Boosted Photocatalytic Oxidation of Toluene into Benzaldehyde on CdIn2S4-CdS: Synergetic Effect of Compact Heterojunction and S-Vacancy

Construction of hierarchical In2O3/In2S3-ZnCdS ternary microsphere heterostructures for efficient photocatalytic nitrogen fixation

Photocatalytic ammonia production holds immense promise as an environmentally sustainable approach to nitrogen fixation. In this study, In2O3/In2S3-ZnCdS ternary heterostructures were successfully constructed through an innovative in situ anion exchange process, coupled with a low-temperature hydrothermal method for ZnCdS (ZCS) incorporation. The resulting In2O3/In2S3-ZCS photocatalyst was proved to be highly efficient in converting N2 to NH3 under mild conditions, eliminating the need for sacrificial agents or precious metal catalysts. Notably, the NH4+ yield of In2O3/In2S3-0.5ZCS reached a significant level of 71.2 μmol g-1 h-1, which was 10.47 times higher than that of In2O3 (6.8 μmol g-1 h-1) and 3.22 times higher than that of In2O3/In2S3 (22.1 μmol g-1 h-1). This outstanding performance can be attributed to the ternary heterojunction configuration, which significantly extends the lifetime of photogenerated carriers and enhances the spatial separation of electrons and holes. The synergistic interplay between CdZnS, In2S3, and In2O3 in the heterojunction facilitates electron transport, thereby boosting the rate of the photocatalytic nitrogen fixation reaction. Our study not only validates the efficacy of ternary heterojunctions in photocatalytic nitrogen fixation but also offers valuable insights for the design and construction of such catalysts for future applications.

Dual amplification for PEC ultrasensitive aptasensing of biomarker HER-2 based on Z-scheme UiO-66/CdIn2S4 heterojunction and flower-like PtPdCu nanozyme

As an important prognostic indicator in breast cancer, human epithelial growth factor receptor-2 (HER-2) is of importance for assessing prognosis of breast cancer patients, whose accurate and facile analysis are imperative in clinical diagnosis and treatment. Herein, photoactive Z-scheme UiO-66/CdIn2S4 heterojunction was constructed by a hydrothermal method, whose optical property and photoactivity were critically investigated by a range of techniques, combined by elucidating the interfacial charge transfer mechanism. Meanwhile, PtPdCu nanoflowers (NFs) were fabricated by a simple aqueous wet-chemical method, whose peroxidase (POD)-mimicking catalytic activity was scrutinized by representative tetramethylbenzidine (TMB) oxidation in H2O2 system. Taken together, the UiO-66/CdIn2S4 based photoelectrochemical (PEC) aptasensor was established for quantitative analysis of HER-2, where the detection signals were further magnified through catalytic precipitation reaction towards 4-chloro-1-naphthol (4-CN) oxidation (assisted by the PtPdCu NFs nanozyme). The PEC aptasensor presented a broader linear range within 0.1 pg mL-1-0.1 μg mL-1 and a lower limit of detection of 0.07 pg mL-1. This work developed a new PEC aptasensor for ultrasensitive determination of HER-2, holding substantial promise for clinical diagnostics.

Toluene Oxidation: CO2 vs Benzaldehyde: Current Status and Future Perspectives

Toluene is a common and significant volatile organic compound (VOC). Although it finds extensive application in various industrial processes (chemical manufacturing, paint and adhesive production, and as a solvent), it creates a huge environmental impact when emitted freely into the atmosphere. Two solutions were found to mitigate the emission of this pollutant: the total oxidation to CO2 and H2O and the selective oxidation into benzaldehyde. This review discusses the two main alternatives for tackling this problem: converting the toluene into carbon dioxide by total oxidation or into benzaldehyde by selective oxidation. It presents new catalytic advances, new trends, and the advantages and disadvantages of both methods.

In-situ construction of In2O3/In2S3-CdIn2S4 Z-scheme heterojunction nanotubes for enhanced photocatalytic hydrogen production

Semiconductor photocatalysis was considered as an ideal solution to energy shortages. Herein, a novel ternary In2O3/In2S3-CdIn2S4 (IOSC) nanotube (NTs) photocatalyst was successfully constructed via in situ growth of In2S3 and CdIn2S4 nanosheets onto In2O3 skeleton. It was used for the efficient and stable photo-production of hydrogen from water splitting. The rationally designed IOSC NTs displayed significantly enhanced photocatalytic H2 production under visible light irradiation (≥420 nm), with the highest H2 yield determined to be 2892 μmol·g-1, which is much higher than that of pristine In2S3 and In2O3/In2S3 (IOS) NTs. Cyclic testing has shown that the IOSC2 product remains stable after four cycles of repeated use. The enhanced photocatalytic activity was contributed by its tightly bound tube-nanosheets heterogeneous structure and superior light absorption. Photoelectrons transfer in IOSC2 follows a Z-scheme mechanism, which greatly facilitates its utilization of photogenerated electrons and prevents CdIn2S4 from undergoing photo-corrosion affecting material stability. This work demonstrates the key role of in situ growth in the interface design of ternary heterostructures.

