Enhanced Activity and Stability of Carbon-Decorated Cuprous Oxide Mesoporous Nanorods for CO2 Reduction in Artificial Photosynthesis

Facile Construction Engineering of Pr6O11@C with Efficient Photocatalytic Activity

In this study, facile construction engineering of Pr6O11@C with efficient photocatalytic activity was established. Taking advantage of the flocculation of Pr3+ in the base medium, acid red 14 (AR14) was flocculated together with Pr(OH)3 precipitate, in which Pr(OH)3 and AR14 mixed highly uniformly. Calcinated at high temperature in N2, a novel Pr6O11@C was successfully synthesized. The resulting materials were characterized by XRD, SEM, FT-IR, Raman, and XPS techniques. The results show that the cubic Pr6O11@C with Fm3m space group, similar to that of Pr6O11, was obtained. From the results of the photodegradation of AR14, it is found that the photocatalytic efficiency of Pr6O11@C is higher than that of pure Pr6O11 due to the formation of abundant carbon bonds and oxygen vacancies. Compared with pure Pr6O11 and other carbon-based composites, the acid resistance of Pr6O11@C is greatly improved due to the highly uniform dispersion of Pr6O11 and C, which lays a solid foundation for the practical application of Pr6O11@C. Moreover, the role of NH3·H2O and NaOH used as precipitants for the photocatalytic efficiency of Pr6O11 was investigated in detail.

Design of a Single-Atom In-N3-S site to Modulate Exciton Behavior in Carbon Nitride for Enhanced Photocatalytic Performance

Rational tailoring of the local coordination environment of single atoms has demonstrated a significant impact on the electronic state and catalytic performance, but the development of catalysts beyond noble/transition metals is profoundly significant and highly desired. Herein, the main-group metal indium (In) single atom is immobilized on sulfur-doped porous carbon nitride nanosheets (In@CNS) in the form of three nitrogen atoms coordinated with one sulfur atom (In-N3-S). Both theoretical calculations and advanced characterization investigations clearly elucidated that the single-atomic In-N3-S structures on In@CNS are powerful in promoting the dissociation of excitons into more free carriers as well as the charge separation, synergistically elevating electron concentration by 2.19 times with respect to pristine CNS. Meanwhile, the loading of In single atoms on CNS is responsible for altering electronic structure and lowering the Gibbs free energy for hydrogen adsorption. Consequently, the optimized In@CNS-5.0 exhibited remarkable photocatalytic performance, remarkable water-splitting and tetracycline hydrochloride degradation. The H2 production achieved to 10.11 mmol h-1g-1 with a notable apparent quantum yield of 19.70% at 400 nm and remained at 10.40% at 420 nm. These findings open a new perspective for in-depth comprehending the effect of the main-group metal single-atom coordination environment on promoting photocatalytic performance.

Tailoring the Hydrophobic Interface of Core-Shell HKUST-1@Cu2O Nanocomposites for Efficiently Selective CO2 Electroreduction

The electrochemical reduction of carbon dioxide (CO2) to ethylene creates a carbon-neutral approach to converting carbon dioxide into intermittent renewable electricity. Exploring efficient electrocatalysts with potentially high ethylene selectivity is extremely desirable, but still challenging. In this report, a laboratory-designed catalyst HKUST-1@Cu2O/PTFE-1 is prepared, in which the high specific surface area of the composites with improved CO2 adsorption and the abundance of active sites contribute to the increased electrocatalytic activity. Furthermore, the hydrophobic interface constructed by the hydrophobic material polytetrafluoroethylene (PTFE) effectively inhibits the occurrence of hydrogen evolution reactions, providing a significant improvement in the efficiency of CO2 electroreduction. The distinctive structures result in the remarkable hydrocarbon fuels generation with high Faraday efficiency (FE) of 67.41%, particularly for ethylene with FE of 46.08% (-1.0 V vs RHE). The superior performance of the catalyst is verified by DFT calculation with lower Gibbs free energy of the intermediate interactions with improved proton migration and selectivity to emerge the polycarbon（C2+） product. In this work, a promising and effective strategy is presented to configure MOF-based materials with tailored hydrophobic interface, high adsorption selectivity and more exposed active sites for enhancing the efficiency of the electroreduction of CO2 to C2+ products with high added value.

Solar-driven CO2-to-ethanol conversion enabled by continuous CO2 transport via a superhydrophobic Cu2O nano fence

The overall photocatalytic CO2 reduction reaction presents an eco-friendly approach for generating high-value products, specifically ethanol. However, ethanol production still faces efficiency issues (typically formation rates <605 μmol g-1 h-1). One significant challenge arises from the difficulty of continuously transporting CO2 to the catalyst surface, leading to inadequate gas reactant concentration at reactive sites. Here, we develop a mesoporous superhydrophobic Cu2O hollow structure (O-CHS) for efficient gas transport. O-CHS is designed to float on an aqueous solution and act as a nano fence, effectively impeding water infiltration into its inner space and enabling CO2 accumulation within. As CO2 is consumed at reactive sites, O-CHS serves as a gas transport channel and diffuser, continuously and promptly conveying CO2 from the gas phase to the reactive sites. This ensures a stable high CO2 concentration at reactive sites. Consequently, O-CHS achieves the highest recorded ethanol formation rate (996.18 μmol g-1 h-1) to the best of our knowledge. This strategy combines surface engineering with geometric modulation, providing a promising pathway for multi-carbon production.

