Efficient Ternary Synergism of Platinum/Tin Oxide/Nitrogen-Doped Carbon Leading to High-Performance Ethanol Oxidation

A Janus Platinum/Tin Oxide Heterostructure for Durable Oxygen Reduction Reaction

Designing efficient and durable electrocatalysts for oxygen reduction reaction (ORR) is essential for proton exchange membrane fuel cells (PEMFCs). Platinum-based catalysts are considered efficient ORR catalysts due to their high activity. However, the degradation of Pt species leads to poor durability of catalysts, limiting their applications in PEMFCs. Herein, a Janus heterostructure is designed for high durability ORR in acidic media. The Janus heterostructure composes of crystalline platinum and cassiterite tin oxide nanoparticles with carbon support (J-Pt@SnO2/C). Based on the synchrotron fine structure analysis and electrochemical investigation, the crystalline reconstruction and charge redistribution at the interface of Janus structure are revealed. The tightly coupled interface could optimize the valance states of Pt and the adsorption/desorption of oxygenated intermediates. As a result, the J-Pt@SnO2/C catalyst possesses distinguishing long-term stability during the accelerated durability test without obvious degradation after 40 000 cycles and keeps the majority of activity after 70 000 cycles. Meanwhile, the catalyst exhibits outstanding activity with half-wave potential at 0.905 V and a mass activity of 0.355 A mgPt -1 (2.7 times higher than Pt/C). The approach of the Janus catalyst paves an avenue for designing highly efficient and stable Pt-based ORR catalyst in the future implementation.

Self-enhanced localized alkalinity at the encapsulated Cu catalyst for superb electrocatalytic nitrate/nitrite reduction to NH3 in neutral electrolyte

The electrocatalytic nitrate/nitrite reduction reaction (eNOx-RR) to ammonia (NH3) is thermodynamically more favorable than the eye-catching nitrogen (N2) electroreduction. To date, the high eNOx-RR-to-NH3 activity is limited to strong alkaline electrolytes but cannot be achieved in economic and sustainable neutral/near-neutral electrolytes. Here, we construct a copper (Cu) catalyst encapsulated inside the hydrophilic hierarchical nitrogen-doped carbon nanocages (Cu@hNCNC). During eNOx-RR, the hNCNC shell hinders the diffusion of generated OH- ions outward, thus creating a self-enhanced local high pH environment around the inside Cu nanoparticles. Consequently, the Cu@hNCNC catalyst exhibits an excellent eNOx-RR-to-NH3 activity in the neutral electrolyte, equivalent to the Cu catalyst immobilized on the outer surface of hNCNC (Cu/hNCNC) in strong alkaline electrolyte, with much better stability for the former. The optimal NH3 yield rate reaches 4.0 moles per hour per gram with a high Faradaic efficiency of 99.7%. The strong-alkalinity-free advantage facilitates the practicability of Cu@hNCNC catalyst as demonstrated in a coupled plasma-driven N2 oxidization with eNOx-RR-to-NH3.

Oxygen-Bridged Cu Binuclear Sites for Efficient Electrocatalytic CO2 Reduction to Ethanol at Ultralow Overpotential

Electrocatalytic CO2 reduction (CO2RR) to alcohols offers a promising strategy for converting waste CO2 into valuable fuels/chemicals but usually requires large overpotentials. Herein, we report a catalyst comprising unique oxygen-bridged Cu binuclear sites (CuOCu-N4) with a Cu···Cu distance of 3.0-3.1 Å and concomitant conventional Cu-N4 mononuclear sites on hierarchical nitrogen-doped carbon nanocages (hNCNCs). The catalyst exhibits a state-of-the-art low overpotential of 0.19 V (versus reversible hydrogen electrode) for ethanol and an outstanding ethanol Faradaic efficiency of 56.3% at an ultralow potential of -0.30 V, with high-stable Cu active-site structures during the CO2RR as confirmed by operando X-ray adsorption fine structure characterization. Theoretical simulations reveal that CuOCu-N4 binuclear sites greatly enhance the C-C coupling at low potentials, while Cu-N4 mononuclear sites and the hNCNC support increase the local CO concentration and ethanol production on CuOCu-N4. This study provides a convenient approach to advanced Cu binuclear site catalysts for CO2RR to ethanol with a deep understanding of the mechanism.

