Identifying the True Catalyst in the Reduction of 4-Nitrophenol: A Case Study Showing the Effect of Leaching and Oxidative Etching Using Ag Catalysts

Electron transfer in heterojunction catalysts

Heterojunction catalysis, the cornerstone of the modern chemical industry, shows potential to tackle the growing energy and environmental crises. Electron transfer (ET) is ubiquitous in heterojunction catalysts, and it holds great promise for improving the catalytic efficiency by tuning the electronic structures or building internal electric fields at interfaces. This perspective summarizes the recent progress of catalysis involving ET in heterojunction catalysts and pinpoints its crucial role in catalytic mechanisms. We specifically highlight the occurrence, driving forces, and applications of ET in heterojunction catalysis. For corroborating the ET processes, common techniques with measurement principles are introduced. We end with the limitations of the current study on ET, and envision future challenges in this field.

Surfactant- and Ligand-Free Synthesis of Platinum Nanoparticles in Aqueous Solution for Catalytic Applications

The synthesis of surfactant-free and organic ligand-free metallic nanoparticles in solution remains challenging due to the nanoparticles’ tendency to aggregate. Surfactant- and ligand-free nanoparticles are particularly desirable in catalytic applications as surfactants, and ligands can block access to the nanoparticles’ surfaces. In this contribution, platinum nanoparticles are synthesized in aqueous solution without surfactants or bound organic ligands. Pt is reduced by sodium borohydride, and the borohydride has a dual role of reducing agent and weakly interacting stabilizer. The 5.3 nm Pt nanoparticles are characterized using UV-visible spectroscopy and transmission electron microscopy. The Pt nanoparticles are then applied as catalysts in two different reactions: the redox reaction of hexacyanoferrate(III) and thiosulfate ions, and H2O2 decomposition. Catalytic activity is observed for both reactions, and the Pt nanoparticles show up to an order of magnitude greater activity over the most active catalysts reported in the literature for hexacyanoferrate(III)/thiosulfate redox reactions. It is hypothesized that this enhanced catalytic activity is due to the increased electron density that the surrounding borohydride ions give to the Pt nanoparticle surface, as well as the absence of surfactants or organic ligands blocking surface sites.

CeO2/Ni-MOF with Synergistic Function of Enrichment and Activation: Efficient Reduction of 4-Nitrophenol Pollutant to 4-Aminophenol

The conversion of organic pollutants to value-added chemicals has been considered as a sustainable approach to solve environmental problems. However, it is still a challenge to construct a suitable heterogeneous catalyst that can synchronously achieve the enrichment and activation of organic pollutants (such as 4-nitrophenol, 4-NP). Here, an organic-inorganic hybrid catalyst (CeO₂/Ni-MOF) was successfully fabricated for efficiently reducing 4-NP to 4-aminophenol (4-AP) with water as the hydrogen source. Based on the synergistic effect of Ni-MOF (adsorption action) and CeO₂ (active sites), CeO₂/Ni-MOF could achieve a reaction rate of 1.102 μmol min^-1 mg^-1 with an ultrahigh Faraday efficiency (FE) (99.9%) and conversion (97.6%). In addition, the catalytic mechanism of 4-NP reduction over CeO₂/Ni-MOF was elaborated in depth. This work presents a new avenue for the effective reduction of pollutants and provides a new strategy for designing high-performance catalysts for rare-earth metals.

The identification of byproducts from the catalytic reduction reaction of 4-nitrophenol to 4-aminophenol: A systematic spectroscopic study

Acetaminophenol, commonly recognized as paracetamol (considered safer than aspirin) is formed by nitration of phenol (4-nitrophenol (4-NP)) for its conversion to 4-aminophenol (4-AP), followed by the acetylation for the final product. As 4-NP is an intermediate product in acetaminophenol (paracetamol) production from phenol the dynamic analysis of acetylation of amine group is important. This study focuses on the feasibility of spectroscopic studies to monitor the removal of 4-NP using sodium borohydride (NaBH₄) probe reaction in the presence of silver, gold, and bimetallic Ag/Au nanoparticles. UV-visible absorbance and fluorescence spectroscopy measurements reveal the formation of 1,4-benzoquinone (BQ), hydroquinone (HQ), and phenol (Ph) as the final products, in addition to the formation of typically reported 4-AP. The intermediates of NaBH₄ seem to play a significant role in the formation of BQ, which converts to HQ in the basic medium followed by the formation of phenol in an acidic medium. Complete kinetic analysis with respect to spectroscopic studies of the standard compounds is presented. Similar results were obtained with 4-NP spiked river and seawater samples. The present findings may lead to catalytic benchmarking that can differ from most of the current practices and highlight the importance of adopting a holistic approach towards the fundamental understanding of 4-NP catalytic reduction that must take into account the concentration of NaBH₄ and pH interdependencies.

