Methanol on Anatase TiO2 (101): Mechanistic Insights into Photocatalysis

Photocatalytic Synthesis of Glycine from Methanol and Nitrate

Photocatalytic utilization of methanol and nitrate as carbon and nitrogen sources for the direct synthesis of amino acids could provide a sustainable way for the valorization of green "liquid sunlight" and nitrate waste. In this study, we develop an efficient photochemical method to synthesize glycine directly from methanol and nitrate, which cascades the C-C coupling to form glycol, nitrate reduction to NH3, and finally C-N coupling to generate glycine. Interestingly, the involved photocatalytic tandem reactions show a synergistic effect, in which the presence of nitrate is the dominant factor to enable the overall reaction and reach high synthetic efficiency. Ba2+-TiO2 nanoparticles are confirmed as a feasible and efficient catalyst system for the photosynthesis of glycine with a remarkable glycine photosynthesis rate of 870 μmol gcat -1 h-1 under optimal conditions. This work establishes a novel catalytic system for amino acid synthesis from methanol and nitrate under mild conditions. These results also allow us to further suppose the formation pathways of amino acids on the primitive earth, as an extension to proposals based on the Miller-Urey experiments.

Heterogeneous Photocatalytic Strategies for C(sp3 )-H Activation

Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.

Ab initio molecular dynamics of solvation effects and reactivity at the interface between water and ascorbic acid covered anatase TiO2 (101)

In this work, we present a detailed study of the interaction between ascorbic acid (L-asc) and anatase TiO2 (101) surface both in gas phase and in contact with water by using density functional theory and ab initio molecular dynamics simulations. In gas phase, L-asc strongly binds the TiO2 (101) surface as a dianion (L-asc2- ), adopting a bridging bidentate coordination mode (BB), with the two acid protons transferred to two surface 2-fold bridging oxygens (O2c). AIMD simulations show that the interaction between the organic ligand and the anatase surface is stable and comparable to the vacuum one despite the possible solvent effects and/or possible structural distortions of the ligand. In addition, during the AIMD simulations hydroxylation phenomena occur forming transient H3 O+ ions at the solid-liquid interface. For the first time, our results provide insight into the role of the ascorbic acid on the electronic properties of the TiO2 (101), the influence of the water environment on the ligand-surface interaction and the nature of the solid-liquid interface.

Indirect daylight oxidative degradation of polyethylene microplastics by a bio-waste modified TiO2-based material

Microplastics are recognized as an emerging critical issue for the environment. Here an innovative chemical approach for the treatment of microplastics is proposed, based on an oxidative process that does not require any direct energy source (irradiation or heat). Linear low-density polyethylene (LLDPE) was selected as target commodity polymer, due to its widespread use, chemical inertness and inefficient recycling. This route is based on a hybrid material coupling titanium oxide with a bio-waste, rosin, mainly constituted by abietic acid, through a simple sol-gel synthesis procedure. The ligand-to-metal charge transfer complexes formed between rosin and Ti4+ allow the generation of reactive oxygen species without UV irradiation for its activation. In agreement with theorical calculations, superoxide radical ions are stabilized at ambient conditions on the surface of the hybrid TiO2. Consequently, an impressive degradation of LLDPE is observed after 1 month exposure in a batch configuration under indirect daylight, as evidenced by the products revealed by gas chromatography-mass spectrometry analysis and by chemical and structural modifications of the polymer surface. In a context of waste exploitation, this innovative and sustainable approach represents a promising cost-effective strategy for the oxidative degradation of microplastics, without producing any toxic by-products.

Investigating the role of undercoordinated Pt sites at the surface of layered PtTe2 for methanol decomposition

Transition metal dichalcogenides, by virtue of their two-dimensional structures, could provide the largest active surface for reactions with minimal materials consumed, which has long been pursued in the design of ideal catalysts. Nevertheless, their structurally perfect basal planes are typically inert; their surface defects, such as under-coordinated atoms at the surfaces or edges, can instead serve as catalytically active centers. Here we show a reaction probability > 90 % for adsorbed methanol (CH3OH) on under-coordinated Pt sites at surface Te vacancies, produced with Ar+ bombardment, on layered PtTe2 - approximately 60 % of the methanol decompose to surface intermediates CHxO (x = 2, 3) and 35 % to CHx (x = 1, 2), and an ultimate production of gaseous molecular hydrogen, methane, water and formaldehyde. The characteristic reactivity is attributed to both the triangular positioning and varied degrees of oxidation of the under-coordinated Pt at Te vacancies.

