Probing the C–O Bond-Formation Step in Metalloporphyrin-Catalyzed C–H Oxygenation Reactions

Iron-Catalyzed Primary Amination of C(sp3)-H Bonds

Primary amines are privileged molecules in drug development. Yet, there is a noticeable scarcity of methods for directly introducing a primary amine group into the ubiquitous C(sp3)-H bonds within organic compounds. Here, we report an iron-based catalytic system that enables direct primary amination of C(sp3)-H bonds under aqueous conditions and air. Various types of C(sp3)-H bonds, including benzylic, allylic, and aliphatic ones, can be readily functionalized with high selectivity and efficiency. The broad utility of this method has been further verified by late-stage amination of 11 complex bioactive molecules. Mechanistic studies unveil a protonated iron-nitrene complex as the key intermediate for the C-H bond activation. This work extends the toolbox for direct C(sp3)-H functionalizations, opening up new opportunities for late-stage modifications of organic molecules.

Radical and Cationic Pathways in C(sp3)-H Bond Oxygenation by Dioxiranes of Bicyclic and Spirocyclic Hydrocarbons Bearing Cyclopropane Moieties

A product and DFT computational study on the reactions of 3-ethyl-3-(trifluoromethyl)dioxirane (ETFDO) with bicyclic and spirocyclic hydrocarbons bearing cyclopropyl groups was carried out. With bicyclo[n.1.0]alkanes (n = 3-6), diastereoselective formation of the alcohol product derived from C2-H bond hydroxylation was observed, accompanied by smaller amounts of products derived from oxygenation at other sites. With 1-methylbicyclo[4.1.0]heptane, rearranged products were also observed in addition to the unrearranged products deriving from oxygenation at the most activated C2-H and C5-H bonds. With spiro[2.5]octane and 6-tert-butylspiro[2.5]octane, reaction with ETFDO occurred predominantly or exclusively at the axial C4-H to give unrearranged oxygenation products, accompanied by smaller amounts of rearranged bicyclo[4.2.0]octan-1-ols. The good to outstanding site-selectivities and diastereoselectivities are paralleled by the calculated activation free energies for the corresponding reaction pathways. Computations show that the σ* orbitals of the bicyclo[n.1.0]alkane cis or trans C2-H bonds and spiro[2.5]octanes axial C4-H bond hyperconjugatively interact with the Walsh orbitals of the cyclopropane ring, activating these bonds toward HAT to ETFDO. The detection of rearranged oxygenation products in the oxidation of 1-methylbicyclo[4.1.0]heptane, spiro[2.5]octane, and 6-tert-butylspiro[2.5]octane provides unambiguous evidence for the involvement of cationic intermediates in these reactions, representing the first examples on the operation of ET pathways in dioxirane-mediated C(sp3)-H bond oxygenations. Computations support these findings, showing that formation of cationic intermediates is associated with specific stabilizing hyperconjugative interactions between the incipient carbon radical and the cyclopropane C-C bonding orbitals that trigger ET to the incipient dioxirane derived 1,1,1-trifluoro-2-hydroxy-2-butoxyl radical.

Molecular Dynamics of Iron Porphyrin-Catalyzed C-H Hydroxylation of Ethylbenzene

Quasi-classical molecular dynamics (MD) simulations were carried out to study the mechanism of iron porphyrin-catalyzed hydroxylation of ethylbenzene. The hydrogen atom abstraction from ethylbenzene by iron-oxo species is the rate-determining step, which generates the radical pair of iron-hydroxo species and the benzylic radical. In the subsequent radical rebound step, the iron-hydroxo species and benzylic radical recombine to form the hydroxylated product, which is barrierless on the doublet energy surface. In the gas-phase quasi-classical MD study on the doublet energy surface, 45% of the reactive trajectories lead directly to the hydroxylated product, and this increases to 56% in implicit solvent model simulations. The percentage of reactive trajectories leading to the separated radical pair is 98-100% on high-spin (quartet/sextet) energy surfaces. The low-spin state reactivity dominates in the hydroxylation of ethylbenzene, which is dynamically both concerted and stepwise, since the time gap between C-H bond cleavage and C-O bond formation ranges from 41 to 619 fs. By contrast, the high-spin state catalysis is an energetically stepwise process, which has a negligible contribution to the formation of hydroxylation products.

