MIL-101 as Reusable Solid Catalyst for Autoxidation of Benzylic Hydrocarbons in the Absence of Additional Oxidizing Reagents

Opportunities of MXenes in Heterogeneous Catalysis: V2C as Aerobic Oxidation Catalyst

MXenes are two-dimensional nanomaterials having alternating sheets of one atom-thick early transition metal layer and one atom-thick carbide or nitride layer. The external surface contains termination groups, whose nature depends on the etching agent used in the preparation procedure from the MAX phase. The present concept proposes that, due to their composition, the metal-surface termination groups make MXenes particularly suited as heterogeneous catalysts for some reactions. This proposal comes from the consideration that early transition metal atoms bonded to hydroxyl and oxo groups are a general type of active sites in heterogeneous catalysis and that similar catalytic centers can also be present in the MXene structure. After having presented the concept, we have selected V2C Mxene as an example to illustrate its catalytic activity and to show how the catalytic performance varies when the surface groups are modified. As a test reaction, we selected the aerobic oxidation of indane to the corresponding indanol/indanone mixture using molecular oxygen as terminal oxidizing reagent. Two previously reported procedures to modify the surface groups, namely surface dehydroxylation by thermal treatment under diluted hydrogen flow and surface oxidation with ammonium persulfate to convert some surface groups into oxo groups were used, observing in both cases a decrease in the catalytic activity of V2C. Based on this, VIII/IV-OH are proposed as catalytic centers in this aerobic oxidation. Overall, the present concept shows the merits of MXenes in heterogeneous catalysis, based on their chemical composition and the surface functionality.

Insights into the sacrificial structure-activity relationship of a Ti-based metal-organic framework in an oxidative desulfurization reaction

Insights into the relationship between the crystal structure and activity of metal-organic frameworks (MOFs) are meaningful to investigate the potential properties of pristine MOFs for targeted catalytic reactions. Herein, we develop a high-efficiency method for boosting the oxidative desulfurization (ODS) activity of Ti-MOF in the presence of H+. The ODS activity of pristine Ti-MOF prepared via a solvothermal approach is very poor at a low reaction temperature but can be enhanced in the presence of H+. Ti-MOF in the presence of H+ shows ultrahigh ODS activity that can eliminate 1000 ppm sulfur after 7 min at 30 °C with no catalytic activity loss after recycling 11 times. The turnover frequency value reaches 12.4 h-1 at 30 °C, surpassing all the previously reported Ti-MOFs as ODS catalysts even at high temperatures. Characterization and quenching experimental results indicate that more uncoordinated Ti sites can be formed from slight damage to the structure of Ti-MOF during the catalytic reaction, and such exposed Ti sites can easily react with H+ and H2O2 to form Ti-hydroperoxo active species that determine the upgradation of ODS activity. This work provides a significant way to upgrade the catalytic activity of pristine Ti-MOFs for future application.

Defect-Mediated Synergistic Effect of POM/UiO-66(Zr) Host-Guest Catalysts for Robust Deep Desulfurization at Ambient Temperature

Stable platforms of host-guest catalysts are indispensable in the field of heterogeneous catalysis, however, clarifying the specific effect of host remains challenging. Herein, polyoxometalate (POM) is encapsulated in three types of UiO-66(Zr) with different controlled densities of defects by the aperture opening and closing strategy at ambient-temperature. It is found that catalytic activity of POM for oxidative desulfurization (ODS) at room temperature is turned on when encapsulated in the defective UiO-66(Zr), and the sulfur oxidation efficiency shows an obvious increasing trend (from 0.34 to 10.43 mmol g-1 h-1 ) with the increased concentration of defects in UiO-66(Zr) host. The as-prepared catalyst with the most defective host displays ultrahigh performance which removed 1000 ppm sulfur with exceptionally diluted oxidant at room-temperature within 25 min. The turnover frequency can reach 620.0 h-1 at 30 °C, which surpassed all the reported MOFs based ODS catalysts. A substantial guest/host synergistic effect mediated by the defective sites in UiO-66(Zr) is responsible for the enhancement. Density functional theory calculations reveal that OH/OH2 capped on the open Zr sites of host UiO-66(Zr) can decompose H2 O2 to OOH group and enables the formation of WVI -peroxo intermediates that determine the ODS activity.

