Polystyrene-Supported TRIP: A Highly Recyclable Catalyst for Batch and Flow Enantioselective Allylation of Aldehydes

A robust heterogeneous chiral phosphoric acid enables multi decagram scale production of optically active N,S-ketals

Asymmetric organocatalysis has been recognized as one of the "top 10 emerging technologies" in chemistry by IUPAC in 2019. Its potential to make chemical processes more sustainable is promising, but there are still challenges that need to be addressed. Developing new and reliable enantioselective processes for reproducing batch reactions on a large scale requires a combination of chemical and technical solutions. In this manuscript, we combine a robust immobilized chiral phosphoric acid with a new packed-bed reactor design. This combination allows scaling up of the enantioselective addition of thiols to imines from a few milligrams to a multi-decagram scale in a continuous flow process without physical or chemical degradation of the catalyst.

General, Modular Access toward Immobilized Chiral Phosphoric Acid Catalysts and Their Application in Flow Chemistry

Chiral phosphoric acids (CPAs) are among the most frequently used organocatalysts, with an ever-increasing number of applications. However, these catalysts are only obtained in a multistep synthesis and are poorly recyclable, which significantly deteriorates their environmental and economic performance. We herein report a conceptually different, general strategy for the direct immobilization of CPAs on a broad scope of solid supports including silica, polystyrene, and aluminum oxide. Solid-state catalysts were obtained in high yields and thoroughly characterized with elemental analysis by inductively coupled plasma-optical emission spectrometry (ICP-OES), nitrogen sorption measurements, thermogravimetric analysis, scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy (STEM/EDX) images, and solid-state NMR spectroscopy. Further, the immobilized catalysts were applied to a variety of synthetically valuable, highly stereoselective transformations under batch and flow conditions including transfer hydrogenations, a Friedländer condensation/transfer hydrogenation sequence, and Mannich reactions under cryogenic flow conditions. Generally, high yields and stereoselectivities were observed along with robust catalyst stability and reusability. After being used for 10 runs under batch conditions, no loss of selectivity or catalytic activity was observed. Under continuous-flow conditions, the heterogeneous system was in operation for 19 h and the high enantioselectivity remained unchanged throughout the entire process. We expect our approach to extend the applicability of CPAs to a higher level, with a focus on flow chemistry and a more environmentally friendly and resource-efficient use of these powerful catalysts.

Ionic liquid containing high-density polyethylene supported tungstate: a novel, efficient, and highly recoverable catalyst

Synthesis and catalytic application of polymeric-based nanocomposites are important subjects among researchers due to their high lipophilicity as well as high chemical and mechanical stability. In the present work, a novel nanocomposite material involving ionic liquid and high-density polyethylene supported tungstate (PE/IL-WO4 =) is synthesized, characterized and its catalytic application is investigated. The coacervation method was used to incorporate 1-methyl-3-octylimidazolium bromide ([MOIm] [Br]) ionic liquid in high-density polyethylene, resulting in a PE/IL composite. Subsequently, tungstate was anchored on PE/IL to give PE/IL-WO4 = catalyst. The PXRD, FT-IR, EDX, TGA, and SEM analyses were used to characterize the PE/IL-WO4 = composite. This material demonstrated high catalytic efficiency in the synthesis of bioactive tetrahydrobenzo[a]xanthen-11-ones under green conditions. The recoverability and leching tests were performed to investigate the stability and durability of the designed PE/IL-WO4 = catalyst under applied conditions.

A Telescoped Continuous Flow Enantioselective Process for Accessing Intermediates of 1-Aryl-1,3-diols as Chiral Building Blocks

A telescoped continuous flow process is reported for the enantioselective synthesis of chiral precursors of 1-aryl-1,3-diols, intermediates in the synthesis of ezetimibe, dapoxetine, duloxetine, and atomoxetine. The two-step sequence consists of an asymmetric allylboration of readily available aldehydes using a polymer-supported chiral phosphoric acid catalyst to introduce asymmetry, followed by selective epoxidation of the resulting alkene. The process is highly stable for at least 7 h and represents a transition-metal free enantioselective approach to valuable 1-aryl-1,3-diols.