Nickel foam supported porous copper oxide catalysts with noble metal-like activity for aqueous phase reactions

Contiguous metal foams offer a multitude of advantages over conventional powders as supports for nanostructured heterogeneous catalysts; most critically a preformed 3-D porous framework ensuring full directional coverage of supported catalyst, and intrinsic ease of handling and recyclability. Nonetheless, metal foams remain comparatively underused in thermal catalysis compared to more conventional supports such as amorphous carbon, metal oxides, zeolites and more recently MOFs. Herein, we demonstrate a facile preparation of highly-reactive, robust, and easy to handle Ni foam-supported Cu-based metal catalysts. The highly sustainable synthesis requires no specialized equipment, no surfactants or additive redox reagents, uses water as solvent, and CuCl2(H2O)2 as precursor. The resulting material seeds as well-separated micro-crystalline Cu2(OH)3Cl evenly covering the Ni foam. Calcination above 400 °C transforms the Cu2(OH)3Cl to highly porous CuO. All materials display promising activity towards the reduction of 4-nitrophenol and methyl orange. Notably, our leading CuO-based material displays 4-nitrophenol reduction activity comparable with very reactive precious-metal based systems. Recyclability studies highlight the intrinsic ease of handling for the Ni foam support, and our results point to a very robust, highly recyclable catalyst system.

Solvent effects on the kinetics of 4-nitrophenol reduction by NaBH4 in the presence of Ag and Au nanoparticles

The reduction of 4-nitrophenol (4-NiP) to 4-aminophenol (4-AP) with an excess of sodium borohydride is commonly used as a model reaction to assess the catalytic activity of metallic nanoparticles. This reaction is considered both a potentially important step in industrial water treatment and an attractive, commercially relevant synthetic pathway. Surprisingly, an important factor, the role of the reaction medium on the reduction performance, has so far been overlooked. Here, we report a pronounced effect of the solvent on the reaction kinetics in the presence of silver and gold nanoparticles. We demonstrate that the addition of methanol, ethanol, or isopropanol to the reaction mixture leads to a dramatic decrease in the reaction rate. For typical concentrations of reactants, the reduction is completely suppressed in the presence of 50 vol% alcohols. 4-NiP reduction rate in aqueous alcohol mixtures can, however, be improved noticeably by increasing the borohydride concentration or the reaction temperature. The analysis of various factors responsible for solvent effects reveals that the decrease in the reduction rate in the presence of alcohols is related, amongst others, to a substantially higher oxygen solubility in alcohols compared to water. The results of this work show that the effects of solvent properties on reaction kinetics must be considered for unambiguous comparison and optimization of the catalytic performance of metallic nanoparticles in the liquid phase 4-NiP reduction.

The presence of methanol, ethanol, or isopropanol in the reaction mixture substantially affects the kinetics of 4-nitrophenol reduction in aqueous medium.

Surface electronic states mediate concerted electron and proton transfer at metal nanoscale interfaces for catalytic hydride reduction of -NO2 to -NH2

Concerted electron and proton transfer is a key step for the reversible conversion of molecular hydrogen in both heterogeneous nanocatalysis and metalloenzyme catalysis. However, its activation mechanism involving electron and proton transfer kinetics remains elusive. With the most widely used catalytic hydride reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) as a model reaction, we evaluate the catalytic activity of noble metal nanoparticles (NPs) trapped in porous silica in aqueous NaBH4 solution. By virtue of a novel combination of catalyst design, reaction kinetics, isotope labeling, and multiple spectroscopic techniques, the real catalytic site for the conversion of -NO2 to -NH2 is identified to be the water-hydroxyl transition metal complex, which could further react with NaBH4 to form a new triangular configuration metal complex of H3B-water-hydroxyl with dynamic features. It yields an ensemble of surface electronic states (SESs) though space overlapping of p orbitals of one B and several O atoms (including the O atoms of 4-NP), which could act as an alternative channel for concerted electron and proton transfer. This work highlights the critical role of the conceptual SESs model in heterogeneous catalysis to tune the chemical reactivity and also sheds light on the intricate working of the [FeFe]-hydrogenases.