Intermetallic Copper-Based Electride Catalyst with High Activity for C-H Oxidation and Cycloaddition of CO2 into Epoxides

Inorganic electrides have been proved to be efficient hosts for incorporating transition metals, which can effectively act as active sites giving an outstanding catalytic performance. Here, it is demonstrated that a reusable and recyclable (for more than 7 times) copper-based intermetallic electride catalyst (LaCu0.67 Si1.33 ), in which the Cu sites activated by anionic electrons with low-work function are uniformly dispersed in the lattice framework, shows vast potential for the selective C-H oxidation of industrially important hydrocarbons and cycloaddition of CO2 with epoxide. This leads to the production of value-added cyclic carbonates under mild reaction conditions. Importantly, the LaCu0.67 Si1.33 catalyst enables much higher turnover frequencies for the C-H oxidation (up to 25 276 h-1 ) and cycloaddition of CO2 into epoxide (up to 800 000 h-1 ), thus exceeding most nonnoble as well as noble metal catalysts. Density functional theory investigations have revealed that the LaCu0.67 Si1.33 catalyst is involved in the conversion of N-hydroxyphthalimide (NHPI) into the phthalimido-N-oxyl (PINO), which then triggers selective abstraction of an H atom from ethylbenzene for the generation of a radical susceptible to further oxygenation in the presence of O2 .

Two Copper-Containing Polyoxometalate-Based Metal-Organic Complexes as Heterogeneous Catalysts for the C-H Bond Oxidation of Benzylic Compounds and Olefin Epoxidation

Using a one-pot assembly method, two novel copper-containing Keggin-type polyoxometalates (POMs)-based metal-organic complexes, that is, [Cu^II₂(pbba)₂NO₃^-(H₂O)₂(PW₁₂O₄₀)]·3H₂O [PW₁₂-Cu-pbba, H₂pbba = 1,1'-(1,4-phenylene-bis(methylene))-bis(pyridine-3-carboxylic acid)] and [Cu^II₂(pbba)₂(H₂O)₂(GeW₁₂O₄₀)]·3H₂O (GeW₁₂-Cu-pbba), were successfully synthesized. These two complexes are isostructural, differing only in their POM components. They are applicable as heterogeneous catalysts for the C-H bond oxidation of benzylic compounds and olefin epoxidation under mild conditions, with oxygen as the oxidant and isobutyraldehyde as the coreductant. The catalytic activity of PW₁₂-Cu-pbba was superior to that of GeW₁₂-Cu-pbba. Under the optimal conditions, PW₁₂-Cu-pbba catalyzed the oxidation of indane into 1-indanone with an 81% yield and >99% selectivity within 48 h. As heterogeneous catalysts, both complexes demonstrated excellent recoverability and high stability and could be stably reused five times without significant activity loss.

Recent developments in MIL-101 metal organic framework for heterogeneous catalysis

Metal organic frameworks (MOFs) are currently gaining considerable attention as heterogeneous catalysts. Since the functionality of the framework and the pore size of the MOFs can be adjusted over a wide range for various catalytic reactions, the usage of these materials as solid catalysts is attractive. One of the preferred catalytic mesoMOFs is MIL-101 (MIL: Material of Institute Lavoisier) family which has been mainly investigated. The large surface area, high pore volumes, and acceptable solvent/thermal stability (MIL-101(Cr) up to 300 °C) have led the MIL-101 family to be considered an ideal and widespread MOF for use as a great heterogeneous catalyst or solid support for a variety of reactions. The objective of this review is to present recent research on the use of the MIL-101 family for heterogeneous catalysis in gas and liquid phase reactions.

Metal Organic Frameworks as Heterogeneous Catalysts in Olefin Epoxidation and Carbon Dioxide Cycloaddition

Metal–organic frameworks (MOFs) are a family of porous crystalline materials that serve in some cases as versatile platforms for catalysis. In this review, we overview the recent developments about the use of these species as heterogeneous catalysts in olefin epoxidation and carbon dioxide cycloaddition. We report the most important results obtained in this field relating them to the presence of specific organic linkers, metal nodes or clusters and mixed-metal species. Recent advances obtained with MOF nanocomposites were also described. Finally we compare the results and summarize the major insights in specific Tables, outlining the major challenges for this emerging field. This work could promote new research aimed at producing coordination polymers and MOFs able to catalyse a broader range of CO2 consuming reactions.

