Cu Deposited on CeOx-Modified TiO2(110): Synergistic Effects at the Metal–Oxide Interface and the Mechanism of the WGS Reaction

Spin-polarized p-block antimony/bismuth single-atom catalysts on defect-free rutile TiO2(110) substrate for highly efficient CO oxidation

Developing high-loading spin-polarized p-block-element-based single-atom catalysts (p-SACs) upon defect-free substrates for various chemical reactions wherein spin selection matters is generally considered a formidable challenge because of the difficulty of creating high densities of underpinning stable defects and the delocalized electronic features of p-block elements. Here our first-principles calculations establish that the defect-free rutile TiO2(110) wide-bandgap semiconducting anchoring support can stabilize and localize the wavefunctions of p-block metal elements (Sb and Bi) via strong ionic bonding, forming spin-polarized p-SACs. Cooperated by the underlying d-block Ti atoms via a delicate spin donation-back-donation mechanism, the p-block single-atom reactive center Sb(Bi) exhibits excellent catalysis for spin-triplet O2 activation and CO oxidation in alignment with Wigner's spin selection rule, with a low rate-limiting reaction barrier of ∼0.6 eV. This work is crucial in establishing high-loading reactive centers of high-performance p-SACs for various important physical processes and chemical reactions, especially wherein the spin degree of freedom matters, i.e., spin catalysis.

Cu-Based Materials for Enhanced C2+ Product Selectivity in Photo-/Electro-Catalytic CO2 Reduction: Challenges and Prospects

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO2, Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C2+ compounds through C-C coupling process. Herein, the basic principles of photocatalytic CO2 reduction reactions (PCO2RR) and electrocatalytic CO2 reduction reaction (ECO2RR) and the pathways for the generation C2+ products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO2RR and ECO2RR is emphasized. Through a review of recent studies on PCO2RR and ECO2RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C2+ products. Finally, the opportunities and challenges associated with Cu-based materials in the CO2 catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO2 reduction processes in the future.

Theoretical Calculations on Metal Catalysts Toward Water-Gas Shift Reaction: a Review

Water-gas shift (WGS) reaction offers a dominating path to hydrogen generation from fossil fuel, in which heterogeneous metal catalysts play a crucial part in this course. This review highlights and summarizes recent developments on theoretical calculations of metal catalysts developed to date, including surface structure (e. g., monometallic and polymetallic systems) and interface structure (e. g., supported catalysts and metal oxide composites), with special emphasis on the characteristics of crystal-face effect, alloying strategy, and metal-support interaction. A systematic summarization on reaction mechanism was performed, including redox mechanism, associative mechanism as well as hybrid mechanism; the development on chemical kinetics (e. g., molecular dynamics, kinetic Monte Carlo and microkinetic simulation) was then introduced. At the end, challenges associated with theoretical calculations on metal catalysts toward WGS reaction are discussed and some perspectives on the future advance of this field are provided.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Engineering Catalytic Interfaces in Cuδ+/CeO2-TiO2 Photocatalysts for Synergistically Boosting CO2 Reduction to Ethylene

Photocatalytic CO₂ conversion into a high-value-added C₂ product is a highly challenging task because of insufficient electron deliverability and sluggish C-C coupling kinetics. Engineering catalytic interfaces in photocatalysts provides a promising approach to manipulate photoinduced charge carriers and create multiple catalytic sites for boosting the generation of C₂ product from CO₂ reduction. Herein, a Cu^δ+/CeO₂-TiO₂ photocatalyst that contains atomically dispersed Cu^δ+ sites anchored on the CeO₂-TiO₂ heterostructures consisting of highly dispersed CeO₂ nanoparticles on porous TiO₂ is designedly constructed by the pyrolytic transformation of a Cu²⁺-Ce³⁺/MIL-125-NH₂ precursor. In the designed photocatalyst, TiO₂ acts as a light-harvesting material for generating electron-hole pairs that are efficiently separated by CeO₂-TiO₂ interfaces, and the Cu-Ce dual active sites synergistically facilitate the generation and dimerization of *CO intermediates, thus lowering the energy barrier of C-C coupling. As a consequence, the Cu^δ+/CeO₂-TiO₂ photocatalyst exhibits a production rate of 4.51 μmol^-1·g_cat^-1·h^-1 and 73.9% selectivity in terms of electron utilization for CO₂ to C₂H₄ conversion under simulated sunlight, with H₂O as hydrogen source and hole scavenger. The photocatalytic mechanism is revealed by operando spectroscopic methods as well as theoretical calculations. This study displays the rational construction of heterogeneous photocatalysts for boosting CO₂ conversion and emphasizes the synergistic effect of multiple active sites in enhancing the selectivity of C₂ product.

Modification strategies of heterogeneous catalysts for water-gas shift reactions

Featured by high energy density, hydrogen has been deemed as a clean and renewable energy source compared with conventional fossil fuels. Water-gas shift reaction (WGSR) exhibits great potential in the...