Interface Engineering of PtZn Alloy and Nb2O5 for Promoting Ammonia Oxidation Reaction and Hydrogen Evolution Reaction

Ammonia electrolysis is a promising technology to obtain green hydrogen with zero-carbon emission, in which ammonia oxidation reaction (AOR) and hydrogen evolution reaction (HER) occur at the anode and cathode, respectively. However, the lack of efficient catalysts hinders its practical application. Herein, PtZn alloy is combined with Nb2O5 to construct a bifunctional heterostructure catalyst (PtZn-Nb2O5/C). The optimal sample with Nb2O5 content of 7.05 wt % demonstrates the best performance with a peak current density of 304.1 mA mg-1Pt for AOR, and it is only reduced by 17.0% after 4000 cycles of durability tests. For HER, it has a low overpotential of 34 mV at -10 mA cm-2 under the alkaline condition. This can be ascribed to the interfacial interaction between the PtZn alloy and Nb2O5, which adjusts the adsorption behavior of OHad to concurrently promote AOR and HER activity. This work thus proposes a viable strategy to design an efficient bifunctional catalyst for hydrogen generation from ammonia electrolysis.

Electrodeposition-Assisted Crystal Growth Regulation of PdBi Clusters on Carbon Cloths for Ethanol Oxidation

Carbon-supported Pd-based clusters are one of the most promising anodic catalysts for ethanol oxidation reaction (EOR) due to their encouraging activity and practical applications. However, unclear growth mechanism of Pd-based clusters on the carbon-based materials has hindered their extensive applications. Herein, we first introduce multi-void spherical PdBi cluster/carbon cloth (PdBi/CC) composites by an electrodeposition routine. The growth mechanism of PdBi clusters on the CC supports has been systemically investigated by evaluating the selected samples and tuning their compositions, which involve the big difference in standard redox potential between Pd2+/Pd and Bi3+/Bi and easy adsorption of Bi3+ on the surface of Pd-rich seeds. Benefitting from the ensembles of many nanocrystal subunits, multi-void spherical PdBi clusters can present collective properties and novel functionalities. In addition, the outstanding characteristics of CC supports enable PdBi clusters with stable nanostructures. Thanks to the unique structure, Pd20Bi/CC catalysts manifest higher EOR activity and better stability compared to Pd/CC. Systematic characterizations and a series of CO poisoning tests further confirm that the dramatically enhanced EOR activity and stability can be attributed to the incorporation of Bi species and the strong coupling of the structure between PdBi clusters and CC supports.

High-Dispersive Pd Nanoparticles on Hierarchical N-Doped Carbon Nanocages to Boost Electrochemical CO2 Reduction to Formate at Low Potential

Electrochemical CO2 reduction reaction (CO2 RR) to value-added chemicals/fuels is an effective strategy to achieve the carbon neutral. Palladium is the only metal to selectively produce formate via CO2 RR at near-zero potentials. To reduce cost and improve activity, the high-dispersive Pd nanoparticles on hierarchical N-doped carbon nanocages (Pd/hNCNCs) are constructed by regulating pH in microwave-assisted ethylene glycol reduction. The optimal catalyst exhibits high formate Faradaic efficiency of >95% within -0.05-0.30 V and delivers an ultrahigh formate partial current density of 10.3 mA cm-2 at the low potential of -0.25 V. The high performance of Pd/hNCNCs is attributed to the small size of uniform Pd nanoparticles, the optimized intermediates adsorption/desorption on modified Pd by N-doped support, and the promoted mass/charge transfer kinetics arising from the hierarchical structure of hNCNCs. This study sheds light on the rational design of high-efficient electrocatalysts for advanced energy conversion.

