Catalytic Silylation of Dinitrogen by a Family of Triiron Complexes

Iron(I) Complex Bearing an Open-Shell Diazenido Ligand

Low-valent transition-metal diazenido species are important intermediates in transition-metal-mediated dinitrogen reduction reactions. Isolable complexes of the type unanimously feature closed-shell diazenido ligands. Those bearing open-shell diazenido ligands have remained elusive. Herein, we report the synthesis, characterization, and reactivity of a d7 iron(I) complex featuring an open-shell silyldiazenido ligand, [(ICy)Fe(NNSiiPr3)(η2:η2-dvtms)] (1, ICy = 1,3-dicyclohexylimidazole-2-ylidene, dvtms = divinyltetramethyldisiloxane). Complex 1 is prepared in good yield by silylation of the iron(-I)-N2 complex [K(18-crown-6)][(ICy)Fe(N2)(η2:η2-dvtms)] with iPr3SiOTf and has been fully characterized by various spectroscopic methods. Theoretical studies, in combination with characterization data, established an S = 1/2 ground spin-state for 1 that can best be described as a quartet iron(I) center featuring an antiferromagnetically coupled triplet silyldiazenido ligand. The diazenido and alkene ligands in 1 are labile, as indicated by the facile disproportionation reaction of 1 at ambient temperature to transform into the iron(II) bis(diazenido) species [(ICy)(NNSiiPr3)2Fe(dvtms)Fe(NNSiiPr3)2(ICy)] (2) and the iron(0) species [(ICy)Fe(η2:η2-dvtms)] and also the alkene-exchange reaction of 1 with PhCH═CHBC8H14 to form [(ICy)Fe(NNSiiPr3)(η2-trans-PhCH═CHBC8H14)] (3). Complex 1 is light-sensitive. Upon photolysis, it undergoes a SiiPr3 radical-transfer reaction to yield [(ICy)Fe(σ:η2-MeCHSiMe2OSiMe2CH═CHSiiPr3)] (4) and N2. The reactions of 1 with the trityl radical and organic bromides yield iron(II) complexes, which indicates its reducing nature. Moreover, 1 is a weak hydrogen-atom abstractor, as indicated by its inertness toward HSi(SiMe3)3 and cyclohexa-1,4-diene and the low calculated N-H bond dissociation energy (48 kcal/mol) of its corresponding iron(II) iso-hydrazenido species.

Reversible dioxygen uptake at [Cu4] clusters

Dioxygen binding solely through non-covalent interactions is rare. In living systems, dioxygen transport takes place via iron or copper-containing biological cofactors. Specifically, a reversible covalent interaction is established when O2 binds to the mono or polynuclear metal center. However, O2 stabilization in the absence of covalent bond formation is challenging and rarely observed. Here, we demonstrate a unique example of reversible non-covalent binding of dioxygen within the cavity of a well-defined synthetic all-Cu(i) tetracopper cluster.

Synthesis of Bis(silylene) Iron Chlorides and Their Catalytic Activity for Dinitrogen Silylation

In this study, three tetracoordinated bis(silylene) iron(II) chlorides, namely, [SiCHRSi]FeCl2 (1) (R = H), (2) (R = CH3), and (3) (R = Ph), were synthesized through the reactions of the three different bis(silylene) ligands [LSiCHRSiL] (L = PhC(NtBu)2, L1 (R = H), L2 (R = CH3), L3 (R = Ph)) with FeCl2·(THF)1.5 in THF. The bis(silylene) Fe complexes 1-3 could be used as effective catalysts for dinitrogen silylation, with complex 3 demonstrating the highest turnover number (TON) of 746 equiv among the three complexes. The catalytic mechanism was explored, revealing the involvement of the pentacoordinated bis(dinitrogen) iron(0) complexes [SiCHRSi]Fe(N2)2(THF), (4)-(6), as the active catalysts in the dinitrogen silylation reaction. Additionally, the cyclic silylene compound 10 was obtained from the reaction of L1 with KC8. Single-crystal X-ray diffraction analyses confirmed the molecular structures of complexes 1-3 and 10 in the solid state.