Cu-Based Materials for Enhanced C2+ Product Selectivity in Photo-/Electro-Catalytic CO2 Reduction: Challenges and Prospects

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO2, Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C2+ compounds through C-C coupling process. Herein, the basic principles of photocatalytic CO2 reduction reactions (PCO2RR) and electrocatalytic CO2 reduction reaction (ECO2RR) and the pathways for the generation C2+ products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO2RR and ECO2RR is emphasized. Through a review of recent studies on PCO2RR and ECO2RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C2+ products. Finally, the opportunities and challenges associated with Cu-based materials in the CO2 catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO2 reduction processes in the future.

Construction of Low-Cost Z-Scheme Heterojunction Cu2O/PCN-250 Photocatalysts Simultaneously for the Enhanced Photoreduction of CO2 to Alcohols and Photooxidation of Water

Solar-driven high-efficiency conversion of CO2 with water vapor into high-value-added alcohols is a promising approach for reducing CO2 emissions and achieving carbon neutrality. However, the rapid recombination of photogenerated carriers and low CO2 adsorption capacity of photocatalysts are usually the factors that limit their applicability. Herein, a series of low-cost Z-scheme heterostructures Cu2O/PCN-250-x are constructed by in situ growth of ultrasmall Cu2O nanoparticles on PCN-250. A systematic investigation revealed that there is a strong interaction between Cu2O nanoparticles and PCN-250. The resulting Cu2O/PCN-250-2 exhibits excellent photogenerated carrier separation efficiency and CO2 adsorption capacity, which dramatically promote the conversion of CO2 into alcohols. Notably, the total yield of 268 μmol gcat-1 for the production of CH3OH and CH3H2OH is superior to that of isolated PCN-250 and Cu2O. This study provides a new perspective for the design of a Cu2O nanoparticle/metal-organic framework Z-scheme heterojunction for the reduction of CO2 to alcohols with water vapor.

Coupling Benzylamine Oxidation with CO2 Photoconversion to Ethanol over a Black Phosphorus and Bismuth Tungstate S-Scheme Heterojunction

Photoconversion of CO2 and H2 O into ethanol is an ideal strategy to achieve carbon neutrality. However, the production of ethanol with high activity and selectivity is challenging owing to the less efficient reduction half-reaction involving multi-step proton-coupled electron transfer (PCET), a slow C-C coupling process, and sluggish water oxidation half-reaction. Herein, a two-dimensional/two-dimensional (2D/2D) S-scheme heterojunction consisting of black phosphorus and Bi2 WO6 (BP/BWO) was constructed for photocatalytic CO2 reduction coupling with benzylamine (BA) oxidation. The as-prepared BP/BWO catalyst exhibits a superior photocatalytic performance toward CO2 reduction, with a yield of 61.3 μmol g-1  h-1 for ethanol (selectivity of 91 %).In situ spectroscopic studies and theoretical calculations reveal that S-scheme heterojunction can effectively promote photogenerated carrier separation via the Bi-O-P bridge to accelerate the PCET process. Meanwhile, electron-rich BP acts as the active site and plays a vital role in the process of C-C coupling. In addition, the substitution of BA oxidation for H2 O oxidation can further enhance the photocatalytic performance of CO2 reduction to C2 H5 OH. This work opens a new horizon for exploring novel heterogeneous photocatalysts in CO2 photoconversion to C2 H5 OH based on cooperative photoredox systems.

Converting CO2 into Value-Added Products by Cu2 O-Based Catalysts: From Photocatalysis, Electrocatalysis to Photoelectrocatalysis

Converting CO₂ into value-added products by photocatalysis, electrocatalysis, and photoelectrocatalysis is a promising method to alleviate the global environmental problems and energy crisis. Among the semiconductor materials applied in CO₂ catalytic reduction, Cu₂ O has the advantages of abundant reserves, low price and environmental friendliness. Moreover, Cu₂ O has unique adsorption and activation properties for CO₂ , which is conducive to the generation of C₂₊ products through CC coupling. This review introduces the basic principles of CO₂ reduction and summarizes the pathways for the generation of C₁ , C₂ , and C₂₊ products. The factors affecting CO₂ reduction performance are further discussed from the perspective of the reaction environment, medium, and novel reactor design. Then, the properties of Cu₂ O-based catalysts in CO₂ reduction are summarized and several optimization strategies to enhance their stability and redox capacity are discussed. Subsequently, the application of Cu₂ O-based catalysts in photocatalytic, electrocatalytic, and photoelectrocatalytic CO₂ reduction is described. Finally, the opportunities, challenges and several research directions of Cu₂ O-based catalysts in the field of CO₂ catalytic reduction are presented, which is guidance for its wide application in the energy and environmental fields is provided.

Tandem Photocatalysis of CO2 to C2H4 via a Synergistic Rhenium-(I) Bipyridine/Copper-Porphyrinic Triazine Framework

The photocatalytic conversion of CO₂ into C₂₊ products such as ethylene is a promising path toward the carbon neutral goal but remains a big challenge due to the high activation barrier for CO₂ and similar reduction potentials of many possible multi-electron-transfer products. Herein, an effective tandem photocatalysis strategy has been developed to support conversion of CO₂ to ethylene by construction of the synergistic dual sites in rhenium-(I) bipyridine fac-[Re^I(bpy)(CO)₃Cl] (Re-bpy) and copper-porphyrinic triazine framework [PTF(Cu)]. With these two catalysts, a large amount of ethylene can be produced at a rate of 73.2 μmol g^-1 h^-1 under visible light irradiation. However, ethylene cannot be obtained from CO₂ by use of either component of the Re-bpy or PTF(Cu) catalysts alone; with a single catalyst, only monocarbon product CO is produced under similar conditions. In the tandem photocatalytic system, the CO generated at the Re-bpy sites is adsorbed by the nearby Cu single sites in PTF(Cu), and this is followed by a synergistic C-C coupling process which ultimately produces ethylene. Density functional theory calculations demonstrate that the coupling process between PTF(Cu)-*CO and Re-bpy-*CO to form the key intermediate Re-bpy-*CO-*CO-PTF(Cu) is vital to the C₂H₄ production. This work provides a new pathway for the design of efficient photocatalysts for photoconversion of CO₂ to C₂ products via a tandem process driven by visible light under mild conditions.

