Deoxydehydration with Molecular Hydrogen over Ceria-Supported Rhenium Catalyst with Gold Promoter

Lattice oxygen insertion mechanism in CeO2-catalyzed reactions in water: nitrile hydration reaction

Cerium oxide (CeO2) exhibits prominent catalytic activity in various organic reactions owing to its unique acid-base and redox properties. One of the most interesting applications of pure CeO2-catalyzed organic reactions is the hydration of nitriles in water. The experimental results showed that the hydration of 2-cyanopyridine to picolinamide in water using CeO2 catalysts proceeds readily at low temperatures (30-100 °C) in high yields and that this reaction occurs exclusively on CeO2 among various metal-oxide catalysts. To elucidate the unique catalytic activity of CeO2, the reaction mechanism is dissected using the density functional theory-based molecular dynamics (DFT-MD) simulations. Based on the free energy analysis, it is demonstrated that the reaction proceeds with the involvement of the surface lattice oxygen, where the lattice oxygen atom is inserted into picolinamide. The involvement of the surface lattice oxygen is notably uncommon given the low temperatures of the reaction, and this computational prediction is verified by the two experiments using H2 18O solvent and 18O-exchanged CeO2 catalyst, where the introduction of surface lattice oxygen into picolinamide is confirmed. The inherent flexibility of the surface lattice oxygen and the unique acid-base properties of CeO2, which can favorably bind and activate both nitrile and water molecules, are key factors in the high reactivity for various organic reactions, which characterizes the outstanding catalytic activity of CeO2.

Simple Halogen-Free, Biobased Organic Salts Convert Glycidol to Glycerol Carbonate under Atmospheric CO2 Pressure

Glycerol carbonate (GC) has emerged as an attractive synthetic target due to various promising technological applications. Among several viable strategies to produce GC from CO₂ and glycerol and its derivatives, the cycloaddition of CO₂ to glycidol represents an atom-economic an efficient strategy that can proceed via a halide-free manifold through a proton-shuttling mechanism. Here, it was shown that the synthesis of GC can be promoted by bio-based and readily available organic salts leading to quantitative GC formation under atmospheric CO₂ pressure and moderate temperatures. Comparative and mechanistic experiments using sodium citrate as the most efficient catalyst highlighted the role of both hydrogen bond donor and weakly basic sites in the organic salt towards GC formation. The citrate salt was also used as a catalyst for the conversion of other epoxy alcohols. Importantly, the discovery that homogeneous organic salts catalyze the target reaction inspired us to use metal alginates as heterogeneous and recoverable bio-based catalysts for the same process.

Strengthening the Connection between Science, Society and Environment to Develop Future French and European Bioeconomies: Cutting-Edge Research of VAALBIO Team at UCCS

The development of the future French and European bioeconomies will involve developing new green chemical processes in which catalytic transformations are key. The VAALBIO team (valorization of alkanes and biomass) of the UCCS laboratory (Unité de Catalyse et Chimie du Solide) are working on various catalytic processes, either developing new catalysts and/or designing the whole catalytic processes. Our research is focused on both the fundamental and applied aspects of the processes. Through this review paper, we demonstrate the main topics developed by our team focusing mostly on oxygen- and hydrogen-related processes as well as on green hydrogen production and hybrid catalysis. The social impacts of the bioeconomy are also discussed applying the concept of the institutional compass.

Deoxydehydration of Biomass-Derived Polyols Over Silver-Modified Ceria-Supported Rhenium Catalyst with Molecular Hydrogen

Olefin production from polyols via deoxydehydration (DODH) was carried out over Ag-modified CeO₂ -supported heterogeneous Re catalysts with H₂ as a reducing agent. Both high DODH activity and low hydrogenation ability for C=C bonds were observed in the reaction of erythritol, giving a 1,3-butadiene yield of up to 90 % under "solvent-free" conditions. This catalyst is applicable to other substrates such as methyl glycosides (methyl α-fucopyranoside: 91 % yield of DODH product; methyl β-ribofuranoside: 88 % yield), which were difficult to be converted to the DODH products over the DODH catalysts reported previously. ReO_x -Ag/CeO₂ was reused 3 times without a decrease of activity or selectivity after calcination as regeneration. Although the transmission electron microscopy energy-dispersive X-ray spectroscopy and X-ray absorption fine structure analyses showed that Re species were highly dispersed and Ag was present as metal particles with various sizes from well-dispersed species (<1 nm) to around 5 nm particles, the catalysts prepared from size-controlled Ag nanoparticles showed similar performance, indicating that the catalytic performance is insensitive to the Ag particle size.