Ecofriendly alkali metal cations diffusion improves fabrication of mixed-phase titania polymorphs on fixed substrate by chemical vapor deposition (CVD) for photocatalytic degradation of azo dye

Controlling the nanoscale synthesis of semiconductor TiO2 on a fixed substrate has fascinated the curiosity of academics for decades. Synthesis development is required to give an easy-to-control technique and parameters for TiO2 manufacture, leading to advancements in prospective applications such as photocatalysts. This study, mixed-phase TiO2(B)/other titania thin films were synthesized on a fused quartz substrate utilizing a modified Chemical vapor depodition involving alkali-metal ions (Li+, Na+, and K+) solution pre-treatment. It was discovered that different cations promote dramatically varied phases and compositions of thin films. The films had a columnar structure with agglomerated irregular-shaped particles with a mean thickness of 800-2000 nm. Na+ ions can promote TiO2(B) more effectively than K+ ions, however Li+ ions cannot synthesize TiO2(B). The amounts of TiO2(B) in thin films increase with increasing alkali metal (K+ and Na+) concentration. According to experimental and DFT calculations, the hypothesized TiO2(B) production mechanism happened via the meta-stable intermediate alkaline titanate transformation caused by alkali-metal ion diffusion. The mixed phase of TiO2(B) and anatase TiO2 on the fixed substrate (1 × 1 cm2) obtained from Na+ pre-treated procedures showed significant photocatalytic activity for the degradation of methylene blue. K2Ti6O12, Li2TiO3, Rutile TiO2, and Brookite TiO2 phase formations produced by K+ and Li + pretreatment are low activity photocatalysts. Photocatalytic activities were more prevalent in NaOH pre-treated samples (59.1% dye degradation) than in LiOH and KOH pre-treated samples (49.6% and 34.2%, respectively). This revealed that our developed CVD might generate good photocatalytic thin films of mixed-phase TiO2(B)/anatase TiO2 on any substrate, accelerating progress in future applications.

Photo-induced enhanced Raman spectroscopy as a probe for photocatalytic surfaces

Photo-induced enhanced Raman spectroscopy (PIERS) has emerged as a highly sensitive surface-enhanced Raman spectroscopy (SERS) technique for the detection of ultra-low concentrations of organic molecules. The PIERS mechanism has been largely attributed to UV-induced formation of surface oxygen vacancies (Vo) in semiconductor materials, although alternative interpretations have been suggested. Very recently, PIERS has been proposed as a surface probe for photocatalytic materials, following Vo formation and healing kinetics. This work establishes comparison between PIERS and Vo-induced SERS approaches in defected noble-metal-free titanium dioxide (TiO2-x) films to further confirm the role of Vo in PIERS. Upon application of three post-treatment methods (namely UV-induction, vacuum annealing and argon etching), correlation of Vo kinetics and distribution could be established. A proposed mechanism and further discussion on PIERS as a probe to explore photocatalytic materials are also presented. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

The Role of Surface Hydroxyls in the Mobility of Carboxylates on Surfaces: Dynamics of Acetate on Anatase TiO2(101)

The dynamics of reactive intermediates are important in catalysis for understanding transient species, which can drive reactivity and the transport of species to reaction centers. In particular, the interplay between surface-bound carboxylic acids and carboxylates is important for numerous chemical transformations, including CO₂ hydrogenation and ketonization. Here, we investigate the dynamics of acetic acid on anatase TiO₂(101) using scanning tunneling microscopy experiments and density functional theory calculations. We demonstrate the concomitant diffusion of bidentate acetate and a bridging hydroxyl and provide evidence for the transient formation of molecular monodentate acetic acid. The diffusion rate is strongly dependent on the position of hydroxyl and adjacent acetate(s). A facile three-step diffusion process is proposed consisting of acetate and hydroxyl recombination, acetic acid rotation, and acetic acid dissociation. This study clearly demonstrates that the dynamics of bidentate acetate could be important in forming monodentate species, which are proposed to drive selective ketonization.

A Novel High-Energy Vacuum Ultraviolet Light Photofunctionalization Approach for Decomposing Organic Molecules around Titanium

Titanium undergoes biological aging, represented by increased hydrophobicity and surface accumulation of organic molecules over time, which compromises the osseointegration of dental and orthopedic implants. Here, we evaluated the efficacy of a novel UV light source, 172 nm wavelength vacuum UV (VUV), in decomposing organic molecules around titanium. Methylene blue solution used as a model organic molecule placed in a quartz ampoule with and without titanium specimens was treated with four different UV light sources: (i) ultraviolet C (UVC), (ii) high-energy UVC (HUVC), (iii) proprietary UV (PUV), and (iv) VUV. After one minute of treatment, VUV decomposed over 90% of methylene blue, while there was 3-, 3-, and 8-fold more methylene blue after the HUVC, PUV, and UVC treatments, respectively. In dose-dependency experiments, maximal methylene blue decomposition occurred after one minute of VUV treatment and after 20-30 min of UVC treatment. Rapid and effective VUV-mediated organic decomposition was not influenced by the surface topography of titanium or its alloy and even occurred in the absence of titanium, indicating only a minimal photocatalytic contribution of titanium dioxide to organic decomposition. VUV-mediated but not other light source-mediated methylene blue decomposition was proportional to its concentration. Plastic tubes significantly reduced methylene blue decomposition for all light sources. These results suggest that VUV, in synergy with quartz ampoules, mediates rapid and effective organic decomposition compared with other UV sources. This proof-of-concept study paves the way for rapid and effective VUV-powered photofunctionalization of titanium to overcome biological aging.

