Polyoxometalate as a Nature-Inspired Bifunctional Catalyst for Lithium–Oxygen Batteries

Polyoxometalate Supported Single Transition Metal Atom as a Redox Mediator for Li-O2 Batteries

Keggin-type polyoxometalate (POM) supported single transition metal (TM) atom (TM1/POM) as an efficient soluble redox mediator for Li-O2 batteries is comprehensively investigated by first-principles calculations. Among the pristine POM and four kinds of TM1/POM (TM = Fe, Co, Ni, and Pt), Co1/POM not only maintains good structural and thermodynamic stability in oxidized and reduced states but also exhibits promising electro(chemical) catalytic performance for both oxygen reduction reaction and oxygen evolution reaction (OER) in Li-O2 batteries with the lowest Gibbs free energy barriers. Further investigations demonstrate that the moderate binding strength of Li2-xO2 (x = 0, 1, and 2) intermediates on Co1/POM guarantees favorable Li2O2 formation and decomposition. Electronic structure analyses indicate that the introduced Co single atom as an electron transfer bridge can not only efficiently improve the electronic conductivity of POM but also regulate the bonding/antibonding states around the Fermi level of [Co1/POM-Li2O2]ox. The solvent effect on the OER catalytic performance and the electronic properties of [Co1/POM-Li2O2]ox with and without dimethyl sulfoxide solvent are also investigated.

Designing a hybrid nanomaterial based on Cr-containing polyoxometalate and graphene oxide as an electrocatalyst for the hydrogen evolution reaction

A new polyoxometalate (POM)-based hybrid nanomaterial (denoted as PMo11-Cr-mGO) was designed via covalent interaction between the Cr(acac)3 complex and [PMo11O39]7- followed by immobilization on the surface of modified graphene oxide (mGO). The prepared nanomaterial was characterized using a series of physicochemical techniques. X-ray diffraction (XRD), Raman analysis, transmission electron microscopy (TEM), and FE-SEM-EDS revealed the preservation of layered GO during the formation of the desired hybrid nanomaterial. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and elemental analysis confirmed the immobilization of POM (PMo11-Cr) on the surface of mGO and the formation of PMo11-Cr-mGO. In order to evaluate the performance of PMo11-Cr-mGO in the hydrogen evolution reaction (HER), electrochemical measurements were also performed. The resulting PMo11-Cr-mGO exhibited excellent HER activities with a low overpotential of 153 mV at 10 mA cm-2 and good durability in acidic media, thus emerging as one of the most efficient POM-based electrocatalysts.

Discrete Arsonate-Grafted Inverted-Keggin 12-Molybdate Ion [Mo12O32(OH)2(4-N3C2H2-C6H4AsO3)4]2- and Formation of a Copper(II)-Mediated Metal-Organic Framework

The discrete inverted-Keggin ion [Mo₁₂O₃₂(OH)₂(4-N₃C₂H₂-C₆H₄AsO₃)₄]^2- (1) has been prepared in an aqueous acidic (pH 0.8) medium by the reaction of MoO₃ with the (4-triazolylphenyl)arsonic acid 4-N₃C₂H₂-C₆H₄AsO₃H₂ under hydrothermal conditions and was isolated as a sodium salt in 21% yield. The exact same reaction in the presence of Cu²⁺ ions resulted in the neutral metal-organic framework (MOF) Cu₂[Mo₁₂O₃₄(4-N₃C₂H₂-C₆H₄AsO₃)₄] (Cu-1) in 68% yield. The inverted-Keggin ion 1 comprises a metal-oxo core, which is capped by four organoarsonate groups, and in Cu-1, individual polyanions are linked in the solid state by coordination of the Cu²⁺ ions with the triazolyl groups. The discrete ion 1 was characterized by single-crystal X-ray diffraction (XRD), Fourier transform infrared (FT-IR), and atomic absorption (AA) spectroscopy, as well as thermogravimetric analysis (TGA), and the POM-MOF Cu-1 was characterized by single-crystal and powder XRD, FT-IR, TGA, and gas sorption. Cu-1 has channels with a diameter of around ∼0.9 nm and exhibits a water-vapor adsorption capacity of 89.7 cm³ g^-1 (p/p₀ = 0.95).

