Cooperative Sites in Fully Exposed Pd Clusters for Low-Temperature Direct Dehydrogenation Reaction

Single-cluster anchored on PC6 monolayer as high-performance electrocatalyst for carbon dioxide reduction reaction: First principles study

Tremendous challenges remain to develop high-efficient catalysts for carbon dioxide reduction reaction (CO2RR) owing to the poor activity and low selectivity. However, the activity of catalyst with single active site is limited by the linear scaling relationship between the adsorption energy of intermediates. Motivated by the idea of multiple activity centers, triple metal clusters (M = Cr, Mn, Fe, Co, Ni, Cu, Pd, and Rh) doped PC6 monolayer (M3@PC6) were constructed in this study to investigate the CO2RR catalytic performance via density functional theory calculations. Results shows Mn3@PC6, Fe3@PC6, and Co3@PC6 exhibit high activity and selectivity for the reduction of CO2 to CH4 with limiting potentials of -0.32, -0.28, and -0.31 V, respectively. Analysis on the high-performance origin shows the more binding sites in M3@PC6 render the triple-atom anchored catalysts (TACs) high ability in regulating the binding strength with intermediates by self-adjusting the charges and conformation, leading to the improved performance of M3@PC6 than dual-atom doped PC6. This work manifests the huge application of PC6 based TACs in CO2RR, which hope to prove valuable guidance for the application of TACs in a broader range of electrochemical reactions.

Fully exposed Pt clusters for efficient catalysis of multi-step hydrogenation reactions

For di-nitroaromatics hydrogenation, it is a challenge to achieve the multi-step hydrogenation with high activity and selectivity due to the complexity of the process involving two nitro groups. Consequently, many precious metal catalysts suffer from low activity for this multi-step hydrogenation reaction. Herein, we employ a fully exposed Pt clusters catalyst consisting of an average of four Pt atoms on nanodiamond@graphene (Ptn/ND@G), demonstrating excellent catalytic performance for the multi-step hydrogenation of 2,4-dinitrotoluene. The TOF (40647 h-1) of Ptn/ND@G is significantly superior to that of single Pt atoms catalyst, Pt nanoparticles catalyst, and even all the known catalysts. Density functional theory calculations and absorption experiments reveal that the synergetic interaction between the multiple active sites of Ptn/ND@G facilitate the co-adsorption/activation of reactants and H2, as well as the desorption of intermediates/products, which is the key for the higher catalytic activity than single Pt atoms catalyst and Pt nanoparticles catalyst.

Structural Design of Single-Atom Catalysts for Enhancing Petrochemical Catalytic Reaction Process

Petroleum, as the "lifeblood" of industrial development, is the important energy source and raw material. The selective transformation of petroleum into high-end chemicals is of great significance, but still exists enormous challenges. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites, promise a broad application in petrochemical processes. Herein, the research systematically summarizes the recent research progress of SACs in petrochemical catalytic reaction, proposes the role of structural design of SACs in enhancing catalytic performance, elucidates the catalytic reaction mechanisms of SACs in the conversion of petrochemical processes, and reveals the high activity origins of SACs at the atomic scale. Finally, the key challenges are summarized and an outlook on the design, identification of active sites, and the appropriate application of artificial intelligence technology is provided for achieving scale-up application of SACs in petrochemical process.

Fabrication of highly dispersed Pd-Mn3O4 catalyst for efficient catalytic propane total oxidation

Adjusting the interaction between dual active components for enhancing volatile organic compounds (VOCs) degradation is an effective but still challenging means of air pollution control. Herein, a limited pyrolysis oxidation strategy was adopted to prepare Pd-Mn3O4 spinel catalysts with uniform morphology and active component dispersion. Among these, 1.08Pd-Mn3O4 presented the highest catalytic efficiency with a T90 value of 240 °C, which was 94 °C lower than that of Mn3O4. Characterization and density functional theory (DFT) calculation results revealed that the strong metal-support interaction (SMSI) effect between Pd and Mn3O4 promoted the redistribution of surface charges, thus strengthening the oxidation-reduction ability of the active sites. Moreover, the SMSI effect led to a better migration of surface oxygen species, and boosted the generation of active surface oxygen species. Simultaneously, the Pd catalyst further reduced the energy barrier in the initial stage of the dehydrogenation of propane. Overall, this study provided a novel design strategy for dual active components catalysts with SMSI effect and extended the application of these catalysts in the important field of VOCs elimination.