3D Porous Polymeric-Foam-Supported Pd Nanocrystal as a Highly Efficient and Recyclable Catalyst for Organic Transformations

The efficient recovery of noble metal nanocrystals used in heterogeneous organic transformations has remained a significant challenge, hindering their use in industry. Herein, highly catalytic Pd nanoparticles (NPs) were first prepared having a yield of >98% by a novel hydrothermal method using PVP as the reducing cum stabilizing agent that exhibited excellent turnover frequencies of ∼38,000 h^-1 for Suzuki-Miyaura cross-coupling and ∼1200 h^-1 for catalytic reduction of nitroarene compounds in a benign aqueous reaction medium. The Pd NPs were more efficient for cross-coupling of aryl compounds with electron-donating substituents than with electron-donating ones. Further, to improve their recyclability, a strategy was developed to embed these Pd NPs on mechanically robust polyurethane foam (PUF) for the first time and a "dip-catalyst" (Pd-PUF) containing 3D interconnected 100-500 μm pores was constructed. The PUF was chosen as the support with an expectation to reduce the fabrication cost of the "dip-catalyst" as the production of PUF is already commercialized. Pd-PUF could be easily separated from the reaction aliquot and reused without any loss of activity because the leaching of Pd NPs was found to be negligible in the various reaction mixtures. We show that the Pd-PUF could be reused for over 50 catalytic cycles maintaining a similar activity. We further demonstrate a scale-up reaction with a single-reaction 1.5 g yield for the Suzuki-Miyaura cross-coupling reaction.

Fly ash supported Pd-Ag bimetallic nanoparticles exhibiting a synergistic catalytic effect for the reduction of nitrophenol

Coal fly ash (FA) supported Pd-Ag bimetallic nanoparticles (FA-Pd-Ag) were prepared by reducing Pd(II) and Ag(I) salts together onto the dispersed solid support in aqueous medium. Electron microscope analysis (FE-SEM, HRTEM) in combination with elemental mapping (EDS) suggests that the nanoparticles are well dispersed on fly ash with an average diameter of 6-8 nm. The powder XRD analysis indicates that alloying of the interface occurs between Pd and Ag nanoparticles in FA-Pd-Ag, while XPS reveals that charge transfer takes place between the Pd and Ag moieties that come into contact with each other. The FA-Pd-Ag in aqueous NaBH4 solution exhibits an efficient catalytic reduction of 4-nitrophenol into 4-aminophenol and follows pseudo-first-order reaction kinetics (kPd-Ag = 0.7176 min-1). The higher rate constant for FA-Pd-Ag compared to that for their monometallic analogues (FA-Pd (kPd = 0.5449 min-1)) and (FA-Ag (kAg = 0.5572 min-1)) as well as their physical mixture ((FA-Pd + FA-Ag) (kPd+Ag = 0.4075 min-1)) suggests the synergistic catalytic effect of the bimetallic system. Moreover, the present bimetallic nanocatalyst exhibits the highest normalized rate constant (KPd-Ag ≈ 51 100 min-1 mmol-1) compared to the reported bimetallic Pd-Ag nanocatalysts.

Orthogonal deposition of Au on different facets of Ag cuboctahedra for the fabrication of nanoboxes with complementary surfaces

We report the fabrication of Ag-Au cuboctahedral nanoboxes enclosed by {100} and {111} facets, respectively, through the orthogonal deposition of Au on two different facets of Ag cuboctahedra. Specifically, we titrate aqueous HAuCl₄ into an aqueous mixture containing Ag cuboctahedra, ascorbic acid, and NaOH (under basic conditions), in the presence of poly(vinylpyrrolidone) (PVP) and cetyltrimethylammonium chloride (CTAC), respectively. In the case of PVP, the oxidation of Ag was initiated from the {111} facets of the cuboctahedra through the galvanic replacement reaction between Au(iii) and Ag, accompanied by the deposition of Au onto the {100} facets. Because the dissolved Ag(i) ions could react with NaOH to form Ag₂O on the {111} facets and thus terminate the galvanic reaction, the Au(iii) ions would be further reduced by the ascorbate monoanion (HAsc^-) to generate Au atoms for their continuing deposition on the {100} facets, converting Ag cuboctahedra to Ag@Au_{100} cuboctahedra. Upon the etching of Ag from the core, we obtained Ag-Au cuboctahedral nanoboxes enclosed by {100} facets. In contrast, when CTAC was present, the oxidation of Ag through a galvanic reaction could continuously proceed on {100} facets as the dissolved Ag(i) ions would react with the excessive amount of Cl^- ions derived from CTAC to produce soluble AgCl₂^- ions rather than insoluble Ag₂O. As a result, the dissolved Ag(i) and Au(iii) ions would be co-reduced by HAsc^- for the generation of Ag and Au atoms, followed by their co-deposition onto {111} facets for the generation of Ag@Au_{111} concave cuboctahedra. After the removal of Ag from the core by etching, we obtained Ag-Au_{111} cuboctahedral nanoboxes enclosed by {111} facets. Both samples of cuboctahedral nanoboxes exhibited strong optical absorption in the infrared region. Interestingly, the cuboctahedral nanoboxes enclosed by {111} facets showed significantly enhanced catalytic activity toward the reduction of 4-nitrophenol by NaBH₄ relative to their counterparts encased by {100} facets.

