Task-Specific Design of Porous Polymer Heterogeneous Catalysts beyond Homogeneous Counterparts

Schiff-base Polymer Immobilized Ruthenium for Efficient Catalytic Cross-coupling of Secondary Alcohols with 2-amino- and γ-aminobenzyl Alcohols to Give Quinolines and Pyridines

A Schiff-base porous polymer has been impregnated with ruthenium trichloride for acceptor-free dehydrogenation coupling (ADC) of secondary alcohols with γ-amino- and 2-aminobenzyl alcohols to give pyridines and quinolines. This heterogenous catalyst exhibited high catalytic efficiency over repeated cycles with wide functional group tolerance.

Aprotic Lithium-Oxygen Batteries Based on Nonsolid Discharge Products

Aprotic lithium-oxygen (Li-O2) batteries are considered to be a promising alternative option to lithium-ion batteries for high gravimetric energy storage devices. However, the sluggish electrochemical kinetics, the passivation, and the structural damage to the cathode caused by the solid discharge products have greatly hindered the practical application of Li-O2 batteries. Herein, the nonsolid-state discharge products of the off-stoichiometric Li1-xO2 in the electrolyte solutions are achieved by iridium (Ir) single-atom-based porous organic polymers (termed as Ir/AP-POP) as a homogeneous, soluble electrocatalyst for Li-O2 batteries. In particular, the numerous atomic active sites act as the main nucleation sites of O2-related discharge reactions, which are favorable to interacting with O2-/LiO2 intermediates in the electrolyte solutions, owing to the highly similar lattice-matching effect between the in situ-formed Ir3Li and LiO2, achieving a nonsolid LiO2 as the final discharge product in the electrolyte solutions for Li-O2 batteries. Consequently, the Li-O2 battery with a soluble Ir/AP-POP electrocatalyst exhibits an ultrahigh discharge capacity of 12.8 mAh, an ultralow overpotential of 0.03 V, and a long cyclic life of 700 h with the carbon cloth cathode. The manipulation of nonsolid discharge products in aprotic Li-O2 batteries breaks the traditional growth mode of Li2O2, bringing Li-O2 batteries closer to being a viable technology.

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

Large scale production of green CH3 OH obtained from CO2 and green H2 is a highly wanted process due to the role of CH3 OH as H2 /energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal-organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO2 hydrogenation to CH3 OH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO2 hydrogenation to CH3 OH that frequently ranges from 250 to 300 °C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted.

Heterogenization of molecular catalysts within porous solids: the case of Ni-catalyzed ethylene oligomerization from zeolites to metal-organic frameworks

The last decade has seen a tremendous expansion of the field of heterogenized molecular catalysis, especially with the growing interest in metal-organic frameworks and related porous hybrid solids. With successful achievements in the transfer from molecular homogeneous catalysis to heterogenized processes come the necessary discussions on methodologies used and a critical assessment on the advantages of heterogenizing molecular catalysis. Here we use the example of nickel-catalyzed ethylene oligomerization, a reaction of both fundamental and applied interest, to review heterogenization methodologies of well-defined molecular catalysts within porous solids while addressing the biases in the comparison between original molecular systems and heterogenized counterparts.

Organic porous heterogeneous composite with antagonistic catalytic sites as a cascade catalyst for continuous flow reaction

One-pot cascade catalytic reactions easily allow the circumvention of pitfalls of traditional catalytic reactions, such as multi-step syntheses, longer duration, waste generation, and high operational cost. Despite advances in this area, the facile assimilation of chemically antagonistic bifunctional sites in close proximity inside a well-defined scaffold via a process of rational structural design still remains a challenge. Herein, we report the successful fusion of incompatible acid-base active sites in an ionic porous organic polymer (iPOP), 120-MI@OH, via a simple ion-exchange strategy. The fabricated polymer catalyst, 120-MI@OH, performed exceedingly well as a cascade acid-base catalyst in a deacetylation-Knoevenagel condensation reaction under mild and eco-friendly continuous flow conditions. In addition, the abundance of spatially isolated distinct acidic (imidazolium cations) and basic (hydroxide anions) catalytic sites give 120-MI@OH its excellent solid acid and base catalytic properties. To demonstrate the practical relevance of 120-MI@OH, stable millimeter-sized spherical composite polymer bead microstructures were synthesized and utilized in one-pot cascade catalysis under continuous flow, thus illustrating promising catalytic activity. Additionally, the heterogeneous polymer catalyst displayed good recyclability, scalability, as well as ease of fabrication. The superior catalytic activity of 120-MI@OH can be rationalized by its unique structure that reconciles close proximity of antagonistic catalytic sites that are sufficiently isolated in space.