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N2 Reduction

We recently reported a reaction sequence that activates C-H bonds in simple arenes as well as the N-N triple bond in N₂, delivering the aryl group to N₂ to form a new N-C bond (Nature 2020, 584, 221). This enables the transformation of abundant feedstocks (arenes and N₂) into N-containing organic compounds. The key N-C bond forming step occurs upon partial silylation of N₂. However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N₂ must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)-NN(SiMe₃)₂ intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi₂ ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N-C bond formation offers a method for functionalizing N₂ using organometallic chemistry.

Molecular Electrochemical Reductive Splitting of Dinitrogen with a Molybdenum Complex

Nitrogen reduction under mild conditions (room T and atmospheric P), using a non-fossil source of hydrogen remains a challenge. Molecular metal complexes, notably Mo based, have recently been shown to be active for such nitrogen fixation. We report electrochemical N₂ splitting with a Mo^III triphosphino complex [(PPP)MoI₃ ], at room temperature and a moderately negative potential. A Mo^IV nitride species was generated, which is confirmed by electrochemistry and NMR studies. The reaction goes through two successive one electron reductions of the starting Mo species, coordination of a N₂ molecule, and further splitting to a Mo^IV nitride complex. Preliminary DFT studies support the formation of a bridging Mo^I N₂ Mo^I dinitrogen dimer evolving to the Mo nitride via a low energy transition state. This example joins a short list of molecular complexes for N₂ electrochemical reductive cleavage. It opens a door to electrochemical proton-coupled electron transfer (PCET) conversion studies of N₂ to NH₃ .

Synthesis and Reactivity of Cobalt-Dinitrogen Complexes Bearing Anionic PCP-Type Pincer Ligands toward Catalytic Silylamine Formation from Dinitrogen

A series of cobalt(I)-dinitrogen complexes bearing anionic 4-substituted benzene-based PCP-type pincer ligands are synthesized and characterized. These complexes work as highly efficient catalysts for the formation of silylamine from dinitrogen under ambient reaction conditions to produce up to 371 equiv of silylamine based on the cobalt atom of the catalyst.

Revealing redox isomerism in trichromium imides by anomalous diffraction

In polynuclear biological active sites, multiple electrons are needed for turnover, and the distribution of these electrons among the metal sites is affected by the structure of the active site. However, the study of the interplay between structure and redox distribution is difficult not only in biological systems but also in synthetic polynuclear clusters since most redox changes produce only one thermodynamically stable product. Here, the unusual chemistry of a sterically hindered trichromium complex allowed us to probe the relationship between structural and redox isomerism. Two structurally isomeric trichromium imides were isolated: asymmetric terminal imide (^tbsL)Cr₃(NDipp) and symmetric, μ³-bridging imide (^tbsL)Cr₃(μ³–NBn) ((^tbsL)⁶⁻ = (1,3,5-C₆H₉(NC₆H₄-o-NSi^tBuMe₂)₃)⁶⁻). Along with the homovalent isocyanide adduct (^tbsL)Cr₃(CNBn) and the bisimide (^tbsL)Cr₃(μ³–NPh)(NPh), both imide isomers were examined by multiple-wavelength anomalous diffraction (MAD) to determine the redox load distribution by the free refinement of atomic scattering factors. Despite their compositional similarities, the bridging imide shows uniform oxidation of all three Cr sites while the terminal imide shows oxidation at only two Cr sites. Further oxidation from the bridging imide to the bisimide is only borne at the Cr site bound to the second, terminal imido fragment. Thus, depending on the structural motifs present in each [Cr₃] complex, MAD revealed complete localization of oxidation, partial localization, and complete delocalization, all supported by the same hexadentate ligand scaffold.

Application of high-resolution Multiwavelength Anomalous Diffraction (MAD) allows the assignment of localized, partly delocalized, and fully delocalized oxidation in a series of trichromium imide isomers.