Development of Immobilized Carreira (Phosphoramidite, Olefin) Ligands and Application in Iridium-Catalyzed Asymmetric Allylic Amination

A family of polystyrene-supported (phosphoramidite, olefin) ligands L1-L4, based on the original design by Defieber and Carreira, has been developed and applied in iridium-catalyzed asymmetric allylic amination of unmasked allylic alcohols (27 examples, up to 99% ee). Among them, functional resins L1 and L4 exhibit important advantages such as easy preparation, ligand recyclability, and easy handling for sequential use. As a distinctive advantage, the catalytic use of the iridium complexes of L1 and L4 allows the straightforward reuse of a high percentage of the expensive iridium metal involved in the complexes, which is not achievable under homogeneous conditions with the corresponding monomeric complexes.

Organocatalytic chiral polymeric nanoparticles for asymmetric aldol reaction

Chiral polymeric particles (CPPs) were studied extensively in recent years due to their importance in pharmaceutical applications. Here, nanosized CPPs were synthesized and applied as catalysts for direct asymmetric aldol reaction. The CPPs were prepared by miniemulsion or inverse miniemulsion based on various chiral amino acid derivatives and characterized by dynamic light scattering and scanning electron microscopy. The nanoparticles with spherical structure between 250 and 400 nm and high chiral surface area were used as catalysts in the aldol reaction at room temperature without additional solvent. l-tryptophan gave the highest enantiomeric excess, >86% with similar catalytic performance four times.

Design, synthesis, and evaluation of chiral thiophosphorus acids as organocatalysts

A series of P-stereogenic chiral phosphorus acids (CPAs) were synthesized to determine the requirements for efficient asymmetric organocatalysis. In order to eliminate the need for C 2-symmetry in common CPAs, various scaffolds containing C 1-symmetrical thiophosphorus acids were chosen. These new compounds were synthesized and evaluated in the asymmetric transfer hydrogenation of 2-phenylquinoline. Although the efficacy of the thiophosphorus acids was disappointing for this reaction, the work should be useful for developing structural design elements.

Chiral Phosphoric Acid-Catalyzed Enantio- and Diastereoselective Allylboration of Aldehydes with β,γ-Substituted Allylboronates

The catalytic asymmetric addition of β,γ-substituted allylboronates to aldehydes has been described. Promoted by 5 mol % chiral phosphoric acid, the reactions were broadly applicable, scalable, and efficient, allowing for the formation of 3,4-anti/syn-homoallylic alcohols bearing adjacent tertiary or quaternary stereogenic centers in a highly enantio- and diastereoselective manner (≤99% ee and dr >20:1). The rigid chairlike transition state involving the chiral phosphoric acid contributed to the highly controlled reaction.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Studies of Catalyst-Controlled Regioselective Acetalization and Its Application to Single-Pot Synthesis of Differentially Protected Saccharides

