Low-Overpotential High-Activity Mixed Manganese and Ruthenium Oxide Electrocatalysts for Oxygen Evolution Reaction in Alkaline Media

Promotion of Acid-Water Oxidation by Lattice Distortion and Orbital Hybridization Induced by Ionic Dopant in Pyrochlore Y2Ru2O7

For acid-water oxidation, pyrochloric ruthenates are thought to be extremely effective electrocatalysts. In this work, through partial B-site replacement with larger M2+ cations, the electronic states of Y2Ru2O7 with strong electron correlations are reasonably managed, by which the inherent performance is tremendously promoted. Based on this, the improved Y2Ru1.9Sr0.1O7 electrocatalyst exhibits an outstanding durability and presents a highly inherent mass activity of 1915.1 A gRu-1 (at 1.53 V vs RHE). The enhanced oxygen-evolving reaction (OER) activity by ionic dopant in YRO pyrochlore can be attributed to two aspects, i.e., the lattice distortion induced inhibition of the grain coarsening, which results in a large surface area for YRO-M and increases the OER active sites, and the weakening of electron correlation via broadening of the Ru 4d bandwidths due to the increase of the average radius of B-site ions, which gives rise to an enhancement of conductivity and a strengthened hybridization between Ru 4d and O 2p orbitals and improves the reaction kinetics. The synergistic effects of lattice distortion and orbital hybridization promote the enhanced OER activity. The results would provide fresh concepts for the design of improved electrocatalysts and underscore the significance of managing the intrinsic performance through the dual modification of microstructure morphology and electronic structure.

In Situ Construction of Zinc-Mediated Fe, N-Codoped Hollow Carbon Nanocages with Boosted Oxygen Reduction for Zn-Air Batteries

The rational design of bifunctional oxygen electrocatalysts with unique morphology and luxuriant porous structure is significant but challenging for accelerating the reaction kinetics of rechargeable Zn-air batteries (ZABs). Herein, zinc-mediated Fe, N-codoped carbon nanocages (Zn-FeNCNs) are synthesized by pyrolyzing the polymerized iron-doped polydopamine on the surface of the ZIF-8 crystal polyhedron. The formation of the chelate between polydopamine and Fe serves as the covering layer to prevent the porous carbon nanocages from collapsing and boosts enough exposure and utilization of metal-based active species during carbonization. Furthermore, both the theoretical calculation and experimental results show that the strong interaction between polyhedron and polydopamine facilitates the evolution of high-activity zinc-modulated FeNx sites and electron transportation and then stimulates the excellent bifunctional catalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). As expected, the Zn-air battery with Zn-FeNCNs as an air cathode displays a superior power density (256 mW cm-2) and a high specific capacity (813.3 mA h gZn-1), as well as long-term stability over 1000 h. Besides, when this catalyst is applied to the solid-state battery, the device exhibited outstanding mechanical stability and a high round-trip efficiency under different bending angles.

Preparation of Ru-doped TiO2 nanotube arrays through anodizing TiRu alloys for bifunctional HER/OER electrocatalysts

In this research, Ru-doped TiO2 nanotube arrays (Ru-TNTA) were prepared by anodizing TiRu alloys, and the effects of annealing temperature, Ru content and test temperature on their performances for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) were investigated. The results show that the unannealed Ru-TNTA (a-Ru-TNTA) exhibits superior activity for the HER, and the Ru-TNTA annealed at 450 °C (c-Ru-TNTA) shows excellent activity for the OER. The Ru content of TiRu impacts the electrochemically active surface area (ECSA) and the charge transfer resistance (Rct) significantly. When the Ru content of Ru-TNTA is 6%, its performance is optimal. Moreover, the electrocatalytic activity of Ru-TNTA improves with increasing test temperature, and the overpotentials of a-Ru-TNTA and c-Ru-TNTA at 80 °C are 19 mV and 227 mV (10 mA cm-2), respectively. Ru-TNTA exhibits excellent electrocatalytic performance for water splitting and good stability, which provides a new idea for the preparation of advanced bifunctional electrocatalysts for water splitting.

Probing Changes in the Local Structure of Active Bimetallic Mn/Ru Oxides during Oxygen Evolution

Identifying the active site of catalysts for the oxygen evolution reaction (OER) is critical for the design of electrode materials that will outperform the current, expensive state-of-the-art catalyst, RuO2. Previous work shows that mixed Mn/Ru oxides show comparable performances in the OER, while reducing reliance on this expensive and scarce Pt-group metal. Herein, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy (XAS) are performed on mixed Mn/Ru oxide materials for the OER to understand structural and chemical changes at both metal sites during oxygen evolution. The results show that the Mn-content affects both the oxidation state and local coordination environment of Ru sites. Operando XAS experiments suggest that the presence of MnOx might be essential to achieve high activity likely by facilitating changes in the O-coordination sphere of Ru centers.

