Synthesis of Porous Polymeric Catalysts for the Conversion of Carbon Dioxide

Superlative Porous Organic Polymers for Photochemical and Electrochemical CO2 Reduction Applications: From Synthesis to Functionality

To mimic the carbon cycle at a kinetically rapid pace, the sustainable conversion of omnipresent CO2 to value-added chemical feedstock and hydrocarbon fuels implies a remarkable prototype for utilizing released CO2. Porous organic polymers (POPs) have been recognized as remarkable catalytic systems for achieving large-scale applicability in energy-driven processes. POPs offer mesoporous characteristics, higher surface area, and superior optoelectronic properties that lead to their relatively advanced activity and selectivity for CO2 conversion. In comparison to the metal organic frameworks, POPs exhibit an enhanced tendency toward membrane formation, which governs their excellent stability with regard to remarkable ultrathinness and tailored pore channels. The structural ascendancy of POPs can be effectively utilized to develop cost-effective catalytic supports for energy conversion processes to leapfrog over conventional noble metal catalysts that have nonlinear techno-economic equilibrium. Herein, we precisely surveyed the functionality of POPs from scratch, classified it, and provided a critical commentary of its current methodological advancements and photo/electrochemical achievements in the CO2 reduction reaction.

Conjugated Microporous Polymers for Catalytic CO2 Conversion

Rising carbon dioxide (CO2) levels in the atmosphere are recognized as a threat to atmospheric stability and life. Although this greenhouse gas is being produced on a large scale, there are solutions to reduction and indeed utilization of the gas. Many of these solutions involve costly or unstable technologies, such as air-sensitive metal-organic frameworks (MOFs) for CO2 capture or "non-green" systems such as amine scrubbing. Conjugated microporous polymers (CMPs) represent a simpler, cheaper, and greener solution to CO2 capture and utilization. They are often easy to synthesize at scale (a one pot reaction in many cases), chemically and thermally stable (especially in comparison with their MOF and covalent organic framework (COF) counterparts, owing to their amorphous nature), and, as a result, cheap to manufacture. Furthermore, their large surface areas, tunable porous frameworks and chemical structures mean they are reported as highly efficient CO2 capture motifs. In addition, they provide a dual pathway to utilize captured CO2 via chemical conversion or electrochemical reduction into industrially valuable products. Recent studies show that all these attractive properties can be realized in metal-free CMPs, presenting a truly green option. The promising results in these two fields of CMP applications are reviewed and explored here.

Recyclable N-Heterocyclic Carbene Porous Coordination Polymers with Two Distinct Metal Sites for Transformation of CO2 to Cyclic Carbonates

Single-component catalysts with integrated multiple reactive centers could work in concert to achieve enhanced activity tailored for specific catalytic reactions, but they remain underdeveloped. Herein, we report the construction of heterogeneous bimetallic porous coordination polymers (PCPs) containing both porphyrin and N-heterocyclic carbene (NHC) metal sites via the coordinative assembly of the NHC functionalities. Three heterobimetallic PCPs (TIPP-Zn-Pd, TIPP-Cu-Pd and TIPP-Ni-Pd) have been prepared to verify this facile synthetic strategy for the first time. In order to establish a cooperative action toward the catalytic CO2 cycloaddition with epoxides, an additional tetraalkylammonium bromide functionality has also been incorporated into these polymeric structures through the N-substituent of the NHC moieties. The resulting heterogeneous bimetallic catalyst TIPP-Zn-Pd exhibits the best catalytic performance in CO2 cycloaddition with styrene oxide (SO) under solvent-free conditions at atmospheric pressure and is applicable to a wide range of epoxides. More importantly, TIPP-Zn-Pd works smoothly and is recyclable in the absence of a cocatalyst under 1.0 MPa of CO2 at 60 °C. This indicates that TIPP-Zn-Pd is quite competitive with the reported heterogeneous catalysts, which typically require a high reaction temperature above 100 °C under cocatalyst-free conditions. Thus, this work provides a new approach to design heterogeneous bimetallic PCP catalysts for high-performance CO2 fixation under mild reaction conditions.