Conversion of Alcohols on Stoichiometric and Reduced Rutile TiO2 (110): Point Defects Meet Bifunctionality in Oxide (Photo-)Chemistry

Oxidic (photo-)catalysts have the potential to play an important role to efficiently implement sustainable feedstocks and green energy sources into future energy technologies. They may be used not only for solar energy harvesting, but also for hydrogen production or being essential for the fabrication of fine chemicals. Therefore, it is crucial to develop a detailed understanding of how the atomistic environment of the catalyst can be designed in order to promote distinct reaction pathways to influence the final product distribution of chemical reactions. In this perspective article, we survey the surface (photo-)chemistry of methanol on rutile TiO2 surfaces and hybrid catalysts based thereon. Especially the role of the surface bifunctionality by Lewis acidic and basic sites combined with the strong impact of point defects such as reduced titanium sites (mainly Ti3+ interstitials) shall be illuminated. It is shown how the selective activation of either O–H, C–H or C–O bonds in the methanol molecule can be used to tune not only the overall conversion, but to switch between oxidative and reductive routes in favor of either deoxygenation, partial oxidation or C–C coupling reactions. Especially the latter ones are of particular interest to introduce methanol from green sources such as biomass as a sustainable feedstock into already existing petrochemical technologies.

Graphical Abstract

Coordination environment tuning of nickel sites by oxyanions to optimize methanol electro-oxidation activity

To achieve zero-carbon economy, advanced anode catalysts are desirable for hydrogen production and biomass upgrading powered by renewable energy. Ni-based non-precious electrocatalysts are considered as potential candidates because of intrinsic redox attributes, but in-depth understanding and rational design of Ni site coordination still remain challenging. Here, we perform anodic electrochemical oxidation of Ni-metalloids (NiP_x, NiS_x, and NiSe_x) to in-situ construct different oxyanion-coordinated amorphous nickel oxyhydroxides (NiOOH-TO_x), among which NiOOH-PO_x shows optimal local coordination environment and boosts electrocatalytic activity of Ni sites towards selective oxidation of methanol to formate. Experiments and theoretical results demonstrate that NiOOH-PO_x possesses improved adsorption of OH* and methanol, and favors the formation of CH₃O* intermediates. The coordinated phosphate oxyanions effectively tailor the d band center of Ni sites and increases Ni-O covalency, promoting the catalytic activity. This study provides additional insights into modulation of active-center coordination environment via oxyanions for organic molecules transformation.

Coordination environments around metal sites are important in electrocatalysis. Here, Ni metalloid oxidation produces oxyanion doped amorphous Ni-oxyhydroxides where substitution with phosphorus is found to boost methanol electrooxidation activity.

Al@TiO2 Core-Shell Nanoparticles for Plasmonic Photocatalysis

Plasmon-induced photocatalysis is a topic of rapidly increasing interest, due to its potential for substantially lowering reaction barriers and temperatures and for increasing the selectivity of chemical reactions. Of particular interest for plasmonic photocatalysis are antenna-reactor nanoparticles and nanostructures, which combine the strong light-coupling of plasmonic nanostructures with reactors that enhance chemical specificity. Here, we introduce Al@TiO₂ core-shell nanoparticles, combining earth-abundant Al nanocrystalline cores with TiO₂ layers of tunable thickness. We show that these nanoparticles are active photocatalysts for the hot electron-mediated H₂ dissociation reaction as well as for hot hole-mediated methanol dehydration. The wavelength dependence of the reaction rates suggests that the photocatalytic mechanism is plasmonic hot carrier generation with subsequent transfer of the hot carriers into the TiO₂ layer. The Al@TiO₂ antenna-reactor provides an earth-abundant solution for the future design of visible-light-driven plasmonic photocatalysts.

