Selective Semihydrogenation of Alkynes with N-Graphitic-Modified Cobalt Nanoparticles Supported on Silica

Unprecedented Mo3S4 cluster-catalyzed radical C-C cross-coupling reactions of aryl alkynes and acrylates

A new method for the generation of benzyl radicals from terminal aromatic alkynes has been developed, which allows the direct cross coupling with acrylate derivatives. Our additive-free protocol employs air-stable diamino Mo3S4 cubane-type cluster catalysts in the presence of hydrogen. A sulfur-centered cluster catalysis mechanism for benzyl radical formation is proposed based on catalytic and stoichiometric experiments. The process starts with the cluster hydrogen activation to form a bis(hydrosulfido) [Mo3(μ3-S)(μ-S)(μ-SH)2Cl3(dmen)3]+ intermediate. The reaction of various aromatic terminal alkynes containing different functionalities with a series of acrylates affords the corresponding Giese-type radical addition products.

Mesoporous α-Al2O3-supported PdCu bimetallic nanoparticle catalyst for the selective semi-hydrogenation of alkynes

The selective hydrogenation of alkynes to alkenes is widely applied in the chemical industry; nevertheless, achieving highly selective hydrogenation with high catalytic activity is considerably challenging. Herein, ultrafine PdCu bimetallic nanoparticles encapsulated by high-surface-area mesoporous α-Al2O3 were prepared by high-temperature calcination-reduction using a porous organic framework (POF) as the template. As-obtained PdCu@α-Al2O3 exhibited a high selectivity of 95% for the semi-hydrogenation of phenylacetylene as a probe reaction under mild reaction conditions. The separation of continuous Pd atoms and modification of the Pd electronic state by Cu atoms suppressed β-hydride formation and alkene adsorption, contributing to high selectivity for the catalytic hydrogenation of alkynes. The catalytic activity was maintained after 7 cycles due to the strong interaction between the PdCu bimetallic nanoparticles and α-Al2O3 as well as the encapsulation effect of mesoporous α-Al2O3. Thus, the current work provides a facile strategy for fabricating high-surface-area mesoporous α-Al2O3-supported catalysts for industrial catalysis applications.

Enhanced Alkene Selectivity for Transfer Semihydrogenation of Alkynes over Electron-Deficient Pt Nanoparticles Encapsulated in Hollow Silica Nanospheres

In this work, we report that Pt nanoparticles confined in hollow porous silica nanospheres (Pt@HPSNs) function as highly selective catalysts for the transfer hydrogenation of phenylacetylene to styrene with ammonia borane. Relative to the deep hydrogenation of phenylacetylene to ethylbenzene over the supported Pt/SiO2, Pt@HPSNs exhibit above 88% of styrene selectivity at nearly 100% of phenylacetylene conversions, and the high selectivity of Pt@HPSNs can be maintained even at high ammonia borane/phenylacetylene ratios and longer reaction time. The Pt 4f X-ray photoelectron spectrum of Pt@HPSNs shows a remarkable ∼1.5 eV shift to high binding energy, proving the nature of electron deficiency of such encapsulated Pt nanoparticles. Combined with extremely minor transfer hydrogenation of styrene to ethylbenzene when styrene as substrates, the enhanced styrene selectivity of Pt@HPSNs is ascribed to the electron deficiency of encapsulated Pt nanoparticles, which leads to the fast desorption of styrene and thus avoids deep hydrogenation.

Electron-Poor Phosphines Enable the Selective Semihydrogenation Reaction of Alkynes with Pd on Carbon Catalysts

An alternative to the Lindlar catalyst for the semihydrogenation reaction of alkynes to alkenes is of high interest. Here we show that palladium on carbon (Pd/C), i.e., a widely available supported Pd catalyst, is converted from an unselective to a chemoselective catalyst during the semihydrogenation reaction of alkynes, after the addition of catalytic amounts of commercially available electron-poor phosphines. The catalytic activity is ≤7 times greater, and the selectivity is comparable to that of the industrial benchmark Lindlar catalyst.

Stereoselective Semi-Hydrogenations of Alkynes by First-Row (3d) Transition Metal Catalysts

The chemo- and stereoselective semi-hydrogenation of alkynes to alkenes is a fundamental transformation in synthetic chemistry, for which the use of precious 4d or 5d metal catalysts is well-established. In mankind's unwavering quest for sustainability, research focus has considerably veered towards the 3d metals. Given their high abundancy and availability as well as lower toxicity and noxiousness, they are undoubtedly attractive from both an economic and an environmental perspective. Herein, we wish to present noteworthy and groundbreaking examples for the use of 3d metal catalysts for diastereoselective alkyne semi-hydrogenation as we embark on a journey through the first-row transition metals.

