Defects do Catalysis: CO Monolayer Oxidation and Oxygen Reduction Reaction on Hollow PtNi/C Nanoparticles

Design and regulation of defective electrocatalysts

Electrocatalysts are the key components of electrochemical energy storage and conversion devices. High performance electrocatalysts can effectively reduce the energy barrier of the chemical reactions, thereby improving the conversion efficiency of energy devices. The electrocatalytic reaction mainly experiences adsorption and desorption of molecules (reactants, intermediates and products) on a catalyst surface, accompanied by charge transfer processes. Therefore, surface control of electrocatalysts plays a pivotal role in catalyst design and optimization. In recent years, many studies have revealed that the rational design and regulation of a defect structure can result in rearrangement of the atomic structure on the catalyst surface, thereby efficaciously promoting the electrocatalytic performance. However, the relationship between defects and catalytic properties still remains to be understood. In this review, the types of defects, synthesis methods and characterization techniques are comprehensively summarized, and then the intrinsic relationship between defects and electrocatalytic performance is discussed. Moreover, the application and development of defects are reviewed in detail. Finally, the challenges existing in defective electrocatalysts are summarized and prospected, and the future research direction is also suggested. We hope that this review will provide some principal guidance and reference for researchers engaged in defect and catalysis research, better help researchers understand the research status and development trends in the field of defects and catalysis, and expand the application of high-performance defective electrocatalysts to the field of electrocatalytic engineering.

Grain boundary engineering for efficient and durable electrocatalysis

Grain boundaries in noble metal catalysts have been identified as critical sites for enhancing catalytic activity in electrochemical reactions such as the oxygen reduction reaction. However, conventional methods to modify grain boundary density often alter particle size, shape, and morphology, obscuring the specific role of grain boundaries in catalytic performance. This study addresses these challenges by employing gold nanoparticle assemblies to control grain boundary density through the manipulation of nanoparticle collision frequency during synthesis. We demonstrate a direct correlation between increased grain boundary density and enhanced two-electron oxygen reduction reaction activity, achieving a significant improvement in both specific and mass activity. Additionally, the gold nanoparticle assemblies with high grain boundary density exhibit remarkable electrochemical stability, attributed to boron segregation at the grain boundaries, which prevents structural degradation. This work provides a promising strategy for optimizing the activity, selectivity, and stability of noble metal catalysts through precise grain boundary engineering.

Operando Electrodeposition of Nonprecious Metal Copper Nanocatalysts on Low-Dimensional Support Materials for Nitrate Reduction Reactions

Supported nonprecious metal catalysts such as copper (Cu) are promising replacements for Pt-based catalysts for a wide range of energy-related electrochemical reactions. Direct electrochemical deposition is one of the most straightforward and versatile methods to synthesize supported nonprecious metal catalysts. However, further advancement in the design of supported nonprecious metal catalysts requires a detailed mechanistic understanding of the interplay between kinetics and thermodynamics of the deposition phenomena under realistic reaction conditions. Here, we study the electrodeposition of Cu on carbon nanotubes and graphene derivatives under electrochemical conditions using in situ liquid cell transmission electron microscopy (TEM). By combining real-time imaging, electrochemical measurements, X-ray photoelectron spectroscopy (XPS), and finite-element analysis (FEA), we show that low-dimensional support materials, especially carbon nanotubes, are excellent for generating uniform and finely dispersed platinum group metal-(PGM)-free catalysts under mild electrochemical conditions. The electrodeposited Cu on graphene and carbon nanotubes is also observed to show good electrochemical activity toward nitrate reduction reactions (NO3RRs), further supported by density functional theory (DFT) calculations. Nitrogen doping plays an important role in guiding nonprecious metal deposition, but its low electrical conductivity may give rise to lower NO3RR activity compared to its nondoped analogue. The development of supported nonprecious metals through interfacial and surface engineering for the design of supported catalysts will substantially reduce the demand for precious metals and generate robust catalysts with better durability, thereby presenting opportunities for solving the critical problems in energy storage and electrocatalysis.

