A Pd/Monolayer Titanate Nanosheet with Surface Synergetic Effects for Precise Synthesis of Cyclohexanones

Structure, Properties, Preparation, and Application of Layered Titanates

As a typical cation-exchangeable layered compound, layered titanate has a unique open layered structure. Its excellent physical and chemical properties allow its wide use in the energy, environmental protection, electronics, biology, and other fields. This paper reviews the recent progress in the research on the structure, synthesis, properties, and application of layered titanates. Various reactivities, as well as the advantages and disadvantages, of different synthetic methods are discussed. The reaction mechanism and influencing factors of the ion exchange reaction, intercalation reaction, and exfoliation reaction are analyzed. The latest research progress on layered titanates and their modified products in the fields of photocatalysis, adsorption, electrochemistry, and other applications is summarized. Finally, the future development of layered titanate and its exfoliated product two-dimensional nanosheets is proposed.

Amino-functionalized MIL-125(Ti) for photodenitrification of pyridine in fuels via coordination activation by unsaturated Ti4+ centers

Due to their explicit structure, metal-organic frameworks (MOFs) have been supposed to be credible platforms to research the micro-mechanism of heterogeneous photocatalysis. In this study, amino-functionalized MOFs (MIL-125(Ti)-NH₂ (denoted as MTi), UiO-66(Zr)-NH₂ (denoted as UZr) and MIL-68(In)-NH₂ (denoted as MIn)) with three different metal centers were synthesized and applied for the denitrification of simulated fuels under visible light irradiation, during which pyridine was used as a typical nitrogen-containing compound. The results showed that MTi had the best activity among the above three MOFs, and the denitrogenation rate increased to 80% after 4 h of visible light irradiation. On the grounds of the theoretical calculation of pyridine adsorption and actual activity experiments, it can be presumed that the unsaturated Ti⁴⁺ metal centers should be the key active sites. Meanwhile, the XPS and in situ infrared results verified that the coordinatively unsaturated Ti⁴⁺ sites facilitate the activation of pyridine molecules through the surface -N⋯Ti- coordination species. The coordination-photocatalysis synergism promotes the efficiency of photocatalytic performance and the corresponding mechanism is proposed.

Enhanced photocatalytic benzyl alcohol oxidation over Bi4Ti3O12 ultrathin nanosheets

Ultrathin Bi₄Ti₃O₁₂ nanosheets (NS) with the thickness about 3.9 nm were successfully synthesized by a hydrothermal method and were used as a photocatalyst for the oxidation of benzyl alcohol (BA) to benzaldehyde (BAD). The photocatalytic performance of NS is about 8 times higher than that of bulk Bi₄Ti₃O₁₂. In-situ FTIR of pyridine adsorption and NH₃-TPD reveal that NS has more surface Lewis acid sites (Ti⁴⁺) for the adsorption and activation of BA. The photogenerated electrons (e^-) and holes (h⁺) of NS can be fully used to produce the superoxide radicals and carbon-centered radicals, respectively. The monolayer nanosheet structure of NS not only greatly promotes the separation of photogenerated carriers, but also achieves the efficient activation of BA molecules via the CO⋯Ti coordination. This work successfully reveals the surface/interface interactions between the surface active sites of a photocatalyst and the reactive molecules via using ultrathin nanosheet as a molecular platform.

Unsaturated NiII Centers Mediated the Coordination Activation of Benzylamine for Enhancing Photocatalytic Activity over Ultrathin Ni MOF-74 Nanosheets

Creating accessible unsaturated active sites in metal-organic frameworks (MOFs) holds great promise for developing highly efficient catalysts. Herein, ultrathin Ni MOF-74 nanosheets (NMNs) with high-density coordinatively unsaturated Ni^II centers are prepared as a photocatalyst. The results of in situ ATR-IR, Raman, UV-vis DRS, and XPS suggest that abundant Ni^II centers can act as the active sites for boosting benzylamine (BA) activation via forming -Ni-NH₂- coordination intermediates. The generation of coordination intermediates assists the transfer of photo-generated holes to BA molecules for producing BA cation free radicals, better impelling the breaking of N-H bonds and the photooxidation of BA molecules. The photo-generated electrons further activate O₂ molecules to O₂^•- radicals for triggering the reaction. The experiments reveal that the coordination activation of BA molecules may be a rate-determining step on NMNs rather than the adsorption and activation of O₂ molecules. Moreover, NMNs possess a better ability for the separation of photo-generated carriers in comparison with bulk Ni MOF-74 (NMBs). As a result, NMNs achieve a kinetic rate constant of 0.538 h^-1 for the photocatalytic oxidative coupling of BA under visible light, about 50 times higher than that of NMBs (0.0011 h^-1). Finally, a probable synergetic catalytic mechanism with coordination activation and photocatalysis is discussed on a molecular level. This study not only highlights the importance of coordination activation for heterogeneous photocatalysis but also affords an inspiration for building ultrathin MOF nanosheets.