Single-Site Metal-Organic Framework and Copper Foil Tandem Catalyst for Highly Selective CO2 Electroreduction to C2 H4

Tandem catalysis is a promising way to break the limitation of linear scaling relationship for enhancing efficiency, and the desired tandem catalysts for electrochemical CO₂ reduction reaction (CO₂ RR) are urgent to be developed. Here, a tandem electrocatalyst created by combining Cu foil (CF) with a single-site Cu(II) metal-organic framework (MOF), named as Cu-MOF-CF, to realize improved electrochemical CO₂ RR performance, is reported. The Cu-MOF-CF shows suppression of CH₄ , great increase in C₂ H₄ selectivity (48.6%), and partial current density of C₂ H₄ at -1.11 V versus reversible hydrogen electrode. The outstanding performance of Cu-MOF-CF for CO₂ RR results from the improved microenvironment of the Cu active sites that inhibits CH₄ production, more CO intermediate produced by single-site Cu-MOF in situ for CF, and the enlarged active surface area by porous Cu-MOF. This work provides a strategy to combine MOFs with copper-based electrocatalysts to establish high-efficiency electrocatalytic CO₂ RR.

Promoting Photocatalytic Carbon Dioxide Reduction by Tuning the Properties of Cocatalysts

Suppressing the amount of carbon dioxide in the atmosphere is an essential measure toward addressing global warming. Specifically, the photocatalytic CO₂ reduction reaction (CRR) is an effective strategy because it affords the conversion of CO₂ into useful carbon feedstocks by using sunlight and water. However, the practical application of photocatalyst-promoting CRR (CRR photocatalysts) requires significant improvement of their conversion efficiency. Accordingly, extensive research is being conducted toward improving semiconductor photocatalysts, as well as cocatalysts that are loaded as active sites on the photocatalysts. In this review, we summarize recent research and development trends in the improvement of cocatalysts, which have a significant impact on the catalytic activity and selectivity of photocatalytic CRR. We expect that the advanced knowledge provided on the improvement of cocatalysts for CRR in this review will serve as a general guideline to accelerate the development of highly efficient CRR photocatalysts.

Recent advancement in conjugated polymers based photocatalytic technology for air pollutants abatement: Cases of CO2, NOx, and VOCs

According to World Health Organization (WHO) survey, air pollution has become the major reason of several fatal diseases, which had led to the death of 7 million peoples around the globe. The 9 people out of 10 breathe air, which exceeds WHO recommendations. Several strategies are in practice to reduce the emission of pollutants into the air, and also strict industrial, scientific, and health recommendations to use sustainable green technologies to reduce the emission of contaminants into the air. Photocatalysis technology recently has been raised as a green technology to be in practice towards the removal of air pollutants. The scientific community has passed a long pathway to develop such technology from the material, and reactor points of view. Many classes of photoactive materials have been suggested to achieve such a target. In this context, the contribution of conjugated polymers (CPs), and their modification with some common inorganic semiconductors as novel photocatalysts, has never been addressed in literature till now for said application, and is critically evaluated in this review. As we know that CPs have unique characteristics compared to inorganic semiconductors, because of their conductivity, excellent light response, good sorption ability, better redox charge generation, and separation along with a delocalized π-electrons system. The advances in photocatalytic removal/reduction of three primary air-polluting compounds such as CO₂, NO_X, and VOCs using CPs based photocatalysts are discussed in detail. Furthermore, the synergetic effects, obtained in CPs after combining with inorganic semiconductors are also comprehensively summarized in this review. However, such a combined system, on to better charges generation and separation, may make the Adsorb & Shuttle process into action, wherein, CPs may play the sorbing area. And, we hope that, the critical discussion on the further enhancement of photoactivity and future recommendations will open the doors for up-to-date technology transfer in modern research.

Progress and perspectives on 1D nanostructured catalysts applied in photo(electro)catalytic reduction of CO2

Reducing CO₂ into value-added chemicals and fuels by artificial photosynthesis (photocatalysis and photoelectrocatalysis) is one of the considerable solutions to global environmental and energy issues. One-dimensional (1D) nanostructured catalysts (nanowires, nanorods, nanotubes and so on.) have attracted extensive attention due to their superior light-harvesting ability, co-catalyst loading capacity, and high carrier separation rate. This review analyzed the basic principle of the photo(electro)catalytic CO₂ reduction reaction (CO₂ RR) briefly. The preparation methods and properties of 1D nanostructured catalysts are introduced. Next, the applications of 1D nanostructured catalysts in the field of photo(electro)catalytic CO₂ RR are introduced in detail. In particular, we introduced the design of composite catalysts with 1D nanostructures, for example loading 0D, 1D, 2D, and 3D materials on a 1D nanostructured semiconductor to construct a heterojunction to optimize the photo-response range, carrier separation and transport efficiency, CO₂ adsorption and activation capacity, and stability of the catalyst. Finally, the development prospects of 1D nanostructured catalysts are discussed and summarized. This review can provide guidance for the rational design of advanced catalysts for photo(electro)catalytic CO₂ RR.

