Ultrafine Nickel Nanoparticles Encapsulated in N-Doped Carbon Promoting Hydrogen Oxidation Reaction in Alkaline Media

Tailoring the Hydrogen Spillover Effect in Ni-Based Heterostructure Catalysts for Boosting the Alkaline Hydrogen Oxidation Reaction

Improving the catalytic efficiency of platinum group metal-free (PGM-free) catalysts for the sluggish alkaline hydrogen oxidation reaction (HOR) is crucial to the anion exchange membrane fuel cell. Recently, numerous Ni-based heterostructures have been designed based on bifunctional theory to enhance HOR activity by optimizing the binding energy of both H* and OH*; however, their activities are still far inferior to those of PGM catalysts. Indeed, the long transfer pathway for intermediates between different active sites in such heterostructures has rarely been investigated, which could be the reason for the bottleneck. Here, we design a Ni/MoOxHy heterostructure catalyst to promote H* migration from the Ni side to the interface for alkaline HOR via the hydrogen spillover effect. In situ X-ray absorption fine structure, Raman characterizations, H/D kinetic isotope effects, and theoretical calculations have proven facile H* migration from the Ni side to the interface, which further reacts with OH* on the MoOxHy surface. Besides, the hydrogen spillover effect is also beneficial for the preservation of the metallic phase of Ni during the reaction. The catalyst exhibits a high activity with Jk,m of 58.5 mA mgNi-1 and j0,s of 42 μA cmNi-2, which is among the best PGM-free catalysts and is even comparable to some PGM catalysts. It also shows the highest power density (511 mW cm-2) as a PGM-free anode when assembled into fuel cells under moderate back pressure. These findings prove that in addition to optimizing electrophilicity and oxophilicity for active sites, we could also improve the HOR activity from the transfer pathway for intermediates, which provides insight into the design of other efficient HOR catalysts.

Unraveling Stoichiometry Effect in Nickel-Tungsten Alloys for Efficient Hydrogen Oxidation Catalysis in Alkaline Electrolytes

Anion-exchange membrane fuel cells provide the possibility to use platinum group metal-free catalysts, but the anodic hydrogen oxidation reaction (HOR) suffers from sluggish kinetics and its source is still debated. Here, over nickel-tungsten (Ni-W) alloy catalysts, we show that the Ni : W ratio greatly governs the HOR performance in alkaline electrolyte. Experimental and theoretical studies unravel that alloying with W can tune the unpaired electrons in Ni, tailoring the potential of zero charge and the catalytic surface to favor hydroxyl adsorption (OHad). The OHad species coordinately interact with potassium (K+) ions, which break the K+ solvation sheath to leave free water molecules, yielding an improved connectivity of hydrogen-bond networks. Consequently, the optimal Ni17W3 alloy exhibits alkaline HOR activity superior to the state-of-the-art platinum on carbon (Pt/C) catalyst and operates steadily with negligible decay after 10,000 cycles. Our findings offer new understandings of alloyed HOR catalysts and will guide rational design of next-generation catalysts for fuel cells.

Regulation of hydrogen binding energy via oxygen vacancy enables an efficient trifunctional Rh-Rh2O3 electrocatalyst for fuel cells and water splitting

Developing multi-functional electrocatalysts is of great practical significance for fuel cells and water splitting. Herein, Rh-Rh2O3 nanoclusters are prepared and the surface oxygen vacancy content is regulated elaborately by post-treatment. The optimized Rh-Rh2O3/C-400 exhibits superior trifunctional catalytic activity for hydrogen oxidation reaction (HOR), hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR), i.e., the mass activity for HOR is 2.29 mA μgRh-1, and the overpotential for HER and HzOR at 10 mA cm-2 is as low as 12 mV and 31 mV, respectively, superior to the benchmark Pt/C. Rh-Rh2O3/C-400 also displays promising performance in practical devices, with the H2-O2 anion-exchange-membrane fuel cell delivering a peak power density of 0.66 W cm-2, and the hydrazine-assisted water splitting electrolyzer requiring a low electrolysis voltage of 0.161 V at 0.1 A cm-2. The experimental and theoretical investigations discover that the hydrogen binding energy (HBE) is linearly depended on surface oxygen vacancy contents, and the HBE directly determines the catalytic activity for HOR, HER and HzOR. This work not only innovates an efficient Rh-based nanocluster tri-functional electrocatalyst, but also eludicates the intrinsic relationship of surface structure-intermediate adsorption-catalytic activity.