DFT Investigation of Substitutional and Interstitial Nitrogen-Doping Effects on a ZnO(100)-TiO2(101) Heterojunction

Density Functional Theory (DFT) calculations have been performed to investigate the structural and electronic properties of the ZnO(wurtzite)-ATiO2(anatase) heterojunction in the absence and presence of substitutional, interstitial nitrogen (N) doping and oxygen vacancies (OV). We report a detailed study of the interactions between the two nonpolar ZnO and TiO2 surfaces and on the role of N-doping and oxygen vacancies, which are decisive for improving the photocatalytic activity of the heterojunction. Our calculations show that substitutional N-doping is favored in the ATiO2 portion, whereas the interstitial one is favored in the ZnO region of the interface. Both substitutional and interstitial N-doped sites (i) induce gap states that act as deep electronic traps improving the charge separation and delaying electron-hole recombination, (ii) facilitate the OV formation causing a decrease in the formation energy (E FORM), and (iii) do not affect the band alignment when compared to the undoped analogue system. The presented results shed light on the N-doping effect on the electronic structure of the ZnO(100)-TiO2(101) heterojunction and how N-doping improves its photocatalytic properties.

Photodegradation and kinetics of edible oil refinery wastewater using titanium dioxide

Edible oil refinery wastewater (EORW) is one source of environmental pollution in Nigeria. The treatment of EORW before discharge into the environment remains a significant challenge in the edible oil refinery industries. This research was aimed at photocatalytic treatment of EORW using a batch photocatalytic reactor with titanium dioxide photocatalyst. We investigated the physicochemical parameters: chemical oxygen demand (COD), biological oxygen demand (BOD5), oil and grease, phenol, chloride (Cl-), total suspended solids, sulfate (SO42-), and phosphate (PO43-) using American Public Health Association methods. The results showed that the reduction efficiency of the treated EORW with TiO2 catalyst ranged between 65.8% (PO43-) and 87.0% (COD), and the improvement in efficiency was 54.1% (pH) and 60.8% dissolved oxygen. However, the results showed no significant difference (p<0.05) in the control treatment without catalyst. The biodegradability of EORW increased from 0.196 to 0.32. It was observed that the optimum values were an initial EORW concentration of 100 mL/L, irradiation time of 90min, catalyst dose of 1.25 g/L, and an agitation speed of 900 rpm. The kinetics of the photodegradation process was well described by the pseudo-first-order equation (R2>0.96) and pseudo-second-order equation (R2>0.98). The intra-particle diffusion model fairly represented the diffusion mechanism with an R2 value of 0.806. The treated EORW met the most acceptable water quality standards for discharged effluent according to the maximum permissible limits of the Nigerian National Environmental Standards and Regulations Enforcement Agency.

High-Efficiency Photocatalytic Degradation of Tannic Acid Using TiO2 Heterojunction Catalysts

Photocatalysts have been extensively used for hydrogen evolution or organic degradation. In this work, two different heterojunction types of composite photocatalysts, 1T-MoS₂@TiO₂ with Schottky heterojunction and 2H-MoS₂@TiO₂ with type-II heterojunction, are synthesized via hydrothermal synthesis. These two composite materials exhibit excellent photocatalytic activity toward the degradation of tannic acid, which is a typical organic in nuclear wastewater. At an optimal loading of 16% 1T-MoS₂, the 1T-MoS₂@TiO₂ shows the highest degradation capacity of 98%, which is 3.2 times higher than that of pure TiO₂. The degradation rate of 16% 1T-MoS₂@TiO₂ is much higher than that of 13% 2H-MoS₂@TiO₂. The enhanced photocatalytic activity might be attributed to the improved charge transfer according to the mechanism investigation, supported by the X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) analyses. This work provides new opportunities for constructing highly efficient catalysts for nuclear waste disposal.

Pair Sites on Nodes of Metal-Organic Framework hcp UiO-66 Catalyze tert-Butyl Alcohol Dehydration

On metal oxide cluster nodes of metal-organic frameworks (MOFs), sites not bonded to linkers (e.g., defects and structural vacancies) control reactivity and catalysis. Attention has been focused on isolated, individual sites, but pair sites have been largely overlooked. We now show that the MOF hcp UiO-66, which incorporates dimeric Zr₆O₈ nodes bridged by μ₂-OH groups, is an excellent platform for identifying and controlling adjacent sites consisting of OH groups and Zr⁴⁺ sites, which catalyze tert-butyl alcohol dehydration much more rapidly than isolated single sites.

Cu Nanocluster-Loaded TiO2 Nanosheets for Highly Efficient Generation of CO-Free Hydrogen by Selective Photocatalytic Dehydrogenation of Methanol to Formaldehyde

Safe storage and transportation of H₂ is a fundamental requirement for its wide applications in the future. Controllable release of high-purity H₂ from a stable storage medium such as CH₃OH before use offers an efficient way of achieving this purpose. In our case, Cu nanoclusters uniformly dispersed onto (001) surfaces of TiO₂ nanosheets (TiO₂/Cu) are selectively prepared by thermal treatment of HKUST-1 loaded TiO₂ nanosheets. One of the TiO₂/Cu composites, TiO₂/Cu_50, exhibits remarkably high activity toward the selective dehydrogenation of CH₃OH to HCHO with a H₂ evolution rate of 17.8 mmol h^-1 per gram of catalyst within a 16-h photocatalytic reaction (quantum efficiency at 365 nm: 16.4%). Theoretical calculations reveal that interactions of Cu nanoclusters with TiO₂ could affect their electronic structures, leading to higher adsorption energy of CH₃OH at Ti sites and a lower barrier for the dehydrogenation of CH₃OH by the synergistic effect of Cu nanoclusters and TiO₂, and lower Gibbs free energy for desorption HCHO and H₂ as well.