Structured clay minerals-based nanomaterials for sustainable photo/thermal carbon dioxide conversion to cleaner fuels: A critical review

In efforts to achieve a sustainable development goal, the utilization of CO₂ to generate renewable fuels is promising, as it is a sustainable technology that provides affordable and clean energy. To realize the production of renewable green fuels, a proficient and low-cost technology is required. Using photo/thermal catalytic process, the goal of sustainable CO₂ hydrogenation can be achieved. There have been several types of catalysts under exploration, however, they are expensive with limited availability. In the current development, green materials such as mineral clays are emerging as cocatalyst/supports for CO₂ hydrogenation. Clays are bestowed with various beneficial properties such as a large surface area, high porosity, abundant basic sites, excellent thermal stability and chemical corrosion resistance. Clays are promising materials that can drastically reduce the cost in catalyst preparation, partially fulfil the energy demand and reduce greenhouse gas emission. This review aims to focus on the various types of clays and their applications in the field of photo/thermal CO₂ hydrogenation to renewable fuels. Firstly, the classifications of clays are provided, whereby they can be differentiated based on their silicate layers, namely 1:1 and 2:1 type clay and their properties are thoroughly discussed to provide advantages and applications. The applications of various clays such as kaolinite, halloysite, montmorillonite, attapulgite, saponite and volkonskoite for CO₂ hydrogenation reactions are systematically discoursed. In addition, various approaches to improve the capability of raw clays as catalyst support are critically discussed, which include thermal treatment, exfoliation, acid-leaching and pillaring approaches. A critical discussion regarding the engineering aspects to further enhance clay-based catalyst for CO₂ hydrogenation are further disclosed. In short, clays are freely available materials that can be found in abundance. However, there are many more different types of natural green clays that have not been studied and explored in various energy applications.

Construction of Spatially Separated Gold Nanocrystal/Cuprous Oxide Architecture for Plasmon-Driven CO2 Reduction

Plasmonic hot electrons have shown great potential in photocatalysis, but little is known about the hot hole-driven chemical reactions due to the lack of desired plasmonic metal/p-type semiconductor architectures. Herein, we describe a general and robust strategy for the site-selective growth of a p-type semiconductor, Cu₂O on Au nanocrystals (NCs), to produce diverse spatially separated Au/Cu₂O heterostructures. The preferential growth of Cu₂O on the tips/ends/edges of Au NCs is directed by the sparse coverage of the surfactant molecules at the high-curvature sites of Au NCs. The obtained dumbbell-shaped nanostructures serve as the ideal platforms for probing the hot-hole-mediated CO₂ reduction reaction. Benefiting from the hot-hole injection, a new reaction pathway is unlocked, and the C₂ product activity and selectivity are significantly improved. This study demonstrates the genuine superiority of the dumbbell-shaped nanostructures in photocatalysis, offering a new unique avenue to explore the underlying mechanism of hot-hole-mediated chemical reactions.

Insight on Reaction Pathways of Photocatalytic CO2 Conversion

Photocatalytic CO₂ conversion to value-added chemicals is a promising solution to mitigate the current energy and environmental issues but is a challenging process. The main obstacles include the inertness of CO₂ molecule, the sluggish multi-electron process, the unfavorable thermodynamics, and the selectivity control to preferable products. Furthermore, the lack of fundamental understanding of the reaction pathways accounts for the very moderate performance in the field. Therefore, in this Perspective, we attempt to discuss the possible reaction mechanisms toward all C₁ and C₂ value-added products, taking into account the experimental evidence and theoretical calculation on the surface adsorption, proton and electron transfer, and products desorption. Finally, the remaining challenges in the field, including mechanistic understanding, reactor design, economic consideration, and potential solutions, are critically discussed by us.

Understanding the Role of Copper Vacancies in Photoelectrochemical CO2 Reduction on Cuprous Oxide

Controlling the electronic and photoexcited properties of cuprous oxide (Cu₂O) through slight modifications of the synthesis method can impact a wide range of emerging technologies. Herein, we consider copper vacancies in Cu₂O as a prototype of a p-type oxide semiconductor for studying the impact of crystal and electronic structure on carbon dioxide photoreduction. Oriented films of copper vacancy modulated Cu₂O consisting of nano twin structures are electrodeposited by changing the potential in an aqueous alkaline copper(II)-lactate solution. The copper vacancies introduce tail states inside the band gap, improving the hole concentration and facilitating the charge separation and transfer in the Cu₂O photocathode. This study gives an in-depth view of how a cation-deficient structure regulates and promotes photoelectrochemical activity toward CO₂ reduction.

Pd Nanosheet-Decorated 2D/2D g-C3N4/WO3·H2O S-Scheme Photocatalyst for High Selective Photoreduction of CO2 to CO

The development of the global economy in recent years, environmental problems, greenhouse effect, and so forth have been of concern for countries all over the world. The key for solving the greenhouse effect is the reduction of CO₂. With the development of photocatalytic reduction of CO₂, hybrid photocatalytic nanostructures composed of noble metals and plasmonic semiconductors are being widely studied. In this work, S-scheme photocatalysts with a g-C₃N₄/WO₃·H₂O/Pd heterostructure was constructed by introducing ultrathin Pd nanosheets into the optimized 2D/2D g-C₃N₄/WO₃·H₂O binary system. The S-scheme charge transfer generated by the matched band gap of g-C₃N₄ and WO₃·H₂O can effectually improve the electron transfer rate and the redox ability of photogenerated carriers. The introduction of Pd nanosheets can inject a large number of hot electrons into the semiconductor on the basis of the S-scheme heterojunction to participate in the reaction. The S-scheme electron transfer method is used to improve the utilization rate of thermionic electrons and achieve the effect of widening the near-infrared-light absorption area of the composite material. Moreover, the reaction was carried out in water without the addition of any sacrificial agent, which can better reflect the green environmental protection of the experiment. This investigation will promote the broad-spectrum application of new and environment-friendly thermoelectron-assisted S-scheme photocatalysts, and on this basis, the possible reaction mechanism is discussed.