Titania-supported molybdenum oxide combined with Au nanoparticles as hydrogen-driven deoxydehydration catalyst of diol compounds

A heterogenous catalyst for deoxydehydration (DODH) reaction was developed using less expensive Mo than Re as the active center. Combination of Mo with anatase-rich TiO2 and Au as the support...

Transition metal-catalyzed deoxydehydration: missing pieces of the puzzle

Deoxydehydration (DODH) is a transformation that converts a vicinal diol into an olefin with the help of a sacrificial reductant.

Selective Hydrogenolysis of Erythritol over Ir-ReOx /Rutile-TiO2 Catalyst

Partial hydrogenolysis of erythritol, which can be produced at large scale by fermentation, to 1,4-butanediol (1,4-BuD) is investigated with Ir-ReO_x /SiO₂ and Ir-ReO_x /rutile-TiO₂ catalysts. In addition to the higher conversion rate over Ir-ReO_x /TiO₂ than over Ir-ReO_x /SiO₂ , which has been also reported for glycerol hydrogenolysis, Ir-ReO_x /TiO₂ showed higher selectivity to 1,4-BuD than Ir-ReO_x /SiO₂ , especially at low conversion levels, leading to high 1,4-BuD productivity of 20 mmol_1,4-BuD  g_Ir ^-1  h^-1 at 373 K (36 % conversion, 33 % selectivity). The productivity based on the noble metal amount is higher than those reported previously, although the maximum yield of 1,4-BuD (23 %) is not higher than the highest reported values. The reactions of various triols, diols and mono-ols are tested and the selectivity and the reaction rates are compared between catalysts and between substrates. The Ir-ReO_x /TiO₂ catalyst showed about twofold higher activity than Ir-ReO_x /SiO₂ in hydrogenolysis of the C-OH bond at the 2- or 3-positions in 1,2- and 1,3-diols, respectively, whereas the hydrogenolysis of C-OH at the 1-position is less promoted by the TiO₂ support. Lowering the loading amount of Ir on TiO₂ (from 4 wt % to 2 or 1 wt %) decreases the Ir-based activity and 1,4-BuD selectivity. Similarly, increasing the loading amount on SiO₂ from 4 wt % to 20 wt % increases the Ir-based activity and 1,4-BuD selectivity, although they remain lower than those for TiO₂ -supported catalyst with 4 wt % Ir. High metal loadings on the support seem to be important.

H2 -Free Re-Based Catalytic Dehydroxylation of Aldaric Acid to Muconic and Adipic Acid Esters

As one of the most demanded dicarboxylic acids, adipic acid can be directly produced from renewable sources. Hexoses from (hemi)cellulose are oxidized to aldaric acids and subsequently catalytically dehydroxylated. Hitherto performed homogeneously, we present the first heterogeneous catalytic process for converting an aldaric acid into muconic and adipic acid. The contribution of leached Re from the solid pre-reduced catalyst was also investigated with hot-filtration test and found to be inactive for dehydroxylation. Corrosive or hazardous (HBr/H2 ) reagents are avoided and simple alcohols and solid Re/C catalysts in an inert atmosphere are used. At 120 °C, the carboxylic groups are protected by esterification, which prevents lactonization in the absence of water or acidic sites. Dehydroxylation and partial hydrogenation yield monohexenoates (93 %). For complete hydrogenation to adipate, a 16 % higher activation barrier necessitates higher temperatures.

Hydro(deoxygenation) Reaction Network of Lignocellulosic Oxygenates

Hydrodeoxygenation (HDO) is a key transformation step to convert lignocellulosic oxygenates into drop-in and functional high-value hydrocarbons through controlled oxygen removal. Nevertheless, the mechanistic insights of HDO chemistry have been scarcely investigated as opposed to a significant extent of hydrodesulfurization chemistry. Current requirements emphasize certain underexplored events of HDO of oxygenates, which include 1) interactions of oxygenates of varied molecular size with active sites of the catalysts, 2) determining the conformation of oxygenates on the active site at the point of interaction, and 3) effects of oxygen contents of oxygenates on the reaction rate of HDO. It is realized that the molecular interactions of oxygenates with the surface of the catalyst dominates the degree and nature of deoxygenation to derive products with desired selectivity by overcoming complex separation processes in a biorefinery. Those oxygenates with high carbon numbers (>C10), multiple furan rings, and branched architectures are even more complex to understand. This article aims to focus on concise mechanistic analysis of biorefinery oxygenates (C_10-35 ) for their deoxygenation processes, with a special emphasis on their interactions with active sites in a complex chemical environment. This article also addresses differentiation of the mode of interactions based on the molecular size of oxygenates. Deoxygenation processes coupled with or without ring opening of furan-based oxygenates and site-substrate cooperativity dictate the formation of diverse value-added products. Oxygen removal has been the key step for microbial deoxygenation by the use of oxygen-removing decarbonylase enzymes. However, challenges to obtain branched and long-chain hydrocarbons remain, which require special attention, including the invention of newer techniques to upgrade the process for combined depolymerization-HDO from real biomass.