An intriguing tetranuclear Rh-based polyoxometalate for the reduction of nitroarene and oxidation of aniline

An organic-inorganic hybrid polyoxometalate Na₅H_5.68 [Na_0.17Rh_0.83^III(C₆H₈N₂)₂Cl₂]₂(C₈H₈N₂)₂[As₄W₄₀O₁₄₀Rh₄^IV(C₆H₄N₂S)₂]·nH₂O (1) containing 5.66 Rh atoms is prepared; to our knowledge, it owns the largest number of Rh atoms in the Rh-POM family. Compound 1 demonstrates good catalytic performance in the reduction of nitrobenzene to aniline and the oxidation of aniline to azobenzene under mild conditions. Moreover, catalyst 1 exhibits high activity, excellent stability and recyclability.

Single-dispersed polyoxometalate clusters embedded on multilayer graphene as a bifunctional electrocatalyst for efficient Li-S batteries

The redox reactions occurring in the Li-S battery positive electrode conceal various and critical electrocatalytic processes, which strongly influence the performances of this electrochemical energy storage system. Here, we report the development of a single-dispersed molecular cluster catalyst composite comprising of a polyoxometalate framework ([Co₄(PW₉O₃₄)₂]¹⁰⁻) and multilayer reduced graphene oxide. Due to the interfacial charge transfer and exposure of unsaturated cobalt sites, the composite demonstrates efficient polysulfides adsorption and reduced activation energy for polysulfides conversion, thus serving as a bifunctional electrocatalyst. When tested in full Li-S coin cell configuration, the composite allows for a long-term Li-S battery cycling with a capacity fading of 0.015% per cycle after 1000 cycles at 2 C (i.e., 3.36 A g⁻¹). An areal capacity of 4.55 mAh cm⁻² is also achieved with a sulfur loading of 5.6 mg cm⁻² and E/S ratio of 4.5 μL mg⁻¹. Moreover, Li-S single-electrode pouch cells tested with the bifunctional electrocatalyst demonstrate a specific capacity of about 800 mAh g⁻¹ at a sulfur loading of 3.6 mg cm⁻² for 100 cycles at 0.2 C (i.e., 336 mA g⁻¹) with E/S ratio of 5 μL mg⁻¹.

Efficient electrochemical energy storage in Li-S batteries is hindered by sluggish sulfur redox reactions. Here, the authors propose a polyoxometalate/multilayer graphene composite as a bifunctional electrocatalyst for battery performance improvement.

Spin-State Manipulation of Two-Dimensional Metal-Organic Framework with Enhanced Metal-Oxygen Covalency for Lithium-Oxygen Batteries

Aprotic Li-O 2 battery has attracted extensive attention in the past decade owing to the high theoretical energy density, however it is obstructed by the sluggish reaction kinetics at cathodes and large voltage hysteresis. Herein, we regulate the spin state of partial Ni 2+ metal centers ( t 2g 6 e g 2 ) of conductive nickel catecholate framework (Ni II -NCF) nanowire arrays to high-valence Ni 3+ ( t 2g 6 e g 1 ) for Ni III -NCF. The spin-state modulation enables enhanced nickel-oxygen covalency in Ni III -NCF, which facilitates electron exchange between the Ni sites and oxygen adsorbates and accelerates the oxygen redox kinetics. The high affinity of Ni 3+ sites with the intermediate LiO 2 promotes formation of nanosheet-like Li 2 O 2 in the void space among Ni III -NCF nanowires upon discharging. These merit the Li-O 2 battery based on Ni III -NCF with remarkably reduced discharge/charge voltage gaps, superior rate capability, and long cycling stability of over 200 cycles. This work highlights the domination of electron spin state on the redox kinetics and will shed insights into electronic structure regulation of electrocatalysts for Li-O 2 battery and beyond.

Molecular design of heterogeneous electrocatalysts using tannic acid-derived metal-phenolic networks

Electrochemistry could play a critical role in the transition to a more sustainable society by enabling the carbon-neutral production and use of various chemicals as well as efficient use of renewable energy resources. A prerequisite for the practical application of various electrochemical energy conversion and storage technologies is the development of efficient and robust electrocatalysts. Recently, molecularly designed heterogeneous catalysts have drawn great attention because they combine the advantages of both heterogeneous solid and homogeneous molecular catalysts. In particular, recently emerged metal-phenolic networks (MPNs) show promise as electrocatalysts for various electrochemical reactions owing to their unique features. They can be easily synthesized under mild conditions, making them eco-friendly, form uniform and conformal thin films on various kinds of substrates, accommodate various metal ions in a single-atom manner, and have excellent charge-transfer ability. In this minireview, we summarize the development of various MPN-based electrocatalysts for diverse electrochemical reactions, such as the hydrogen evolution reaction, the oxygen evolution reaction, the CO₂ reduction reaction, and the N₂ reduction reaction. We believe that this article provides insight into molecularly designable heterogeneous electrocatalysts based on MPNs and guidelines for broadening the applications of MPNs as electrocatalysts.