Urea-rich porous organic polymer as a hydrogen bond catalyst for Knoevenagel condensation reaction and synthesis of 2,3-dihydroquinazolin-4(1H)-ones

In this research, a new urea-rich porous organic polymer (urea-rich POP) as a hydrogen bond catalyst was synthesized via a solvothermal method. The physiochemical properties of the synthesized urea-rich POP were investigated by using different analyses like Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), energy-dispersive X-ray spectroscopy (EDS), elemental mapping analysis, X-ray diffraction analysis (XRD) and Brunauer-Emmett-Teller (BET) techniques. The preparation of urea-rich POP provides an efficacious platform for designing unique hydrogen bond catalytic systems. Accordingly, urea-rich POP, due to the existence of several urea moieties as hydrogen bond sites, has excellent performance as a catalyst for the Knoevenagel condensation reaction and multi-component synthesis of 2,3-dihydroquinazolin-4(1H)-ones.

Template-Oriented Polyaniline-Supported Palladium Nanoclusters for Reductive Homocoupling of Furfural Derivatives

Developing well-defined structures and desired properties for porous organic polymer (POP) supported catalysts by controlling their composition, size, and morphology is of great significance. Herein, we report a preparation of polyaniline (PANI) supported Pd nanoparticles (NPs) with controllable structure and morphology. The protocol involves the introduction of MnO2 with different crystal structures (α, β, γ, δ, ϵ) serving as both the reaction template and the oxidant. The different forms of MnO2 each convert aniline to a PANI that contains a unique regular distribution of benzene and quinone. This leads to the Pd/PANI catalysts with different charge transfer properties between Pd and PANI, as well as different dispersions of the metal NPs. In this case, the Pd/ϵ-PANI catalyst greatly improves the turnover frequency (TOF; to 88.3 h-1 ), in the reductive coupling of furfural derivatives to potential bio-based plasticizers. Systematic characterizations reveal the unique oxidation state of the support in the Pd/ϵ-PANI catalyst and coordination mode of Pd that drives the formation of highly dispersed Pd nanoclusters. Density functional theory (DFT) calculations show the more electron rich Pd/PANI catalyst has the lower energy barrier in the oxidative addition step, which favors the C-C coupling reaction.

Fe(III)-Anchored Porphyrin-Based Nanoporous Covalent Organic Frameworks for Green Synthesis of Cyclic Carbonates from Olefins and CO2 under Atmospheric Pressure Conditions

The utilization of carbon dioxide (CO2) as a C1 source coupled with olefins, readily accessible feedstocks, offers dual advantages of mitigating atmospheric carbon dioxide and green synthesis of valuable chemicals. In this regard, herein we demonstrate the application of Fe(III)-anchored porphyrin-based covalent organic framework (P-COF) as a promising recyclable catalyst for one-step generation of cyclic carbonates (CCs), value-added commodity chemicals from olefins and CO2, under mild atmospheric pressure conditions. Moreover, this one-pot synthesis was applied to transform various olefins (aliphatic and aromatic) into the corresponding CCs in good yield and selectivity. In addition, the Fe(III)@P-COF showed good recyclability and durability for multiple reuse cycles without losing its catalytic activity. Notably, this one-step synthesis strategy presents an eco-friendly, atom-economic alternative to the conventional two-step process requiring epoxides. This work represents a rare demonstration of porphyrin COF-catalyzed one-pot CC synthesis by utilizing readily available olefins at atmospheric pressure of carbon dioxide.

iClick synthesis of network metallopolymers

Described is an approach to preparing the first iClick network metallopolymers with porous properties. Treating digoldazido complex 2-AuN3 with trigoldacetylide 3-AuPPh3 or 3-AuPEt3, trialkyne 3-H, tetragoldacetylide 4-AuPPh3, or tetraalkyne 4-H in CH₂Cl₂ affords five iClick network metallopolymers 5-AuPPh3, 5-AuPEt3, 5-H, 6-AuPPh3, and 6-H. Confirmation of the iClick network metallopolymers comes from FTIR, ¹³C solid-state cross-coupling magic angle spinning (CPMAS) NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and nitrogen and CO₂ sorption analysis. Employing model complexes 7-AuPPh3, 7-AuPEt3, 7-H, 8-AuPPh3, and 8-H provides structural insights due to the insolubility of iClick network metallopolymers.