This article describes studies on the regioselective acetal protection of monosaccharide-based diols using chiral phosphoric acids (CPAs) and their immobilized polymeric variants, (R)-Ad-TRIP-PS and (S)-SPINOL-PS, as the catalysts. These catalyst-controlled regioselective acetalizations were found to proceed with high regioselectivities (up to >25:1 rr) on various d-glucose-, d-galactose-, d-mannose-, and l-fucose-derived 1,2-diols and could be carried out in a regiodivergent fashion depending on the choice of chiral catalyst. The polymeric catalysts were conveniently recycled and reused multiple times for gram-scale functionalizations with catalytic loadings as low as 0.1 mol %, and their performance was often found to be superior to the performance of their monomeric variants. These regioselective CPA-catalyzed acetalizations were successfully combined with common hydroxyl group functionalizations as single-pot telescoped procedures to produce 32 regioisomerically pure differentially protected mono- and disaccharide derivatives. To further demonstrate the utility of the polymeric catalysts, the same batch of (R)-Ad-TRIP-PS catalyst was recycled and reused to accomplish single-pot gram-scale syntheses of 6 differentially protected d-glucose derivatives. The subsequent exploration of the reaction mechanism using NMR studies of deuterated and nondeuterated substrates revealed that low-temperature acetalizations happen via a syn-addition mechanism and that the reaction regioselectivity exhibits strong dependence on the temperature. The computational studies indicate a complex temperature-dependent interplay of two reaction mechanisms, one involving an anomeric phosphate intermediate and another via concerted asynchronous formation of an acetal, that results in syn-addition products. The computational models also explain the steric factors responsible for the observed C2 selectivities and are consistent with experimentally observed selectivity trends.

Cobalt-Catalyzed Diastereo- and Enantioselective Reductive Allyl Additions to Aldehydes with Allylic Alcohol Derivatives via Allyl Radical Intermediates

Catalytic generation of ambiphilic π-allyl-metal complexes and their utility in enantioselective transformations constitutes a powerful approach for introduction of allyl groups to a molecule. Herein an unprecedented cobalt-catalyzed highly site-, diastereo-, and enantioselective protocol for stereoselective formation of nucleophilic allyl-Co(II) complexes followed by addition to aldehydes is presented. The reaction features diastereo- and enantioconvergent conversion of easily accessible allylic alcohol derivatives to diversified enantioenriched homoallylic alcohols with a remarkably broad scope of allyl groups that can be introduced. Mechanistic studies indicated that allyl radical intermediates were involved in this process. These new discoveries establish a new strategy for development of enantioselective transformations through capture of radicals by chiral Co complexes, pushing forward the frontier of Co complexes for enantioselective catalysis.

Enantioselective anti- and syn-(Borylmethyl)allylation of Aldehydes via Brønsted Acid Catalysis

The enantioselective anti- and syn-(borylmethyl)allylation of aldehydes via phosphoric acid catalysis is reported. Both (E)- and (Z)-γ-borylmethyl allylboronate reagents were prepared via the Cu-catalyzed highly stereoselective protoboration of 1,3-dienylboronate. Chiral phosphoric acid-catalyzed aldehyde allylation with either the (E)- or (Z)-allylboron reagent provided 1,2-anti- or 1,2-syn-adducts in good yields with high enantioselectivities. The application to the synthesis of morinol D was accomplished.

The charge-assisted hydrogen-bonded organic framework (CAHOF) self-assembled from the conjugated acid of tetrakis(4-aminophenyl)methane and 2,6-naphthalenedisulfonate as a new class of recyclable Brønsted acid catalysts

The acid-base neutralization reaction of commercially available disodium 2,6-naphthalenedisulfonate (NDS, 2 equivalents) and the tetrahydrochloride salt of tetrakis(4-aminophenyl)methane (TAPM, 1 equivalent) in water gave a novel three-dimensional charge-assisted hydrogen-bonded framework (CAHOF, F-1). The framework F-1 was characterized by X-ray diffraction, TGA, elemental analysis, and ¹H NMR spectroscopy. The framework was supported by hydrogen bonds between the sulfonate anions and the ammonium cations of NDS and protonated TAPM moieties, respectively. The CAHOF material functioned as a new type of catalytically active Brønsted acid in a series of reactions, including the ring opening of epoxides by water and alcohols. A Diels-Alder reaction between cyclopentadiene and methyl vinyl ketone was also catalyzed by F-1 in heptane. Depending on the polarity of the solvent mixture, the CAHOF F-1 could function as a purely heterogeneous catalyst or partly dissociate, providing some dissolved F-1 as the real catalyst. In all cases, the catalyst could easily be recovered and recycled.

