Stable Pd-Doped Ceria Structures for CH4 Activation and CO Oxidation

Near-Barrierless CO Oxidation Using Phosphotungstic Acid-Supported Single-Atom Catalysts

Efficient CO oxidation at ambient or low temperatures is essential for environmental purification and selective CO oxidation in H2, yet achieving this remains a challenge with current methodologies. In this research, we extensively evaluated the catalytic performance of phosphotungstic acid (PTA)-supported 11 M1/PTA single-atom catalysts (SACs) using density functional theory calculations across both gas phase and 12 common solvents. The Rh1/PTA, Pd1/PTA, and Pt1/PTA systems exhibit moderate CO adsorption energies, facilitating the feasibility of oxygen vacancy formation. Remarkably, the Pd1/PTA and Pt1/PTA catalysts exhibited negligible energy barriers and demonstrated exceptionally high catalytic rates, with values reaching up to (1 × 1010)11, markedly exceeding the threshold for room temperature reactions, set at 6.55 × 108. This phenomenon is attributed to a transition from the high-energy barrier processes of oxygen dissociation in O2 and N-O bond dissociation in N2O to the more efficient dissociation of H2O2. Orbital analysis and charge variations at metal sites throughout the reaction process provide deeper insights into the role of the three metal catalytic sites in CO activation. Our findings not only reveal key aspects of SACs in facilitating CO oxidation at low temperatures but also provide valuable insights for future catalytic reaction mechanism studies and environmental applications.

Two decades of ceria nanoparticle research: structure, properties and emerging applications

Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.

Pd Single-Atom Loaded Ce-Zr Solid Solution Catalysts Prepared by Flame Spray Pyrolysis for Efficient CO Catalytic Oxidation

Single-atom catalysts (SACs) exhibit remarkable catalytic activity at each metal site. However, conventionally synthesized single-atom catalysts often possess low metal loading, thereby constraining their overall catalytic performance. Here, a flame spray pyrolysis (FSP) method for the synthesis of a single-atom catalyst with a high loading capacity of up to 1.4 wt.% in practice is reported. CeZrO2 acts as a carrier and provides a large number of anchoring sites, which promotes the high-density generation of Pd, and the strong interaction between the metal and the support avoids atom aggregation. Pd-CeZrO2 series catalysts have excellent CO oxidation performance. When 0.97 wt.% Pd is added, the catalytic activity is the highest, and the temperature can be reduced to 120 °C. This work presented here demonstrates that FSP, as an inherently scalable technique, allows for elevating the single-atom loading to achieve an increase in its catalytic performance. The method presented here more options for the preparation of SACs.

Understanding and controlling the formation of single-atom site from supported Cu10 cluster by tuning CeO2 reducibility: Theoretical insight into the Gd-doping effect on electronic metal-support interaction

Controlling the formation of single-atom (SA) sites from supported metal clusters is an important and interesting issue to effectively improve the catalytic performance of heterogeneous catalysts. For extensively studied CO oxidation over metal/CeO2 systems, the SA formation and stabilization under reaction conditions is generally attributed to CO adsorption, however, the pivotal role played by the reducible CeO2 support and the underlying electronic metal-support interaction (EMSI) are not yet fully understood. Based on a ceria-supported Cu10 catalyst model, we performed density functional theory calculations to investigate the intrinsic SA formation mechanism and discussed the synergistic effect of Gd-doped CeO2 and CO adsorption on the SA formation. The CeO2 reducibility is tuned with doped Gd content ranging from 12.5 % ∼ 25 %. Based on ab initio thermodynamic and ab initio molecular dynamics, the critical condition for SA formation was identified as 21.875 % Gd-doped CeO2 with CO-saturated adsorption on Cu10. Electronic analysis revealed that the open-shell lattice Oδ- (δ < 2) generated by Gd doping facilitates the charge transfer from the bottom-corner Cu (Cubc) to CeO2. The CO-saturated adsorption further promotes this charge transfer process and enhances the EMSI between Cubc and CeO2, leading to the disintegration of Cubc from Cu10 and subsequent formation of the active SA site.