Recent progress on selective hydrogenation of phenol toward cyclohexanone or cyclohexanol

Phenol is considered as an important platform molecule for synthesizing value-added chemical intermediates and products. To date, various strategies for phenol transformation have been developed, and among them, selective hydrogenation of phenol toward cyclohexanone (K), cyclohexanol (A) or the mixture KA oil has been attracted great interest because they are both the key raw materials for the synthesis of nylon 6 and 66, as well as many other chemical products, including polyamides. However, until now it is still challengeable to realize the industrilized application of phenol hydrogenation toward KA oils. To better understand the selective hydrogenation of phenol and fabricate the enabled nanocatalysts, it is necessary to summarize the recent progress on selective hydrogenation of phenol with different catalysts. In this review, we first summarize the selective hydrogenation of phenol toward cyclohexanone or cyclohexanol by different nanocatalysts, and simultaneously discuss the relationship among the active components, type of supports and their performances. Then, the possible reaction mechanism of phenol hydrogenation with the typical metal nanocatalysts is summarized. Subsequently, the possible ways for scale-up hydrogenation of phenol are discussed. Finally, the potential challenges and future developments of metal nanocatalysts for the selective hydrogenation of phenol are proposed.

Alkaline Co(OH)2-Decorated 2D Monolayer Titanic Acid Nanosheets for Enhanced Photocatalytic Syngas Production from CO2

The difficulty of adsorption and activation of CO₂ at the catalytic site and rapid recombination of photogenerated charge carriers severely restrict the CO₂ conversion efficiency. Here, we fabricate a novel alkaline Co(OH)₂-decorated ultrathin 2D titanic acid nanosheet (H₂Ti₆O₁₃) catalyst, which rationally couples the structural and functional merits of ultrathin 2D supports with catalytically active Co species. Alkaline Co(OH)₂ beneficially binds and activates CO₂ molecules, while monolayer H₂Ti₆O₁₃ acts as an electron relay that bridges a photosensitizer with Co(OH)₂ catalytic sites. As such, photoexcited charges can be efficiently channeled from light absorbers to activated CO₂ molecules through the ultrathin hybrid Co(OH)₂/H₂Ti₆O₁₃ composite, thereby producing syngas (CO/H₂ mixture) from photoreduction of CO₂. High evolution rates of 56.5 μmol h^-1 for CO and 59.3 μmol h^-1 for H₂ are achieved over optimal Co(OH)₂/H₂Ti₆O₁₃ by visible light illumination. In addition, the CO/H₂ ratio can be facilely tuned from 1:1 to 1:2.4 by changing the Co(OH)₂ content, thus presenting a feasible approach to controllably synthesize different H₂/CO mixtures for target applications.

Highly selective hydrogenation of phenol to cyclohexanone over a Pd-loaded N-doped carbon catalyst derived from chitosan

A highly stable Pd-loaded N-doped carbon catalyst (ACN_pd) for phenol hydrogenation was prepared from chitosan by hydrothermal carbonization. ACN_pd does not require a reduction step before catalytic use due to the Pd in the as-prepared catalyst mainly exists in the form of Pd⁰ (80%). The carbon support involves N-containing groups such as pyridinic nitrogen and pyrrolic nitrogen, which could provide basic sites to adsorb phenol effectively. The as-fabricated ACN_pd shows high catalytic performance with turnover frequency (TOF) of 29.34 h^-1. Accordingly, a phenol conversion of 100% and a cyclohexanone selectivity of 99.1% are achieved in 5 h at 100 °C and 1 MPa H₂. This outstanding performance is attributed to the synergetic effects of the Pd particles, the N-functional groups, and the Lewis acid sites on the support. The carbon support presents intrinsic Lewis acid sites due to its electrophilicity, and Pd doping further increases the strength of such acid sites as it causes electron-deficient structural features. Moreover, the Lewis acid sites inhibit the over-hydrogenation from cyclohexanone to cyclohexanol. This study provides new insights into the application of functional biomass-based carbon materials as catalyst supports.

Ultrathin ZnTi-LDH nanosheets for photocatalytic aerobic oxidation of aniline based on coordination activation

Aniline is chemisorbed and activated on ultrathin ZnTi-LDH nanosheets, facilitating the photocatalytic aerobic oxidation of aniline under visible light.