Synthesis of Isotopic Atropisomers Based on 12C/13C Discrimination

Quinazolin-4-one derivatives possessing an isotopic atropisomerism (isotopic N-C axial chirality) based on ortho-¹²CH₃/¹³CH₃ discrimination were prepared. The diastereomeric quinazolin-4-ones bearing an asymmetric carbon as well as an isotopic atropisomerism were clearly discriminated by ¹H and ¹³C NMR spectra and revealed to possess high rotational stability and stereochemical purity.

Nonheme Iron(III) Azide and Iron(III) Isothiocyanate Complexes: Radical Rebound Reactivity, Selectivity, and Catalysis

The new nonheme iron complexes FeII(BNPAPh2O)(N3) (1), FeIII(BNPAPh2O)(OH)(N3) (2), FeII(BNPAPh2O)(OH) (3), FeIII(BNPAPh2O)(OH)(NCS) (4), FeII(BNPAPh2O)(NCS) (5), FeIII(BNPAPh2O)(NCS)2 (6), and FeIII(BNPAPh2O)(N3)2 (7) (BNPAPh2O = 2-(bis((6-(neopentylamino)pyridin-2-yl) methyl)amino)-1,1-diphenylethanolate) were synthesized and characterized by single crystal X-ray diffraction (XRD), as well as by 1H NMR, 57Fe Mössbauer, and ATR-IR spectroscopies. Complex 2 was reacted with a series of carbon radicals, ArX3C· (ArX = p-X-C6H4), analogous to the proposed radical rebound step for nonheme iron hydroxylases and halogenases. The results show that for ArX3C· (X = Cl, H, tBu), only OH· transfer occurs to give ArX3COH. However, when X = OMe, a mixture of alcohol (ArX3COH) (30%) and azide (ArX3CN3) (40%) products was obtained. These data indicate that the rebound selectivity is influenced by the electron-rich nature of the carbon radicals for the azide complex. Reaction of 2 with Ph3C· in the presence of Sc3+ or H+ reverses the selectivity, giving only the azide product. In contrast to the mixed selectivity seen for 2, the reactivity of cis-FeIII(OH)(NCS) with the X = OMe radical derivative leads only to hydroxylation. Catalytic azidation was achieved with 1 as catalyst, λ3-azidoiodane as oxidant and azide source, and Ph3CH as test substrate, giving Ph3CN3 in 84% (TON = 8). These studies show that hydroxylation is favored over azidation for nonheme iron(III) complexes, but the nature of the carbon radical can alter this selectivity. If an OH· transfer pathway can be avoided, the FeIII(N3) complexes are capable of mediating both stoichiometric and catalytic azidation.

Asymmetric Synthesis of Isotopic Atropisomers based on ortho-CH3/CD3 Discrimination and Their Structural Properties

N-C axially chiral 3-(2-trideuteriomethyl-4,6-dimethylphenyl)-2-ethylquinazolin-4-ones and 3-(2-trideuteriomethyl-4,6-dimethylphenyl)-2-(1-phenylpropan-2-yl)quinazolin-4-ones were prepared in high enantio- and diastereomeric purities (98% ee). These quinazolinone derivatives are isotopic atropisomers based on ortho-CH₃/CD₃ discrimination and were revealed to possess a slight optical rotation and high rotational stability.

Enantioselective Synthesis of Enantioisotopomers with Quantitative Chiral Analysis by Chiral Tag Rotational Spectroscopy

Fundamental to the synthesis of enantioenriched chiral molecules is the ability to assign absolute configuration at each stereogenic center, and to determine the enantiomeric excess for each compound. While determination of enantiomeric excess and absolute configuration is often considered routine in many facets of asymmetric synthesis, the same determinations for enantioisotopomers remains a formidable challenge. Here, we report the first highly enantioselective metal-catalyzed synthesis of enantioisotopomers that are chiral by virtue of deuterium substitution along with the first general spectroscopic technique for assignment of the absolute configuration and quantitative determination of the enantiomeric excess of isotopically chiral molecules. Chiral tag rotational spectroscopy uses noncovalent chiral derivatization, which eliminates the possibility of racemization during derivatization, to perform the chiral analysis without the need of reference samples of the enantioisotopomer.