Site Sensitivity of Interfacial Charge Transfer and Photocatalytic Efficiency in Photocatalysis: Methanol Oxidation on Anatase TiO2 Nanocrystals

Photocatalytic oxidation of methanol on various anatase TiO₂ nanocrystals was studied by in situ and time-resolved characterizations and DFT calculations. Surface site and resulting surface adsorbates affect the surface band bending/bulk-to-surface charge migration processes and interfacial electronic structure/interfacial charge transfer processes. TiO₂ nanocrystals predominantly enclosed by the {001} facets expose a high density of reactive fourfold-coordinated Ti sites (Ti_4c ) at which CH₃ OH molecules dissociate to form the CH₃ O adsorbate (CH₃ O(a)_Ti4c ). CH₃ O(a)_Ti4c localized density of states are almost at the valence band maximum of TiO₂ surface, facilitating the interfacial hole transfer process; CH₃ O(a)_Ti4c with a high coverage promotes upward surface band bending, facilitating bulk-to-surface hole migration. CH₃ O(a)_Ti4c exhibits the highest photocatalytic oxidation rate constant. TiO₂ nanocrystals enclosed by the {001} facets are most active in photocatalytic methanol oxidation.

Thermocatalytic hydrogen peroxide generation and environmental disinfection by Bi2Te3 nanoplates

The highly reactive nature of reactive oxygen species (ROS) is the basis for widespread use in environmental and health-related fields. Conventionally, there are only two kinds of catalysts used for ROS generation: photocatalysts and piezocatalysts. However, their usage has been limited due to various environmental and physical factors. To address this problem, herein, we report thermoelectric materials, such as Bi₂Te₃, Sb₂Te₃, and PbTe, as thermocatalysts which can produce hydrogen peroxide (H₂O₂) under a small surrounding temperature difference. Being the most prevalent environmental factors in daily life, temperature and related thermal effects have tremendous potential for practical applications. To increase the practicality in everyday life, bismuth telluride nanoplates (Bi₂Te₃ NPs), serving as an efficient thermocatalyst, are coated on a carbon fiber fabric (Bi₂Te₃@CFF) to develop a thermocatalytic filter with antibacterial function. Temperature difference induced H₂O₂ generation by thermocatalysts results in the oxidative damage of bacteria, which makes thermocatalysts highly promising for disinfection applications. Antibacterial activity as high as 95% is achieved only by the treatment of low-temperature difference cycles. The current work highlights the horizon-shifting impacts of thermoelectric materials for real-time purification and antibacterial applications.

Multifunctional Flexible SERS Sensor on a Fixate Gel Pad: Capturing, Derivation, and Selective Picogram Indirect Detection of Explosive 2,2',4,4',6,6'-Hexanitrostilbene

2,2',4,4',6,6'-Hexanitrostilbene (HNS) is an explosive with better explosion performance than the well-known 2,4,6-trinitrotoluene (TNT). Surprisingly, unlike other nitroaromatic explosives, there are limited reports regarding the detection of the HNS, let alone sensing reports on surface residues. In this work, a multifunctional flexible SERS sensor was proposed for the indirect detection of HNS based on the transparent fixate gel pads. The sticky and flexible gel pad can effectively collect any HNS surface residues. The inherent amine groups within the gel pad of which the main ingredient is polyurethane can react with HNS to form the orange Meisenheimer-alike complex. The modification of Ag NPs with halide ions was screened for the best SERS performance. KI-modified-citrate-reduced Ag NPs showed selective but enormous SERS enhancement for the HNS derivative. The detection of HNS in the solution phase was explored, and a linear range of 0.01-25 ppm was achieved. The lowest detectable amount (LDA) of HNS was found to be 50 pg, making it one of the most sensitive methods in literature. It was successfully utilized for the HNS residues sensing on fingerprints and bags with LDAs of 5 and 200 ng, respectively. In addition, other explosives including TATB, LLM-105, RDX, HMX, FOX-7, and TNT were also examined to assess the selectivity of the fixate. It was found that the fixate showed excellent selectivity for HNS.