Nano Si-Doped Ruthenium Oxide Particles from Caged Precursors for High-Performance Acidic Oxygen Evolution

RuO₂ is well known as the benchmark acidic oxygen evolution reaction (OER) catalyst, but its practical application has been impeded by its limited durability. Herein, it is presented that the stability of ruthenium oxide can be significantly improved by pretrapping RuCl₃ precursors within a cage compound possessing 72 aromatic rings, which leads to well carbon-coated RuO_x particles (Si-RuO_x @C) after calcination. The catalyst survives in 0.5 M H₂ SO₄ for an unprecedented period of 100 hours at 10 mA cm^-2 with minimal overpotential change during OER. In contrast, RuO_x prepared from similar non-tied compounds doesn't exhibit such catalytic activity, highlighting the importance of the preorganization of Ru precursors within the cage prior to calcination. In addition, the overpotential at 10 mA cm^-2 in acid solution is only 220 mV, much less than that of commercial RuO₂ . X-ray absorption fine structure (FT-EXAFS) reveals the Si doping through unusual Ru-Si bond, and density functional theory (DFT) calculation reveals the importance of the Ru-Si bond in enhancing both the activity and stability of the catalyst.

Ti/RuO2-IrO2 anodic electrochemical oxidation composting leachate biochemical effluent: Response surface optimization and failure mechanism

In this work, the electrolytic process conditions for the electrochemical oxidation (EO) of composting leachate biochemical effluent (CLBE) were optimized via the response surface methodology (RSM). Meanwhile, a comparative study had been done on the failure characteristics of Ti/RuO₂-IrO₂ anodes in a single electrolyte solution system (H₂SO₄ and NaCl) and real wastewater (CLBE) by accelerated life tests, respectively. The RSM optimization results showed that the COD, NH₃-N and TN removal rates were 50.53%, 100% and 95.61% at 30 min, respectively, with a desirability value of 0.993. In parallel, the electrochemical and material characterizations were carried out on the electrodes before and after failure, by which the failure mechanism of Ti/RuO₂-IrO₂ anodes was clarified. On the whole, the true failure in the H₂SO₄ solution was attributed to coating dissolution and Ti substrate oxidation. In contrast, the electrode exhibited "apparent failure" due to the "bubble effect" in both NaCl and CLBE solutions, and the "effective roughness" formed compensated for the loss of activity caused by the absence of the coating. Besides, additional dissolution of the Ti substrate occurred in the CLBE solution due to the current edge effect and the presence of organic matter. This paper takes the actual wastewater as the research object and reveals its electrode failure mechanism, which provides a theoretical basis and reference for the subsequent optimization of the actual electrode service life.

Sol-Gel-Derived Ordered Mesoporous High Entropy Spinel Ferrites and Assessment of Their Photoelectrochemical and Electrocatalytic Water Splitting Performance

The novel material class of high entropy oxides with their unique and unexpected physicochemical properties is a candidate for energy applications. Herein, it is reported for the first time about the physico- and (photo-) electrochemical properties of ordered mesoporous (CoNiCuZnMg)Fe₂ O₄ thin films synthesized by a soft-templating and dip-coating approach. The A-site high entropy ferrites (HEF) are composed of periodically ordered mesopores building a highly accessible inorganic nanoarchitecture with large specific surface areas. The mesoporous spinel HEF thin films are found to be phase-pure and crack-free on the meso- and macroscale. The formation of the spinel structure hosting six distinct cations is verified by X-ray-based characterization techniques. Photoelectron spectroscopy gives insight into the chemical state of the implemented transition metals supporting the structural characterization data. Applied as photoanode for photoelectrochemical water splitting, the HEFs are photostable over several hours but show only low photoconductivity owing to fast surface recombination, as evidenced by intensity-modulated photocurrent spectroscopy. When applied as oxygen evolution reaction electrocatalyst, the HEF thin films possess overpotentials of 420 mV at 10 mA cm^-2 in 1 m KOH. The results imply that the increase of the compositional disorder enhances the electronic transport properties, which are beneficial for both energy applications.