C(sp3)-H oxidation and chlorination catalysed by a bioinspired pincer iron(III) complex

A pincer iron(III) catalyst for the oxidation and chlorination of C(sp³)-H bonds was developed. Oxidation of a diagnostic substrate cis-decalin implies that a long-lived carbon-centred radical is involved. Mechanistic studies suggest that an Fe-oxo species could be responsible for the rate-determining C-H activation step. This report expands the scope of non-heme catalysts for C-H functionalisation.

Resolving Oxygenation Pathways in Manganese-Catalyzed C(sp3)-H Functionalization via Radical and Cationic Intermediates

The C(sp³)–H bond oxygenation of the cyclopropane-containing mechanistic probes 6-tert-butylspiro[2.5]octane and spiro[2.5]octane with hydrogen peroxide catalyzed by manganese complexes bearing aminopyridine tetradentate ligands has been studied. Mixtures of unrearranged and rearranged oxygenation products (alcohols, ketones, and esters) are obtained, suggesting the involvement of cationic intermediates and the contribution of different pathways following the initial hydrogen atom transfer-based C–H bond cleavage step. Despite such a complex mechanistic scenario, a judicious choice of the catalyst structure and reaction conditions (solvent, temperature, and carboxylic acid) could be employed to resolve these oxygenation pathways, leading, with the former substrate, to conditions where a single unrearranged or rearranged product is obtained in good isolated yield. Taken together, the work demonstrates an unprecedented ability to precisely direct the chemoselectivity of the C–H oxidation reaction, discriminating among multiple pathways. In addition, these results conclusively demonstrate that stereospecific C(sp³)–H oxidation can take place via a cationic intermediate and that this path can become exclusive in governing product formation, expanding the available toolbox of aliphatic C–H bond oxygenations. The implications of these findings are discussed in the framework of the development of synthetically useful C–H functionalization procedures and the associated mechanistic features.

Mechanistic insights into the selectivity of norcarane oxidation by oxoMn(V) porphyrin complexes

OxoMn(V) porphyrin complexes perform competitive hydroxylation, desaturation, and radical rearrangement reactions using diagnostic substrate norcarane. Initial C-H cleavage proceeds through the two hydrogen abstraction steps from the two adjacent carbon on the norcarane, then the selective reaction is performed to generate various products. Using density functional theory calculations, we show that the hydroxylation and desaturation reactions are triggered by a rate-determining H-abstraction step, whereas the rate-determining step for the radical rearrangement is located at the rebound step ( TS2 ). We find that the  endo- 2  reaction is favorable over other reactions, which is consistent with the experimental result. Furthermore, the competitive pathways for norcarane oxidation depend on the non-covalent interaction between norcarane and porphyrin-ring, and orbital energy gaps between donor and acceptor orbitals because of stable or unstable acceptor orbital. The stereo- and regio-selectivities of norcarane oxidation are hardly sensitive to the zero-point energy and thermal free energy corrections.

Insights into the electronic structure and mechanism of norcarane hydroxylation by OxoMn(V) porphyrin complexes: A density functional theory study

Norcarane hydroxylation by neutral [PorMn(V)O-L] (L═OH^- , F^- ) and cationic [PorMn(V)O-L]⁺ (L═H₂ O, imidazole) oxoMn(V) porphyrin complex models has been investigated by density functional theory calculations to better understand the reaction mechanism and electronic structure. We found that the energy barriers of norcarane hydroxylation by cationic oxoMn(V) porphyrin complexes are lower than those by neutral oxoMn(V) porphyrin complexes. This indicates that cationic oxoMn(V) porphyrin complexes enhance norcarane hydroxylation compared with neutral oxoMn(V) porphyrin complexes. According to electronic structure analysis, in the C─H activation step, electron transfer occurs through initial interaction between the σ_CH and rich-oxygen π(Mn═O) orbitals to form real donor orbitals, followed by transfer to the acceptor π*(Mn═O) orbitals. Moreover, single electron shifts from norcarane (CH) to Mn atom during C─H activation. The positive charge of the cationic complex stabilizes the acceptor orbital more than the donor orbital, reducing the energy gap between these orbitals, thus lowering the reaction barrier.

