Probing the Mechanism of Plasmon-Enhanced Ammonia Borane Methanolysis on a CuAg Alloy at a Single-Particle Level

Reinforcing the Efficiency of Plastic Upgrading through Full-Spectrum Photothermal Effect Integration of Heat Isolator

Photoreforming of polyethylene terephthalate (PET) to H2 is practically attractive strategy for upgrading waste plastics. The major challenge is to utilize the infrared energy in the solar spectrum to improve the efficiency for photoreforming of PET to H2. Herein, through the ingenious integration of tungsten phosphide nanoparticles and tungsten single atoms (WP/W SAs) with carbon nitride (g-C3N4), the constructed hybrid inherits both the desirable properties and structural merits of the respective building blocks. Specifically, the photothermal effect of WP/W SAs couples with the "heat isolator" role of g-C3N4 due to its low thermal conductivity, thereby forming localized high-temperature regions, reducing the activation energy and improving the kinetics in the photoreforming of PET to H2. Additionally, the green pretreatment of PET using alkali-free hydrothermal strategy is reported, achieving direct separation of the ethylene glycol and terephthalic acid. This work not only provides an alkali-free hydrothermal pretreatment for PET, but also integrates the photothermal effect with the thermal insulation and opens a new avenue for harnessing solar energy into to convert plastics into H2.

Localized Electron Redistribution in Methanol Molecules over the Sea Urchin-like Tricobalt Tetroxide/Copper Oxide Nanostructures for Fast Hydrogen Release

Catalytic methanolysis of ammonia borane (NH3BH3) is a prospective technology in the field of hydrogen energy in which hydrogen production and hydrogen storage can be integrated together. The splitting of the O-H bond is identified as the rate-determining step (RDS) in this reaction. Thus, a deep understanding of the relationship between the electronic structure of the catalyst, especially the localized electron density of active sites, and the breaking behaviors of the O-H bond is of extreme importance for the rational design of robust catalysts for the reaction. In this work, sea urchin-like tricobalt tetroxide/copper oxide (Co3O4/CuO) nanostructures with rich oxygen vacancies (Ov) were fabricated by a simple synthetic route. In NH3BH3 methanolysis, the optimal Co3O4/CuO sample exhibited ultrahigh catalytic activity with a turnover frequency (TOF) of 87.5 min-1. Interestingly, when NH3BH3 methanolysis was carried out under visible-light illumination, the TOF further increased to 116.4 min-1, which is the highest TOF value among those of the noble-metal-free catalysts ever documented in the literature. Theoretical calculation results evidenced that the Cu site in the Co3O4/CuO sample was in charge of the adsorption and activation of methanol molecules. Both the Ov and visible-light illumination can help electrons on the Cu site flow to the adsorbed methanol molecule, thus leading to localized electron redistribution of the methanol molecule and the extension of the O-H bond. The cooperation of Ov and visible light makes splitting of the O-H bond easier, which is favorable for fast hydrogen release from NH3BH3 methanolysis. This study helps us to gain an insight into the influence of localized electron redistribution of methanol molecules on the RDS, which conduces to the rational design of highly effective nanocatalysts. Moreover, the coinduction strategy for localized electron redistribution with oxygen vacancy engineering and visible-light illumination opens up a route to boost catalytic activity in NH3BH3 methanolysis.

Single-Particle Fluorescence Spectroscopy for Elucidating Charge Transfer and Catalytic Mechanisms on Nanophotocatalysts

Photocatalysis is a cost-effective approach to producing renewable energy. A thorough comprehension of carrier separation at the micronano level is crucial for enhancing the photochemical conversion capabilities of photocatalysts. However, the heterogeneity of photocatalyst nanoparticles and complex charge migration processes limit the profound understanding of photocatalytic reaction mechanisms. By establishing the precise interrelationship between microscopic properties and photophysical behaviors of photocatalysts, single-particle fluorescence spectroscopy can elucidate the carrier separation and catalytic mechanism of the photocatalysts in situ, which provides perspectives for improving the photocatalytic efficiency. This Review primarily focuses on the basic principles and advantages of single-particle fluorescence spectroscopy and its progress in the study of plasmonic and semiconductor photocatalysis, especially emphasizing its importance in understanding the charge separation and photocatalytic reaction mechanism, which offers scientific guidance for designing efficient photocatalytic systems. Finally, we summarize and forecast the future development prospects of single-particle fluorescence spectroscopy technology, especially the insights into its technological upgrading.