Non-Noble Metal High-Entropy Alloy-Based Catalytic Electrode for Long-Life Hydrogen Gas Batteries

The development of efficient, stable, and low-cost bifunctional catalysts for the hydrogen evolution/oxidation reaction (HER/HOR) is critical to promote the application of hydrogen gas batteries in large scale energy storage systems. Here we demonstrate a non-noble metal high-entropy alloy grown on Cu foam (NNM-HEA@CF) as a self-supported catalytic electrode for nickel-hydrogen gas (Ni-H2) batteries. Experimental and theoretical calculation results reveal that the NNM-HEA catalyst greatly facilitates the HER/HOR catalytic process through the optimized electronic structures of the active sites. The assembled Ni-H2 battery with NNM-HEA@CF as the anode shows excellent rate capability and exceptional cycling performance of over 1800 h without capacity decay at an areal capacity of 15 mAh cm-2. Furthermore, a scaled-up Ni-H2 battery fabricated with an extended capacity of 0.45 Ah exhibits a high cell-level energy density of ∼109.3 Wh kg-1. Moreover, its estimated cost reaches as low as ∼107.8 $ kWh-1 based on all key components of electrodes, separator and electrolyte, which is reduced by more than 6 times compared to that of the commercial Pt/C-based Ni-H2 battery. This work provides an approach to develop high-efficiency non-noble metal-based bifunctional catalysts for hydrogen batteries in large-scale energy storage applications.

A polymer tethering strategy to achieve high metal loading on catalysts for Fenton reactions

The development of heterogenous catalysts based on the synthesis of 2D carbon-supported metal nanocatalysts with high metal loading and dispersion is important. However, such practices remain challenging to develop. Here, we report a self-polymerization confinement strategy to fabricate a series of ultrafine metal embedded N-doped carbon nanosheets (M@N-C) with loadings of up to 30 wt%. Systematic investigation confirms that abundant catechol groups for anchoring metal ions and entangled polymer networks with the stable coordinate environment are essential for realizing high-loading M@N-C catalysts. As a demonstration, Fe@N-C exhibits the dual high-efficiency performance in Fenton reaction with both impressive catalytic activity (0.818 min-1) and H2O2 utilization efficiency (84.1%) using sulfamethoxazole as the probe, which has not yet been achieved simultaneously. Theoretical calculations reveal that the abundant Fe nanocrystals increase the electron density of the N-doped carbon frameworks, thereby facilitating the continuous generation of long-lasting surface-bound •OH through lowering the energy barrier for H2O2 activation. This facile and universal strategy paves the way for the fabrication of diverse high-loading heterogeneous catalysts for broad applications.

Directional electronic tuning of Ni nanoparticles by interfacial oxygen bridging of support for catalyzing alkaline hydrogen oxidation

Metallic nickel (Ni) is a promising candidate to substitute Pt-based catalysts for hydrogen oxidation reaction (HOR), but huge challenges still exist in precise modulation of the electronic structure to boost the electrocatalytic performances. Herein, we present the use of single-layer Ti3C2Tx MXene to deliberately tailor the electronic structure of Ni nanoparticles via interfacial oxygen bridges, which affords Ni/Ti3C2Tx electrocatalyst with exceptional performances for HOR in an alkaline medium. Remarkably, it shows a high kinetic current of 16.39 mA cmdisk-2 at the overpotential of 50 mV for HOR [78 and 2.7 times higher than that of metallic Ni and Pt/C (20%), respectively], also with good durability and CO antipoisoning ability (1,000 ppm) that are not available for conventional Pt/C (20%) catalyst. The ultrahigh conductivity of single-layer Ti3C2Tx provides fast transmission of electrons for Ni nanoparticles, of which the uniform and small sizes endow them with high-density active sites. Further, the terminated -O/-OH functional groups on Ti3C2Tx directionally capture electrons from Ni nanoparticles via interfacial Ni-O bridges, leading to obvious electronic polarization. This could enhance the Nids-O2p interaction and weaken Nids-H1s interaction of Ni sites in Ni/Ti3C2Txenabling a suitable H-/OH-binding energy and thus enhancing the HOR activity.