Synthesis of silyl iron dinitrogen complexes for activation of dihydrogen and catalytic silylation of dinitrogen

Three novel iron dinitrogen hydrides, [FeH(ⁱPr-PSi^MeP)(N₂)(PMe₃)] (1), [FeH(ⁱPr-PSi^PhP)(N₂)(PMe₃)] (2), and [FeH(ⁱPr-PSi^Ph)(N₂)(PMe₃)] (3), supported by a silyl ligand are synthesized for the first time by changing the electronic effect and steric hindrance of the ligands through the reaction of ligands L1-L3 with Fe(PMe₃)₄ in a nitrogen atmosphere. The ligands containing an electron-donating group with large steric hindrance on the phosphorus atom are beneficial for the formation of dinitrogen complexes. A penta-coordinate iron hydride [FeH(ⁱPr-PSi^Ph)(PMe₃)₂] (4) was formed through the reaction of ligand L3 with Fe(PMe₃)₄ in an argon atmosphere under the same conditions. The reactions between complexes 1-3 with an atmospheric pressure of dihydrogen gas resulted in Fe(II) dihydrides, [(ⁱPr-PSi^Me(μ-H)P)Fe(H)₂(PMe₃)] (5), [(ⁱPr-PSi^Ph(μ-H)P)Fe(H)₂(PMe₃)] (6) and [(iPr-PSi^Ph(μ-H))Fe(H)₂(PMe₃)₂] (7), with an η²-(Si-H) coordination. The isolation of dihydrides 5-7 demonstrates the ability of the dinitrogen complexes 1-3 to realize the activation of dihydrogen under ambient temperature and pressure. The molecular structures of complexes 1-7 were elucidated by single crystal X-ray diffraction analysis. The iron dinitrogen hydrides 1-3 are effective catalysts for the silylation of dinitrogen under ambient conditions and among them 3 is the best catalyst.

Fixation of Dinitrogen at an Asymmetric Binuclear Titanium Complex

A new type of dititanium dinitrogen complex supported by a triphenolamine (TPA) ligand is reported. Analysis by single-crystal X-ray diffraction and Raman and NMR spectroscopy reveals different coordination geometries for the two titanium centers. Hence, coordination of TPA and a nitrogen ligand results in trigonal-bipyramidal geometry, while an octahedral titanium center is obtained upon additional coordination of an ethoxide generated upon C-O bond cleavage in a diethyl ether solvent molecule. The titanium complex successfully generates ammonia in the presence of an excess amount of PCy₃HI and KC₈ in 154% yield (per titanium atom). A titanium complex with a bulkier TPA does not form a dinitrogen complex, and mononuclear titanium dinitrogen complexes were not accessible, presumably because of the high tendency of early transition metals to form binuclear dinitrogen complexes.

Ammonia Formation Catalyzed by a Dinitrogen-Bridged Dirhenium Complex Bearing PNP-Pincer Ligands under Mild Reaction Conditions*

A series of rhenium complexes bearing a pyridine-based PNP-type pincer ligand are synthesized from rhenium phosphine complexes as precursors. A dinitrogen-bridged dirhenium complex bearing the PNP-type pincer ligands catalytically converts dinitrogen into ammonia during the reaction with KC₈ as a reductant and [HPCy₃ ]BAr^F ₄ (Cy=cyclohexyl, Ar^F =3,5-(CF₃ )₂ C₆ H₃ ) as a proton source at -78 °C to afford 8.4 equiv of ammonia based on the rhenium atom of the catalyst. The rhenium-dinitrogen complex also catalyzes silylation of dinitrogen in the reaction with KC₈ as a reductant and Me₃ SiCl as a silylating reagent under ambient reaction conditions to afford 11.7 equiv of tris(trimethylsilyl)amine based on the rhenium atom of the catalyst. These results demonstrate the first successful example of catalytic nitrogen fixation under mild reaction conditions using rhenium-dinitrogen complexes as catalysts.