Ionic Conjugated Polymers as Heterogeneous Catalysts for the Cycloaddition of Carbon Dioxide to Epoxides to Form Carbonates under Solvent- and Cocatalyst-Free Conditions

The generation of cyclic carbonates by the cycloaddition of CO₂ with epoxides is attractive in the industry, by which CO₂ is efficiently used as C1 source. Herein, a series of catalysts were developed to efficient mediate the cycloaddition of CO₂ with epoxides to generate carbonates. The catalysts were easily synthesized via the amine-formaldehyde condensation of ethidium bromide with a variety of linkers. The newly prepared heterogeneous catalysts have high thermal stability and degradation temperatures. The surface of the catalysts is smooth and spherical in shape. The effect of temperature, pressure, reaction time and catalyst dosage on the cycloaddition of CO₂ with epoxide were investigated. The results show that the catalyst with 1,3,5-tris(4-formylphenyl)benzene as the linker can achieve 97.4 % conversion efficiency at the conditions of 100 °C, reaction time of 12 h, and the reaction pressure of 1.2 MPa in a solvent-free environment. Notably, the polymers serve as homogeneous catalysts during the reaction (reaction temperature above T_g ) and can be separated and recovered easily as homogeneous catalysts at room temperature. In addition, the catalyst is not only suitable for a wide range of epoxide substrates, but also can be recycled many times. Furthermore, DFT calculations show that the coordination between the electrophilic center of the catalyst and the epoxide reduces the energy barrier, and the reaction mechanism is proposed based on the reaction kinetic studies and DFT calculations.

Facile Construction of Carboxyl-Functionalized Ionic Polymer towards Synergistic Catalytic Cycloaddition of Carbon Dioxide into Cyclic Carbonates

The development of bifunctional ionic polymers as heterogeneous catalysts for effective, cocatalyst- and metal-free cycloaddition of carbon dioxide into cyclic carbonates has attracted increasing attention. However, facile fabrication of such polymers having high numbers of ionic active sites, suitable types of hydrogen bond donors (HBDs), and controlled spatial positions of dual active sites remains a challenging task. Herein, imidazolium-based ionic polymers with hydroxyl/carboxyl groups and high ionic density were facilely prepared by a one-pot quaternization reaction. Catalytic evaluation demonstrated that the presence of HBDs (hydroxyl or carboxyl) could enhance the catalytic activities of ionic polymers significantly toward the CO₂ cycloaddition reaction. Among the prepared catalysts, carboxyl-functionalized ionic polymer (PIMBr-COOH) displayed the highest catalytic activity (94% yield) in the benchmark cycloaddition reaction of CO₂ and epichlorohydrin, which was higher than hydroxyl-functionalized ionic polymer (PIMBr-OH, 76% yield), and far exceeded ionic polymer without HBDs groups (PIMBr, 54% yield). Furthermore, PIMBr-COOH demonstrated good recyclability and wide substrate tolerance. Under ambient CO₂ pressure, a number of epoxides were smoothly cycloadded into cyclic carbonates. Additionally, density functional theory (DFT) calculation verified the formation of strong hydrogen bonds between epoxide and the HBDs of ionic polymers. Furthermore, a possible mechanism was proposed based on the synergistic effect between carboxyl and Br⁻ functionalities. Thus, a facile, one-pot synthetic strategy for the construction of bifunctional ionic polymers was developed for CO₂ fixation.

Porous Organic Polymers: Promising Testbed for Heterogeneous Reactive Oxygen Species Mediated Photocatalysis and Nonredox CO2 Fixation

Catalysts play a pivotal role in achieving the global need for food and energy. In this context, porous organic polymers (POPs) with high surface area, robust architecture, tunable pore size, and chemical functionalities have emerged as promising testbeds for heterogeneous catalysis. Amorphous POPs having functionalized interconnected hierarchical porous structures activate a diverse range of substrates through covalent/non-covalent interactions or act as a host matrix to encapsulate catalytically active metal centers. On the other hand, conjugated POPs have been explored for photoinduced chemical transformations. In this personal account, we have delineated the evolution of various POPs and the specific role of pores and pore functionalities in heterogeneous catalysis. Subsequently, we retrospect our journey over the last ten years towards designing and fabricating amorphous POPs for heterogeneous catalysis, specifically photocatalytic reactive oxygen species (ROS)-mediated organic transformations and nonredox chemical fixation of CO₂ . We have also outlined some of the future avenues of POPs and POP-based hybrid materials for diverse catalytic applications.