Effect of Precursors on the Electrochemical Properties of Mixed RuOx/MnOx Electrodes Prepared by Thermal Decomposition

Growing thin layers of mixed-metal oxides on titanium supports allows for the preparation of versatile electrodes that can be used in many applications. In this work, electrodes coated with thin films of ruthenium (RuOx) and manganese oxide (MnOx) were fabricated via thermal decomposition of a precursor solution deposited on a titanium substrate by spin coating. In particular, we combined different Ru and Mn precursors, either organic or inorganic, and investigated their influence on the morphology and electrochemical properties of the materials. The tested salts were: Ruthenium(III) acetylacetonate (Ru(acac)₃), Ruthenium(III) chloride (RuCl₃·xH₂O), Manganese(II) nitrate (Mn(NO₃)₂·4H₂O), and Manganese(III) acetylacetonate (Mn(acac)₃). After fabrication, the films were subjected to different characterization techniques, including scanning electron microscopy (SEM), polarization analysis, open-circuit potential (OCP) measurements, electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), cyclic voltammetry (CV), and galvanostatic charge-discharge (GCD) experiments. The results indicate that compared to the others, the combination of RuCl₃ and Mn(acac) produces fewer compact films, which are more susceptible to corrosion, but have outstanding capacitive properties. In particular, this sample exhibits a capacitance of 8.3 mF cm^-2 and a coulombic efficiency of higher than 90% in the entire range of investigated current densities.

Isovalent anion-induced electrochemical activity of doped Co3V2O8 for oxygen evolution reaction application

The activity of an OER electrocatalyst is a strong function of the reaction kinetics at the active sites, which can be influenced by catalytic engineering (e.g., heterostructure, doping, and the addition of cocatalysts). Herein, we report the improved reaction kinetics of cobalt oxide for the OER via the addition of high valence vanadium and thereafter doping with sulphur (S-Co₃V₂O₈). The addition of vanadium increases the oxygen vacancy while the doping of sulphur increases the electronic conductivity of the electrocatalyst. The synergic effect of the oxygen vacancy and electronic conductivity increases the activity of S-Co₃V₂O₈. Furthermore, S-Co₃V₂O₈ showed the least Tafel slope, which showed the activity enhancement towards the oxygen evolution reaction. Moreover, the underlying reaction mechanism is explored by electrochemical impedance spectroscopy, which reveals that the ratio of polarisation resistance to double-layer capacitance is minimum for S-Co₃V₂O₈, indicating the highest activity.

Highly Efficient Decarboxylation of L-Lysine to Cadaverine Catalyzed by RuO2 Encapsulated in FAU Zeolite

The development of an efficient catalyst especially with a high productivity for decarboxylation of L-lysine to cadaverine, is of both industrial and economic significance. Here, we reported the synthesis of RuO2 well-confined in the supercage of FAU zeolite (RuO2@FAU) through in situ hydrothermal strategies. A set of characterizations, such as XRD, Raman, TEM, XPS, NH3-TPD and N2 physical adsorption, confirmed the successful encapsulation of RuO2 clusters (~1.5 nm) inside the FAU zeolite. RuO2@FAU had the higher cadaverine productivity of 120.9 g/L/h/mmol cat., which was almost six times that of traditionally supported ruthenium oxide catalysts (21.2 g/L/h/mmol cat.). RuO2@FAU catalysts with different ammonia exchange degrees, as well as different Si/Al ratios were further evaluated. After optimization, the highest cadaverine productivity of 480.3 g/L/h/mmol cat. was obtained. Deep analysis of the electronic properties of RuO2@FAU indicated that the surface defect structures, such as oxygen vacancies, played a vital role in the adsorption or activation of L-lysine which finally led to a boosted performance. Furthermore, the mechanism of decarboxylation of L-lysine to cadaverine was proposed.

Mixed Oxide Electrodes Based on Ruthenium and Copper: Electrochemical Properties as a Function of the Composition and Method of Manufacture

The development of mixed oxide electrodes is being intensively investigated to reduce the high cost associated with the use of noble metals and to obtain versatile and long-lasting devices. To evaluate their use for charge storage or anodic oxidation, in this paper, thin-film electrodes coated with ruthenium (RuOx) and copper oxide (CuOx) are fabricated by thermal decomposition of organic solutions containing the precursors by drop-casting on titanium (Ti) foils. The coating consisted of four layers of metal oxide. To investigate the effect of copper (Cu) on electrochemical performances, different approaches are adopted by varying the ratios of precursors’ concentration and including a RuOx interlayer. A comparison with samples obtained by only RuOx has been also performed. The electrodes are characterized using scanning electron microscopy (SEM), cyclic (CV) and linear sweep (LSV) voltammetry, electrochemical impedance spectroscopy (EIS), and corrosion tests. The addition of Cu enhances the capacitive response of the materials and promotes electron transfer reversibility. The coatings obtained by the highest Ru:Cu ratio (95:5) exhibit a more uniform surface distribution and increased corrosion resistance. The interlayer is beneficial to further reduce the corrosion susceptibility and to promote the oxygen evolution but detrimental in the charge storage power. The results suggest the possibility to enhance the electrochemical performance of expensive RuOx through a combination with a low amount of cheaper and more abundant CuOx.

Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination

Sunlight-driven water splitting to produce hydrogen fuel has stimulated intensive scientific interest, as this technology has the potential to revolutionize fossil fuel-based energy systems in modern society. The oxygen evolution reaction (OER) determines the performance of overall water splitting owing to its sluggish kinetics with multielectron transfer processing. Polymeric photocatalysts have recently been developed for the OER, and substantial progress has been realized in this emerging research field. In this Review, the focus is on the photocatalytic technologies and materials of polymeric photocatalysts for the OER. Two practical systems, namely, particle suspension systems and film-based photoelectrochemical systems, form two main sections. The concept is reviewed in terms of thermodynamics and kinetics, and polymeric photocatalysts are discussed based on three key characteristics, namely, light absorption, charge separation and transfer, and surface oxidation reactions. A satisfactory OER performance by polymeric photocatalysts will eventually offer a platform to achieve overall water splitting and other advanced applications in a cost-effective, sustainable, and renewable manner using solar energy.

Electronic wastes: A near inexhaustible and an unimaginably wealthy resource for water splitting electrocatalysts

E-wastes comprise complex combinations of potentially toxic elements that cause detrimental effects of the environmental contamination; besides their posing threat, most of the products also contain valuable and recoverable materials (Li, Au, Ag, W, Se, Te, etc.), which make them distinct from other forms of industrial wastes. Most of these value-added elements which are primarily employed in electronic goods are disposed of by incineration and land-filling. This is a serious issue besides just environmental pollution, as IUPAC recognized that such ignorance of or poor attention to e-waste recycling has put several elements in the periodic table to the list of endangered elements. Recycling these wastes utilized for electrocatalytic water splitting to produce H₂. These recovered e-wastes materials are used as electrocatalysts for the water-splitting, additives to enhance reaction kinetics, and substrate electrodes as well. Recycling and recovery of value-added materials in the view of applying them to electrocatalytic water splitting with endangered elements' perspective have not been covered by any recent review so far. Hence, this review is dedicated to discussing the opportunities available with recycling e-wastes, types of value-added materials that can be recovered for water splitting, strategies exploited, and prospects are discussed in details.

Regulating Crystal Structure and Atomic Arrangement in Single-Component Metal Oxides through Electrochemical Conversion for Efficient Overall Water Splitting

Single-component transition-metal oxide (TMO: FeO_x, NiO_x, or CoO_x) nanosheets grown on nickel foam (NF) were electrochemically optimized with Li ion (Na ion)-induced conversion reaction for bifunctional electrocatalysis. The optimum FeO_x/NF-Li electrocatalyst exhibits low overpotentials of 239 mV for hydrogen evolution reaction and 276 mV for oxygen evolution reaction at a current density of 100 mA cm^-2. A two-electrode water splitting cell using FeO_x/NF-Li as both anode and cathode requires only 1.60 V to achieve a current density of 10 mA cm^-2. The impressive water splitting performance of the FeO_x/NF-Li electrode is revealed to be attributed to Li-induced electrochemical conversion, which alters the crystal structure, creating more active sites for electrocatalytic reactions, as well as introduces O vacancies increasing the electron density and the intrinsic conductivity. More importantly, the atomic arrangement is regulated from tetrahedral Fe(Td) to octahedral Fe(Oh) coordination, which acts as catalytically active sites with reduced Gibbs free energy for the rate-determining steps. This electrochemical conversion reaction can be extended to other TMOs (i.e., NiO_x/NF and CoO_x/NF) for promoted electrocatalytic water splitting performances. This study provides an in-depth understanding on the nature of atomic and electronic structure evolution to promote the electrocatalytic activity.

Efficient Multifunctional Catalytic and Sensing Properties of Synthesized Ruthenium Oxide Nanoparticles

Ruthenium oxide is one of the most active electrocatalyst for oxygen evolution (OER) and oxygen reduction reaction (ORR). Herein, we report simple wet chemical route to synthesize RuO2 nanoparticles at controlled temperature. The structural, morphological and surface area studies of the synthesized nanoparticles were conducted with X-ray diffraction, electron microscopy and BETsurface area studies. The bifunctional electrocatalytic performance of RuO2 nanoparticles was studied under different atmospheric conditions for OER and ORR, respectively, versus reversible hydrogen electrode (RHE) in alkaline medium. Low Tafel slopes of RuO2 nanoparticles were found to be ~47 and ~49 mV/dec for OER and ORR, respectively, in oxygen saturated 0.5 M KOH system. Moreover, the catalytic activity of RuO2 nanoparticles was examined against the Horseradish peroxidase enzyme (HRP) at high temperature, and the nanoparticles were applied as a sensor for the detection of H2O2 in the solution.