A low-nuclear Ag4 nanocluster as a customized catalyst for the cyclization of propargylamine with CO2

The preparation of 2-Oxazolidinones using CO2 offers opportunities for green chemistry, but multi-site activation is difficult for most catalysts. Here, A low-nuclear Ag4 catalytic system is successfully customized, which solves the simultaneous activation of acetylene (-C≡C) and amino (-NH-) and realizes the cyclization of propargylamine with CO2 under mild conditions. As expected, the Turnover Number (TON) and Turnover Frequency (TOF) values of the Ag4 nanocluster (NC) are higher than most of reported catalysts. The Ag4* NC intermediates are isolated and confirmed their structures by Electrospray ionization (ESI) and 1H Nuclear Magnetic Resonance (1H NMR). Additionally, the key role of multiple Ag atoms revealed the feasibility and importance of low-nuclear catalysts at the atomic level, confirming the reaction pathways that are inaccessible to the Ag single-atom catalyst and Ag2 NC. Importantly, the nanocomposite achieves multiple recoveries and gram scale product acquisition. These results provide guidance for the design of more efficient and targeted catalytic materials.

High-Density Coordinatively Unsaturated Zn Catalyst for Efficient Alkane Dehydrogenation

The exploration of non-noble metal catalysts for alkane dehydrogenation and their catalytic mechanisms is the priority in catalysis research. Here, we report a high-density coordinatively unsaturated Zn cation (Zncus) catalyst for the direct dehydrogenation (DDH) of ethylbenzene (EB) to styrene (ST). The catalyst demonstrated good catalytic performance (∼40% initial EB conversion rate and >98% ST selectivity) and excellent regeneration ability in the reaction, which is attributed to the high-density (HD) distribution and high-stability structure of Zncus active sites on the surface of zinc silicate (HD-Zncus@ZS). Density functional theory (DFT) calculations further illustrated the reaction pathway and intermediates, supporting that the Zncus sites can efficiently activate the C-H bond of ethyl on ethylbenzene. Developing the high-density Zncus catalyst and exploring the catalytic mechanism laid a good foundation for designing practical non-noble metal catalysts.

Low-Temperature Ethylbenzene Conversion on Rutile TiO2(100) via Photocatalysis: The Strong Photon Energy Dependence

Direct dehydrogenation of alkanes under mild conditions offers a green route to produce valuable olefins, but realizing C-H bond activation at a low temperature presents a significant challenge. Here, photocatalytic ethylbenzene conversion into styrene has been achieved by one hole on rutile (R)-TiO₂(100) at 80 K under 257 and 343 nm irradiation. Although the rates of the initial α-C-H bond activation are nearly the same at the two wavelengths, the rate of the β-C-H bond cleavage is strongly dependent upon hole energy, leading to the much higher yield of 290 K styrene formation at 257 nm, which raises doubt about the simplified TiO₂ photocatalysis model in which excess energy of the charge carrier is useless and highlights the importance of intermolecular energy redistribution in photocatalytic reactions. The result not only advances our understandings in low-temperature C-H bond activation but also calls for the development of a more sophisticated photocatalysis model.

Structure-dependence and metal-dependence on atomically dispersed Ir catalysts for efficient n-butane dehydrogenation

Single-site pincer-ligated iridium complexes exhibit the ability for C-H activation in homogeneous catalysis. However, instability and difficulty in catalyst recycling are inherent disadvantages of the homogeneous catalyst, limiting its development. Here, we report an atomically dispersed Ir catalyst as the bridge between homogeneous and heterogeneous catalysis, which displays an outstanding catalytic performance for n-butane dehydrogenation, with a remarkable n-butane reaction rate (8.8 mol·g_Ir^-1·h^-1) and high butene selectivity (95.6%) at low temperature (450 °C). Significantly, we correlate the BDH activity with the Ir species from nanoscale to sub-nanoscale, to reveal the nature of structure-dependence of catalyst. Moreover, we compare Ir single atoms with Pt single atoms and Pd single atoms for in-depth understanding the nature of metal-dependence at the atomic level. From experimental and theoretical calculations results, the isolated Ir site is suitable for both reactant adsorption/activation and product desorption. Its remarkable dehydrogenation capacity and moderate adsorption behavior are the key to the outstanding catalytic activity and selectivity.

Oxidative dehydrogenation of cyclohexene on atomically precise subnanometer Cu4-nPdn (0 ≤ n ≤ 4) tetramer clusters: the effect of cluster composition and support on performance

The pronounced effects of the composition of four-atom monometallic Cu and Pd and bimetallic CuPd clusters and the support on the catalytic activity and selectivity in the oxidative dehydrogenation of cyclohexene are reported. The ultra-nanocrystalline diamond supported clusters are highly active and dominantly produce benzene; some of the mixed clusters also produce cyclohexadiene, which are all clusters with a much suppressed combustion channel. The also highly active TiO₂-supported tetramers solely produce benzene, without any combustion to CO₂. The selectivity of the zirconia-supported mixed CuPd clusters and the monometallic Cu cluster is entirely different; though they are less active in comparison to clusters with other supports, these clusters produce significant fractions of cyclohexadiene, with their selectivity towards cyclohexadiene gradually increasing with the increasing number of copper atoms in the cluster, reaching about 50% for Cu₃Pd₁. The zirconia-supported copper tetramer stands out from among all the other tetramers in this reaction, with a selectivity towards cyclohexadiene of 70%, which far exceeds those of all the other cluster-support combinations. The findings from this study indicate a positive effect of copper on the stability of the mixed tetramers and potential new ways of fine-tuning catalyst performance by controlling the composition of the active site and via cluster-support interactions in complex oxidative reactions under the suppression of the undesired combustion of the feed.

