electrostatic repulsion, and also increases the work function of the carbocatalysts, which hinders the electron transfer process.

Site Engineering of Covalent Organic Frameworks for Regulating Peroxymonosulfate Activation to Generate Singlet Oxygen with 100 % Selectivity

Singlet oxygen (1 O2 ) is an excellent reactive oxygen species (ROSs) for the selective conversion of organic matter, especially in advanced oxidation processes (AOPs). However, due to the huge dilemma in synthesizing single-site type catalysts, the control and regulation of 1 O2 generation in AOPs is still challenging and the underlying mechanism remains largely obscure. Here, taking advantage of the well-defined and flexibly tunable sites of covalent organic frameworks (COFs), we report the first achievement in precisely regulating ROSs generation in peroxymonosulfate (PMS)-based AOPs by site engineering of COFs. Remarkably, COFs with bipyridine units (BPY-COFs) facilitate PMS activation via a nonradical pathway with 100 % 1 O2 , whereas biphenyl-based COFs (BPD-COFs) with almost identical structures activate PMS to produce radicals (⋅OH and SO4 .- ). The BPY-COFs/PMS system delivers boosted performance for selective degradation of target pollutants from water, which is ca. 9.4 times that of its BPD-COFs counterpart, surpassing most reported PMS-based AOPs systems. Mechanism analysis indicated that highly electronegative pyridine-N atoms on BPY-COFs provide extra sites to adsorb the terminal H atoms of PMS, resulting in simultaneous adsorption of O and H atoms of PMS on one pyridine ring, which facilitates the cleavage of its S-O bond to generate 1 O2 .

Recent Progress in Multifunctional Graphene-Based Nanocomposites for Photocatalysis and Electrocatalysis Application

The global energy shortage and environmental degradation are two major issues of concern in today's society. The production of renewable energy and the treatment of pollutants are currently the mainstream research directions in the field of photocatalysis. In addition, over the last decade or so, graphene (GR) has been widely used in photocatalysis due to its unique physical and chemical properties, such as its large light-absorption range, high adsorption capacity, large specific surface area, and excellent electronic conductivity. Here, we first introduce the unique properties of graphene, such as its high specific surface area, chemical stability, etc. Then, the basic principles of photocatalytic hydrolysis, pollutant degradation, and the photocatalytic reduction of CO₂ are summarized. We then give an overview of the optimization strategies for graphene-based photocatalysis and the latest advances in its application. Finally, we present challenges and perspectives for graphene-based applications in this field in light of recent developments.

MgxCu-biochar activated peroxydisulfate triggers reductive species for the reduction and enhanced electron-transfer degradation of electron-deficient aromatic pollutants

In wastewater treatment by persulfate-based advanced oxidation processes (PS-AOPs), electron-deficient aromatic pollutants (EDAPs) are refractory to nonradical pathway. To explore an efficient degradation pathway for EDAPs, Mg_xCu-biochar (BC) (x = 0.5, 1, 1.5) activated peroxydisulfate (PDS) was developed, which could trigger reductive species (•H) to reduce EDAPs first, and subsequently facilitate electron-transfer degradation of reduced intermediates. The roles of Mg-doping in Mg_xCu-BC to promote PDS activation and 2,4-dibromophenol (DBP) degradation were investigated. The mechanisms were then explored via electron paramagnetic resonance (EPR), chemical probes and Density Functional Theory (DFT) calculations. The results showed that Mg-doping improved metal-support interactions (MSIs) of Mg_xCu-BC, inducing •H formation via electron transfer from Cu atoms during PDS activation, which was thermodynamically favorable. The degradation rate of DBP (k_obs, 0.0494 min^-1) and Br^- release (5.35 mg L^-1) in Mg₁Cu-BC systems were more 31 and 33 times than that in Cu-BC/PDS system, respectively. The degradation mechanism of •H-enhanced electron transfer processes was that •H attacked one Br group of DBP, and then debrominated intermediates were mineralized by electron transfer processes in the Mg₁Cu-BC/PDS system. Overall, this study reports a novel pathway in PS-AOPs for selective degradation of EDAPs in wastewaters.