Thermal Treatment Effect on CO and NO Adsorption on Fe(II) and Fe(III) Species in Fe3O-Based MIL-Type Metal-Organic Frameworks: A Density Functional Theory Study

The properties of metal–organic frameworks (MOFs) based on triiron oxo-centered (Fe₃O) metal nodes are often related to the efficiency of the removal of the solvent molecules and the counteranion chemisorbed on the Fe₃O unit by postsynthetic thermal treatment. Temperature, time, and the reaction environment play a significant role in modifying key features of the materials, that is, the number of open metal sites and the reduction of Fe(III) centers to Fe(II). IR spectroscopy allows the inspection of these postsynthetic modifications by using carbon monoxide (CO) and nitric oxide (NO) as probe molecules. However, the reference data sets are based on spectra recorded for iron zeolites and oxides, whose structures are different from the Fe₃O one. We used density functional theory to study how the adsorption enthalpy and the vibrational bands of CO and NO are modified upon dehydration and reduction of Fe₃O metal nodes. We obtained a set of theoretical spectra that can model the modification observed in previously reported experimental spectra. Several CO and NO bands were previously assigned to heterogeneous Fe(II) and Fe(III) sites, suggesting a large defectivity of the materials. On the basis of the calculations, we propose an alternative assignment of these bands by considering only crystallographic iron sites. These findings affect the common description of Fe₃O-based MOFs as highly defective materials. We expect these results to be of interest to the large community of scientists working on Fe(II)- and Fe(III)-based MOFs and related materials.

Thermal treatment of triiron oxo-centered (Fe₃O)-based metal−organic frameworks is a common postsynthetic method to determine the material performances in many applications: we used density functional theory methods to study how the efficacy of the treatment modifies the energetics and the vibrational bands of nitric oxide (NO) and carbon monoxide. The obtained data set is meant to be part of the characterization toolboxes aimed at the assessment of thermal treatment protocols.

Cooperative Interplay of Brønsted Acid and Lewis Acid Sites in MIL-101(Cr) for Cross-Dehydrogenative Coupling of C-H Bonds

Cross-dehydrogenative coupling (CDC) is an effective tool for carbon-carbon bond formation in chemical synthesis. Herein, we report a metal-organic framework (MOF) possessing dual Lewis acidic Cr sites and sulfonic acid sites (MIL-101(Cr)-SO₃H) as an efficient catalytic material for direct cross-coupling of xanthene and different nucleophiles using O₂ as the oxidant. The highly porous structure of MIL-101(Cr)-SO₃H enables the free access of reactants to the catalytic active sites inside MOF pores. Kinetic studies indicated that the Cr sites of MOF accelerate the rate-limiting autoxidation reaction of xanthene, which synergistically work with the sulfonic acid group on MOF ligands in promoting the CDC reactions. Besides, the catalytic system shows excellent functional group compatibility, and a variety of valuable xanthene derivatives were synthesized with satisfactory yields. Furthermore, MIL-101(Cr)-SO₃H can be reused and its catalytic activity and crystal structure remain after six consecutive runs.

Microwave-Assisted Air Epoxidation of Mixed Biolefins over a Spherical Bimetal ZnCo-MOF Catalyst

Here, we report the synthesis of spherical bimetal ZnCo-MOF materials by a hydrothermal rotacrystallization method and their catalytic activity on the air epoxidation of mixed biolefins enhanced by microwaves. The structural and chemical properties of the ZnCo-MOF materials were fully characterized by XRD, IR, SEM, TG, XPS, and NH₃-TPD. The morphology of the material exhibited a three-dimensional spherical structure. From an NH₃-TPD test of the ZnCo-MOF catalyst, it could be concluded that the Zn_0.1Co₁-MOF-H-150 rpm material had the highest acidic content and the strongest acidity among the catalysts synthesized by different methods, which gave the best performance in the epoxidation of mixed biolefins. The air epoxidation reaction was carried out under atmospheric pressure and microwave conditions, in the absence of any initiator or coreducing agent. Moreover, the Zn_0.1Co₁-MOF catalyst could be recycled six times without reducing the catalytic activity significantly, which showed the stability of spherical catalyst material under microwaves.

Size-matched polyoxometalate encapsulated in UiO-66(Zr): an extraordinary catalyst with double active sites for the highly efficient ultra-deep oxidative desulfurization of fuel oil

In this study, for the first time, we selected a size-matched polyoxometalate α-Mo8O26, and successfully prepared Mo8-UiO-66(Zr) as a catalyst with double active sites for extractive and catalytic oxidative desulfurization systems (ECODS).