Photocatalytic Oxidative Dehydrogenation of Propane for Selective Propene Production with TiO2

Oxidative dehydrogenation of propane (ODHP) as an exothermic process is a promising method to produce propene (C₃H₆) with lower energy consumption in chemical industry. However, the selectivity of the C₃H₆ product is always poor because of overoxidation. Herein, the ODHP reaction into C₃H₆ on a model rutile(R)-TiO₂(110) surface at low temperature via photocatalysis has been realized successfully. The results illustrate that photocatalytic oxidative dehydrogenation of propane (C₃H₈) into C₃H₆ can occur efficiently on R-TiO₂(110) at 90 K via a stepwise manner, in which the initial C-H cleavage occurs via the hole coupled C-H bond cleavage pathway followed by a radical mediated C-H cleavage to the C₃H₆ product. An exceptional selectivity of ∼90% for C₃H₆ production is achieved at about 13% propane conversion. The mechanistic model constructed in this study not only advances our understanding of C-H bond activation but also provides a new pathway for highly selective ODHP into C₃H₆ under mild conditions.

Fully-exposed Pt-Fe cluster for efficient preferential oxidation of CO towards hydrogen purification

Hydrogen is increasingly being discussed as clean energy for the goal of net-zero carbon emissions, applied in the proton-exchange-membrane fuel cells (PEMFC). The preferential oxidation of CO (PROX) in hydrogen is a promising solution for hydrogen purification to avoid catalysts from being poisoned by the trace amount of CO in hydrogen-rich fuel gas. Here, we report the fabrication of a novel bimetallic Pt-Fe catalyst with ultralow metal loading, in which fully-exposed Pt clusters bonded with neighbor atomically dispersed Fe atoms on the defective graphene surface. The fully-exposed PtFe cluster catalyst could achieve complete elimination of CO through PROX reaction and almost 100% CO selectivity, while maintaining good stability for a long period. It has the mass-specific activity of 6.19 (molCO)*(gPt)−1*h−1 at room temperature, which surpasses those reported in literatures. The exhaustive experimental results and theoretical calculations reveal that the construction of fully-exposed bimetallic Pt-Fe cluster catalysts with maximized atomic efficiency and abundant interfacial sites could facilitate oxygen activation on unsaturated Fe species and CO adsorption on electron-rich Pt clusters to hence the probability of CO oxidation, leading to excellent reactivity in practical applications.

Low-Temperature C-H Bond Activation via Photocatalysis: Highly Efficient Ethylbenzene Dehydrogenation into Styrene on Rutile TiO2(110)

The direct dehydrogenation of hydrocarbons to olefins under mild conditions is an atom-economical but challenging route. Here, we have investigated photocatalytic ethylbenzene dehydrogenation into styrene on rutile(R)-TiO₂(110) using the temperature-programmed desorption (TPD) method. The results demonstrate that photocatalytic ethylbenzene dehydrogenation into styrene occurs on R-TiO₂(110) in a stepwise manner, in which the initial α-C-H bond cleavage occurs facilely under UV irradiation via a possible homolytic hydrogen atom transfer process and then is followed by the second C-H bond cleavage induced by either photocatalysis at ∼120 K or thermocatalysis at >400 K. With preadsorbed oxygen atoms to eliminate hydrogen atoms from ethylbenzene dehydrogenation and excess electrons on the surface, the yield of styrene is largely enhanced by about 4 times. The results not only demonstrate a photocatalytic route for ethylbenzene dehydrogenation into styrene on R-TiO₂(110) but also advance our understanding of the photocatalytic activation of the saturated C-H bond with TiO₂.