Rational Design of Novel COF/MOF S-Scheme Heterojunction Photocatalyst for Boosting CO2 Reduction at Gas-Solid Interface

Solar-driven photoreduction of CO₂ into valuable fuels offers a sustainable technology to relieve the energy crisis as well as the greenhouse effect. Yet the exploration of highly efficient, selective, stable, and environmental benign photocatalysts for CO₂ reduction remains a major issue and challenge. The interfacial engineering of heterojunction photocatalysts could be a valid approach to boost the efficiency of the catalytic process. Herein, we propose a novel covalent organic framework/metal organic framework (COF/MOF) heterojunction photocatalyst, using olefin (C═C) linked covalent organic framework (TTCOF) and NH₂-UiO-66 (Zr) (NUZ) as representative building blocks, for enhanced CO₂ reduction to CO. The optimized TTCOF/NUZ exhibited a superior CO yield (6.56 μmol g^-1 h^-1) in gas-solid system when irradiated by visible light and only with H₂O (g) as weak reductant, and it was 4.4 and 5 times higher than pristine TTCOF and NUZ, respectively. The photogenerated electrons transfer route was proposed to follow the typical step-scheme (S-scheme), which was affirmed by XPS, in situ XPS and EPR characterizations. The boosting CO₂ photoreduction activity could be credited to the special charge carrier separation in S-scheme heterojunction, which can accelerate photogenerated electrons transportation and improve the redox ability at the interface. This work paves the way for the design and preparation of novel COF/MOF S-scheme heterostructure photocatalysts for CO₂ reduction.

Hybrid organic-inorganic membranes based on sulfonated poly (ether ether ketone) matrix and iron-encapsulated carbon nanotubes and their application in CO2 separation

The need to reduce greenhouse gas emissions dictates the search for new methods and materials. Here, a novel type of inorganic–organic hybrid materials Fe@MWCNT-OH/SPEEK (with a new type of CNT characterized by increased iron content, 5.80 wt%) for CO₂ separation is presented. The introduction of nanofillers into a polymer matrix has significantly improved hybrid membrane gas transport (D, P, S, and α_CO2/N2), and magnetic, thermal, and mechanical parameters. It was found that magnetic casting has improved the alignment and dispersion of Fe@MWCNT-OH carbon nanotubes. At the same time, CNT and polymer chemical modification enhanced interphase compatibility and membrane CO₂ separation efficiency. The thermooxidative stability, and mechanical and magnetic parameters of composites were improved by increasing new CNT loading. Cherazi's model turned out to be suitable for describing the CO₂ transport through analyzed hybrid membranes. The comparison of the transport and separation properties of the tested membranes with the literature data indicates their potential application in the future and the direction of further research.

Fe@MWCNT-OH/SPEEK hybrid membranes for CO₂ separation! Significant improvement of hybrid membrane's gas transport, magnetic, thermal, and mechanical parameters. Enhancement of interphase compatibility after CNT and polymer chemical modification.

Transforming Porous Silica Nanoparticles into Porous Liquids with Different Canopy Structures for CO2 Capture

Porous liquids (PLs) have both liquid fluidity and solid porosity, thereby offering a variety of applications, such as gas sorption and separation, homogeneous catalysis, energy storage, and so forth. In this research, canopies with varying structures were utilized to modify porous silica nanoparticles to develop Type I PLs. According to experimental results, the molecular weight of canopies should be high enough to maintain the porous materials in the liquid state at room temperature. Characterization results revealed that PL_1_M2070 and PL_1_AC1815 displayed low viscosity and good fluidity. Both low temperature and high pressure positively influenced CO₂ capacity. The cavity occupancy resulted in poorer sorption capacity of PLs with branched canopies in comparison with that with linear canopies. Furthermore, the sorption capacity of PL_1_M2070 was 90.5% of the original CO₂ sorption capacity after 10 sorption/desorption cycles, indicating excellent recyclability.