Pt-Sn alloy shells with tunable composition and structure on Au nanoparticles for boosting ethanol oxidation

Combining the core-shell structure with the optimization of surface composition and structure in the shell is a fantastic strategy to enhance the electrocatalytic performances. Here, we synthesized trimetallic Au@Pt_xSn_y core-shell nanoparticles (NPs) with tunable composition and structure of Pt-Sn alloyed shells. Impressively, the Au@PtSn core-shell NPs with hexagonal PtSn alloyed shells exhibited the highest mass activity and specific activity toward ethanol oxidation reaction (EOR) in alkaline electrolyte, which are 13.0 and 12.7 times higher than those of the commercial Pt/C. In addition, the Au@PtSn core-shell NPs displayed the best stability compared to commercial Pt/C, with only 44.8% loss vs. 86.8% loss in mass activity after 1,000 s due to the stronger anti-poisoning ability for reaction intermediates. The theory calculations reveal that the introduction of Au core and alloying Pt with Sn both endow Pt with an appropriate d-band center, and thus effectively boosting the EOR activity.

NiCoPd Inlaid NiCo-Bimetallene for Efficient Electrocatalytic Methanol Oxidation

Pd-based metallenes have attracted great attention recently as newly burgeoning two-dimensional (2D) materials, attributed to their significantly increased active surface areas and intrinsic electrocatalytic activities. Therefore, they could be used as a potential candidate as the high-performance electrocatalyst for methanol oxidation reactions (MORs) in the direct methanol fuel cell. Herein, a new strategy is proposed to fabricate NiCoPd inlaid NiCo-bimetallene (NiCoPd/NiCo-bimetallene) by the structure directing effect of 18-crown-6 ether under an ultrasonic-pulse interface together with the HCHO reduction and atom-diffusion-aging process. NiCoPd ternary-alloys with uniformly dispersed Pd active sites are decorated onto NiCo-bimetallenes, achieving remarkably enhancing the effective utilization of Pd atoms. What is more, the intrinsic activity is enhanced by the "bifunctional mechanism" of NiCo-bimetallene adsorption of intermediate species and increased Pd-active sites. Moreover, the anti-CO poisoning ability is optimized through the "alloying ligand effect" of NiCoPd. Therefore, the NiCoPd/NiCo-bimetallene exhibits excellent mass activity for MOR, which is higher than commercial Pd/C. This work suggests a new way of the Pd-based metallenes catalyst approach to the efficient electrocatalytic MOR.

Porous PdWM (M = Nb, Mo and Ta) Trimetallene for High C1 Selectivity in Alkaline Ethanol Oxidation Reaction

Direct ethanol fuel cells are among the most efficient and environmentally friendly energy-conversion devices and have been widely focused. The ethanol oxidation reaction (EOR) is a multielectron process with slow kinetics. The large amount of by-product generated by incomplete oxidation greatly reduces the efficiency of energy conversion through the EOR. In this study, a novel type of trimetallene called porous PdWM (M = Nb, Mo and Ta) is synthesized by a facile method. The mass activity (15.6 A mgPd -1 ) and C1 selectivity (55.5%) of Pd50 W27 Nb23 /C trimetallene, obtained after optimizing the compositions and proportions of porous PdWM, outperform those of commercial Pt/C (1.3 A mgPt -1 , 5.9%), Pd/C (5.0 A mgPd -1 , 7.2%), and Pd97 W3 /C bimetallene (9.5 A mgPd -1 , 14.1%). The mechanism by which Pd50 W27 Nb23 /C enhances the EOR performance is evaluated by in situ Fourier transform infrared spectroscopy and density functional theory calculations. It is found that W and Nb enhance the adsorption of CH3 CH2 OH and oxophilic high-valence Nb accelerates the subsequent oxidation of CO and CHx species. Moreover, Nb promotes the cleavage of CC bonds and increases the C1 selectivity. Pd60 W28 Mo12 /C and Pd64 W27 Ta9 /C trimetallene synthesized by the same method also exhibit excellent EOR performance.

Controllable Synthesis of Platinum-Tin Intermetallic Nanoparticles with High Electrocatalytic Performance for Ethanol Oxidation

This article proposes a general approach for the preparation of intermetallic nanoparticles of Pt3Sn, PtSn, PtSn2, and PtSn4, triggered by hexamethyldisilazane (HMDS) in conjunction with SnCl2. The ethanol oxidation reaction...

