Templated Electrochemical Fabrication of Hollow Molybdenum Sulfide Microstructures and Nanostructures with Catalytic Properties for Hydrogen Production

Engineering Single-Layer Hollow Structure of Transition Metal Dichalcogenides with High 1T-Phase Purity for Hydrogen Evolution Reaction

Rational design and controllable synthesis of hollow structures based on transition metal dichalcogenides (TMDs) have gained tremendous attention in the field of clean energy. However, the general synthetic strategies to fabricate single-layer hollow structures of TMDs, especially with unconventional phases (e.g., 1T or 1T'), still pose significant challenges. Herein, a scalable method is reported for the synthesis of single-layer hollow spheres (SLHS) of TMDs with high 1T-phase purity by etching bismuth (Bi) cores from pre-synthesized Bi@TMDs core-shell heterostructures including SLHS-1T-MoS2 , SLHS-1T-MoSe2 , SLHS-1T-WS2 , and SLHS-1T-WSe2 . Additionally, the etched Bi ions can be adsorbed on the single-layer TMDs shells in the form of single atoms (SAs) via the Bi─S bond. Due to the benefits of the single-layer hollow structure, high conductivity of 1T phase, and synergistic effect of Bi SAs and TMDs supports, the fabricated SLHS-1T-MoS2 exhibits superior electrocatalytic performance for hydrogen production. This work provides a way to manufacture advanced functional materials based on the single-layer hollow structures of 1T-TMDs and to expand their applications.

Nature-inspired functional porous materials for low-concentration biomarker detection

Nanostructuration is a promising tool for enhancing the performance of sensors based on electrochemical transduction. Nanostructured materials allow for increasing the surface area of the electrode and improving the limit of detection (LOD). In this regard, inverse opals possess ideal features to be used as substrates for developing sensors, thanks to their homogeneous, interconnected pore structure and the possibility to functionalize their surface. However, overcoming the insulating nature of conventional silica inverse opals fabricated via sol-gel processes is a key challenge for their application as electrode materials. In this work, colloidal assembly, atomic layer deposition and selective surface functionalization are combined to design conductive inverse opals as an electrode material for novel glucose sensing platforms. An insulating inverse opal scaffold is coated with uniform layers of conducting aluminum zinc oxide and platinum, and subsequently functionalized with glucose oxidase embedded in a polypyrrole layer. The final device can sense glucose at concentrations in the nanomolar range and is not affected by the presence of common interferents gluconolactone and pyruvate. This method may also be applied to different conductive materials and enzymes to generate a new class of highly efficient biosensors.

Fabrication of inverse opal molybdenum sulfide and its use as a catalyst for H2 evolution

Amorphous molybdenum sulfide (MoSx) and crystalline molybdenum disulfide (MoS2) are attractive noble-metal-free electrocatalysts for the H2 evolution reaction from water. Their actual activities depend on the quantity of active sites which are exposed to the electrolyte, which in turn, is influenced by their specific electrochemical surface area. Herein we report on the fabrication of regular inverse opal MoSx and MoS2 films by employing polystyrene nanoparticles with diameters in the range of 30-90 nm as hard templates. The use of these catalysts for the H2 evolution reaction in an acidic electrolyte solution is also presented. Impacts of the regular porous structure, the film thickness as well as the chemical nature of the catalyst (MoS2versus MoSx) are discussed. It shows a catalytically-effective-thickness of ca. 300 nm where the electrolyte can fully penetrate the catalyst macropores, thus all the catalytic active sites can be exposed to the electrolyte to achieve the maximal catalytic operation.

In Situ Growth of Nano-MoS2 on Graphite Substrates as Catalysts for Hydrogen Evolution Reaction

In order to synthesize a high-efficiency catalytic electrode for hydrogen evolution reactions, nano-MoS₂ was deposited in situ on the surface of graphite substrates via a one-step hydrothermal method. The effects of the reactant concentration on the microstructure and the electrocatalytic characteristics of the nano-MoS₂ catalyst layers were investigated in detail. The study results showed that nano-MoS₂ sheets with a thickness of about 10 nm were successfully deposited on the surface of the graphite substrates. The reactant concentration had an important effect on uniform distribution of the catalyst layers. A higher or lower reactant concentration was disadvantageous for the electrochemical performance of the nano-MoS₂ catalyst layers. The prepared electrode had the best electrocatalytic activity when the thiourea concentration was 0.10 mol·L^-1. The minimum hydrogen evolution reaction overpotential was 196 mV (j = 10 mV·cm^-2) and the corresponding Tafel slope was calculated to be 54.1 mV·dec^-1. Moreover, the prepared electrode had an excellent cycling stability, and the microstructure and the electrocatalytic properties of the electrode had almost no change after 2000 cycles. The results of the present study are helpful for developing low-cost and efficient electrode material for hydrogen evolution reactions.