Recent Advances in Carbon-Based Electrodes for Energy Storage and Conversion

Carbon-based nanomaterials, including graphene, fullerenes, and carbon nanotubes, are attracting significant attention as promising materials for next-generation energy storage and conversion applications. They possess unique physicochemical properties, such as structural stability and flexibility, high porosity, and tunable physicochemical features, which render them well suited in these hot research fields. Technological advances at atomic and electronic levels are crucial for developing more efficient and durable devices. This comprehensive review provides a state-of-the-art overview of these advanced carbon-based nanomaterials for various energy storage and conversion applications, focusing on supercapacitors, lithium as well as sodium-ion batteries, and hydrogen evolution reactions. Particular emphasis is placed on the strategies employed to enhance performance through nonmetallic elemental doping of N, B, S, and P in either individual doping or codoping, as well as structural modifications such as the creation of defect sites, edge functionalization, and inter-layer distance manipulation, aiming to provide the general guidelines for designing these devices by the above approaches to achieve optimal performance. Furthermore, this review delves into the challenges and future prospects for the advancement of carbon-based electrodes in energy storage and conversion.

Activation Mechanism of a Peroxymonosulfate-based Fenton-like System with Birnessite and Cu2+ Modified Birnessite

The peroxymonosulfate (PMS) activation mechanism is closely related to the structure/configuration of the "active site" of the Fenton-like catalysts. In this paper, it is shown that Cu²⁺ chemically bonds the surface of birnessite at the Mn vacancy site to form triple-corner-sharing inner-sphere surface complexes (Cu-Bir), which regulates the PMS activation mechanism. Birnessite/PMS Fenton-like system degrades phenol via a non-radical mechanism, which involves high valent Mn(V)=O generated from the surface reaction of Mn(III) with adsorbed PMS. While Cu-Bir initiates an additional radical mechanism that involves reactive oxygen species of ⋅O₂ ^- and ¹ O₂ , and the k value of 5Cu-Bir is 1.9 times higher than that of Bir. The Fenton-like reaction mechanism of the Cu-Bir/PMS system is thus proposed as a radical and non-radical cooccurrence mechanism, which involves a synergistic effect that the radical pathway accelerates the regeneration of Mn(III) for the non-radical pathway, and the non-radical pathway assists to produce ¹ O₂ for the radical pathway.

Enhanced redox cycle of Fe3+/Fe2+ on Fe@NC by boron: Fast electron transfer and long-term stability for Fenton-like reaction

In this work, Fe@NC/B material is successfully synthesized and in-situ supported on the surface of amorphous boron (B) using a simple pyrolysis method. The interface between Fe species and B is improved by introducing N-doped carbon (NC) layers as intermediate, fast electron transfer from B to Fe@NC can therefore be achieved, thus could promote the fast redox cycle of Fe³⁺/Fe²⁺. The obtained material can therefore activate peroxymonosulfate (PMS) effectively to degrade Bisphenol A (BPA), a fast degradation rate and a very long lifetime in a continous tubular reactor are realized. Moreover, experiments and DFT calculation indicate that Fe²⁺ containing species are the dominated active sites, while the exposed B atoms and structure defect of B can also activate PMS directly to produce SO₄^•- and ¹O₂ species for BPA degradation. In addition, boric acid is the oxidation product of B, which can be dissolved into the aqueous solution and expose fresh B species again for PMS activation. The combination of B with Fe@NC provide novel materials for long term PMS activation, thus could promote the real application of persulfates on an industrial scale.

Carbonyl and defect of metal-free char trigger electron transfer and O2- in persulfate activation for Aniline aerofloat degradation

Residual flotation reagents in mineral processing wastewater can trigger severe ecological threats to the local groundwater if they are discharged without treatment. Metal-free biochar-induced persulfate-advanced oxidation processes (KCBC/PS) were used in this study to elucidate the degradation of aniline aerofloat (AAF) - a typical flotation reagent. In KCBC/PS system, AAF can be removed at low doses of catalyst (KCBC, 0.05 g/L) and oxidant (PS, 0.3 mM) additions with high efficiency. The analysis revealed the dominance of O₂^•- among the identified reactive oxygen species (ROS), which achieved deeper mineralization for the AAF degradation in the KCBC/PS system. The role of the electron transfer mechanism was equally important; the importance was corroborated by the chemical quenching experiments, electron spin resonance (ESR) detection, probe experiments, and electrochemical analysis. It benefited from the electron transfer mechanism in the KCBC/PS system and exhibited a wide pH adaptation (3.5-11) and high resistance to inorganic anions for real mining wastewater treatment. Combined with theoretical calculations and other analyses, the carbonyl group was deemed to be the active site of the non-radical pathway of biochar, while the site of the conversion of SO₄^•- to superoxide radicals by biochar activation represented a defect. These findings revealed a synergistic effect of multiple active sites on PS activation in biochar-based materials. Moreover, the intermediate degradation products of AAF from mass spectrometry indicated a possible pathway through the density functional theory (DFT) method, which was effective in reducing the environmental toxicity of pollutants for the first time according to the T.E.S.T software and seed germination experiments. Overall, our study proposed a novel modification strategy for cost-effective and environmentally friendly biochar-based catalysts, while also deepening our understanding of the mechanism of activation of persulfate by metal-free carbon-based materials.