[2Fe-2S] Cluster Supported by Redox-Active o-Phenylenediamide Ligands and Its Application toward Dinitrogen Reduction

As prevalent cofactors in living organisms, iron-sulfur clusters participate in not only the electron-transfer processes but also the biosynthesis of other cofactors. Many synthetic iron-sulfur clusters have been used in model studies, aiming to mimic their biological functions and to gain mechanistic insight into the related biological systems. The smallest [2Fe-2S] clusters are typically used for one-electron processes because of their limited capacity. Our group is interested in functionalizing small iron-sulfur clusters with redox-active ligands to enhance their electron storage capacity, because such functionalized clusters can potentially mediate multielectron chemical transformations. Herein we report the synthesis, structural characterization, and catalytic activity of a diferric [2Fe-2S] cluster functionalized with two o-phenylenediamide ligands. The electrochemical and chemical reductions of such a cluster revealed rich redox chemistry. The functionalized diferric cluster can store up to four electrons reversibly, where the first two reduction events are ligand-based and the remainder metal-based. The diferric [2Fe-2S] cluster displays catalytic activity toward silylation of dinitrogen, affording up to 88 equiv of the amine product per iron center.

Predicting Dinitrogen Activation via Transition-Metal-Involved [4+2] Cycloaddition Reaction

As the strongest triple bond in nature, the N≡N triple bond activation has always been a challenging project in chemistry. On the other hand, since the award of the Nobel Prize in Chemistry in 1950, the Diels-Alder reaction has served as a powerful and widely applied tool in the synthesis of natural products and new materials. However, the application of the Diels-Alder reaction to dinitrogen activation remains less developed. Here we first demonstrate that a transition-metal-involved [4+2] Diels-Alder cycloaddition reaction could be used to activate dinitrogen without an additional reductant by density functional theory calculations. Further study reveals that such a dinitrogen activation by 1-metalla-1,3-dienes screened out from a series of transition metal complexes (38 species) according to the effects of metal center, ligand, and substituents can become favorable both thermodynamically (with an exergonicity of 28.2 kcal mol^-1 ) and kinetically (with an activation energy as low as 13.8 kcal mol^-1 ). Our findings highlight an important application of the Diels-Alder reaction in dinitrogen activation, inviting experimental chemists' verification.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Dinitrogen Insertion and Cleavage by a Metal-Metal Bonded Tricobalt(I) Cluster

Reduction of a tricobalt(II) tri(bromide) cluster supported by a tris(β-diketiminate) cyclophane results in halide loss, ligand compression, and metal-metal bond formation to yield a 48-electron Co^I₃ cluster, Co₃L^Et/Me (2). Upon reaction of 2 with dinitrogen, all metal-metal bonds are broken, steric conflicts are relaxed, and dinitrogen is incorporated within the internal cavity to yield a formally (μ₃-η¹:η²:η¹-dinitrogen)tricobalt(I) complex, 3. Broken symmetry DFT calculations (PBE0/def2-tzvp/D3) support an N-N bond order of 2.1 in the bound N₂ with the calculated N-N stretching frequency (1743 cm^-1) comparable to the experimental value (1752 cm^-1). Reduction of 3 under Ar in the presence of Me₃SiBr results in N₂ scission with tris(trimethylsilyl)amine afforded in good yield.

Tuning metal-metal interactions for cooperative small molecule activation

Cluster complexes have attracted interest for decades due to their promise of drawing analogies to metallic surfaces and metalloenzyme active sites, but only recently have chemists started to develop ligand scaffolds that are specifically designed to support multinuclear transition metal cores. Such ligands not only hold multiple metal centers in close proximity but also allow for fine-tuning of their electronic structures and surrounding steric environments. This Feature Article highlights ligand designs that allow for cooperative small molecule activation at cluster complexes, with a particular focus on complexes that contain metal-metal bonds. Two useful ligand-design elements have emerged from this work: a degree of geometric flexibility, which allows for novel small molecule activation modes, and the use of redox-active ligands to provide electronic flexibility to the cluster core. The authors have incorporated these factors into a unique class of dinucleating macrocycles (nPDI2). Redox-active fragments in nPDI2 mimic the weak-overlap covalent bonding that is characteristic of M-M interactions, and aliphatic linkers in the ligand backbone provide geometric flexibility, allowing for interconversion between a range of geometries as the dinuclear core responds to the requirements of various small molecule substrates. The union of these design elements appears to be a powerful combination for analogizing critical aspects of heterogeneous and metalloenzyme catalysts.

Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes

Dinitrogen (N2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N2 functionalization reactions following these strategies.