Fully-Exposed Pd Cluster Catalyst: An Excellent Catalytic Antibacterial Nanomaterial

Exploring antibacterial nanomaterials with excellent catalytic antibacterial properties has always been a hot research topic. However, the construction of nanomaterials with robust antibacterial activity at the atomic level remains a great challenge. Here a fully-exposed Pd cluster atomically-dispersed on nanodiamond-graphene (Pd_n /ND@G) with excellent catalytic antibacterial properties is reported. The fully-exposed Pd cluster nanozyme provides atomically-dispersed Pd cluster sites that facilitate the activation of oxygen. Notably, the oxidase-like catalytic performance of the fully-exposed Pd cluster nanozyme is much higher than that of Pd single-atom oxidase mimic, Pd nanoparticles oxidase mimic and even the previously reported palladium-based oxidase mimics. Under the density functional theory (DFT) calculations, the Pd cluster sites can efficiently catalyze the decomposition of oxygen to generate reactive oxygen species, resulting in strong antibacterial properties. This research provides a valuable insight to the design of novel oxidase mimic and antibacterial nanomaterial.

Unique catalytic mechanisms of methanol dehydrogenation at Pd-doped ceria: A DFT+U study

Pd-doped ceria is highly active in promoting oxidative dehydrogenation (ODH) reactions and also a model single atom catalyst (SAC). By performing density functional theory calculations corrected by on-site Coulomb interactions, we systematically studied the physicochemical properties of the Pd-doped CeO₂(111) surface and the catalytic methanol to formaldehyde reaction on the surface. Two different configurations were located for the Pd dopant, and the calculated results showed that doping of Pd will make the surface more active with lower oxygen vacancy formation energies than the pristine CeO₂(111). Moreover, two different pathways for the dehydrogenation of CH₃OH to HCHO on the Pd-doped CeO₂(111) were determined, one of which is the conventional two-step process (stepwise pathway) with the O-H bond of CH₃OH being broken first followed by the C-H bond cleavage, while the other is a novel one-step process (concerted pathway) involving the two H being dissociated from CH₃OH simultaneously even with a lower energy barrier than the stepwise one. With electronic and structural analyses, we showed that the direct reduction of Pd⁴⁺ to Pd²⁺ through the transfer of two electrons can outperform the separated Ce⁴⁺ to Ce³⁺ processes with the help of configurational evolution at the Pd site, which is responsible for the existence of such one-step dehydrogenation process. This novel mechanism may provide an inspiration for constructing ceria-based SAC with unique ODH activities.

Enabling Semihydrogenation of Alkynes to Alkenes by Using a Calcium Palladium Complex Hydride

Selective hydrogenation of alkynes to alkenes requires a catalytic site with suitable electronic properties for modulating the adsorption and conversion of alkyne, alkene as well as dihydrogen. Here, we report a complex palladium hydride, CaPdH₂, featured by electron-rich [PdH₂]^δ- sites that are surrounded by Ca cations that interacts with C₂H₂ and C₂H₄ via σ-bonding to Pd and unusual cation-π interaction with Ca, resulting in a much weaker chemisorption than those of Pd metal catalysts. Concomitantly, the dissociation of H₂ and hydrogenation of C₂H_x (x = 2-4) species experience significant energy barriers over CaPdH₂, which is fundamentally different from those reported Pd-based catalysts. Such a unique catalytic environment enables CaPdH₂, the very first complex transition-metal hydride catalyst, to afford a high alkene selectivity for the semihydrogenation of alkynes.

Atomically dispersed metal catalysts on nanodiamond and its derivatives: synthesis and catalytic application

Atomically dispersed metal catalysts (ADMCs) have attracted increasing interest in the field of heterogeneous catalysis. As sub-nanometric catalysts, ADMCs have exhibited remarkable catalytic performance in many reactions. ADMCs are classified into two categories: single atom catalysts (SACs) and atomically dispersed clusters with a few atoms. To stabilize the highly active ADMCs, nanodiamond (ND) and its derivatives (NDDs) are promising supports. In this Feature Article, we have introduced the advantages of NDDs with a highly curved surface and tunable surface properties. The controllable defective sites and oxygen functional groups are known as the anchoring sites for ADMCs. Tunable surface acid-base properties enable ADMCs supported on NDDs to exhibit unique selectivity towards target products and an extended lifetime in many reactions. In addition, we have firstly overviewed the recent advances in the synthesis strategies for effectively fabricating ADMCs on NDDs, and further discussed how to achieve the atomic dispersion of metal precursors and stabilize the as-formed metal atoms against migration and agglomeration based on NDDs. And then, we have also systematically summarized the advantages of ADMCs supported on NDDs in reactions, including hydrogenation, dehydrogenation, aerobic oxidation and electrochemical reaction. These reactions can also effectively guide the design of ADMCs. The recent progress in understanding the effect of structure of active centers and metal-support interactions (MSIs) on the catalytic performance of ADMCs is particularly highlighted. At last, the possible research directions in ADMCs are forecasted.

A Pt3 cluster anchored on a C2N monolayer as an efficient catalyst for electrochemical reduction of nitrobenzene to aniline: a computational study

A Pt3 cluster anchored on h-C2N exhibits ultra-high catalytic activity towards nitrobenzene reduction with a small limiting potential (−0.19 V).