Metadynamics-Biased ab Initio Molecular Dynamics Study of Heterogeneous CO2 Reduction via Surface Frustrated Lewis Pairs

CeO2-Based Frustrated Lewis Pairs via Defective Engineering: Formation Theory, Site Characterization, and Small Molecule Activation

Activation of small molecules is considered to be a central concern in the theoretical investigation of environment- and energy-related catalytic conversions. Sub-nanostructured frustrated Lewis pairs (FLPs) have been an emerging research hotspot in recent years due to their advantages in small molecule activation. Although the progress of catalytic applications of FLPs is increasingly reported, the fundamental theories related to the structural formation, site regulation, and catalytic mechanism of FLPs have not yet been fully developed. Given this, it is attempted to demonstrate the underlying theory of FLPs formation, corresponding regulation methods, and its activation mechanism on small molecules using CeO2 as the representative metal oxide. Specifically, this paper presents three fundamental principles for constructing FLPs on CeO2 surfaces, and feasible engineering methods for the regulation of FLPs sites are presented. Furthermore, cases where typical small molecules (e.g., hydrogen, carbon dioxide, methane oxygen, etc.) are activated over FLPs are analyzed. Meanwhile, corresponding future challenges for the development of FLPs-centered theory are presented. The insights presented in this paper may contribute to the theories of FLPs, which can potentially provide inspiration for the development of broader environment- and energy-related catalysis involving small molecule activation.

Coordination chemistry and FLP reactivity of 1,1- and 1,2-bis-boranes

Coordination chemistry and frustrated Lewis pair (FLP) chemistry have been most commonly studied using monodentate Lewis acids. In this paper, we examine the corresponding reactions employing the 1,1- and 1,2-bis-boranes, PhCH2CH(B(C6F5)2)21 and Me3SiCH(B(C6F5)2)CH2B(C6F5)22, respectively. Coordination of isocyanide to these species results in the formation of the products RCH(B(C6F5)2CNtBu)CH2(B(C6F5)2CNtBu) (R = Ph 3, Me3Si 4). The rearrangement of 1 to give the 1,2-bis-borane adduct 3 was probed and attributed to a donor-induced retrohydroboration and subsequent hydroboration. The analogous reaction of 1 is evident in efforts to use the Gutman-Beckett method to assess its Lewis acidity. However, in combination with tBu3P, bis-boranes 1 and 2 form FLPs and react with H2 to give [tBu3PH][PhCH2CH(B(C6F5)2)2(μ-H)] 5a and [tBu3PH][Me3SiCH(B(C6F5)2)CH2(B(C6F5)2)(μ-H)] 6, respectively. Reactions of 1 and 2 with various donors and PhCCH were shown to give deprotonation and addition products, depending on the nature of the base. However, in the case of 1, products resulting from retrohydroboration, and subsequent hydroboration are evident. Several of these alkyne products are crystallographically characterized.

Catalytic Ring-Opening Polymerisation of Cyclic Ethylene Carbonate: Importance of Elementary Steps for Determining Polymer Properties Revealed via DFT-MTD Simulations Validated Using Kinetic Measurements

The production of CO2-containing polymers is still very demanding in terms of controlling the synthesis of products with pre-defined CO2 content and molecular weight. An elegant way of synthesising these polymers is via CO2-containing building blocks, such as cyclic ethylene carbonate (cEC), via catalytic ring-opening polymerisation. However, to date, the mechanism of this reaction and control parameters have not been elucidated. In this work, using DFT-metadynamics simulations for exploiting the potential of the polymerisation process, we aim to shed more light on the mechanisms of the interaction between catalysts (in particular, the catalysts K3VO4, K3PO4, and Na2SnO3) and the cEC monomer in the propagation step of the polymeric chain and the occurring CO2 release. Confirming the simulation results via subsequent kinetics measurements indicates that, depending on the catalyst's characteristics, it can be attached reversibly to the polymeric chain during polymerisation, resulting in a defined lifetime of the activated polymer chain. The second anionic oxygen of the catalyst can promote the catalyst's transfer to another electrophilic cEC monomer, terminating the growth of the first chain and initiating the propagation of the new polymer chain. This transfer reaction is an essential step in controlling the molecular weight of the products.

