Subnano-FeOx Clusters Anchored in an Ultrathin Amorphous Al2O3 Nanosheet for Styrene Epoxidation

Selective oxidation of styrene over transition metal-doped mesoporous silica catalyst

An inverse-micelle sol-gel method was used to prepare Ti and Fe-doped mesoporous silica catalysts, and they were utilized for selective oxidation of styrene to benzaldehyde. The amorphous peak of silica was confirmed by XRD and there were no peaks related to Ti or Fe oxides. Results indicate that the metals were homogeneously distributed in the silica matrix, leading to higher surface area and pore volume. Introduction of Ti species into mesoporous silica improved the total catalyst acidity and catalytic data revealed that the oxidation activity of Ti-doped mesoporous silica (Ti-MS) catalyst achieved 93% styrene conversion and 91% benzaldehyde selectivity under optimized conditions. Formic acid, phenylacetaldehyde, acetophenone and epoxy-styrene are all minor products of this reaction. The acid strength and the use of appropriate solvents and oxidants are crucial to achieving high styrene conversion and benzaldehyde yield. The catalysts were reusable up to 4 cycles without loss of activity.

Heterogeneous Iron-Based Catalysts for Organic Transformation Reactions: A Brief Overview

Iron (Fe) is considered to be one of the most significant elements due to its wide applications. Recent years have witnessed a burgeoning interest in Fe catalysis as a sustainable and cost-effective alternative to noble metal catalysis in organic synthesis. The abundance and low toxicity of Fe, coupled with its competitive reactivity and selectivity, underscore its appeal for sustainable synthesis. A lot of catalytic reactions have been performed using heterogeneous catalysts of Fe oxide hybridized with support systems like aluminosilicates, clays, carbonized materials, metal oxides or polymeric matrices. This review provides a comprehensive overview of the latest advancements in Fe-catalyzed organic transformation reactions. Highlighted areas include cross-coupling reactions, C-H activation, asymmetric catalysis, and cascade processes, showcasing the versatility of Fe across a spectrum of synthetic methodologies. Emphasis is placed on mechanistic insights, elucidating the underlying principles governing iron-catalyzed reactions. Challenges and opportunities in the field are discussed, providing a roadmap for future research endeavors. Overall, this review illuminates the transformative potential of Fe catalysis in driving innovation and sustainability in organic chemistry, with implications for drug discovery, materials science, and beyond.

Heterogeneous organophotocatalytic HBr oxidation coupled with oxygen reduction for boosting bromination of arenes

Developing mild photocatalytic bromination strategies using sustainable bromo source has been attracting intense interests, but there is still much room for improvement. Full utilization of redox centers of photocatalysts for efficient generation of Br+ species is the key. Herein we report heterogenous organophotocatalytic HBr oxidation coupled with oxygen reduction to furnish Br2 and H2O2 for effective bromination of arenes over Al2O3 supported perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). Mechanism studies suggest that O-vacancy in Al2O3 can provide Lewis-acid-type anchoring sites for O2, enabling unexpected dual-electron transfer from anchored photoexcited PTCDA to chemically bound O2 to produce H2O2. The in-situ generated H2O2 and Br2 over redox centers work together to generate HBrO for bromination of arenes. This work provides new insights that heterogenization of organophotocatalysts can not only help to improve their stability and recyclability, but also endow them with the ability to trigger unusual reaction mode via cooperative catalysis with supports.

Immobilization of Perylenetetracarboxylic Dianhydride on Al2O3 for Efficiently Photocatalytic Sulfide Oxidation

Perylenetetracarboxylic dianhydride (PTCDA) derivatives have received significant attention as molecule photocatalysts. However, the poor recyclability of molecule-type photocatalysts hinders their widespread applications. Herein, immobilization of PTCDA on Al2O3 was achieved by simply physical mixing, which not only dramatically improved their recyclability, but also surprisingly improved the reactivity. A mechanism study suggested that the photo-exited state (PTCDA*) of PTCDA could promote the oxidation of thioanisole to generate PTCDA•-, which sequentially reduces oxygen to furnish superoxide radicals to achieve the catalytic cycle. Herein, the immobilization support Al2O3 was able to facilitate the strong adsorption of thioanisole, thereby boosting the photocatalytic activity. This work provides a new insight that the immobilization of organic molecular photocatalysts on those supports with proper adsorption sites could furnish highly efficient, stable, and recyclable molecular-based heterogeneous photocatalysts.

Confined Synthesis of Amorphous Al2 O3 Framework Nanocomposites Based on the Oxygen-Potential Diagram as Sulfur Hosts for Catalytic Conversion

Sulfur cathodes in Li-S batteries suffer significant volumetric expansion and lack of catalytic activity for polysulfide conversion. In this study, a confined self-reduction synthetic route is developed for preparing nanocomposites using diverse metal ions (Mn2+ , Co2+ , Ni2+ , and Zn2+ )-introduced Al-MIL-96 as precursors. The Ni2+ -introduced Al-MIL-96-derived nanocomposite contains a "hardness unit", amorphous aluminum oxide framework, to restrain the volumetric expansion, and a "softness unit", Ni nanocrystals, to improve the catalytic activity. The oxygen-potential diagram theoretically explains why Ni2+ is preferentially reduced. Postmortem microstructure characterization confirms the suppressive volume expansion. The in situ ultraviolet-visible measurements are performed to probe the catalytic activity of polysulfide conversion. This study provides a new perspective for designing nanocomposites with "hardness units" and "softness units" as sulfur or other catalyst hosts.