In-Situ Generated CsPbBr3 Nanocrystals on O-Defective WO3 for Photocatalytic CO2 Reduction

Metal halide perovskite (MHP) nanocrystals (NCs) have shown promising application in photocatalytic CO₂ reduction, but their activities are still largely restrained by severe charge recombination and narrow solar spectrum response. Assembly of heterojunctions can be beneficial to the charge separation in MHPs while the assembly process usually brings native interfacial defects, impeding efficient charge separation between two materials. Herein, an in-situ generation strategy was developed to prepare CsPbBr₃ /WO₃ heterojunction, using WO₃ nanosheets (NSs) as growing substrate for the growth of CsPbBr₃ NCs. The developed CsPbBr₃ /WO₃ heterojunction exhibited a high-quality interface, greatly facilitating charge transfer between two semiconductors. The hybrid photocatalyst displayed an excellent activity toward CO₂ reduction, which was about 7-fold higher than pristine CsPbBr₃ NCs and 3.5-fold higher than their assembled counterparts. The experimental results and theoretical simulations revealed that a Z-scheme mechanism with a favorable internal electric field was responsible for the good performance of CsPbBr₃ /WO₃ heterojunction. By using O-defective WO₃ NSs as a near-infrared (NIR) light absorber, the CsPbBr₃ /WO₃ heterojunction could harvest NIR light and showed an impressive activity toward CO₂ reduction. This work demonstrates a new strategy to design MHP-based heterojunctions by synergistically considering the interface quality, charge transfer mode, interfacial electric field, and light response range between two semiconductors.

Photoelectrochemical performance of ligand-free CsPb2Br5 perovskites

A pure aqueous synthesis strategy for ligand-free CsPb2Br5 nanoplatelets and pure-phase single crystal is reported. The CsPb2Br5 perovskite displays excellent photoelectrochemical activity in the absence of other electron acceptors.

Efficient mercury removal in chlorine-free flue gas by doping Cl into Cu2O nanocrystals

The low content of hydrogen chloride (HCl) in flue gas is difficult to meet the request of Hg⁰ removal. Here, a small amount of Cl was doped into the crystal lattice of Cu₂O nanocrystals (Cl-Cu₂O), presenting excellent Hg⁰ removal efficiency in chlorine-free coal combustion flue gas. SEM, XRD, BET, and XPS characterizations revealed well crystal morphology and structure of Cl-Cu₂O catalyst. Besides, Cl-Cu₂O had smaller sizes and higher BET surface area compared with Cu₂O. Hg⁰ removal behaviors were studied using a lab-scale fixed-bed reactor. After doping Cl, Hg⁰ removal efficiency was improved obviously and could reach nearly 100% above 150 ℃, indicating chlorine incorporated into the catalyst lattice had a better role for Hg⁰ removal. Besides, gas composition effect on Hg⁰ removal was analyzed. Cl-Cu₂O had high sulfur resistance capacity, and Hg⁰ removal efficiency can still reach above 90% even at 2000 ppm SO₂. O₂ played a critical role in the Hg⁰ removal reaction. Furthermore, a plausible mechanism for Hg⁰ removal was analyzed. Doping Cl into the lattice of Cu₂O nanocrystals was beneficial for the activation of molecular oxygen, and generated reactive oxygen species can further activate Cl to participate in the Hg⁰ removal reaction.

Active Sites and Interfacial Reducibility of CuxO/CeO2 Catalysts Induced by Reducing Media and O2/H2 Activation

The development of a highly efficient and stable catalyst for preferential oxidation of CO for the commercialization of proton-exchange membrane fuel cells has been a result of continuous effort. The main challenge is the simultaneous control of abundant active sites and interfacial reducibility over the catalyst Cu_xO/CeO₂. Here, we report a strategy to modulate porosity, active sites, and O-vacancy sites (O_V) by reducing media and O₂/H₂ activation. O₂-pretreated CeO₂-supported Cu catalysts unequivocally demonstrate the low-temperature activity owing to the excess concentrations of Cu⁺ and Cu²⁺ as well as the relative population of Ce³⁺ and O-vacancy sites at the surface. O₂ activation improves the Cu²⁺ diffusion into the CeO₂ lattice to generate the synergistic effect and induces the formation of electron-enriched Cu²⁺-O_V-Ce³⁺ sites, which accelerate the activation and dissociation of CO/O₂ and the formation of reactive oxygen species during catalysis. Density function theory (DFT) calculations reveal that CO adsorbs on Cu₂O {110} and CuO {111} with relatively optimal adsorption energy and longer C-Cu lengths in contrast to that on Cu {111}, favoring the adsorption and desorption of CO. These are crucial for ongoing CO oxidation, producing CO₂ by the Mars-van Krevelen mechanism.

Carbon-doped WO3 electrochemical aptasensor based on Box-Behnken strategy for highly-sensitive detection of tetracycline

Aptamer has been proved to be an important probe for antibiotic detection. Here, the electrical signal was doubly amplified by the synergistic effect of C-WO₃ and AuNPs. The probe structure has a specific recognition effect on tetracycline, which improves the selectivity and anti-interference of the sensor. With the assistance of BBD strategy, the experimental errors of the C-WO₃@AuNPs aptasensor were reduced and the best conditions for its preparation were obtained. This was conducive to obtain the best electrical signal transmission capacity of the electrode, greatly improved the sensor sensitivity. Under this mechanism, the antibiotic sensor achieved a low detection range (0.1 nM-100 nM) and a low detection limit (4.8 × 10^-2 nM). The sensor showed excellent selectivity even in the presence of coexisting pollutants. This work explored the mechanism of charge change and demonstrated the role of probes in antibiotic sensing, providing important prospects of future applications in electrochemical sensors.