Characteristics of the Frustrated Lewis Pairs (FLPs) on the Surface of Albite and the Corresponding Mechanism of H2 Activation

The characteristics of frustrated Lewis pairs (FLPs) on albite surfaces were analyzed with density functional theory, and the reaction mechanism for H2 activation by the FLPs was studied. The results show that albite is an ideal substrate material with FLPs, and its (001) and (010) surfaces have the typical characteristics of FLPs. In the case of H2 activation, the interaction between the HOMO of H2 and the SOMO of the Lewis base and the electron acceptance characteristics of the Lewis acid are the key factors. In fact, the activation energy of H2 is the required activation energy from the ground state to the excited state, and once the excited state is produced, the dissociative adsorption of H2 will occur directly. This study provides a new ideas and a reference for research on the construction of novel solid FLPs catalysts using ultramicro channel materials.

First principles insights into the interaction mechanism of iron doped thermally activated kaolinite with Cd and Pb pollutants in organic solid waste incineration flue gas

Incineration of organic solid wastes is accompanied by the heavy metal emission through flue gas. As an inexpensive and efficient heavy metal adsorbent, the improvement of kaolinite adsorption performance for heavy metals has drawn widespread interests. In this work, the interaction mechanisms between various kaolinite surfaces and Cd/Pb species are explored through first principles calculations. The results show that the combination of Fe doping and dehydroxylation enhances the activity of kaolinite surfaces, analysis of adsorption configurations reveal that both Cd and Pb species are immobilized through chemisorption on the -H + Fe surface. At the microscopic level, further electronic structure analysis shows that the composite modified kaolinite surface has more electron transfer and more pronounced orbital hybridization and overlap compared to the original kaolinite surface, demonstrating that the modification means of dehydroxylation and Fe doping indeed enhanced the activity of the kaolinite surface, especially the activity of the O atoms in the vicinity of the Fe atom and that the O atoms are more efficiently bonded as ionic connecting Cd/Pb species for the purpose of trapping Cd/Pb species. This study points out the research direction and provides basic theoretical support for the development of new kaolinite adsorbents in the future.

A DFT-metadynamics study disclosing key properties of ring-opening polymerization catalysts to produce polyethercarbonate polyols from cyclic ethylene carbonate as part of an emerging CCU technology

The ring opening polymerization of cyclic carbonates made from epoxide and CO₂ to CO₂-containing polymers constitutes an emerging technology of particular industrial interest. Considering the reaction of ring-opening polymerization of cyclic ethylene carbonate to produce polyethercarbonate polyols, several types of catalysts were tested experimentally and mechanistic pathways were proposed, but a detailed analysis of structure property relationship including the CO₂-liberation pathways is still lacking. This contribution is using computational methods to investigate reported benchmark catalysts with the lead structure A_xM_yO_z (A: alkali metal or alkyl, M: main group element or transition metal) that are particularly approved as effiecient catalysts for industrial purpose. Employing DFT-metadynamics simulations, free energy surfaces (FESs) for the key-steps in the catalytic polymerization of cyclic ethylene carbonate (cEC) are generated. Important structural criteria and characteristics of the catalysts that influence the catalytic performance and (side)reaction pathways are determined. It turns out that less nucleophilicity of the catalyst anion and more labile cations remain major criteria for prohibiting CO₂ liberation during polymerization. The key learnings of this contribution currently serve as a basis to develop the next generation of catalysts to bring this emerging carbon capture and use (CCU) technology into industrial application.

