Amorphous CuPt Alloy Nanotubes Induced by Na2S2O3 as Efficient Catalysts for the Methanol Oxidation Reaction

Unraveling distinct effects between CuOx and PtCu alloy sites in Pt-Cu bimetallic catalysts for CO oxidation at different temperatures

In situ exploration of the dynamic structure evolution of catalysts plays a key role in revealing reaction mechanisms and designing efficient catalysts. In this work, PtCu/MgO catalysts, synthesized via the co-impregnation method, outperforms monometallic Pt/MgO and Cu/MgO. Utilizing quasi/in-situ characterization techniques, it is discovered that there is an obvious structural evolution over PtCu/MgO from PtxCuyOz oxide cluster to PtCu alloy with surface CuOx species under different redox and CO oxidation reaction conditions. The synergistic effect between PtCu alloy and CuOx species enables good CO oxidation activity through the regulation of CO adsorption and O2 dissociation. At low temperatures, CO oxidation is predominantly catalyzed by surface CuOx species via the Mars-van Krevelen mechanism, in which CuOx can provide abundant active oxygen species. As the reaction temperature increases, both surface CuOx species and PtCu alloy collaborate to activate gaseous oxygen, facilitating CO oxidation mainly through the Langmuir-Hinshelwood mechanism.

Recent advances in single-atom alloys: preparation methods and applications in heterogeneous catalysis

Single-atom alloys (SAAs) are a different type of alloy where a guest metal, usually a noble metal (e.g., Pt, Pd, and Ru), is atomically dispersed on a relatively more inert (e.g., Ag and Cu) host metal. As a type of atomic-scale catalyst, single-atom alloy catalysts have broad application prospects in the field of heterogeneous catalysis for hydrogenation, dehydrogenation, oxidation, and other reactions. Numerous experimental and characterization results and theoretical calculations have confirmed that the resultant electronic structure caused by charge transfer between the host metal and guest metal and the special geometric structure of the guest metal are responsible for the high selectivity and catalytic activity of SAA catalysts. In this review, the common methods for the preparation of single-atom alloys in recent years are introduced, including initial wet impregnation, physical vapor deposition, and laser ablation in liquid technique. Afterwards, the applications of single-atom alloy catalysts in selective hydrogenation, dehydrogenation, oxidation reactions, and hydrogenolysis reactions are emphatically reviewed. Finally, several challenges for the future development of SAA catalysts are proposed.

The synthesis and application of crystalline-amorphous hybrid materials

Crystalline-amorphous hybrid materials (CA-HMs) possess the merits of both pure crystalline and amorphous phases. Abundant dangling bonds, unsaturated coordination atoms, and isotropic structural features in the amorphous phase, as well as relatively high electronic conductivity and thermodynamic structural stability of the crystalline phase simultaneously take effect in CA-HMs. Furthermore, the atomic and bandgap mismatch at the CA-HM interface can introduce more defects as extra active sites, reservoirs for promoted catalytic and electrochemical performance, and induce built-in electric field for facile charge carrier transport. Motivated by these intriguing features, herein, we provide a comprehensive overview of CA-HMs on various aspects-from synthetic methods to multiple applications. Typical characteristics of CA-HMs are discussed at the beginning, followed by representative synthetic strategies of CA-HMs, including hydrothermal/solvothermal methods, deposition techniques, thermal adjustment, and templating methods. Diverse applications of CA-HMs, such as electrocatalysis, batteries, supercapacitors, mechanics, optoelectronics, and thermoelectrics along with underlying structure-property mechanisms are carefully elucidated. Finally, challenges and perspectives of CA-HMs are proposed with an aim to provide insights into the future development of CA-HMs.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Evaluating the electrocatalytic activity of flower-like Co-MOF/CNT nanocomposites for methanol oxidation in basic electrolytes