Gold-Promoted Electrodeposition of Metal Sulfides on Silicon Nanowire Photocathodes To Enhance Solar-Driven Hydrogen Evolution

Constructing composite structures is the key to breaking the dilemma of slow reaction kinetics and easy oxidation on the surface of lightly doped p-type silicon nanowire (SiNW) array photocathodes. Electrodeposition is a convenient and fast technique to prepare composite photocathodes. However, the low conductivity of SiNWs limits the application of the electrodeposition technique in constructing composite structures. Herein, SiNWs were loaded with Au nanoparticles by chemical deposition to decrease the interfacial charge transfer resistance and increase active sites for the electrodeposition. Subsequently, co-catalysts CoS, MoS₂, and Ni₃S₂ with excellent hydrogen evolution activity were successfully composited by electrodeposition on the surface of SiNWs/Au. The obtained core-shell structures exhibited excellent photoelectrochemical hydrogen evolution activity, which was contributed by the plasma property of Au and the abundant hydrogen evolution active sites of the co-catalysts. This work provided a simple and efficient solution for the preparation of lightly doped SiNW-based composite structures by electrodeposition.

Enhancing Hydrogen Evolution Reaction via Synergistic Interaction between the [Mo3S13]2- Cluster Co-Catalyst and WSe2 Photocathode

A thiomolybdate [Mo3S13]2- nanocluster is a promising catalyst for hydrogen evolution reaction (HER) due to the high number of active edge sites. In this work, thiomolybdate cluster films are prepared by spin-coating of a (NH4)2Mo3S13 solution both on FTO glass substrates as hydrogen evolving electrodes and on highly 00.1-textured WSe2 for photoelectrochemical water splitting. As an electrocatalyst, [Mo3S13]2- clusters demonstrate a low overpotential of 220 mV at 10 mA cm-2 in 0.5 M H2SO4 electrolyte (pH 0.3) and remain structurally stable during the electrochemical cycling as revealed by in situ Raman spectroscopy. Moreover, as a co-catalyst on WSe2, [Mo3S13]2- clusters enhance the photocurrent substantially by more than two orders of magnitude (from 0.02 to 2.8 mA cm-2 at 0 V vs RHE). The synergistic interactions between the photoelectrode and catalyst, i.e., surface passivation and band bending modification by the [Mo3S13]2- cluster film, promoted HER catalytic activity of [Mo3S13]2- clusters influenced by the WSe2 support, are revealed by intensity-modulated photocurrent spectroscopy and density functional theory calculations, respectively. The band alignment of the WSe2/[Mo3S13]2- heterojunction, which facilitates the electron injection, is determined by correlating UV-vis with photoelectron yield spectroscopy results.

Impact Electrochemistry of MoS2: Electrocatalysis and Hydrogen Generation at Low Overpotentials

MoS₂ materials have been extensively studied as hydrogen evolution reaction (HER) catalysts. In this study nanoparticulate MoS₂ is explored as a HER catalyst through impact voltammetry. The onset potential was found to be -0.10 V (vs RHE) at pH 2, which was confirmed to be due to HER by scale-up of the impact experiment to generate and collect a sufficient volume of the gas to enable its identification as hydrogen via gas chromatography. This is in contrast to electrodeposited MoS₂, which was found to be stable in pH 2 sulfuric acid solution with an onset potential of -0.29 V (vs RHE), in good agreement with literature. XPS was used to categorize the materials and confirm the chemical composition of both nanoparticles and electrodeposits, with XRD used to analyze the crystal structure of the nanoparticles. The early onset of HER was postulated from kinetic analysis to be due to the presence of nanoplatelets of about 1-3 trilayers participating in the impact reactions, and AFM imaging confirmed the presence of these platelets.

