Au–Pd Nanoparticles Dispersed on Composite Titania/Graphene Oxide-Supports as a Highly Active Oxidation Catalyst

Enhancing Photoredox Catalysis in Aqueous Environments: Ruthenium Aqua Complex Derivatization of Graphene Oxide and Graphite Rods for Efficient Visible-Light-Driven Hybrid Catalysts

A ruthenium aqua photoredox catalyst has been successfully heterogeneneized on graphene oxide (GO@trans-fac-3) and graphite rods (GR@trans-fac-3) for the first time and have proven to be sustainable and easily reusable systems for the photooxidation of alcohols in water, in mild and green conditions. We report here the synthesis and total characterization of two Ru(II)-polypyridyl complexes, the chlorido trans-fac-[RuCl(bpea-pyrene)(bpy)](PF6) (trans-fac-2) and the aqua trans-fac-[Ru(bpea-pyrene)(bpy)OH2](PF6)2 (trans-fac-3), both containing the N-tridentate, 1-[bis(pyridine-2-ylmethyl)amino]methylpyrene (bpea-pyrene), and 2,2'-bipyridine (bpy) ligands. In both complexes, only a single isomer, the trans-fac, has been detected in solution and in the solid state. The aqua complex trans-fac-3 displays bielectronic redox processes in water, assigned to the Ru(IV/II) couple. The trans-fac-3 complex has been heterogenized on different types of supports, (i) on graphene oxide (GO) through π-stacking interactions between the pyrene group of the bpea-pyrene ligand and the GO and (ii) both on glassy carbon electrodes (GC) and on graphite rods (GR) through oxidative electropolymerization of the pyrene group, which yield stable heterogeneous photoredox catalysts. GO@trans-fac-3- and GR/poly trans-fac-3-modified electrodes were fully characterized by spectroscopic and electrochemical methods. Trans-fac-3 and GO@trans-fac-3 photocatalysts (without a photosensitizer) showed good catalytic efficiency in the photooxidation of alcohols in water under mild conditions and using visible light. Both photocatalysts display high selectivity values (>99%) even for primary alcohols in accordance with the presence of two-electron transfer processes (2e-/2H+). GO@trans-fac-3 keeps intact its homogeneous catalytic properties but shows an enhancement in yields. GO@trans-fac-3 can be easily recycled by filtration and reused for up to five runs without any significant loss of catalytic activity. Graphite rods (GR@trans-fac-3) were also evaluated as heterogeneous photoredox catalysts showing high turnover numbers (TON) and selectivity values.

Palladium-based pseudohomogeneous catalyst for highly selective aerobic oxidation of benzylic alcohols to aldehydes

This study presents a novel class of pseudohomogeneous catalysts (PHC) based on carbon quantum dots functionalized with terpyridine ligands (CQDs-Tpy) to immobilize and stabilize palladium nanoparticles (Pd NPs). Extensive characterization techniques clearly confirmed the successful stabilization of Pd NPs on CQDs-Tpy. The effectiveness of the catalyst was demonstrated in the selective aerobic oxidation of primary and secondary of benzylic alcohols to aldehydes in the absence of additives and phase transfer catalyst (PTC). Remarkably, the reactions predominantly yielded aldehydes without further oxidation to carboxylic acids. By employing low catalyst loadings (0.13 mol%), high conversions (up to 89%) and excellent selectivity (> 99%) of the aldehyde derivatives were achieved. Moreover, the CQDs-Tpy/Pd NPs catalyst displayed suitable catalytic activity and recyclability, offering potential economic advantages. This promising approach opens up new opportunities in the field of catalysis for designing subnanometric metal-based PHCs.