Frustrated Lewis Pairs: Bonding, Reactivity, and Applications

The outstanding capability of Frustrated Lewis Pair (FLP) catalysts to activate small molecules has gained significant attention in recent times. Reactivity of FLP is further extended toward the hydrogenation of various unsaturated species. Over the past decade, this unique catalysis concept has been successfully expanded to heterogeneous catalysis as well. The present review article gives a brief survey on several studies on this field. A thorough discussion on quantum chemical studies concerning the activation of H₂ is provided. The role of aromaticity and boron-ligand cooperation on the reactivity of FLP is discussed in the Review. How FLP can activate other small molecules by cooperative action of its Lewis centers is also discussed. Further, the discussion is shifted to the hydrogenation of various unsaturated species and the mechanism regarding this process. It also discusses the latest theoretical advancements in the application of FLP in heterogeneous catalysis across various domains, such as two-dimensional materials, functionalized surfaces, and metal oxides. A deeper understanding of the catalytic process may assist in devising new heterogeneous FLP catalysts through experimental design.

Elucidating CO2 Hydrogenation over In2 O3 Nanoparticles using Operando UV/Vis and Impedance Spectroscopies

In₂ O₃ has emerged as a promising catalyst for CO₂ activation, but a fundamental understanding of its mode of operation in CO₂ hydrogenation is still missing, as the application of operando vibrational spectroscopy is challenging due to absorption effects. In this mechanistic study, we systematically address the redox processes related to the reverse water-gas shift reaction (rWGSR) over In₂ O₃ nanoparticles, both at the surface and in the bulk. Based on temperature-dependent operando UV/Vis spectra and a novel operando impedance approach for thermal powder catalysts, we propose oxidation by CO₂ as the rate-determining step for the rWGSR. The results are consistent with redox processes, whereby hydrogen-containing surface species are shown to exhibit a promoting effect. Our findings demonstrate that oxygen/hydrogen dynamics, in addition to surface processes, are important for the activity, which is expected to be of relevance not only for In₂ O₃ but also for other reducible oxide catalysts.

Reactions of Diethylazo-Dicarboxylate with Frustrated Lewis Pairs

Reactions of PAr₃ /B(C₆ F₅ )₃ (Ar=o-Tol, Mes, Ph) FLPs with diethyl azodicarboxylate (DEAD) afford the corresponding FLP addition products 1-3 in which P-N and B-O linkages are formed. In contrast, the reaction of BPh₃ , PPh₃ and DEAD gave product 4 where P-N and N-B linkages were confirmed. In all cases, other binding modes were computed to be both higher in energy and readily distinguishable by ³¹ P and ¹¹ B NMR parameters. These data illustrate the influence of steric demands and electronic structures on the nature of the products of FLP reactions with DEAD.

Frustrated Lewis Pairs in Heterogeneous Catalysis: Theoretical Insights

Frustrated Lewis pair (FLP) catalysts have attracted much recent interest because of their exceptional ability to activate small molecules in homogeneous catalysis. In the past ten years, this unique catalysis concept has been extended to heterogeneous catalysis, with much success. Herein, we review the recent theoretical advances in understanding FLP-based heterogeneous catalysis in several applications, including metal oxides, functionalized surfaces, and two-dimensional materials. A better understanding of the details of the catalytic mechanism can help in the experimental design of novel heterogeneous FLP catalysts.

Solid surface frustrated Lewis pair constructed on layered AlOOH for hydrogenation reaction

Designing heterogeneous solid surface frustrated Lewis pair (ssFLP) catalyst for hydrogenation is a new challenge in catalysis and no research has been reported on the construction of ssFLP on boehmite (AlOOH) surfaces up to now as far as we know. Herein, AlOOH with a layer structure is prepared and it is found that the Lewis basic O_Hv site (one H removed from OH) and an adjacent Lewis acidic unsaturated Al site (Al³⁺_unsatur.) proximal to a surface OH_v (OH vacancy) on AlOOH layers could form the ssFLP. The layered structure of AlOOH and its abundant OH defects over the surface result in a high concentration of O_Hv/Al³⁺_unsatur. FLPs, which are conducive to highly efficient hydrogen activation for hydrogenation of olefins and alkynes with low H-H bond dissociates activation energy of 0.16 eV under mild conditions (T = 80°C and P(H₂) = 2.0 MPa). This work develops a new kind of hydrogenation catalyst and provides a new perspective for creating solid surface FLP.