Metal-Support Interaction between Titanium Oxynitride and Pt Nanoparticles Enables Efficient Low-Pt-Loaded High-Performance Electrodes at Relevant Oxygen Reduction Reaction Current Densities

In the present work, we report on a synergistic relationship between platinum nanoparticles and a titanium oxynitride support (TiOxNy/C) in the context of oxygen reduction reaction (ORR) catalysis. As demonstrated herein, this composite configuration results in significantly improved electrocatalytic activity toward the ORR relative to platinum dispersed on carbon support (Pt/C) at high overpotentials. Specifically, the ORR performance was assessed under an elevated mass transport regime using the modified floating electrode configuration, which enabled us to pursue the reaction closer to PEMFC-relevant current densities. A comprehensive investigation attributes the ORR performance increase to a strong interaction between platinum and the TiOxNy/C support. In particular, according to the generated strain maps obtained via scanning transmission electron microscopy (STEM), the Pt-TiOxNy/C analogue exhibits a more localized strain in Pt nanoparticles in comparison to that in the Pt/C sample. The altered Pt structure could explain the measured ORR activity trend via the d-band theory, which lowers the platinum surface coverage with ORR intermediates. In terms of the Pt particle size effect, our observation presents an anomaly as the Pt-TiOxNy/C analogue, despite having almost two times smaller nanoparticles (2.9 nm) compared to the Pt/C benchmark (4.8 nm), manifests higher specific activity. This provides a promising strategy to further lower the Pt loading and increase the ECSA without sacrificing the catalytic activity under fuel cell-relevant potentials. Apart from the ORR, the platinum-TiOxNy/C interaction is of a sufficient magnitude not to follow the typical particle size effect also in the context of other reactions such as CO stripping, hydrogen oxidation reaction, and water discharge. The trend for the latter is ascribed to the lower oxophilicity of Pt-based on electrochemical surface coverage analysis. Namely, a lower surface coverage with oxygenated species is found for the Pt-TiOxNy/C analogue. Further insights were provided by performing a detailed STEM characterization via the identical location mode (IL-STEM) in particular, via 4DSTEM acquisition. This disclosed that Pt particles are partially encapsulated within a thin layer of TiOxNy origin.

The ABC of Generalized Coordination Numbers and Their Use as a Descriptor in Electrocatalysis

The quest for enhanced electrocatalysts can be boosted by descriptor-based analyses. Because adsorption energies are the most common descriptors, electrocatalyst design is largely based on brute-force routines that comb materials databases until an energetic criterion is verified. In this review, it is shown that an alternative is provided by generalized coordination numbers (denoted by CN ¯ $\overline {{\rm{CN}}} $ or GCN), an inexpensive geometric descriptor for strained and unstrained transition metals and some alloys. CN ¯ $\overline {{\rm{CN}}} $ captures trends in adsorption energies on both extended surfaces and nanoparticles and is used to elaborate structure-sensitive electrocatalytic activity plots and selectivity maps. Importantly, CN ¯ $\overline {{\rm{CN}}} $ outlines the geometric configuration of the active sites, thereby enabling an atom-by-atom design, which is not possible using energetic descriptors. Specific examples for various adsorbates (e.g., *OH, *OOH, *CO, and *H), metals (e.g., Pt and Cu), and electrocatalytic reactions (e.g., O₂  reduction, H₂  evolution, CO oxidation, and reduction) are presented, and comparisons are made against other descriptors.

Imaging the strain evolution of a platinum nanoparticle under electrochemical control

Surface strain is widely employed in gas phase catalysis and electrocatalysis to control the binding energies of adsorbates on active sites. However, in situ or operando strain measurements are experimentally challenging, especially on nanomaterials. Here we exploit coherent diffraction at the new fourth-generation Extremely Brilliant Source of the European Synchrotron Radiation Facility to map and quantify strain within individual Pt catalyst nanoparticles under electrochemical control. Three-dimensional nanoresolution strain microscopy, together with density functional theory and atomistic simulations, show evidence of heterogeneous and potential-dependent strain distribution between highly coordinated ({100} and {111} facets) and undercoordinated atoms (edges and corners), as well as evidence of strain propagation from the surface to the bulk of the nanoparticle. These dynamic structural relationships directly inform the design of strain-engineered nanocatalysts for energy storage and conversion applications.

Insights into the Dynamic Evolution of Defects in Electrocatalysts

This review focuses on the formation and preparation of defects, the dynamic evolution process of defects, and the influence of defect dynamic evolution on catalytic reactions. The summary of the current advances in the dynamic evolution process of defects in oxygen evolution reaction, hydrogen evolution reaction, nitrogen reduction reaction, oxygen reduction reaction, and carbon dioxide reduction reaction, and the given perspectives are expected to provide a more comprehensive understanding of defective electrocatalysts on the structural evolution process during electrocatalysis and the reaction mechanisms, especially for the defect dynamic evolution on the performance in catalytic reactions.