Final-State Simulations of Core-Level Binding Energies at Metal-Organic Hybrid Interfaces: Artifacts Caused by Spurious Collective Electrostatic Effects

Core-level energies are frequently calculated to explain the X-ray photoelectron spectra of metal-organic hybrid interfaces. The current paper describes how such simulations can be flawed when modeling interfaces between physisorbed organic molecules and metals. The problem occurs when applying periodic boundary conditions to correctly describe extended interfaces and simultaneously considering core hole excitations in the framework of a final-state approach to account for screening effects. Since the core hole is generated in every unit cell, an artificial dipole layer is formed. In this work, we study methane on an Al(100) surface as a deliberately chosen model system for hybrid interfaces to evaluate the impact of this computational artifact. We show that changing the supercell size leads to artificial shifts in the calculated core-level energies that can be well beyond 1 eV for small cells. The same applies to atoms at comparably large distances from the substrate, encountered, for example, in extended, upright-standing adsorbate molecules. We also argue that the calculated work function change due to a core-level excitation can serve as an indication for the occurrence of such an artifact and discuss possible remedies for the problem.

Regulating Photochemical Selectivity with Temperature: Isobutanol on TiO2(110)

Selective photocatalytic transformations of chemicals derived from biomass, such as isobutanol, have been long envisioned for a sustainable chemical production. A strong temperature dependence in the reaction selectivity is found for isobutanol photo-oxidation on rutile TiO₂(110). The strong temperature dependence is attributed to competition between thermal desorption of the primary photoproduct and secondary photochemical steps. The aldehyde, isobutanal, is the primary photoproduct of isobutanol. At room temperature, isobutanal is obtained selectively from photo-oxidation because of rapid thermal desorption. In contrast, secondary photo-oxidation of isobutanal to propane dominates at lower temperature (240 K) due to the persistence of isobutanal on the surface after it is formed. The byproduct of isobutanal photo-oxidation is CO, which is evolved at higher temperature as a consequence of thermal decomposition of an intermediate, such as formate. The photo-oxidation to isobutanal proceeds after thermally induced isobutoxy formation. These results have strong implications for controlling the selectivity of photochemical processes more generally, in that, selectivity is governed by competition of desorption vs secondary photoreaction of products. This competition can be exploited to design photocatalytic processes to favor specific chemical transformations of organic molecules.

Recycling of titanium-coagulated algae-rich sludge for enhanced photocatalytic oxidation of phenolic contaminants through oxygen vacancy

In the 21st century, sludge disposal and resource recycling are global issues. Titanium coagulation has received increasing attention due its strong coagulation capability and sludge recycling. Titanium coagulation is highly efficient for the treatment of algae-laden micro-polluted surface water; however, the safe disposal of titanium-coagulated algae-rich sludge remains a challenge. Here, we report on the recycling of titanium-coagulated algae-rich sludge for the production of functional TiO₂ nanoflowers (TNFs) through a simple hydrothermal and calcination process. Anatase TNFs (particle size of 10-15 nm) with petal-like structures (mesoporous), relatively high specific surface areas, i.e. 299.4 m²g^-1, and low band gaps, i.e. 2.67 eV (compared to P-25), were obtained. Additionally, oxygen vacancy (OV) was generated on the surface of the recycled TNFs based on electron paramagnetic resonance (EPR) results, which were verified by the first-principles calculations within density-functional theory. These TNFs display high photocatalytic performance for the degradation of diverse phenolic organic contaminants, such as bisphenol A, diphenyl phenol, p-tert-butyl phenol, and resorcinol, i.e. > 95%, under mild ultraviolet light irradiation and without any sacrificial reagents. Formation of OV on TNFs not only efficiently inhibited the recombination of photo-generated electrons and holes but also facilitated contaminant adsorption and photo-generated electron transfer on the surface of the recycled TNFs, thereby promoting the generation of holes and hydroxyl and superoxide radicals which were regarded as the reactive oxygen species for attacking contaminants in the reactions. This study proposes a new perspective on recycling chemical-coagulated sludge for producing functional nanomaterials as photocatalysts.

Floating TiO2 photocatalyst for efficient inactivation of E. coli and decomposition of methylene blue solution

The anatase phase TiO₂ films with nanocrystalline structure were successfully deposited on a water-floating non-expanded polystyrene (PS) beads via magnetron sputtering. The combination of UVB light and PS beads with TiO₂ film was used for decomposition of methylene blue as well as inactivation tests for intact and EDTA-treated Escherichia coli bacteria. Crystal structure, elemental composition, elemental mapping, surface morphology and chemical bonds of TiO₂ film were investigated. E. coli inactivation experiments showed that such floating photocatalyst could destroy >90% bacteria in 45 min under UVB irradiation. Results demonstrated that combination of TiO₂ and UVB light leads to disruption of the outer membrane which causes effective inactivation of E. coli bacteria.

