Mechanistic Studies of Fatty Acid Activation by CYP152 Peroxygenases Reveal Unexpected Desaturase Activity

Machine learning-aided engineering of a cytochrome P450 for optimal bioconversion of lignin fragments

Using machine learning, molecular dynamics simulations, and density functional theory calculations we gain insight into the selectivity patterns of substrate activation by the cytochromes P450. In nature, the reactions catalyzed by the P450s lead to the biodegradation of xenobiotics, but recent work has shown that fungi utilize P450s for the activation of lignin fragments, such as monomer and dimer units. These fragments often are the building blocks of valuable materials, including drug molecules and fragrances, hence a highly selective biocatalyst that can produce these compounds in good yield with high selectivity would be an important step in biotechnology. In this work a detailed computational study is reported on two reaction channels of two P450 isozymes, namely the O-deethylation of guaethol by CYP255A and the O-demethylation versus aromatic hydroxylation of p-anisic acid by CYP199A4. The studies show that the second-coordination sphere plays a major role in substrate binding and positioning, heme access, and in the selectivity patterns. Moreover, the local environment affects the kinetics of the reaction through lowering or raising barrier heights. Furthermore, we predict a site-selective mutation for highly specific reaction channels for CYP199A4.

Computational study on the endocrine-disrupting metabolic activation of Benzophenone-3 catalyzed by cytochrome P450 1A1: A QM/MM approach

Predicting the metabolic activation mechanism and potential hazardous metabolites of environmental endocrine-disruptors is a challenging and significant task in risk assessment. Here the metabolic activation mechanism of benzophenone-3 catalyzed by P450 1A1 was investigated by using Molecular Dynamics, Quantum Mechanics/Molecular Mechanics and Density Functional Theory approaches. Two elementary reactions involved in the metabolic activation of BP-3 with P450 1A1: electrophilic addition and hydrogen abstraction reactions were both discussed. Further conversion reactions of epoxidation products, ketone products and the formaldehyde formation reaction were investigated in the non-enzymatic environment based on previous experimental reports. Binding affinities analysis of benzophenone-3 and its metabolites to sex hormone binding globulin indirectly demonstrates that they all exhibit endocrine-disrupting property. Toxic analysis shows that the eco-toxicity and bioaccumulation values of the benzophenone-3 metabolites are much lower than those of benzophenone-3. However, the metabolites are found to have skin-sensitization effects. The present study provides a deep insight into the biotransformation process of benzophenone-3 catalyzed by P450 1A1 and alerts us to pay attention to the adverse effects of benzophenone-3 and its metabolites in human livers.

Functional Model of Compound II of Cytochrome P450: Spectroscopic Characterization and Reactivity Studies of a FeIV-OH Complex

Herein, we show that the reaction of a mononuclear FeIII(OH) complex (1) with N-tosyliminobenzyliodinane (PhINTs) resulted in the formation of a FeIV(OH) species (3). The obtained complex 3 was characterized by an array of spectroscopic techniques and represented a rare example of a synthetic FeIV(OH) complex. The reaction of 1 with the one-electron oxidizing agent was reported to form a ligand-oxidized FeIII(OH) complex (2). 3 revealed a one-electron reduction potential of -0.22 V vs Fc+/Fc at -15 °C, which was 150 mV anodically shifted than 2 (Ered = -0.37 V vs Fc+/Fc at -15 °C), inferring 3 to be more oxidizing than 2. 3 reacted spontaneously with (4-OMe-C6H4)3C• to form (4-OMe-C6H4)3C(OH) through rebound of the OH group and displayed significantly faster reactivity than 2. Further, activation of the hydrocarbon C-H and the phenolic O-H bond by 2 and 3 was compared and showed that 3 is a stronger oxidant than 2. A detailed kinetic study established the occurrence of a concerted proton-electron transfer/hydrogen atom transfer reaction of 3. Studying one-electron reduction of 2 and 3 using decamethylferrocene (Fc*) revealed a higher ket of 3 than 2. The study established that the primary coordination sphere around Fe and the redox state of the metal center is very crucial in controlling the reactivity of high-valent Fe-OH complexes. Further, a FeIII(OMe) complex (4) was synthesized and thoroughly characterized, including X-ray structure determination. The reaction of 4 with PhINTs resulted in the formation of a FeIV(OMe) species (5), revealing the presence of two FeIV species with isomer shifts of -0.11 mm/s and = 0.17 mm/s in the Mössbauer spectrum and showed FeIV/FeIII potential at -0.36 V vs Fc+/Fc couple in acetonitrile at -15 °C. The reactivity studies of 5 were investigated and compared with the FeIV(OH) complex (3).