Recent Progress in Phase Regulation, Functionalization, and Biosensing Applications of Polyphase MoS2

The disulfide compounds of molybdenum (MoS₂ ) are layered van der Waals materials that exhibit a rich array of polymorphic structures. MoS₂ can be roughly divided into semiconductive phase and metallic phase according to the difference in electron filling state of the 4d orbital of Mo atom. The two phases show completely different properties, leading to their diverse applications in biosensors. But to some extent, they compensate for each other. This review first introduces the relationship between phase state and the chemical/physical structures and properties of MoS₂ . Furthermore, the synthetic methods are summarized and the preparation strategies for metastable phases are highlighted. In addition, examples of electronic and chemical property designs of MoS₂ by means of doping and surface modification are outlined. Finally, studies on biosensors based on MoS₂ in recent years are presented and classified, and the roles of MoS₂ with different phases are highlighted. This review offers references for the selection of materials to construct different types of biosensors based on MoS₂ , and provides inspiration for sensing performance enhancement.

Catalyst Formation and In Operando Monitoring of the Electrocatalytic Activity in Flow Reactors

Flow reactors are of increasing importance and have become crucial devices due to their wide application in chemical synthesis, electrochemical hydrogen evolution reaction (HER), or electrochemical waste water treatment. In many of these applications, catalyst materials such as transition-metal chalcogenides (TMCs) for the HER, provide the desired electrochemical reactivity for the HER. Generally, the flow electrolyzers' performance is evaluated as the overall output, but the decrease in activity of the electrolyzer is due to localized failure of the catalyst. Herein, we present a method for the spatially resolved (tens of micrometers) In Operando analysis of the catalytic activity under real operation conditions as well as the localized deposition of the catalyst in an operating model flow reactor. For these purposes, scanning electrochemical microscopy was applied for MoS_x catalyst deposition and for localized tracking of the TMC activity with a resolution of 25 μm. This approach offers detailed information about the catalytic performance and should find broad application for the characterization and optimization of flow reactor catalysis under real operational conditions.

Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application

The 3D-printing technology offers an innovative approach to develop energy storage devices because of its ability to create facile and low cost customized electrodes for modern electronics. Among the recently explored 2D nanomaterials beyond graphene, molybdenum sulfide (MoS_x) has been found as a promising material for electrochemical energy storage devices. In this study, a nanocarbon-based conductive filament was 3D-printed and then activated by solvent treatment, followed by electrodeposition of MoS_x on the printed nanocarbon electrode's surface. The conductive nanocarbon fibers allow a coaxial deposition of a thin MoS_x layer. The MoS_x layer contributes to pseudocapacitive charge storage mechanisms to obtain higher capacitances. In a three-electrode test system with 1 M H₂SO₄ as electrolyte, the MoS_x coated 3D-printed electrode (MoS_x@3D-PE) electrode shows a capacitance of 27 mF cm^-2 at the scan rate of 10 mV s^-1, and a capacitance of 11.6 mF cm^-2 at the current density of 0.13 mA cm^-2. Extending to solid-state supercapacitor (SS-SC), the cells were fabricated using the MoS_x@3D-PE with different designs and polyvinyl alcohol (PVA)/H₂SO₄ as gel electrolyte. An interdigital-shaped SS-SC provided a specific capacitance of 4.15 mF cm^-2 at a current density of 0.05 mA cm^-2. Moreover, it showed a stable cycle life where 10% capacitance loss was found after 10 000 cycles. Briefly, this study reports the integration of 3D-printing and room-temperature electrodeposition techniques allowing a simple way of fabricating customized free-standing 3D-electrodes for use in SC applications.

Signal-on cathodic photoelectrochemical aptasensing of insulin: Plasmonic Au activated amorphous MoSx photocathode coupled with target-induced sensitization effect

Cathodic photoelectrochemical (PEC) bioassay is more resistant to reductive interferents, and development of high-performance photocathode is imperatively required in precise monitoring target in complex matrices. In this work, a plasmonic Au activated amorphous MoS_x photocathode (a-MoS_x/Au) was fabricated by sequential electrodeposition. Coupled with a sensitization amplification strategy induced by target-aptamer recognition, an ultrasensitive and high-affinitive signal-on cathodic PEC aptasensor for insulin detection was developed. Under optimum conditions, the sensor exhibits a wide linear range (0.1 pg/mL~100 ng/mL) and an ultralow detection limit (28 fg/mL) even lower than most sensors reported so far. Plasmonic Au activation and target-induced sensitization effect are responsible for high-performance PEC aptasensing of insulin at a-MoS_x photocathode.