Metal–support interaction induced ZnO overlayer in Cu@ZnO/Al2O3 catalysts toward low-temperature water–gas shift reaction

The water–gas shift reaction (WGSR) plays a pivotal role in many important industrial processes as well as in the elimination of residual CO in feed gas for fuel cells. The development of a high-efficiency low-temperature WGSR (LT-WGSR) catalyst has attracted considerable attention. Herein, we report a ZnO-modified Cu-based nanocatalyst (denoted as Cu@ZnO/Al₂O₃) obtained via an in situ topological transformation from a Cu₂Zn₁Al-layered double hydroxide (Cu₂Zn₁Al-LDH) precursor at different reduction temperatures. The optimal Cu@ZnO/Al₂O₃-300R catalyst with appropriately abundant Cu@ZnO interface structure shows superior catalytic performance toward the LT-WGSR with a reaction rate of up to 19.47 μmol_CO g_cat⁻¹ s⁻¹ at 175 °C, which is ∼5 times larger than the commercial Cu/ZnO/Al₂O₃ catalyst. High-resolution transmission electron microscopy (HRTEM) proves that the reduction treatment results in the coverage of Cu nanoparticles by ZnO overlayers induced by a strong metal–support interaction (SMSI). Furthermore, the generation of the coating layers of ZnO structure is conducive to stabilize Cu nanoparticles, accounting for long-term stability under the reaction conditions and excellent start/stop cycle of the Cu@ZnO/Al₂O₃-300R catalyst. This study provides a high-efficiency and low-cost Cu-based catalyst for the LT-WGSR and gives a concrete example to help understand the role of Cu@ZnO interface structure in dominating the catalytic activity and stability toward WGSR.

The water–gas shift reaction (WGSR) plays a pivotal role in many important industrial processes as well as in the elimination of residual CO in feed gas for fuel cells.

Metal-incorporated mesoporous oxides: Synthesis and applications

Mesoporous oxides are outstanding metal nanoparticle catalyst supports owing to their well-defined porous structures. Such mesoporous architectures not only prevent the aggregation of metal nanoparticles but also enhance their catalytic performance. Metal/metal oxide heterojunctions exhibit unique chemical and physical properties because of the surface reconstruction around the junction and electron transfer/interaction across the interface. This article reviews the methods used for synthesizing metal-supported hybrid nanostructures and their applications as catalysts for environmental remediation and sensors for detecting hazardous materials.

Effects of precipitants on the catalytic performance of Cu/CeO2 catalysts for the water–gas shift reaction

The ratio of the precipitant (K2CO3 : KOH) was confirmed to affect the Cu dispersion and OSC of the Cu/CeO2 catalyst, and the Cu/CeO2 catalyst prepared with the K2CO3 : KOH ratio of 3 : 1 showed the highest activity.

DFT study the water-gas shift reaction over Cu/α-MoC surface

Cu-based catalysts have been widely used for water-gas shift reaction (WGS, CO + H₂O → CO₂ + H₂), and α-MoC support also shows the good performance for the reaction. Therefore, WGS reaction is systematically studied over Cu/α-MoC by using density functional theory (DFT). DFT result shows the strong metal-support interaction between Cu and α-MoC(111) support. As a result, an extensive tensile strain is introduced in the Cu lattice due to α-MoC support, and Cu 3d band center shifts to Fermi level. However, the strong metal-support interaction does not lead to significant polarization of the Cu/α-MoC surface due to the less charge transfer from Mo to Cu. For the WGS reaction, small Cu particles on α-MoC(111) are likely to facilitate the reaction. At the interface of Cu-α-MoC(111), oxygen stabilizes the dissociated *H, which is benefit of H₂O scission. Then, the activity increases compared with Cu(111) surface. In general, small Cu particles on α-MoC support also have good activity for WGS reaction compared with Au deposition on α-MoC. Graphical abstract.

Elucidation of Water Promoter Effect of Proton Conductor in WGS Reaction over Pt-Based Catalyst: An Operando DRIFTS Study

A conventional Pt/CeO2/Al2O3 catalyst physically mixed with an ionic conductor (Mo- or Eu-doped ZrO2) was tested at high space velocity (20,000 h−1 and 80 L h−1 gcat−1) under model conditions (only with CO and H2O) and industrial conditions, with a realistic feed. The promoted system with the ionic conductor physically mixed showed better catalytic activity associated with better water dissociation and mobility, considered as a rate-determining step. The water activation was assessed by operando diffuse reflectance infrared fourier transformed spectroscopy (DRIFTS) studies under reaction conditions and the Mo-containing ionic conductor exhibited the presence of both dissociated (3724 cm−1) and physisorbed (5239 cm−1) water on the Eu-doped ZrO2 solid solution, which supports the appearance of proton conductivity by Grotthuss mechanism. Moreover, the band at 3633 cm−1 ascribed to hydrated Mo oxide, which increases with the temperature, explains the increase of catalytic activity when the physical mixture was used in a water gas shift (WGS) reaction.