CO2 Reduction by an Iron(I) Porphyrinate System: Effect of Hydrogen Bonding on the Second Coordination Sphere

Transforming CO2 into valuable materials is an important reaction in catalysis, especially because CO2 concentrations in the atmosphere have been growing steadily due to extensive fossil fuel usage. From an environmental perspective, reduction of CO2 to valuable materials should be catalyzed by an environmentally benign catalyst and avoid the use of heavy transition-metal ions. In this work, we present a computational study into a novel iron(I) porphyrin catalyst for CO2 reduction, namely, with a tetraphenylporphyrin ligand and analogues. In particular, we investigated iron(I) tetraphenylporphyrin with one of the meso-phenyl groups substituted with o-urea, p-urea, or o-2-amide groups. These substituents can provide hydrogen-bonding interactions in the second coordination sphere with bound ligands and assist with proton relay. Furthermore, our studies investigated bicarbonate and phenol as stabilizers and proton donors in the reaction mechanism. Potential energy landscapes for double protonation of iron(I) porphyrinate with bound CO2 are reported. The work shows that the bicarbonate bridges the urea/amide groups to the CO2 and iron center and provides a tight bonding pattern with strong hydrogen-bonding interactions that facilitates easy proton delivery and reduction of CO2. Specifically, bicarbonate provides a low-energy proton shuttle mechanism to form CO and water efficiently. Furthermore, the o-urea group locks bicarbonate and CO2 in a tight orientation and helps with ideal proton transfer, while there is more mobility and lesser stability with an o-amide group in that position instead. Our calculations show that the o-urea group leads to reduction in proton-transfer barriers, in line with experimental observation. We then applied electric-field-effect calculations to estimate the environmental effects on the two proton-transfer steps in the reaction. These calculations describe the perturbations that enhance the driving forces for the proton-transfer steps and have been used to make predictions about how the catalysts can be further engineered for more enhanced CO2 reduction processes.

Microbial P450 repertoire (P450ome) and its application feasibility in pharmaceutical industry, chemical industry, and environmental protection

Cytochrome P450s (CYPs) are heme-thiolated enzymes that catalyze the oxidation of C-H bonds in a regio- and stereo-selective manner. CYPs are widely present in the biological world. With the completion of more biological genome sequencing, the number and types of P450 enzymes have increased rapidly. P450 in microorganisms is easy to clone and express, rich in catalytic types, and strong in substrate adaptability, which has good application potential. Although the number of P450 enzymes found in microorganisms is huge, the function of most of the microorganism P450s has not been studied, and it contains a large number of excellent biocatalysts to be developed. This review is based on the P450 groups in microorganisms. First, it reviews the distribution of P450 groups in different microbial species, and then studies the application of microbial P450 enzymes in the pharmaceutical industry, chemical industry and environmental pollutant treatment in recent years. And focused on the application fields of P450 enzymes of different families to guide the selection of suitable P450s from the huge P450 library. In view of the current shortcomings of microbial P450 in the application process, the final solution is the most likely to assist the application of P450 enzymes in large-scale, that is, whole cell transformation combined with engineering, fusion P450 combined with immobilization technology.

Enzymatic polyethylene biorecycling: Confronting challenges and shaping the future

Polyethylene (PE) is a widely used plastic known for its resistance to biodegradation, posing a significant environmental challenge. Recent advances have shed light on microorganisms and insects capable of breaking down PE and identified potential PE-degrading enzymes (PEases), hinting at the possibility of PE biorecycling. Research on enzymatic PE degradation is still in its early stages, especially compared to the progress made with polyethylene terephthalate (PET). While PET hydrolases have been extensively studied and engineered for improved performance, even the products of PEases remain mostly undefined. This Perspective analyzes the current state of enzymatic PE degradation research, highlighting obstacles in the search for bona fide PEases and suggesting areas for future exploration. A critical challenge impeding progress in this field stems from the inert nature of the C-C and C-H bonds of PE. Furthermore, breaking down PE into small molecules using only one monofunctional enzyme is theoretically impossible. Overcoming these obstacles requires identifying enzymatic pathways, which can be facilitated using emerging technologies like omics, structure-based design, and computer-assisted engineering of enzymes. Understanding the mechanisms underlying PE enzymatic biodegradation is crucial for research progress and for identifying potential solutions to the global plastic pollution crisis.