A Highly Active and Durable Hierarchical Electrocatalyst for Large-Current-Density Water Splitting

Designing bifunctional catalysts with high current densities under industrial circumstances is crucial to propelling hydrogen energy with a boost from fundamental to practical application. In this work, heterojunction nanowire arrays consisting of manganese oxide and cobalt phosphide (denoted as MnO-CoP/NF) are designed to meet the industrial demand by regulating the synergic mass transport and electronic structure coupling with numerous nano-heterogeneous interfaces. The optimal MnO-CoP/NF electrode exhibits remarkable bifunctional electrocatalytic performance with overpotentials of 259.5 mV for hydrogen evolution at a large current density of 1000 mA cm-2 and 392.2 mV for oxygen evolution at 1500 mA cm-2. Moreover, the MnO-CoP/NF electrode demonstrates superior durability and an ultralow voltage of 1.76 V at 500 mA cm-2, outperforming that of a commercial RuO2||Pt/C electrode. This work sheds light on the design of metallic heterostructures with optimized interfacial electronic structures and a high abundance of active sites for practical industrial water splitting applications.

Carbon-Doped Nickle Via a Fast Decarbonization Route for Enhanced Hydrogen Oxidation Reaction in Alkaline Media

Nickel (Ni) based materials with non-metal heteroatom doping are competitive substitutes for platinum group catalyst toward alkaline hydrogen oxidation reaction (HOR). However, the incorporation of non-metal atom into the lattice of conventional fcc phase Ni can easily trigger a structural phase transformation, forming hcp phase nonmetallic intermetallic compounds. Such tangle phenomenon makes it difficult to uncover the relationship between HOR catalytic activity and doping effect on fcc phase Ni. Herein, taking trace carbon doped Ni (C-Ni) nanoparticles as an example, a new nonmetal doped Ni nanoparticles synthesized by a simple fast decarbonization route using Ni3 C as precursor is presented, which provides an ideal platform to study the structure-activity relationship between alkaline HOR performance and non-metal doping effect toward fcc phase Ni. The obtained C-Ni exhibits an enhanced alkaline HOR catalytic activity compared with pure Ni, approaching to commercial Pt/C. X-ray absorption spectroscopy confirms that the trace carbon doping can modulate the electronic structure of conventional fcc phase nickel. Besides, theoretical calculations suggest that the introducing of C atoms can effectively regulate the d-band center of Ni atoms, resulting in the optimized hydrogen absorption, thereby improving the HOR activity.

Synergistic Regulation of Pt Clusters on Porous Support by Mo and P for Robust Bifunctional Hydrogen Electrocatalysis

Developing efficient electrocatalysts toward hydrogen oxidation and evolution reactions (HER/HOR) in alkaline electrolytes is essential for realizing renewable hydrogen technologies. Herein, we demonstrate that the introduction of dual-active species such as Mo and P (Pt/Mo,P@NC) can effectively regulate the surface electronic structure of platinum (Pt) and significantly improve the HOR/HER performance. The optimized Pt/Mo,P@NC exhibits remarkable catalytic activity, achieving a normalized exchange current density of 2.89 mA cm^-2 and a mass activity of 2.3 mA μg_Pt^-1, which are approximately 2.2 and 13.5 times higher than those of the state-of-the-art Pt/C catalyst, respectively. Moreover, it performs an impressive HER performance with an overpotential of 23.4 mV at 10 mA cm^-2, which is lower than most documented alkaline electrocatalysts. Experimental results reveal that the modifying effect of Mo and P optimizes the adsorption of H and OH on Pt/Mo,P@NC, resulting in an outstanding catalytic performance. This work has significant theoretical and practical significance for developing a novel and highly efficient catalyst for bifunctional hydrogen electrocatalysis.