Cleavage of cluster iron-sulfide bonds in cyclophane-coordinated FenSm complexes

Reaction of the tri(μ-sulfido)triiron(iii) tris(β-diketiminate) cyclophane complex, Fe3S3LEt/Me (1), or of the di(μ-sulfido)diiron(iii) complex Fe2S2HLEt/Me (5), with the related tri(bromide)triiron(ii) complex Fe3Br3LEt/Me (2) results in electron and ligand redistribution to yield the mixed-ligand multiiron complexes, including Fe3Br2SLEt/Me (3) and Fe2Br2SHLEt/Me (4). The cleavage and redistribution observed in these complexes is reminiscent of necessary Fe-S bond cleavage for substrate activation in nitrogenase enzymes, and provides a new perspective on the lability of Fe-S bonds in FeS clusters.

Synthetic Factors Governing Access to Tris(β-diketimine) Cyclophanes versus Tripodal Tri-β-aminoenones

Tris(β-diketimine) cyclophanes are an important ligand class for investigating cooperative multimetallic interactions of bioinorganic clusters. Discussed herein are the synthetic factors governing access to tris(β-diketimine) cyclophanes versus tripodal tri-β-aminoenones. Cyclophanes bearing Me, Et, and MeO cap substituents and β-Me, Et, or Ph arm substituents are obtained, and a modified condensation method produced α-Me β-Me cyclophane. These operationally simple procedures produce the ligands in gram quantities and in 22-94% yields.

Coupling dinitrogen and hydrocarbons through aryl migration

A persistent challenge in chemistry is to activate abundant, yet inert molecules such as hydrocarbons and atmospheric N₂. In particular, forming C–N bonds from N₂ typically requires a reactive organic precursor¹, which limits the ability to design catalytic cycles. Here, we report an diketiminate-supported iron system that is able to sequentially activate benzene and N₂ to form aniline derivatives. The key to this new coupling reaction is the partial silylation of a reduced iron-N₂ complex, which is followed by migratory insertion of a benzene-derived phenyl group to the nitrogen. Further reduction releases the nitrogen products, and the resulting iron species can re-enter the cyclic pathway. Using a mixture of sodium powder, crown ether, and trimethylsilyl bromide, an easily prepared diketiminate iron bromide complex² can mediate the one-pot conversion of several petroleum-derived compounds into the corresponding silylated aniline derivatives using N₂ as the nitrogen source. Numerous compounds along the cyclic pathway have been isolated and crystallographically characterized; their reactivity outlines the mechanism including the hydrocarbon activation step and the N₂ functionalization step. This strategy incorporates nitrogen atoms from N₂ directly into abundant hydrocarbons.

Synthesis of Dinuclear Mo-Fe Hydride Complexes and Catalytic Silylation of N2

Two transition-metal atoms bridged by hydrides may represent a useful structural motif for N₂ activation by molecular complexes and the enzyme active site. In this study, dinuclear Mo^IV -Fe^II complexes with bridging hydrides, Cp^R Mo(PMe₃ )(H)(μ-H)₃ FeCp* (2 a; Cp^R =Cp*=C₅ Me₅ , 2 b; Cp^R =C₅ Me₄ H), were synthesized via deprotonation of Cp^R Mo(PMe₃ )H₅ (1 a; Cp^R =Cp*, 1 b; Cp^R =C₅ Me₄ H) by Cp*FeN(SiMe₃ )₂ , and they were characterized by spectroscopy and crystallography. These Mo-Fe complexes reveal the shortest Mo-Fe distances ever reported (2.4005(3) Å for 2 a and 2.3952(3) Å for 2 b), and the Mo-Fe interactions were analyzed by computational studies. Removal of the terminal Mo-H hydride in 2 a-2 b by [Ph₃ C]⁺ in THF led to the formation of cationic THF adducts [Cp^R Mo(PMe₃ )(THF)(μ-H)₃ FeCp*]⁺ (3 a; Cp^R =Cp*, 3 b; Cp^R =C₅ Me₄ H). Further reaction of 3 a with LiPPh₂ gave rise to a phosphido-bridged complex Cp*Mo(PMe₃ )(μ-H)(μ-PPh₂ )FeCp* (4). A series of Mo-Fe complexes were subjected to catalytic silylation of N₂ in the presence of Na and Me₃ SiCl, furnishing up to 129±20 equiv of N(SiMe₃ )₃ per molecule of 2 b. Mechanism of the catalytic cycle was analyzed by DFT calculations.