Atomic-scale insights into the interfacial charge transfer in a NiO/CeO2 heterostructure for electrocatalytic hydrogen evolution

To understand the underlying mechanism of the interfacial charge transfer and local chemical state variation in the nonprecious-based hydrogen evolution reaction (HER) electrocatalysts, a model system of the NiO/CeO₂ heterostructure was chosen for investigation using a combination of the advanced electron microscopic characterization and first-principles calculations. The results directly proved that interfacial charge transfer occurs from Ni to Ce, leading to reduction in the valence state of Ce and increased formation of V_O. This would optimize ΔG_H* and facilitate the hydrogen evolution process, resulting in outstanding HER performance in 1 M KOH with a low overpotential of 99 mV at the current density of 10 mA•cm^-2 and a modest Tafel slope of 78.4 mV•dec^-1 for the NiO/CeO₂ heterostructure sample. Therefore, the improved HER performance could be attributed to the synergistic coupling interactions and electron redistribution at the interface of NiO and CeO₂. These results concretely demonstrate the direct determination of the interfacial structure of the heterostructure and provide atomistic insights to unravel the underlying mechanism of interfacial charge transfer induced HER performance improvement.

Dynamic evolution of the active center driven by hemilabile coordination in Cu/CeO2 single-atom catalyst

Hemilability is an important concept in homogeneous catalysis where both the reactant activation and the product formation can occur simultaneously through a reversible opening and closing of the metal-ligand coordination sphere. However, this effect has rarely been discussed in heterogeneous catalysis. Here, by employing a theoretical study on CO oxidation over substituted Cu₁/CeO₂ single atom catalysts, we show that dynamic evolution of metal-support coordination can significantly change the electronic structure of the active center. The evolution of the active center is shown to either strengthen or weaken the metal-adsorbate bonding as the reaction proceeds from reactants, through intermediates, to products. As a result, the activity of the catalyst can be increased. We explain our observations by extending hemilability effects to single atom heterogenous catalysts and anticipate that introducing this concept can offer a new insight into the important role active site dynamics have in catalysis toward the rational design of more sophisticated single atom catalyst materials.

Engineering the catalytic properties of CeO2 catalyst in HCl-assisted propane dehydrogenation by effective doping: A first-principles-based microkinetic simulation

HCl-assisted propane dehydrogenation (PDH) is an attractive route for propene production with good selectivity. In this study, the doping of CeO2 with different transition metals, including V, Mn, Fe, Co, Ni, Pd, Pt, and Cu, in the presence of HCl was investigated for PDH. The dopants have a pronounced effect on the electronic structure of pristine ceria that significantly alters the catalytic capabilities. The calculations indicate the spontaneous dissociation of HCl on all surfaces with a facile abstraction of the first hydrogen atom except on V- and Mn-doped surfaces. The lowest energy barrier of 0.50 and 0.51eV was found for Pd- and Ni-doped CeO2 surfaces. The surface oxygen is responsible for hydrogen abstraction, and its activity is described by the p-band center. Microkinetics simulation is performed on all doped surfaces. The increase in the turnover frequency (TOF) is directly linked with the partial pressure of propane. The adsorption energy of reactants aligned with the observed performance. The reaction follows first-order kinetics to C3H8. Furthermore, on all surfaces, the formation of C3H7 is found as the rate-determining step confirmed by the degree of rate control (DRC) analysis. This study provides a decisive description of catalyst modification for HCl-assisted PDH.