Designing heterogeneous solid surface frustrated Lewis pair (ssFLP) catalyst for hydrogenation is a new challenge in catalysis. Here, the authors show the ssFLP can be constructed on layered AlOOH for hydrogenation reactions under mild conditions.

Ab initio metadynamics determination of temperature-dependent free-energy landscape in ultrasmall silver clusters

Ab initio metadynamics enables extracting free-energy landscapes having the accuracy of first principles electronic structure methods. We introduce an interface between the PLUMED code that computes free-energy landscapes andenhanced-sampling algorithms and the ASE module, which includes several ab initio electronic structure codes. The interface is validated with a Lennard-Jones cluster free-energy landscape calculation by averaging multiple short metadynamics trajectories. We use this interface and analysis to estimate the free-energy landscape of Ag5 and Ag6 clusters at 10, 100 and 300 K with the radius of gyration and coordination number as collective variables, finding at most tens of meV in error. Relative free-energy differences between the planar and non-planar isomers of both clusters decrease with temperature, in agreement with previously proposed stabilization of non-planar isomers. Interestingly, we find that Ag6 is the smallest silver cluster where entropic effects at room temperature boost the non planar isomer probability to a competing state. The new ASE-PLUMED interface enables simulating nanosystem electronic properties at more realistic temperature-dependent conditions.

Strained and Reactive Donor/Acceptor-Supported Metallasilanone

A novel stable donor/acceptor-supported Mn^I -metallasilanone 3 was synthesized. The intramolecular silanone-Mn^I interaction induces a highly strained three-membered cyclic structure, leading to an exceptionally high reactivity of 3 as a donor/acceptor complex of silanone. Indeed, metallasilanone 3 readily reacts with various small molecules such as H₂ or ethylene gas in mild conditions.

Induced Active Sites by Adsorbate in Zeotype Materials

There has been a long debate on how and where active sites are created for molecular adsorption and catalysis in zeolites, which underpin many important industrial applications. It is well accepted that Lewis acidic sites (LASs) and basic sites (LBSs) as active sites in pristine zeolites are generally believed to be the extra-framework Al species and residue anion (OH^-) species formed at fixed crystallographic positions after their synthesis. However, the dynamic interactions of adsorbates/reactants with pristine zeotype materials to "create" sites during real conditions remain largely unexplored. Herein, direct experimental observation of the establishment of induced active sites in silicoaluminophosphate (SAPO) by an adsorbate is for the first time made, which contradicts the traditional view of the fixed active sites in zeotype materials. Evidence shows that an induced frustrated Lewis pair (FLP, three-coordinated framework Al as LAS and SiO (H) as LBS) can be transiently favored for heterolytic molecular binding/reactions of competitive polar adsorbates due to their ineffective orbital overlap in the rigid framework. High-resolution magic-angle-spinning solid-state NMR, synchrotron X-ray diffraction, neutron powder diffraction, in situ diffuse reflectance infrared Fourier transform spectroscopy, and ab initio molecular dynamics demonstrate the transformation of a typical Brønsted acid site (Al(OH)Si) in SAPO zeolites to new induced FLP structure for hetereolytic binding upon adsorption of a strong polar adsorbate. Our unprecedented finding opens up a new avenue to understanding the dynamic establishment of active sites for adsorption or chemical reactions under molecular bombardment of zeolitic structures.