Efficient Charge Transfers in Highly Conductive Copper Selenide Quantum Dot-Confined Catalysts for Robust Oxygen Evolution Reaction

Defective quantum dots (QDs) are the emerging materials for catalysis by virtue of their atomic-scale size, high monodispersity, and ultra-high specific surface area. However, the dispersed nature of QDs fundamentally prohibits the efficient charge transfer in various catalytic processes. Here, we report efficient and robust electrocatalytic oxygen evolution based on defective and highly conductive copper selenide (CuSe) QDs confined in an amorphous carbon matrix with good uniformity (average diameter 4.25 nm) and a high areal density (1.8 × 10¹² cm^-2). The CuSe QD-confined catalysts with abundant selenide vacancies were prepared by using a pulsed laser deposition system benefitted by high substrate temperature and ultrahigh vacuum growth conditions, as evidenced by electron paramagnetic resonance characterizations. An ultra-low charge transfer resistance (about 7 Ω) determined by electrochemical impedance spectroscopy measurement indicates the efficient charge transfer of CuSe quantum-confined catalysts, which is guaranteed by its high conductivity (with a low resistivity of 2.33 μΩ·m), as revealed by electrical transport measurements. Our work provides a universal design scheme of the dispersed QD-based composite catalysts and demonstrates the CuSe QD-confined catalysts as an efficient and robust electrocatalyst for oxygen evolution reaction.

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. In this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core-shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

Spatiotemporal Temperature and Pressure in Thermoplasmonic Gold Nanosphere-Water Systems

We offer a detailed investigation of the photophysical properties of plasmonic solid and hollow gold nanospheres suspended in water by combining ultrafast transient absorption (TA) spectroscopy with molecular dynamics (MD) simulations. TA reveals that hollow gold nanospheres (HGNs) exhibit faster excited state relaxation and larger amplitude acoustic phonon modes than solid gold nanoparticles of the same outer diameter. MD simulation carried out on full scale nanoparticle-water models (over 10 million atoms) to simulate the temporal evolution (0-100 ps) of the thermally excited particles (1000 or 1250 K) provides atomic-scale resolution of the spatiotemporal temperature and pressure maps, as well as visualization of the lattice vibrational modes. For the 1000 K HGN, temperatures upward of 500 K in the vicinity of the shell surface were observed, along with pressures up to several hundred MPa in the inner cavity, revealing potential use as a photoinduced nanoreactor. Our approach of combining TA and MD provides a path to better understanding how thermal-structural properties (such as expansion and contraction) and thermal-optical properties (such as modulated dielectrics) manifest themselves as TA signatures. The detailed picture of heat transfer at interfaces should help guide nanoparticle design for a wide range of applications that rely on photothermal conversion, including photothermal coupling agents for nanoparticle-mediated photothermal therapy and photocatalysts for light-driven chemical reactions.

Potential-Dependent Morphology of Copper Catalysts During CO2 Electroreduction Revealed by In Situ Atomic Force Microscopy

Electrochemical AFM is a powerful tool for the real-space characterization of catalysts under realistic electrochemical CO2 reduction (CO2 RR) conditions. The evolution of structural features ranging from the micrometer to the atomic scale could be resolved during CO2 RR. Using Cu(100) as model surface, distinct nanoscale surface morphologies and their potential-dependent transformations from granular to smoothly curved mound-pit surfaces or structures with rectangular terraces are revealed during CO2 RR in 0.1 m KHCO3 . The density of undercoordinated copper sites during CO2 RR is shown to increase with decreasing potential. In situ atomic-scale imaging reveals specific adsorption occurring at distinct cathodic potentials impacting the observed catalyst structure. These results show the complex interrelation of the morphology, structure, defect density, applied potential, and electrolyte in copper CO2 RR catalysts.