Biomass valorisation over metal-based solid catalysts from nanoparticles to single atoms

Heterogeneous catalysts are vital to unlock superior efficiency, atom economy, and environmental friendliness in chemical conversions, with the size and speciation of the contained metals often playing a decisive role in the activity, selectivity and stability. This tutorial review analyses the impact of these catalyst parameters on the valorisation of biomass through hydrogenation and hydrodeoxygenation, oxidation, reforming and acid-catalysed reactions, spanning a broad spectrum of substrates including sugars and platform compounds obtained from (hemi)cellulose and lignin derivatives. It outlines multiple examples of classical structure sensitivity on nanoparticle-based materials with significant implications for the product distribution. It also shows how the recently emphasised application of metals in the form of ultrasmall nanoparticles (<2 nm), clusters and single atoms, while fulfilling superior metal utilisation and robustness, opens the door to unprecedented electronic and geometric properties. The latter can lead to facilitated activation of reactants as well as boosted selectivity control and synergy between distinct active sites in multifunctional catalysts. Based on the analysis conducted, guidelines for the selection of metals for diverse applications are put forward in terms of chemical identity and structure, and aspects that should be explored in greater depth for further improving the exploitation of metals in this research field and beyond are highlighted.

Erythritol: Another C4 Platform Chemical in Biomass Refinery

The potential of erythritol as a platform chemical in biomass refinery is discussed in terms of erythritol production and utilization. Regarding erythritol production, fermentation of sugar or starch has been already commercialized. The shift of the carbon source from glucose to inexpensive inedible waste glycerol is being investigated, which will decrease the price of erythritol. The carbon-based yield of erythritol from glycerol is comparable to or even higher than that from glucose. The metabolic pathway of erythritol biosynthesis has become clarified: erythrose-4-phosphate, which is one of the intermediates in the pentose phosphate pathway, is dephosphorylated and reduced to erythritol. The information about the metabolic pathway may give insights to improve the productivity by bleeding. Regarding erythritol utilization, chemical conversions of erythritol, especially deoxygenation, have been investigated in these days. Erythritol is easily dehydrated to 1,4-anhydroerythritol, which can be also used as the substrate for production of useful C4 chemicals. C-O hydrogenolysis and deoxydehydration using heterogeneous catalysts are effective reactions for erythritol/1,4-anhydroerythritol conversion.

Reduction of sugar derivatives to valuable chemicals: utilization of asymmetric carbons

Recent progress on non-furfural routes from sugar derivatives to valuable chemicals including chiral chemicals was reviewed.

N,N,O-Coordinated tricarbonylrhenium precatalysts for the aerobic deoxydehydration of diols and polyols

The bench-top stable and synthetically easily accessible, low-valent NNO–rhenium complex L⁴Re(CO)₃ provides an alternative to high-valent rhenium catalysts in DODH chemistry.

Influence of the pendant arm in deoxydehydration catalyzed by dioxomolybdenum complexes supported by amine bisphenolate ligands

Molybdenum complexes devoid of a strongly coordinating pendant arm result in enhanced catalytic activity.

Tungsten–zirconia-supported rhenium catalyst combined with a deoxydehydration catalyst for the one-pot synthesis of 1,4-butanediol from 1,4-anhydroerythritol

Biomass-derived 1,4-anhydroerythritol is reduced to 1,4-butanediol over a reusable mixture of heterogeneous catalysts, ReO_x–Au/CeO₂ and ReO_x/WO₃–ZrO₂.

Deoxydehydration of 1,4-anhydroerythritol over anatase TiO2(101)-supported ReOx and MoOx

Heterogeneously catalyzed deoxydehydration (DODH) ordinarily occurs over oxide supported ReO_x sites. A comparably high activity of MoO_x/TiO₂(101) suggests that it is a promising low-cost DODH catalyst that can replace Re-based catalysts.