Efficient electrocatalysts, with high tolerance to methanol oxidation, good stability, and acceptable cost are the main requisites for promising direct methanol fuel cell (DMFC) electrode materials. This target can be achieved by the integration of different active materials with unique structures. In this work, a cobalt metal-organic framework (Co-MOF) flower structure was prepared by a hydrothermal method, and then a simple ultrasonication method was employed to anchor carbon nanotubes (CNTs) in between the MOF flower petals and fabricate a Co-MOF/CNT hybrid composite. Different ratios of CNTs were used in the composite preparations, namely 25, 50, and 75 wt% of the composite. The nanocomposites were entirely investigated using different characterization techniques, such as XRD, FTIR, SEM, TEM, and XPS. Comparative electrochemical measurements confirmed that due to the integration of highly conductive CNTs with the porous active fascinating structure of Co-MOF, Co-MOF/50% CNTs exhibited improved electrocatalytic activity with a current density of 35 mA cm-2 at a potential of 0.335 V and a scan rate of 50 mV s-1. The excellent electrochemical activity and stability could be due to the synergy between Co-MOF and the CNTs that conferred adequate active sites for methanol electro-oxidation and a lower equivalent series resistance, as revealed from the electrochemical impedance spectroscopy study. This study opens a new avenue to decrease the utilization of platinum and increase the methanol oxidation activity using low-cost catalysts.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Pt-functionalized Amorphous RuOx as Excellent Stability and High-activity Catalysts for Low Temperature MEMS Sensors

The unsaturated coordination and abundant active sites endow amorphous metals with tremendous potential in improving metal oxide semiconductors' gas-sensing properties. However, the amorphous materials maintain the metastable status and easily transfer into the lower-active crystals during the gas-sensing process at high working temperatures, significantly limiting their further applications. Here, a bimetal amorphous PtRu catalyst is developed by accurately regulating the introduction of Pt species into amorphous RuOx supports to realize the highly active and stable H2 S gas-sensing detection. It is found that incorporation of low-concentration Pt species can effectively maintain the amorphous state of initial RuOx and delay the crystallization temperature as high as 100 °C. Further, ex situ XPS and in situ Raman spectroscopy analysis confirm that active Pt species can facilitate H2 S adsorption by strong Pt-S coordination and dissociate the sulfur species to the surrounding support, which contribute to the chemisorption and sensitization of H2 S. Meanwhile, electron transport at the interface between Pt, RuOx and ZnO further activates the reaction process at the surface of the gas-sensitive material. The final PtRu-modified ZnO (PtRu/ZnO) sensor enables the detection of H2 S in the ultra-low concentration range of 15-2000 ppb with remarkable stability.

Understanding the Copper-Iridium Nanocrystals as Highly Effective Bifunctional pH-universal Electrocatalysts for Water Splitting

It is pivotal to develop an economical, effective, and stable catalyst to promote the oxygen/hydrogen evolution reaction (OER/HER) throughout pH electrolytes, as the demand for hydrogen energy will increase greatly with the future development. Herein, a series of Ir-Cu nanoparticle composite carbon (Ir_xCu_y/C) catalysts are successfully synthesized using ethylene glycol reduction. In addition, the structure, morphology and composition of the electrocatalysts were systematically characterized, and the OER/HER performance of the catalysts was also tested under different pH conditions. According to experimental findings, amorphous Ir₃Cu/C has superior competent performance to catalyze oxygen (O₂) production in alkaline and acidic environments. The comparatively low overpotentials required are 222 mV and 304 mV, respectively, while generating a current density of 10 mA cm^-2. The reduced amount of precious metal and the further improvement in activity and durability make Ir₃Cu/C an excellent noble metal-based electrocatalyst. Meanwhile, IrCu/C has significant electrocatalytic performance for the HER in acidic media.

Hollow-structured amorphous Cu(OH)x nanowires doped with Ru for wide pH electrocatalytic hydrogen production

Developing efficient and stable catalysts for electrocatalytic hydrogen evolution reaction (HER) with low overpotential is the key point to realizing large-scale hydrogen commercialization. Herein, Ru doped amorphous hollow copper hydroxide nanowires on copper foam (Ru-Cu(OH)_x/CF) is prepared by surface chemical oxidization and following solvothermal process. The hollow 3D nanowire structure can provide abundant accessibility active sites, promote electrolyte in filtration and facilitate gas diffusion in the process of the electrochemical reaction. Then, the as-synthesized Ru-Cu(OH)_x/CF electrocatalyst exhibits impressive electrocatalytic performance for HER with 45, 80 and 50 mV to drive 10 mA cm^-2 in 1.0 M KOH, 1.0 M phosphate-buffered saline (PBS) and 0.5 M H₂SO₄, respectively, with remarkable long-term stability. Moreover, sustainable energies can power the two-electrode setup with amounts of hydrogen generation. The strategy may be particularly beneficial to explore simple synthesis and high-performance catalysts for HER.