Co3O4@NiCo2O4 double-shelled nanocages with hierarchical hollow structure and oxygen vacancies as efficient bifunctional electrocatalysts for rechargeable Zn-air batteries

Highly efficient bifunctional oxygen electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucially important for the rechargeable Zn-air battery, a potential power source for applications in electric vehicles and grid-scale stationary storage systems. Herein, Co3O4@NiCo2O4 double-shelled nanocages (Co3O4@NiCo2O4 DSNCs) with hierarchical hollow structure and oxygen vacancies were designed and synthesized via annealing metal-organic frameworks. Co3O4@NiCo2O4 DSNCs with large specific surface area and three-dimensional interconnected mesopores and cavity not only provide more reaction sites, but also offer an efficient transport environment for reactants. Moreover, oxygen vacancies on the surfaces improve the capture of oxygen species to enhance the reactivity of the catalyst. Consequently, Co3O4@NiCo2O4 DSNCs displayed excellent bifunctional electrocatalytic performance, with a positive half-wave potential of 0.81 V (vs. reversible hydrogen electrode, RHE) for ORR (approaching the potential of commercial Pt/C catalyst) and a low potential of 1.65 V at 10 mA cm-2 for OER (exceeding Pt/C). In a practical demonstration, the Zn-air battery using Co3O4@NiCo2O4 DSNCs as the cathode delivered a satisfactory power density of 102.1 mW cm-2, comparable to the Zn-air battery with a Pt/C cathode, and exhibited much longer cycling stability.

Anisotropy of Pt nanoparticles on carbon- and oxide-support and their structural response to electrochemical oxidation probed by in situ techniques

Identifying the structural response of nanoparticle-support ensembles to the reaction conditions is essential to determine their structure in the catalytically active state as well as to unravel the possible degradation pathways. In this work, we investigate the (electronic) structure of carbon- and oxide-supported Pt nanoparticles during electrochemical oxidation by in situ X-ray diffraction, absorption spectroscopy as well as the Pt dissolution rate by in situ mass spectrometry. We prepared ellipsoidal Pt nanoparticles by impregnation of the carbon and titanium-based oxide support as well as spherical Pt nanoparticles on an indium-based oxide support by a surfactant-assisted synthesis route. During electrochemical oxidation, we show that the oxide-supported Pt nanoparticles resist (bulk) oxide formation and Pt dissolution. The lattice of smaller Pt nanoparticles exhibits a size-induced lattice contraction in the as-prepared state with respect to bulk Pt but it expands reversibly during electrochemical oxidation. This expansion is suppressed for the Pt nanoparticles with a bulk-like relaxed lattice. We could correlate the formation of d-band vacancies in the metallic Pt with Pt lattice expansion. PtOx formation is strongest for platelet-like nanoparticles and we explain this with a higher fraction of exposed Pt(100) facets. Of all investigated nanoparticle-support ensembles, the structural response of RuO2/TiO2-supported Pt nanoparticles is the most promising with respect to their morphological and structural integrity under electrochemical reaction conditions.

Atomic-scale study of nanocatalysts by aberration-corrected electron microscopy

Aberration-corrected electron microscopy (AC-EM) including transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) has become one of the most powerful technologies in the studies of nanocatalysts. With the current spatial resolution of sub-0.5 Å and energy resolution of 10 meV, AC-EM can quantificationally articulate the connection between catalytic properties and atomic configurations of nanocatalysts. However, the restricted irradiation sensitive characteristics of specimens pose an obstacle to solve their intrinsic structure. Low-dose imaging should be applied to overcome this problem. In addition, the choice of appropriate imaging method is also crucial to tackle specific structural problems of nanocatalysts. On the basis of careful management of electron dose and selection of suitable imaging method,in situgas and liquid S/TEM are able to reveal the structure evolution of nanocatalysts in real-time. Further combination with residual gas analysis would deepen the understanding of the catalytic reaction.

Achieving Superior Electrocatalytic Performance by Surface Copper Vacancy Defects during Electrochemical Etching Process

Vacancy defects of catalysts have been extensively studied and proven to be beneficial to various electrocatalytic reactions. Herein, an ultra-stable three-dimensional PtCu nanowire network (NNW) with ultrafine size, self-supporting rigid structure, and Cu vacancy defects has been developed. The vacancy defect-rich PtCu NNW exhibits an outstanding performance for the oxygen reduction reaction (ORR), with a mass activity 14.1 times higher than for the commercial Pt/C catalyst (20 %.wt, JM), which is currently the best performance. The mass activity of the PtCu NNW for methanol oxidation reaction (MOR) is 17.8 times higher than for the commercial Pt/C catalyst. Density-functional theory (DFT) calculations indicate that the introduction of Cu vacancies enhances the adsorption capacity of Pt atoms to the HO* intermediate and simultaneously weakens the adsorption for the O* intermediate. This work presents a facile strategy to assemble efficient electrocatalysts with abundant vacancy defects, at the same time, provides an insight into the ORR mechanism in acidic solution.