Role of dissolved oxygen in nitroarene reduction by a heterogeneous silver textile catalyst in water

The effects of dissolved oxygen concentration on the rate constant of the 4-nitrophenol reduction reaction with a silver-coated textile as a ‘dip-catalyst’ were studied.

A Combined Mechanochemical and Calcination Route to Mixed Cobalt Oxides for the Selective Catalytic Reduction of Nitrophenols

Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.

Rational Design of Multisite Trielement Ru-Ni-Fe Alloy Nanocatalysts with Efficient and Durable Catalytic Hydrogenation Performances

The co-decomposition of non-noble metals into Ru nanoparticles (NPs) would provide multiple active centers as well as synergistically alter the reaction pathway, enhancing the catalytic hydrogenation performance. Herein, a facile route for synthesizing trielement Ru-Ni-Fe alloy NPs was proposed. The catalytic hydrogenation performance of NPs was measured using p-nitrophenol as a model. The synergistic effect of these three elements (Ru, Ni, and Fe) and synergistic catalysis of multiple crystal faces greatly improved the catalytic hydrogenation performance of Ru₄₄Ni₂₈Fe₂₈ alloy NPs. Ru with more vacant orbitals showed a strong coordination with BH₄^- for the generation of active H species. Ni played a major role in transporting electrons and active H species, increasing the accessibility of catalytically active sites. Fe could cooperate with BH₄^- to produce active H species and promote electrons transfer. Ru₄₄Ni₂₈Fe₂₈ alloy NPs could be reused and applied for the fabrication of films at the oil-water (ethyl acetate-water) interface. The densely packed Ru₄₄Ni₂₈Fe₂₈ NP films were good Raman substrates for monitoring the complete conversion of 4-nitrothiophenol into 4-aminothiophenol. The rational design of Ru₄₄Ni₂₈Fe₂₈ will broaden the application range of Ru-based catalysts and provide new insights into the rational design of other multisite alloy catalysts.

Aerobic Methanol Oxidation over Unsupported Nanoporous Gold: The Influence of an Added Base

We studied the aerobic oxidation of methanol over nanoporous gold catalysts under neutral and alkaline conditions. We find that under neutral conditions the catalyst has an activation period of about 10 h while upon addition of a base the catalyst becomes active right away. After this activation period, however, the activity of the catalyst is in both cases similar. Moreover, the selectivity was not affected by the base. We tested different bases and found the largest effect when adding OH−. The cation, however, does not play a role. We conclude that it is OH−, which is impacting the reaction and propose a mechanism for the suppression of the activation period. While the catalytic cycle, i.e., the reaction of methanol on the catalyst surface seems unaffected, the transient adsorption of OH− onto the surface can facilitate the activation of molecular oxygen by donating electrons to the surface. Due to the intermediate formation of oxidic Ag species, an effective segregation of surface-near Ag can be induced, which increases the abundance of Ag being essential for the activation of oxygen at the surface. In this way, a more efficient pathway for the generation of active oxygen is opened, allowing the reaction to set in faster.

Au–Cu–M (M = Pt, Pd, Ag) nanorods with enhanced catalytic efficiency by galvanic replacement reaction

This work reports a general wet-chemistry method to produce Au–Cu–X (X = Pt, Pd, and Ag) trimetallic nanorods using galvanic replacement reaction with Au–Cu nanorods as the templates.

Light-Mediated Growth of Noble Metal Nanostructures (Au, Ag, Cu, Pt, Pd, Ru, Ir, Rh) From Micro- and Nanoscale ZnO Tetrapodal Backbones

Micro- and nanoscale ZnO tetrapods provide an attractive support for metallic nanostructures since they can be inexpensively produced using the flame transport method and nanoparticle synthesis schemes can take advantage of a coupled response facilitated by the formation of a semiconductor-metal interface. Here, we present a light-mediated solution-based growth mode capable of decorating the surface of ZnO tetrapods with nanostructures of gold, silver, copper, platinum, palladium, ruthenium, iridium, and rhodium. It involves two coupled reactions that are driven by the optical excitation of electron-hole pairs in the ZnO semiconductor by ultraviolet photons where the excited electrons are used to reduce aqueous metal ions onto the ZnO tetrapod as excited holes are scavenged from the surface. For the most part, the growth mode gives rise to nanoparticles with a roundish morphology that are uniformly distributed on the tetrapod surface. Larger structures with irregular shapes are, however, obtained for syntheses utilizing aqueous metal nitrates as opposed to chlorides, a result that suggests that the anion plays a role in shape determination. It is also demonstrated that changes to the molarity of the metal ion can influence the nanostructure nucleation rate. The catalytic activity of tetrapods decorated with each of the eight metals is assessed using the reduction of 4-nitrophenol by borohydride as a model reaction where it is shown that those decorated with Pd, Ag, and Rh are the most active.