Linkage-Affected Donor–Acceptor Covalent Organic Frameworks for Photocatalytic Hydrogen Production

The depletion of traditional fossil energy and the resulting environmental pollution forces people to explore new energy sources. Direct use of solar energy is now a viable solution for solving these problems. Covalent organic frameworks (COFs) are a porous crystalline material; their well-defined two-dimensional or three-dimensional frameworks can ensure the orderly arrangement of photoelectric active units, giving them potential photoelectric conversion applications. The tunable structural features endow COFs many advantages in photocatalytic hydrogen production under visible light. This review comprehensively summarizes the research progress on photoelectronic donor–acceptor (D-A) COFs with tunable structure for photocatalytic hydrogen evolution and will provide a feasible guiding strategy for applying this type of COFs in photocatalytic hydrogen production.

Tröger's Base Network Polymers of Intrinsic Microporosity (TB-PIMs) with Tunable Pore Size for Heterogeneous Catalysis

Heterogeneous catalysis plays a pivotal role in the preparation of value-added chemicals, and it works more efficiently when combined with porous materials and supports. Because of that, a detailed assessment of porosity and pore size is essential when evaluating the performance of new heterogeneous catalysts. Herein, we report the synthesis and characterization of a series of novel microporous Tröger’s base polymers and copolymers (TB-PIMs) with tunable pore size. The basicity of TB sites is exploited to catalyze the Knoevenagel condensation of benzaldehydes and malononitrile, and the dimension of the pores can be systematically adjusted with an appropriate selection of monomers and comonomers. The tunability of the pore size provides the enhanced accessibility of the catalytic sites for substrates, which leads to a great improvement in conversions, with the best results achieving completion in only 20 min. In addition, it enables the use of large benzaldehydes, which is prevented when using polymers with very small pores, typical of conventional PIMs. The catalytic reaction is more efficient than the corresponding homogeneous counterpart and is ultimately optimized with the addition of a small amount of a solvent, which facilitates the swelling of the pores and leads to a further improvement in the performance and to a better carbon economy. Molecular dynamic modeling of the copolymers’ structures is employed to describe the swellability of flexible chains, helping the understanding of the improved performance and demonstrating the great potential of these novel materials.

Functional Porous Ionic Polymers as Efficient Heterogeneous Catalysts for the Chemical Fixation of CO2 under Mild Conditions

The development of efficient and metal-free heterogeneous catalysts for the chemical fixation of CO₂ into value-added products is still a challenge. Herein, we reported two kinds of polar group (−COOH, −OH)-functionalized porous ionic polymers (PIPs) that were constructed from the corresponding phosphonium salt monomers (v-PBC and v-PBH) using a solvothermal radical polymerization method. The resulting PIPs (POP-PBC and POP-PBH) can be used as efficient bifunctional heterogeneous catalysts in the cycloaddition reaction of CO₂ with epoxides under relatively low temperature, ambient pressure, and metal-free conditions without any additives. It was found that the catalytic activities of the POP-PBC and POP-PBH were comparable with the homogeneous catalysts of Me-PBC and PBH and were higher than that of the POP-PPh₃-COOH that was synthesized through a post-modification method, indicating the importance of the high concentration catalytic active sites in the heterogeneous catalysts. Reaction under low CO₂ concentration conditions showed that the activity of the POP-PBC (with a conversion of 53.8% and a selectivity of 99.0%) was higher than that of the POP-PBH (with a conversion of 32.3% and a selectivity of 99.0%), verifying the promoting effect of the polar group (−COOH group) in the porous framework. The POP-PBC can also be recycled at least five times without a significant loss of catalytic activity, indicating the high stability and robustness of the PIPs-based heterogeneous catalysts.