Hypercrosslinked Ionic Polymers with High Ionic Content for Efficient Conversion of Carbon Dioxide into Cyclic Carbonates

The effective conversion of carbon dioxide (CO2) into cyclic carbonates requires porous materials with high ionic content and large specific surface area. Herein, we developed a new systematic post-synthetic modification strategy for synthesizing imidazolium-based hypercrosslinked ionic polymers (HIPs) with high ionic content (up to 2.1 mmol g−1) and large specific surface area (385 m2 g−1) from porous hypercrosslinked polymers (HCPs) through addition reaction and quaternization. The obtained HIPs were efficient in CO2 capture and conversion. Under the synergistic effect of high ionic content, large specific surface area, and plentiful micro/mesoporosity, the metal-free catalyst [HCP-CH2-Im][Cl]-1 exhibited quantitative selectivities, high catalytic yields, and good substrate compatibility for the conversion of CO2 into cyclic carbonates at atmospheric pressure (0.1 MPa) in a shorter reaction time in the absence of cocatalysts, solvents, and additives. High catalytic yields (styrene oxide, 120 °C, 8 h, 94% yield; 100 °C, 20 h, 93% yield) can be achieved by appropriately extending the reaction times at low temperature, and the reaction times are shorter than other porous materials under the same conditions. This work provides a new strategy for synthesizing an efficient metal-free heterogeneous catalyst with high ionic content and a large specific surface area from HCPs for the conversion of CO2 into cyclic carbonates. It also demonstrates that the ionic content and specific surface area must be coordinated to obtain high catalytic activity for CO2 cycloaddition reaction.

Metal-assisted synthesis of salen-based porous organic polymer for highly efficient fixation of CO2 into cyclic carbonates

A series of metal–salen-based porous organic polymers was synthesized using a simple metal-assisted synthetic method, among which Co-salen-POP exhibited highly efficient performance in the fixation of CO2 into cyclic carbonates.

A lamellar structure zeolite LTA for CO2 capture

Two-dimensional zeolite LTA with a special structure can be used in gas separation.

A Solvent-Polarity-Induced Interface Self-Assembly Strategy towards Mesoporous Triazine-Based Carbon Materials

Triazine-based materials with porous structure have recently received numerous attentions as a fascinating new class because of their superior potential for various applications. However, it is still a formidable challenge to obtain triazine-based materials with precise adjustable meso-scaled pore sizes and controllable pore structures by reported synthesis approaches. Herein, we develop a solvent polarity induced interface self-assembly strategy to construct mesoporous triazine-based carbon materials. In this method, we employ a mixed solvent system within a suitable range of polarity (0.223≤Lippert-Mataga parameter (Δf) ≤0.295) to induce valid self-assembly of skeleton precursor and surfactant. The as-prepared mesoporous triazine-based carbon materials possess uniform tunable pore sizes (8.2-14.0 nm), high surface areas and ultrahigh nitrogen content (up to 18 %). Owing to these intriguing advantages, the fabricated mesoporous triazine-based carbon materials as functionalized porous solid absorbents exhibit predominant CO₂ adsorption performance and exceptional selectivity for the capture of CO₂ over N₂ .

Porous Organic Polymers for Catalytic Conversion of Carbon Dioxide

To overcome the challenges of global warming and environmental pollution, it is necessary to reduce the concentration of carbon dioxide (CO₂ ) in the atmosphere, which is mainly accumulated in the air through the burning of fossil fuels. Therefore, the development of environmentally friendly strategies to capture carbon dioxide and convert it into value-added products offers a promising way forward for reducing carbon dioxide concentration in the atmosphere. In this context, POPs (porous organic polymers) have shown great potential as CO₂ selective adsorbents due to their high specific surface area, chemical stability, nanoscale porosity and structural diversity, as well as POPs based heterogeneous catalysts for CO₂ conversion. This review provides a concise account of preparation methods of various POPs, challenges and current development trends of POPs in photocatalytic CO₂ reduction, electrocatalytic CO₂ reduction and chemical CO₂ conversion.

