Ir(III)-PC(sp3)P Bifunctional Catalysts for Production of H2 by Dehydrogenation of Formic Acid: Experimental and Theoretical Study

Formic Acid Dehydrogenation through Ligand Design Strategy of Amidation in Half-Sandwich Ir Complexes

A series of Cp*Ir (Cp* = pentamethylcyclopentadienyl) complexes with amidated 8-aminoquinoline ligands were synthesized and tested for formic acid (FA) dehydrogenation. These complexes showed improved activities compared to pristine 8-anminquinoline (L1). Specially, amidation changed the outer coordination sphere of the complex (3) bearing N-8-quinolinylformamide (L3), and 3 was proved to be a proton-responsive catalyst. Our experimental results and DFT calculations demonstrated that the deprotonated carbanion in L3 could interact with a water molecule to stabilize the transition states and lower the reaction energy barrier, which improved the reaction activity. A turnover frequency of 206250 h-1 was achieved by 3 under optimized conditions. This study presents a method to develop new ligands and modify the existing ligands for efficient FA dehydrogenation.

On the Demise of PPP-Ligated Iron Catalysts in the Formic Acid Dehydrogenation Reaction

The PPP-ligated iron complexes, cis-(iPrPPRP)FeH2(CO) [iPrPPRP = (o-iPr2PC6H4)2PR (R = H or Me)], catalyze the dehydrogenation of formic acid to carbon dioxide but lose their catalytic activity over time. This study focuses on the analysis of the species formed from the degradation of cis-(iPrPPMeP)FeH2(CO) over its course of catalyzing the dehydrogenation reaction. These degradation products include species both soluble and insoluble in the reaction medium. The soluble component of the decomposed catalyst is a mixture of cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x], protonated iPrPPMeP, and oxidation products resulting from adventitious O2. The precipitate is solvated Fe(OCHO)2. Further mechanistic investigation suggests that cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x] displays diminished but measurable catalytic activity, likely through the displacement of a CO ligand by the formate ion. The formation of Fe(OCHO)2 along with the dissociation of iPrPPMeP is responsible for the eventual loss of catalytic activity.

Hydrogenation of CO2 by a Bifunctional PC(sp3 )P Iridium(III) Pincer Complex Equipped with Tertiary Amine as a Functional Group

Reversible hydrogen storage in the form of stable and mostly harmless chemical substances such as formic acid (FA) is a cornerstone of a fossil fuels-free economy. In the past, we have reported a primary amine-functionalized bifunctional iridium(III)-PC(sp3 )P pincer complex as a mild and chemoselective catalyst for the additive-free decomposition of neat formic acid. In this manuscript, we report on the successful application of a redesigned complex bearing tertiary amine functionality as a catalyst for mild hydrogenation of CO2 to formic acid. The catalyst demonstrates TON up to 6×104 and TOF up to 1.7×104  h-1 . In addition to the practical value of the catalyst, experimental and computational mechanistic studies provide the rationale for the design of improved next-generation catalysts.

Iridium-(κ2-NSi) catalyzed dehydrogenation of formic acid: effect of auxiliary ligands on the catalytic performance

The iridium(III) complexes [Ir(H)(Cl)(κ²-NSi^tBu₂)(κ²-bipy^Me₂)] (2) and [Ir(H)(OTf)(κ²-NSi^tBu₂)(κ²-bipy^Me₂)] (3) (NSi^tBu₂ = {4-methylpyridine-2-yloxy}ditertbutylsilyl) have been synthesized and characterized including X-ray studies of 3. A comparative study of the catalytic activity of complexes 2, 3, [Ir(H)(OTf)(κ²-NSi^tBu₂)(coe)] (4), and [Ir(H)(OTf)(κ²-NSi^tBu₂)(PCy₃)] (5) (0.1 mol%) as catalysts precursors for the solventless formic acid dehydrogenation (FADH) in the presence of Et₃N (40 mol%) at 353 K has been performed. The highest activity (TOF_{5 min} ≈ 3260 h^-1) has been obtained with 3 at 373 K. However, at that temperature the FTIR spectra show traces of CO together with the desired products (H₂ and CO₂). Thus, the best performance was achieved at 353 K (TOF_{5 min} ≈ 1210 h^-1 and no observable CO). Kinetic studies at variable temperature show that the activation energy of the 3-catalyzed FADH process is 16.76 kcal mol^-1. Kinetic isotopic effect (5 min) values of 1.6, 4.5, and 4.2 were obtained for the 3-catalyzed dehydrogenation of HCOOD, DCOOH, and DCOOD, respectively, at 353 K. The strong KIE found for DCOOH and DCOOD evidenced that the hydride transfer from the C-H bond of formic acid to the metal is the rate-determining step of the process.