Porous Organic Polymers: Promising Testbed for Heterogeneous Reactive Oxygen Species Mediated Photocatalysis and Nonredox CO2 Fixation

Catalysts play a pivotal role in achieving the global need for food and energy. In this context, porous organic polymers (POPs) with high surface area, robust architecture, tunable pore size, and chemical functionalities have emerged as promising testbeds for heterogeneous catalysis. Amorphous POPs having functionalized interconnected hierarchical porous structures activate a diverse range of substrates through covalent/non-covalent interactions or act as a host matrix to encapsulate catalytically active metal centers. On the other hand, conjugated POPs have been explored for photoinduced chemical transformations. In this personal account, we have delineated the evolution of various POPs and the specific role of pores and pore functionalities in heterogeneous catalysis. Subsequently, we retrospect our journey over the last ten years towards designing and fabricating amorphous POPs for heterogeneous catalysis, specifically photocatalytic reactive oxygen species (ROS)-mediated organic transformations and nonredox chemical fixation of CO₂ . We have also outlined some of the future avenues of POPs and POP-based hybrid materials for diverse catalytic applications.

Construction of a (NNN)Ru-Incorporated Porous Organic Polymer with High Catalytic Activity for β-Alkylation of Secondary Alcohols with Primary Alcohols

Solid supports functionalized with molecular metal catalysts combine many of the advantages of heterogeneous and homogeneous catalysis. A (NNN)Ru-incorporated porous organic polymer (POP-bp/bbpRuCl₃) exhibited high catalytic efficiency and broad functional group tolerance in the C–C cross-coupling of secondary and primary alcohols to give β-alkylated secondary alcohols. This catalyst demonstrated excellent durability during successive recycling without leaching of Ru which is ascribed to the strong binding of the pincer ligands to the metal ions.

Metal-assisted synthesis of salen-based porous organic polymer for highly efficient fixation of CO2 into cyclic carbonates

A series of metal–salen-based porous organic polymers was synthesized using a simple metal-assisted synthetic method, among which Co-salen-POP exhibited highly efficient performance in the fixation of CO2 into cyclic carbonates.

Construction of dual-functional nitrogen-enriched fluorescent porous organic polymers for detecting m-dinitrobenzene, picric acid and capturing iodine

Two novel nitrogen-enriched porous organic polymers (POPs), HBP and TBP, were constructed via nucleophilic substitution reactions with high nitrogen contents up to 24.91% and 32.92% for sensing to nitroaromatic compounds (NACs) and adsorbing iodine. They were all systematically characterized by solid-state ¹³C NMR, FT-IR, elemental analysis, solid-state UV-Vis, and other material analysis methods. The experimental data proved that both POPs possess high chemical and thermal stability, excellent fluorescence performance, and porous properties with Brunauer-Emmett-Teller (BET) specific surface areas of 32.88 and 68.00 m² g^-1. The two POPs have dual functions of fluorescence sensing and adsorption. On the one hand, due to their excellent conjugated properties and nitrogen-enriched structures, HBP and TBP exhibited incredibly high sensitivity to m-dinitrobenzene (m-DNB) and picric acid (PA) with K_SV values of 2.57 × 10⁵ and 4.93 × 10⁴ L mol^-1 and limits of detection of 1.17 × 10^-11 and 6.08 × 10^-11 mol L^-1, respectively. On the other hand, owing to the plenty of nitrogen affinity sites, they exhibited excellent volatile iodine adsorption with 2.23 and 2.66 g g^-1, respectively.

A spirobifluorene-based water-soluble imidazolium polymer for luminescence sensing

A water-soluble luminescent sensor based on a spirobifluorene-based imidazolium polymer is developed for the selective sensing of Fe³⁺ and Cr₂O₇²⁻.

Surface engineering of a Cu-based heterogeneous catalyst for efficient azide–alkyne click cycloaddition

Atomic-scale engineering of the copper active sites tunes the material performance in the regioselective synthesis of triazoles.