Surface chemistry of TiO2 connecting thermal catalysis and photocatalysis

Chemical reactions catalyzed under heterogeneous conditions have recently expanded rapidly from traditional thermal catalysis to photocatalysis due to the rising concerns about sustainable development of energy and the environment. Adsorption of reactants on catalyst surfaces, subsequent surface reactions, and desorption of products from catalyst surfaces occur in both thermal catalysis and photocatalysis. TiO₂ catalysts are widely used in thermal catalytic and photocatalytic reactions. Herein we review recent progress in surface chemistry, thermal catalysis and photocatalysis of TiO₂ model catalysts from single crystals to nanocrystals with the aim of examining if the surface chemistry of TiO₂ can bridge the fundamental understanding between thermal catalysis and photocatalysis. Following a brief introduction, the structures of major facets exposed on TiO₂ catalysts, including surface reconstructions and defects, as well as the electronic structure and charge properties, are firstly summarized; then the recent progress in adsorption, thermal chemistry and photochemistry of small molecules on TiO₂ single crystals and nanocrystals is comprehensively reviewed, focusing on manifesting the structure-(photo)activity relations and the commonalities/differences between thermal catalysis and photocatalysis; and finally concluding remarks and perspectives are given.

Recent Advancements in the Understanding of the Surface Chemistry in TiO2 Photocatalysis

Surface chemistry plays a major role in photocatalytic and photoelectrochemical processes taking place with the participation of TiO2. The synthesis methods, surface characterizations, theoretical research methods, and hardware over the last decade generated opportunities for progress in the surface science of this photocatalyst. Very recently, attention was paid to the design of photocatalysts at the nanoscale level by adjusting the types of exposed surfaces and their ratio, the composition and the surface structure of nanoparticles, and that of individual surfaces. The current theoretical methods provide highly detailed designs that can be embodied experimentally. The present review article describes the progress in the surface science of TiO2 and TiO2-based photocatalysts obtained over the last three years. Such aspects including the properties of macro- and nano-scale surfaces, noble-metal-loaded surfaces, doping with Mg and S, intrinsic defects (oxygen vacancies), adsorption, and photoreactions are considered. The main focus of the article is on the anatase phase of TiO2.

ZnSnO3–hBN nanocomposite-based piezocatalyst: ultrasound assisted reactive oxygen species generation for degradation of organic pollutants

Ultrasound assisted sustainable degradation of RhB by a lead-free ferroelectric ZnSnO₃–hBN piezocatalyst.

Fundamentals of TiO2 Photocatalysis: Concepts, Mechanisms, and Challenges

Photocatalysis has been widely applied in various areas, such as solar cells, water splitting, and pollutant degradation. Therefore, the photochemical mechanisms and basic principles of photocatalysis, especially TiO₂ photocatalysis, have been extensively investigated by various surface science methods in the last decade, aiming to provide important information for TiO₂ photocatalysis under real environmental conditions. Recent progress that provides fundamental insights into TiO₂ photocatalysis at a molecular level is highlighted. Insights into the structures of TiO₂ and the basic principles of TiO₂ photocatalysis are discussed first, which provides the basic concepts of TiO₂ photocatalysis. Following this, details of the photochemistry of three important molecules (oxygen, water, methanol) on the model TiO₂ surfaces are presented, in an attempt to unravel the relationship between charge/energy transfer and bond breaking/forming in TiO₂ photocatalysis. Lastly, challenges and opportunities of the mechanistic studies of TiO₂ photocatalysis at the molecular level are discussed briefly, as well as possible photocatalysis models.

Introducing catalysis in photocatalysis: What can be understood from surface science studies of alcohol photoreforming on TiO2

Mechanisms in heterogeneous photocatalysis have traditionally been interpreted by the band-structure model and analogously to electrochemistry. This has led to the establishment of 'band-engineering' as a leading principle for the discovery of more efficient photocatalysts. In such a picture, mainly thermodynamic aspects are taken into account, while kinetics are often ignored. This holds in particular for chemical kinetics, which are, other than those for charge carrier dynamics, often not at all considered for the interpretation of the catalysts' photocatalytic performance. However, while being usually neglected in photocatalyis, they are a traditional and powerful tool in thermal catalysis and are still applied with great success in this field. While surface science studies made substantial contributes to thermal catalysis, analogous studies in heterogeneous photocatalysis still play only a minor role. In this review, the authors show that the photo-physics of defined materials in well-defined environments can be correlated with photochemical events on a surface, highlighting the importance of well-characterized semiconductors for the interpretation of mechanisms in heterogeneous photochemistry. The work focuses on contributions from surface science, which were obtained for the model system of a titania single crystal and alcohol photo-reforming. It is demonstrated that only surface science studies have so far enabled the elucidation of molecularly precise reaction mechanisms, the determination of reaction intermediates and assignment of reactive sites. As the identification of these properties remain major prerequisites for a breakthrough in photocatalysis research, the work also discusses the implications of the findings for applied systems. In general, the results from surface science demonstrate that photocatalytic systems shall also be approached by a perspective originating from heterogeneous catalysis rather than solely from an electrochemical point of view.