The room-temperature, ambient-pressure conversion of CO2 into value-added pharmaceutical products quinazoline-2,4(1H,3H)-diones

As global warming due to CO₂ emissions has become a widely recognized concern, CO₂ capture, sequestration, neutralization, and conversion have become possible solutions to address this concern. Among these approaches, the conversion of CO₂ into fuels or value-added products has attracted considerable attention. In this work, we report the high-efficiency conversion of CO₂ to important industrial raw materials for pharmaceutical compounds, quinazoline-2,4(1H,3H)-diones, via reactions with 2-aminobenzonitriles at room temperature and under ambient pressure, with high conversion yields (91.5-99.3%). 1,8-Diazabicyclo-[5.4.0]-undec-7-ene (DBU), 1,1,3,3-tetramethylguanidine (TMG), and cholinium (Ch) ammonium-based ionic liquids (ILs) are employed as catalysts during the process. Cations with a pK_a value near 11.9 and anions with a pK_a value range of 10 to 15 are necessary for the reaction. The experimental results indicate that the ionic liquid pair [HDBU⁺][3-Cl-PhO^-] has high efficiency under very mild conditions, obtaining high product yields of 91.5% at 25 °C and 1 atm and 99.3% at 30 °C and 1 atm. More importantly, the catalysts retain high efficiency and activity after 5 consecutive cycles. To gain insightful understanding of the reaction, density functional theory (DFT) calculations were conducted to study the reaction mechanism. The computational results indicate that the catalytic process contains three stages: cyano activation, intramolecular rearrangement, and intramolecular cyclization. Of these, the rate-determining step is cyano activation, which shows an energy barrier of 24.5 kcal mol^-1. Tuning the types of ions in ILs can effectively reduce this energy barrier and allow high efficiencies.

Different functional groups modified porous organic polymers used for low concentration CO2 fixation

Through a facile post-synthetic method, different kinds of polar group-functionalized ionic liquid porous organic polymers (POP-PA-COOH, POP-PA-OH, and POP-PA-NH₂) were obtained. The materials can be used as efficient heterogeneous catalysts in the cycloaddition reaction of CO₂ with epoxides under mild and co-catalyst-free conditions. It is demonstrated that POP-PA-NH₂ possesses much higher catalytic activity than POP-PA-OH and POP-PA-COOH. Interestingly, this activity difference can further be amplified when the reaction is carried out under low CO₂ concentration, and POP-PA-NH₂ possesses a conversion of 84.7% with a selectivity of 99.0% in 96 h. It is noteworthy to mention that research focusing on the transformation of CO₂ under low concentration using heterogeneous catalysts is rare and still a challenge. The excellent activities of POP-PA-NH₂ under low CO₂ concentration make this material a good candidate for CO₂ elimination under mild conditions.

POSS and imidazolium-constructed ionic porous hypercrosslinked polymers with multiple active sites for synergistic catalytic CO2 transformation

In this work, we reported a facile one-pot approach to construct polyhedral oligomeric silsesquioxane (POSS) and imidazolium-based ionic porous hypercrosslinked polymers (denoted as iPHCPs) with multiple active sites towards efficient catalytic conversion of carbon dioxide (CO₂) to high value-added cyclic carbonates. The targeted iPHCPs were synthesized from a rigid molecular building block octavinylsilsesquioxane (VPOSS) and a newly-designed phenyl-based imidazolium ionic crosslinker through the AlCl₃-catalyzed Friedel-Crafts reaction. The desired multiple active sites come from the mixed anions including free Cl^- and Br^- anions, and in situ formed Lewis acidic metal-halogen complex anions [AlCl₃Br]^- within imidazolium moieties and POSS-derived Si-OH groups during the synthetic process. The typical polymer iPHCP-12 possesses a hierarchical micro-/mesoporous structure with a high surface area up to 537 m² g^-1 and shows a fluffy nano-morphology. By virtue of the co-existence of free nucleophilic Cl^- and Br^- anions, the metal complex anion [AlCl₃Br]^- with both electrophilic and nucleophilic characters and electrophilic hydrogen bond donor (HBD) Si-OH groups, iPHCP-12 is regarded as an efficient recyclable heterogeneous catalyst for synergistic catalytic conversion of CO₂ with various epoxides into cyclic carbonates under mild conditions. The present work provides a succinct one-pot strategy to construct task-specific ionic porous hypercrosslinked polymers from easily available modules for the targeted catalytic applications.