One-pot fructose conversion into 5-ethoxymethylfurfural using a sulfonated hydrophobic mesoporous organic polymer as a highly active and stable heterogeneous catalyst

We report a sulfonated hydrophobic mesoporous organic polymer (MOP-SO3H) as a highly efficient heterogeneous catalyst for one-pot 5-ethoxymethylfurfural (EMF) production from fructose in ethanol solvent.

New Porous Silicon-Containing Organic Polymers: Synthesis and Carbon Dioxide Uptake

The design and synthesis of new multifunctional organic porous polymers has attracted significant attention over the years due to their favorable properties, which make them suitable for carbon dioxide storage. In this study, 2-, 3-, and 4-hydroxybenzaldehyde reacted with phenyltrichlorosilane in the presence of a base, affording the corresponding organosilicons 1–3, which further reacted with benzidine in the presence of glacial acetic acid, yielding the organic polymers 4–6. The synthesized polymers exhibited microporous structures with a surface area of 8.174–18.012 m2 g−1, while their pore volume and total average pore diameter ranged from 0.015–0.035 cm3 g−1 and 1.947–1.952 nm, respectively. In addition, among the synthesized organic polymers, the one with the meta-arrangement structure 5 showed the highest carbon dioxide adsorption capacity at 323 K and 40 bar due to its relatively high surface area and pore volume.

Ionic Liquid-Modified Porous Organometallic Polymers as Efficient and Selective Photocatalysts for Visible-Light-Driven CO2 Reduction

In the photoreduction of CO₂ to CO, the competitive H₂ evolution is always inevitable due to the approximate reduction potentials of H⁺/H₂ and CO₂/CO, which results in poor selectivity for CO production. Herein, imidazolium-type ionic liquid- (IL-) modified rhenium bipyridine-based porous organometallic polymers (Re-POMP-IL) were designed as efficient and selective photocatalysts for visible-light CO₂ photoreduction to CO based on the affinity of IL with CO₂. Photoreduction studies demonstrated that CO₂ photoreduction promoted by Re-POMP-IL functioning as the catalyst exhibits excellent CO selectivity up to 95.5% and generate 40.1 mmol CO/g of Re-POMP-IL1.0 (obtained by providing equivalent [(5,5′-divinyl-2,2′-bipyridine)Re(CO)₃Cl] and 3-ethyl-1-vinyl-1H-imidazol-3-ium bromide) at 12 h, outperforming that attained with the corresponding Re-POMP analogue without IL, which highlights the crucial role of IL. Notably, CO₂ adsorption, light harvesting, and transfer of photogenerated charges as key steps for CO₂RR were studied by employing POMPs modified with different amounts of IL as photocatalysts, among which the CO₂ affinity as an important factor for POMPs catalyzed CO₂ reduction is revealed. Overall, this work provides a practical pathway to improve the CO₂ photoreduction efficiency and CO selectivity by employing IL as a regulator.

Rh-catalyzed highly regioselective hydroformylation to linear aldehydes by employing porous organic polymer as a ligand

In this work, we developed a new structural porous organic polymer containing biphosphoramidite unit, which can be used as a solid bidentate phosphorous ligand for rhodium-catalyzed solvent-free higher olefins hydroformylation. The resultant catalyst demonstrated unprecedently high regioselectivity to linear aldehydes and could be readily recovered for successive reuses with good stability in both catalytic activity and regioselectivity.

A porous organic polymer as a ligand was designed and prepared for Rh-catalyzed hydroformylation with outstanding activity and unprecedently high regioselectivity to linear aldehyde.

Porous Ru(bpy)32+-Linked Polymers for Recyclable Photocatalysis of Enantioselective Alkylation of Aldehydes

Two metal porous organic polymers (POPs) that contain the [Ru(bpy)₃]²⁺ cores are prepared via one-pot Suzuki-Miyaura coupling reactions. Both Ru-POPs are thermally stable at up to 340 °C in air and do not dissolve in all solvents tested. One of the POPs has been revealed to be highly effective and reusable as a heterogeneous photocatalyst for visible light-driven enantioselective alkylation of aldehydes. After 10 cycles, the catalyst still maintains the enantioselectivity, while the activity just decreases slightly.