Hierarchical Carbon Nanocages as Superior Supports for Photothermal CO2 Catalysis

The exploitation of hierarchical carbon nanocages with superior light-to-heat conversion efficiency, together with their distinct structural, morphological, and electronic properties, in photothermal applications could provide effective solutions to long-standing challenges in diverse areas. Here, we demonstrate the discovery of pristine and nitrogen-doped hierarchical carbon nanocages as superior supports for highly loaded, small-sized Ru particles toward enhanced photothermal CO2 catalysis. A record CO production rate of 3.1 mol·gRu-1·h-1 with above 90% selectivity in flow reactors was reached for hierarchical nitrogen-doped carbon-nanocage-supported Ru clusters under 2.4 W·cm-2 illumination without external heating. Detailed studies reveal that the enhanced performance originates from the strong broadband sunlight absorption and efficient light-to-heat conversion of nanocage supports as well as the excellent intrinsic catalytic reactivity of sub-2 nm Ru particles. Our study reveals the great potential of hierarchical carbon nanocages in photothermal catalysis to reduce the fossil fuel consumption of various industrial chemical processes and stimulates interest in their exploitation for other demanding photothermal applications.

The plasmonic effect of Cu on tuning CO2 reduction activity and selectivity

Copper (Cu) has been widely used for catalyzing the CO2 reduction reaction (CO2RR), but the plasmonic effect of Cu has rarely been explored for tuning the activity and selectivity of the CO2RR. Herein, we conducted a quantitative analysis on the plasmon-generated photopotential (Ehv) of a Cu nanowire array (NA) photocathode and found that Ehv exclusively reduced the apparent activation energy (Ea) of reducing CO2 to CO without affecting the competitive hydrogen evolution reaction (HER). As a result, the CO production rate was enhanced by 52.6% under plasmon excitation when compared with that under dark conditions. On further incorporation with a polycrystalline Si photovoltaic device, the Cu NA photocathode exhibits good stability in terms of photocurrent and syngas production (CO : H2 = 2 : 1) within 10 h. This work validates the crucial role of the plasmonic effect of Cu on modulating the activity and selectivity of the CO2RR.

Visible light-assisted hydrogen generation from ammonia borane over Z-Scheme NiO-CuO heterostructures

The design and fabrication of cheap and high-efficiency catalysts for ammonia borane (AB) hydrolysis for hydrogen production is crucial for its commercial applications. Improvement of the catalytic performance of the catalysts with the assistance of sunlight, a costless resource, is extremely attractive. Herein, we have constructed Z-scheme heterostructured VO-NiO-CuO catalysts with strong interfacial electronic interactions and abundant oxygen vacancies to enhance hydrogen production from NH3BH3 solution under visible light illumination. The as-prepared VO-NiO-CuO catalysts exhibit excellent catalytic activity with a high turnover frequency (TOF) of 35.3 molH2 molcat.-1 min-1 toward AB hydrolysis under visible light. It is demonstrated that excellent catalytic performance is highly related to the effective separation and migration of charge on the catalyst surface. As a result, dual active sites were created, making it easier for various reactants to be adsorbed and activated on the catalyst surface. Furthermore, the density functional theory (DFT) calculations indicate that the adsorption and activation of H2O occurred mainly at the Ni site of VO-NiO-CuO. When the VO-NiO-CuO is irradiated with visible light, the photogenerated electrons assembled on the conduction band were transferred to the O atom through the Ni-O bond, which made the bond length of H2O molecules longer and OH bonds more prone to breaking, thus facilitating AB hydrolysis under illumination. The findings in this work pave the way to design novel and efficient heterostructured catalysts for fast hydrogen release from NH3BH3 under visible light irradiation.

Plasmon-Induced Radical-Radical Heterocoupling Boosts Photodriven Oxidative Esterification of Benzyl Alcohol over Nitrogen-Doped Carbon-Encapsulated Cobalt Nanoparticles