Unveiling Synergetic Photocatalytic Activity from Heterometallic Ti/Ce Clusters

Titanium-oxo clusters, with their robust structure and suitable optical and electronic properties, have been widely investigated as photocatalysts. Heterometallic Ti/M-oxo clusters provide additional tunability and functionality, which enable systematic structure-activity investigations to elucidate the reaction mechanisms and improve the catalyst design. Incorporating cerium into Ti-oxo clusters can provide additional redox (CeIV/CeIII) and oxygen harvesting ability, but to date, only a limited number of structurally defined titanium-cerium (Ti/Ce) clusters have been reported due to their synthetic challenges. Herein, we report the synthesis and photocatalytic properties of two structurally defined Ti/Ce-oxo clusters, Ti8Ce2(BA)16 and Ti9Ce4(BA)20, as well as a TiCe-BA cluster with a calculated formula of Ti20Ce9O36(BA)42. Photocatalytic study of these clusters demonstrates that the amount of Ce3+ species greatly impacts its photocatalytic oxidation performance, and their superior photocatalytic reactivity toward aerobic alcohol oxidation can be contributed to the synergistic effects of the multiple radical species generated upon light absorption. This work represents a significant milestone in the construction of stable Ti/Ce-oxo clusters, enriching the current library of known heterometallic Ti/M-oxo clusters, and providing a series of crystalline materials with great promise of photoluminescence and photovoltaic chemistry.

Metal Sulfide S-Scheme Homojunction for Photocatalytic Selective Phenylcarbinol Oxidation

Metal sulfide-based homojunction photocatalysts are extensively explored with improved photocatalytic performance. However, the construction of metal sulfide-based S-scheme homojunction remains a challenge. Herein, the fabrication of 2D CdIn2S4 nanosheets coated 3D CdIn2S4 octahedra (referred to as 2D/3D n-CIS/o-CIS) S-scheme homojunction photocatalyst is reported by simply adjustment of polyvinyl pyrrolidone amount during the solvothermal synthesis. The formation of S-scheme homojunction within n-CIS/o-CIS is systematically investigated via a series of characterizations, which can generate an internal electric field to facilitate the separation and migration of photogenerated electron-hole pairs. The 2D/3D n-CIS/o-CIS composite exhibits significantly improved photocatalytic activity and stability in the selective oxidation of phenylcarbinol (PhCH2OH) to benzaldehyde (PhCHO) when compared to pure n-CIS and o-CIS samples under visible light irradiation. It is hoped that this work can contribute novel insights into the development of metal sulfides S-scheme homojunction photocatalysts for solar energy conversion.

Triazine Frameworks for the Photocatalytic Selective Oxidation of Toluene

Investigations into the selective oxidation of inert sp3 C-H bonds using polymer photocatalysts under mild conditions have been limited. Additionally, the structure-activity relationship of photocatalysts often remains insufficiently explored. Here, a series of thiophene-based covalent triazine frameworks (CTFs) are used for the efficient and selective oxidation of hydrocarbons to aldehydes or ketones under ambient aerobic conditions. Spectroscopic methods conducted in situ and density functional theory (DFT) calculations revealed that the sulfur atoms within the thiophene units play a pivotal role as oxidation sites due to the generation of photogenerated holes. The effect of photogenerated holes on photocatalytic toluene oxidation was investigated by varying the length of the spacer in a CTF donor-acceptor based photocatalyst. Furthermore, the manipulation of reactive oxygen species was employed to enhance selectivity by weakening the peroxidative capacity. As an illustrative example, this study successfully demonstrated the synthesis of a precursor of the neurological drug AMG-579 using a photocatalytic protocol.

Vacancy Engineering in 2D Transition Metal Chalcogenide Photocatalyst: Structure Modulation, Function and Synergy Application

Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.

Heterogeneous Photocatalytic Strategies for C(sp3 )-H Activation

Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.

Carrier confinement activated explicit solvent dynamic of CdS/BiVO4/H2O and optimized photocatalytic hydrogen evolution performances

Herein, using an electrophoretic deposition strategy, a S-scheme CdS (cubic)/BiVO4 (monoclinic) heterostructured photocatalyst is fabricated. The as-synthesized photocatalysts exhibit high carrier separation efficiency, prominent hydrogen evolution ability and high stability. The results of the detailed density functional theory (DFT) prove that the photogenerated electrons and holes are located in BiVO4 and CdS components, respectively. Besides, an explicit solvent model based on the electron-enriched region in CdS/BiVO4 heterojunction is designed deliberately to investigate the solid/liquid interface issues. Intriguing findings demonstrate that the surface hydrogen diffusing rate in CdS/BiVO4/H2O is faster than that of BiVO4/H2O and is highly associated with the electron-enrich effect, which has a greater capacity to promote water decomposition, the possibility of proton collision and photocatalytic hydrogen evolution. Notably, the H p orbital can participate in the electron-enrich effect during solvation, thus reforming the orbital energy level and activating the HER of the BiVO4 component in the CdS/BiVO4 system.

Water-Resistance-Based S-Scheme Heterojunction for Deep Mineralization of Toluene

Deep mineralization of low concentration toluene (C7 H8 ) is one of the most significant but challenging reactions in photocatalysis. It is generally assumed that hydroxyl radicals (⋅OH) as the main reactive species contribute to the enhanced photoactivity, however, it remains ambiguous at this stage. Herein, a S-scheme ZnSn(OH)6 -based heterojunction with AlOOH as water resistant surface layer is in situ designed for tuning the free radical species and achieving deep mineralization of C7 H8 . By employing a combination of in situ DRIFTS and materials characterization techniques, we discover that the dominant intermediates such as benzaldehyde and benzoic acid instead of toxic phenols are formed under the action of holes (h+ ) and superoxide radicals (⋅O2 - ). These dominant intermediates turn out to greatly decrease the ring-opening reaction barrier. This study offers new possibilities for rationally tailoring the active species and thus directionally producing dominant intermediates via designing water resistant surface layer.