Synergetic Effect of Facet Junction and Specific Facet Activation of ZnFe2O4 Nanoparticles on Photocatalytic Activity Improvement

Crystal facet engineering has been proved as a versatile approach in modulating the photocatalytic activity of semiconductors. However, the facet-dependent properties and underlying mechanisms of spinel ZnFe₂O₄ in photocatalysis still have rarely been explored. Herein, ZnFe₂O₄ nanoparticles with different {001} and {111} facets exposed were successfully synthesized via a facile hydrothermal method. Facet-dependent photocatalytic degradation performance toward gaseous toluene under visible light irradiation was observed, where truncated octahedral ZnFe₂O₄ (ZFO(T)) nanoparticles with both {001} and {111} facets exposed exhibited a superior performance than the others. The formed surface facet junction between {010} and {100} facets was responsible for the improved activity by separating photogenerated e^-/h⁺ pairs efficiently to reduce their recombination rate. Photogenerated electrons and holes were demonstrated to be immigrated onto {001} and {111} facets, separately. Intriguingly, electron paramagnetic resonance trapping results indicated that both ^•O₂^- and ^•OH were abundantly present in the ZFO(T) sample under visible light irradiation as major reactive oxygen species involved in the photocatalytic degradation process. Additionally, further investigation revealed that {001} facets played a predominant role in activating photogenerated transient species H₂O₂ into ^•OH, beneficially boosting the intrinsic photocatalytic activity. This work has not only presented a promising strategy in regulating photocatalytic performance through the synergetic effect of facet junction and specific facet activation but also broadened the application of facet engineering with multiple effects simultaneously cooperating.

Photocatalytic improvement of Y3+ modified TiO2 prepared by a ball milling method and application in shrimp wastewater treatment

Semiconductor photocatalysis is an advanced oxidation process driven by solar energy which has widespread applications in the treatment of organic pollutants in liquid and gas phases. In this work, titanium dioxide nanoparticles modified with yttrium ions (Y3+) were prepared by a ball milling method. The effects of Y3+ mole fraction, ball-to-powder weight ratio, milling time and milling rate on the photocatalytic activities were evaluated by the degradation of methylene blue (MB) under UV light. Then Y3+/TiO2 photocatalysts prepared at the optimized ball milling conditions were applied to treat shrimp wastewater under UV and visible light. Chemical oxygen demand (CODCr), 3D fluorescence spectroscopy and total organic carbon (TOC) were used to detect the water samples taken from the photocatalytic experiments. Experimental results showed that when the mole fraction was 2%, the ball-to-powder weight ratio was 4 : 1, milling time was 4 h and milling rate was 500 rpm, the reaction rate constant of MB degradation can reach up to 0.1112 min-1 which was 4.2 times as fast as pure TiO2. All Y3+/TiO2 samples showed a red shift of absorption compared to pure TiO2 and it led to a visible light absorption response. The content of surface oxygen vacancies has significantly increased and the BET specific area increased to 104 m2 g-1. The CODCr removal rates of shrimp wastewater were 43.8% and 37.5% for 2% Y3+/TiO2 under UV and visible light, respectively. Besides, the TOC removal rates were 67.5% and 38.8%, respectively. Humic-like substances and fulvic-like substances in shrimp wastewater can be mineralized after 90 minutes irradiation.

The Mechanism of Adsorption, Diffusion, and Photocatalytic Reaction of Organic Molecules on TiO2 Revealed by Means of On-Site Scanning Tunneling Microscopy Observations

The interaction of organic molecules and titanium dioxide (TiO2) plays a crucial role in many industry-oriented applications and an understanding of its mechanism can be helpful for the improvement of catalytic efficiency of TiO2. Scanning tunneling microscopy (STM) has been proved to be a powerful tool in characterizing reaction pathways due to its ability in providing on-site images during the catalytic process. Over the past two decades, many research interests have been focused on the elementary reaction steps, such as adsorption, diffusion, and photocatalytic reaction, occurring between organic molecules and model TiO2 surfaces. This review collects the recent studies where STM was utilized to study the interaction of TiO2 with three classes of representative organic molecules, i.e., alcohols, carboxylic acids, and aromatic compounds. STM can provide direct evidence for the adsorption configuration, diffusion route, and photocatalytic pathway. In addition, the combination of STM with other techniques, including photoemission spectroscopy (PES), temperature programmed desorption (TPD), and density functional theory (DFT), have been discussed for more insights related to organic molecules-TiO2 interaction.