Perspective on computational reaction prediction using machine learning methods in heterogeneous catalysis

Heterogeneous catalysis plays a significant role in the modern chemical industry. Towards the rational design of novel catalysts, understanding reactions over surfaces is the most essential aspect. Typical industrial catalytic processes such as syngas conversion and methane utilisation can generate a large reaction network comprising thousands of intermediates and reaction pairs. This complexity not only arises from the permutation of transformations between species but also from the extra reaction channels offered by distinct surface sites. Despite the success in investigating surface reactions at the atomic scale, the huge computational expense of ab initio methods hinders the exploration of such complicated reaction networks. With the proliferation of catalysis studies, machine learning as an emerging tool can take advantage of the accumulated reaction data to emulate the output of ab initio methods towards swift reaction prediction. Here, we briefly summarise the conventional workflow of reaction prediction, including reaction network generation, ab initio thermodynamics and microkinetic modelling. An overview of the frequently used regression models in machine learning is presented. As a promising alternative to full ab initio calculations, machine learning interatomic potentials are highlighted. Furthermore, we survey applications assisted by these methods for accelerating reaction prediction, exploring reaction networks, and computational catalyst design. Finally, we envisage future directions in computationally investigating reactions and implementing machine learning algorithms in heterogeneous catalysis.

Promotional effect of indium on Cu/SiO2 catalysts for the hydrogenation of dimethyl oxalate to ethylene glycol

CuIn/SiO2 with 1.0 wt% indium shows the best catalytic performance for DMO hydrogenation to EG. The synergistic effect of Cu0–Cu+–CuIn alloy in activating H2 molecules and carbonyl bonds is elucidated.

Heterolytic cleavage of dihydrogen (HCD) in metal nanoparticle catalysis

Supports, ligands and additives can promote heterolytic H₂ splitting by a cooperative mechanism with metal nanoparticles.

Methanol as a Hydrogen Carrier: Kinetic and Thermodynamic Drivers for its CO2 -Based Synthesis and Reforming over Heterogeneous Catalysts

Methanol is an attractive energy vector in a closed loop including its synthesis from CO₂ and H₂ and on-demand reforming to the starting feedstocks. Catalytic materials for the two reactions were mostly studied separately, with very few works assessing the feasibility of the same system for both. Here, key kinetic drivers of methanol synthesis (MS) and methanol steam reforming (MSR) were identified for the main catalyst families, with special focus on Cu-ZnO-Al₂ O₃ , In₂ O₃ , and Pd/ZrO₂ . It was shown that the relative activity level was preserved in either direction, whereas the distinctly favored (reverse) water-gas shift modulated selectivity differently. Low selectivity in kinetically controlled MS could be overcome in MSR by exploiting thermodynamics as the driving force, with many catalysts unfit for MS still comprising appealing candidates for MSR and only few being suited for MS as well as MSR. Overall, readily identifiable properties describing catalyst behavior in the forward and backward reactions were highlighted, effectively linking research in the two fields and setting a stronger basis for developing a methanol-based hydrogen storage unit with a single reactor.

Recent Advances in Supported Metal Catalysts and Oxide Catalysts for the Reverse Water-Gas Shift Reaction

The reverse water-gas shift reaction (RWGSR), a crucial stage in the conversion of abundant CO2 into chemicals or hydrocarbon fuels, has attracted extensive attention as a renewable system to synthesize fuels by non-traditional routes. There have been persistent efforts to synthesize catalysts for industrial applications, with attention given to the catalytic activity, CO selectivity, and thermal stability. In this review, we describe the thermodynamics, kinetics, and atomic-level mechanisms of the RWGSR in relation to efficient RWGSR catalysts consisting of supported catalysts and oxide catalysts. In addition, we rationally classify, summarize, and analyze the effects of physicochemical properties, such as the morphologies, compositions, promoting abilities, and presence of strong metal-support interactions (SMSI), on the catalytic performance and CO selectivity in the RWGSR over supported catalysts. Regarding oxide catalysts (i.e., pure oxides, spinel, solid solution, and perovskite-type oxides), we emphasize the relationships among their surface structure, oxygen storage capacity (OSC), and catalytic performance in the RWGSR. Furthermore, the abilities of perovskite-type oxides to enhance the RWGSR with chemical looping cycles (RWGSR-CL) are systematically illustrated. These systematic introductions shed light on development of catalysts with high performance in RWGSR.