Recent Advances in the Deoxydehydration of Vicinal Diols and Polyols

Deoxydehydration (DODH) is one of the most promising tools to reduce the oxygen content of biomass (sugars and polyols) and provide analogues of platform chemicals that are derived from fossil resources. This reaction converts a vicinal diol into an alkene and is typically catalyzed by high-oxidation-state metal-oxo compounds in the presence of a stoichiometric reductant, with examples of both homogeneous and heterogeneous systems. This minireview will highlight the developments in this field over the past 5 years and focus on efforts to solve the problems that currently prevent DODH being performed on a commercial scale, including the nature of the reductant, substrate scope and selectivity, and catalyst recovery and expense.

Preparation of Highly Active Monometallic Rhenium Catalysts for Selective Synthesis of 1,4-Butanediol from 1,4-Anhydroerythritol

1,4-Butanediol can be produced from 1,4-anhydroerythritol through the co-catalysis of monometallic mixed catalysts (ReO_x /CeO₂ +ReO_x /C) in the one-pot reduction with H₂ . The highest yield of 1,4-butanediol was over 80 %, which is similar to the value obtained over ReO_x -Au/CeO₂ +ReO_x /C catalysts. Mixed catalysts of CeO₂ +ReO_x /C showed almost the same performance, giving 89 % yield of 1,4-butanediol. The reactivity trends of possible intermediates suggest that the reaction mechanism over ReO_x /CeO₂ +ReO_x /C is similar to that over ReO_x -Au/CeO₂ +ReO_x /C: deoxydehydration (DODH) of 1,4-anhydroerythritol to 2,5-dihydrofuran over ReO_x species on the CeO₂ support with the promotion of H₂ activation by ReO_x /C, isomerization of 2,5-dihydrofuran to 2,3-dihydrofuran catalyzed by ReO_x on the C support, hydration of 2,3-dihydrofuran catalyzed by C, and hydrogenation to 1,4-butanediol catalyzed by ReO_x /C. The reaction order of conversion of 1,4-anhydroerythritol with respect to H₂ pressure is almost zero and this indicates that the rate-determining step is the formation of 2,5-dihydrofuran from the coordinated substrate with reduced Re in the DODH step. The activity of ReO_x /CeO₂ +ReO_x /C is higher than that of ReO_x -Au/CeO₂ +ReO_x /C, which is probably related to the reducibility of ReO_x /C and the mobility of the Re species between the supports. High-valent Re species such as Re⁷⁺ on the CeO₂ and C supports are mobile in the solvent; however, low-valent Re species, including metallic Re species, have much lower mobility. Metallic Re and cationic low-valent Re species with high reducibility and low mobility can be present on the carbon support as a trigger for H₂ activation and promoter of the reduction of Re species on CeO₂ . The presence of noble metals such as Au can enhance the reducibility through the activation of H₂ molecules on the noble metal and the formation of spilt-over hydrogen over noble metal/CeO₂ , as indicated by H₂ temperature-programmed reduction. The higher reducibility of ReO_x -Au/CeO₂ lowers the DODH activity of ReO_x -Au/CeO₂ +ReO_x /C in comparison with ReO_x /CeO₂ +ReO_x /C by restricting the movement of Re species from C to CeO₂ .

Mechanistic study of the selective hydrogenation of carboxylic acid derivatives over supported rhenium catalysts

The structure and performance of TiO₂-supported Re (Re/TiO₂) catalysts for selective hydrogenation of carboxylic acid derivatives have been investigated.

First Attempt of Glycidol-to-Monoalkyl Glyceryl Ethers Conversion by Acid Heterogeneous Catalysis: Synthesis and Simplified Sustainability Assessment

The selective preparation of monoalkylglyceryl ethers (MAGEs) is a task for researchers owing to their broad range of applications. In this work, green feedstocks such as glycidol and alcohols were used to prepare MAGEs under mild reaction conditions (80 °C, 3 h, 0.5 mol % catalyst) in the presence of acid heterogeneous catalysts. Nafion shows the best performances in terms of conversion and selectivity to MAGES and also high stability. A comparison of the environmental performances with the most consolidated pathway from glycerol has shown that the usage of glycidol (recovered as a value-added product from Epicerol process) and Nafion leads to a lower impact on ecosystems. In addition, results achieved from a simplified socio-economic analysis show that the innovative route here proposed has potential (at the laboratory scale) of enhancing potential gains and of reducing the social implications resulting from externalities associated with environmental impacts (e.g., CO₂ equivalents).