Recent Advances in Continuous-Flow Enantioselective Catalysis

The increased demand for more efficient, safe, and green production in fine chemical and pharmaceutical industry calls for the development of continuous-flow manufacturing, and for chiral chemicals in particular, enantioselective catalytic processes. In recent years, this emerging direction has received considerable attention and has seen rapid progress. In most cases, catalytic enantioselective flow processes using homogeneous, heterogeneous, or enzymatic catalysts have shown significant advantages over the conventional batch mode, such as shortened reaction times, lower catalysts loadings, and higher selectivities in addition to the normal merits of non-enantioselective flow operations. In this Minireview, the advancements, key strategies, methods, and technologies developed the last six years as well as remaining challenges are summarized.

Recent advances in continuous-flow organocatalysis for process intensification

The progresses on continuous-flow organocatalysis from 2016 to early 2020 are reviewed with focus on transition from batch to flow.

Electrostatically Enhanced Phosphoric Acids and Their Applications in Asymmetric Friedel-Crafts Alkylations

A series of electrostatically enhanced phosphoric acid catalysts were synthesized and studied. These compounds possess two positively charged N-octylpyridinium or triarylphosphonium ion centers at the 3,3'-positions of the (R)-BINOL backbone to enhance reactivity and provide needed steric bulk for enantioselective transformations. Catalytic activities for Friedel-Crafts alkylations of indoles with trans-β-nitrostyrenes were studied. Both types of catalysts accelerate reaction conversions relative to noncharged analogues, and good enantioselectivities up to 90% ee are observed with the phosphonium-ion-tagged phosphoric acids. This transformation also can be scaled up to synthetically useful amounts, affording >250 mg of product without losing any reactivity or selectivity.

Highly Stable Zr(IV)-Based Metal-Organic Frameworks with Chiral Phosphoric Acids for Catalytic Asymmetric Tandem Reactions

Heterogeneous Brønsted acid catalysts featuring high porosity, crystallinity, and stability have been of great interest for both fundamental studies and practical applications, but synthetically, they still face a formidable challenge. Here, we illustrated a ligand design strategy for directly installing chiral phosphoric acid catalysts into highly stable Zr-MOFs by sterically protecting them from coordinating with metal ions. A pair of chiral porous Zr(IV)-MOFs with the framework formula [Zr₆O₄(OH)₈(H₂O)₄(L)₂] were prepared from enantiopure 4,4',6,6'-tetra(benzoate) and -tetra(2-naphthoate) ligands of 1,1'-spirobiindane-7,7'-phosphoric acid. They share the same topological structure but differ in channel sizes, and both of them demonstrate excellent tolerance toward water, acid and base. Significantly enhanced Brønsted acidity was observed for the phosphoric acids that are uniformly distributed within the frameworks in comparison with the nonimmobilized acids. This not only facilitates the catalysis of asymmetric two-component tandem acetalization, Friedel-Crafts, and iso-Pictet-Spengler reactions but also promotes the catalysis of asymmetric three-component tandem deacetalization-acetalization and Friedel-Crafts reactions benefiting from the synergy with exposed Lewis acidic Zr(IV) sites. The enantioselectivities are comparable or favorable compared to those obtained from the corresponding homogeneous systems. The features of high reactivity, selectivity, stability, and recyclability for Zr(IV)-MOFs make them hold promise as a new type of heterogeneous acid catalyst for the eco-friendly synthesis of fine chemicals.