2D MOF derived cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets for efficient Fenton-like catalysis: Tuning effect of oxygen functional groups in close vicinity to Co-N sites

Developing highly efficient catalysts for peroxymonosulfate (PMS) activation is an important issue in advanced oxidation processes (AOPs) technology. In this work, cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets derived from 2D metal-organic framework (MOF) were successfully fabricated. The as-prepared catalyst can effectively degrade tetracycline (TC) with a high reaction constant (0.088 min^-1). Quenching test, electron paramagnetic resonance (EPR) technology, and the electrochemical test indicate that the radical pathway plays a minor role in the degradation process, the ¹O₂ based nonradical pathway dominates the reaction. Experimental and density functional theory (DFT) studies revealed that the Co-N sites on the carbon structure serve as the dominant active sites, and the oxygen functional groups in close vicinity to Co-N sites can dramatically influence local electronic structure and its interaction with PMS molecule, a high correlation between the reaction constant and hydroxy groups content could be due to the Co-N sites close to hydroxyl groups has a moderate PMS adsorption energy. This work provides new insight into the design of highly efficient Fenton-like catalysts.

Metal-free graphene-based catalytic membranes for persulfate activation toward organic pollutant removal: a review

Owing to their ultrathin two-dimensional structure and efficient catalytic ability for persulfate activation, graphene-based nanocarbons exhibit considerable application potential in fabricating carbonaceous composite membranes for in situ catalytic oxidation to remove organic pollutants. This approach offers significant advantages over conventional batch systems. However, the relationships between the physicochemical properties of carbon mats and performance of graphene-based catalytic membranes in water purification remain ambiguous. Herein, we summarize the main mechanisms of in situ catalytic oxidation and the facile fabrication strategies of carbonaceous composite membranes. Different factors influencing the performance of graphene-based catalytic membranes are comprehensively discussed. The defective level, heteroatom doping, and stacking morphology of carbon mats and operational conditions during filtration play critical roles in the oxidative degradation of target pollutants. Long-term operation leads to the deterioration of catalytic activity and transmembrane pressure, especially in the complex water matrix. Finally, the present challenges and future perspectives are presented to improve the anti-fouling performance and catalytic stability of membranes and develop scalable fabrication methods to promote the engineering applications of in situ catalytic oxidation in real water purification.

Catalytic Oxygen Activation over the Defective CuO Nanoparticles for Ultrafast Dehalogenation

The nucleophilic superoxide radical (O₂^•-)-based dehalogenation reaction shows great potential to degrade the toxic halogenated organic compounds (HOCs). But such an O₂^•--mediated reductive reaction often suffers from the competition of the secondary oxidative species (e.g., •OH), leading to inferior electron efficiency and possible disinfection byproduct formation. Here, an O₂^•--dominant ultrafast dehalogenation system is developed via molecular O₂ activation by the oxygen vacancy (OV)-rich CuO nanoparticles (nCuO). The nCuO delivers a remarkable dechlorination rate constant of 3.92 × 10^-2 L min^-1 m^-2 for 2,4-dichlorophenol, much higher than that of the conventional zerovalent (bi)metals. The absorbed O₂ on the nCuO surface is exclusively responsible for O₂^•- generation, and its reactivity increases with the elevated OV content because of the enhanced orbital hybridization between the O p- and Cu d-orbitals. More importantly, the ubiquitous carbonate species firmly bound to the surface OVs block the formation of the secondary oxidative species via H₂O₂ activation, assuring the dominant role of the in situ generated O₂^•- for the selective HOC dehalogenation. The carbonate-deactivated OVs of the nCuO can be feasibly recovered via air annealing for sustainable dehalogenation. This work provides a new opportunity for selective O₂^•- generation via interfacial defect engineering for dehalogenation and other environmental applications.