PtCuFe alloy nanochains: Synthesis and composition-performance relationship in methanol oxidation and hydrogen evolution reactions

The controllable synthesis of 1-dimensional (1D) multi-metal Pt-based alloys, with enhanced electro-chemical properties remains a challenge, despite the wide application of Pt-based catalysts in fuel cells and in the hydrogen evolution reaction (HER). Herein, we fabricate PtCuFe alloy nanochains (NCs) that have a tunable composition by flexibly adjusting the molar ratios of the metal precursors. It was found that Cu²⁺ is key in the formation of 1D NCs, as confirmed by transmission electron microscopy characterizations. In addition, the alloyed Fe can further increase the content of the metallic state of Cu in the PtCuFe NCs. The as-prepared PtCuFe NCs exhibited higher catalytic activity and stability than those of the Pt nanoparticles (NPs), PtFe NPs, and PtCu NCs, for the methanol oxidation reaction (MOR) and HER. Additionally, the composition-performance relationship of PtCu_xFe_y NCs toward the MOR and HER were investigated. The hybrid density functional theory calculation and analysis showed that the 1D PtCuFe NCs have a lower lowest unoccupied molecular orbital (LUMO) than those of the 2- and 3-dimensional PtCuFe, verifying that the 1D PtCuFe NCs exhibit the highest activity for the MOR. This work has established a new method for the controllable synthesis of multi-metal Pt-based NCs/alloy catalysts and their subsequent applications in other electro-catalytic reactions.

Strained Lattice Gold-Copper Alloy Nanoparticles for Efficient Carbon Dioxide Electroreduction

Electrocatalytic conversion of carbon dioxide (CO2) into specific renewable fuels is an attractive way to mitigate the greenhouse effect and solve the energy crisis. AunCu100-n/C alloy nanoparticles (AunCu100−n/C NPs) with tunable compositions, a highly active crystal plane and a strained lattice were synthesized by the thermal solvent co-reduction method. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) results show that AunCu100−n/C catalysts display a subtle lattice strain and dominant (111) crystal plane, which can be adjusted by the alloy composition. Electrochemical results show that AunCu100−n/C alloy catalysts for CO2 reduction display high catalytic activity; in particular, the Faradaic efficiency of Au75Cu25/C is up to 92.6% for CO at −0.7 V (vs. the reversible hydrogen electrode), which is related to lattice shrinkage and the active facet. This research provides a new strategy with which to design strong and active nanoalloy catalysts with lattice mismatch and main active surfaces for CO2 reduction reaction.

Self-Templating-Oriented Manipulation of Ultrafine Pt3 Cu Alloyed Nanoparticles into Asymmetric Porous Bowl-Shaped Configuration for High-Efficiency Methanol Electrooxidation

The precise and comprehensive manipulation of the component, size, and geometric nano-architecture of platinum-based electrocatalysts into porous and hollow structure can effectively impart the catalysts with substantially improved electrochemical performance, yet remain formidably challenging. Herein, a straightforward fabrication of porous platinum-copper alloyed nanobowls (abbreviated as Pt₃ Cu NBs hereafter) assembled by ultrafine nanoparticles (≈2.9 nm) via a one-pot hydrothermal approach with the assistance of a structure-directing agent of N,N'-methylenebisacrylamide (MBAA) is reported. The involvement of MBAA plays a decisive role in the formation of Pt-MBAA complex solid nanospheres, which serve as the self-sacrificial reactive template for the deposition/growth of Pt₃ Cu nanoparticles and the eventual formation of the asymmetric open-shelled nanobowls. Benefitting from the 3D sufficient accessibility of exterior/interior surfaces, high atom-utilization efficiency, and PtCu bimetallic alloy synergy, the self-supported Pt₃ Cu NBs demonstrate remarkably enhanced activity, better anti-poisoning capability, and reinforced robustness for the methanol oxidation reaction (MOR) as compared with the commercial Pt black benchmark, exhibiting great application promises in practical fuel cell systems. It is envisaged that the innovative self-templated synthetic strategy outlined here may provide a perspective to design a range of porous bowl-shaped high-performance nanocatalysts.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

Amorphous Palladium-Based Alloy Nanoparticles as Highly Active Electrocatalysts for Ethanol Oxidation

Amorphous Pd-P metal-metalloid alloy nanoparticles showed higher electrochemical ethanol oxidation reaction performance than the crystalline Pd nanopartilces. The high performance was attributed to the rich defective coordination unsaturated sites and...