Ir-Sn-Sb-O Electrocatalyst for Oxygen Evolution Reaction: Physicochemical Characterization and Performance in Water Electrolysis Single Cell with Solid Polymer Electrolyte

Mixed oxide Ir-Sn-Sb-O electrocatalyst was synthesized using thermal decomposition from chloride precursors in ethanol. Our previous results showed that Ir-Sn-Sb-O possesses electrocatalytic activity for an oxygen evolution reaction (OER) in acidic media. In the present work, the physicochemical characterization and performance of Ir-Sn-Sb-O in an electrolysis cell are reported. IrO2 supported on antimony doped tin oxide (ATO) was also considered in this study as a reference catalyst. Scanning electron microscopy (SEM) images indicated that Ir-Sn-Sb-O has a mixed morphology with nanometric size. Energy dispersive X-ray spectroscopy (EDS) showed a heterogeneous atomic distribution. Transmission electron microscopy (TEM) analysis resulted in particle sizes of IrO2 and ATO between 3 to >10 nm, while the Ir-Sn-Sb-O catalyst presented non-uniform particle sizes from 3 to 50 nm. X-ray diffraction (XRD) measurements indicated that synthesized mixed oxide consists of IrO2, IrOx, doped SnO2 phases and metallic Ir. The Ir-Sn-Sb-O mixed composition was corroborated by temperature programmed reduction (TPR) measurements. The performance of Ir-Sn-Sb-O in a single cell electrolyser showed better results for hydrogen production than IrO2/ATO using a mechanical mixture. Ir-Sn-Sb-O demonstrated an onset potential for water electrolysis close to 1.45 V on Ir-Sn-Sb-O and a current density near to 260 mA mg−1 at 1.8 V. The results suggest that the mixed oxide Ir-Sn-Sb-O has favorable properties for further applications in water electrolysers.

Construction of Defect-Rich Ni-Fe-Doped K0.23 MnO2 Cubic Nanoflowers via Etching Prussian Blue Analogue for Efficient Overall Water Splitting

Designing elaborate nanostructures and engineering defects have been promising approaches to fabricate cost-efficient electrocatalysts toward overall water splitting. In this work, a controllable Prussian-blue-analogue-sacrificed strategy followed by an annealing process to harvest defect-rich Ni-Fe-doped K_0.23 MnO₂ cubic nanoflowers (Ni-Fe-K_0.23 MnO₂ CNFs-300) as highly active bifunctional catalysts for oxygen and hydrogen evolution reactions (OER and HER) is reported. Benefiting from many merits, including unique morphology, abundant defects, and doping effect, Ni-Fe-K_0.23 MnO₂ CNFs-300 shows the best electrocatalytic performances among currently reported Mn oxide-based electrocatalysts. This catalyst affords low overpotentials of 270 (320) mV at 10 (100) mA cm^-2 for OER with a small Tafel slope of 42.3 mV dec^-1 , while requiring overpotentials of 116 and 243 mV to attain 10 and 100 mA cm^-2 for HER respectively. Moreover, Ni-Fe-K_0.23 MnO₂ CNFs-300 applied to overall water splitting exhibits a low cell voltage of 1.62 V at 10 mA cm^-2 and excellent durability, even superior to the Pt/C||IrO₂ cell at large current density. Density functional theory calculations further confirm that doping Ni and Fe into the crystal lattice of δ-MnO₂ can not only reinforce the conductivity but also reduces the adsorption free-energy barriers on the active sites during OER and HER.

Structures of mixed manganese ruthenium oxides (Mn1-xRux)O2 crystallised under acidic hydrothermal conditions