Assessing the Effect of Dopants on the C-H Activation Activity of γ-Al2 O3 using First-Principles Calculations

In recent years, the high availability of methane in the shale gas reserves has raised significant interest in its conversion to high-value chemicals but this process is still not commercially viable. Metal oxides, due to their surface heterogeneity and the presence of Lewis acidic and basic site pairs are known to facilitate the activation of C-H bonds of methane. In this work, we investigate the C-H bond activation of methane on pristine and doped γ-Al₂ O₃ clusters using density functional theory (DFT) calculations. Our results demonstrate that the polar pathway is energetically preferred over the radical pathway on these systems. We found that the metal dopants (boron and gallium) not only alter the catalytic activity of dopant sites but this effect is more pronounced on some of the adjacent sites (non-local). Among the selected dopants, gallium greatly improves the catalytic activity on most of the site pairs (including most active and least active) of pristine γ-Al₂ O₃ . Additionally, we identified a correlation between H₂ binding energies and the C-H activation free energies on Ga-doped γ-Al₂ O₃ .

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd^δ+ (0<δ<2) that has greatly enhanced activity for methane oxidation: T₅₀ lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd^δ+ site is related to its oxygen-deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

New horizons of MBenes: highly active catalysts for the CO oxidation reaction

The search for materials with high intrinsic carbon monoxide oxidation reaction (COOR) catalytic activity is critical for enhancing the efficiency of reducing CO contamination. COOR catalysts, however, have long relied heavily on noble metals and CeO₂. Herein, in order to search for non-noble COOR catalysts that are more active than CeO₂, 18 oxygen-functionalized MBenes with orthorhombic and hexagonal crystal structures, denoted as orth-M₂B₂O₂ and hex-M₂B₂O₂ (M = Ti, V, Cr, Zr, Nb, Mo, Hf, Ta and W), were investigated in terms of their COOR catalytic activity by high-throughput first-principles calculations. Hex-Mo₂B₂O₂, orth-Mo₂B₂O₂, hex-V₂B₂O₂ and hex-Cr₂B₂O₂ were found to be more active than CeO₂ and possess structural stability below 1000 K, showing the potential to replace CeO₂ as the substrates of COOR catalysts. Moreover, orth-Mo₂B₂O₂, hex-V₂B₂O₂ and hex-Cr₂B₂O₂ exhibit even higher COOR catalytic activity than Pt-CeO₂ and Au-CeO₂, and are expected to be applied as COOR catalysts directly. Further investigations showed that the formation energy of oxygen vacancies could be used as the descriptor of COOR catalytic activity, which would help to reduce the amount of calculations significantly during the catalyst screening process. This work not only reports a series of 2D materials with high COOR catalytic activity and opens up a new application area for MBenes, but also provides a reliable strategy for highly efficient screening for COOR catalysts.

Surface and Interface Coordination Chemistry Learned from Model Heterogeneous Metal Nanocatalysts: From Atomically Dispersed Catalysts to Atomically Precise Clusters

The surface and interface coordination structures of heterogeneous metal catalysts are crucial to their catalytic performance. However, the complicated surface and interface structures of heterogeneous catalysts make it challenging to identify the molecular-level structure of their active sites and thus precisely control their performance. To address this challenge, atomically dispersed metal catalysts (ADMCs) and ligand-protected atomically precise metal clusters (APMCs) have been emerging as two important classes of model heterogeneous catalysts in recent years, helping to build bridge between homogeneous and heterogeneous catalysis. This review illustrates how the surface and interface coordination chemistry of these two types of model catalysts determines the catalytic performance from multiple dimensions. The section of ADMCs starts with the local coordination structure of metal sites at the metal-support interface, and then focuses on the effects of coordinating atoms, including their basicity and hardness/softness. Studies are also summarized to discuss the cooperativity achieved by dual metal sites and remote effects. In the section of APMCs, the roles of surface ligands and supports in determining the catalytic activity, selectivity, and stability of APMCs are illustrated. Finally, some personal perspectives on the further development of surface coordination and interface chemistry for model heterogeneous metal catalysts are presented.