Crystal Orientation in Pt-Based Alloys Induced by W(CO)6: Driving Oxygen Electroreduction Catalysis

Integrating crystal orientation as well as structural and compositional advantages into one catalyst might be a promising strategy for high-performance Pt-based catalysts for proton-exchange membrane fuel cells. Herein, by introducing W(CO)₆ as a structure-oriented template, Pt-based alloys with a well-defined crystal orientation along the (111) facet were obtained. The oxygen reduction reaction mass and specific activities of the crystal-facet-tuned alloys reach a new level. Moreover, the outstanding durability stems from the combination of their exposed crystal facets and incorporated W. The density functional theory calculation results reveal that the formation of the preferred (111) alloys can be attributed to the lower free energy of (111) facets and the weaker adsorption of CO released by W(CO)₆. This proposed synthesis strategy of using transition-metal carbonyl compounds as additives to synthesize alloys with strong crystal orientation may open a door to the design of various alloy catalysts with ultrahigh activity.

Hierarchically Fractal PtPdCu Sponges and their Directed Mass- and Electron-Transfer Effects

Fractal Pt-based materials with hierarchical structures and high self-similarity have attracted more and more attention due to their bioinspiring maximum optimization of energy utilization and mass transfer. However, their high-efficiency design of the mass- and electron-transfer still remains to be a great challenge. Herein, fractal PtPdCu hollow sponges (denoted as PtPdCu-HS) facilitating both directed mass- and electron-transfer are presented. Such directed transfer effects greatly promote electrocatalytic activity, regarded as 3.9 times the mass activity, 7.3 times the specific activity, higher poison tolerance, and higher stability than commercial Pt/C for the methanol oxidation reaction (MOR). A new "directed mass- and electron-transfer" concept, characteristics, and mechanism are proposed at the micro/nanoscale to clarify the structural design and functional enhancement of fractal electrocatalyst. This work displays new possibilities for designing novel nanomaterials with high activity and superior stability toward electrocatalysis or other practical applications.

γ-Ray-Assisted Synthesis of a Pt-Sn Bimetallic Composite Loaded on Graphene-Graphitic Carbon Nitride Hybrid: A Cocktail Electrocatalyst for the Methanol Oxidation Reaction

The composite of Pt with transition metals is viewed as the most promising anode material for direct methanol fuel cell (DMFC) applications. Besides the decrease in the Pt loading, these multimetallic structures help in circumventing CO poisoning issues associated with a Pt catalyst. Herein, we prepared and loaded Pt-Sn bimetallic nanoparticles on an electron-rich and stable substrate consisting of graphitic nitride (GCN) and graphene oxide (GO)/reduced graphene oxide (r-GO) hybrid composites. The γ-radiolysis method was employed for coreduction of metal salts to deposit the binary composite of metal nanoparticles over the substrates. These structures were tested as the anode material for the methanol oxidation reaction (MOR). Among various possible combinations, Pt-Sn-loaded rGO-GCN (Pt-Sn/rGO-GCN) demonstrated the current density of ca. 2.4 A/mg_Pt. To the best of our knowledge, this value is among the highest ones, reported for similar systems in the acidic pH. Furthermore, these composites demonstrated excellent stability in the repeated cycle test. The improved performance is associated to the plenty of -OH groups provided by the Sn counterpart and a large number of adsorption sites from the electron-reached GCN counterpart.

Ultimate Corrosion to Pt-Cu Electrocatalysts for Enhancing Methanol Oxidation Activity and Stability in Acidic Media

Alloying platinum (Pt) with transition metals (M), as an established class of electrocatalysts, reduces the use of Pt and improves the electrocatalytic performance. However, the stability of transition metals in nanostructured platinum alloys is a fundamental and practical problem in electrocatalysis, due to leaching of transition metals under acidic operating condition. Here, a corrosion method has been developed for a Pt-Cu electrocatalyst with high activity (6.6 times that of commercial Pt/C) and excellent stability for the methanol oxidation reaction (MOR) under acidic operating conditions. The mechanism of formation has been studied, and possible mesostructured re-formation and atomic re-organization have been proposed. This work offers an effective strategy for the facile synthesis of a highly acid-stable PtM alloying and opens a door to high-performance design for electrocatalysts.