Regulating the electronic structure through charge redistribution in dense single-atom catalysts for enhanced alkene epoxidation

Inter-site interaction in densely populated single-atom catalysts has been demonstrated to have a crucial role in regulating the electronic structure of metal atoms, and consequently their catalytic performances. We herein report a general and facile strategy for the synthesis of several densely populated single-atom catalysts. Taking cobalt as an example, we further produce a series of Co single-atom catalysts with varying loadings to investigate the influence of density on regulating the electronic structure and catalytic performance in alkene epoxidation with O₂. Interestingly, the turnover frequency and mass-specific activity are significantly enhanced by 10 times and 30 times with increasing Co loading from 5.4 wt% to 21.2 wt% in trans-stilbene epoxidation, respectively. Further theoretical studies reveal that the electronic structure of densely populated Co atoms is altered through charge redistribution, resulting in less Bader charger and higher d-band center, which are demonstrated to be more beneficial for the activation of O₂ and trans-stilbene. The present study demonstrates a new finding about the site interaction in densely populated single-atom catalysts, shedding insight on how density affects the electronic structure and catalytic performance for alkene epoxidation.

The highest oxidation state observed in graphene-supported sub-nanometer iron oxide clusters

Size-selected iron oxide nanoclusters are outstanding candidates for technological-oriented applications due to their high efficiency-to-cost ratio. However, despite many theoretical studies, experimental works on their oxidation mechanism are still limited to gas-phase clusters. Herein we investigate the oxidation of graphene-supported size-selected Fe_n clusters by means of high-resolution X-ray Photoelectron Spectroscopy. We show a dependency of the core electron Fe 2p_3/2 binding energy of metallic and oxidized clusters on the cluster size. Binding energies are also linked to chemical reactivity through the asymmetry parameter which is related to electron density of states at the Fermi energy. Upon oxidation, iron atoms in clusters reach the oxidation state Fe(II) and the absence of other oxidation states indicates a Fe-to-O ratio close to 1:1, in agreement with previous theoretical calculations and gas-phase experiments. Such knowledge can provide a basis for a better understanding of the behavior of iron oxide nanoclusters as supported catalysts.

Tuning the olefin-VOCs epoxidation performance of ceria by mechanochemical loading of coinage metal

Under the background of carbon dioxide emission reduction, how to realize the treatment and the high value-added conversion of typical olefin volatile organic compounds (olefin-VOCs), such as styrene, is a big challenge. In this contribution, the ceria-supported coinage metal catalysts (M/CeO₂, M = Au, Ag, and Cu) are successfully synthesized by a dry mechanochemical method, and their catalytic performance for styrene-VOC epoxidation with tert-butyl hydrogen peroxide (TBHP) as an oxidant to prepare high-value styrene oxide (SO) is investigated. The oxygen vacancies of ceria play a key role in the anchoring of metal nanoparticles. After ball milling, Au(III) is partially reduced and coexists on ceria in two valence states (Au³⁺ and Au⁰), and the reactive oxygen species of the as-prepared catalyst are enhanced. The catalytic behaviors, including solvents effect, substrate concentration, oxidant ratio, catalyst dosage, reaction time, and temperature, are systematically investigated. Au/CeO₂ exhibits good styrene epoxidation performance with a total styrene conversion of 94% and a SO yield of 63%, along with good reusability and substrate scalability. Thermodynamics and kinetics show that Au/CeO₂ was more favorable for styrene epoxidation and this reaction is dominated by the rate of intrinsic chemical reactions on the surface of the catalyst. Based on experimental discussions and a set of characterizations (XPS, XRD, in-situ FT-IR, ESR, ESI-HSMS, etc.), the mechanism is revealed as the synergistic catalysis between the reactive oxygen species of Au/CeO₂ and the peroxide radicals generated by the homolysis of TBHP.

Metal-Organic Frameworks Decorated Cu2O Heterogeneous Catalysts for Selective Oxidation of Styrene

The selective oxidation of styrene with highly efficient, environmentally benign, and cost-effective catalysts are of great importance for sustainable chemical processes. Here, we develop an in situ self-assembly strategy to decorate Cu-based metal-organic framework (MOF) Cu-BDC-NH2 nanocrystals on Cu2O octahedra to construct a series of Cu2O@Cu-BDC-NH2 catalysts for selective oxidation of styrene. Using H2O2 as green oxidants, the optimized sample of Cu2O@Cu-BDC-NH2-8h could achieve 85% styrene conversion with 76% selectivity of benzaldehyde under a mild condition of 40 °C. The high performance of the as-prepared heterogeneous catalysts was attributed to the well-designed Cu+/Cu2+ interface between Cu2O and Cu-BDC-NH2 as well as the porous MOF shells composed of the uniformly dispersed Cu-BDC-NH2 nanocrystals. The alkaline properties of Cu2O and the –NH2 modification of MOFs enable the reaction to be carried out in a base-free condition, which simplifies the separation process and makes the catalytic system more environmentally friendly. Besides the Cu2O octahedra (od-Cu2O), the Cu2O cuboctahedrons (cod-Cu2O) were synthesized by adjusting the added polyvinyl pyrrolidone, and the obtained cod-Cu2O@Cu-BDC-NH2 composite also showed good catalytic performance. This work provides a useful strategy for developing highly efficient and environmentally benign heterogeneous catalysts for the selective oxidation of styrene.