Sulfur vacancy-enhanced In2S3-x hollow microtubes for photocatalytic Cr (VI) and tetracycline removal

Morphological regulation and defect engineering are efficient methods for photocatalytic technology by improving photon absorption and electron dissociation. Herein, In2S3-x hollow microtubes with S-vacancies (MIS) were fabricated via a simple solvothermal reaction using In-based metal-organic frameworks (In-MOFs) as a precursor. Experimental results demonstrate that the hollow structure and optimal S-vacancies can jointly accelerate the photocatalytic reaction, attributed to a larger specific surface area, more active sites, and faster electron transfer efficiency. The champion MIS(2) displayed significantly better photocatalytic activity for Cr(VI) reduction and tetracycline (TC) degradation. The Cr(VI) reduction rate by MIS(2) is 3.67 and 2.82 times higher than those of optimal In2S3 template-free (HIS(2)) and MIS(1) with poor S-vacancies, respectively. The removal efficiency of TC by MIS(2) is 1.37 and 1.15 times higher than those of HIS(2) and MIS(1). Further integration of MIS(2) with aerogel simplifies the recovery process significantly.

Atomically isolated Sb(CN)3 on sp2-c-COFs with balanced hydrophilic and oleophilic sites for photocatalytic C-H activation

Activation of carbon-hydrogen (C-H) bonds is of utmost importance for the synthesis of vital molecules. Toward achieving efficient photocatalytic C-H activation, our investigation revealed that incorporating hydrophilic C≡N-Sb(CN)3 sites into hydrophobic sp2 carbon-conjugated covalent organic frameworks (sp2-c-COFs) had a dual effect: It simultaneously enhanced charge separation and improved generation of polar reactive oxygen species. Detailed spectroscopy measurements and simulations showed that C≡N-Sb(CN)3 primarily functioned as water capture sites, which were not directly involved in photocatalysis. However, the potent interaction between water molecules and the Sb(CN)3-modified framework notably enhanced charge dynamics in hydrophobic sp2-c-COFs. The reactive species ·O2- and ·OH (ad) subsequently combined with benzyl radical, leading to the formation of benzaldehyde, benzyl alcohol, and lastly benzyl benzoate. Notably, the Sb(CN)3-modified sp2-c-COFs exhibited a 54-fold improvement in reaction rate as compared to pristine sp2-c-COFs, which achieved a remarkable 68% conversion rate for toluene and an 80% selectivity for benzyl benzoate.

New visible-light-driven Bi2MoO6/Cs3Sb2Br9 heterostructure for selective photocatalytic oxidation of toluene to benzaldehyde

Herein, new Bi2MoO6/Cs3Sb2Br9 heterostructure (BiMo/CSB) was investigated for the first time as a visible-light-driven photocatalyst for C(sp3)-H bond activation using molecular oxygen as a green oxidant and toluene as a model substrate. The optimized BiMo/CSB photocatalyst exhibited enhanced toluene oxidation activity (2,346 μmol g-1h-1), which was almost two- and five-fold that of pristine CSB (1,165 μmol g-1h-1) and BiMo (482 μmol g-1h-1), respectively. The improved photocatalytic performance was essentially attributed to the formation of staggered band energy lineup in the BiMo/CSB hybrid, which promoted S-scheme charge transfer across the BiMo/CSB heterointerface as supported by ultraviolet photoelectron spectroscopy (UPS), density functional theoretical (DFT), time-resolve photoluminescence (TRPL), and photoelectrochemical studies. Spin-trapping electron paramagnetic resonance (EPR) and radical scavenging studies revealed that photoinduced hole, molecular oxygen, and superoxide radical are key active species in this photocatalytic system. The developed BiMo/CSB catalyst provided good selectivity toward benzaldehyde product (94-98 %), presumably due to the inhibiting effect of benzyl alcohol on benzaldehyde oxidation. No significant change in structure and morphology was observed for the spent catalyst, however small negative shift of Sb 3d and Bi 4f binding energy was found suggesting partial reduction of Sb3+ and Bi3+. This work not only provides a new visible-light-driven photocatalyst for C(sp3)-H bond activation but also opens the doors for exploitation of the conversion and functionalization of this inert bond toward the production of high value-added organic chemicals.

Single-Atoms on Crystalline Carbon Nitrides for Selective C─H Photooxidation: A Bridge to Achieve Homogeneous Pathways in Heterogeneous Materials

Single-atom catalysis is a field of paramount importance in contemporary science due to its exceptional ability to combine the domains of homogeneous and heterogeneous catalysis. Iron and manganese metalloenzymes are known to be effective in C─H oxidation reactions in nature, inspiring scientists to mimic their active sites in artificial catalytic systems. Herein, a simple and versatile cation exchange method is successfully employed to stabilize low-cost iron and manganese single-atoms in poly(heptazine imides) (PHI). The resulting materials are employed as photocatalysts for toluene oxidation, demonstrating remarkable selectivity toward benzaldehyde. The protocol is then extended to the selective oxidation of different substrates, including (substituted) alkylaromatics, benzyl alcohols, and sulfides. Detailed mechanistic investigations revealed that iron- and manganese-containing photocatalysts work through a similar mechanism via the formation of high-valent M═O species. Operando X-ray absorption spectroscopy (XAS) is employed to confirm the formation of high-valent iron- and manganese-oxo species, typically found in metalloenzymes involved in highly selective C─H oxidations.