Selective oxidation of alcohols under mild conditions remains a long-standing challenge in the bulk and fine chemical industry, which usually requires environmentally unfriendly oxidants and bases that are difficult to separate. Here, a plasmonic catalyst of nitrogen-doped carbon-encapsulated metallic Co nanoparticles (Co@NC) with an excellent catalytic activity towards selective oxidation of alcohols is demonstrated. With light as only energy input, the plasmonic Co@NC catalyst effectively operates via combining action of the localized surface-plasmon resonance (LSPR) and the photothermal effects to achieve a factor of 7.8 times improvement compared with the activity of thermocatalysis. A high turnover frequency (TOF) of 15.6 h-1 is obtained under base-free conditions, which surpasses all the reported catalytic performances of thermocatalytic analogues in the literature. Detailed characterization reveals that the d states of metallic Co gain the absorbed light energy, so the excitation of interband d-to-s transitions generates energetic electrons. LSPR-mediated charge injection to the Co@NC surface activates molecular oxygen and alcohol molecules adsorbed on its surface to generate the corresponding radical species (e.g., ⋅O2 - , CH3 O⋅ and R-⋅CH-OH). The formation of multi-type radical species creates a direct and forward pathway of oxidative esterification of benzyl alcohol to speed up the production of esters.

Enhancing Photocatalytic-Transfer Semi-Hydrogenation of Alkynes Over Pd/C3 N4 Through Dual Regulation of Nitrogen Defects and the Mott-Schottky Effect

The selective hydrogenation of alkynes is an important reaction; however, the catalytic activity and selectivity in this reaction are generally conflicting. In this study, ultrafine Pd nanoparticles (NPs) loaded on a graphite-like C3 N4 structure with nitrogen defects (Pd/DCN) are synthesized. The resulting Pd/DCN exhibits excellent photocatalytic performance in the transfer hydrogenation of alkynes with ammonia borane. The reaction rate and selectivity of Pd/DCN are superior to those of Pd/BCN (bulk C3 N4 without nitrogen defects) under visible-light irradiation. The characterization results and density functional theory calculations show that the Mott-Schottky effect in Pd/DCN can change the electronic density of the Pd NPs, and thus enhances the hydrogenation selectivity toward phenylacetylene. After 1 h, the hydrogenation selectivity of Pd/DCN reaches 95%, surpassing that of Pd/BCN (83%). Meanwhile, nitrogen defects in the supports improve the visible-light response and accelerate the transfer and separation of photogenerated charges to enhance the catalytic activity of Pd/DCN. Therefore, Pd/DCN exhibits higher efficiency under visible light, with a turnover frequency (TOF) of 2002 min-1 . This TOF is five times that of Pd/DCN under dark conditions and 1.5 times that of Pd/BCN. This study provides new insights into the rational design of high-performance photocatalytic transfer hydrogenation catalysts.

Ternary CdS@MoS2-Co3O4 Multiheterojunction Photocatalyst for Boosting Photocatalytic H2 Evolution

Turning the carrier dynamics in heterojunction photocatalysts is a direct and effective strategy for improving the solar energy conversion efficiency of photocatalysts. Herein, we report a ternary CdS@MoS2-Co3O4 multiheterojunction photocatalyst consisting of the p-n junction of MoS2-Co3O4 and the type-I junction of CdS@MoS2, wherein MoS2 located at the frontier between CdS and Co3O4 acts as an intermediate bridge. The type-I junction allows the directional transfer of photoinduced charge from CdS to MoS2, suppressing the photocorrosion of CdS. Notably, the single-particle photoluminescence technique demonstrates the sequential one-direction hole transfer from MoS2 to Co3O4 aroused by the p-n junction, resulting in a long-lifetime charge separation in the carrier lifetime (54-58 ns). Compared to the bare CdS and type-I CdS@MoS2, the CdS@MoS2-Co3O4 photocatalyst affords a 347-fold and 3.5-fold enhancement of the H2 evolution rate, a quantum efficiency of 28.6% at 450 nm, and a 20 h of long-term stability. This work provides a new understanding of the rational regulation of the charge-transfer mechanism of type-I systems by constructing multiheterojunction photocatalysts.

Promises of Plasmonic Antenna-Reactor Systems in Gas-Phase CO2 Photocatalysis

Sunlight-driven photocatalytic CO2 reduction provides intriguing opportunities for addressing the energy and environmental crises faced by humans. The rational combination of plasmonic antennas and active transition metal-based catalysts, known as "antenna-reactor" (AR) nanostructures, allows the simultaneous optimization of optical and catalytic performances of photocatalysts, and thus holds great promise for CO2 photocatalysis. Such design combines the favorable absorption, radiative, and photochemical properties of the plasmonic components with the great catalytic potentials and conductivities of the reactor components. In this review, recent developments of photocatalysts based on plasmonic AR systems for various gas-phase CO2 reduction reactions with emphasis on the electronic structure of plasmonic and catalytic metals, plasmon-driven catalytic pathways, and the role of AR complex in photocatalytic processes are summarized. Perspectives in terms of challenges and future research in this area are also highlighted.