MOF-Based Membranes for Gas Separations

Metal-organic frameworks (MOFs) represent the largest known class of porous crystalline materials ever synthesized. Their narrow pore windows and nearly unlimited structural and chemical features have made these materials of significant interest for membrane-based gas separations. In this comprehensive review, we discuss opportunities and challenges related to the formation of pure MOF films and mixed-matrix membranes (MMMs). Common and emerging separation applications are identified, and membrane transport theory for MOFs is described and contextualized relative to the governing principles that describe transport in polymers. Additionally, cross-cutting research opportunities using advanced metrologies and computational techniques are reviewed. To quantify membrane performance, we introduce a simple membrane performance score that has been tabulated for all of the literature data compiled in this review. These data are reported on upper bound plots, revealing classes of MOF materials that consistently demonstrate promising separation performance. Recommendations are provided with the intent of identifying the most promising materials and directions for the field in terms of fundamental science and eventual deployment of MOF materials for commercial membrane-based gas separations.

CuII- and CoII-Based MOFs: {[La2Cu3(µ-H2O)(ODA)6(H2O)3]∙3H2O}n and {[La2Co3(ODA)6(H2O)6]∙12H2O}n. The Relevance of Physicochemical Properties on the Catalytic Aerobic Oxidation of Cyclohexene

The aerobic oxidation of cyclohexene was done using the heterometallic metal organic frameworks (MOFs) {[La2Cu3(μ-H2O)(ODA)6(H2O)3]⋅3H2O}n (LaCuODA)) (1) and {[La2Co3(ODA)6(H2O)6]∙12H2O}n (LaCoODA) (2) as catalysts, in solvent free conditions (ODA, oxydiacetic acid). After 24 h of reaction, the catalytic system showed that LaCoODA had a better catalytic performance than that of LaCuODA (conversion 85% and 67%). The structures of both catalysts were very similar, showing channels running along the c axis. The physicochemical properties of both MOFs were determined to understand the catalytic performance. The Langmuir surface area of LaCoODA was shown to be greater than that of LaCuODA, while the acid strength and acid sites were greater for LaCuODA. On the other hand, the redox potential of the active sites was related to CoII/CoIII in LaCoODA and CuII/CuI in LaCuODA. Therefore, it is concluded that the Langmuir surface area and the redox potentials were more important than the acid strength and acid sites of the studied MOFs, in terms of the referred catalytic performance. Finally, the reaction conditions were also shown to play an important role in the catalytic performance of the studied systems. Especially, the type of oxidant and the way to supply it to the reaction medium influenced the catalytic results.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

MIL-101(Cr) for CO2 Conversion into Cyclic Carbonates, Under Solvent and Co-Catalyst Free Mild Reaction Conditions

Mild reaction conditions (nearly room temperature and atmospheric CO2 pressure) for the cycloaddition of CO2 with epoxides to produce cyclic carbonates were investigated applying MIL-101(Cr) as a catalyst. The MIL-101 catalyst contains strong acid sites, which promote the ring-opening of the epoxide substrate. Moreover, the high surface area, enabling the adsorption of more CO2 (substrate), combined with a large pore size of the catalyst is essential for the catalytic performance. Additionally, epoxide substrates bearing electron-withdrawing substituents or having a low boiling point demonstrated an excellent conversion towards the cyclic carbonates. MIL-101(Cr) for the cycloaddition of carbon dioxide with epoxides is demonstrated to be a robust and stable catalyst able to be re-used at least five times without loss in activity.

Influence of the channel size of isostructural 3d–4f MOFs on the catalytic aerobic oxidation of cycloalkenes

The present work reports a new group of heterogeneous catalysts with a 3D structure, CuLnIDA, {[Cu₃Ln₂(IDA)₆]·8H₂O} (Ln: La^III, Gd^III or Yb^III), with an organic linker (H₂IDA: iminodiacetic acid).

Interfacial CoOx Layers on TiO2 as an Efficient Catalyst for Solvent-Free Aerobic Oxidation of Hydrocarbons

Construction of efficient interfaces to improve the performance of supported metal catalysts is a challenging but effective technique. A newly synthesized catalyst with layered cobalt oxide on the surface of titania (layer-CoO_x /TiO₂ ) is highly selective towards the aerobic oxidation of C-H bonds in a series of hydrocarbons under sustainable conditions. The layer-CoO_x /TiO₂ easily outperforms the state-of-the-art noble metal catalysts and homogeneous cobalt salts used in industry. In-depth structural and functional characterization reveal that the layer-CoO_x /TiO₂ readily reacts with O₂ for the adsorption and activation of C-H bonds. The layered structure of CoO_x can maximize the interfacial effect of CoO_x /TiO₂ leading to a good performance for the oxidation of C-H bonds.