Detection of Isotopic Atropisomerism Based on ortho-H/D Discrimination

Racemic and optically active 3-(2-deuteriophenyl)-2-(1-phenylpropan-2-yl)quinazoline-4-thiones were prepared. The nuclear magnetic resonance spectra clearly show that they exist as a 1:1 mixture of diastereomers due to the isotopic atropisomerism based on ortho-H/D discrimination (N-C axial chirality) and a chiral carbon.

Ruthenium-Catalyzed, Chemoselective and Regioselective Oxidation of Polyisobutene

Polyolefins are important commodity plastics, yet their lack of functional groups limits their applications. The functionalization of C-H bonds holds promise for incorporating functionalities into polymers of ethylene and linear α-olefins. However, the selective functionalization of polyolefins derived from branched alkenes, even monobranched, 1,1-substituted alkenes, has not been achieved. These polymers are less reactive, due to steric effects, and they are prone to chain scission that degrades the polymer. We report the chemoselective and regioselective oxidation of a commercially important polymer of a branched olefin, polyisobutene. A polyfluorinated ruthenium-porphyrin catalyst incorporates ketone units into polyisobutene at methylene positions without chain cleavage. The oxidized polymer is thermally stable, yet it undergoes programmed reactions and possesses enhanced wetting properties.

Insight into the Selective Methylene Oxidation Catalyzed by Mn(CF3-PDP)(SbF6)2/H2O2/CH2ClCO2H) System: A DFT Mechanistic Study

DFT study was employed to gain insight into methylene oxidation catalyzed by Mn(CF₃-PDP)(NCMe)₂ (SbF₆)₂/H₂O₂/HOAc^Cl(OAC^Cl ═OC(O)CH₂Cl). The active catalyst was characterized to be [Mn](O)OAc^Cl ([Mn]═Mn(CF₃-PDP)²⁺) which is generated via a sequence from [Mn] to [Mn]OH to [Mn]OAc^Cl to [Mn]OOH. With the active catalyst, the methylene group is sequentially oxidized to an alcohol and then to a carbonyl group via rebound mechanism. The mechanism explains the observed site selectivity.

A mechanistic study of the manganese porphyrin-catalyzed C–H isocyanation reaction

The favourable radical rebound pathway is NCO-rebound from the Mn(TMP)(NCO)₂ complex due to the stronger trans effect of the axial ligand NCO and the electron-donating aryl substituents on the porphyrin ligand.

Computational Studies on the Mechanism and Origin of the Different Regioselectivities of Manganese Porphyrin-Catalyzed C-H Bond Hydroxylation and Amidation of Equilenin Acetate

The manganese porphyrin-catalyzed C-H bond hydroxylation and amidation of equilenin acetate developed by Breslow and his co-worker have been investigated with density functional theory (DFT) calculations. The hydroxylation of C(sp²)-H bond of equilenin acetate leading to the 6-hydroxylated product is more favorable than the hydroxylation of C(sp³)-H bond of equilenin acetate, leading to the 11β-hydroxylation product. The computational results suggest that the C(sp²)-H bond hydroxylation of equilenin acetate undergoes an oxygen-atom-transfer mechanism, which is more favorable than the C(sp³)-H bond hydroxylation undergoing the hydrogen-atom-abstraction/oxygen-rebound (HAA/OR) mechanism by 1.6 kcal/mol. That is why, the 6-hydroxylated product is the major product and the 11β-hydroxylated product is the minor product. In contrast, the 11β-amidated product is the only observed product in manganese porphyrin-catalyzed amidation reaction. The benzylic amidation undergoes a hydrogen-atom-abstraction/nitrogen-rebound (HAA/NR) mechanism, in which hydrogen atom abstraction is followed by nitrogen rebound, leading to the 11β-amidated product. The benzylic C(sp³)-H bond amidation at the C-11 position is more favorable than aromatic amidation at the C-6 position by 4.9 kcal/mol. Therefore, the DFT computational results are consistent with the experiments that manganese porphyrin-catalyzed C-H bond hydroxylation and amidation of equilenin acetate have different regioselectivities.