A ligand design strategy to enhance catalyst stability for efficient formic acid dehydrogenation

New Ir complexes bearing N-(methylsulfonyl)-2-pyridinecarboxamide (C1) and N-(phenylsulfonyl)-2-pyridinecarboxamide (C2) were employed as catalysts for aqueous formic acid dehydrogenation (FADH). The ligands were designed to maintain the picolinamide skeleton and introduce strong sigma sulfonamide moieties. C1 and C2 exhibited good stability towards air and concentrated formic acid (FA). During 20 continuous cycles, C1 and C2 could achieve the complete conversion of FA with TONs of 172 916 and 172 187, respectively. C1 achieved a high TOF of 19 500 h^-1 at 90 °C and an air-stable Ir-H species was observed by ¹H NMR spectroscopy.

Cyclometalated iridium complexes based on monodentate aminophosphanes

Monodentate aminophosphanes HNP [NH(4-tolyl)PPh₂] and SiMe₃NP [SiMe₃N(4-tolyl)PPh₂] react with [Ir(μ-Cl)(cod)]₂ affording tetra- or pentacoordinate complexes of formula [IrCl(L)_n(cod)] (L = HNP, n = 1, 2; L = SiMe₃NP, n = 1). The reaction of [IrCl(SiMe₃NP)(cod)] with carbon monoxide smoothly renders [Ir(CO)₃(SiMe₃NP)₂][IrCl₂(CO)₂]. The reaction of HNP or SiMe₃NP with [Ir(CH₃CN)₂(cod)][PF₆] yields the cyclometalated iridium(III)-hydride derivatives [IrH{κ²C,P-NR(4-C₆H₃CH₃)PPh₂}(cod)(CH₃CN)][PF₆] (R = H, SiMe₃) as a result of the intramolecular oxidative addition of the tolyl C²-H bond to iridium. The straighforward formation of [IrH{κ²C,P-SiMe₃N(4-C₆H₃CH₃)PPh₂}(cod)(CH₃CN)]⁺ was observed when the reaction was monitored by NMR spectroscopy at 233 K, whereas a more complex reaction sequence was observed in the formation of [IrH{κ²C,P-NH(4-C₆H₃CH₃)PPh₂}(cod)(CH₃CN)]⁺, including the formation of [IrH{κ²C,P-NH(4-C₆H₃CH₃)PPh₂}(HNP)(cod)]⁺ and [Ir(cod)(HNP)₂]⁺. The "mixed" complex [IrH{κ²C,P-SiMe₃N(4-C₆H₃CH₃)PPh₂}(HNP)(cod)]⁺ was obtained upon reaction of [IrH{κ²C,P-NH(4-C₆H₃CH₃)PPh₂}(cod)(CH₃CN)][PF₆] with SiMe₃NP at 233 K. Finally, the reaction of [Ir(CH₃CN)₂(coe)₂][PF₆] with SiMe₃NP or HNP resulted in the formation of [Ir(CH₃CN)₂(SiMe₃NP)₂][PF₆] and [IrH{κ²C,P-NH(4-C₆H₃CH₃)PPh₂}(HNP)₂(CH₃CN)][PF₆], respectively. Both the OC-6-35 and the OC-6-52 isomers of [IrH{κ²C,P-NH(4-C₆H₃CH₃)PPh₂}(HNP)₂(CH₃CN)]⁺ - featuring facial and meridional dispositions of the phosphorus atoms, respectively - were isolated depending on the reaction solvent. Several compounds described herein catalyse the dehydrogenation of formic acid in DMF, [IrCl(HNP)₂(cod)] being the most active, with TOF_{1 min} of about 2300 h^-1 (5 mol% catalyst, 50 mol% sodium formate, DMF, 80 °C).