Thiophene-embedded conjugated microporous polymers for photocatalysis

“Bottom-up” embedding of thiophene derivatives into CMPs for highly efficient heterogeneous photocatalysis is reported.

Physically mixed catalytic system of amino and sulfo-functional porous organic polymers as efficiently synergistic co-catalysts for one-pot cascade reactions

Acid/base bi-functional polymeric materials were prepared using physically mixed porous polymers P(DVB-VBS) with sulfonic acid and P(DVB-VBA) with amino groups for various cascade reactions.

Exploration of advanced porous organic polymers as a platform for biomimetic catalysis and molecular recognition

This Feature article summarizes our progress in the design of biomimetic POPs for catalysis and molecular recognition with enhanced performance.

Efficient synthesis of highly dispersed ultrafine Pd nanoparticles on a porous organic polymer for hydrogenation of CO2 to formate

Precise design of catalytic supports is an encouraging technique for simultaneously improving the activity and stability of the catalyst. However, development of efficient heterogeneous catalysts for transforming CO₂ into formic acid (FA) is still a big challenge. Herein, we report that Pd nanoparticles (NPs) based on a porous organic polymeric support containing amide and pyridine functional groups (AP-POP) can be an efficient catalyst for selective hydrogenation of CO₂ to form formate with high efficiency even under mild reaction conditions (6.0 MPa, 80 °C). Electron density of the active Pd species modulated via the interaction between pyridine nitrogen and Pd play important roles in dramatic enhancement of catalytic activity and was indicated by X-ray photoelectron spectroscopy (XPS) along with CO chemisorption. This work provides an interesting and effective strategy for precise support design to improve the catalytic performance of nanoparticles.

Precise design of catalytic supports is an encouraging technique for simultaneously improving the activity and stability of the catalyst.

Synthesis and properties of porous polymers synthesized by Michael addition reactions of multi-functional acrylate, diamine, and dithiol compounds

Porous polymers have been synthesized by Michael addition reactions of multi-functional acrylate and diamine or dithiol compounds. Aza-Michael addition reaction of multi-functional acrylate, trimethylolpropane propoxylate triacrylate (TPT) and hexamethylene diamine (HDA) in dimethyl sulfoxide (DMSO) successfully yielded the porous polymer. The porous structure was characterized by connected globules or co-continuous structure, and could be controlled by the reaction conditions. Mechanical properties of the porous polymers were investigated by compression test. The porous polymers with co-continuous structure showed higher Young's modulus than those with connected globules. The porous polymer absorbed some organic solvents, especially CHCl₃. The porous polymer as prepared in DMSO state showed coloring induced by Christiansen filter effect depending on the reaction time and observation temperature. The thio-Michael addition reaction of TPT and 1,6-hexanedithiol (HDT) in DMSO using different base catalysts also yielded the porous polymer. The porous structure could be controlled by the catalysts amount when the reaction was initiated by a photo-base generator as the base catalyst. The present reaction systems make it possible to synthesize the porous polymers with simple process without phase separator.

A Porous Polymer-Based Solid Acid Catalyst with Excellent Amphiphilicity: An Active and Environmentally Friendly Catalyst for the Hydration of Alkynes

Developing efficient solid acid catalysts for aqueous organic reactions is of great importance for the development of sustainable chemistry. In this work, a porous polymeric acid catalyst was synthesized via a solvothermal copolymerization and a successive ion-exchange method. Physicochemical characterizations suggested that the prepared polymers possessed large Brunauer-Emmett-Teller (BET) surface areas, a hierarchically porous structure, excellent surface amphiphilicity, and nice swelling properties. Notably, an activity test in phenylacetylene hydration indicated that the prepared solid acid exhibited high catalytic activity in water, which outperformed commercial amberlyst-15, sulfuric acid, and benzenesulfonic acid. Moreover, the prepared solid acid can be easily recovered and reused at least four times. Additionally, a variety of aromatic and aliphatic alkynes could be effectively transformed into corresponding ketones under optimal reaction conditions.