Engineering One-Dimensional AuPd Nanospikes for Efficient Electrocatalytic Nitrogen Fixation

Designing one-dimensional (1D) bimetallic nanomaterials is of great significance for electrochemical nitrogen fixation. Inspired by this, 1D AuPd nanospikes (AuPd NSs) composed with internal Au nanowire and external Pd nanohumps were fabricated by a flexible low-temperature wet-chemical method. Benefiting from the excellent electron transport efficiency of the 1D material and the accessible surface area provided by the unique nanospike-like structure, AuPd NSs exhibit outstanding nitrogen reduction reaction performance with an NH₃ yield rate of 16.9 μg h^-1 mg^-1_cat. and a Faradaic efficiency of 15.9% at -0.3 V under 0.1 M Na₂SO₄. This work not only provides an effective electrocatalyst for nitrogen fixation technology, but also presents a flexible method for the controlled synthesis of spike-like nanomaterials.

Cu Nanoclusters/FeN4 Amorphous Composites with Dual Active Sites in N-Doped Graphene for High-Performance Zn-Air Batteries

Exploring inexpensive and earth-abundant transition metal-nitrogen-based carbon (MNC) catalysts to substitute the scarce and costly Pt-based electrocatalysts for the oxygen reduction reaction (ORR) is quite anticipated in metal-air batteries (MABs). Here, we demonstrate a facile vacuum-annealing method to synthesize Cu nanoclusters/FeN₄ amorphous composites embedded in N-doped graphene (Cu/Fe-NG). This approach avoids the long-term pyrolysis procedure and the use of an inert atmosphere in the conventional procedure for fabricating MNC catalysts. Interestingly, we discovered that the amorphous structure of Cu/FeN₄ composites can provide high-activity bimetallic M-N_x sites (M = Cu, Fe), because of which the Cu/FeN₄ composites exhibit boosted electrocatalytic activity with a positive half-wave potential of 0.88 V (vs RHE), long-term durability, and low hydrogen peroxide for the ORR. The origin of this enhancement was assigned to the concomitance of Fe-N₄ and Cu-N_x moieties in Cu/Fe-NG, favoring adsorption and activation of the O₂ molecule as suggested by X-ray absorption fine structure (XAFS) analyses and density functional theory (DFT) calculations. Moreover, examinations of Cu/Fe-NG in both liquid and quasi-solid-state Zn-air batteries (ZABs) can exhibit remarkable performances. This work may offer facile fabrication of enhanced performance MNC catalysts as well as a profound insight into the use of amorphous materials in the ORR and ZABs.

Anodic hydrazine electrooxidation boosted overall water electrolysis by bifunctional porous nickel phosphide nanotubes on nickel foam

Water electrolysis is an environmentally friendly and sustainable technique for ultra-pure hydrogen production, while expensive electrode materials and high driving voltage have seriously hindered its commercialization process. Here, Earth-abundant bifunctional porous Ni2P hollow nanotubes on nickel foam (Ni2P-HNTs/NF) electrocatalysts are synthesized through a facile self-template method and a phosphating process, which are perfectly combined with the hydrazine electrooxidation reaction (HzOR) boosted water electrolysis. Benefiting from the unique structural characteristic of open-framework and abundant step atoms, Ni2P-HNTs/NF achieves 10 mA cm-2 at 91 mV (vs. RHE) for the cathodic hydrogen evolution reaction and 18 mV (vs. RHE) for the anodic HzOR in a three electrode system, respectively. The corresponding two-electrode hydrazine electrolyzer produces 10 mA cm-2 with a total voltage of only 152 mV for ultra-pure hydrogen production, highlighting a cost-effective and energy-saving water electrolysis mode.

Hollow carbon nanoparticles derived from Co3O4/carbon black hybrid: solid-phase synthesis and applications in a Zn-air battery

Metal-free carbon materials are regarded as a promising catalyst for the oxygen reduction reaction (ORR), owing to their high activity in an alkaline environment. In this paper, using industrial carbon black-supported Co₃O₄ hybrid as a raw material, typical hollow carbon nanoparticles were synthesized by solid-phase annealing the hybrid at an elevated temperature, followed by HCl etching to remove the cobalt oxide. The specific surface area of the hollow carbon is significantly increased and the total nitrogen content of the carbon is 4.13 at%, providing massive active sites for ORR. In alkaline solution, compared with the commercial Pt/C, the nitrogen-doped hollow carbon nanoparticles display a superior ORR electrocatalytic activity with a half-wave potential of 0.88 V versus the reversible hydrogen electrode. Furthermore, the catalyst exhibits an excellent stability and high discharge power density in the Zn-air battery. This study provides a simple and feasible strategy of solid-phase synthesis for the production of high performance metal-free hollow carbon materials.