Sustainable catalysis with fluxional acridine-based PNP pincer complexes

Because of the widespread use of fossil fuels and the resulting global warming, development of sustainable catalytic transformations is now more important than ever to obtain our desired fuels and building materials with the least carbon footprint and waste production. Many sustainable (de)hydrogenation reactions, including CO2 reduction, H2 carrier systems, and others, have been reported using molecular pincer complexes. A specific subset of pincer complexes containing a central acridine donor with flanking CH2PR2 ligands, known as acridine-based PNP pincer complexes, exhibit special reactivities that are not imitable by other PNP pincer complexes such as pyridine-based or (R2PCH2CH2)2NH type ligands. The goal of this article is to highlight the unique reactivities of acridine-based complexes and then investigate how these reactivities allow these complexes to catalyse many sustainable reactions that traditional pincer complexes cannot catalyse. To that end, we will initially go over the synthesis and structural features of acridine complexes, such as the labile coordination of the central N donor and the observed fac-mer fluxionality. Following that, distinct reactivity patterns of acridine-based complexes including their reactivity with acids and water will be discussed. Finally, we will discuss the reaction systems that have been developed with acridine complexes thus far, including the notable selective transformations of primary alcohols to primary amines using ammonia, N-heteroaromatic synthesis from alcohols and ammonia, oxidation reactions with water with H2 liberation, development of H2 carrier systems, and others, and conclude the article with future possible directions. We hope that the systemic study presented here will aid researchers in developing further sustainable reactions based on the unique acridine-based pincer complexes.

Recent Progress in Homogeneous Catalytic Dehydrogenation of Formic Acid

Recently, there has been a strong demand for technologies that use hydrogen as an energy carrier, instead of fossil fuels. Hence, new and effective hydrogen storage technologies are attracting increasing attention. Formic acid (FA) is considered an effective liquid chemical for hydrogen storage because it is easier to handle than solid or gaseous materials. This review presents recent advances in research into the development of homogeneous catalysts, primarily focusing on hydrogen generation by FA dehydrogenation. Notably, this review will aid in the development of useful catalysts, thereby accelerating the transition to a hydrogen-based society.

Dehydrogenation of Formic Acid Using Iridium-NSi Species as Catalyst Precursors

Using a low loading of the iridium(III) complexes [Ir(CF3SO3)(κ2-NSiiPr)2] (1) (NSiiPr = (4-methylpyridin-2-iloxy)diisopropylsilyl and [{Ir(κ2-NSiMe)2}2(µ-CF3SO3)2] (2) (NSiMe = (4-methylpyridin-2-iloxy)dimethylsilyl) in presence of Et3N, it has been possible to achieve the...

Formic acid dehydrogenation by [Ru(η6-benzene)(L)Cl] catalysts: L = 2-methylquinolin-8-olate and quinolin-8-olate

Two Ru-arene-based catalysts are employed for the dehydrogenation of formic acid. The mechanism has also been interpreted. The catalytic activity of the complexes was also compared with previously reported ruthenium arene complexes using manometry.

Efficient solventless dehydrogenation of formic acid by a CNC-based rhodium catalyst

A CNC based rhodium complex is an efficient catalyst for formic acid dehydrogenation under solventless conditions.

DFT Probe into the Mechanism of Formic Acid Dehydrogenation Catalyzed by Cp*Co, Cp*Rh, and Cp*Ir Catalysts with 4,4'-Amino-/Alkylamino-Functionalized 2,2'-Bipyridine Ligands

The mechanistic landscape of H₂ generation from formic acid catalyzed by Cp*M(III) complexes (M = Co or Rh or Ir) with diamino-/dialkylamino-substituted 2,2'-bipyridine ligand architectures have been unveiled computationally. The calculations indicate that the β-hydride elimination process is the rate-determining step for all the investigated catalysts. The dialkylamino moieties on the 2,2'-bipyridine ligand were found to reduce the activation free energy required for the rate-limiting β-hydride elimination step and increase the hydridic nature of the Ir-hydride bond, which accounts for the experimentally observed enhanced catalytic activity. Furthermore, the protonation by H₃O⁺ ion was found to be the kinetically most favorable route than the conventional protonation by formic acid. The origin for this preference lies in the increased electrophilicity of the proton from hydronium ion which facilitates easy protonation of the metal-hydride with low activation energy barrier. The Co and Rh analogues of the chosen iridium catalyst were computationally designed and were estimated to possess a rate-determining activation barrier of 16.9 and 14.5 kcal/mol, respectively. This illustrates that these catalysts are potential candidates for FAD. The insights derived in this work might serve as a vital knowledge that could be capitalized upon for designing cost-effective catalyst for FAD in future.