Defect Engineering on CuMn2O4 Spinel Surface: A New Path to High-Performance Oxidation Catalysts

Catalytic combustion is an efficient method to eliminate CO and volatile organic compound (VOC) pollutants. CuMn₂O₄ spinel is a high-performance non-noble metal oxide catalyst for catalytic combustion and has the potential to replace noble metal catalysts. In order to further improve the catalytic activity of CuMn₂O₄ spinel, we propose a simple and low-cost approach to introduce numerous oxygen and metal vacancies simultaneously in situ on the CuMn₂O₄ spinel surface for the catalytic combustion of CO and VOCs. Alkali treatment was used to generate oxygen vacancies (V_O), copper vacancies (V_Cu), and novel active sites (V_O combines with Mn₂O₃ at the interface between Mn₂O₃(222) and CuMn₂O₄(311)) on the CuMn₂O₄ spinel surface. In the catalytic combustion of CO and VOCs, the vacancies and new active sites showed high activity and stability. The oxidation rate of CO increased by 4.13 times at 160 °C, and that of toluene increased by 11.63 times at 250 °C. Oxygen is easier to adsorb and dissociate on V_O and novel sites, and the dissociated oxygen also more easily participates in the oxidation reaction. Furthermore, the lattice oxygen at V_Cu more readily participates in the oxidation reaction. This strategy is beneficial for the development of defect engineering on spinel surfaces and provides a new idea for improving the catalytic combustion activity of CuMn₂O₄ spinel.

Rational Design of Precious-Metal Single-Atom Catalysts for Methane Combustion

Supported precious-metal single-atom catalysts (PM SACs) have emerged as a new frontier of high-performance catalytic material with 100% atom utilization efficiency. However, the rational design of such material with guidance from fundamental understandings of the structure-activity relationship remains challenging. Here, we report the synthesis, characterizations, and mechanistic investigation of various PM SACs supported on nanoceria for CH₄ combustion. Using density functional theory, two descriptors as the d-band center of PMs and oxygen vacancy formation energy are established, which jointly govern the reactivity for CH₄ combustion. These descriptors are thus applied to predict a dual SAC consisting of proximate Pd and Rh sites, demonstrating a remarkable improvement versus Pd or Rh catalyst, respectively. Our results reveal the general strategy of integrating experimental and computational efforts for investigation of various PM SACs in methane combustion, thus paving the way for the next generation of advanced catalytic materials.

The remarkable performance of a single iridium atom supported on hematite for methane activation: a density functional theory study

Methane is the major component of natural gas, and it significantly contributes to global warming. In this study, we investigated methane activation on the α-Fe2O3(110) surface and M/α-Fe2O3(110) surfaces (M = Ag, Ir, Cu, or Co) using the density-functional theory (DFT) + U method. Our study shows that the Ir/α-Fe2O3(110) surface is a more effective catalyst for C-H bond activation than other catalyst surfaces. We have applied electron density difference (EDD), density of states (DOS), and Bader charge calculations to confirm the cooperative CH⋯O and agostic interactions between CH4 and the Ir/α-Fe2O3(110) surface. To further modify the reactivity of the Ir/α-Fe2O3(110) surface towards methane activation, we conducted a study of the effect of oxygen vacancy (OV) on C-H activation and CH4 dehydrogenation. In the comparison of pristine α-Fe2O3(110), Ir/α-Fe2O3(110), and Ir/α-Fe2O3(110)-OV surfaces, the Ir/α-Fe2O3(110)-OV surface is the best in terms of CH4 adsorption energy and C-H bond elongation, whereas the Ir/α-Fe2O3(110) surface catalyst has the lowest C-H bond activation barrier for the CH4 molecule. The calculations indicate that the Ir/α-Fe2O3(110)-OV surface could be a candidate catalyst for CH4 dehydrogenation reactions.