Selective Photocatalytic Oxidation of Thioanisole on DUT-67(Zr) Mediated by Surface Coordination

DUT-67(Zr) was obtained by a solvothermal route and applied to photocatalytic selective synthesis of thioanisole under light illuminating. The conversion of thioanisole is up to 95%, and the selectivity of methyl phenyl sulfoxide is 98%. The activity of DUT-67(Zr) is over 10 times higher than that of UiO-66. This great increased activity is attributed to the high percentages of oxygen vacancies on DUT-67(Zr). The ESR result shows there are more oxygen vacancies that can expose high density unsaturated Zr sites on DUT-67(Zr). The in situ FTIR reveals that unsaturated Zr sites on DUT-67(Zr) possess Lewis acidity which facilitate the adsorption of the substrates to form the coordination species, promoting the activation of thioanisole. The absorption edge of DUT-67(Zr) with coordination species red-shifts to 360 nm, which can be presented by DRS. Furthermore, the oxygen molecules can be activated by excited electrons to form ^•O₂^-. Finally, a possible photocatalytic process of oxidating thioanisole to methyl phenyl sulfoxide based on the coordination effect between DUT-67(Zr) and thioanisole is proposed at a molecular level.

Photodeposition of Pd onto TiO2 nanowires for aqueous-phase selective hydrogenation of phenolics to cyclohexanones

The selective hydrogenation of phenolics to cyclohexanones is an important process in both industrial application and utilization of fossil and renewable feedstocks. However this process remains a challenge in achieving high conversion of phenolics and high selectivity of ketones under mild reaction conditions. In this work, TiO₂ nanowires (TNWs) are successfully synthesized by using an integrated method and the ultra-small Pd clusters were then deposited onto the TNWs by photoreduction. The obtained Pd/TNW catalyst shows superior catalytic performances in the hydrogenation of phenolic derivatives to the corresponding cyclohexanones. In particular, a nearly full conversion of phenol with high selectivity (>99.0%) to cyclohexanone can be achieved at 50 °C and 5.0 bar H₂ in water. A series of characterization studies by means of XRD, XPS, EPR, FTIR, TPD, STEM, and kinetic studies indicate that abundant exposed Lewis acid and basic sites on the surface of TNWs play important roles in the activation of phenolics and desorption of cyclohexanones, while the Pd clusters by photodeposition can attain a hybrid of Pd⁰ and Pd²⁺ species to facilitate the activation of dihydrogenation. A plausible catalytic pathway with synergistic effects of TNWs and Pd species is then proposed.

Hybridization of CuO with Bi2MoO6 Nanosheets as a Surface Multifunctional Photocatalyst for Toluene Oxidation under Solar Irradiation

Herein, CuO/Bi₂MoO₆ hybrid nanosheets were prepared as a surface multifunctional photocatalyst for gas-phase toluene oxidation with high conversion (>99%). Aberration-corrected scanning transmission electron microscopy suggested that CuO species were highly dispersed on the nanosheets. X-ray absorption fine structure spectra indicated that the distorted and stretched Cu-O coordination structures in CuO/Bi₂MoO₆ nanosheets would provide open active sites. In situ Fourier transform infrared and density functional theory results showed that toluene molecules could be chemisorbed and activated on the active sites of CuO/Bi₂MoO₆ nanosheets by the C-H group forming CuO/Bi₂MoO₆···Ph-CH₃ surface complex compounds. These would induce electron-hole transfer and initiate photocatalytic reactions under visible light irradiation. The corresponding intermediates of benzaldehyde and benzoic acid would be detected by in situ diffuse reflectance infrared Fourier transform spectroscopy. Furthermore, the synergistic effect of CuO and Bi₂MoO₆ nanosheets could monitor charge dynamics to facilitate their respective transmission from photoexcitation sites to active centers. This work provides new insights into the essence of visible-light-driven surface photocatalysis and is expected to promote the design of novel and more effective photocatalysts at the molecular level.

Construction of Spirocyclic Tetrahydro-β-carbolines via Cross-Annulation of Phenols with Tryptamines in Water

Phenols are readily available by degradation of lignin resource. Palladium-catalyzed conversion of phenols to tetrahydro-β-carboline skeletons bearing a spirocycle at the C-1 position in water is reported. Various substituted phenols are successfully cross-annulated with different tryptamines via sequential C(Ar)-O bond cleavage of phenols, C-H bond activation of tryptamines, and C-N/C-C bond formations. This method provides a new protocol of converting lignin phenols into high-value-added compounds, such as natural product Komavine.