Feed gas exchange (startup/shutdown) effects on Pt/C cathode electrocatalysis and surface Pt-oxide behavior in polymer electrolyte fuel cells as revealed using in situ real-time XAFS and high-resolution STEM measurements

The synchronizing measurements of both cyclic voltammograms (CVs) and real-time quick XAFSs (QXAFSs) for Pt/C cathode electrocatalysts in a membrane electrode assembly (MEA) of polymer electrolyte fuel cells (PEFCs) treated by anode-gas exchange (AGEX) and cathode-gas exchange (CGEX) cycles (startup/shutdown conditions of FC vehicles) were performed for the first time to understand the opposite effects of the AGEX and CGEX treatments on the Pt/C performance and durability and also the contradiction between the electrochemical active surface area (ECSA) decrease and the performance increase by CGEX treatment. While the AGEX treatment decreased both the ECSA and performance of MEA Pt/C due to carbon corrosion, it was found that the CGEX treatment decreased the ECSA but increased the Pt/C performance significantly due to high-index (331) facet formation (high-resolution STEM) and hence the suppression of strongly bound Pt-oxide formation at cathode Pt nanoparticle surfaces. Transient QXAFS time-profile analysis for the MEA Pt/C also revealed a direct relationship between the electrochemical performance or durability and transient kinetics of the Pt/C cathode.

Defect Engineering for Fuel-Cell Electrocatalysts

The commercialization of fuel cells, such as proton exchange membrane fuel cells and direct methanol/formic acid fuel cells, is hampered by their poor stability, high cost, fuel crossover, and the sluggish kinetics of platinum (Pt) and Pt-based electrocatalysts for both the cathodic oxygen reduction reaction (ORR) and the anodic hydrogen oxidation reaction (HOR) or small molecule oxidation reaction (SMOR). Thus far, the exploitation of active and stable electrocatalysts has been the most promising strategy to improve the performance of fuel cells. Accordingly, increasing attention is being devoted to modulating the surface/interface electronic structure of electrocatalysts and optimizing the adsorption energy of intermediate species by defect engineering to enhance their catalytic performance. Defect engineering is introduced in terms of defect definition, classification, characterization, construction, and understanding. Subsequently, the latest advances in defective electrocatalysts for ORR and HOR/SMOR in fuel cells are scientifically and systematically summarized. Furthermore, the structure-activity relationships between defect engineering and electrocatalytic ability are further illustrated by coupling experimental results and theoretical calculations. With a deeper understanding of these complex relationships, the integration of defective electrocatalysts into single fuel-cell systems is also discussed. Finally, the potential challenges and prospects of defective electrocatalysts are further proposed, covering controllable preparation, in situ characterization, and commercial applications.

Formation Mechanism and Gram-Scale Production of PtNi Hollow Nanoparticles for Oxygen Electrocatalysis through In Situ Galvanic Displacement Reaction

Galvanic displacement reaction has been considered a simple method for fabricating hollow nanoparticles. However, the formation of hollow interiors in nanoparticles is not easily achieved owing to the easy oxidization of transition metals, which results in mixed morphologies, and the presence of surfactants on the nanoparticle surface, which severely deteriorates the catalytic activity. In this study, we developed a facile gram-scale methodology for the one-pot preparation of carbon-supported PtNi hollow nanoparticles as an efficient and durable oxygen reduction electrocatalyst without using stabilizing agents or additional processes. The hollow structures were evolved from sacrificial Ni nanoparticles via an in situ galvanic displacement reaction with a Pt precursor, directly following a preannealing process. By sampling the PtNi/C hollow nanoparticles at various reaction times, the structural formation mechanism was investigated using transmission electron microscopy with energy-dispersive X-ray spectroscopy mapping/line-scan profiling. We found out that the structure and morphology of the PtNi hollow nanoparticles were controlled by the acidity of the metal precursor solution and the nanoparticle core size. The synthesized PtNi hollow nanoparticles acted as an oxygen reduction electrocatalyst, with a catalytic activity superior to that of a commercial Pt catalyst. Even after 10 000 cycles of harsh accelerated durability testing, the PtNi/C hollow electrocatalyst showed high performance and durability. We concluded that the Pt-rich layers on the PtNi hollow nanoparticles improved the catalytic activity and durability considerably.