Promotional Effect of Pt-Doping on the Catalytic Performance of Pt−CeO2 Catalyst for CO Oxidation

Growing interest in the development of a hydrogen economy means that CO oxidation is increasingly important for upgrading H2-rich fuel gas streams for fuel cells. CeO2-supported catalysts are the most promising candidates for the catalytic oxidation of CO because of their high activity. In the present work, DFT+U calculations were performed to investigate the stability and CO oxidation reactivity of Ptn (n = 1−4) clusters supported on CeO2(111) (Pt/CeO2) and Pt-doped CeO2(111) (Pt/(Pt−Ce)O2) surfaces. The Pt clusters showed similar nucleation behavior on both CeO2 and (Pt−Ce)O2 surfaces. Further, the formation of oxygen vacancies (Ov) was facilitated because of surface charge depletion caused by the dopant Pt. Our DFT results suggest that the interfacial OV plays an important role in the CO oxidation reaction cycle, and the calculated energy barrier for the CO oxidation reaction on the Pt/(Pt−Ce)O2 surface is approximately 0.43 eV lower than that on the surface of the undoped catalyst, suggesting enhanced CO oxidation reactivity. Therefore, the chemical modification of the CeO2 support via doping is an effective strategy for improving the catalytic performance of Pt/CeO2.

Recent advances in hydrothermal synthesis of facet-controlled CeO2-based nanomaterials

CeO₂-based nanomaterials have received tremendous attention due to their variety of applications. This paper is focused on the recent advances in facet-controlled CeO₂-based nanomaterials by the hydrothermal method. CeO₂-based nanomaterials with controllable size and exposed facets can be prepared by adjusting the reaction parameters. Moreover, doping and loading metals can improve the oxygen storage capacity (OSC) of CeO₂ and its catalytic activity. Various research studies on catalytic applications such as CO oxidation, water-gas shift reaction (WGSR), decomposition of hydrocarbons, and photocatalytic reaction have been carried out to exhibit the high potential of facet-controlled CeO₂ nanomaterials. This review will provide readers with various ideas for facet-controlled CeO₂-based nanomaterials.

Accelerating photo-thermal CO2 reduction to CO, CH4 or methanol over metal/oxide semiconductor catalysts

Photo-thermal reduction of atmospheric carbon dioxide into methane, methanol, and carbon monoxide under mild conditions over suitable (photo)catalysts is a feasible pathway for the production of fuels and platform chemicals with minimal involvement of fossil fuels. In this perspective, we showcase transition metal nanoparticles (Ni, Cu, and Ru) dispersed over oxide semiconductors and their ability to act as photo catalysts in reverse water gas shift reaction (RWGS), methane dry reforming, methanol synthesis, and Sabatier reactions. By using a combination of light and thermal energy for activation, reactions can be sustained at much lower temperatures compared to thermally driven reactions and light can be used to leverage reaction selectivity between methanol, methane, and CO. In addition to influencing the reaction mechanism and decreasing the apparent activation energies, accelerating reaction rates and boosting selectivity beyond thermodynamic limitations is possible. We also provide future directions for research to advance the current state of the art in photo-thermal CO₂ conversion.

Unique catalytic mechanisms of methanol dehydrogenation at Pd-doped ceria: A DFT+U study

Pd-doped ceria is highly active in promoting oxidative dehydrogenation (ODH) reactions and also a model single atom catalyst (SAC). By performing density functional theory calculations corrected by on-site Coulomb interactions, we systematically studied the physicochemical properties of the Pd-doped CeO₂(111) surface and the catalytic methanol to formaldehyde reaction on the surface. Two different configurations were located for the Pd dopant, and the calculated results showed that doping of Pd will make the surface more active with lower oxygen vacancy formation energies than the pristine CeO₂(111). Moreover, two different pathways for the dehydrogenation of CH₃OH to HCHO on the Pd-doped CeO₂(111) were determined, one of which is the conventional two-step process (stepwise pathway) with the O-H bond of CH₃OH being broken first followed by the C-H bond cleavage, while the other is a novel one-step process (concerted pathway) involving the two H being dissociated from CH₃OH simultaneously even with a lower energy barrier than the stepwise one. With electronic and structural analyses, we showed that the direct reduction of Pd⁴⁺ to Pd²⁺ through the transfer of two electrons can outperform the separated Ce⁴⁺ to Ce³⁺ processes with the help of configurational evolution at the Pd site, which is responsible for the existence of such one-step dehydrogenation process. This novel mechanism may provide an inspiration for constructing ceria-based SAC with unique ODH activities.