Electrocatalytic Semihydrogenation of Alkynes with [Ni(bpy)3]2

Electrifying the production of base and fine chemicals calls for the development of electrocatalytic methodologies for these transformations. We show here that the semihydrogenation of alkynes, an important transformation in organic synthesis, is electrocatalyzed at room temperature by a simple complex of earth-abundant nickel, [Ni(bpy)₃]²⁺. The approach operates under mild conditions and is selective toward the semihydrogenated olefins with good to very good Z isomer stereoselectivity. (Spectro)electrochemistry supports that the electrocatalytic cycle is initiated in an atypical manner with a nickelacyclopropene complex, which upon further protonation is converted into a putative cationic Ni(II)-vinyl intermediate that produces the olefin after electron-proton uptake. This work establishes a proof of concept for homogeneous electrocatalysis applied to alkyne semihydrogenation, with opportunities to improve the yields and stereoselectivity.

Low-Valent Molybdenum PNP Pincer Complexes as Catalysts for the Semihydrogenation of Alkynes

Low-valent molybdenum PNP pincer complexes were studied as catalysts for the semihydrogenation of alkynes. For that purpose, tBu-substituted PNP complexes PNP^tBuMo(CO)₂ (6a) and PNP^tBuMo(CO)₃ (6c) and the NNP complex NNP^iPrMo(CO)₂(PPh₃) ((rac)-7) were synthesized and characterized. By utilizing the cyclohexyl-substituted complex PNP^CyMo(CO)₂(CH₃CN) (5a), several diphenylacetylene derivatives are transformed to the corresponding (Z)-alkenes with good to very good diastereoselectivities (up to 91:9). Mechanistic experiments indicate an outer-sphere mechanism including metal–ligand cooperativity.

A Convenient and Stable Heterogeneous Nickel Catalyst for Hydrodehalogenation of Aryl Halides Using Molecular Hydrogen

Hydrodehalogenation is an effective strategy for transforming persistent and potentially toxic organohalides into their more benign congeners. Common methods utilize Pd/C or Raney-nickel as catalysts, which are either expensive or have safety concerns. In this study, a nickel-based catalyst supported on titania (Ni-phen@TiO₂ -800) is used as a safe alternative to pyrophoric Raney-nickel. The catalyst is prepared in a straightforward fashion by deposition of nickel(II)/1,10-phenanthroline on titania, followed by pyrolysis. The catalytic material, which was characterized by SEM, TEM, XRD, and XPS, consists of nickel nanoparticles covered with N-doped carbon layers. By using design of experiments (DoE), this nanostructured catalyst is found to be proficient for the facile and selective hydrodehalogenation of a diverse range of substrates bearing C-I, C-Br, or C-Cl bonds (>30 examples). The practicality of this catalyst system is demonstrated by the dehalogenation of environmentally hazardous and polyhalogenated substrates atrazine, tetrabromobisphenol A, tetrachlorobenzene, and a polybrominated diphenyl ether (PBDE).

Manganese-catalyzed transfer semihydrogenation of internal alkynes to E-alkenes with iPrOH as hydrogen source

The Mn-catalyzed transfer semihydrogenation of internal alkynes to E-alkenes is reported herein, along with Mn-catalyzed hydration of α-keto alkynes. Mechanistic studies displayed an asymmetrical Mn-hydride species performing the catalytic turnover.

CoCe/N–C hybrids constructed via Ce–O–Co solid solution for the deoxygenation of sulfoxide

CeO2-promoted Co–N–C hybrids were prepared by the strategy of solid solution construction for the deoxygenation of sulfoxide.

Unraveling High Alkene Selectivity at Full Conversion in Alkyne Hydrogenation over Ni under Continuous Flow Conditions

Selective hydrogenation of alkynes into alkenes in continuous flow conditions over non-precious metal catalysts is an attractive prospect for the chemical industry, especially for the petrochemical and polymer industry. Achieving...

Exploiting the Potential of Biosilica from Rice Husk as Porous Support for Catalytically Active Iron Oxide Nanoparticles

Biomass-derived materials are put forward as eco-friendly alternatives to design heterogeneous catalysts. To contribute in this field, we explored the potential of mesoporous biogenic silica (RH-Silica) obtained from lignocellulosic waste, in particular from rice husk, as an inorganic support to prepare heterogenized iron oxide-based catalysts. Mechanochemistry, considered as a green and sustainable technique, was employed to synthetize iron oxide nanoparticles in pure hematite phase onto the biosilica (α-Fe₂O₃/RH-Silica), making this material a good candidate to perform catalyzed organic reactions. The obtained material was characterized by different techniques, and its catalytic activity was tested in the selective oxidation of styrene under microwave irradiation. α-Fe₂O₃/RH-Silica displayed a good catalytic performance, achieving a conversion of 45% under optimized conditions, and more importantly, with a total selectivity to benzaldehyde. Furthermore, a good reusability was achieved without decreasing its activity after multiple catalytic cycles. This work represents a good example of using sustainable approaches and green materials as alternatives to conventional methods in the production of high-added value products.