Surface-Controlled CdS/Ti3 C2 MXene Schottky Junction for Highly Selective and Active Photocatalytic Dehydrogenation-Reductive Amination

Photocatalytic valorization and selective transformation of biomass-derived platform compounds offer great opportunities for efficient utilization of renewable resources under mild conditions. Here, the novel three-dimensional hierarchical flower-like CdS/Ti3 C2 Schottky junction (MCdS) composed of surface-controlled CdS and pretreated Ti3 C2 MXene is created for photocatalytic dehydrogenation-reductive amination of biomass-derived amino acid production under ambient temperature with unprecedented activity and selectivity. Schottky junction efficiently promotes photoexcited charge migration and separation and inhibits photogenerated electron-hole recombination, which results in a super-high activity. Meanwhile, CdS with the reduced surface energy supplies sufficient hydrogen sources for imine reduction and induces the preferential orientation of alanine, thus contributing superior selectivity. Moreover, a wide range of hydroxyl acids are successfully converted into corresponding amino acids and even one-pot conversion of glucose to alanine is easily achieved over MCdS. This work illustrates the mechanism of crystal orientation control and heterojunction construction in controlling catalytic behavior of photocatalytic nanoreactor, providing a paradigm for construction of MXene-based heterostructure.

Plasmon-Induced Radical-Radical Heterocoupling Boosts Photodriven Oxidative Esterification of Benzyl Alcohol over Nitrogen-Doped Carbon-Encapsulated Cobalt Nanoparticles

Selective oxidation of alcohols under mild conditions remains a long-standing challenge in the bulk and fine chemical industry, which usually requires environmentally unfriendly oxidants and bases that are difficult to separate. Here, a plasmonic catalyst of nitrogen-doped carbon-encapsulated metallic Co nanoparticles (Co@NC) with an excellent catalytic activity towards selective oxidation of alcohols is demonstrated. With light as only energy input, the plasmonic Co@NC catalyst effectively operates via combining action of the localized surface-plasmon resonance (LSPR) and the photothermal effects to achieve a factor of 7.8 times improvement compared with the activity of thermocatalysis. A high turnover frequency (TOF) of 15.6 h-1 is obtained under base-free conditions, which surpasses all the reported catalytic performances of thermocatalytic analogues in the literature. Detailed characterization reveals that the d states of metallic Co gain the absorbed light energy, so the excitation of interband d-to-s transitions generates energetic electrons. LSPR-mediated charge injection to the Co@NC surface activates molecular oxygen and alcohol molecules adsorbed on its surface to generate the corresponding radical species (e.g., ⋅O2 - , CH3 O⋅ and R-⋅CH-OH). The formation of multi-type radical species creates a direct and forward pathway of oxidative esterification of benzyl alcohol to speed up the production of esters.

Dual sulfur defect engineering of Z-scheme heterojunction on Ag-CdS1-x@ZnIn2S4-x hollow core-shell for ultra-efficient selective photocatalytic H2O2 production

Photocatalytic production of hydrogen peroxide (H₂O₂) using sunlight as an energy source, water and molecular oxygen as feedstock is considered as a green and sustainable promising strategy to solve the energy and environmental crisis. Despite significant improvements in photocatalyst design tuning, however, the relatively low photocatalytic H₂O₂ productivity is still far from satisfactory. Herein, we developed a multi-metal composite sulfide (Ag-CdS_1-x@ZnIn₂S_4-x) with double S vacancies and hollow core-shell Z-type heterojunction structure for H₂O₂ generation by a simple hydrothermal method. The unique hollow structure improves the utilization of light source. The existence of Z-type heterojunction promotes the spatial separation of carriers, and the core-shell structure increases the interface area and active sites. Under visible light irradiation, Ag-CdS_1-x@ZnIn₂S_4-x had a high hydrogen peroxide yield of 1183.7 μmol h^-1 g^-1, which was 6 times that of CdS. The electron transfer number (n = 1.53) obtained from the Koutecky-Levuch plot and DFT calculation confirm that the presence of dual disulfide vacancies provides good selectivity of 2e^- O₂ reduction to H₂O₂. This work provides new insights into the regulation of highly selective two-electron photocatalytic H₂O₂ production, and also provides new ideas for the design and development of highly active energy conversion photocatalysts.

Simultaneous photocatalytic tetracycline oxidation and Cr(VI) reduction by a 0D/3D hierarchical Bi2WO6@CoO Z-scheme heterostructure: In situ interfacial engineering and charge regulation mechanism

Constructing visible-light driven semiconductor heterojunction with high redox bifunctional characteristics is a promising approach to deal with the increasingly serious environmental pollution problems, especially the coexistence of organic/heavy metal pollutants. Herein, a simple in-situ interfacial engineering strategy for the fabrication of 0D/3D hierarchical Bi₂WO₆@CoO (BWO) heterojunction with an intimate contact interface was successfully developed. The superior photocatalytic property was reflected not only in individual tetracycline hydrochloride (TCH) oxidation or Cr(VI) reduction, but also in their simultaneous redox reaction, which could be predominantly attributed to the outstanding light-harvesting, high carrier separation efficiency and enough redox potentials. In the simultaneous redox system, TCH acted as a hole-scavenger for Cr(VI) reduction, replacing the additional reagent. Interestingly, superoxide radical (·O₂^-) played the role as oxidants in TCH oxidation but as electron transfer media in Cr(VI) reduction. On account of the interlaced energy band and tight interfacial contact, a direct Z-scheme charge transfer model was established, which was verified by the active species trapping experiments, spectroscopy, and electrochemical tests. This work provided a promising strategy for the design/fabrication of highly efficient direct Z-scheme photocatalysts in environmental remediation.