Pursuing unprecedent anisotropic morphologies of halide-free Pd nanoparticles by tuning nucleation and growth

In this paper, a highly effective and scalable polyol-based modified procedure is reported, yielding shape controlled Pd nanoparticles (NPs) formed via two distinct growth mechanisms as a function of the...

Adsorption and Oxidation of CO on Ceria Nanoparticles Exposing Single-Atom Pd and Ag: A DFT Modelling

Various COx species formed upon the adsorption and oxidation of CO on palladium and silver single atoms supported on a model ceria nanoparticle (NP) have been studied using density functional calculations. For both metals M, the ceria-supported MCOx moieties are found to be stabilised in the order MCO < MCO2 < MCO3, similar to the trend for COx species adsorbed on M-free ceria NP. Nevertheless, the characteristics of the palladium and silver intermediates are different. Very weak CO adsorption and the small exothermicity of the CO to CO2 transformation are found for O4Pd site of the Pd/Ce21O42 model featuring a square-planar coordination of the Pd2+ cation. The removal of one O atom and formation of the O3Pd site resulted in a notable strengthening of CO adsorption and increased the exothermicity of the CO to CO2 reaction. For the analogous ceria models with atomic Ag instead of atomic Pd, these two energies became twice as small in magnitude and basically independent of the presence of an O vacancy near the Ag atom. CO2-species are strongly bound in palladium carboxylate complexes, whereas the CO2 molecule easily desorbs from oxide-supported AgCO2 moieties. Opposite to metal-free ceria particle, the formation of neither PdCO3 nor AgCO3 carbonate intermediates before CO2 desorption is predicted. Overall, CO oxidation is concluded to be more favourable at Ag centres atomically dispersed on ceria nanostructures than at the corresponding Pd centres. Calculated vibrational fingerprints of surface COx moieties allow us to distinguish between CO adsorption on bare ceria NP (blue frequency shifts) and ceria-supported metal atoms (red frequency shifts). However, discrimination between the CO2 and CO32- species anchored to M-containing and bare ceria particles based solely on vibrational spectroscopy seems problematic. This computational modelling study provides guidance for the knowledge-driven design of more efficient ceria-based single-atom catalysts for the environmentally important CO oxidation reaction.

AEMFC Exploiting a Pd/CeO2-Based Anode Compared to Classic PEMFC via LCA Analysis

The hydrogen economy relies on effective and environmentally friendly processes for energy conversion and storage. To this end, hydrogen is progressively holding the role of preferred energy vector. Within this frame, electrochemical science and technology is actively contributing in developing advanced fuel cells and water electrolyzers to be integrated in (i) energy parks to decouple production and consumption; (ii) exploit renewable sources; (iii) favour the progressive reduction of fossil fuels and reduce the greenhouse effect via decarbonization. The exploitation of the relevant processes and devices call for the sound control over the environmental impact from production to end-of-life steps. Here, life-cycle analyses were performed and discussed focusing on both acid and alkaline fuel cells, i.e., proton exchange membrane fuel cells (PEMFC) and anion-exchange membrane fuel cells (AEMFC), and assessing their contribution to key environmental impact categories such as, for example, global warming and ozone layer depletion. Within these premises, the study points to the benefits of replacing platinum by low load Pd/CeO2 bifunctional electrocatalyst on electrochemical hydrogen production and usage.