One-step fabrication of trimetallic alloy nanozyme catalyzer for luminol-H2O2 chemiluminescence and its application for miRNA-21 detection coupled with miRNA walking machine

PtCuCo trimetallic alloys (PtCuCo-TAs) are synthesized by one-step reduction. The chemiluminescence (CL) properties of PtCuCo-TAs are studied systemically. PtCuCo-TAs show good catalyzing for luminol-H₂O₂ system. A CL platform is developed for the detection of miRNA-21 using PtCuCo-TAs as nanozyme catalyzer. In the CL detection platform, H1 (Hairpin DNA1) is immobilized onto magnetic beads (MBs) firstly. In the presence of miRNA-21, H1 is opened. H2 (Hairpin DNA2) then hybridizes with H1. Meanwhile, a "cleat" in the end of miRNA-21 with a fewer bases complementary is formed to prevent miRNA-21 dissociating from H1. This miRNA-21 hybridizes to another H1. When cpDNA-PtCuCo-TAs which consisted with cDNA (Complementary strand of probe DNA) and pDNA-PtCuCo-TAs (PtCuCo-TAs labeled with probe DNA) are added, the ssDNA region of H1 reacts with the toehold domain of probe DNA and cDNA is released resulting pDNA-PtCuCo-TAs being captured. With this process repeatedly, a lot of pDNA-PtCuCo-TAs are captured onto MBs. After separation and washing, the precipitate and H₂O₂ are put into the 96-well and luminol solution is injected. The CL signal is produced by PtCuCo-TAs catalyzing luminol-H₂O₂ system. The amount of miRNA-21 is detected with CL signal. This CL platform performs with limit of detection 0.167 fM and has good selectivity over other RNA.

Ligand-Exchange-Induced Amorphization of Pd Nanomaterials for Highly Efficient Electrocatalytic Hydrogen Evolution Reaction

Various kinds of amorphous materials, such as transition metal dichalcogenides, metal oxides, and metal phosphates, have demonstrated superior electrocatalytic performance compared with their crystalline counterparts. Compared to other materials for electrocatalysis, noble metals exhibit intrinsically high activity and excellent durability. However, it is still very challenging to prepare amorphous noble-metal nanomaterials due to the strong interatomic metallic bonding. Herein, the discovery of a unique thiol molecule is reported, namely bismuthiol I, which can induce the transformation of Pd nanomaterials from face-centered-cubic (fcc) phase into amorphous phase without destroying their integrity. This ligand-induced amorphization is realized by post-synthetic ligand exchange under ambient conditions, and is applicable to fcc Pd nanomaterials with different capping ligands. Importantly, the obtained amorphous Pd nanoparticles exhibit remarkably enhanced activity and excellent stability toward electrocatalytic hydrogen evolution in acidic solution. This work provides a facile and effective method for preparing amorphous Pd nanomaterials, and demonstrates their promising electrocatalytic application.

Study of the carbon cycle of a hydrogen supply system over a supported Pt catalyst: methylcyclohexane–toluene–hydrogen cycle

Owing to the importance of the carbon cycle and the universality of carbon loss in sustainable hydrogen supply systems, Pt-based catalysts were designed carefully for a reversible methylcyclohexane–toluene–hydrogen (MTH) cycle.

Catalytic Combustion of Dimethyl Disulfide on Bimetallic Supported Catalysts Prepared by the Wet-Impregnation Method

In this paper, the catalytic combustion of DMDS (dimethyl disulfide, CH3SSCH3) over bimetallic supported catalysts were investigated. It was confirmed that Cu/γ-Al2O3-CeO2 showed best catalytic performance among the five single-metal catalysts. Furthermore, six different metals were separately added into Cu/γ-Al2O3-CeO2 to investigate the promoting effect. The experiments revealed Pt as the most effective promoter and the best catalytic performance was achieved as the adding amount of 0.3 wt%. The characterization results indicated that high activity and resistance to sulfur poisoning of Cu-Pt/γ-Al2O3-CeO2 could be attributed to the synergistic effect between Cu and Pt.