Interfacial intimacy and internal electric field modulated S-scheme Sv-ZnS/ZnIn2S4 photocatalyst for efficient H2 evolution and CO2 reduction

The construction of S-scheme heterojunctions is an effective approach to realize artificial photocatalytic processes. For the higher solar energy conversion efficiency, current research focuses on improving the interfacial intimacy and precisely modulating the strength of the internal electric field (IEF). To address this issue, we propose a novel MOF-based synthesis and derivation strategy. The heterojunction obtained by this strategy tends to form an intimate interface and a tunable IEF, which facilitates the transfer and separation of photogenerated carriers. Herein, a ZnS/ZnIn₂S₄ (ZIS) S-Scheme heterojunction containing sulfur vacancies (Sv) was successfully synthesized, and its good photocatalytic hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂RR) activity confirmed the feasibility of this strategy. The prepared Sv-ZnS/ZIS exhibits an apparent quantum yield of 19.8 ± 1.0 % at 420 nm and a hydrogen evolution rate of 2912.3 ± 185.9 μmol g^-1h^-1, which is 9.0 and 33.6 times higher than pure ZIS and Sv-ZnS, respectively. Furthermore, the yield of photoreduction CO₂ to CO reaches 2075.7 ± 63.0 μmol g^-1h^-1 with a CO selectivity of 93.0 ± 0.8 %. This work provides new sights for the rational design and construction of S-scheme photocatalysts with sulfur vacancies for efficient photocatalysis.

Dual Charge-Transfer Channels Harmonize Carrier Separation for Efficient U(VI) Photoreduction

The low efficient transfer of photogenerated electrons to an active catalytic site is a pivotal problem for the photoreduction of highly soluble hexavalent uranium [U(VI)] to low soluble tetravalent uranium [U(IV)]. Herein, we successfully synthesized a TiO_2-x/1T-MoS₂/reduced graphene oxide heterojunction (T_2-xTMR) with dual charge-transfer channels by exploiting the difference in Fermi levels between the heterojunction interfaces, which induced multilevel separation of photogenerated carriers. Theoretical and experimental results demonstrate that the presence of the electron buffer layer promoted the efficient migration of photogenerated electrons between the dual charge-transfer channels, which achieved effective separation of photogenerated carriers in physical/spatial dimensions and significantly extended the lifetime of photogenerated electrons. The migration of photogenerated electrons to the active catalytic site after multilevel spatial separation enabled the T_2-xTMR dual co-photocatalyst to remove 97.4% of the high concentration of U(VI) from the liquid-phase system within 80 min. This work provides a practical reference for utilizing multiple co-catalysts to accomplish directed spatial separation of photogenerated carriers.

Interfacial engineering of Ti3C2 MXene/CdIn2S4 Schottky heterojunctions for boosting visible-light H2 evolution and Cr(VI) reduction

Developing efficient heterojunction photocatalysts that have a high charge carrier separation rate and improved light-harvesting capacity is a crucial step in solving energy crisis and reducing environmental pollution. Herein, we synthesized few-layered Ti₃C₂ MXene sheets (MXs) by a manual shaking process, and combined with CdIn₂S₄ (CIS) to construct novel Ti₃C₂ MXene/CdIn₂S₄ (MXCIS) Schottky heterojunction through a solvothermal method. The strong interface between two-dimensional (2D) Ti₃C₂ MXene and 2D CIS nanoplates led to enhanced light-harvesting capacity and promoted charge separation rate. Additionally, the presence of S vacancies on the MXCIS surface helped to trap free electrons. The optimal sample, 5-MXCIS (with 5 wt% MXs loading), exhibited outstanding performance for photocatalytic hydrogen (H₂) evolution and Cr(VI) reduction under visible light due to the synergistic effect of enhanced light-harvesting capacity and charge separation rate. The charge transfer kinetics was thoroughly studied using multiple techniques. The reactive species of ^•O₂^-, ^•OH and h⁺ were generated in 5-MXCIS system, and e^- and ^•O₂^- radicals were found to be the main contributors to Cr(VI) photoreduction. Based on the characterization results, a possible photocatalytic mechanism for H₂ evolution and Cr(VI) reduction was proposed. On the whole, this work provides new insights into the design of 2D/2D MXene-based Schottky heterojunction photocatalysts for boosting photocatalytic efficiency.

Revealing Photocatalytic Performance of ZnxCd1-xS Nanoparticles Depending on the Irradiation Wavelength

Photocatalysts are useful for various applications, including the conservation and storage of energy, wastewater treatment, air purification, semiconductors, and production of high-value-added products. Herein, Zn_xCd_1-xS nanoparticle (NP) photocatalysts with different concentrations of Zn²⁺ ions (x = 0.0, 0.3, 0.5, or 0.7) were successfully synthesized. The photocatalytic activities of Zn_xCd_1-xS NPs varied with the irradiation wavelength. X-ray diffraction, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and ultraviolet-visible spectroscopy were used to characterize the surface morphology and electronic properties of the Zn_xCd_1-xS NPs. In addition, in situ X-ray photoelectron spectroscopy was performed to investigate the effect of the concentration of Zn²⁺ ions on the irradiation wavelength for photocatalytic activity. Furthermore, wavelength-dependent photocatalytic degradation (PCD) activity of the Zn_xCd_1-xS NPs was investigated using biomass-derived 2,5-hydroxymethylfurfural (HMF). We observed that the selective oxidation of HMF using Zn_xCd_1-xS NPs resulted in the formation of 2,5-furandicarboxylic acid via 5-hydroxymethyl-2-furancarboxylic acid or 2,5-diformylfuran. The selective oxidation of HMF was dependent on the irradiation wavelength for PCD. Moreover, the irradiation wavelength for the PCD depended on the concentration of Zn²⁺ ions in the Zn_xCd_1-xS NPs.