Electronic Modulation and Mechanistic Study of Ru-Decorated Porous Cu-Rich Cuprous Oxide for Robust Alkaline Hydrogen Oxidation and Evolution Reactions

Rational design of high-efficiency and viable electrocatalysts is essential in overcoming the bottleneck of sluggish alkaline hydrogen oxidation/evolution reaction (HOR/HER) kinetics. In this study, a metal-organic framework-derived strategy for constructing a Pt-free catalyst with Ru clusters anchored on porous Cu-Cu₂ O@C is proposed. The designed Ru/Cu-Cu₂ O@C exhibits superior HOR performance, with a mass activity of 2.7 mA  μ g R u - 1 ${{{\rm \mu }{\rm g}}_{{\rm R}{\rm u}}^{-1}}$ at 50 mV, which is about 24 times higher than that of state-of-the-art Pt/C (0.11 mA  μ g P t - 1 ${{{\rm \mu }{\rm g}}_{{\rm P}{\rm t}}^{-1}}$ ). Significantly, Ru/Cu-Cu₂ O@C also displays impressive HER performance by generating 26 mV at 10 mA cm^-2 , which exceeds the majority of documented Ru-based electrocatalysts. Systematic characterization and density functional theory (DFT) calculations reveal that efficient electron transfer between Ru and Cu species results in an attenuated hydrogen binding energy (HBE) of Ru and an enhanced hydroxy binding energy (OHBE) of Cu₂ O, together with an optimized H₂ O adsorption energy with Cu₂ O as the H₂ O*-capturing site, which jointly facilitates HOR and HER kinetics.

Heterostructural Ni-Ni0.2 Mo0.8 N Interface Engineering Boosts Alkaline Hydrogen Electrocatalysis

Exploring efficient and low-cost bifunctional catalysts for hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) is highly desirable for the achievement of unitized regenerative fuel cells. Herein, a facile method to prepare hetero-interfacial Ni-Ni_0.2 Mo_0.8 N nanosheets with tailored d-band for efficient alkaline hydrogen electrocatalysis is presented. Mechanism studies indicate that interface engineering can downshift the d-band center of Ni-Ni_0.2 Mo_0.8 N nanosheets due to the electron transfer from Ni to Ni_0.2 Mo_0.8 N, which weakens the binding strength of reaction intermediates, thereby boosting the catalytic performance. Relative to pure Ni, Ni-Ni_0.2 Mo_0.8 N nanosheets show a lower overpotential of 83 mV at -10 mA cm^-2 and good stability during 2,000 cycles for HER. Meanwhile, Ni-Ni_0.2 Mo_0.8 N nanosheets exhibit an improved exchange current density for HOR with a 10.2-fold enhancement in comparison with that of pure Ni. This work provides valuable insight into the reasonable design of efficient energy-related electrocatalysts based on the tailoring of d-band center by interface engineering.

Bio-Inspired FeMo2S4 Microspheres as Bifunctional Electrocatalysts for Boosting Hydrogen Oxidation/Evolution Reactions in Alkaline Solution

Developing robust and effectual nonprecious electrocatalysts for the bifunctional hydrogen oxidation and evolution reactions (HOR and HER) in alkaline electrolyte is of critical significance for the realization of future hydrogen economy but challenging. Herein, this work demonstrates a new routine for the preparation of bio-inspired FeMo₂S₄ microspheres via the one-step sulfuration of Keplerate-type polyoxometalate {Mo₇₂Fe₃₀}. The bio-inspired FeMo₂S₄ microspheres feature potential-abundant structural defects and atomically precise iron doping and act as an effective bifunctional electrocatalyst for hydrogen oxidation/reduction reactions. The FeMo₂S₄ catalyst presents an impressive alkaline HOR activity compared to FeS₂ and MoS₂ with the high mass activity of 1.85 mA·mg^-1 and high specific activity as well as excellent tolerance to carbon monoxide poisoning. Meanwhile, FeMo₂S₄ electrocatalyst also displayed prominent alkaline HER activity with a low overpotential of 78 mV at a current density of 10 mA·cm^-2 and robust long-term durableness. Density functional theory (DFT) calculations indicate that the bio-inspired FeMo₂S₄ with a unique electron structure possesses the optimal hydrogen adsorption energy and enhanced adsorption of hydroxyl intermediates, which accelerates the potential-determining Volmer step, thus promoting the HOR and HER performance. This work provides a new pathway for designing efficient noble-metal-free electrocatalysts for the hydrogen economy.