Self-template synthesis of defect-rich NiO nanotubes as efficient electrocatalysts for methanol oxidation reaction

Developing robust and inexpensive non-noble metal based anode electrocatalysts is highly desirable for alkaline direct methanol fuel cells (ADMFCs). Herein, we successfully develop a facile self-template synthetic strategy for gram-grade porous NiO nanotubes (NTs) by pyrolyzing a nanorod-like Ni-dimethylglyoxime complex. The pyrolysis temperature highly correlates with the morphology and crystallinity of NiO NTs. The optimal NiO NTs exhibit a large electrochemically active surface area, a fast catalytic kinetics, and a small charge transfer resistance, which induce an outstanding electrocatalytic activity for the methanol oxidation reaction (MOR). Compared with conventional NiO nanoparticles, NiO NTs achieve a 11.5-fold increase in mass activity at 1.5 V for the MOR due to nanotubal morphology and abundant non-vacancy defects on the NiO NT surface. Moreover, NiO NTs have a higher electrocatalytic activity for the intermediates of the MOR (such as formaldehyde and formate) than conventional NiO nanoparticles, which also contribute to MOR activity enhancement. Given the facile synthesis and enhanced electrocatalytic performance, NiO NTs may be promising anode electrocatalysts for ADMFCs.

Self-Templating Approaches to Hollow Nanostructures

This current research progress on the fabrication of hollow nanostructures by using self-templating methods is reviewed. After a brief introduction to the unique properties and applications of hollow nanostructures and the three general fabrication routes, the discussions are focused on the five main self-templating strategies, including galvanic replacement, the Kirkendall effect, Ostwald ripening, dissolution-regrowth, and the surface-protected hollowing process. Some newly developed synthetic routes are selected and discussed in detail. In conclusion, a summary and the perspectives on the directions that might lead the future development of this exciting field are presented.

Recent Advances on Controlled Synthesis and Engineering of Hollow Alloyed Nanotubes for Electrocatalysis

The past decade has witnessed great progress in the synthesis and electrocatalytic applications of 1D hollow alloy nanotubes with controllable compositions and fine structures. Hollow nanotubes have been explored as promising electrocatalysts in the fuel cell reactions due to their well-controlled surface structure, size, porosity, and compositions. In addition, owing to the self-supporting ability of 1D structure, hollow nanotubes are capable of avoiding catalyst aggregation and carbon corrosion during the catalytic process, which are two other issues for the widely investigated carbon-supported nanoparticle catalysts. It is currently a great challenge to achieve high activity and stability at a relatively low cost to realize commercialization of these catalysts. An overview of the structural and compositional properties of 1D hollow alloy nanotubes, which provide a large number of accessible active sites, void spaces for electrolytes/reactants impregnation, and structural stability for suppressing aggregation, is presented. The latest advances on several strategies such as hard template and self-templating methods for controllable synthesis of hollow alloyed nanotubes with controllable structures and compositions are then summarized. Benefiting from the advantages of the unique properties and facile synthesis approaches, the capability of 1D hollow nanotubes is then highlighted by discussing examples of their applications in fuel-cell-related electrocatalysis. Finally, the remaining challenges and potential solutions in the field are summarized to provide some useful clues for the future development of 1D hollow alloy nanotube materials.

In situ high-potential-driven surface restructuring of ternary AgPd-Ptdilute aerogels with record-high performance improvement for formate oxidation electrocatalysis

Engineering nanoparticle surfaces driven by various gas atmospheres has attracted intensive attention in the design of efficient electrocatalysts for sustainable energy applications. However, the development of a more facile and efficient in situ engineering strategy under electrochemical testing conditions to achieve surface-reconstruction-induced high performance is significantly lacking. Herein, for the first time, we report in situ high-potential-driven restructuring in ternary AgPdPt aerogels with dilute Pt (AgPd-Ptdilute) during the electrochemical cyclic voltammetry testing for the alkaline formate oxidation reaction (FOR), in which the upper potential limit is ingeniously extended to the Ag redox region. Impressively, the resulting AgPd-Ptdilute aerogel displayed remarkable structural and compositional reconstruction in an alkaline environment. Our comprehensive results revealed that the high-potential cycling induces unique Ag outward diffusion to form an enriched PdPt metallic surface atomically coupled with amorphous Ag2O, which provides more opportunities to expose abundant active sites and induce robust electronic structure modulation. Notably, the surface-restructured AgPd-Ptdilute aerogel achieved record-high activity for FOR when the upper potential limit was extended to 1.3 V, exhibiting an unprecedented 5-fold improvement in activity compared to that of the commercial Pd/C. Moreover, it also offered greatly enhanced electrochemical stability with negligible activity decay after 500 cycles. This work gives a good understanding of surface reconstruction during such a novel high-potential-driven cycling process and opens a new door to designing more efficient electrocatalysts for FOR and beyond.