NH3 formation from N2 and H2 mediated by molecular tri-iron complexes

Living systems carry out the reduction of N₂ to ammonia (NH₃) through a series of protonation and electron transfer steps under ambient conditions using the enzyme nitrogenase. In the chemical industry, the Haber-Bosch process hydrogenates N₂ but requires high temperatures and pressures. Both processes rely on iron-based catalysts, but molecular iron complexes that promote the formation of NH₃ on addition of H₂ to N₂ have remained difficult to devise. Here, we isolate the tri(iron)bis(nitrido) complex [(Cp'Fe)₃(μ₃-N)₂] (in which Cp' = η⁵-1,2,4-(Me₃C)₃C₅H₂), which is prepared by reduction of [Cp'Fe(μ-I)]₂ under an N₂ atmosphere and comprises three iron centres bridged by two μ₃-nitrido ligands. In solution, this complex reacts with H₂ at ambient temperature (22 °C) and low pressure (1 or 4 bar) to form NH₃. In the solid state, it is converted into the tri(iron)bis(imido) species, [(Cp'Fe)₃(μ₃-NH)₂], by addition of H₂ (10 bar) through an unusual solid-gas, single-crystal-to-single-crystal transformation. In solution, [(Cp'Fe)₃(μ₃-NH)₂] further reacts with H₂ or H⁺ to form NH₃.

Evaluating Metal Ion Identity on Catalytic Silylation of Dinitrogen Using a Series of Trimetallic Complexes

We report catalytic silylation of dinitrogen to tris(trimethylsilyl)amine by a series of trinuclear first row transition metal complexes (M = Cr, Mn, Fe, Co, Ni) housed in our tris(β-diketiminate) cyclophane (L ^3- ). Yields are expectedly dependent on metal ion type ranging from 14 to 199 equiv NH₄ ⁺/complex after protonolysis for the Mn to Co congeners, respectively. For the series of complexes, the number of turnovers trend observed is Co > Fe > Cr > Ni > Mn, consistent with prior reports of greater efficacy of Co over Fe in other ligand systems for this reaction.

Dinitrogen activation by a penta-pyridyl molybdenum complex

A new dinitrogen (N₂) molybdenum(0) complex supported exclusively by pyridine ligands was synthesized.

Controlling dinitrogen functionalization at rhenium through alkali metal ion pairing

The rhenium(i) salt Na[Re(η⁵-Cp)(BDI)] can be cooled in solution under a dinitrogen atmosphere to selectively access complexes containing rhenium(iii) centers bound to direduced, doubly-bonded N₂ (i.e. diazenide) fragments. We demonstrate this reactivity is critically dependent on ion pairing involving the Na⁺ ion in the starting material, as N₂ binding by Na[Re(η⁵-Cp)(BDI)] proved to be much less favorable when the Na⁺ was sequestered by benzo-12-crown-4. The analogous chemistry of Na[Re(η⁵-Cp)(BDI)] with carbon monoxide (CO) and 2,6-xylylisocyanide (XylNC) was also investigated, which provided structural and spectroscopic bases for determining the impact of ion pairing on π-acid activation in this system.

Catalytic reduction of dinitrogen to tris(trimethylsilyl)amine using rhodium complexes with a pyrrole-based PNP-type pincer ligand

Rhodium complexes bearing an anionic pyrrole-based PNP-type pincer ligand are synthesised and found to work as effective catalysts for the transformation of molecular dinitrogen into tris(trimethylsilyl)amine under mild reaction conditions. This is the first successful example of rhodium-catalysed dinitrogen reduction under mild reaction conditions.

Dinitrogen Activation and Functionalization using β-Diketiminate Iron Complexes

Iron catalysts are adept at breaking the N-N bond of N₂, as exemplified by the iron-catalyzed Haber-Bosch process and the iron-containing clusters at the active sites of nitrogenase enzymes. This Minireview summarizes recent work that has identified a well-characterized set of multi-iron complexes that are capable of breaking and functionalizing N₂, and are amenable to detailed mechanistic studies. We discuss the redox balancing, the potential intermediates during N₂ activation, the variation of alkali metal reductant, the reversibility of N₂ cleavage, and the formation of N-H and N-C bonds from N₂.