Iron Oxyhydroxide Hierarchical Micro/Nanostructured Film as Catalyst for Electrochemical Oxygen Evolution Reaction

A key requirement in developing oxygen evolution reaction (OER) electrocatalysts is increasing their surface area. Herein, we report the design of a hierarchical micro/nanostructured catalyst. Based on polystyrene colloidal template electrodeposition, an ordered microcup array surrounded by nanoflakes was fabricated. The effect of the deposition time on the formation of the catalyst and the corresponding OER performance of the catalyst were investigated using scanning electron microscopy, in situ X-ray absorption fine structure (XAFS) spectroscopy, and electrochemical analysis. The in situ XAFS measurements indicate that the structure of the hierarchical structured catalyst is similar to that of γ-FeOOH. The electrochemical analysis indicates that the hierarchical catalyst has a large surface area and a low charge transfer resistance, which lead to its excellent catalytic performance for the OER. Our study provides new insights in designing high-performance OER catalysts. Moreover, the synthesized hierarchical micro/nanostructured catalyst could be used as a platform for further studies on low-cost iron-based electrocatalysts.

Near infrared-light responsive WS2 microengines with high-performance electro- and photo-catalytic activities

Tungsten disulfide (WS2)-based micromotors with enhanced electrochemical and photo-catalytic activities are synthesized using a greatly simplified electrochemical deposition protocol at room temperature involving exclusively tungstic acid and sulfate as metal and sulfur sources without further building chemistry. The WS2-based micromotors exhibit dual electrochemical and photo-catalytic behavior in the inner and outer layers, respectively, due to the combination of the unique properties of the sp2 hybridized WS2 outer layer with highly reactive WS2-induced inner catalytic layers, accounting for this material's exclusive enhanced performances. A rough inner Pt-Ni layer allows tailoring the micromotor propulsion, with a speed increase of up to 1.6 times after external control of the micromotor with a magnetic field due to enhanced fuel accessibility. Such a coupling of the attractive capabilities of WS2 with enhanced micromotor movement holds considerable promise to address the growing energy crisis and environmental pollution concerns.

New Simultaneous Exfoliation and Doping Process for Generating MX2 Nanosheets for Electrocatalytic Hydrogen Evolution Reaction

Doping nonmetal atoms into layered transition metal dichalcogenide MX₂ structures has emerged as a promising strategy for enhancing their catalytic activities for the hydrogen evolution reaction. In this study, we developed a new and efficient one-step approach that involves simultaneous plasma-induced doping and exfoliating of MX₂ bulk into nanosheets-such as MoSe₂, WSe₂, MoS₂, and WS₂ nanosheets-within a short time and at a low temperature (ca. 80 °C). Specifically, by utilizing active plasma that is generated with an asymmetric electrical field during the electrochemical reaction at the surface of the submerged cathode tip, we are able to achieve doping of nitrogen atoms, from the electrolytes, into the semiconducting 2H-MX₂ structures during their exfoliation process from the bulk states, forming N-doped MX₂. We selected N-doped MoS₂ nanosheets for demonstrating their catalytic hydrogen evolution potential. We modulated the electronic and transport properties of the MoS₂ structure with the synergy of nitrogen doping and exfoliating for enhancing their catalytic activity. We found that the nitrogen concentration of 5.2 atom % at N-doped MoS₂ nanosheets have an excellent catalytic hydrogen evolution reaction, where a low overpotential of 164 mV at a current density of 10 mA cm^-2 and a small Tafel slope of 71 dec mV^-1-much lower than those of exfoliated MoS₂ nanosheets (207 mV, 82 dec mV^-1) and bulk MoS₂ (602 mV, 198 dec mV^-1)-as well as an extraordinary long-term stability of >25 h in 0.5 M H₂SO₄ can be achieved.

An electrochemical anodization strategy towards high-activity porous MoS2 electrodes for the hydrogen evolution reaction

Molybdenum disulfide (MoS2) is a promising non-precious metal electrocatalyst for the hydrogen evolution reaction (HER). Herein, we have described an anodization route for the fabrication of porous MoS2 electrodes. The active porous MoS2 layer was directly formed on the surface of a Mo metal sheet when it was subjected to anodization in a sulfide-containing electrolyte. The Mo sheet served as both a supporter for MoS2 electrocatalysts and a conductive substrate for electron transport. After optimizing the anodization parameters, the anodized MoS2 electrode showed a high electrocatalytic activity with an onset potential of -0.18 V (vs. RHE) for the HER, a Tafel slope of ∼101 mV per decade and an overpotential of 0.23 V at a current density of 10 mA cm-2 for the HER. These results indicate that our facile anodization strategy is an efficient route towards a high-activity MoS2 electrode.