Recent Advances in Metal-Organic Frameworks Derived Nanocomposites for Photocatalytic Applications in Energy and Environment

Solar energy is a key sustainable energy resource, and materials with optimal properties are essential for efficient solar energy-driven applications in photocatalysis. Metal-organic frameworks (MOFs) are excellent platforms to generate different nanocomposites comprising metals, oxides, chalcogenides, phosphides, or carbides embedded in porous carbon matrix. These MOF derived nanocomposites offer symbiosis of properties like high crystallinities, inherited morphologies, controllable dimensions, and tunable textural properties. Particularly, adjustable energy band positions achieved by in situ tailored self/external doping and controllable surface functionalities make these nanocomposites promising photocatalysts. Despite some progress in this field, fundamental questions remain to be addressed to further understand the relationship between the structures, properties, and photocatalytic performance of nanocomposites. In this review, different synthesis approaches including self-template and external-template methods to produce MOF derived nanocomposites with various dimensions (0D, 1D, 2D, or 3D), morphologies, chemical compositions, energy bandgaps, and surface functionalities are comprehensively summarized and analyzed. The state-of-the-art progress in the applications of MOF derived nanocomposites in photocatalytic water splitting for H2 generation, photodegradation of organic pollutants, and photocatalytic CO2 reduction are systemically reviewed. The relationships between the nanocomposite properties and their photocatalytic performance are highlighted, and the perspectives of MOF derived nanocomposites for photocatalytic applications are also discussed.

A facile strategy for synthesis of porous Cu2O nanospheres and application as nanozymes in colorimetric biosensing

Due to the unique advantages, developing a rapid, simple and economical synthetic strategy for porous nanomaterials is of great interest. In this work, for the first time, using sodium hypochlorite as a green oxidant, urea was oxidized to CO2 as a carbon source to prepare the fine-particle crosslinked Cu-precursors, which could be further reduced by sodium ascorbate into pure Cu2O nanospheres (NPs) with a porous morphology at room temperature. Interestingly, our study reveals that introduction of an appropriate amount of MgCl2 into the raw materials can tune the pore sizes and surface area, but has no influence on the phase purity of the resulting Cu2O NPs. Significantly, all the synthesized Cu2O NPs exhibited intrinsic peroxidase-like activity with higher affinity towards both 3,3,5,5-tetramethylbenzidine (TMB) and H2O2 than horseradish peroxidase (HRP) due to the highly porous morphology and the electrostatic attraction towards TMB. The colorimetric detection of glucose based on the resulting porous Cu2O NPs presented a limit of detection (LOD) of 2.19 μM with a broad linear range from 1-1000 μM, much better than many recently reported composite-based nanozymes. Meanwhile, this nanozyme system was utilized to detect l-cysteine, exhibiting a LOD value as low as 0.81 μM within a linear range from 0 to 10 μM. More interesting, this sensing system shows high sensitivity and excellent selectivity in determining glucose and l-cysteine, which is suitable for detecting serum samples with reliable results. Therefore, the present study not only develops a simple strategy to prepare Cu2O NPs with controllable porous structure, but also indicates its promising applications in bioscience and disease diagnosis.

Highly efficient and selective photoreduction of CO2 to CO with nanosheet g-C3N4 as compared with its bulk counterpart

Artificial photoreduction of CO₂ to clean energy utilizing the unlimited solar energy has shown promise to suppress the greenhouse effect and alleviate the energy shortage. In this study, a simple one-step calcination method was utilized to synthesize ultrathin nanosheet g-C₃N₄ (NS-g-C₃N₄). The prepared NS-g-C₃N₄ with a thickness of 10 nm was demonstrated to exhibited higher efficiency and selectivity than that of bulk counterpart (B-g-C₃N₄) for the photocatalytic reduction of CO₂ to CO under visible light irradiation. The yield of CO in the system with obtained NS-g-C₃N₄ was 5.8 times higher than that of B-g-C₃N₄. CO was measured to be the sole product detected in the system with NS-g-C₃N₄, while CO₂ can be reduced into CO, CH₄ and CH₃OH in the system with B-g-C₃N₄ under the same photocatalytic reduction conditions. The ultrathin nanostructures and abundant surface defect sites of NS-g-C₃N₄ could enhance the visible light adsorption efficiency, favor the separation and transfer of photogenerated carriers, and provide strong chemisorption sites for CO₂, and thus resulting in its remarkable photocatalytic activity to CO₂ reduction. More importantly, the surface defects of nanosheet could shift the adsorption mode of CO₂ from N-CO₂^- for the B-g-C₃N₄ to N-O-CO for NS-g-C₃N₄, and eventually contributing the selective photoreduction of CO₂ to CO. The obtained also NS-g-C₃N₄ exhibited excellent stability for CO₂ photoreduction. No significant change in the photoreduction efficiency of CO₂ in the system with NS-g-C₃N₄ was observed after four cycles. This study could not only provide a novel strategy to realize the high selectivity and efficiency photocatalytic conversion CO₂ to CO, but also aims to clarify the interactions between the adsorption model of CO₂ on g-C₃N₄ surface and the selectivity and efficiency of CO₂ photoreduction.