Conversion of dinitrogen to tris(trimethylsilyl)amine catalyzed by titanium triamido-amine complexes

By using a triaryl-Tren ligated titanium dinitrogen complex, K2[{(Xy-N3N)Ti}2(μ2-N2)] (3), prepared by two-electron reduction of [TiCl(Xy-N3N)] (1-Cl) under N2 atmosphere, catalytic fixation of molecular nitrogen to form tris(trimethylsilyl)amine was achieved under ambient conditions with a turnover number (TON) of up to 16.5 per titanium atom.

Cyclophanes as Platforms for Reactive Multimetallic Complexes

Multimetallic cofactors supported by weak-field donors frequently function as reaction centers in metalloproteins, and many of these cofactors catalyze small molecule activation (e.g., N₂, O₂, CO₂) with prominent roles in geochemical element cycles or detoxification. Notable examples include the iron-molybdenum cofactor of the molybdenum-dependent nitrogenases, which catalyze N₂ fixation, and the NiFe₄S₄ cluster and the Mo(O)SCu site in various carbon monoxide dehydrogenases. The prevailing proposed reaction mechanisms for these multimetallic cofactors relies on a cooperative pathway, in which the oxidation state changes are distributed over the aggregate coupled with orbital overlap between the substrate and more than one metal ion within the cluster. Such cooperativity has also been proposed for chemical transformations at the surfaces of heterogeneous catalysts. However, the design details that afford cooperative effects and allow such reactivity to be harnessed effectively in homogeneous synthetic systems remain unclear. Relatedly, hydride donors ligated to these metal cluster cofactors are suggested as precursors to the state that reacts with substrates; here too, however, the reactivity of hydride-decorated clusters supported by weak-field ligands is underexplored. Inspired by the reactivity potential of multimetallic assemblies evidenced in biological systems, approaches to design, synthesize, and evaluate reactivity of polynuclear metal compounds have been actively explored. In a similar vein to the templating function afforded by enzyme active sites, a carefully engineered organic ligand can be employed to control metal nuclearity of the complex and the local coordination environment of each metal center. This Account presents our efforts within this field, beginning with ligand design considerations followed by a survey of observed small molecule activation by trimetallic cyclophanates. We highlight the distinct reactivity outcomes accessed by multimetallic compounds as compared to aggregates that assemble in reaction mixtures from monometallic precursors. Contributing to the opportunity for programmed cooperativity in these designed multimetallic compounds, the cyclophane also dictates the orientation of substrate binding and metal-substrate interactions, which has a prominent influence on reactivity. For example, the dinitrogen-tricopper(I) cyclophanate reacts with dioxygen with markedly different results as compared to monocopper compounds. As an unexpected outcome, one series of tricopper compounds were discovered to be competent catalysts for carbon dioxide reduction to oxalate-a formally one-electron process-hinting at an inherently broader reaction scope for weak-field clusters at lowering the barrier for one-electron pathways as well as multielectron redox transformations. Further reflecting the role of the ligand in tuning reactivity, the trimetallic trihydride cluster compounds, [M₃(μ-H)₃]³⁺ (M = Fe^II, Co^II, Zn^II), demonstrate substrate specificity for CO₂ over various other unsaturated molecules and surprising stability toward water. This series reflects the role of the local environment of a shallow ligand pocket to control substrate access. Summed together, the systems described here evidence the anticipated cooperative reactivity accessed in designed multimetallic species vs self-assembled monometallic systems (e.g., O₂ activation and O atom transfer) as well as control of substrate access by seemingly subtle structural effects. Indeed, future efforts aim to interrogate the limits of cooperativity in these systems as well as the role of ligand dynamics and sterics on reactivity.

Triphos–Fe dinitrogen and dinitrogen–hydride complexes: relevance to catalytic N2 reductions

Mechanistic investigations of the catalyzed reduction of N₂ with a rare (tridentate phosphine)Fe(0) bis dinitrogen complex.