Low-Temperature Methane Partial Oxidation over Pd Supported on CeO2: Effect of the Preparation Method and Precursors

The catalytic production of syngas by the partial oxidation of methane (POM) was investigated over Pd supported on ceria (0.5–2 Pd wt.%) prepared by incipient wetness impregnation and by mechanochemical methods. The performance of the Pd/CeO2 catalyst prepared by milling CeO2 and Pd acetate was superior to that prepared by milling CeO2 and Pd nitrate and to Pd/CeO2 prepared by impregnation from Pd acetate. The best catalytic activity of the Pd/CeO2 catalyst prepared from CeO2 and Pd acetate was obtained by milling at 50 Hz for 5 min. Two-step combustion and reforming reaction mechanism were identified. Remarkably, methane conversion increased progressively with Pd loading for the catalysts prepared by incipient wetness impregnation, whereas low metal loading showed better conversion of methane for the catalysts prepared by ball milling using Pd acetate. This was explained in terms of an impressive dispersion of Pd species with a strong interaction with the surface of ceria, as deduced from transmission electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy characterization, which revealed a large quantity of highly oxidized species at the surface.

Thermally stable surfactant-free ceria nanocubes in silica aerogel

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L₃ edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

Synergistic Effects of Ternary PdO-CeO2-OMS-2 Catalyst Afford High Catalytic Performance and Stability in the Reduction of NO with CO

We developed a robust ternary PdO-CeO₂-OMS-2 catalyst with excellent catalytic performance in the selective reduction of NO with CO using a strategy based on combining components that synergistically interact leading to an effective abatement of these toxic gases. The catalyst affords 100% selectivity to N₂ at the nearly full conversion of NO and CO at 250 °C, high stability in the presence of H₂O, and a remarkable SO₂ tolerance. To unravel the origin of the excellent catalytic performance, the structural and chemical properties of the PdO-CeO₂-OMS-2 nanocomposite were analyzed in the as-prepared and used state of the catalyst, employing a series of pertinent characterization methods and specific catalytic tests. The experimental as well as theoretical results, based on density-functional theory calculations suggest that CO and NO follow different reaction pathways, CO is preferentially adsorbed and oxidized at Pd sites (Pd^II and Pd⁰), while NO decomposes on the ceria surface. Lattice oxygen vacancies at the interfacial perimeter of PdO-CeO₂ and PdO-OMS-2, and the diffusion of oxygen and oxygen vacancies are proposed to play a critical role in this multicenter reaction system.

The first-principles-based microkinetic simulation of the dry reforming of methane over Ru(0001)

As the temperature was increased, the generation rate of H₂ and CO in the DRM reaction on Ru(0001) gradually increased along with the ratio of H₂/CO generation rate.

Synthetic strategies of supported atomic clusters for heterogeneous catalysis

Supported atomic clusters with uniform metal sites and definite low-nuclearity are intermediate states between single-atom catalysts (SACs) and nanoparticles in size. Benefiting from the presence of metal–metal bonds, supported atomic clusters can trigger synergistic effects among every metal atom, which contributes to achieving unique catalytic properties different from SACs and nanoparticles. However, the scalable and precise synthesis and atomic-level insights into the structure–properties relationship of supported atomic clusters is a great challenge. This perspective presents the latest progress of the synthesis of supported atomic clusters, highlights how the structure affects catalytic properties, and discusses the limitations as well as prospects.

Supported atomic clusters with precise nuclearity are intermediate states between single-atom catalysts and nanoparticles in size. Here the authors summarize and discuss synthetic strategies of supported atomic clusters with unique catalytic properties for heterogeneous reactions.

Assessment of PBE+U and HSE06 methods and determination of optimal parameter U for the structural and energetic properties of rare earth oxides