Preserving the Exposed Facets of Pt3Sn Intermetallic Nanocubes During an Order to Disorder Transition Allows the Elucidation of the Effect of the Degree of Alloy Ordering on Electrocatalysis

Controlling which facets are exposed in nanocrystals is crucial to understanding different activity between ordered and disordered alloy electrocatalysts. We modify the degree of ordering of Pt₃Sn nanocubes, while maintaining the shape and size, to enable a direct evaluation of the effect of the order on ORR catalytic activity. We demonstrate a 2.3-fold enhancement in specific activity by 60- and 30%-ordered Pt₃Sn nanocubes compared to 95%-ordered. This was shown to be likely due to surface vacancies in the less-ordered particles. The greater order, however, results in higher stability of the electrocatalyst, with the more disordered nanoparticles showing the dissolution of tin and platinum species during electrocatalysis.

Revealing the atomic ordering of binary intermetallics using in situ heating techniques at multilength scales

Ordered intermetallic nanoparticles are promising electrocatalysts with enhanced activity and durability for the oxygen-reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs). The ordered phase is generally identified based on the existence of superlattice ordering peaks in powder X-ray diffraction (PXRD). However, after employing a widely used postsynthesis annealing treatment, we have found that claims of "ordered" catalysts were possibly/likely mixed phases of ordered intermetallics and disordered solid solutions. Here, we employed in situ heating, synchrotron-based, X-ray diffraction to quantitatively investigate the impact of a variety of annealing conditions on the degree of ordering of large ensembles of Pt3Co nanoparticles. Monte Carlo simulations suggest that Pt3Co nanoparticles have a lower order-disorder phase transition (ODPT) temperature relative to the bulk counterpart. Furthermore, we employed microscopic-level in situ heating electron microscopy to directly visualize the morphological changes and the formation of both fully and partially ordered nanoparticles at the atomic scale. In general, a higher degree of ordering leads to more active and durable electrocatalysts. The annealed Pt3Co/C with an optimal degree of ordering exhibited significantly enhanced durability, relative to the disordered counterpart, in practical membrane electrode assembly (MEA) measurements. The results highlight the importance of understanding the annealing process to maximize the degree of ordering in intermetallics to optimize electrocatalytic activity.

Lattice-strained palladium nanoparticles as active catalysts for the oxygen reduction reaction

Compressive strain was successfully introduced into palladium nanoparticles by a novel pulsed laser ablation technology, leading to dramatic improvement of the catalytic performance in the oxygen reduction reaction.

Assembling Highly Coordinated Pt Sites on Nanoporous Gold for Efficient Oxygen Electroreduction

Pt with high coordination number (HCN) located in the defect surface sites is favorable for high oxygen reduction reaction activity. However, it is still a challenge to design and fabricate such a structure with a high density of Pt HCN sites at minimum Pt usage. Here, using nanoporous Au (NPG) that intrinsically possesses a higher proportion of HCN Au atoms over traditional nanoparticles, we epitaxially deposit Pt monolayer onto NPG to inherit the high-density HCN Pt sites. Among the NPG-Pt catalysts, the one with a smaller ligament size possesses a higher proportion of HCN Pt atoms, thus exhibiting a 5.2-fold specific activity and 18.7-fold mass activity enhancement than the commercial Pt/C catalyst. Moreover, depositing Au atoms on the NPG-Pt surface can further increase the HCN Pt surface exposure, which leads to a 6.9-fold specific activity and 19.1-fold mass activity increase as compared to Pt/C.

Hollow nanoparticles as emerging electrocatalysts for renewable energy conversion reactions

While the realization of clean and sustainable energy conversion systems primarily requires the development of highly efficient catalysts, one of the main issues had been designing the structure of the catalysts to fulfill minimum cost as well as maximum performance. Until now, noble metal-based nanocatalysts had shown outstanding performances toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). However, the scarcity and high cost of them impeded their practical use. Recently, hollow nanostructures including nanocages and nanoframes had emerged as a burgeoning class of promising electrocatalysts. The hollow nanostructures could expose a high proportion of active surfaces while saving the amounts of expensive noble metals. In this review, we introduced recent advances in the synthetic methodologies for generating noble metal-based hollow nanostructures based on thermodynamic and kinetic approaches. We summarized electrocatalytic applications of hollow nanostructures toward the ORR, OER, and HER. We next provided strategies that could endow structural robustness to the flimsy structural nature of hollow structures. Finally, we concluded this review with perspectives to facilitate the development of hollow nanostructure-based catalysts for energy applications.