Platinum-Tin/Tin Oxide/CNT Catalysts for High-Performance Electrocatalytic Ethanol Oxidation

Ethanol is a promising liquid clean energy source in the energy conversion field. However, the self-poisoning caused by the strongly adsorbed reaction intermediates (typically, CO) is a critical problem in ethanol oxidation reaction. To address this issue, we proposed a joint use of two strategies, alloying of Pt with other metals and building Pt/metal-oxide interfaces, to achieve high-performance electrocatalytic ethanol oxidation. For this, a well-designed synthetic route combining wet impregnation with a two-step thermal treatment process was established to construct PtSn/SnO_x interfaces on carbon nanotubes. Using this route, the alloying of Pt-Sn and formation of PtSn-SnO_x interfaces can simultaneously be achieved, and the coverage of SnO_x thin films on PtSn alloy nanoparticles can be facilely tuned by the strong interaction between Pt and SnO_x . The results revealed that the partial coverage of SnO_x species not only retained the active sites, but also enhanced the CO anti-poisoning ability of the catalyst. Consequently, the H-PtSn/SnO_x /CNT-2 catalyst with an optimized PtSn-SnO_x interface showed significantly improved performances toward the ethanol oxidation reaction (825 mA mg_Pt ^-1 ). This study provides deep insights into the structure-performance relationship of PtSn/metal oxide composite catalysts, which would be helpful for the future design and fabrication of high-performance Pt-based ethanol oxidation reaction catalysts.

Single-atom catalyst for high-performance methanol oxidation

Single-atom catalysts have been widely investigated for several electrocatalytic reactions except electrochemical alcohol oxidation. Herein, we synthesize atomically dispersed platinum on ruthenium oxide (Pt₁/RuO₂) using a simple impregnation-adsorption method. We find that Pt₁/RuO₂ has good electrocatalytic activity towards methanol oxidation in an alkaline media with a mass activity that is 15.3-times higher than that of commercial Pt/C (6766 vs. 441 mA mg^‒1_Pt). In contrast, single atom Pt on carbon black is inert. Further, the mass activity of Pt₁/RuO₂ is superior to that of most Pt-based catalysts previously developed. Moreover, Pt₁/RuO₂ has a high tolerance towards CO poisoning, resulting in excellent catalytic stability. Ab initio simulations and experiments reveal that the presence of Pt‒O_3f (3-fold coordinatively bonded O)‒Ru_cus (coordinatively unsaturated Ru) bonds with the undercoordinated bridging O in Pt₁/RuO₂ favors the electrochemical dehydrogenation of methanol with lower energy barriers and onset potential than those encountered for Pt‒C and Pt‒Ru.

It is still challenging to engineer single-atom catalysts for electrocatalytic methanol oxidation. Here, the authors design Pt single atom supported on RuO2 for highly active methanol oxidation in contrast to the inert Pt single atom supported on carbon.

Rod-like nickel doped Co3Se4/reduced graphene oxide hybrids as efficient electrocatalysts for oxygen evolution reactions

In the oxygen evolution reaction (OER), highly active catalysts are essential for reducing the overpotential and improving the slow kinetics of the process. Cobalt selenide (Co₃Se₄) has always been considered as a promising electrocatalyst for the OER due to the well-suited electronic configuration of the Co ions in it. However, poor exposure of the active sites and low electron conductivity are still its biggest problems. In this study, we report an efficient Ni-doped rod-like Co₃Se₄ hybridized with reduced graphene oxide (Ni-Co₃Se₄/rGO) as an OER electrocatalyst. The Ni doping regulates the electronic structure of Co₃Se₄ and significantly reduces the overpotential of Co₃Se₄ toward the OER under alkaline conditions. Simultaneously, hybridization of the reduced graphene oxide (rGO) enhances the conductivity which leads to the improvement in OER activity. The Ni-Co₃Se₄/rGO catalyst shows a lower overpotential (284 mV at 10 mA cm^-2) as well as a Tafel slope (71 mV dec^-1), which outperformed the benchmark of commercial RuO₂. Moreover, Ni-Co₃Se₄/rGO also shows high stability and long-term durability.