Electrochemical oxidation of styrene to benzaldehyde by discrimination of spin-paired π electrons

The oxidation of styrene to benzaldehyde has been a considerable challenge in the electrochemical synthesis of organic compounds because styrene is more easily oxidized to benzoic acid. In this work, MnO₂ with an asymmetric electronic configuration is designed to discriminate the spin-paired π electrons of styrene. One of these discriminated π electrons combined with reactive oxygen species (ROS), ˙OH, ˙OOH, etc., produced simultaneously on a MnO₂/(Ru_0.3Ti_0.7)O₂/Ti bifunctional anode, to form benzaldehyde via Grob fragmentation, rather than benzoic acid. However, only benzoic acid is obtained from the oxidation of styrene on the anodes MOs/(Ru_0.3Ti_0.7)O₂/Ti, where MOs are other metal oxides with symmetric electronic configurations.

Ultrafast charge separation in a WC@C/CdS heterojunction enables efficient visible-light-driven hydrogen generation

The rapid recombination of photogenerated carriers and strong photocorrosion have considerably limited the practical application of CdS in the field of photocatalysis. Loading a cocatalyst has been widely utilized to largely enhance photocatalytic activity. In the present work, a WC@C cocatalyst was prepared by a novel molten salt method and explored as an efficient noble-metal-free cocatalyst to significantly enhance the photocatalytic hydrogen evolution rate of CdS nanorods. The WC@C/CdS composite photocatalyst with a 7 wt% content of WC@C showed the highest photocatalytic hydrogen evolution rate of 8.84 mmol g^-1 h^-1, which was about 21 and 31 times higher than those of CdS and 7 wt% Pt/CdS under visible light irradiation. A high apparent quantum efficiency (AQY) of 55.28% could be achieved under 420 nm monochromatic light. Furthermore, the photocatalytic activity of the 7 wt% WC@C/CdS photocatalyst exhibited good stability for 12 consecutive cycles of the photocatalytic experiment with a total reaction time of 42 h. The excellent photocatalytic performance of the photocatalyst was attributed to the formation of a Schottky junction and the loading cocatalyst, which not only accelerated the separation of the photogenerated carrier but also provided a reactive site for hydrogen evolution. This work revealed that WC@C could act as an excellent cocatalyst for enhancing the photocatalytic activity of CdS nanorods.

Nitrogen-Doped Porous Carbon from Biomass with Efficient Toluene Adsorption and Superior Catalytic Performance

The chemical composition and surface groups of the carbon support affect the adsorption capacity of toluene. To investigate the effect of catalyst substrate on the catalytic performance, two different plant biomasses, banana peel and sugarcane peel, were used as carbon precursors to prepare porous carbon catalyst supports (Cba, Csu, respectively) by a chemical activation method. After decorating PtCo₃ nanoparticles onto both carbon supports (Cba, Csu), the PtCo₃-su catalyst demonstrated better catalytic performance for toluene oxidation (T₁₀₀ = 237 °C) at a high space velocity of 12,000 h^-1. The Csu support possessed a stronger adsorption capacity of toluene (542 mg g^-1), resulting from the synergistic effect of micropore volume and nitrogen-containing functional groups, which led to the PtCo₃-su catalyst exhibiting a better catalytic performance. Moreover, the PtCo₃-su catalyst also showed excellent stability, good water resistance properties, and high recyclability, which can be used as a promising candidate for practical toluene catalytic combustion.

Electrocatalytic water oxidation enabling the highly selective oxidation of styrene to benzaldehyde

An electrooxidation strategy mediated by reactive oxygen species is proposed to realize the transformation of styrene to benzaldehyde on a Pt anode, with a high selectivity of ca. 89% and faradaic efficiency of 28.8%. Isotopic labelling, electron paramagnetic resonance and radical scavenging experiments revealed that OH˙ and O₂^-˙ species, formed in situ via anodic water oxidation, play a crucial role in the selective formation of benzaldehyde.

Fabrication of 2D/2D BiOBr/g-C3N4 with efficient photocatalytic activity and clarification of its mechanism

Precise regulation of photoexcited charge carriers for separation and transportation is a core requirement for practical application in the photocatalysis field. Herein, a 2D/2D BiOBr/g-C₃N₄ heterojunction is prepared by a self-assembly method and exhibits enhanced and stable activity for photocatalytic degradation of bisphenol A (BPA) and norfloxacin (NFA) under visible light. Compared to pure g-C₃N₄, the kinetic constants of BPA and NFA degradation over BiOBr/g-C₃N₄ are enhanced by about 14.74 and 4.01 times, respectively. The separation and transportation mechanism for the photoexcited charge carriers is clarified by electron paramagnetic resonance (EPR), in situ X-ray photoelectron spectroscopy (in situ XPS), and theoretical calculations. The results show that BiOBr/g-C₃N₄ exhibits the feature of a relative p-n junction, in which the charges photoexcited on BiOBr/g-C₃N₄ with high redox potentials can be kept and spatially separated. Moreover, the built-in electric field with the direction of g-C₃N₄ → BiOBr and the opportune band curvature provide the driving force for charge separation and transportation. Additionally, BPA and NFA degradation intermediates are also detected by liquid chromatography-mass spectrometry. It is of great significance to fabricate efficient photocatalysts for environmental purification and other targeted reactions.