P450 fatty acid decarboxylase

P450 fatty acid decarboxylases are able to utilize hydrogen peroxide as the sole cofactor to decarboxylate free fatty acids to produce α-olefins with abundant applications as drop-in biofuels and important chemical precursors. In this chapter, we review diverse approaches for discovery, characterization, engineering, and applications of P450 fatty acid decarboxylases. Information gained from structural data has been advancing our understandings of the unique mechanisms underlying alkene production, and providing important insights for exploring new activities. To build an efficient olefin-producing system, various engineering strategies have been proposed and applied to this unusual P450 catalytic system. Furthermore, we highlight a select number of applied examples of P450 fatty acid decarboxylases in enzyme cascades and metabolic engineering.

Melatonin Activation by Human Cytochrome P450 Enzymes: A Comparison between Different Isozymes

Cytochrome P450 enzymes in the human body play a pivotal role in both the biosynthesis and the degradation of the hormone melatonin. Melatonin plays a key role in circadian rhythms in the body, but its concentration is also linked to mood fluctuations as well as emotional well-being. In the present study, we present a computational analysis of the binding and activation of melatonin by various P450 isozymes that are known to yield different products and product distributions. In particular, the P450 isozymes 1A1, 1A2, and 1B1 generally react with melatonin to provide dominant aromatic hydroxylation at the C6-position, whereas the P450 2C19 isozyme mostly provides O-demethylation products. To gain insight into the origin of these product distributions of the P450 isozymes, we performed a comprehensive computational study of P450 2C19 isozymes and compared our work with previous studies on alternative isozymes. The work covers molecular mechanics, molecular dynamics and quantum mechanics approaches. Our work highlights major differences in the size and shape of the substrate binding pocket amongst the different P450 isozymes. Consequently, substrate binding and positioning in the active site varies substantially within the P450 isozymes. Thus, in P450 2C19, the substrate is oriented with its methoxy group pointing towards the heme, and therefore reacts favorably through hydrogen atom abstraction, leading to the production of O-demethylation products. On the other hand, the substrate-binding pockets in P450 1A1, 1A2, and 1B1 are tighter, direct the methoxy group away from the heme, and consequently activate an alternative site and lead to aromatic hydroxylation instead.

Electrochemical transformations catalyzed by cytochrome P450s and peroxidases

Cytochrome P450s (Cyt P450s) and peroxidases are enzymes featuring iron heme cofactors that have wide applicability as biocatalysts in chemical syntheses. Cyt P450s are a family of monooxygenases that oxidize fatty acids, steroids, and xenobiotics, synthesize hormones, and convert drugs and other chemicals to metabolites. Peroxidases are involved in breaking down hydrogen peroxide and can oxidize organic compounds during this process. Both heme-containing enzymes utilize active Fe^IVO intermediates to oxidize reactants. By incorporating these enzymes in stable thin films on electrodes, Cyt P450s and peroxidases can accept electrons from an electrode, albeit by different mechanisms, and catalyze organic transformations in a feasible and cost-effective way. This is an advantageous approach, often called bioelectrocatalysis, compared to their biological pathways in solution that require expensive biochemical reductants such as NADPH or additional enzymes to recycle NADPH for Cyt P450s. Bioelectrocatalysis also serves as an ex situ platform to investigate metabolism of drugs and bio-relevant chemicals. In this paper we review biocatalytic electrochemical reactions using Cyt P450s including C-H activation, S-oxidation, epoxidation, N-hydroxylation, and oxidative N-, and O-dealkylation; as well as reactions catalyzed by peroxidases including synthetically important oxidations of organic compounds. Design aspects of these bioelectrocatalytic reactions are presented and discussed, including enzyme film formation on electrodes, temperature, pH, solvents, and activation of the enzymes. Finally, we discuss challenges and future perspective of these two important bioelectrocatalytic systems.

Photoenzymatic Decarboxylation to Produce Hydrocarbon Fuels: A Critical Review

Photoenzymatic decarboxylation shows great promise as a pathway for the generation of hydrocarbon fuels. CvFAP, which is derived from Chlorella variabilis NC64A, is a photodecarboxylase capable of converting fatty acids into hydrocarbons. CvFAP is an example of coupling biocatalysis and photocatalysis to produce alkanes. The catalytic process is mild, and it does not yield toxic substances or excess by-products. However, the activity of CvFAP can be readily inhibited by several factors, and further enhancement is required to improve the enzyme yield and stability. In this article, we will examine the latest advancements in CvFAP research, with a particular focus on the enzyme's structural and catalytic mechanism, summarized some limitations in the application of CvFAP, and laboratory-level methods for enhancing enzyme activity and stability. This review can serve as a reference for future large-scale industrial production of hydrocarbon fuels.