Metalloporphyrin and Ionic Liquid-Functionalized Covalent Organic Frameworks for Catalytic CO2 Cycloaddition via Visible-Light-Induced Photothermal Conversion

We report the construction of a porphyrin and imidazolium-ionic liquid (IL)-decorated and quinoline-linked covalent organic framework (COF, abbreviated as COF-P1-1) via a three-component one-pot Povarov reaction. After post-synthetic metallization of COF-P1-1 with Co(II) ions, the metallized COF-PI-2 is generated. COF-PI-2 is chemically stable and displays highly selective CO₂ adsorption and good visible-light-induced photothermal conversion ability (ΔT = 26 °C). Furthermore, the coexistence of Co(II)-porphyrin and imidazolium-IL within COF-PI-2 has guaranteed its highly efficient activity for CO₂ cycloaddition. Of note, the needed thermal energy for the reactions is derived from the photothermal conversion of the Co(II)-porphyrin COF upon visible-light irradiation. More importantly, the CO₂ cycloaddition herein is a "window ledge" reaction, and it can proceed smoothly upon natural sunlight irradiation. In addition, a scaled-up CO₂ cycloaddition can be readily achieved using a COF-PI-2@chitosan aerogel-based fixed-bed model reactor. Our research provides a new avenue for COF-based greenhouse gas disposal in an eco-friendly and energy- and source-saving way.

Synthesis of Bifunctional Porphyrin Polymers for Catalytic Conversion of Dilute CO2 to Cyclic Carbonates

Development of efficient solid catalysts for catalytic conversion of dilute CO2 is of extreme importance for carbon capture and utilization. We report the synthesis of bifunctional polymers co-incorporated with porphyrin-Zn as Lewis acid sites and Br- as nucleophiles for the cycloaddition of dilute CO2 with epoxides in this work. It was found that the Br-/Zn ratio has a volcano relation with the activity of bifunctional polymers in a cycloaddition reaction, indicating the synergy effect between Lewis acid sites and nucleophiles. The turnover frequency (TOF) of the bifunctional polymer is more than four-fold that of the physical mixture of tetrabutylammonium bromide and porphyrin-Zn-incorporated polymer, implying the enhanced cooperation between Br- and porphyrin-Zn in the polymer network. The bifunctional polymer with optimized Br-/Zn afforded 99% conversion, 99% selectivity, and a TOF as high as 12,000 h-1 for the cycloaddition of CO2 and propylene oxide, which is among the most active solid catalysts ever reported. Furthermore, the bifunctional polymer could efficiently catalyze the cycloaddition of epichlorohydrin with dilute CO2 (7.5% CO2 balanced by N2) even under ambient conditions, demonstrating its potential application in industrial-scale production.

Rational construction of Ni(OH)2 nanoparticles on covalent triazine-based framework for artificial CO2 reduction

Artificial photoreduction of CO₂ to chemical fuel is an intriguing and reliable strategy to tackle the issues of energy crisis and climate change simultaneously. In the present study, we rationally constructed a Ni(OH)₂-modified covalent triazine-based framework (CTF-1) composites to serve as cocatalyst ensemble for superior photoreduction of CO₂. In particular, the optimal Ni(OH)₂-CTF-1 composites (loading ratio at 0.5 wt%) exhibited superior photocatalytic activity, which surpassed the bare CTF-1 by 33 times when irradiated by visible light. The mechanism for the enhancement was systematically investigated based on various instrumental analyses. The origin of the superior activity was attributable to the enhanced CO₂ capture, more robust visible-light response, and improved charge carrier separation/transfer. This study offers an innovative pathway for the fabrication of noble-metal-free cocatalysts on CTF semiconductors and deepens the understanding of photocatalytic CO₂ reduction.

Porous noria polymer: a cage-to-network approach toward a robust catalyst for CO2 fixation and nitroarene reduction

The advantages of the cage-to-network design strategy were demonstrated by knitting a waterwheel-like preporous molecular cage, noria, with a rigid aromatic linker to obtain a highly microporous organic polymer (NPOP, SBET: 748 ± 25 m2 g-1). The NPOP was employed for the catalytic conversion of CO2 to cyclic carbonates under solvent-free reaction conditions. Furthermore, a silver nanoparticle encapsulated NPOP exhibited remarkable catalytic activity for nitroarene reduction with excellent recyclability.