Understanding the Photocatalytic Properties of Pt/CeOx /TiO2 : Structural Effects on Electronic and Optical Properties

Ceria-titania interfaces play a crucial role in different chemical processes but are especially promising for the photocatalytic splitting of water using light in the visible wavelength region when Pt is added to the system. However, the complexity of this hierarchical structure hampers the study of the origin of its outstanding properties. In this article, the structural, electronic and optoelectronic properties of CeO₂ /TiO₂ systems containing 1D, 2D, and 3D particles of ceria are analyzed by means of density functional calculations. Adsorption sites and vacancy effects have been studied to model Pt adsorption. Density of states calculations and absorption spectra simulations explain the behavior of these systems. Finally, these models are used for the screening of other metals that can be combined with this heterostructure to potentially find more efficient water splitting photocatalysts.

Improving the activity of gold nanoparticles for the water-gas shift reaction using TiO2-Y2O3: an example of catalyst design

In the last ten years, there has been an acceleration in the pace at which new catalysts for the water-gas shift reaction are designed and synthesized. Pt-based catalysts remain the best solution when only activity is considered. However, cost, operation temperature, and deactivation phenomena are important variables when these catalysts are scaled in industry. Here, a new catalyst, Au/TiO2-Y2O3, is presented as an alternative to the less selective Pt/oxide systems. Experimental and theoretical techniques are combined to design, synthesize, characterize and analyze the performance of this system. The mixed oxide demonstrates a synergistic effect, improving the activity of the catalyst not only at large-to-medium temperatures but also at low temperatures. This effect is related to the homogeneous dispersion of the vacancies that act both as nucleation centers for smaller and more active gold nanoparticles and as dissociation sites for water molecules. The calculated reaction path points to carboxyl formation as the rate-limiting step with an activation energy of 6.9 kcal mol-1, which is in quantitative agreement with experimental measurements and, to the best of our knowledge, it is the lowest activation energy reported for the water-gas shift reaction. This discovery demonstrates the importance of combining experimental and theoretical techniques to model and understand catalytic processes and opens the door to new improvements to reduce the operating temperature and the deactivation of the catalyst.

Black TiO2−x with stable surface oxygen vacancies as the support of efficient gold catalysts for water-gas shift reaction

H₂-etching engineered oxygen vacancies on black TiO_2−x to enhance the hot-electron flow and water-gas shift catalytic performance of Au catalysts.

Alloying copper and palladium nanoparticles by pulsed laser irradiation of colloids suspended in ethanol

Nanoparticles (NPs) of copper, palladium and Cu_0.8Pd_0.2 alloy have been prepared by pulsed laser ablation/irradiation in ethanol, by the second harmonic of a pulsed Nd : YAG laser (532 nm, ∼5 ns, 10 Hz). The monometallic NPs were synthesized by laser ablation of pure bulk targets immersed in ethanol and the alloyed ones by laser irradiation of stirred mixtures of suspended monometallic colloids. The suspensions were irradiated through two distinctive configurations, including lateral collimated and top focused beams that reached the corresponding fluences for NPs vaporization and for extensive plasma formation. The generated NPs were characterized by ultraviolet-visible absorption spectrometry, low and high-resolution transmission electron microscopy, energy-dispersive spectroscopy and selected area electron diffraction. The first fluence regime afforded the synthesis of alloyed NPs in the few nm diameter range, where alloying was somewhat disturbed by agglomeration, while the second led to larger size NPs and faster alloying, due to laser scattering by the plasma. These findings were supported and interpreted by the particle heating-melting-evaporation model. The approach developed here, assisted by the model and the various characterization methods, proved to control the alloying process and the size distribution of the NPs and to give the best indication for its progress.

Synthesis of alloyed copper palladium nanoparticles through lateral collimated and top focused laser irradiation of their suspended colloids in ethanol. These configurations allowed control of the extent of alloying at the nanoscale.

Ceria-based model catalysts: fundamental studies on the importance of the metal–ceria interface in CO oxidation, the water–gas shift, CO2 hydrogenation, and methane and alcohol reforming

Model metal/ceria and ceria/metal catalysts have shown to be excellent systems for studying fundamental phenomena linked to the operation of technical catalysts.

Potassium and Water Coadsorption on TiO2(110): OH-Induced Anchoring of Potassium and the Generation of Single-Site Catalysts

Potassium deposition on TiO₂(110) results in reduction of the substrate and formation of loosely bound potassium species that can move easily on the oxide surface to promote catalytic activity. The results of density functional calculations predict a large adsorption energy (∼3.2 eV) with a small barrier (∼0.25 eV) for diffusion on the oxide surface. In scanning tunneling microscopy images, the adsorbed alkali atoms lose their mobility when in contact with surface OH groups. Furthermore, K adatoms facilitate the dissociation of water on the titania surface. The K-(OH) species generated are good sites for the binding of gold clusters on the TiO₂(110) surface, producing Au/K/TiO₂(110) systems with high activity for the water-gas shift.