Interface Metal Oxides Regulating Electronic State around Nickel Species for Efficient Alkaline Hydrogen Electrocatalysis

Heterogeneous electrocatalysis typically depends on the surface electronic states of active sites. Modulating the surface charge state of an electrocatalysts can be employed to improve performance. Among all the investigated materials, nickel (Ni)-based catalysts are the only non-noble-metal-based alternatives for both hydrogen oxidation and evolution reactions (HOR and HER) in alkaline electrolyte, while their activities should be further improved because of the unfavorable hydrogen adsorption behavior. Hereto, Ni with exceptional HOR electrocatalytic performance by changing the d-band center by metal oxides interface coupling formed in situ is endowed. The resultant MoO₂ coupled Ni heterostructures exhibit an apparent HOR activity, even approaching to that of commercial 20% Pt/C benchmark, but with better long-term stability in alkaline electrolyte. An exceptional HER performance is also achieved by the Ni-MoO₂ heterostructures. The experiment results are rationalized by the theoretical calculations, which indicate that coupling MoO₂ with Ni results in the downshift of d-band center of Ni, and thus weakens hydrogen adsorption and benefits for hydroxyl adsorption. This concept is further proved by other metal oxides (e.g., CeO₂ , V₂ O₃ , WO₃ , Cr₂ O₃ )-formed Ni-based heterostructures to engineer efficient hydrogen electrocatalysts.

Heterogeneous Ni3P/Ni nanoparticles with optimized Ni active sites anchored in N-doped mesoporous nanofibers for boosting pH-universal hydrogen evolution

Developing low-cost, environmentally friendly and efficient non-precious metal electrocatalysts as alternatives to noble metals for the hydrogen evolution reaction (HER) is highly essential for the sustainable advancement of green hydrogen energy. Herein, a novel heterostructured Ni₃P/Ni nanoparticle anchored in nitrogen-doped mesoporous carbon nanofibers (Ni₃P/Ni@N-CNFs) is prepared by a facile solid-phase calcination protocol. The results demonstrated that benefiting from the intensive electronic coupling effect at the interface of the Ni₃P/Ni heterostructure, the electron configuration of the Ni active site is optimized and thus the favorable HER activity. Furthermore, the N-doped carbon nanofiber scaffold with an extensive mesoporous structure endows Ni₃P/Ni@N-CNFs with abundant electrochemically active sites together with excellent conductivity and stability, contributing to fast electron/mass transport. As expected, the resultant Ni₃P/Ni@N-CNF electrocatalyst exhibited exceptional HER catalytic properties under universal pH conditions, driving a current density of 10 mA cm^-2 at pretty low overpotentials of 121 mV, 145 mV and 187 mV in acidic, basic and neutral solutions, respectively, and retaining the catalytic stability for over 60 h. This intriguing work represents a fresh perspective for designing and exploiting highly advanced phosphide electrocatalysts for green hydrogen fuel production.

Electrocatalytic Hydrogen Oxidation in Alkaline Media: From Mechanistic Insights to Catalyst Design

With the potential to circumvent the need for scarce and cost-prohibitive platinum-based catalysts in proton-exchange membrane fuel cells, anion-exchange membrane fuel cells (AEMFCs) are emerging as alternative technologies with zero carbon emission. Numerous noble metal-free catalysts have been developed with excellent catalytic performance for cathodic oxygen reduction reaction in AEMFCs. However, the anodic catalysts for hydrogen oxidation reaction (HOR) still rely on noble metal materials. Since the kinetics of HOR in alkaline media is 2-3 orders of magnitude lower than that in acidic media, it is a major challenge to either improve the performance of noble metal catalysts or to develop high-performance noble metal-free catalysts. Additionally, the mechanisms of alkaline HOR are not yet clear and still under debate, further hampering the design of electrocatalysts. Against this backdrop, this review starts with the prevailing theories for alkaline HOR on the basis of diverse activity descriptors, i.e., hydrogen binding energy theory and bifunctional theory. The design principles and recent advances of HOR catalysts employing the aforementioned theories are then summarized. Next, the strategies and recent progress in improving the antioxidation capability of HOR catalysts, a thorny issue which has not received sufficient attention, are discussed. Moreover, the significance of correlating computational models with real catalyst structure and the electrode/electrolyte interface is further emphasized. Lastly, the remaining controversies about the alkaline HOR mechanisms as well as the challenges and possible research directions in this field are presented.