Self-Assembly of Polyoxometalate-Resorcin[4]arene-Based Inorganic-Organic Complexes: Metal Ion Effects on the Electrochemical Performance of Lithium Ion Batteries

With their adjustable structures and diverse functions, polyoxometalate (POM)-resorcin[4]arene-based inorganic-organic complexes are a kind of potential multifunctional material. They have potential applications for lithium ion batteries (LIBs). However, the relationship between different coordinated metal ions and electrochemical performance has rarely been investigated. Here, three functionalized POM-resorcin[4]arene-based inorganic-organic materials, [Co₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅4.5 H₂ O (1), [Ni₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅4 EtOH⋅13 H₂ O (2), and [Zn₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅2 H₂ O (3), have been synthesized. Furthermore, to enhance the conductivities of these compounds, 1-3 were doped with reduced graphene oxide (RGO) to give composites 1@RGO-3@RGO, respectively. As anode materials for LIBs, 1@RGO-3@RGO can deliver very high discharge capacities (1445.9, 1285.0 and 1095.3 mAh g^-1 , respectively) in the initial run, and show discharge capacities of 898, 665 and 651 mAh g^-1 , respectively, at a current density of 0.1 A g^-1 over 100 runs. More importantly, the discharge capacities of 319, 283 and 329 mAh g^-1 were maintained for 1@RGO-3@RGO even after 400 cycles at large current density (1 A g^-1 ).

Surface Atom Regulation on Polyoxometalate Electrocatalyst for Simultaneous Low-Voltage H2 Production and Phenol Degradation

The electrocatalytic hydrogen evolution reaction is an ideal method for H₂ production. To improve the performance of polyoxometalate-based electrocatalyst in the hydrogen evolution reaction, one O^2- in polyoxometalate is replaced by S^2-. This weakens the binding of polyoxometalate to H*, facilitates its desorption, and improves the H₂ generation property. Vulcanized polyoxometalate only requires 55 mV to achieve 10 mA·cm^-2 current in the hydrogen evolution reaction. This electrocatalyst also exhibits promising performance in phenol degradation reaction, which is an ideal substitute for high-energy-consuming oxygen evolution reaction in H₂ production due to low voltage to drive. To acquire 100 and 200 mA·cm^-2 in the phenol degradation reaction, this vulcanized polyoxometalate only consumes 1.38 and 1.41 V. With this electrocatalyst working as a cathode and an anode simultaneously, an electrolyzer is constructed by employing phenol-containing KOH as an electrolyte. To obtain 100 and 200 mA·cm^-2 current, the electrolyzer only requires 1.54 and 1.57 V. Because energy-efficient phenol degradation reaction occurs, these values are obviously lower than the oxygen evolution reaction involved in the overall water-splitting H₂ production. This work provides a universal method to enhance the hydrogen evolution reaction (HER) activity of polyoxometalates. Furthermore, a new method is explored, which achieves energy conservation and phenol degradation simultaneously in H₂ production.

Tetraruthenium Polyoxometalate as an Atom-Efficient Bifunctional Oxygen Evolution Reaction/Oxygen Reduction Reaction Catalyst and Its Application in Seawater Batteries

Although development and utilization of efficient catalysts with earth-abundant and cheap elements are desired, precious noble metal-based catalysts are still widely used and studied due to the urgent need to address energy and environmental issues. Polyoxometalates (POMs) can be excellent candidates in this context. In this study, we found that oxo-bridged tetraruthenium polyoxometalate (RuPOM) exhibits excellent electrocatalytic activity for both oxygen evolution and reduction reactions (OER and ORR) with minimal use of noble metal elements and can be used for the development of efficient seawater batteries (SWBs). The deposition of RuPOM on a desired electrode with conducting carbon Ketjen black (KB) by the simple slurry coating method imparted bifunctional OER/ORR activity to the underlying electrode. Although the mass activity was similar, RuPOM/KB mixtures exhibited superior activity even compared to commercially available Pt/C when comparing the activity per noble metal element. Based on these findings, we employed RuPOM to develop efficient SWBs. RuPOM significantly lowered the charging potential and increased the discharging potential of SWBs, which are related to OER and ORR, respectively. This study can provide insights into the development of POM-based electrocatalysts and their application in energy storage and conversion devices.