Novel Ultrasensitive Photoelectrochemical Cytosensor Based on Hollow CdIn2S4/In2S3 Heterostructured Microspheres for HepG2 Cells Detection and Inhibitor Screening

Hepatocellular carcinoma is a life-threatening malignant tumor found around the world for its high morbidity and mortality. Therefore, it is of great importance for sensitive analysis of liver cancer cells (HepG2 cells) in clinical diagnosis and biomedical research. To fulfill this demand, hollow CdIn₂S₄/In₂S₃ heterostructured microspheres (termed CdIn₂S₄/In₂S₃ for clarity) were prepared by a two-step hydrothermal strategy and applied for building a novel photoelectrochemical (PEC) cytosensor for ultrasensitive and accurate detection of HepG2 cells through specific recognition of CD133 protein on the cell surface with the respective aptamer. The optical properties of CdIn₂S₄/In₂S₃ were investigated by UV-vis diffuse reflectance spectroscopy (DRS) and PEC technology. By virtue of their appealing PEC characteristics, the resultant PEC sensor exhibited a wider dynamic linear range from 1 × 10² to 2 × 10⁵ cells mL^-1 with a lower limit of detection (LOD, 23 cells mL^-1), combined by evaluating the expression level of CD133 protein stimulated by metformin as a benchmarked inhibitor. This work opens a valuable and feasible avenue for sensitive detection of diverse tumor cells, holding great potential in early clinical diagnosis and treatment coupled by screening inhibitors.

Lattice distortion of crystalline-amorphous nickel molybdenum sulfide nanosheets for high-efficiency overall water splitting: libraries of lone pairs of electrons and in situ surface reconstitution

Lattice distortion is an important way to improve the electrocatalytic performance and stability of two-dimensional transition metal materials (2d-TMSs). Herein, a lattice distortion nickel-molybdenum sulfide electrocatalyst on foam nickel (NiMoS₄-12/NF) has been synthesized through a novel, simple, and effective crystalline-amorphous strategy. The electrocatalyst only requires 1.47 V to obtain 10 mA cm^-2 for overall water splitting (OWS) and can function stably for 100 h at a current density of 100 mA cm^-2, demonstrating an excellent electrocatalytic performance and stability. From the results of the transmission electron microscopy (TEM) and electron paramagnetic resonance spectroscopy (EPR), it can be seen that the (104) crystal lattice of NiMoS₄-12 undergoes interface strain under the crystalline-amorphous state, resulting in rich sulfur defects caused by lattice distortion, which could improve the intrinsic catalytic activity of NiMoS₄-12. According to the differential charge density analysis, around the sulfur defects, the Mo and Ni atoms with abundant lone pairs of electrons acted as libraries of lone pairs of electrons to enable an efficient hydrogen evolution reaction (HER). From the total density of states (TDOS) and the Gibbs free energy of hydrogen adsorption (ΔG_H*), the libraries of lone pairs of electrons not only effectively optimized the distribution of the surface electron density of states at the Fermi level, but also reduced the ΔG_H*, thereby improving the intrinsic HER electrocatalytic performance. The in situ Raman test results demonstrate that during the oxygen evolution reaction (OER), the surface of the nickel molybdenum sulfide was reconstructed, and highly active Ni-OOH was generated. From the calculated free energy diagrams, the Ni-OOH could optimize the reaction barrier of the rate-determining step (RDS) for the OER to enhance the slow oxygen evolution reaction kinetics. This work will contribute to the rational design of a 2d-TMSs electrocatalyst, as well as investigation of the catalytic mechanism.

Synergistic Effect of the Sulfur Vacancy and Schottky Heterojunction on Photocatalytic Uranium Immobilization: The Thermodynamics and Kinetics

Not only a critical matter in the nuclear fuel cycle but uranium is also a global contaminant with both radioactive and chemical toxicity. Reducing soluble hexavalent uranium [U(VI)] to relatively nonimmigrated tetravalent uranium [U(IV)] by photocatalytic technologies is recognized as a highly promising strategy for avoiding environmental pollution and re-extracting uranium resources from nuclear wastewater. Herein, we have designed a heterojunction photocatalyst constructed from the carbon aerogels (CA) and the CdS nanoflowers with an S-vacancy (CA@CdS-SV). With the S-vacancy and heterojunction being synergized, the U(VI) removal rate exceeded 97% in 40 min without the addition of any sacrificial agents. As impacted by the synergistic effects of the S-vacancy and heterojunction, thermodynamics and kinetics revealed that photogenerated electrons were first captured via shallow traps generated by vacancies on CdS-SV and then transferred to the CA surfaces through the heterojunction to realize the spatial separation of carriers, thereby achieving a satisfactory performance. This work is considered to underpin the improvement of U(VI) immobilization by exploiting the synergistic effect of vacancy engineering and the Schottky heterojunction from the perspective of thermodynamics and kinetics.