Microwave-Assisted Synthesis of Tris-Anderson Polyoxometalates for Facile CO2 Cycloaddition

Four new tris-Anderson polyoxometalates (POMs), (NH₄)₄[ZnMo₆O₁₈(C₄H₈NO₃)(OH)₃]·4H₂O (1), (NH₄)₄[CuMo₆O₁₈(C₄H₈NO₃)(OH)₃]·4H₂O (2), (TBA)₃(NH₄)[ZnMo₆O₁₇(C₅H₉O₃)₂(OH)]·10H₂O (3) (TBA = n-C₁₆H₃₆N), and (NH₄)₄[CuMo₆O₁₈(C₅H₉O₃)₂]·16H₂O (4), were synthesized by a microwave-assisted method. Single-crystal X-ray diffraction revealed that 1 and 2 contained a tris (trihydroxyl organic compounds) ligand grafted on one side, while two tris ligands were grafted on two sides to form χ/δ and δ/δ isomers in 3 and 4, respectively. ¹H and ¹³C NMR spectra of the χ/δ isomer 3 were obtained for the first time, with six methylenes showing six peaks in the ¹H NMR spectrum and only four peaks in the ¹³C NMR spectrum. Mass spectrometry monitoring revealed that during the microwave-assistant process the tris ligand can graft onto POMs to form 1, while tris directly coordinates with metallic heteroatoms to form isopolymolybdates during the conventional reflux synthesis process. In addition, 1-4 can catalyze CO₂ with epoxides into cyclic carbonates with high selectivity and yields at an atmospheric pressure of CO₂, which is lower than the pressure of CO₂ in other catalysis using POMs as catalysts. Furthermore, 1-4 showed good catalytic stability and cycling properties. Mechanism studies substantiated POMs cocatalyzed with Br^- to improve the catalytic yields.

Efficient Synthesis of Cyclic Carbonates from Unsaturated Acids and Carbon Dioxide and their Application in the Synthesis of Biobased Polyurethanes

Bio-derived furan- and diacid-derived cyclic carbonates have been synthesized in high yields from terminal epoxides and CO₂ . Furthermore, four highly substituted terpene-derived cyclic carbonates were isolated in good yields with excellent diastereoselectivity in some cases. Eleven new cyclic carbonates derived from 10-undecenoic acid under mild reaction conditions were prepared, providing the corresponding carbonate products in excellent yields. The catalyst system also performed the conversion of an epoxidized fatty acid n-pentyl ester into a cyclic carbonate under relatively mild reaction conditions (80 °C, 20 bar, 24 h). This bis(cyclic carbonate) was obtained in high yields and with different cis/trans ratios depending on the co-catalyst used. An allyl alcohol by-product was only observed as a minor product when bis(triphenylphosphine)iminium chloride was used as co-catalyst. Finally, two cyclic carbonates were used as building blocks for the preparation of non-isocyanate poly(hydroxy)urethanes by reaction with 1,4-diaminobutane.

The Ionic Organic Cage: An Effective and Recyclable Testbed for Catalytic CO2 Transformation

Porous organic cages (POC) are a class of relatively new molecular porous materials, whose concept was raised in 2009 by Cooper’s group and has rarely been directly used in the area of organic catalysis. In this contribution, a novel ionic quasi-porous organic cage (denoted as Iq-POC), a quaternary phosphonium salt, was easily synthesized through dynamic covalent chemistry and a subsequent nucleophilic addition reaction. Iq-POC was applied as an effective nucleophilic catalyst for the cycloaddition reaction of CO2 and epoxides. Owing to the combined effect of the relatively large molecular weight (compared with PPh3+I−) and the strong polarity of Iq-POC, the molecular catalyst Iq-POC displayed favorable heterogeneous nature (i.e., insolubility) in this catalytic system. Therefore, the Iq-POC catalyst could be easily separated and recycled by simple centrifugation method, and the catalyst could be reused five times without obvious loss of activity. The molecular weight augmentation route in this study (from PPh3+I− to Iq-POC) provided us a “cage strategy” of designing separable and recyclable molecular catalysts.