Carbon-Based Nanocages: A New Platform for Advanced Energy Storage and Conversion

Energy storage and conversion play a crucial role in modern energy systems, and the exploration of advanced electrode materials is vital but challenging. Carbon-based nanocages consisting of sp² carbon shells feature a hollow interior cavity with sub-nanometer microchannels across the shells, high specific surface area with a defective outer surface, and tunable electronic structure, much different from the intensively studied nanocarbons such as carbon nanotubes and graphene. These structural and morphological characteristics make carbon-based nanocages a new platform for advanced energy storage and conversion. Up-to-date synthetic strategies of carbon-based nanocages, the utilization of their unique porous structure and morphology for the construction of composites with foreign active species, and their significant applications to the advanced energy storage and conversion are reviewed. Structure-performance correlations are discussed in depth to highlight the contribution of carbon-based nanocages. The research challenges and trends are also envisaged for deepening and extending the study and application of this multifunctional material.

Synergism of Multicomponent Catalysis: One-Dimensional Pt-Rh-Pd Nanochain Catalysts for Efficient Methanol Oxidation

Designing Pt-based alloy catalysts with multicomponent composition and a controllable structure is important to improve the utilization efficiency of precious metals and catalytic activity, but it still face a lot of challenges for simple preparation. Herein, we used insulin amyloid fibrils as templates and their own one-dimensional spiral structure to synthesize Pt-Rh-Pd ternary alloy nanochains under mild conditions. The prepared Pt-Rh-Pd alloy nanochains (NCs) have uniform diameter, and the particle size is only 2 nm. This ultrafine structure increases the specific surface area of the catalyst to a certain extent, and the synergistic effect of the three metals improves the catalytic performance. Compared with commercial Pt/C and binary Pt-Rh NCs, the as-presented Pt-Rh-Pd NCs show better methanol oxidation activity ability and stability against CO poisoning. The peak current density of front sweep is 1.48 mA cm-2, which is 1.7 times higher than that of commercial Pt/C (0.89 mA cm-2) and 1.4 times higher than that of the Pt-Rh NCs (1.07 mA cm-2), indicating great application potential as high-performance electrocatalysts in fuel cells.

The simplest construction of single-site catalysts by the synergism of micropore trapping and nitrogen anchoring

Single-site catalysts feature high catalytic activity but their facile construction and durable utilization are highly challenging. Herein, we report a simple impregnation-adsorption method to construct platinum single-site catalysts by synergic micropore trapping and nitrogen anchoring on hierarchical nitrogen-doped carbon nanocages. The optimal catalyst exhibits a record-high electrocatalytic hydrogen evolution performance with low overpotential, high mass activity and long stability, much superior to the platinum-based catalysts to date. Theoretical simulations and experiments reveal that the micropores with edge-nitrogen-dopants favor the formation of isolated platinum atoms by the micropore trapping and nitrogen anchoring of [PtCl₆]^2-, followed by the spontaneous dechlorination. The platinum-nitrogen bonds are more stable than the platinum-carbon ones in the presence of adsorbed hydrogen atoms, leading to the superior hydrogen evolution stability of platinum single-atoms on nitrogen-doped carbon. This method has been successfully applied to construct the single-site catalysts of other precious metals such as palladium, gold and iridium.

In Situ Construction of Small Pt NPs Embedded in 3D Spherical Porous Carbon as an Electrocatalyst for Liquid Fuel Oxidation with High Performance

The realization of small platinum (Pt) nanoparticles (NPs) embedded in conductive porous carbon would largely improve the catalytic activity effectively with more durability, although there remain challenges to achieve such hybrid nanostructures via a simple synthetic route. Here, an efficient and facile profile was demonstrated for the synthesis of one kind of uniform three-dimensional (3D) spherical Pt/C composite electrocatalyst with small monodispersed Pt NPs embedded in the matrix of 3D spherical porous carbon derived from the corresponding spherically polymeric Pt(II) complex. The monodispersed Pt NPs within the uniform 3D Pt/C composite are ∼4.4 nm and they are dispersed homogeneously within the matrix of 3D spherical porous carbon. Investigations showed that the 3D Pt/C composite exhibits high catalytic performances as compared to the commercial catalyst of Pt black for oxidation reactions of ethylene glycol, ethanol, and methanol. This strategy developed in the present study would be available for possible fabrication of some other active 3D porous carbon-supported Pt-based catalysts including their bimetallic and multimetallic counterparts.