Tunable Pt-MoS x Hybrid Catalysts for Hydrogen Evolution

Platinum (Pt)-based materials are inevitably among the best-performing electrocatalysts for hydrogen evolution reaction (HER). MoS₂ was suggested to be a potent HER catalyst to replace Pt in this reaction by theoretical modeling; however, in practice, this dream remains elusive. Here we show a facile one-pot bottom-up synthesis of Pt-MoS _x composites using electrochemical reduction in an electrolytic bath of Pt precursor and ammonium tetrathiomolybdate under ambient conditions. By modifying the millimolar concentration of Pt precursors, composites of different surface elemental composition are fabricated; specifically, Pt_1.8MoS₂, Pt_0.1MoS_2.5, Pt_0.2MoS_0.6, and Pt_0.3MoS_0.8. All electrodeposited Pt-MoS _x hybrids showcase low overpotentials and small Tafel slopes that outperform MoS₂ as an electrocatalyst. Tantamount to electrodeposited Pt, the rate-limiting process in the HER mechanism is determined to be the Heyrovsky desorption across Pt-MoS _x hybrids and starkly swings from the rate-determining Volmer adsorption step in MoS₂. The Pt-MoS _x composites are equipped with catalytic performance that closely mirrors that of electrodeposited Pt, in particular the HER kinetics for Pt_1.8MoS₂ and Pt_0.1MoS_2.5. This work advocates electrosynthesis as a cost-effective method for catalyst design and fabrication of competent composite materials for water splitting applications.

An Electrosynthesized 3D Porous Molybdenum Sulfide/Graphene Film with Enhanced Electrochemical Performance for Lithium Storage

Molybdenum sulfide/graphene composites are promising anode materials for lithium-ion batteries (LIBs). In this work, MoS_x /graphene composite film with an ideal 3D porous structure is developed via a facile and straightforward electrochemical route. The MoS_x nanoparticles are uniformly anchored on the graphene nanosheets that are randomly arranged, resulting in MoS_x /graphene composites with well-developed porous structure. Benefiting from such structure and the synergistic effect from two components, this material shows a high specific capacity over 1200 mA h g^-1 , an excellent rate performance, and superior cycling stability. The dominating pseudocapacitive behavior in Li storage contributes to the outstanding rate capacity. Importantly, this kind of novel material can be easily produced as 3D microelectrodes for microscaled LIBs that are highly demanded for autonomous microelectronic systems.

Inverse Opal-like Porous MoSex Films for Hydrogen Evolution Catalysis: Overpotential-Pore Size Dependence

Transition metal dichalcogenides (TMDs) are prized as electrocatalysts for hydrogen evolution reaction (HER). Common TMD syntheses entail conditions of high temperatures and reagents that are detrimental to the environment. The electrochemical synthesis of TMDs is advocated as a viable alternative to the conventional synthetic procedures in terms of simplicity, ecological sustainability, and versatility of deposition on various surfaces at room temperature. In this work, we demonstrate the successful fabrication of electrocatalytic inverse opal porous MoSe_x films, where 2 ≤ x ≤ 3, via solid template-assisted electrodeposition from the simultaneous electroreduction of molybdic acid and selenium dioxide as the respective metal and chalcogen precursors in an aqueous electrolyte. The electrosynthesized porous MoSe_x films contain pores with diameters of 0.1, 0.3, 0.6, or 1.0 μm, depending on the size of the polystyrene bead template used. The investigation reveals that porous MoSe_x films with a pore size of 0.1 μm, which prevailed over the other pore sizes, are endowed with the lowest HER overpotential of 0.57 V at -30 mA cm^-2 and a Tafel slope of 118 mV dec^-1, alluding to the adsorption step as rate limiting. Across all pore sizes, the Volmer adsorption step limits the HER mechanism. Nevertheless, the pore size dictates the catalytic activity of the porous MoSe_x films apropos of HER overpotential such that the HER performance of smaller pore sizes of 0.1 and 0.3 μm surpasses those with wider pore sizes of 0.6 and 1.0 μm. The observed trends in their HER behavior may be rationalized by the tunable surface wettability as pore sizes vary. These fundamental findings offer a glimpse into the efficacy of electrodeposited porous TMDs as electrocatalysts and exemplify the feasibility of the electrosynthesis method in altering the morphological structure of the TMDs.

Towards thermally stable high performance lithium-ion batteries: the combination of a phosphonium cation ionic liquid and a 3D porous molybdenum disulfide/graphene electrode

A lithium battery with excellent performance and thermal stability is realized by using a nanostructured electrode and an ionic liquid.