Alternative Conceptual Approach to the Design of Bifunctional Catalysts: An Osmium Germylene System for the Dehydrogenation of Formic Acid

The reaction of the hexahydride OsH₆(PⁱPr₃)₂ with a P,Ge,P-germylene-diphosphine affords an osmium tetrahydride derivative bearing a Ge,P-chelate, which arises from the hydrogenolysis of a P–C(sp³) bond. This Os(IV)–Ge(II) compound is a pioneering example of a bifunctional catalyst based on the coordination of a σ-donor acid, which is active in the dehydrogenation of formic acid to H₂ and CO₂. The kinetics of the dehydrogenation, the characterization of the resting state of the catalysis, and DFT calculations point out that the hydrogen formation (the fast stage) exclusively occurs on the coordination sphere of the basic metal center, whereas both the metal center and the σ-donor Lewis acid cooperatively participate in the CO₂ release (the rate-determining step). During the process, the formate group pivots around the germanium to approach its hydrogen atom to the osmium center, which allows its transfer to the metal and the CO₂ release.

An alternative class of bifunctional catalysts can be assembled by coordination of σ-donor Lewis acids to platinum-group-metal basic fragments. In contrast to what happens with the previously reported bifunctional catalysts, this design allows enhancing the basicity of the base and the acidity of the acid. According to this, a bifunctional catalyst for the dehydrogenation of formic acid, based on an osmium(IV)-germylene cooperative system, has been prepared and the mechanism of the catalysis established.

Advances in Nonprecious Metal Homogeneously Catalyzed Formic Acid Dehydrogenation

Formic acid (FA) possesses a high volumetric concentration of H2 (53 g L−1). Moreover, it can be easily prepared, stored, and transported. Therefore, FA stands out as a potential liquid organic hydrogen carrier (LOHC), which allows storage and transportation of hydrogen in a safe way. The dehydrogenation to produce H2 and CO2 competes with its dehydration to give CO and H2O. For this reason, research on selective catalytic FA dehydrogenation has gained attention in recent years. Several examples of highly active homogenous catalysts based on precious metals effective for the selective dehydrogenation of FA have been reported. Among them are the binuclear iridium-bipyridine catalysts described by Fujita and Himeda et al. (TOF = 228,000 h−1) and the cationic species [IrClCp*(2,2′-bi-2-imidazoline)]Cl (TOF = 487,500 h−1). However, examples of catalytic systems effective for the solventless dehydrogenation of FA, which is of great interest since it allows to reduce the reaction volume and avoids the use of organic solvents that could damage the fuel cell, are scarce. In this context, the development of transition metal catalysts based on cheap and easily available nonprecious metals is a subject of great interest. This work contains a summary on the state of the art of catalytic dehydrogenation of FA in homogeneous phase, together with an account of the catalytic systems based on non-precious metals so far reported.

Impact of Green Cosolvents on the Catalytic Dehydrogenation of Formic Acid: The Case of Iridium Catalysts Bearing NHC-phosphane Ligands

The catalysts [Ir(COD)(κ3-P,C,P'-PCNHCP)]BF4 and [Ir(COD)(κ2-P,C-PCNHCO)]BF4 proved to be active in the solventless dehydrogenation of formic acid. The impact of various cosolvents on the activity was evaluated, showing an outstanding improvement of the catalytic performance of [Ir(COD)(κ2-P,C-PCNHCO)]BF4] in "green" organic carbonates: namely, dimethyl carbonate (DMC) and propylene carbonate (PC). The TOF1h value for [Ir(COD)(κ2-P,C-PCNHCO)]BF4 increases from 61 to 988 h-1 upon changing from solventless conditions to a 1/1 (v/v) DMC/HCOOH mixture. However, in the case of [Ir(COD)(PCNHCP)]BF4, only a marginal improvement from 156 to 172 h-1 was observed under analogous conditions. Stoichiometric experiments allowed the identification of various key reaction intermediates, providing valuable information on their reactivity. Experimental data and DFT calculations point to the formation of dinuclear species as the catalyst deactivation pathway, which is prevented in the presence of DMC and PC.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Highly efficient additive-free dehydrogenation of neat formic acid