Efficient Doping Induced by Charge Transfer at the Hetero-Interface to Enhance Photocatalytic Performance

The construction of heterojunction photocatalysts is an effective method to improve photocatalytic efficiency since the potential gradient and built-in electron field established at the junction could enhance the efficiency of charge separation and interfacial charge transfer. Nevertheless, heterojunction photocatalysts with strong built-in electron fields remain difficult to build since the two adjacent constitutes must be satisfied with an appropriate band alignment, redox potential, and carrier concentration gradient. Here, an efficient charge transfer-induced doping strategy is proposed to enhance the heterojunction built-in electron field for stable and efficient photocatalytic performance. Carrier transfer tests show that the rectification ratio of the n-TiO_2-X/n-BiOI heterojunction is significantly enhanced after being coated with graphene oxide (GO). Consequently, both the hydrogen production and photodegradation performance of the GO composite heterojunction are considerably enhanced compared with pure TiO_2-X, BiOI, and n-TiO_2-X/n-BiOI. This work provides a facile method to prepare heterojunction photocatalysts with a high catalytic activity.

Advances in Graphene/Inorganic Nanoparticle Composites for Catalytic Applications

Graphene-based nanocomposites with inorganic (metal and metal oxide) nanoparticles leads to materials with high catalytic activity for a variety of chemical transformations. Graphene and its derivatives such as graphene oxide, highly reduced graphene oxide, or nitrogen-doped graphene are excellent support materials due to their high surface area, their extended π-system, and variable functionalities for effective chemical interactions to fabricate nanocomposites. The ability to fine-tune the surface composition for desired functionalities enhances the versatility of graphene-based nanocomposites in catalysis. This review summarizes the preparation of graphene/inorganic NPs based nanocomposites and their use in catalytic applications. We discuss the large-scale synthesis of graphene-based nanomaterials. We have also highlighted the interfacial electronic communication between graphene/inorganic nanoparticles and other factors resulting in increased catalytic efficiencies.

Gold-coated iron oxide core–shell nanostructures for the oxidation of indoles and the synthesis of uracil-derived spirooxindoles

Synthesis of isatins and uracil-based spirooxindoles catalysed by Au/Fe3O4 core–shell nanoparticles under mild conditions and low reaction times.

Insight into Au/ZnO catalyzed aerobic benzyl alcohol oxidation by modulation–excitation attenuated total reflection IR spectroscopy

The chemisorbed or dissociated oxygen species is associated with the catalytic activity in alcohol oxidation catalyzed by Au/ZnO catalysts.

Modulating the electrocatalytic CO2 reduction performances of bismuth nanoparticles with carbon substrates with controlled degrees of oxidation

The catalytic performances of metal nanoparticles can be widely tuned and promoted by the metal-support interactions. Here, we report that the morphologies and electrocatalytic CO₂ reduction reaction (CO₂RR) properties of bismuth nanoparticles (BiNPs) can be rationally modulated by their interactions with carbon black (CB) supports by controlling the degree of surface oxidation. Appropriately oxidized CB supports can provide sufficient oxygen-containing groups for anchoring BiNPs with tunable sizes and surface areas, desirable key intermediate adsorption abilities, appropriate surface wettability, and adequate electron transfer abilities. As a result, the optimized Bi/CB catalysts exhibited a promoted CO₂RR performance with a Faradaic efficiency of 94% and a current density of 16.7 mA cm^-2 for HCOO^- at -0.9 V versus a reversible hydrogen electrode. Our results demonstrate the significance of regulating the interactions between supports and metal nanoparticles for both synthesis of the catalyst and electrolysis applications, which may find broader applicability in more electrocatalyst designs.