Recent advances in engineering active sites for photocatalytic CO2 reduction

The photocatalytic conversion of green-house gas CO₂ into high value-added carbonaceous fuels and chemicals through harvesting solar energy is a great promising strategy for simultaneously tackling global environmental issues and the energy crisis. Considering the vital role of active sites in determining the activity and selectivity in photocatalytic CO₂ reduction reactions, great efforts have been directed toward engineering active sites for fabricating efficient photocatalysts. This review highlights recent advances in the strategies for engineering active sites on surfaces and in open frameworks toward photocatalytic CO₂ reduction, referring to surface vacancies, doped heteroatoms, functional groups, loaded metal nanoparticles, crystal facets, heterogeneous/homogeneous single-site catalysts and metal nodes/organic linkers in metal organic frameworks.

Alternative Pathway of CO2 Hydrogenation by Lewis-Pair-Functionalized UiO-66 MOF Revealed by Metadynamics Simulations

The reaction between H₂ and CO₂ catalyzed by an intramolecular frustrated Lewis pair, which is covalently bonded to a UiO-66 metal-organic framework (MOF), is considered in this work. Free energy surfaces (FESs) for this reaction are generated throughout finite-temperature density functional theory (DFT) metadynamics (MD) simulations. The simulated FESs indicate an alternative stepwise pathway for the hydrogenation of CO₂. Furthermore, indications of weaker binding of CO₂ than H₂ to the Lewis pair centers have been observed via metadynamics simulations. These findings were unknown from the results of static-DFT calculations, which proposed a concerted reduction of CO₂. The results of the present work may influence the design of new efficient heterogeneous Lewis pair (LP)-functionalized MOFs to catalyze capture and conversion of CO₂ to high-value chemicals.

Shining light on CO2: from materials discovery to photocatalyst, photoreactor and process engineering

Materials engineering, theoretical modelling, reactor engineering and process development of gas-phase photocatalytic CO₂ reduction exemplified by indium oxide systems.

Ab initio metadynamics calculations of dimethylamine for probing pKb variations in bulk vs. surface environments

Free energy landscape obtained from ab initio metadynamics calculations for dimethylamine protonation at the air–water interface.

Towards operando computational modeling in heterogeneous catalysis

An increased synergy between experimental and theoretical investigations in heterogeneous catalysis has become apparent during the last decade. Experimental work has extended from ultra-high vacuum and low temperature towards operando conditions. These developments have motivated the computational community to move from standard descriptive computational models, based on inspection of the potential energy surface at 0 K and low reactant concentrations (0 K/UHV model), to more realistic conditions. The transition from 0 K/UHV to operando models has been backed by significant developments in computer hardware and software over the past few decades. New methodological developments, designed to overcome part of the gap between 0 K/UHV and operando conditions, include (i) global optimization techniques, (ii) ab initio constrained thermodynamics, (iii) biased molecular dynamics, (iv) microkinetic models of reaction networks and (v) machine learning approaches. The importance of the transition is highlighted by discussing how the molecular level picture of catalytic sites and the associated reaction mechanisms changes when the chemical environment, pressure and temperature effects are correctly accounted for in molecular simulations. It is the purpose of this review to discuss each method on an equal footing, and to draw connections between methods, particularly where they may be applied in combination.

Tailoring Surface Frustrated Lewis Pairs of In2O3-x (OH)y for Gas-Phase Heterogeneous Photocatalytic Reduction of CO2 by Isomorphous Substitution of In3+ with Bi3