Heterometallic CuII/LnIII polymers active in the catalytic aerobic oxidation of cycloalkenes under solvent-free conditions

Heterometallic 3d-4f inorganic polymers were prepared using 3,5 pyridinedicarboxylic acid (H2PDC), {[CuLn2(PDC)2(SO4)2(H2O)6]·H2O}n (Ln: SmIII, CuSmPDC, EuIII, CuEuPDC, GdIII, and CuGdPDC). These catalysts are active in the aerobic oxidation of cycloalkenes under solvent-free conditions, with a conversion for the oxidation of cyclohexene of 71% after one hour of the reaction, and a TOF value of 1438 h-1 for CuSmPDC. On the other hand, the oxidation of cycloheptene and cyclooctene exhibited slightly lower conversions of 52% and 47%, and TOF values of 1053 and 159 h-1 after 1 and 6 hours of the reaction, respectively. The radical mechanism for the oxidation reaction of cyclohexene was assessed by Raman and EPR spectroscopy. The first evidenced the formation of Cu-O2 adducts and the second permitted is to observe the presence of the oxygen centered radical species, which act as initiators of the reaction chain to generate the products. An increase in the temperature of the reaction correlates with the adduct formation, and with the enhancement of the oxidation reaction.

Study on the copper(II)-doped MIL-101(Cr) and its performance in VOCs adsorption

The metal-organic framework (MOF) materials, MIL-101(Cr), and copper-doped MIL-101(Cr) (Cu@MIL-101(Cr)) were prepared through hydrothermal method and were used to remove volatile organic compounds (VOCs) in this study. Morphological characterization demonstrated that MIL-101(Cr) and Cu-3@MIL-101(Cr) were octahedral crystal, with specific surface area of 3367 and 2518 m²/g, respectively. The results of XRD, TG, and FTIR showed that the copper doping procedure would not alter the skeleton structure, but it would affect the crystallinity and thermal stability of MIL-101(Cr). Besides, MIL-101(Cr) and Cu-3@MIL-101(Cr) displayed good removal efficiencies on benzene sorption, and the maximum sorption capacity was 103.4 and 114.4 mg/g, respectively. In competitive adsorptions, the order of adsorption priority on Cu-3@MIL-101(Cr) was as follows: ethylbenzene > toluene > benzene. Hence, it could be concluded that MIL-101(Cr) and copper-doped MIL-101(Cr) demonstrated good performance in VOCs adsorption and showed a promising potential for large-scale applications in the removal of VOCs. Graphical abstract ᅟ.

Composites based on heparin and MIL-101(Fe): the drug releasing depot for anticoagulant therapy and advanced medical nanofabrication

We describe the synthesis and properties of a new composite material based on heparin and MIL-101(Fe) metal-organic framework. The intrinsic instability of MIL-101(Fe) towards hydrolysis enables binding of heparin molecules to the framework structure as is evidenced by DFT calculations and adsorption experiments. The de novo formed heparin-MOF composites showed good biocompatibility in in vitro and demonstrated pronounced anticoagulant activity. The specific interaction between the bioactive molecule and the carrier is critical for the selective degradation of the complex in the body fluids and for the enhanced activity. Hep_MIL-101(Fe) composite could serve as a drug-releasing depot for nanofabrication and to introduce anticoagulant activity to medical devices and biocoatings. Addition of Hep_MIL-101(Fe) to a sol-gel derived thrombolytic matrix allowed the combination of anticoagulant and thrombolytic activities in a single hybrid nanomaterial that could be applied as a bioactive nanocoating for PTFE vein implants.

Metal-organic and covalent organic frameworks as single-site catalysts

Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions.

Structure activity relationships in metal–organic framework catalysts for the continuous flow synthesis of propylene carbonate from CO2 and propylene oxide

Studies of MOF catalysts under continuous flow have led to the discovery of a new catalyst for carbonation of propylene oxide.

An efficient approach for enhancing the catalytic activity of Ni-MOF-74 via a relay catalyst system for the selective oxidation of benzylic C–H bonds under mild conditions

A facile and efficient approach for enhancing the catalytic activity of Ni-MOF-74 via a relay catalysis strategy with [bmim]Br was developed, which is excellent for the selective oxidation of benzylic C–H bond under mild conditions.

An imidazolium-functionalized mesoporous cationic metal–organic framework for cooperative CO2 fixation into cyclic carbonate

A mesoporous cationic Cr-based metal–organic framework (MOF), FJI-C10, has been obtained and exhibited excellent performances in chemical fixation of CO₂ into cyclic carbonates under co-catalyst free and mild conditions.