Atomic-precision Pt6 nanoclusters for enhanced hydrogen electro-oxidation

The discord between the insufficient abundance and the excellent electrocatalytic activity of Pt urgently requires its atomic-level engineering for minimal Pt dosage yet maximized electrocatalytic performance. Here we report the design of ultrasmall triphenylphosphine-stabilized Pt₆ nanoclusters for electrocatalytic hydrogen oxidation reaction in alkaline solution. Benefiting from the self-optimized ligand effect and atomic-precision structure, the nanocluster electrocatalyst demonstrates a high mass activity, a high stability, and outperforms both Pt single atoms and Pt nanoparticle analogues, uncovering an unexpected size optimization principle for designing Pt electrocatalysts. Moreover, the nanocluster electrocatalyst delivers a high CO-tolerant ability that conventional Pt/C catalyst lacks. Theoretical calculations confirm that the enhanced electrocatalytic performance is attributable to the bifold effects of the triphenylphosphine ligand, which can not only tune the formation of atomically precise platinum nanoclusters, but also shift the d-band center of Pt atoms for favorable adsorption kinetics of *H, *OH, and CO.

While Pt is an active fuel cell catalyst, it’s low abundance and high cost spurs research into boosting performances from lesser Pt amounts. Here, authors design atomically precise triphenylphosphine-stabilized Pt nanoclusters with high activities and durabilities for electrocatalytic H₂ oxidation.

Coordination Polymer Framework-Derived Ni-N-Doped Carbon Nanotubes for Electro-Oxidation of Urea

Electrochemical oxidation of urea (UOR) is critical in the removal of urea from wastewater and energy conservation and storage. Nickel-based catalysts are widely used for urea-ORR, but in all cases, the nickel must be hybridized with carbon materials to improve its conductivity. In this manuscript, we demonstrate the synthesis of a nickel-decorated carbon nanotube (Ni-NCNT) by simple microwave pyrolysis of Dabco (1,4-diazabicyclo[2.2.2]octane)-based coordination polymer frameworks (CPF). The surface structure, morphology and chemical composition of Ni-NCNT were characterized by Raman spectrum, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy (EDS) analysis. SEM studies showed micrometer-long bamboo-shaped CNTs with nickel nanoparticles anchored to the walls and inside the nanotubes. A structural study by TEM and Raman spectra showed that carbon nanotubes are rich in defects due to the presence of nitrogen, and this was confirmed by energy-dispersive X-ray spectroscopy (EDS) maps. When applied as electrocatalysts in urea oxidation reactions (UOR), our newly developed Ni-NCNT shows excellent electrocatalytic activity and stability, making it a versatile catalyst in energy generation and mitigating water contamination.

Catalyst overcoating engineering towards high-performance electrocatalysis

Clean and sustainable energy needs the development of advanced heterogeneous catalysts as they are of vital importance for electrochemical transformation reactions in renewable energy conversion and storage devices. Advances in nanoscience and material chemistry have afforded great opportunities for the design and optimization of nanostructured electrocatalysts with high efficiency and practical durability. In this review article, we specifically emphasize the synthetic methodologies for the versatile surface overcoating engineering reported to date for optimal electrocatalysts. We discuss the recent progress in the development of surface overcoating-derived electrocatalysts potentially applied in polymer electrolyte fuel cells and water electrolyzers by correlating catalyst intrinsic structures with electrocatalytic properties. Finally, we present the opportunities and perspectives of surface overcoating engineering for the design of advanced (electro)catalysts and their deep exploitation in a broad scope of applications.

Electron Density Modulation of MoO2/Ni to Produce Superior Hydrogen Evolution and Oxidation Activities

Hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) have aroused great interest, but the high price of platinum group metals (PGMs) limits their development. The electronic reconstruction at the interface of a heterostructure is a promising strategy to enhance their catalytic performance. Here, MoO₂/Ni heterostructure was synthesized to provide effective HER in an alkaline electrolyte and exhibit excellent HOR performance. Theoretical and experimental analyses prove that the electron density around the Ni atom is reduced. The electron density modulation optimizes the hydrogen adsorption and hydroxide adsorption free energy, which can effectively improve the activity of both HER and HOR. Accordingly, the prepared MoO₂/Ni@NF catalyst reveals robust HER activity (η₁₀ = 50.48 mV) and HOR activity (j₀ = ∼1.21 mA cm^-2). This work demonstrates an effective method to design heterostructure interfaces and tailor the surface electronic structure to improve HER/HOR performance.