Permanent porous hydrogen-bonded frameworks with two types of Brønsted acid sites for heterogeneous asymmetric catalysis

The search for porous materials with strong Brønsted acid sites for challenging reactions has long been of significant interest, but it remains a formidable synthetic challenge. Here we demonstrate a cage extension strategy to construct chiral permanent porous hydrogen-bonded frameworks with strong Brønsted acid groups for heterogeneous asymmetric catalysis. We report the synthesis of two octahedral coordination cages using enantiopure 4,4’,6,6’-tetra(benzoate) ligand of 1,1’-spirobiindane-7,7’-phosphoric acid and Ni₄/Co₄-p-tert-butylsulfonylcalix[4]arene clusters. Intercage hydrogen-bonds and hydrophobic interactions between tert-butyl groups direct the hierarchical assembly of the cages into a permanent porous material. The chiral phosphoric acid-containing frameworks can be high efficient and recyclable heterogeneous Brønsted acid catalysts for asymmetric [3+2] coupling of indoles with quinone monoimine and Friedel-Crafts alkylations of indole with aryl aldimines. The afforded enantioselectivities (up to 99.9% ee) surpass those of the homogeneous counterparts and compare favorably with those of the most enantioselective homogeneous phosphoric acid catalysts reported to date.

The search for porous materials with strong Brønsted acid sites for challenging chemical reactions has been of significant interest, but remains challenging. Here the authors report a cage extension strategy to construct chiral permanent porous hydrogen-bonded frameworks with strong Brønsted acid groups for heterogeneous asymmetric catalysis.

Asymmetric fluorination of indanone-2-carboxylates using a polystyrene-supported diphenylamine-linked bis(oxazoline) complex

A highly enantioselective fluorination of indanone-2-carboxylates catalyzed by a polystyrene-supported diphenylamine-linked bis(oxazoline) (PS-box)-Cu(OTf)₂ complex has been developed in a continuous flow system. The supported complex exhibited extremely efficient catalytic performance with high activity, affording the corresponding products in excellent yields (up to 99% yield) with excellent enantioselectivities (up to 99% ee) and more than 4000 turnover number (TON).

A Versatile Bis-Allylboron Reagent for the Stereoselective Synthesis of Chiral Diols

Allylboron reagents are popular in synthesis owing to their versatility and the predictable stereochemical outcomes of their reactions with carbonyl compounds. Herein, we describe the synthesis of (Z,Z)-hexadienyl bis-boronate 1, a configurationally stable, crystalline, and easy to handle compound, which represents a class of bis-allylic boron reagents with heretofore untapped synthetic potential. In combination with a chiral phosphoric acid catalyst, the reagent can be employed for the enantioselective allyl transfer reaction to a variety of one-pot transformations, enabling swift access to functionalized 1,n-diols. The in situ conversion of the reagent into the corresponding bis-borinic ester allows for the direct and diastereoselective two-fold allyl transfer to aldehydes. This affords C2 - or Ci -symmetric stereotetrads containing a 1,4-diol moiety for natural product synthesis. The usefulness of our method was demonstrated with a short synthesis of the lignan (±)-neo-olivil.

Asymmetric Arylation of 2,2,2-Trifluoroacetophenones Catalyzed by Chiral Electrostatically-Enhanced Phosphoric Acids

A series of highly reactive metal-free chiral phosphoric acids possessing positively charged phosphonium ion substituents are reported and have been applied to Friedel-Crafts alkylations of indoles and 2,2,2-trifluoromethyl aryl ketones. These catalysts are orders-of-magnitude more active and have similar or better enantioselectivities than their noncharged analogues. High tolerance to a range of substrates with electron-withdrawing and electron-donating substituents was also observed.

Desymmetrisation of meso-diones promoted by a highly recyclable polymer-supported chiral phosphoric acid catalyst

A polystyrene-supported BINOL-derived chiral phosphoric acid has been applied to the desymmetrisation of meso-diones to produce enantioenriched cyclohexenones. The catalytic resin has proven highly active and robust, giving rise to Hajos-Parrish or Wieland-Miescher type products in good yields and enantioselectivities, while allowing for extended recycling.

Chiral catalysts immobilized on achiral polymers: effect of the polymer support on the performance of the catalyst

Achiral polymeric supports can have important positive effects on the activity, stability and selectivity of supported chiral catalysts.