Dimer-assisted mechanism of (un)saturated fatty acid decarboxylation for alkene production

The enzymatic decarboxylation of fatty acids (FAs) represents an advance toward the development of biological routes to produce drop-in hydrocarbons. The current mechanism for the P450-catalyzed decarboxylation has been largely established from the bacterial cytochrome P450 OleTJE. Herein, we describe OleTPRN, a poly-unsaturated alkene-producing decarboxylase that outrivals the functional properties of the model enzyme and exploits a distinct molecular mechanism for substrate binding and chemoselectivity. In addition to the high conversion rates into alkenes from a broad range of saturated FAs without dependence on high salt concentrations, OleTPRN can also efficiently produce alkenes from unsaturated (oleic and linoleic) acids, the most abundant FAs found in nature. OleTPRN performs carbon-carbon cleavage by a catalytic itinerary that involves hydrogen-atom transfer by the heme-ferryl intermediate Compound I and features a hydrophobic cradle at the distal region of the substrate-binding pocket, not found in OleTJE, which is proposed to play a role in the productive binding of long-chain FAs and favors the rapid release of products from the metabolism of short-chain FAs. Moreover, it is shown that the dimeric configuration of OleTPRN is involved in the stabilization of the A-A' helical motif, a second-coordination sphere of the substrate, which contributes to the proper accommodation of the aliphatic tail in the distal and medial active-site pocket. These findings provide an alternative molecular mechanism for alkene production by P450 peroxygenases, creating new opportunities for biological production of renewable hydrocarbons.

Melatonin Activation by Cytochrome P450 Isozymes: How Does CYP1A2 Compare to CYP1A1?

Cytochrome P450 enzymes are versatile enzymes found in most biosystems that catalyze mono-oxygenation reactions as a means of biosynthesis and biodegradation steps. In the liver, they metabolize xenobiotics, but there are a range of isozymes with differences in three-dimensional structure and protein chain. Consequently, the various P450 isozymes react with substrates differently and give varying product distributions. To understand how melatonin is activated by the P450s in the liver, we did a thorough molecular dynamics and quantum mechanics study on cytochrome P450 1A2 activation of melatonin forming 6-hydroxymelatonin and N-acetylserotonin products through aromatic hydroxylation and O-demethylation pathways, respectively. We started from crystal structure coordinates and docked substrate into the model, and obtained ten strong binding conformations with the substrate in the active site. Subsequently, for each of the ten substrate orientations, long (up to 1 μs) molecular dynamics simulations were run. We then analyzed the orientations of the substrate with respect to the heme for all snapshots. Interestingly, the shortest distance does not correspond to the group that is expected to be activated. However, the substrate positioning gives insight into the protein residues it interacts with. Thereafter, quantum chemical cluster models were created and the substrate hydroxylation pathways calculated with density functional theory. These relative barrier heights confirm the experimental product distributions and highlight why certain products are obtained. We make a detailed comparison with previous results on CYP1A1 and identify their reactivity differences with melatonin.

Biotransformation of Bisphenol by Human Cytochrome P450 2C9 Enzymes: A Density Functional Theory Study

Bisphenol A (BPA, 2,2-bis-(4-hydroxyphenyl)propane) is used as a precursor in the synthesis of polycarbonate and epoxy plastics; however, its availability in the environment is causing toxicity as an endocrine-disrupting chemical. Metabolism of BPA and their analogues (substitutes) is generally performed by liver cytochrome P450 enzymes and often leads to a mixture of products, and some of those are toxic. To understand the product distributions of P450 activation of BPA, we have performed a computational study into the mechanisms and reactivities using large model structures of a human P450 isozyme (P450 2C9) with BPA bound. Density functional theory (DFT) calculations on mechanisms of BPA activation by a P450 compound I model were investigated, leading to a number of possible products. The substrate-binding pocket is tight, and as a consequence, aliphatic hydroxylation is not feasible as the methyl substituents of BPA cannot reach compound I well due to constraints of the substrate-binding pocket. Instead, we find low-energy pathways that are initiated with phenol hydrogen atom abstraction followed by OH rebound to the phenolic ortho- or para-position. The barriers of para-rebound are well lower in energy than those for ortho-rebound, and consequently, our P450 2C9 model predicts dominant hydroxycumyl alcohol products. The reactions proceed through two-state reactivity on competing doublet and quartet spin state surfaces. The calculations show fast and efficient substrate activation on a doublet spin state surface with a rate-determining electrophilic addition step, while the quartet spin state surface has multiple high-energy barriers that can also lead to various side products including C⁴-aromatic hydroxylation. This work shows that product formation is more feasible on the low spin state, while the physicochemical properties of the substrate govern barrier heights of the rate-determining step of the reaction. Finally, the importance of the second-coordination sphere is highlighted that determines the product distributions and guides the bifurcation pathways.