Construction of a Z-scheme heterojunction for high-efficiency visible-light-driven photocatalytic CO2 reduction

The continuous growth of fossil fuel consumption and large amounts of CO2 emissions have caused global energy crisis and climate change. The employment of semiconductor photocatalysts to convert CO2 into value-added products has attracted extensive attention and research worldwide in recent years. However, it is difficult for a single-component semiconductor photocatalyst to achieve this goal efficiently due to its drawbacks, such as low quantum efficiency, limited surface area, limited number of active sites, the short lifetime of photogenerated carriers, poor long-term stability, and the weak redox ability of carriers. Fortunately, inspired by photosynthesis, the construction of an artificial Z-scheme heterojunction has brought a new dawn for the realization of this goal. The Z-scheme heterojunction has a high separation efficiency of electron-hole pairs with strong redox ability and a wide light response range. The abovementioned advantages make the Z-scheme heterojunction provide a great opportunity for the conversion of CO2 to value-added chemicals. This review concisely reports the progress of the Z-scheme heterojunction in the field of photocatalytic CO2 reduction in recent years, photocatalytic mechanism, choice of oxidation and reduction systems, strategies for improving efficiency, confirmation of the Z-scheme charge transport mechanism, problems and challenges, and the prospects for the future.

Photoinduced In Situ Spontaneous Formation of a Reduced Graphene Oxide-Enwrapped Cu-Cu2O Nanocomposite for Solar Hydrogen Evolution

The fast recombination of photogenerated charge carriers and poor stability have impeded the application of many narrow band gap semiconductors with otherwise excellent photocatalytic performance. A metal-semiconductor Schottky junction is a promising strategy to accelerate charge separation and enhance catalytic efficiency. However, the preparation of these structures often involves intricate processes and harsh conditions, which will inevitably destroy the electronic structures of the semiconductors and ruin their original properties in practical applications. In this study, a reduced graphene oxide (RGO)-enwrapped Cu-Cu₂O nanocomposite (Cu-Cu₂O@RGO) spontaneously evolved from an aqueous alcoholic solution containing cupric ions and graphene oxide (GO) under simulated sunlight irradiation. During this process, GO reduction and Cu-Cu₂O nanoparticles growth occurred simultaneously in conjunction with in situ RGO encapsulation. Benefiting from the superior intrinsic semiconductor characteristic retention under mild reaction conditions, strong component interactions, and efficient interfacial charge transfer, the distinctive Cu-Cu₂O@RGO nanocomposite supplied multiple channels for rapid electron transfer to substantially enhance the charge carrier separation efficiency and provide perfect chemical protection to effectively prevent Cu₂O photocorrosion. This product also greatly suppressed self-aggregation to decrease the size of nanoparticles. Based on these merits, the Cu-Cu₂O@RGO nanocomposite offered promising advances in photoelectrochemical and photocatalytic H₂ evolution. This work provides an innovative photoinduced strategy for constructing an RGO-enwrapped semiconductor nanocomposite with efficient charge transfer interfaces while providing novel insights for the efficient solar energy utilization.

Encapsulation of Cobalt Oxide into Metal-Organic Frameworks for an Improved Photocatalytic CO2 Reduction

The increased emission of CO₂ has negative impacts on the environment. Among the strategies, photocatalytic reduction is promising to convert the CO₂ into chemicals. In this report, CoO_x nanoparticles were loaded in the channels of MIL-101(Cr), a kind of metal-organic frameworks (MOF), to construct a novel CoO_x /MIL-101(Cr) system to facilitate CO₂ photoreduction. Under the optimal conditions, the CoO_x /MIL-101(Cr) showed a significantly enhanced performance for photocatalytic CO₂ reduction compared with bare CoO_x and MIL-101(Cr). Our findings provide a pathway for a rational design of efficient MOF systems for the photocatalytic reduction of CO₂ .

ZIF-8 calcination derived Cu2O–ZnO* material for enhanced visible-light photocatalytic performance

The mechanism of TC degradation over Cu₂O–ZnO* rich in oxygen vacancies.

Carbon-Coated Tungsten Oxide Nanospheres Triggering Flexible Electron Transfer for Efficient Electrocatalytic Oxidation of Water and Glucose

Electrocatalytic oxidation of water (i.e., oxygen evolution reaction, OER) plays crucial roles in energy, environment, and biomedicine. It is a key factor affecting the efficiencies of electrocatalytic reactions conducted in aqueous solution, e.g., electrocatalytic water splitting and glucose oxidation reaction (GOR). However, electrocatalytic OER still suffers from problems like high overpotential, sluggish kinetics, and over-reliance on expensive noble-metal-based catalysts. Herein, 15 nm thick carbon-based shell coated tungsten oxide (CTO) nanospheres are loaded on nickel foam to form CTO/NF. An enhanced electrocatalytic OER is triggered on CTO/NF, with the overpotential at 50 mA cm^-2 (317 mV) and the Tafel slope (70 mV dec^-1) on CTO/NF lower than those on pure tungsten oxide (360 mV, 117 mV dec^-1) and noble-metal-based IrO₂ catalysts (328 mV, 96 mV dec^-1). A promoted electrocatalytic GOR is also achieved on CTO/NF, with efficiency as high as 189 μA mM^-1 cm^-2. The carbon-based shell on CTO is flexible for electron transfer between catalyst and reactants and provides catalytically active sites. This improves reactant adsorption and O-H bond dissociation on the catalyst, which are key steps in OER and GOR. The carbon-based shell on CTO retains the catalyst as nanospheres with a higher surface area, which facilitates OER and GOR. It is the multiple roles of the carbon-based shell that increases the electrocatalytic efficiency. These results are helpful for fabricating more efficient noble-metal-free electrocatalysts.

Photocatalytic CO2 conversion: What can we learn from conventional COx hydrogenation?