Water State-Driven Catalytic Hydrolysis of Ammonia Borane on Cu3P-Carbon Dot-Cu Composite

Hydrogen production from ammonia borane (AB) is usually governed by water activation, which is not only energy-intensive but also requires expensive and complicated catalysts. We here propose an integrated photocatalytic-photothermal system that dramatically improves water activation and lowers the transport resistance of H₂ by means of intermediate state water evaporation. This system is constructed by covering nanocomposites (Cu₃P-carbon dots-Cu) upon vertically aligned acetate fibers (VAAFs). As a result of superior hydration effect of VAAFs and local photothermal heating for rapid water evaporation, its hydrogen production efficiency from AB hydrolysis reaches over 10 times the particulate suspension system under solar irradiation. Mechanism analysis reveals that the rapid vaporization of intermediate water promotes the cleavages of O-H bonds in bound water and the adsorption reaction of AB and water molecules at active sites. Therefore, this work provides a novel approach to optimize catalytic reaction in thermodynamics and kinetics for the hydrolysis of AB.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

In Situ Monitoring of the Spatial Distribution of Oxygen Vacancies and Enhanced Photocatalytic Performance at the Single-Particle Level

Oxygen vacancies (OVs) on specific sites/facets can strengthen the interaction between reactants and oxide surfaces, facilitating interfacial charge transfer. However, precise monitoring of the spatial distribution of OVs remains a grand challenge. We report here that a single-particle spectroscopy technique addresses this challenge by establishing a positive correlation relationship between defects and bound exciton luminescence across different facets. Taking monoclinic BiVO₄ as an example, on the basis of theoretical guidance, by in situ tracking the PL lifetimes and PL spectra of different facets on single particles before and after hydrogen treatment, we provide evidence that the PL emission originates from the OV state and determine that OVs is more inclined to be generated at the {010} facets. This anisotropic defect engineering significantly prolongs the lifetime of carriers and accelerates the activation of molecular oxygen. These findings not only verify preference rules of OVs in metal oxides but also provide a time-space-resolved monitoring method.

Research on photocatalytic CO2 conversion to renewable synthetic fuels based on localized surface plasmon resonance: current progress and future perspectives

Due to its desirable optoelectronic properties, localized surface plasmon resonance (LSPR) can hopefully play a promising role in photocatalytic CO2 reduction reaction (CO2RR). In this review, mechanisms and applications of LSPR effect in this field are introduced in detail.

Dual-plasmon-enhanced nitrophenol hydrogenation over W18O49–Au heterostructures studied at the single-particle level

The dual-plasmonic W18O49–Au heterostructure exhibited enhanced catalytic performance in nitrophenol hydrogenation. The HEI process and coupling effect were demonstrated by single-particle spectroscopy and FDTD simulation.

Efficient photothermal-assisted photocatalytic hydrogen production over a plasmonic CuNi bimetal cocatalyst

It is challenging to maximize the utilization of solar energy using photocatalysis or photothermal catalysis alone. Herein, we report a full spectrum solar energy driven photothermal-assisted photocatalytic hydrogen production over CuNi bimetallic nanoparticles co-loaded with graphitized carbon nitride nanosheet layers (Cu_xNi_y/CN) which are prepared by a facile in-situ reduction method. Cu₅Ni₅/CN shows a high hydrogen production rate of 267.8 μmol g^-1 h^-1 at room temperature, which is 70.5 and 1.34 times of that for pure CN (3.8 μmol g^-1 h^-1) and 0.5 wt% Pt/CN (216 μmol g^-1 h^-1), respectively. The photothermal catalytic hydrogen activity can be further increased by 3.7 times when reaction solution is external heated to 100 °C. For the photothermal catalytic system, the local surface plasmon resonance (LSPR) effect over active Cu nanoparticles can absorb near-infrared light to generate hot electrons, which are partially quenched to generate heat for heating of the reaction system and partially transported to the active sites, where the Ni nanoparticles as another functional component couple the electrons and heat to finally promote the photothermal catalytic activity. Our result suggests that a rational design of the catalyst with bifunctional atomic components can photothermocatalysis-assisted photocatalysis to maximize utilization solar energy for efficient full spectrum conversion.