Rational Design of Self-Supported CuO x -Decorated Composite Films as an Efficient and Easy-Recycling Catalyst for Styrene Oxidation

The applications of graphene-based materials in catalysis are limited by their strong tendency to aggregate, which may lead to a decrease in active sites. Herein, we propose a facile and controllable strategy to fabricate a series of heterogeneous catalysts with a unique nanostructure wherein CuO _x -decorated reduced graphene oxide (rGO) sheets are incorporated into a solid matrix composed of poly(vinylpyrrolidone) (PVP) and carboxymethyl cellulose (CMC). The resultant materials are self-supported films and could be directly used as catalysts for the liquid-phase oxidation of styrene without the requirement for extra substrates. The employment of PVP-CMC (PC) as the support for CuO _x -decorated rGO sheets successfully inhibits their aggregation. Benefiting from the dispersion of copper species, these films exhibit good catalytic activity and recyclability under mild reaction conditions. Especially, they can be conveniently removed from the reaction mixture by tweezers due to their structural stability. For catalyzing multiple reactions with high efficiency and facile recyclability, this study offers a universal strategy to design heterogeneous catalysts based on graphene materials and provides a promising platform.

Selectively coupled small Pd nanoparticles on sp2-hybridized domain of graphene-based aerogel with enhanced catalytic activity and stability

The precisely coupling of metal nanoparticles with support domain are crucial to enhance the catalytic activity and stability of supported metal nanoparticle catalysts (MNPs). Here we selectively anchor Pd nanoparticles to the sp² domain in graphene-based aerogel constructed with base-washed graphene oxide (BGO) by removing oxidative debris (OD). The effects of OD on the size and chemical composition of Pd nanoparticles in aerogels are initially unveiled. The removal of OD nanoparticles prompt selective coupling of Pd nanoparticles to the exposed sp²-hybridized domain on BGO nanosheets, and then prevent it from agglomeration. As a result, the Pd nanoparticle size of self-assembled Pd/BGA is 4.67 times smaller than that of traditional Pd/graphene oxide aerogel (Pd/GA). The optimal catalytic activity of Pd/BGA for the model catalytic reduction of 4-nitrophenol is 15 times higher than that of Pd/GA. Pd/BGA could maintain its superior catalytic activity and achieves 98.72% conversion in the fifth cycle. The superior catalytic performance could be ascribed to the small Pd nanoparticles and high percentage of Pd(0) in Pd/BGA, and the enhanced electronic conductivity of Pd/BGA. These integrated merits of Pd/BGA as heterogeneous catalysts are attributed to selectively anchor Pd nanoparticles on sp²-hybridized domain of graphene-based aerogel, and strongly coupled interaction of MNPs with support. The structure-regulated BGO nanosheets could serve as versatile building blocks for fabricating MNPs/graphene aerogels with superior performance for catalytic transformation of water pollutants.

Au-Pd nanoparticles immobilized on TiO2 nanosheet as an active and durable catalyst for solvent-free selective oxidation of benzyl alcohol

TiO₂nanocrystals with controlled facets have been extensively investigated due to their excellent photocatalytic performance in sustainable and green energy field. However, the applications in thermal catalysis without applying UV irradiation are comparably less and the identification of their intrinsic roles, especially the different catalytic behaviors of each crystal facet, remains not fully recognized. In this study, bimetallic AuPd nanoparticles supported on anatase TiO₂ nanosheets exposing {001} facets or TiO₂ nanospindles exposing {101} as a catalyst were prepared by sol-immobilization method and used for solvent-free benzyl alcohol oxidation. The experimental results indicated that the exposed facet of the support has a significant effect on the catalytic performance. AuPd/TiO₂-001 catalyst exhibited a higher benzyl alcohol conversion than that of the AuPd/TiO₂-101. Meanwhile, all the prepared AuPd/TiO₂ catalysts were characterized by XRD, ICP-AES, XPS, BET, TEM, and HRTEM. The results revealed that the higher number of oxygen vacancies in TiO₂-sheets with the exposed {001} facets of higher surface energy could be responsible for the observed enhancement in the catalytic performance of benzyl alcohol oxidation. The present study displays that it is plausible to enhance the catalytic performance for the benzyl alcohol oxidation by tailoring the exposed facet of the TiO₂ as a catalyst support.

The high thermal stabilizing capability of noble metals (Pd and Au) supported by SBA-15 and the impact on CO oxidation

Precious metal nanoparticles (NPs) are attractive for use in the field of catalysis because of their precisely controlled sizes and shapes.