Insights into the role of dual reaction sites for single Ni atom Fenton-like catalyst towards degradation of various organic contaminants

The trade-off of Fenton-like catalysts in activity and stability remains a challenge in practical remediation applications. In this work, we successfully synthesized an efficient and stable catalyst comprised of single nickel (Ni) atoms dispersed on N-doped porous carbon (named Ni-SAs@CN) through a simple micropore confinement strategy. The catalyst exhibited outstanding catalytic performance with 25.8 min^-1 turnover frequency for peroxymonosulfate (PMS) activation toward degradation of various organic pollutants (e.g., antibiotics, dyes, and plasticizers) in a wide pH range (4.5-10.8). Electron paramagnetic resonance and in situ Raman analyses demonstrated that both radical (including SO₄^•- and ^•OH) and Ni-PMS* dominated nonradical (via electron transfer) pathways played pivotal role in the decomposition of organics. The X-ray adsorption fine structure analysis and computational pieces of evidence demonstrate that the atomically dispersed NiN₄ coordination is the intrinsic catalytic site for PMS activation. Meanwhile, pyrrolic N acts as a functional site to anchor target contaminants to the surface region for oxidation. In this process which is benefited from the dual active sites, the target contaminants were degraded via combined radical and nonradical pathways, which significantly boost the overall oxidation and mineralization kinetics.

Peroxymonosulfate Activation on Synergistically Enhanced Single-Atom Co/Co@C for Boosted Chemiluminescence of Tris(bipyridine) Ruthenium(II) Derivative

Tris(bipyridine) ruthenium(II)-based luminophores have been well developed in the area of electrochemiluminescence, while their applications in chemiluminescence (CL) are rarely studied due to the poor luminous efficiency and complicated CL reaction. Herein, a novel tris(bipyridine) ruthenium(II)-based ternary CL system is proposed by introducing cobalt single atoms integrated with graphene-encapsulated cobalt nanoparticles (Co SAs/Co@C) and peroxymonosulfate (PMS) as advanced coreaction accelerator and promising coreactant, respectively. On the basis of the experimental results and density functional theory calculations, it is concluded that Co@C can synergistically modulate the adsorption behavior of PMS on Co SAs and then efficiently activate PMS to produce massive singlet oxygen for remarkable CL emission. Under the optimum conditions, the as-prepared CL biosensor exhibits a good linear range, excellent sensitivity, and selectivity, holding great potential for the practical detection of prostate-specific antigen in human serum.

Multi-heteroatom-doped carbocatalyst as peroxymonosulfate and peroxydisulfate activator for water purification: A critical review

Catalytic activation of peroxymonosulfate (PMS) and peroxydisulfate (PDS) (or collectively known as persulfate, PS) using carbocatalyst is increasingly gaining attention as a promising technology for sustainable recalcitrant pollutant removal in water. Single heteroatom doping using either N, S, B or P is widely used to enhance the performance of the carbocatalyst for PS activation. However, the performance enhancement from single heteroatom doping is limited by the type of heteroatom used. To further enhance the performance of the carbocatalyst beyond the limit of single heteroatom doping, multi-heteroatom doping can be conducted. This review aims to provide a state-of-the-art overview on the development of multi-heteroatom-doped carbocatalyst for PS activation. The potential synergistic and antagonistic interactions of various heteroatoms including N and B, N and S, N and P, and N and halogen for PS activation are evaluated. Thereafter, the preparation strategies to develop multi-heteroatom-doped carbocatalyst including one-step and multi-step preparation approaches along with the characterization techniques are discussed. Evidence and summary of the performance of multi-heteroatom-doped carbocatalyst for various recalcitrant pollutants removal via PS activation are also provided. Finally, the prospects of employing multi-heteroatom-doped carbocatalyst including the need to study the correlation between different heteroatom combination, surface moiety type, and amount of dopant with the PS activation mechanism, identifying the best heteroatom combination, improving the durability of the carbocatalyst, evaluating the feasibility for full-scale application, developing low-cost multi-heteroatom-doped carbocatalyst, and assessing the environmental impact are also briefly discussed.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Metal-rich hyperaccumulator-derived biochar as an efficient persulfate activator: Role of intrinsic metals (Fe, Mn and Zn) in regulating characteristics, performance and reaction mechanisms