A synthesis method for the preparation of mixed manganese-ruthenium oxides is presented along with a detailed characterisation of the solids produced. The use of 1 M aqueous sulfuric acid mediates the redox reaction between KRuO4, KMnO4 and Mn2+ to form ternary oxides. At reaction temperature of 100 °C the products are mixtures of α-MnO2 (hollandite-type) and β-MnO2 (rutile-type), with some evidence of Ru incorporation in each from their expanded unit cell volumes. At reaction temperature of 200 °C solid-solutions β-Mn1-xRuxO2 are formed and materials with x ≤ 0.6 have been studied. The amount of Ru included in the oxide is greater than expected from the ratio of metals used in the synthesis, as determined by elemental analysis, implying that some Mn remains unreacted in solution. Powder X-ray diffraction (XRD) shows that while the unit cell volume expands in a linear manner, following Vegard's law, the tetragonal lattice parameters, and the a/c ratio, do not follow the extrapolated trends: this anisotropic behaviour is consistent with the different local coordination of the metals in the end members. Powder XRD patterns show increased peak broadening with increasing ruthenium content, which is corroborated by electron microscopy that shows nanocrystalline material. X-ray absorption near-edge spectra show that the average oxidation state of Mn in the solid solutions is reduced below +4 while that of Ru is increased above +4, suggesting some redistribution of charge. Analysis of the extended X-ray absorption fine structure provides complementary local structural information, confirming the formation of a solid solution, while X-ray photoelectron spectroscopy shows that the surface oxidation states of both Ru and Mn are on average lower than +4, suggesting a disordered surface layer may be present in the materials.

The Determination of Electrochemical Active Surface Area and Specific Capacity Revisited for the System MnOx as an Oxygen Evolution Catalyst

In the last decades several different catalysts for the electrochemical water splitting reaction have been designed and tested. In so-called benchmark papers they are compared with respect to their efficiency and activity. In order to relate the different catalyst to each other the definition of well-defined procedures is required. Two different methods are mainly used: Either the normalization with respect to the geometric surface area or to the catalyst loading. Most often only one of these values is available for a sample and the other one cannot be estimated easily. One approach in electrocatalysis is to determine the Helmholtz double layer capacitance (DLC) and deduce the electrochemical active surface area (ECSA). The DLC can be obtained from two different methods, either using differential capacitance measurement (DCM) or impedance spectroscopy (EIS). The second value needed for the calculation of the ECSA is the specific capacitance, which is the capacitance for a perfectly flat surface of given catalyst material. Here, we present the determination of the different capacitance values using manganese oxide as the exemplary model for the oxygen evolution reaction (OER). We determine the capacitance by DCM and EIS to calculate the ECSA using literature values for the specific capacitance. The obtained values are comparable from the two methods, but are much larger than the surface areas obtained by atomic force microscopy. Therefore, we consider the possibility of using the measured AFM area together with the Helmholtz capacitance to determine the specific capacitances for this material class. The comparison of these results with literature values illustrates the actual limits of the ECSA method, which will be discussed in this paper.

Nature-inspired electrocatalysts and devices for energy conversion

A NICE approach for the design of nature-inspired electrocatalysts and electrochemical devices for energy conversion.

Isolation and Study of Ruthenium-Cobalt Oxo Cubanes Bearing a High-Valent, Terminal RuV-Oxo with Significant Oxyl Radical Character

High-valent Ru^V-oxo intermediates have long been proposed in catalytic oxidation chemistry, but investigations into their electronic and chemical properties have been limited due to their reactive nature and rarity. The incorporation of Ru into the [Co₃O₄] subcluster via the single-step assembly reaction of Co^II(OAc)₂(H₂O)₄ (OAc = acetate), perruthenate (RuO₄^-), and pyridine (py) yielded an unprecedented Ru(O)Co₃(μ₃-O)₄(OAc)₄(py)₃ cubane featuring an isolable, yet reactive, Ru^V-oxo moiety. EPR, ENDOR, and DFT studies reveal a valence-localized [Ru^V(S = 1/2)Co^III₃(S = 0)O₄] configuration and non-negligible covalency in the cubane core. Significant oxyl radical character in the Ru^V-oxo unit is experimentally demonstrated by radical coupling reactions between the oxo cubane and both 2,4,6-tri-tert-butylphenoxyl and trityl radicals. The oxo cubane oxidizes organic substrates and, notably, reacts with water to form an isolable μ-oxo bis-cubane complex [(py)₃(OAc)₄Co₃(μ₃-O)₄Ru]-O-[RuCo₃(μ₃-O)₄(OAc)₄(py)₃]. Redox activity of the Ru^V-oxo fragment is easily tuned by the electron-donating ability of the distal pyridyl ligand set at the Co sites demonstrating strong electronic communication throughout the entire cubane cluster. Natural bond orbital calculations reveal cooperative orbital interactions of the [Co₃O₄] unit in supporting the Ru^V-oxo moiety via a strong π-electron donation.