Recent advances in electrocatalysts toward the oxygen reduction reaction: the case of PtNi octahedra

Designing highly efficient and durable electrocatalysts for the oxygen reduction reaction (ORR), the key step for the operation of polymer electrolyte membrane fuel cells (PEMFCs), is of a pivotal importance for advancing PEMFC technology. Since the most significant progress has been made on Pt3Ni(111) alloy surfaces, nanoscale PtNi alloy octahedra enclosed by (111) facets have emerged as promising electrocatalysts toward the ORR. However, because their practical uses have been hampered by the cost, sluggish reaction kinetics, and poor durability, recent advances have engendered a wide variety of structure-, size-, and composition-controlled bimetallic PtNi octahedra. Herein, we therefore review the important recent developments of PtNi octahedral electrocatalysts point by point to give an overview of the most promising strategies. Specifically, the present review article focuses on the synthetic methods for the PtNi octahedra, the core-shell and multi-metallic strategies for performance improvement, and their structure-, size-, and composition-control-based ORR activity. By considering the results achieved in this field, a prospect for this alloy nanocatalysts system for future sustainable energy applications is also proposed.

Key Factors for Simultaneous Improvements of Performance and Durability of Core-Shell Pt3 Ni/Carbon Electrocatalysts Toward Superior Polymer Electrolyte Fuel Cell

It remains a big challenge to remarkably improve both oxygen reduction reaction (ORR) activity and long-term durability of Pt-M bimetal electrocatalysts simultaneously in the harsh cathode environment toward widespread commercialization of polymer electrolyte fuel cells (PEFC). In this account we found double-promotional effects of carbon micro coil (CMC) support on ORR performance and durability of octahedral Pt₃ Ni nanoparticles (Oh Pt₃ Ni/CMC). The Oh Pt₃ Ni/CMC displayed remarkable improvements of mass activity (MA; 13.6 and 34.1 times) and surface specific activity (SA; 31.3 and 37.0 times) compared to those of benchmark Pt/C (TEC10E20E) and Pt/C (TEC10E50E-HT), respectively. Notably, the Oh Pt₃ Ni/CMC revealed a negligible MA loss after 50,000 triangular-wave 1.0-1.5 V_RHE (startup/shutdown) load cycles, contrasted to MA losses of 40 % (TEC10E20E) and 21.5 % (TEC10E50E-HT) by only 10,000 load cycles. It was also found that the SA increased exponentially with the decrease in the CO stripping peak potential in a series of Pt-M/carbon (M: Ni and Co), which predicts a maximum SA at the curve asymptote. Key factors for simultaneous improvements of performance and durability of core-shell Pt₃ Ni/carbon electrocatalysts toward superior PEFC is also discussed.

Surface distortion as a unifying concept and descriptor in oxygen reduction reaction electrocatalysis

Tuning the surface structure at the atomic level is of primary importance to simultaneously meet the electrocatalytic performance and stability criteria required for the development of low-temperature proton-exchange membrane fuel cells (PEMFCs). However, transposing the knowledge acquired on extended, model surfaces to practical nanomaterials remains highly challenging. Here, we propose 'surface distortion' as a novel structural descriptor, which is able to reconciliate and unify seemingly opposing notions and contradictory experimental observations in regards to the electrocatalytic oxygen reduction reaction (ORR) reactivity. Beyond its unifying character, we show that surface distortion is pivotal to rationalize the electrocatalytic properties of state-of-the-art of PtNi/C nanocatalysts with distinct atomic composition, size, shape and degree of surface defectiveness under a simulated PEMFC cathode environment. Our study brings fundamental and practical insights into the role of surface defects in electrocatalysis and highlights strategies to design more durable ORR nanocatalysts.

A Review on Recent Developments and Prospects for the Oxygen Reduction Reaction on Hollow Pt-alloy Nanoparticles