Boosting the catalytic behavior and stability of a gold catalyst with structure regulated by ceria

In this work, a series of colloidal gold nanoparticles with controllable sizes were anchored on carbon nanotubes (CNT) for the aerobic oxidation of benzyl alcohol. The intrinsic influence of Au particles on the catalytic behavior was unraveled based on different nanoscale-gold systems. The Au/CNT-A sample with smaller Au sizes deserved a faster reaction rate, mainly resulting from the higher dispersion degree (23.5%) of Au with the available exposed sites contributed by small gold particles. However, monometallic Au/CNT samples lacked long-term stability. CeO₂ was herein decorated to regulate the chemical and surface structure of the Au/CNT. An appropriate CeO₂ content tuned the sizes and chemical states of Au by electron delivery with better metal dispersion. Small CeO₂ crystals that were preferentially neighboring the Au particles facilitated the generation of Au–CeO₂ interfaces, and benefited the continuous supplementation of oxygen species. The collaborative functions between the size effect and surface chemistry accounted for the higher benzaldehyde yield and sustainably stepped-up reaction rates by Au-Ce₅/CNT with 5 wt% CeO₂.

In this work, a series of colloidal gold nanoparticles with controllable sizes and CeO₂ promotion were anchored on carbon nanotubes (CNT) for the aerobic oxidation of benzyl alcohol.

Self-assembled Transition Metal Chalcogenides@CoAl-LDH 2D/2D Heterostructures with Enhanced Photoactivity for Hydrogen Evolution

Transition metal chalcogenides (TMCs) have been well-established as ideal low-dimensional systems for photocatalytic hydrogen evolution. Strategies toward improving the activity of these TMCs photocatalysts by crafting heterostructures have been intensively...

Spiderweb-inspired all-weather CoS quantum dots confined in N-doped carbon for boosted sulfate radical evolution

Inspired by the working principle of natural spiderweb and long-persistence phosphor, we have synthesized a spider-web-like nanocomposite in which the CoS quantum dots confined in N-doped carbon framework/carbon nanotube (CNTs)....

Spatially isolated CoNx quantum dots on carbon nanotubes enable a robust radical-free Fenton-like process

We unprecedentedly report spatially separated CoN_x nanodots on carbon nanotubes (CNTs) via a facile formamide condensation reaction. To our knowledge, CoN_x-CNTs outperform the activities of current catalysts in peroxymonosulfate activation. CoN_x-CNT-oriented radical-free degradation of contaminants shows robust anti-interference capacity toward environmental conditions. Our work will stimulate general interest in designing cost-effective and versatile quantum-/atom-sized catalysts with fully exposed active sites for water purification and beyond.

pH-Controlled assembly of [ZnW12O40]6--based hybrids from a 0D dimer to a 2D network: synthesis, crystal structure, and photocatalytic performance in transformation of toluene into benzaldehyde

Polyoxometalate-based organic-inorganic hybrids have attracted considerable attention due to their fascinating structures and wide application prospects. In this work, using the same building blocks, ligands and metal ions (ZnW₁₂O₄₀^6-(ZnW₁₂), 2,2'-bipyridine (2,2'-bipy), and Cu²⁺), we synthesized three new POM-based hybrids by controlling the pH values of the reaction systems. These three compounds {(Zn_0.6(H₂)_0.4W₁₂O₄₀)[Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₂][Cu(2,2'-bipy)(H₂O)₃]}₂·6H₂O (1), (Me₄N)₂{ZnW₁₂O₄₀[Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₃]}·5H₂O (2), and {(Zn_0.5(H₂)_0.5W₁₂O₄₀)[Cu(2,2'-bipy)][Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₂]}·5H₂O (3) have been structurally characterized by single-crystal X-ray diffraction. Compound 1 appears as a dimeric cluster structure, while compounds 2 and 3 appear as a 1D chain structure and a 2D network, respectively. The semiconducting properties of compounds 1-3 are different, which was demonstrated by band gap (E_g) and photocurrent response measurements. Compound 3 can efficiently catalyze the photooxidation of toluene to benzaldehyde with high selectivity using molecular oxygen as the oxidant component. Moreover, compound 3 was recycled and reused three times without significant degradation in conversion and selectivity. In addition, the mechanism of the photocatalytic reaction was also investigated.

CdIn2S4/In(OH)3/NiCr-LDH Multi-Interface Heterostructure Photocatalyst for Enhanced Photocatalytic H2 Evolution and Cr(VI) Reduction

The development of highly active and stable photocatalysts, an effective way to remediate environment pollution and alleviate energy shortages, remains a challenging issue. In this work, a CdIn2S4/In(OH)3 nanocomposite was deposited in-situ on NiCr-LDH nanosheets by a simple hydrothermal method, and the obtained CdIn2S4/In(OH)3/NiCr-LDH heterostructure photocatalysts with multiple intimate-contact interfaces exhibited better photocatalytic activity. The photocatalytic H2 evolution rate of CdIn2S4/In(OH)3/NiCr-LDH increased to 10.9 and 58.7 times that of the counterparts CdIn2S4 and NiCr-LDH, respectively. Moreover, the photocatalytic removal efficiency of Cr(VI) increased from 6% for NiCr-LDH and 75% for CdIn2S4 to 97% for CdIn2S4/In(OH)3/NiCr-LDH. The enhanced photocatalytic performance was attributed to the formation of multi-interfaces with strong interfacial interactions and staggered band alignments, which offered multiple pathways for carrier migration, thus promoting the separation efficiency of photo-excited electrons and holes. This study demonstrates a facile method to fabricate inexpensive and efficient heterostructure photocatalysts for solving environmental problems.