Cascade Synthesis of Pyrroles from Nitroarenes with Benign Reductants Using a Heterogeneous Cobalt Catalyst

A bifunctional 3d-metal catalyst for the cascade synthesis of diverse pyrroles from nitroarenes is presented. The optimal catalytic system Co/NGr-C@SiO2 -L is obtained by pyrolysis of a cobalt-impregnated composite followed by subsequent selective leaching. In the presence of this material, (transfer) hydrogenation of easily available nitroarenes and subsequent Paal-Knorr/Clauson-Kass condensation provides >40 pyrroles in good to high yields using dihydrogen, formic acid, or a CO/H2 O mixture (WGSR conditions) as reductant. In addition to the favorable step economy, this straightforward domino process does not require any solvents or external co-catalysts. The general synthetic utility of this methodology was demonstrated on a variety of functionalized substrates including the preparation of biologically active and pharmaceutically relevant compounds, for example, (+)-Isamoltane.

Aqueous phase semihydrogenation of alkynes over Ni–Fe bimetallic catalysts

Bimetallic Ni–Fe catalysts (Ni/Fe, 1 : 1, 1 : 3, and 3 : 1) are synthesized and explored for their catalytic activity in semihydrogenation of internal alkynes using H₂ gas in water–ethanol solution.

Chemoselective semihydrogenation of alkynes catalyzed by manganese(i)-PNP pincer complexes

A first homogeneous manganese catalyzed chemoselective semihydrogenation of alkynes to Z-olefins in the presence of molecular hydrogen is described.

Liquid-Phase Hydrogenation of Nitriles to Amines Facilitated by a Co(II)/Zn(0) Pair: A Ligand-Free Catalytic Protocol

The given report introduces a simple and user-friendly in situ method for the production of catalytically active cobalt particles. The approach circumvents the use of air- and moisture-sensitive reductants as well as the application of anhydrous Co-precursor salts. Accordingly, the described catalytic system is readily assembled under open-flask conditions by simply combining the components in the reaction vessel. Therefore, the arduous charging procedure of the reaction autoclave in a glovebox under an inert gas atmosphere is no longer necessary. In fact, the catalytically active material is obtained upon treatment of readily available Co(OAc)₂·4 H₂O with benign commercial Zn powder. The catalytic performance of the resultant material was tested in the heterogeneous hydrogenation of nitriles to the corresponding primary amines. Both activity and selectivity of the cobalt catalyst are significantly enhanced if a triflate-based Lewis acid and ammonia is added to the reaction mixture.

Nickel-Catalyzed Stereodivergent Synthesis of E- and Z-Alkenes by Hydrogenation of Alkynes

A convenient protocol for stereodivergent hydrogenation of alkynes to E- and Z-alkenes by using nickel catalysts was developed. Simple Ni(NO3 )2 ⋅6 H2 O as a catalyst precursor formed active nanoparticles, which were effective for the semihydrogenation of several alkynes with high selectivity for the Z-alkene (Z/E>99:1). Upon addition of specific multidentate ligands (triphos, tetraphos), the resulting molecular catalysts were highly selective for the E-alkene products (E/Z>99:1). Mechanistic studies revealed that the Z-alkene-selective catalyst was heterogeneous whereas the E-alkene-selective catalyst was homogeneous. In the latter case, the alkyne was first hydrogenated to a Z-alkene, which was subsequently isomerized to the E-alkene. This proposal was supported by density functional theory calculations. This synthetic methodology was shown to be generally applicable in >40 examples and scalable to multigram-scale experiments.

Bimetallic Co/Al nanoparticles in an ionic liquid: synthesis and application in alkyne hydrogenation

CoAl- and Co₃Al-NPs are effective catalysts for alkyne-to-alkane hydrogenation with DIBAL-H as a co-catalyst under mild conditions (2 bar H₂, 30 °C).

Heterogeneous nickel-catalysed reversible, acceptorless dehydrogenation of N-heterocycles for hydrogen storage

Nickel catalyst for hydrogen storage in N-heterocycles: a heterogeneous nickel catalyst promotes both hydrogenation and subsequent dehydrogenation of quinoline derivatives.

Precise regulation of the selectivity of supported nano-Pd catalysts using polysiloxane coatings with tunable surface wettability

The selective hydrogenation reactions can be realized via the surface modification of supported nano-Pd with tailorable wettability.

Nitrogen and sulfur co-doped cobalt carbon catalysts for ethylbenzene oxidation with synergistically enhanced performance

Heteroatom doping has been demonstrated to be an effective strategy for improving the performance of catalysts. In this paper, cobalt carbon catalysts co-doped with nitrogen and sulfur (N and S) were synthesized through a hydrothermal method with chelate composites involving melamine, thioglycolic acid (C₂H₄O₂S), and tetrahydrate cobalt acetate (Co(OAc)₂·4H₂O). In addition, the selective oxidation of ethylbenzene under solvent-free conditions with molecular oxygen was used as a probe reaction to evaluate the activity of the catalysts. The optimized catalyst shows an ethylbenzene conversion of 48% with an acetophenone selectivity of 85%. Furthermore, the catalysts were systematically characterized by techniques such as TEM, SEM, XRD, Raman, and XPS. The results reveal that the species of cobalt sulfides and synergistic effects between N and S has inserted a key influence on their catalytic performance.

Co-N-S-C catalysts with rod-like structures were synthesized for the selective oxidation of ethylbenzene using O₂ as an oxidant.