Self-Assembly Hydrothermal Synthesis of Silverton-Type Polyoxometalate-Based Photocatalysts for Enhanced Degradation

The synthesis of some complex polyoxometalates (POMs) is critical to develop potential photocatalysts with high catalytic activity and selectivity. Here, we address this challenge by a hydrothermal self-assembly route to obtain a novel POM-based Co₄W₆O₂₁(OH)₂·4H₂O with a hierarchical microsphere structure. The Co₄W₆O₂₁(OH)₂·4H₂O crystallizes in the cubic space group Im3̅ with cell parameters: a = b = c = 12.878 Å, α = β = γ = 90°, and Z = 4. The structure is further characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectra. After depositing Ag₂O nanoparticles on the 3D Co₄W₆O₂₁(OH)₂·4H₂O microsphere by photochemical synthesis, the Co₄W₆O₂₁(OH)₂·4H₂O/Ag₂O heterojunction presents enhanced photocatalytic activity for RhB compared with P25 and pristine Ag₂O. Moreover, we confirm the key role of holes for the Co₄W₆O₂₁(OH)₂·4H₂O/Ag₂O and put forward a possible mechanism for the photocatalytic degradation reaction.

Current Challenges and Routes Forward for Nonaqueous Lithium-Air Batteries

Nonaqueous lithium-air batteries have garnered considerable research interest over the past decade due to their extremely high theoretical energy densities and potentially low cost. Significant advances have been achieved both in the mechanistic understanding of the cell reactions and in the development of effective strategies to help realize a practical energy storage device. By drawing attention to reports published mainly within the past 8 years, this review provides an updated mechanistic picture of the lithium peroxide based cell reactions and highlights key remaining challenges, including those due to the parasitic processes occurring at the reaction product-electrolyte, product-cathode, electrolyte-cathode, and electrolyte-anode interfaces. We introduce the fundamental principles and critically evaluate the effectiveness of the different strategies that have been proposed to mitigate the various issues of this chemistry, which include the use of solid catalysts, redox mediators, solvating additives for oxygen reaction intermediates, gas separation membranes, etc. Recently established cell chemistries based on the superoxide, hydroxide, and oxide phases are also summarized and discussed.

Top-down synthesis of polyoxometalate-like sub-nanometer molybdenum-oxo clusters as high-performance electrocatalysts

The top-down fabrication of catalytically active molecular metal oxide anions, or polyoxometalates, is virtually unexplored, although these materials offer unique possibilities, for catalysis, energy conversion and storage. Here, we report a novel top-down route, which enables the scalable synthesis and deposition of sub-nanometer molybdenum-oxo clusters on electrically conductive mesoporous carbon. The new approach uses a unique redox-cycling process to convert crystalline MoIVO2 particles into sub-nanometer molecular molybdenum-oxo clusters with a nuclearity of ∼1-20. The resulting molybdenum-oxo cluster/carbon composite shows outstanding, stable electrocatalytic performance for the oxygen reduction reaction with catalyst characteristics comparable to those of commercial Pt/C. This new material design could give access to a new class of highly reactive polyoxometalate-like metal oxo clusters as high-performance, earth abundant (electro-)catalysts.

Tuning Redox Active Polyoxometalates for Efficient Electron-Coupled Proton-Buffer-Mediated Water Splitting

We present strategies to tune the redox properties of polyoxometalate clusters to enhance the electron‐coupled proton‐buffer‐mediated water splitting process, in which the evolution of hydrogen and oxygen can occur in different forms and is separated in time and space. By substituting the heteroatom template in the Keggin‐type polyoxometalate cluster, H₆ZnW₁₂O₄₀, it is possible to double the number of electrons and protonation in the redox reactions (from two to four). This increase can be achieved with better matching of the energy levels as indicated by the redox potentials, compared to the ones of well‐studied H₃PW₁₂O₄₀ and H₄SiW₁₂O₄₀. This means that H₆ZnW₁₂O₄₀ can act as a high‐performance redox mediator in an electrolytic cell for the on‐demand generation of hydrogen with a high decoupling efficiency of 95.5 % and an electrochemical energy efficiency of 83.3 %. Furthermore, the H₆ZnW₁₂O₄₀ cluster also exhibits an excellent cycling behaviour and redox reversibility with almost 100 % H₂‐mediated capacity retention during 200 cycles and a high coulombic efficiency >92 % each cycle at 30 mA cm⁻².