Carbon Derived from Soft Pyrolysis of a Covalent Organic Framework as a Support for Small-Sized RuO2 Showing Exceptionally Low Overpotential for Oxygen Evolution Reaction

Electrochemical water splitting is the most energy-efficient technique for producing hydrogen and oxygen, the two valuable gases. However, it is limited by the slow kinetics of the anodic oxygen evolution reaction (OER), which can be improved using catalysts. Covalent organic framework (COF)-derived porous carbon can serve as an excellent catalyst support. Here, we report high electrocatalytic activity of two composites, formed by supporting RuO2 on carbon derived from two COFs with closely related structures. These composites catalyze oxygen evolution from alkaline media with overpotentials as low as 210 and 217 mV at 10 mA/cm2, respectively. The Tafel slopes of these catalysts (65 and 67 mV/dec) indicate fast kinetics compared to commercial RuO2. The observed activity is the highest among all RuO2-based heterogeneous OER catalysts-a touted benchmark OER catalyst. The high catalytic activity arises from the extremely small-sized (∼3-4 nm) RuO2 nanoparticles homogeneously dispersed in a micro-mesoporous (BET = 517 m2/g) COF-derived carbon. The porous graphenic carbon favors mass transfer, while its N-rich framework anchors the catalytic nanoparticles, making it highly stable and recyclable. Crucially, the soft pyrolysis of the COF enables the formation of porous carbon and simultaneous growth of small RuO2 particles without aggregation.

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃ PMo₁₂ O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^-2 and a small Tafel slope (23.45 mV dec^-1 ). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.

Transition-metal single atoms in nitrogen-doped graphenes as efficient active centers for water splitting: a theoretical study

Highly active single-atom catalysts (SACs) have recently been intensively studied for their potential in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Due to the existence of many such SAC systems, a general understanding of the trend and designing principle is necessary to discover an optimal SAC system. In this work, by using density functional theory (DFT), we investigated a series of late single transition metals (TM = Fe, Co, Ni, Cu, and Pd) anchored on various N doped graphenes (xN-TM, x = 1-4) as electrocatalysts for both the HER and OER. Solvent effects were taken into account using an implicit continuum model. Our results reveal that the catalytic activity of SACs is determined by the local coordination number of N and TM in the catalysts. Among the considered catalysts, a low-coordinated Co site, i.e. a triple-coordinated Co, exhibits a high catalytic activity toward the HER with a calculated hydrogen adsorption free energy of -0.01 eV, whereas a high-coordinated Co center, i.e. a quadruple-coordinated Co is a promising candidate for the OER with a low computed overpotential of -0.39 V, which are comparable to those of noble metal catalysts, indicating superior HER and OER performance of N-Co co-doped graphenes. The results shed light on the potential applications of TM and N co-doped graphenes as efficient single-atom bifunctional catalysts for water splitting, thereby functioning as promising candidates for hydrogen/oxygen production.

A nanostructured nickel/carbon matrix as an efficient oxygen evolution reaction electrocatalyst for rechargeable zinc–air batteries

An oxygen evolution electrode (OEE) is essential to improve the rechargeablility of Zn–air batteries.

Monitoring compositional changes in Ni(OH)2 electrocatalysts employed in the oxygen evolution reaction

Relating morphology and compositional changes spatially across a catalyst is important for understanding the active site involved in a reaction which is studied here for the OER at Ni(OH)₂.

Spin state engineered ZnxCo3-xO4 as an efficient oxygen evolution electrocatalyst

Oxygen evolution is the key step in the oxidation of water in electrolyzers and photoelectrochemical cells for the production of hydrogen. Developing a non-precious metal oxide catalyst with good electrocatalytic activity for the oxygen evolution reaction (OER) is very challenging. In this work, nanostructured ZnxCo3-xO4 has been shown as an efficient catalyst with a low overpotential for the OER in 0.1 M KOH solution. Substitution of Co2+ in the spinel oxide Co3O4 with Zn2+ creates a higher number of high-spin Co3+, which is found to be directly correlated with the OER activity of ZnxCo3-xO4. Zn0.8Co2.2O4 (x = 0.8) with the optimum amount of Co2+/Co3+ and high-spin Co3+ content showed a very low overpotential of ∼250 mV, at 10 mA cm-2, with a turnover frequency of ∼3 × 10-3 s-1 for the OER. The high Faradaic efficiency along with the stability of Zn0.8Co2.2O4 and electrocatalytic activity comparable with that of precious metal oxides indicate that this composition is a promising catalyst for water oxidation.