Synthesis of a Rationally Designed Multi-Component Photocatalyst Pt:SiO2:TiO2(P25) with Improved Activity for Dye Degradation by Atomic Layer Deposition

Photocatalysts for water purification typically lack efficiency for practical applications. Here we present a multi-component (Pt:SiO₂:TiO₂(P25)) material that was designed using knowledge of reaction mechanisms of mono-modified catalysts (SiO₂:TiO₂, and Pt:TiO₂) combined with the potential of atomic layer deposition (ALD). The deposition of ultrathin SiO₂ layers on TiO₂ nanoparticles, applying ALD in a fluidized bed reactor, demonstrated in earlier studies their beneficial effects for the photocatalytic degradation of organic pollutants due to more acidic surface Si–OH groups which benefit the generation of hydroxyl radicals. Furthermore, our investigation on the role of Pt on TiO₂(P25), as an improved photocatalyst, demonstrated that suppression of charge recombination by oxygen adsorbed on the Pt particles, reacting with the separated electrons to superoxide radicals, acts as an important factor for the catalytic improvement. Combining both materials into the resulting Pt:SiO₂:TiO₂(P25) nanopowder exceeded the dye degradation performance of both the individual SiO₂:TiO₂(P25) (1.5 fold) and Pt:TiO₂(P25) (4-fold) catalysts by 6-fold as compared to TiO₂(P25). This approach thus shows that by understanding the individual materials’ behavior and using ALD as an appropriate deposition technique enabling control on the nano-scale, new materials can be designed and developed, further improving the photocatalytic activity. Our research demonstrates that ALD is an attractive technology to synthesize multicomponent catalysts in a precise and scalable way.

A reduced graphene oxide-supported iridium nanocatalyst for selective transformation of alcohols into carbonyl compounds via a green process

A nanocatalyst constructed from reduced graphene oxide and iridium atoms (RGOIrNc) showed high selectivity (99%-100%) and reliability for the transformation of aromatic alcohols into carbonyl compounds via ultrasonication without using harmful chemicals and solvents. Experimental data including Fourier transform infrared spectroscopy, x-ray diffraction, spherical-aberration-corrected field emission transmission electron microscopy and Raman spectra confirmed the nanostructure of the RGOIrNc. Noticeably, the structural characteristics of this catalyst remained unchanged within 25 catalytic cycles and the activity and selectivity for the transformation of benzylic alcohols showed good stability. The average turnover frequency is greater than 9000 h^-1, the total turnover number is more than 150 000 after 25 catalytic cycles and the productivity of carbonyl compounds reaches 376 048 [Formula: see text], indicating that RGOIrNc catalyst has good durability and stability and high 'greenness'.

Graphene oxide-iridium nanocatalyst for the transformation of benzylic alcohols into carbonyl compounds

A catalyst constructed from graphene oxide and iridium chloride exhibited high activity and reliability for the selective transformation of benzylic alcohols into aromatic aldehydes or ketones. Instead of thermal reaction, the transformation was performed under ultrasonication, a green process with low byproduct, high atomic yield and high selectivity. Experimental data obtained from spherical-aberration corrected field emission TEM (ULTRA-HRTEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy and Raman spectra confirm the nanostructure of the title complex. Noticeably, the activity and selectivity for the transformation of benzylic alcohols remained unchanged within 25 catalytic cycles. The average turn over frequency is higher than 5000 h⁻¹, while the total turnover number (TON) is more than one hundred thousand, making it a high greenness and eco-friendly process for alcohol oxidation.

Graphene oxide–iridium nanostructure act as a robust catalyst exhibiting high activity and reliability for the selective transformation of benzylic alcohols into aromatic aldehydes or ketones.