Rare earth oxides are attracting increasing interest as a relatively unexplored group of materials with potential applications in heterogeneous catalysis and electrocatalysis; therefore, a credible and universal computational approach is needed for modeling their reactivity. In this work, we systematically assessed the performance of the PBE+U method against the results of the hybrid HSE06 method with respect to the description of structural parameters and energetic properties of the selected hexagonal lanthanide sesquioxides and the cubic fluorite-type cerium dioxide. In addition, we evaluated the performance of PBE+U in describing the electronic structure and adsorption properties of the CeO₂(111) and Nd₂O₃(0001) surfaces. The HSE06 method reproduces rather well the lattice parameters and selected energetic properties with respect to the experimental values. The PBE+U method is able to reproduce the results of HSE06 or the experimental values only if the U parameter is selected from an appropriate range of values. The U value around 3 eV gives the best description of the lattice parameters of most bulk oxides. 2 eV-3 eV is also found to be the optimal range of U for the reaction energies of bulk La₂O₃, Ce₂O₃, Nd₂O₃, Er₂O₃, and Ho₂O₃. U = 1 eV gives the best results for Pr₂O₃, Pm₂O₃, Eu₂O₃, Tm₂O₃, and Lu₂O₃, whereas Gd₂O₃ could not be accurately described by the PBE+U method. The U values (∼3 eV) found optimal for most bulk oxides also work well in the calculations of adsorption of small molecules on Nd₂O₃(0001) and CeO₂(111), although larger U values are required to obtain sufficient localization of 4f electrons.

Single-Atom Catalysts across the Periodic Table

Isolated atoms featuring unique reactivity are at the heart of enzymatic and homogeneous catalysts. In contrast, although the concept has long existed, single-atom heterogeneous catalysts (SACs) have only recently gained prominence. Host materials have similar functions to ligands in homogeneous catalysts, determining the stability, local environment, and electronic properties of isolated atoms and thus providing a platform for tailoring heterogeneous catalysts for targeted applications. Within just a decade, we have witnessed many examples of SACs both disrupting diverse fields of heterogeneous catalysis with their distinctive reactivity and substantially enriching our understanding of molecular processes on surfaces. To date, the term SAC mostly refers to late transition metal-based systems, but numerous examples exist in which isolated atoms of other elements play key catalytic roles. This review provides a compositional encyclopedia of SACs, celebrating the 10th anniversary of the introduction of this term. By defining single-atom catalysis in the broadest sense, we explore the full elemental diversity, joining different areas across the whole periodic table, and discussing historical milestones and recent developments. In particular, we examine the coordination structures and associated properties accessed through distinct single-atom-host combinations and relate them to their main applications in thermo-, electro-, and photocatalysis, revealing trends in element-specific evolution, host design, and uses. Finally, we highlight frontiers in the field, including multimetallic SACs, atom proximity control, and possible applications for multistep and cascade reactions, identifying challenges, and propose directions for future development in this flourishing field.

Theoretical Studies on the Stability and Reactivity of the Metal-Doped CeO2(100) Surface: Toward H2 Dissociation and Oxygen Vacancy Formation

Surface doping is a common method to improve the performance of nanostructured materials. Different dopants will affect the structure and catalytic reactivity of the support. For a comprehensive understanding of the doping effects of metals doped into CeO₂, we conducted density functional theory (DFT) studies on the stabilities and geometry structures of transition-metal atoms (M = Fe, Co, Ni, Cu; Ru, Rh, Pd, Ag; Os, Ir, Pt, Au) doped into CeO₂(111), (110), and (100) surfaces. Moreover, the reactivity for H₂ dissociation and oxygen vacancy formation are systematically investigated on M-doped CeO₂(100) surfaces. The greater the binding energies of doped M atoms on the CeO₂ surface, the more difficult the formation of oxygen vacancies. The doped Co and Ir atoms do not directly participate in H₂ activation but serve as a promoter to make the H-H bond to break easily. The Cu, Ru, Pd, Ag, Pt, and Au atoms could act as the catalytically active center for H₂ dissociation and greatly reduce the activation energy barrier. Besides, it is easier to generate H₂O (W^M) and a surface oxygen vacancy from the intermediate H2^M/H4^M than from H3^M/H5^M, which is related to the acid-base interaction between H_Ce/M* and H_O* in H2^M/H4^M. This work could provide theoretical insights into the atomic structure characteristics of the transition-metal-doped CeO₂(100) surface and give ideas for the design of hydrogenation catalysts.