Nanohybrid structured RuO2/Mn2O3/CNF as a catalyst for Na-O2 batteries

A 3D RuO₂/Mn₂O₃/carbon nanofiber (CNF) composite has been prepared in this study by a facile two step microwave synthesis, as a bi-functional electrocatalyst towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). RuO₂ nanoparticles with the mean size of 1.57 nm are uniformly distributed on Mn₂O₃ nano-rods grown on electrospun CNFs. The electrocatalytic activity of the composites are investigated towards ORR/OER under alkaline condition. The ternary RuO₂/Mn₂O₃/CNF composite showed superior ORR activity in terms of onset potential (0.95 V versus RHE) and Tafel slope (121 mV dec^-1) compared to its RuO₂/CNF and Mn₂O₃/CNF counterparts. In the case of OER, the RuO₂/Mn₂O₃/CNF exhibited 0.34 V over-potential value measured at 10 mA cm^-2 and 52 mV dec^-1 Tafel slope which are lower than those of the other synthesized samples and as compared to state of the art RuO₂ and IrO _x type materials. RuO₂/Mn₂O₃/CNF also exhibited higher specific capacity (9352 mAh [Formula: see text]) than CNF (1395 mAh [Formula: see text]), Mn₂O₃/CNF (3108 mAh [Formula: see text]) and RuO₂/CNF (4859 mAh g _carbon ^-1) as the cathode material in Na-O₂ battery, which indicates the validity of the results in non-aqueous medium. Taking the benefit of RuO₂ and Mn₂O₃ synergistic effect, the decomposition of inevitable side products at the end of charge occurs at 3.838 V versus Na/Na⁺ by using RuO₂/Mn₂O₃/CNF, which is 388 mV more cathodic compared with CNF.

Metal Organic Framework Derived Materials: Progress and Prospects for the Energy Conversion and Storage

Exploring new materials with high efficiency and durability is the major requirement in the field of sustainable energy conversion and storage systems. Numerous techniques have been developed in last three decades to enhance the efficiency of the catalyst systems, control over the composition, structure, surface area, pore size, and moreover morphology of the particles. In this respect, metal organic framework (MOF) derived catalysts are emerged as the finest materials with tunable properties and activities for the energy conversion and storage. Recently, several nano- or microstructures of metal oxides, chalcogenides, phosphides, nitrides, carbides, alloys, carbon materials, or their hybrids are explored for the electrochemical energy conversion like oxygen evolution, hydrogen evolution, oxygen reduction, or battery materials. Interest on the efficient energy storage system is also growing looking at the practical applications. Though, several reviews are available on the synthesis and application of MOF and MOF derived materials, their applications for the electrochemical energy conversion and storage is totally a new field of research and developed recently. This review focuses on the systematic design of the materials from MOF and control over their inherent properties to enhance the electrochemical performances.

Boosting photocatalytic overall water splitting by Co doping into Mn3O4 nanoparticles as oxygen evolution cocatalysts

The effect of cobalt doping into a manganese oxide (tetragonal spinel Mn₃O₄) nanoparticle cocatalyst up to Co/(Co + Mn) = 0.4 (mol/mol) on the activity of photocatalytic water oxidation was studied. Monodisperse ∼10 nm Co_yMn_1-yO (0 ≤y≤ 0.4) nanoparticles were uniformly loaded onto photocatalysts and converted to Co_xMn_3-xO₄ nanoparticles through calcination. 40 mol% cobalt-doped Mn₃O₄ nanoparticle-loaded Rh@Cr₂O₃/SrTiO₃ photocatalyst exhibited 1.8 times-higher overall water splitting activity than that with pure Mn₃O₄ nanoparticles. Investigation on the band structure and electrocatalytic water oxidation activity of Co_xMn_3-xO₄ nanoparticles revealed that the Co doping mainly contributes to the improvement of water oxidation kinetics on the surface of the cocatalyst nanoparticles.

Mimicking Natural Photosynthesis: Solar to Renewable H2 Fuel Synthesis by Z-Scheme Water Splitting Systems

Visible light-driven water splitting using cheap and robust photocatalysts is one of the most exciting ways to produce clean and renewable energy for future generations. Cutting edge research within the field focuses on so-called "Z-scheme" systems, which are inspired by the photosystem II-photosystem I (PSII/PSI) coupling from natural photosynthesis. A Z-scheme system comprises two photocatalysts and generates two sets of charge carriers, splitting water into its constituent parts, hydrogen and oxygen, at separate locations. This is not only more efficient than using a single photocatalyst, but practically it could also be safer. Researchers within the field are constantly aiming to bring systems toward industrial level efficiencies by maximizing light absorption of the materials, engineering more stable redox couples, and also searching for new hydrogen and oxygen evolution cocatalysts. This review provides an in-depth survey of relevant Z-schemes from past to present, with particular focus on mechanistic breakthroughs, and highlights current state of the art systems which are at the forefront of the field.