Solar-driven reduction of CO₂ into fuels/feedstocks is a promising strategy for addressing energy and CO₂ emission issues. Despite great research efforts, it still remains a grand challenge to achieve efficient and highly selective reduction of CO₂ owing to the large bond energy of CO₂ and the diversity of reduction products. In addition to the control of light harvesting and charge transfer like photocatalytic water splitting, the design of catalytically active sites is highly important to promote CO₂ reduction activity and selectivity (e.g., C-C coupling). In fact, we can learn a lot from conventional CO₂ hydrogenation and syngas conversion in terms of active site design. In this article, we demonstrate how to design catalytically active sites for efficient and highly selective photocatalytic reduction of CO₂ by sorting out the rules from the existing research on conventional CO_x hydrogenation, with a focus on enhancing C[double bond, length as m-dash]O activation and C-C coupling to form value-added products. This article aims to highlight the challenges in the field of photocatalytic CO₂ conversion and the connection of photocatalysis with conventional catalytic systems, providing the readers the opportunities to join the research.

Effect of bandgap alignment on the photoreduction of CO2 into methane based on Cu2O-decorated CuO microspheres

Semiconductors' band gap alignment is important for the photoreduction of CO2 to methane. In the paper, two kinds of Cu2O-decorated CuO microspheres composed with nanoflakes were prepared by using two different methods. Their electron behaviors were studied from the XPS spectra and photoelectrochemical measurements. Both samples are p-type CuO covered with an amount of Cu2O nanoparticles on their surface. Combined with their bandgaps and flat band potentials, CuO-Mic has a well-matched bandgap alignment between Cu2O and CuO, which is favorable for the separation of photogenerated electron-hole pairs. Those photogenerated carriers are beneficial for the conversion of CO2 to CH4, as an 8-electron process for the conversion of CO2 to CH4 will consume more photogenerated electrons for the chemical reactions than that of the 2-electron process for CO2 reduction to CO. Therefore, CuO-Mic has much better photocatalytic activity for CO2 reduction to CH4 with a CH4 yield ten times higher than that of CuO-Hyd under a visible light irradiation, the CO yields of the CO2 reduction are identical.

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution by Plasmonic Au/CdSe-Cu2 O Hierarchical Nanostructures under Visible Light

Here, the photocatalytic CO₂ reduction reaction (CO₂ RR) with the selectivity of carbon products up to 100% is realized by completely suppressing the H₂ evolution reaction under visible light (λ > 420 nm) irradiation. To target this, plasmonic Au/CdSe dumbbell nanorods enhance light harvesting and produce a plasmon-enhanced charge-rich environment; peripheral Cu₂ O provides rich active sites for CO₂ reduction and suppresses the hydrogen generation to improve the selectivity of carbon products. The middle CdSe serves as a bridge to transfer the photocharges. Based on synthesizing these Au/CdSe-Cu₂ O hierarchical nanostructures (HNSs), efficient photoinduced electron/hole (e^- /h⁺ ) separation and 100% of CO selectivity can be realized. Also, the 2e^- /2H⁺ products of CO can be further enhanced and hydrogenated to effectively complete 8e^- /8H⁺ reduction of CO₂ to methane (CH₄ ), where a sufficient CO concentration and the proton provided by H₂ O reduction are indispensable. Under the optimum condition, the Au/CdSe-Cu₂ O HNSs display high photocatalytic activity and stability, where the stable gas generation rates are 254 and 123 µmol g^-1 h^-1 for CO and CH₄ over a 60 h period.

Atomic-Scale Tuning of Graphene/Cubic SiC Schottky Junction for Stable Low-Bias Photoelectrochemical Solar-to-Fuel Conversion

Engineering tunable graphene-semiconductor interfaces while simultaneously preserving the superior properties of graphene is critical to graphene-based devices for electronic, optoelectronic, biomedical, and photoelectrochemical applications. Here, we demonstrate this challenge can be surmounted by constructing an interesting atomic Schottky junction via epitaxial growth of high-quality and uniform graphene on cubic SiC (3C-SiC). By tailoring the graphene layers, the junction structure described herein exhibits an atomic-scale tunable Schottky junction with an inherent built-in electric field, making it a perfect prototype to systematically comprehend interfacial electronic properties and transport mechanisms. As a proof-of-concept study, the atomic-scale-tuned Schottky junction is demonstrated to promote both the separation and transport of charge carriers in a typical photoelectrochemical system for solar-to-fuel conversion under low bias. Simultaneously, the as-grown monolayer graphene with an extremely high conductivity protects the surface of 3C-SiC from photocorrosion and energetically delivers charge carriers to the loaded cocatalyst, achieving a synergetic enhancement of the catalytic stability and efficiency.

Improving Artificial Photosynthesis over Carbon Nitride by Gas-Liquid-Solid Interface Management for Full Light-Induced CO2 Reduction to C1 and C2 Fuels and O2

The activity and selectivity of simple photocatalysts for CO2 reduction remain limited by the insufficient photophysics of the catalysts, as well as the low solubility and slow mass transport of gas molecules in/through aqueous solution. In this study, these limitations are overcome by constructing a triphasic photocatalytic system, in which polymeric carbon nitride (CN) is immobilized onto a hydrophobic substrate, and the photocatalytic reduction reaction occurs at a gas-liquid-solid (CO2 -water-catalyst) triple interface. CN anchored onto the surface of a hydrophobic substrate exhibits an approximately 7.2-fold enhancement in total CO2 conversion, with a rate of 415.50 μmol m-2  h-1 under simulated solar light irradiation. This value corresponds to an overall photosynthetic efficiency for full water-CO2 conversion of 0.33 %, which is very close to biological systems. A remarkable enhancement of direct C2 hydrocarbon production and a high CO2 conversion selectivity of 97.7 % are observed. Going from water oxidation to phosphate oxidation, the quantum yield is increased to 1.28 %.

Boosting C2 products in electrochemical CO2 reduction over highly dense copper nanoplates

Exclusive C2 selectivity of Cu-Nplates over C1 during electrocatalytic CO₂ reduction offers opportunities for large scale, long-term renewable energy storage and lessens carbon emissions.