Novel recyclable BiOBr/Fe3O4/RGO composites with remarkable visible-light photocatalytic activity

Magnetic BiOBr/Fe₃O₄/RGO composites with remarkable photocatalytic capability were prepared by a simple hydrothermal method to load 3D flower-like microspherical BiOBr onto the surface of Fe₃O₄/RGO.

Supported Gold Nanoparticles as Catalysts for the Oxidation of Alcohols and Alkanes

Supporting gold nanoparticles have shown to be extremely active for many industrially important reactions, including oxidations. Two representative examples are the oxidation of alcohols and alkanes, that are substrates of industrial interest, but whose oxidation is still challenging. This review deals with these reactions, giving an insight of the first studies performed by gold based catalysts in these reactions and the most recent developments in the field.

Three-dimensional N-doped graphene aerogel-supported Pd nanoparticles as efficient catalysts for solvent-free oxidation of benzyl alcohol

Herein, three-dimensional (3D) nitrogen-doped graphene with large surface areas and abundant porous structures was prepared by a hydrothermal synthesis method, which served as a novel support to enhance the catalytic properties of noble metal catalysts for the solvent-free selective oxidation of benzyl alcohol. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and Brunauer–Emmett–Teller (BET) method. The results clearly showed that the introduced N-containing group prevented the aggregation of graphene sheets and provided more structural defects to maximize the number of exposed active sites. The three-dimensional structure can provide a unique porous structure and large specific surface area. Moreover, the three-dimensional structure makes the recycling and reuse of the catalyst easier. The combination of these properties results in the reduction of the average particle size of metal palladium to 3.2 nm; this significantly increases the catalytic activity of the catalyst. The three-dimensional N-doped graphene aerogel-supported Pd nanoparticle (3D Pd/NRGO) composites exhibit excellent catalytic activity for the solvent-free selective oxidation of benzyl alcohol to benzaldehyde by molecular oxygen at 90 °C for 3 hours under atmospheric pressure, resulting in a 72.2% conversion of benzyl alcohol with 94.5% selectivity for benzaldehyde. In addition, the catalytic efficiency shows no obvious loss even after six repeated cycles. Thus, 3D Pd/NRGO can be used as an efficient, easily separable, recyclable, and stable catalyst for the solvent-free selective oxidation of benzyl alcohol under relatively mild conditions.

3D Pd/NRGO with large surface areas and abundant porous structures was prepared, which served as a novel support to enhance the catalytic properties of noble metal catalysts for the solvent-free selective oxidation of benzyl alcohol.

Gold-Palladium Nanoalloys Supported by Graphene Oxide and Lamellar TiO2 for Direct Synthesis of Hydrogen Peroxide

Hybrid catalysts composed of gold-palladium nanoalloys that are sandwiched between layers of graphene oxide (GO) and lamellar TiO₂ are synthesized via the deposition-reduction method. The resulting AuPd catalysts with different compositions of metal and support are fully characterized by a series of techniques, including X-ray diffraction, scanning transmission electron microscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma mass spectrometry. The catalysts are also optimized against Au, Pd, GO, and TiO₂ contents and employed in the direct synthesis of hydrogen peroxide (DSHP) from H₂ and O₂. The sandwich-like AuPd nanoalloy comprising 1 wt % nanoparticle of an equimolar mixture of Au and Pd with 6 wt % GO and 93 wt % TiO₂ supports shows a promising catalytic performance toward the DSHP reaction with H₂O₂ productivity and selectivity of 5.50 mol H₂O₂ g_metal^-1 h^-1 and 64%, respectively. The catalyst is found to be considerably more active than those reported in the literature. Furthermore, the H₂O₂ selectivity of the catalyst is found to improve considerably to 88% when the TiO₂ support is pretreated by HNO₃. It is found that the perimeter sites of the interface of AuPd alloy and TiO₂ are deemed as catalytically active sites for the DSHP reactions and the acidic property of TiO₂ can retard the other overreactions and the decomposition of yielded H₂O₂. Results of the present study may provide a design strategy for partially covered catalysts that are confined by 2D materials for selective reactions.