Frustrated Lewis pairs (FLPs) created by sterically hindered Lewis acids and Lewis bases have shown their capacity for capturing and reacting with a variety of small molecules, including H2 and CO2, and thereby creating a new strategy for CO2 reduction. Here, the photocatalytic CO2 reduction behavior of defect-laden indium oxide (In2O3-x (OH) y ) is greatly enhanced through isomorphous substitution of In3+ with Bi3+, providing fundamental insights into the catalytically active surface FLPs (i.e., In-OH···In) and the experimentally observed "volcano" relationship between the CO production rate and Bi3+ substitution level. According to density functional theory calculations at the optimal Bi3+ substitution level, the 6s2 electron pair of Bi3+ hybridizes with the oxygen in the neighboring In-OH Lewis base site, leading to mildly increased Lewis basicity without influencing the Lewis acidity of the nearby In Lewis acid site. Meanwhile, Bi3+ can act as an extra acid site, serving to maximize the heterolytic splitting of reactant H2, and results in a more hydridic hydride for more efficient CO2 reduction. This study demonstrates that isomorphous substitution can effectively optimize the reactivity of surface catalytic active sites in addition to influencing optoelectronic properties, affording a better understanding of the photocatalytic CO2 reduction mechanism.

Semi-solid and solid frustrated Lewis pair catalysts

This review presents the strategies for the construction of heterogeneous frustrated-Lewis-pair catalysts, their catalytic applications and future challenges and opportunities.

Combining catalysis and computational fluid dynamics towards improved process design for ethanol dehydration

Combining computational fluid dynamics with catalysis gives significant insights into reactor design for sustainable solid acid catalysed processes.

Halogenated triphenylgallium and -indium in frustrated Lewis pair activations and hydrogenation catalysis

The Lewis acids Ga(C₆F₅)₃, In(C₆F₅)₃ and Ga(C₆Cl₅)₃ are prepared and their Lewis acidity has been probed experimentally and computationally. The species Ga(C₆F₅)₃ and In(C₆F₅)₃ in conjunction with phosphine donors are shown to heterolytically split H₂ and catalyse the hydrogenation of an imine. In addition, frustrated Lewis pairs (FLPs) derived from Ga(C₆F₅)₃ and In(C₆F₅)₃ and phosphines react with diphenyldisulfide to phosphoniumgallates or indates of the form [tBu₃PSPh][PhSE(C₆F₅)₃] and [tBu₃PSPh][(μ-SPh)(E(C₆F₅)₃)₂] (E = Ga, In). The potential of the FLPs based on Ga(C₆F₅)₃, In(C₆F₅)₃ and Ga(C₆Cl₅)₃ and phosphines is also shown in reactions with phenylacetylene to give pure or mixtures of the products [tBu₃PH][PhCCE(C₆X₅)₃] and R₃P(Ph)C=C(H)E(C₆X₅)₃ A number of these species are crystallographically characterized. The implications for the use of these species in FLP chemistry are considered.This article is part of the themed issue 'Frustrated Lewis pair chemistry'.

Solid frustrated-Lewis-pair catalysts constructed by regulations on surface defects of porous nanorods of CeO2

Identification on catalytic sites of heterogeneous catalysts at atomic level is important to understand catalytic mechanism. Surface engineering on defects of metal oxides can construct new active sites and regulate catalytic activity and selectivity. Here we outline the strategy by controlling surface defects of nanoceria to create the solid frustrated Lewis pair (FLP) metal oxide for efficient hydrogenation of alkenes and alkynes. Porous nanorods of ceria (PN-CeO₂) with a high concentration of surface defects construct new Lewis acidic sites by two adjacent surface Ce³⁺. The neighbouring surface lattice oxygen as Lewis base and constructed Lewis acid create solid FLP site due to the rigid lattice of ceria, which can easily dissociate H–H bond with low activation energy of 0.17 eV.

Surface engineering of catalysts allows the tailoring of active sites. Here the authors produce a heterogeneous nanoceria catalyst with engineered defects producing active solid frustrated Lewis pair sites, and use these materials for the hydrogenation of alkynes and alkenes.

Heterogeneous catalytic hydrogenation of CO2by metal oxides: defect engineering – perfecting imperfection

In this review, we discuss how metal oxides with designed defects can be synthesized and engineered, to enable heterogeneous catalytic hydrogenation of gaseous carbon dioxide to chemicals and fuels.