Site- and Enantiodifferentiating C(sp3)-H Oxidation Enables Asymmetric Access to Structurally and Stereochemically Diverse Saturated Cyclic Ethers

A manganese-catalyzed site- and enantiodifferentiating oxidation of C(sp³)-H bonds in saturated cyclic ethers has been described. The mild and practical method is applicable to a range of tetrahydrofurans, tetrahydropyrans, and medium-sized cyclic ethers with multiple stereocenters and diverse substituent patterns in high efficiency with extremely efficient site- and enantiodiscrimination. Late-stage application in complex biological active molecules was further demonstrated. Mechanistic studies by combined experiments and computations elucidated the reaction mechanism and origins of stereoselectivity. The ability to employ ether substrates as the limiting reagent, together with a broad substrate scope, and a high level of chiral recognition, represent a valuable demonstration of the utility of asymmetric C(sp³)-H oxidation in complex molecule synthesis.

Hydroxyl Transfer to Carbon Radicals by Mn(OH) vs Fe(OH) Corrole Complexes

The transfer of •OH from metal-hydroxo species to carbon radicals (R•) to give hydroxylated products (ROH) is a fundamental process in metal-mediated heme and nonheme C-H bond oxidations. This step, often referred to as the hydroxyl "rebound" step, is typically very fast, making direct study of this process challenging if not impossible. In this report, we describe the reactions of the synthetic models M(OH)(ttppc) (M = Fe (1), Mn (3); ttppc = 5,10,15-tris(2,4,6-triphenyl)phenyl corrolato^3-) with a series of triphenylmethyl carbon radical (R•) derivatives ((4-X-C₆H₄)₃C•; X = OMe, tBu, Ph, Cl, CN) to give the one-electron reduced M^III(ttppc) complexes and ROH products. Rate constants for 3 for the different radicals ranged from 11.4(1) to 58.4(2) M^-1 s^-1, as compared to those for 1, which fall between 0.74(2) and 357(4) M^-1 s^-1. Linear correlations for Hammett and Marcus plots for both Mn and Fe were observed, and the small magnitudes of the slopes for both correlations imply a concerted •OH transfer reaction for both metals. Eyring analyses of reactions for 1 and 3 with (4-X-C₆H₄)₃C• (X = tBu, CN) also give good linear correlations, and a comparison of the resulting activation parameters highlight the importance of entropy in these •OH transfer reactions. Density functional theory calculations of the reaction profiles show a concerted process with one transition state for all radicals investigated and help to explain the electronic features of the OH rebound process.

Enantioselective oxygenation of exocyclic methylene groups by a manganese porphyrin catalyst with a chiral recognition site

The natural enzyme cytochrome P450 is widely recognised for its unique ability to catalyse highly selective oxygen insertion reactions into unactivated C–H bonds under mild conditions. Its exceptional potential for organic synthesis served as an inspiration for the presented biomimetic hydroxylation approach. Via a remote hydrogen bonding motif a high enantioselectivity in the manganese-catalysed oxygenation of quinolone analogues (27 examples, 18–64% yield, 80–99% ee) was achieved. The site-selectivity was completely altered in favour of a less reactive but more accessible position.

A Mn porphyrin complex with a remote hydrogen bonding motif induces a high enantioselectivity in the oxygenation of 3-alkylquinolones. Compared to an achiral Mn complex, the site-selectivity was completely altered in favour of less reactive methylene groups.

Computational Exploration of Chiral Iron Porphyrin-Catalyzed Asymmetric Hydroxylation of Ethylbenzene Where Stereoselectivity Arises from π-π Stacking Interaction

The mechanism and origins of stereoselectivity of chiral iron porphyrin-catalyzed asymmetric hydroxylation of ethylbenzene were explored with density functional theory. The hydrogen atom abstraction is the rate- and stereoselectivity-determining step. In good agreement with experimental results, the formation of the (R)-1-phenylethanol product is found to be the most favorable pathway. The transition state of hydrogen atom abstraction which leads to the (S)-1-phenylethanol product is unfavorable by 1.7 kcal/mol compared to the corresponding transition state which leads to the (R)-1-phenylethanol product. Enantioselectivity arises from an attractive π-π stacking interaction between the phenyl group of ethylbenzene substrate and the naphthyl group of the porphyrin ligand.