Thermally Driven Transport and Relaxation Switching Self-Powered Electromagnetic Energy Conversion

Electromagnetic energy radiation is becoming a "health-killer" of living bodies, especially around industrial transformer substation and electricity pylon. Harvesting, converting, and storing waste energy for recycling are considered the ideal ways to control electromagnetic radiation. However, heat-generation and temperature-rising with performance degradation remain big problems. Herein, graphene-silica xerogel is dissected hierarchically from functions to "genes," thermally driven relaxation and charge transport, experimentally and theoretically, demonstrating a competitive synergy on energy conversion. A generic approach of "material genes sequencing" is proposed, tactfully transforming the negative effects of heat energy to superiority for switching self-powered and self-circulated electromagnetic devices, beneficial for waste energy harvesting, conversion, and storage. Graphene networks with "well-sequencing genes" (w = Pc /Pp > 0.2) can serve as nanogenerators, thermally promoting electromagnetic wave absorption by 250%, with broadened bandwidth covering the whole investigated frequency. This finding of nonionic energy conversion opens up an unexpected horizon for converting, storing, and reusing waste electromagnetic energy, providing the most promising way for governing electromagnetic pollution with self-powered and self-circulated electromagnetic devices.

Preparation of carbon-based AuAg alloy nanoparticles by using the heterometallic [Au4Ag4] cluster for efficient oxidative coupling of anilines

We herein report the preparation of unique heteroatom-doped and carbon-based AuAg alloy nanoparticles (NPs) via the pyrolysis of a structurally defined octanuclear heterometallic Au(i)-Ag(i) cluster [Au4Ag4(Dppy)4(Tab)4(MeCN)4](PF6)8 (2, Dppy = diphenylphosphine-2-pyridine and Tab = 4-(trimethylammonio)benzenethiolate). This cluster-precursor approach exerts a fine control over the spatial arrangement, size and uniformity of the AuAg alloy NPs as well as the doped heteroatoms (P, N, F and S). The optimized material prepared at 450 °C efficiently catalyzes the oxidative coupling of anilines to yield azobenzenes under mild conditions.

Au–Pd NPs immobilised on nanostructured ceria and titania: impact of support morphology on the catalytic activity for selective oxidation

Au–Pd colloidal NPs immobilised on ceria nanorods are highly active catalysts for selective oxidation.

A Chiral-Nanoassemblies-Enabled Strategy for Simultaneously Profiling Surface Glycoprotein and MicroRNA in Living Cells

Assemblies of nanomaterials for biological applications in living cells have attracted much attention. Herein, graphene oxide (GO)-gold nanoparticle (Au NP) assemblies are driven by a splint DNA strand, which is designed with two regions at both ends that are complementary with the DNA sequence anchored on the surface of the GO and the Au NPs. In the presence of microRNA (miR)-21 and epithelial cell-adhesion molecule (EpCAM), the hybridization of miR-21 with a molecular probe leads to the separation of 6-fluorescein-phosphoramidite-modified Au NPs from GO, resulting in a decrease in the Raman signal, while EpCAM recognition reduces circular dichroism (CD) signals. The CD signals reverse from negative in original assemblies into positive when reacted with cells, which correlates with two enantiomer geometries. The EpCAM detection has a good linear range of 8.47-74.78 pg mL^-1 and a limit of detection (LOD) of 3.63 pg mL^-1 , whereas miR-21 detection displays an outstanding linear range of 0.07-13.68 amol ng^-1_RNA and LOD of 0.03 amol ng^-1_RNA . All the results are in good agreement with those of the Raman and confocal bioimaging. The strategy opens up an avenue to allow the highly accurate and reliable diagnosis (dual targets) of clinic diseases.