Shaping well-defined noble-metal-based nanostructures for fabricating high-performance electrocatalysts: advances and perspectives

This review highlights recent advances in shaping protocols and structure-activity relationships of noble-metal-based catalysts with well-defined nanostructures in electrochemical reactions.

Localized surface plasmon enhanced electrocatalytic methanol oxidation of AgPt bimetallic nanoparticles with an ultra-thin shell

AgPt bimetallic hollow nanoparticles (AgPt-BHNPs) with an ultra-thin shell were synthesized.

A novel strategy for the synthesis of hollow Pt–Cu tetradecahedrons as an efficient electrocatalyst toward methanol oxidation

Pt–Cu TNs can be simply achieved within a few minutes by an H⁺-assisted disproportionation reaction using Cu₂O tetradecahedrons as the template. Due to its unique structural advantages, these Pt–Cu TNs exhibit extraordinary electrocatalytic performance toward MOR.

Atomic-Level Co3O4 Layer Stabilized by Metallic Cobalt Nanoparticles: A Highly Active and Stable Electrocatalyst for Oxygen Reduction

Developing atomic-level transition oxides may be one of the most promising ways for providing ultrahigh electrocatalytic performance for oxygen reduction reaction (ORR), compared with their bulk counterparts. In this article, we developed a set of atomically thick Co₃O₄ layers covered on Co nanoparticles through partial reduction of Co₃O₄ nanoparticles using melamine as a reductive additive at an elevated temperature. Compared with the original Co₃O₄ nanoparticles, the synthesized Co₃O₄ with a thickness of 1.1 nm exhibits remarkably enhanced ORR activity and durability, which are even higher than those obtained by a commercial Pt/C in an alkaline environment. The superior activity can be attributed to the unique physical and chemical structures of the atomic-level oxide featuring the narrowed band gap and decreased work function, caused by the escaped lattice oxygen and the enriched coordination-unsaturated Co²⁺ in this atomic layer. Besides, the outstanding durability of the catalyst can result from the chemically epitaxial deposition of the Co₃O₄ on the cobalt surface. Therefore, the proposed synthetic strategy may offer a smart way to develop other atomic-level transition metals with high electrocatalytic activity and stability for energy conversion and storage devices.

Pd/Cu-Oxide Nanoconjugate at Zeolite-Y Crystallite Crafting the Mesoporous Channels for Selective Oxidation of Benzyl-Alcohols

Solid-state grinding of palladium and copper salts allowed the growth of palladium/copper oxide interface at the zeolite-Y surface. The hybrid nanostructured material was used as reusable heterogeneous catalyst for selective oxidation of various benzyl alcohols. The large surface area provided by the zeolite-Y matrix highly influenced the catalytic activity, as well as the recyclability of the synthesized catalyst. Impregnation of PdO-CuO nanoparticles on zeolite crystallite leads to the generation of mesoporous channel that probably prevented the leaching of the metal-oxide nanoparticles and endorsed high mass transfer. Formation of mesoporous channel at the external surface of zeolite-Y was evident from transmission electron microscopy and surface area analysis. PdO-CuO nanoparticles were found to be within the range of 2-5 nm. The surface area of PdO-CuO-Y catalyst was found to be much lower than parent zeolite-Y. The decrease in surface area as well as the presence of hysteresis loop in the N₂-adsoprtion isotherm further suggested successful encapsulation of PdO-CuO nanoparticles via the mesoporous channel formation. The high positive shifting in binding energy in both Pd and Cu was attributed to the influence of zeolite-Y framework on lattice contraction of metal oxides via confinement effect. PdO-CuO-Y catalyst was found to oxidize benzyl alcohol with 99% selectivity. On subjecting to microwave irradiation the same oxidation reaction was found to occur at ambient condition giving same conversion and selectivity.