Composition-Graded MoWSx Hybrids with Tailored Catalytic Activity by Bipolar Electrochemistry

Among transition metal dichalcogenide (TMD)-based composites, TMD/graphene-related material and bichalcogen TMD composites have been widely studied for application toward energy production via the hydrogen evolution reaction (HER). However, scarcely any literature explored the possibility of bimetallic TMD hybrids as HER electrocatalysts. The use of harmful chemicals and harsh preparation conditions in conventional syntheses also detracts from the objective of sustainable energy production. Herein, we present the conservational alternative synthesis of MoWS_x via one-step bipolar electrochemical deposition. Through bipolar electrochemistry, the simultaneous fabrication of composition-graded MoWS_x hybrids, i.e., sulfur-deficient Mo_xW_(1-x)S₂ and Mo_xW_(1-x)S₃ (MoWS_x/BPE_cathodic and MoWS_x/BPE_anodic, respectively) under cathodic and anodic overpotentials, was achieved. The best-performing MoWS_x/BPE_cathodic and MoWS_x/BPE_anodic materials exhibited Tafel slopes of 45.7 and 50.5 mV dec^-1, together with corresponding HER overpotentials of 315 and 278 mV at -10 mA cm^-2. The remarkable HER activities of the composite materials were attributed to their small particle sizes, as well as the near-unity value of their surface Mo/W ratios, which resulted in increased exposed HER-active sites and differing active sites for the concurrent adsorption of protons and desorption of hydrogen gas. The excellent electrocatalytic performances achieved via the novel methodology adopted here encourage the empowerment of electrochemical deposition as the foremost fabrication approach toward functional electrocatalysts for sustainable energy generation.

Electrodeposition of Amorphous Molybdenum Chalcogenides from Ionic Liquids and Their Activity for the Hydrogen Evolution Reaction

This work reports on the general electrodeposition mechanism of tetrachalcogenmetallates from 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. Both tetrathio- and tetraselenomolybdate underwent anodic electrodeposition and cathodic corrosion reactions as determined by UV-vis spectroelectrochemistry. Electrodeposition was carried out by cycling the potential between the anodic and cathodic regimes. This resulted in a film of densely packed nanoparticles of amorphous MoS_x or MoSe_x as determined by SEM, Raman, and XPS. The films were shown to have high activity for the hydrogen evolution reaction. The onset potential (J = 1 mA/cm²) of the MoS_x film was E = -0.208 V vs RHE, and that of MoSe_x was E = -0.230 V vs RHE. The Tafel slope of MoS_x was 42 mV/decade, and that of MoSe_x was 59 mV/decade.

Few-Layered Mo(1-x)WxS2 Hollow Nanospheres on Ni3S2 Nanorod Heterostructure as Robust Electrocatalysts for Overall Water Splitting

Owing to unique optical, electronic, and catalytic properties, MoS₂ have received increasing interest in electrochemical water splitting. Herein, few-layered Mo_(1-x)W_xS₂ hollow nanospheres-modified Ni₃S₂ heterostructures are prepared through a facile hydrothermal method to further enhance the electrocatalytic performance of MoS₂. The doping of W element optimizes the electronic structure of MoS₂@Ni₃S₂ thus improving the conductivity and charge-transfer ability of MoS₂@Ni₃S₂. In addition, benefitting from the few-layered hollow structure of Mo_(1-x)W_xS₂, the strong electronic interactions between Mo_(1-x)W_xS₂ and Ni₃S₂ and the hierarchical structure of one-dimensional nanorods and three-dimensional Ni foam, massive active sites and fast ion and charge transportation are obtained. As a result, the optimized Mo_(1-x)W_xS₂@Ni₃S₂ heterostructure (Mo-W-S-2@Ni₃S₂) achieves an extremely low overpotential of 98 mV for hydrogen evolution reaction and 285 mV for oxygen evolution reaction at 10 mA cm^-2 in alkaline electrolyte. Particularly, using Mo-W-S-2@Ni₃S₂ heterostructure as a bifunctional electrocatalyst, a cell voltage of 1.62 V is required to deliver a 10 mA cm^-2 water splitting current density. In addition, the electrode can be maintained at 10 mA cm^-2 for at least 50 h, indicating the excellent stability of Mo-W-S-2@Ni₃S₂ heterostructure. Therefore, this development demonstrates an effective and feasible strategy to prepare highly efficient bifunctional electrocatalysts for overall water splitting.