Tuning the Catalytic Activity and Selectivity of Pd Nanoparticles Using Ligand-Modified Supports and Surfaces

The organic moiety plays an essential role in the design of homogeneous catalysts, where the ligands are used to tune the catalytic activity, selectivity, and stability of the transition metal centers. The impact of ligands on the catalytic performance of metal nanoparticle catalysts is still less understood. Here, we prepared supported nanoparticle (NP) catalysts by the immobilization of preformed Pd NPs on the ligand-modified silica surfaces bearing amine, ethylenediamine, and diethylenetriamine groups. After excluding any size effect, we were able to study the influence of the ligands grafted on the support surface on the catalytic activity of the supported nanoparticles. Higher activity was observed for the Pd NPs supported on propylamine-functionalized support, whereas the presence of ethylenediamine and diethylenetriamine groups was detrimental to the activity. Upon the addition of excess of these amine ligands as surface modifiers, the hydrogenation of alkene to alkane was fully suppressed and, therefore, we were able to tune Pd selectivity. The selective hydrogenation of alkynes into alkenes, although a considerable challenge on the traditional palladium catalysts, was achieved here for a range of alkynes by combining Pd NPs and amine ligands.

Toward a Comprehensive Understanding of Enhanced Photocatalytic Activity of the Bimetallic PdAu/TiO2 Catalyst for Selective Oxidation of Methanol to Methyl Formate

Photocatalytic selective oxidation of alcohols over titania supported with bimetallic nanoparticles represents an energy efficient and sustainable route for the synthesis of esters. Specifically, the bimetallic PdAu/TiO₂ system was found to be highly active and selective toward photocatalytic production of methyl formate (MF) from gas-phase methanol. In the current paper, we applied the electronic structure density functional theory method to understand the mechanistic aspects and corroborate our recent experimental measurements for the photocatalytic selective oxidation of methanol to MF over the PdAu/TiO₂ catalyst. Our theoretical results revealed the preferential segregation of Pd atoms from initially mixed PdAu nanoclusters to the interface of PdAu/TiO₂ and subsequent formation of a unique structure, resembling a core@shell architecture in close proximity to the interface. The analysis of the calculated band gap diagram provides an explanation of the superior electron-hole separation capability of PdAu nanoparticles deposited onto the anatase surface and hence the remarkably enhanced photocatalytic activity, in comparison to their monometallic counterparts. We demonstrated that facile dissociation of molecular oxygen at the triple-point boundary site gives rise to in situ oxidation of Pd. The in situ formed PdO/TiO₂ is responsible for total oxidation of methanol to CO₂ (no MF formation) in the gas phase. Our investigation provides theoretical guidance for designing highly selective and active bimetallic nanoparticles-TiO₂ catalysts for the photocatalytic selective oxidation of methanol to MF.

Superior Stability of Au/SiO2 Compared to Au/TiO2 Catalysts for the Selective Hydrogenation of Butadiene

Supported gold nanoparticles are highly selective catalysts for a range of both liquid-phase and gas-phase hydrogenation reactions. However, little is known about their stability during gas-phase catalysis and the influence of the support thereon. We report on the activity, selectivity, and stability of 2-4 nm Au nanoparticulate catalysts, supported on either TiO₂ or SiO₂, for the hydrogenation of 0.3% butadiene in the presence of 30% propene. Direct comparison of the stability of the Au catalysts was possible as they were prepared via the same method but on different supports. At full conversion of butadiene, only 0.1% of the propene was converted for both supported catalysts, demonstrating their high selectivity. The TiO₂-supported catalysts showed a steady loss of activity, which was recovered by heating in air. We demonstrated that the deactivation was not caused by significant metal particle growth or strong metal-support interaction, but rather, it is related to the deposition of carbonaceous species under reaction conditions. In contrast, all the SiO₂-supported catalysts were highly stable, with very limited formation of carbonaceous deposits. It shows that SiO₂-supported catalysts, despite their 2-3 times lower initial activities, clearly outperform TiO₂-supported catalysts within a day of run time.