Formic acid (FA) is a promising hydrogen carrier which can play an instrumental role in the overall implementation of a hydrogen economy. In this regard, it is important to generate H₂ gas from neat FA without any solvent/additive, for which existing systems are scarce. Here we report the remarkable catalytic activity of a ruthenium 9H-acridine pincer complex for this process. The catalyst is unusually stable and robust in FA even at high temperatures and can catalyse neat FA dehydrogenation for over a month, with a total turnover number of 1,701,150, while also generating high H₂/CO₂ gas pressures (tested up to 100 bars). Mechanistic investigations and DFT studies are conducted to fully understand the molecular mechanism to the process. Overall, the high activity, stability, selectivity, simplicity and versatility of the system to generate a CO-free H₂/CO₂ gas stream and high pressure from neat FA makes it promising for large-scale implementation.

Synergistic Effect of Pendant N Moieties for Proton Shuttling in the Dehydrogenation of Formic Acid Catalyzed by Biomimetic IrIII Complexes

Formic acid (FA) is among the most promising hydrogen storage materials. The development of efficient catalysts for the dehydrogenation of FA via molecular-level control and precise tuning remains challenging. A series of biomimetic Ir complexes was developed for the efficient dehydrogenation of FA in an aqueous solution without base addition. A high turnover frequency of 46510 h^-1 was achieved at 90 °C in 1 m FA solution with complex 1 bearing pendant pyridine. Experimental and mechanistic studies revealed that the integrated pendant pyridine and pyrazole moieties of complex 1 could act as proton relay and facilitate proton shuttling in the outer coordination sphere. This study provides a new strategy to control proton transfer accurately and a new principle for the design of efficient catalysts for FA dehydrogenation.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Catalytic oxidations by dehydrogenation of alkanes, alcohols and amines with defined (non)-noble metal pincer complexes

The present review highlights the latest developments in the field of transition metal-catalysed oxidations, in particular C–C–, C–O– and C–N-bond dehydrogenations.

Polymer-Anchored Bifunctional Pincer Catalysts for Chemoselective Transfer Hydrogenation and Related Reactions

A series of polymer-supported cooperative PC(sp³ )P pincer catalysts was synthesized and characterized. Their catalytic activity in the acceptorless dehydrogenative coupling of alcohols and the transfer hydrogenation of aldehydes with formic acid as a hydrogen source was investigated. This comparative study, examining homogeneous and polymer-tethered species, proved that carefully designing a link between the support and the catalytic moiety, which takes into consideration the mechanism underlying the target transformation, might lead to superior heterogeneous catalysis.

Conformational twisting of a formate-bridged diiridium complex enables catalytic formic acid dehydrogenation

We previously reported that iridium complex 1a enables the first homogeneous catalytic dehydrogenation of neat formic acid and enjoys unusual stability through millions of turnovers. Binuclear iridium hydride species 5a, which features a provocative C2-symmetric geometry, was isolated from the reaction as a catalyst resting state. By synthesizing and carefully examining the catalytic initiation of a series of analogues to 1a, we establish here a strong correlation between the formation of C2-twisted iridium dimers analogous to 5a and the reactivity of formic acid dehydrogenation: an efficient C2 twist appears unique to 1a and essential to catalytic reactivity.

Iridium-based hydride transfer catalysts: from hydrogen storage to fine chemicals

Selective hydrogen transfer remains a central research focus in catalysis: hydrogenation and dehydrogenation have central roles, both historical and contemporary, in all aspects of fuel, agricultural, pharmaceutical, and fine chemical synthesis. Our lab has been involved in this area by designing homogeneous catalysts for dehydrogenation and hydrogen transfer that fill needs ranging from on-demand hydrogen storage to fine chemical synthesis. A keen eye toward mechanism has enabled us to develop systems with excellent selectivity and longevity and demonstrate these in a diversity of high-value applications. Here we describe recent work from our lab in these areas that are linked by a central mechanistic trichotomy of catalyst initiation pathways that lead highly analogous precursors to a diversity of useful applications.

Iridium–NHC-based catalyst for ambient pressure storage and low temperature release of H2via the CO2/HCO2H couple

An imidazolylidene-based abnormal NHC ligand partnering with a proton-responsive benzimidazolato motif renders an Ir-catalyst highly efficient in both ambient-pressure CO₂-hydrogenation and low-temperature HCO₂H-dehydrogenation pertinent to hydrogen storage/delivery processes.