Biochar has been widely used in advanced oxidation processes (AOPs) for the decomposition of organic contaminants. However, the role of intrinsic metals in hyperaccumulator biomass in the physico-chemical properties and performance of peroxodisulfate (PDS) activation by biochar is still unclear. This work employed hyperaccumulator biomass containing Fe, Mn and Zn, respectively. Result showed that as the pyrolysis temperature of the biochar increased, Fe was gradually reduced to iron oxide and Fe⁰, and Zn was reduced and volatilized; however, Mn remained in biochar in the form of MnS and CaMnO₃ with high valence states. These thermochemical behaviors of intrinsic metals also facilitated graphitized structure growth and pore development (for Zn) and persistent free radicals (PFRs) generation (for Mn and Zn) in biochar, and these processes were crucial for imidacloprid degradation in biochar/PDS systems. Moreover, Fe/Zn@PB9/PDS showed better imidacloprid degradation performance, while Mn species in Mn@PB were catalytically inert. In addition, the radical pathway depending on·SO₄^- and·OH was the dominant pathway for imidacloprid degradation in the Fe@PB9/PDS systems, while the·O₂^--mediated ¹O₂ pathway and ¹O₂-based nonradical pathway contributed more in the Zn@PB9/PDS systems. These results reveal the role of intrinsic metals in biochar-based catalysts and provide a reference for the preparation of green and efficient hyperaccumulator-derived biochar catalysts for AOPs.

Origins of Electron-Transfer Regime in Persulfate-Based Nonradical Oxidation Processes

Persulfate-based nonradical oxidation processes (PS-NOPs) are appealing in wastewater purification due to their high efficiency and selectivity for removing trace organic contaminants in complicated water matrices. In this review, we showcased the recent progresses of state-of-the-art strategies in the nonradical electron-transfer regimes in PS-NOPs, including design of metal and metal-free heterogeneous catalysts, in situ/operando characterization/analytical techniques, and insights into the origins of electron-transfer mechanisms. In a typical electron-transfer process (ETP), persulfate is activated by a catalyst to form surface activated complexes, which directly or indirectly interact with target pollutants to finalize the oxidation. We discussed different analytical techniques on the fundamentals and tactics for accurate analysis of ETP. Moreover, we demonstrated the challenges and proposed future research strategies for ETP-based systems, such as computation-enabled molecular-level investigations, rational design of catalysts, and real-scenario applications in the complicated water environment. Overall, this review dedicates to sharpening the understanding of ETP in PS-NOPs and presenting promising applications in remediation technology and green chemistry.

Structure-Function Correlations of Carbonaceous Materials for Persulfate-Based Advanced Oxidation

Carbonaceous materials (CMs), as high-efficiency activators in a persulfate-based advanced oxidation process (PS-AOP), are attracting increasing attention for environmental remediation due to their high efficiency, low toxicity, and environmental friendliness. The correlations between the structural and surface properties of carbonaceous materials and the catalytic reaction efficiency in PS-AOP have been focused on experimentally and theoretically. In this Perspective, we discuss the effect of the microstructure of carbonaceous materials on the catalytic reaction efficiency, which can depend on the reaction pathways, including adsorption, free-radical routines, and non-free-radical pathways. Various features of carbonaceous materials, covering the dimensionality, pristine carbon configuration, crystallinity, defects, porosity, chemically active groups, and heterogeneous doping, can be involved. Those characteristics mainly affect the electronic process and mass transfer during the whole PS-AOP. An important target in the field is how to rationally regulate the intrinsic properties of carbonaceous substances to control both the reaction pathways and catalytic efficiency. Therefore, we conclude with a critical discussion and presentation of future challenges.

Carbon Nitride Supported High-Loading Fe Single-Atom Catalyst for Activating of Peroxymonosulfate to Generate 1 O2 with 100 % Selectivity

Singlet oxygen (¹ O₂ ) is an excellent active species for the selective degradation of organic pollutions. However, it is difficult to achieve high efficiency and selectivity for the generation of ¹ O₂ . In this work, we develop a graphitic carbon nitride supported Fe single-atoms catalyst (Fe₁ /CN) containing highly uniform Fe-N₄ active sites with a high Fe loading of 11.2 wt %. The Fe₁ /CN achieves generation of 100 % ¹ O₂ by activating peroxymonosulfate (PMS), which shows an ultrahigh p-chlorophenol degradation efficiency. Density functional theory calculations results demonstrate that in contrast to Co and Ni single-atom sites, the Fe-N₄ sites in Fe₁ /CN adsorb the terminal O of PMS, which can facilitate the oxidization of PMS to form SO₅ ^.- , and thereafter efficiently generate ¹ O₂ with 100 % selectivity. In addition, the Fe₁ /CN exhibits strong resistance to inorganic ions, natural organic matter, and pH value during the degradation of organic pollutants in the presence of PMS. This work develops a novel catalyst for the 100 % selective production of ¹ O₂ for highly selective and efficient degradation of pollutants.