Heme and Nonheme High-Valent Iron and Manganese Oxo Cores in Biological and Abiological Oxidation Reactions

Utilization of O₂ as an abundant and environmentally benign oxidant is of great interest in the design of bioinspired synthetic catalytic oxidation systems. Metalloenzymes activate O₂ by employing earth-abundant metals and exhibit diverse reactivities in oxidation reactions, including epoxidation of olefins, functionalization of alkane C-H bonds, arene hydroxylation, and syn-dihydroxylation of arenes. Metal-oxo species are proposed as reactive intermediates in these reactions. A number of biomimetic metal-oxo complexes have been synthesized in recent years by activating O₂ or using artificial oxidants at iron and manganese centers supported on heme or nonheme-type ligand environments. Detailed reactivity studies together with spectroscopy and theory have helped us understand how the reactivities of these metal-oxygen intermediates are controlled by the electronic and steric properties of the metal centers. These studies have provided important insights into biological reactions, which have contributed to the design of biologically inspired oxidation catalysts containing earth-abundant metals like iron and manganese. In this Outlook article, we survey a few examples of these advances with particular emphasis in each case on the interplay of catalyst design and our understanding of metalloenzyme structure and function.

Metal-free oxidative cross-dehydrogenative coupling of quinones with benzylic C(sp3)–H bonds

A metal-free cross-dehydrogenative coupling of quinones with toluene derivatives has been established. A series of quinones were subjected to reaction with toluene derivatives in the presence of di-tertbutyl peroxide (DTBP) for direct synthesis of benzylquinones. The method exhibits good functional group tolerance, and desired products were obtained in moderate to good yields. Meanwhile, a radical pathway was proposed to describe the cross-dehydrogenative coupling of quinones with toluene derivatives.

A metal-free cross-dehydrogenative coupling of quinones with toluene derivatives has been established. A series of quinones were subjected to reaction with toluene derivatives in the presence of DTBP for direct synthesis of benzylquinones.

Nickel-Catalyzed Alkylarylation of Activated Alkenes with Benzyl-amines via C-N Bond Activation

A nickel-catalyzed alkylarylation of active alkenes with tertiary benzylamines was achieved by charge-transfer-complex promoted C-N bond activation. The reaction proceeded through initial Ni-catalyzed C-N bond activation, followed by sequential radical addition, redox and proton abstraction with cleaved amine moiety in the absence of oxidant, and provides an efficient method to prepare various alkyl-substituted oxindoles and dihydroquinolinones in good yields.

Oxygen Activation and Radical Transformations in Heme Proteins and Metalloporphyrins

As a result of the adaptation of life to an aerobic environment, nature has evolved a panoply of metalloproteins for oxidative metabolism and protection against reactive oxygen species. Despite the diverse structures and functions of these proteins, they share common mechanistic grounds. An open-shell transition metal like iron or copper is employed to interact with O2 and its derived intermediates such as hydrogen peroxide to afford a variety of metal-oxygen intermediates. These reactive intermediates, including metal-superoxo, -(hydro)peroxo, and high-valent metal-oxo species, are the basis for the various biological functions of O2-utilizing metalloproteins. Collectively, these processes are called oxygen activation. Much of our understanding of the reactivity of these reactive intermediates has come from the study of heme-containing proteins and related metalloporphyrin compounds. These studies not only have deepened our understanding of various functions of heme proteins, such as O2 storage and transport, degradation of reactive oxygen species, redox signaling, and biological oxygenation, etc., but also have driven the development of bioinorganic chemistry and biomimetic catalysis. In this review, we survey the range of O2 activation processes mediated by heme proteins and model compounds with a focus on recent progress in the characterization and reactivity of important iron-oxygen intermediates. Representative reactions initiated by these reactive intermediates as well as some context from prior decades will also be presented. We will discuss the fundamental mechanistic features of these transformations and delineate the underlying structural and electronic factors that contribute to the spectrum of reactivities that has been observed in nature as well as those that have been invented using these paradigms. Given the recent developments in biocatalysis for non-natural chemistries and the renaissance of radical chemistry in organic synthesis, we envision that new enzymatic and synthetic transformations will emerge based on the radical processes mediated by metalloproteins and their synthetic analogs.

Remarkable increase in the rate of the catalytic epoxidation of electron deficient styrenes through the addition of Sc(OTf)3 to the MnTMTACN catalyst

Sc(OTf)₃ produces a remarkable enhancement in the activity of the MnTMTACN catalyst in the epoxidation of electron deficient styrenes.