Due to their interesting electrocatalytic properties for the oxygen reduction reaction (ORR), hollow Pt-alloy nanoparticles (NPs) supported on high-surface-area carbon attract growing interest. However, the suitable synthesis methods and associated mechanisms of formation, the reasons for their enhanced specific activity for the ORR, and the nature of adequate alloying elements and carbon supports for this type of nanocatalysts remain open questions. This Review aims at shedding light on these topics with a special emphasis on hollow PtNi NPs supported onto Vulcan C (PtNi/C). We first show how hollow Pt-alloy/C NPs can be synthesized by a mechanism involving galvanic replacement and the nanoscale Kirkendall effect. Nickel, cobalt, copper, zinc, and iron (Ni, Co, Cu, Zn, and Fe, respectively) were tested for the formation of Pt-alloy/C hollow nanostructures. Our results indicate that metals with standard potential -0.4<E<0.4 V (vs. the normal hydrogen electrode) and propensity to spontaneously form metal borides in the presence of sodium borohydride are adequate sacrificial templates. As they lead to smaller hollow Pt-alloy/C NPs, mesoporous carbon supports are also best suited for this type of synthesis. A comparison of the electrocatalytic activity towards the ORR or the electrooxidation of a CO_ads monolayer, methanol or ethanol of hollow and solid Pt-alloy/C NPs underlines the pivotal role of the structural disorder of the metal lattice, and is supported by ab initio calculations. As evidenced by accelerated stress tests simulating proton-exchange membrane fuel cell cathode operating conditions, the beneficial effect of structural disorder is maintained on the long term, thereby bringing promises for the synthesis of highly active and robust ORR electrocatalysts.

Dilute Au-Containing Ag Nanosponges as a Highly Active and Durable Electrocatalyst for Oxygen Reduction and Alcohol Oxidation Reactions

Zero-dimensional nanoparticles (NPs) have been demonstrated as the promising class of catalysts for various chemical and electrochemical reactions. However, the emerging Au-Ag NP catalysts suffer from single functionality, limited activity enhancement, and unsatisfactory stability problems. Here, we report a facile kinetically controlled solution method to prepare a new class of Au-Ag nanoporous sponges (NSs) composed of three-dimensional networks without using additional stabilizing agents at room temperature. The unexpected shift of the d-band center in our Au-Ag NSs was observed for the first time in Au-Ag bimetallic systems, which effectively activates the Au-Ag NSs for electrochemical reactions. The robust electronic effect coupled with abundant accessible active sites from the hierarchically porous architecture make the bare Au-Ag NSs a superior multifunctional catalyst for oxygen reduction, ethylene glycol (EG) oxidation, and glucose oxidation reactions compared to the commercial Pt/C electrocatalyst in alkaline medium. The optimized AuAg_3.2 NSs deliver a mass activity of 1.26 A mg_Au^-1 toward oxygen reduction reaction, which is ∼8.2 times as high as that of the Pt/C electrocatalyst, simultaneously showing outstanding stability with negligible activity decay after 10 000 cycles. For the anodic reactions, these AuAg_3.2 NSs show extremely high activity and stability toward both EG and glucose catalytic oxidation reactions with a higher mass activity of 7.58 and 1.48 A mg_Au^-1, about 3- and 18.5-fold enhancement than Pt/C, respectively. This work provides important insights into the structural design, performance optimization, and cost reduction to promote the practical applications of liquid fuel cells.

Tuning the Electrocatalytic Oxygen Reduction Reaction Activity and Stability of Shape-Controlled Pt-Ni Nanoparticles by Thermal Annealing - Elucidating the Surface Atomic Structural and Compositional Changes

Shape-controlled octahedral Pt-Ni alloy nanoparticles exhibit remarkably high activities for the electroreduction of molecular oxygen (oxygen reduction reaction, ORR), which makes them fuel-cell cathode catalysts with exceptional potential. To unfold their full and optimized catalytic activity and stability, however, the nano-octahedra require post-synthesis thermal treatments, which alter the surface atomic structure and composition of the crystal facets. Here, we address and strive to elucidate the underlying surface chemical processes using a combination of ex situ analytical techniques with in situ transmission electron microscopy (TEM), in situ X-ray diffraction (XRD), and in situ electrochemical Fourier transformed infrared (FTIR) experiments. We present a robust fundamental correlation between annealing temperature and catalytic activity, where a ∼25 times higher ORR activity than for commercial Pt/C (2.7 A mg_Pt^-1 at 0.9 V_RHE) was reproducibly observed upon annealing at 300 °C. The electrochemical stability, however, peaked out at the most severe heat treatments at 500 °C. Aberration-corrected scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy (EDX) in combination with in situ electrochemical CO stripping/FTIR data revealed subtle, but important, differences in the formation and chemical nature of Pt-rich and Ni-rich surface domains in the octahedral (111) facets. Estimating trends in surface chemisorption energies from in situ electrochemical CO/FTIR investigations suggested that balanced annealing generates an optimal degree of Pt surface enrichment, while the others exhibited mostly Ni-rich facets. The insights from our study are quite generally valid and aid in developing suitable post-synthesis thermal treatments for other alloy nanocatalysts as well.