Rapid Polymerization of Aromatic Vinyl Monomers to Porous Organic Polymers via Acid Catalysis at Mild Condition

Porous organic polymers (POPs) have enormous applications in various fields and thus have received a lot of research attention in recent decades. Numerous synthetic methods have been developed, but mild synthesis conditions and fast polymerization rate are highly desired. Herein, high porous POPs with high surface areas from aromatic vinyl monomers by using acid catalysis method is reported. The polymerization is ultrafast and could be accomplished even in 5 min at room temperature. Furthermore, the surface area can be tuned by using various acid catalysts and controlling the reaction time. Due to the high surface area, these POPs show promising adsorption of carbon dioxide and hydrogen, respectively. Furthermore, the large π-system of the building block and high surface area of the POPs also make them show potential applications in photocatalytic hydrogen evolution as well as promising catalyst support for metal nanoparticles.

Porous Organic Polymer-Derived Nanopalladium Catalysts for Chemoselective Synthesis of Antitumor Benzofuro[2,3- b]pyrazine from 2-Bromophenol and Isonitriles

An efficient strategy for the synthesis of benzofuro[2,3- b]pyrazines was developed. These tricyclic scaffolds were formed through a multistep cascade sequence, which includes double insertion of isonitriles and chemoselective bicyclization. In this reaction, a nanopalladium was used as a recyclable catalyst. Product 3w exhibited excellent anticancer activity toward T-24 (IC₅₀ = 12.5 ± 0.9 μM) and HeLa (IC₅₀ = 14.7 ± 1.6 μM) cells. We also explored the action mechanism of 3w on T-24 cells.

Pickering Emulsion-Derived Liquid-Solid Hybrid Catalyst for Bridging Homogeneous and Heterogeneous Catalysis

We describe a novel method to prepare a liquid-solid hybrid catalyst via interfacial growth of a porous silica crust around Pickering emulsion droplets, which allowed us to overcome the current limitations of both homogeneous and heterogeneous catalysts. The inner micron-scaled liquid (for example, ionic liquids) pool of the resultant catalyst can host free homogeneous molecular catalysts or enzymes to create a true homogeneous catalysis environment. The porous silica crust of the hybrid catalyst has excellent stability, which makes it amenable to packing directly in fixed-bed reactors for continuous flow catalysis. As a proof of concept, the enzymatic kinetic resolution of racemic alcohols, Cr^III(salen) complex-catalyzed asymmetric ring opening of epoxides and Pd-catalyzed Tsuji-Trost allylic substitution reactions were used to verify the generality and versatility of our strategy for bridging homogeneous and heterogeneous catalysis. The hybrid catalyst-based continuous flow system exhibited a 1.6∼16-fold enhancement in activity relative to homogeneous counterparts even over 1500 h, and the afforded enantioselectivities were completely equal to those obtained in the homogeneous counterpart systems. Interestingly, the catalytic efficiency can be tuned through rational engineering of the porous crust and the dimensions of the liquid pool, resulting in features of an innovatively designed catalyst. This contribution provides a new method to design efficient catalysts that can bridge the conceptual and technical gaps between homogeneous and heterogeneous catalysis.

Opportunities of Covalent Organic Frameworks for Advanced Applications

Covalent organic frameworks (COFs) are an emerging class of functional nanostructures with intriguing properties, due to their unprecedented combination of high crystallinity, tunable pore size, large surface area, and unique molecular architecture. The range of properties characterized in COFs has rapidly expanded to include those of interest for numerous applications ranging from energy to environment. Here, a background overview is provided, consisting of a brief introduction of porous materials and the design feature of COFs. Then, recent advancements of COFs as a designer platform for a plethora of applications are emphasized together with discussions about the strategies and principles involved. Finally, challenges remaining for this type material for real applications are outlined.

Mesoporous polymeric catalysts with both sulfonic acid and basic amine groups for the one-pot deacetalization−Knoevenagel reaction

Acid–base bifunctional P(DVB–NH₂–n-SO₃H) catalysts with mesoporous structure have been prepared and characterized for a one-pot cascade reaction with good recycling properties.