Design of a H2 O2 -generating P450SPα fusion protein for high yield fatty acid conversion

Sphingomonas paucimobilis' P450SPα (CYP152B1) is a good candidate as industrial biocatalyst. This enzyme is able to use hydrogen peroxide as unique cofactor to catalyze the fatty acids conversion to α-hydroxy fatty acids, thus avoiding the use of expensive electron-donor(s) and redox partner(s). Nevertheless, the toxicity of exogenous H2 O2 toward proteins and cells often results in the failure of the reaction scale-up when it is directly added as co-substrate. In order to bypass this problem, we designed a H2 O2 self-producing enzyme by fusing the P450SPα to the monomeric sarcosine oxidase (MSOX), as H2 O2 donor system, in a unique polypeptide chain, obtaining the P450SPα -polyG-MSOX fusion protein. The purified P450SPα -polyG-MSOX protein displayed high purity (A417 /A280  = 0.6) and H2 O2 -tolerance (kdecay  = 0.0021 ± 0.000055 min-1 ; ΔA417  = 0.018 ± 0.001) as well as good thermal stability (Tm : 59.3 ± 0.3°C and 63.2 ± 0.02°C for P450SPα and MSOX domains, respectively). The data show how the catalytic interplay between the two domains can be finely regulated by using 500 mM sarcosine as sacrificial substrate to generate H2 O2 . Indeed, the fusion protein resulted in a high conversion yield toward fat waste biomass-representative fatty acids, that is, lauric acid (TON = 6,800 compared to the isolated P450SPα TON = 2,307); myristic acid (TON = 6,750); and palmitic acid (TON = 1,962).

Mechanism of Melatonin Metabolism by CYP1A1: What Determines the Bifurcation Pathways of Hydroxylation versus Deformylation?

Melatonin, a widely applied cosmetic active ingredient, has a variety of uses as a skin protector through antioxidant and anti-inflammatory functions as well as giving the body UV-induced defenses and immune system support. In the body, melatonin is synthesized from a tryptophan amino acid in a cascade of reactions, but as melatonin is toxic at high concentrations, it is metabolized in the human skin by the cytochrome P450 enzymes. The P450s are diverse heme-based mono-oxygenases that catalyze oxygen atom-transfer processes that trigger metabolism and detoxification reactions in the body. In the catalytic cycle of the P450s, a short-lived high-valent iron(IV)-oxo heme cation radical is formed that has been proposed to be the active oxidant. How and why it activates melatonin in the human body and what the origin of the product distributions is, are unknown. This encouraged us to do a detailed computational study on a typical human P450 isozyme, namely CYP1A1. We initially did a series of molecular dynamics simulations with substrate docked into several orientations. These simulations reveal a number of stable substrate-bound positions in the active site, which may lead to differences in substrate activation channels. Using tunneling analysis on the full protein structures, we show that two of the four binding conformations lead to open substrate-binding pockets. As a result, in these open pockets, the substrate is not tightly bound and can escape back into the solution. In the closed conformations, in contrast, the substrate is mainly oriented with the methoxy group pointing toward the heme, although under a different angle. We then created large quantum cluster models of the enzyme and focused on the chemical reaction mechanisms for melatonin activation, leading to competitive O-demethylation and C⁶-aromatic hydroxylation pathways. The calculations show that active site positioning determines the product distributions, but the bond that is activated is not necessarily closest to the heme in the enzyme-substrate complex. As such, the docking and molecular dynamics positioning of the substrate versus oxidant can give misleading predictions on product distributions. In particular, in quantum mechanics cluster model I, we observe that through a tight hydrogen bonding network, a preferential 6-hydroxylation of melatonin is obtained. However, O-demethylation becomes possible in alternative substrate-binding orientations that have the C⁶-aromatic ring position shielded. Finally, we investigated enzymatic and non-enzymatic O-demethylation processes and show that the hydrogen bonding network in the substrate-binding pocket can assist and perform this step prior to product release from the enzyme.

Co-Crystal Structure-Guided Optimization of Dual-Functional Small Molecules for Improving the Peroxygenase Activity of Cytochrome P450BM3

We recently developed an artificial P450–H₂O₂ system assisted by dual-functional small molecules (DFSMs) to modify the P450BM3 monooxygenase into its peroxygenase mode, which could be widely used for the oxidation of non-native substrates. Aiming to further improve the DFSM-facilitated P450–H₂O₂ system, a series of novel DFSMs having various unnatural amino acid groups was designed and synthesized, based on the co-crystal structure of P450BM3 and a typical DFSM, N-(ω-imidazolyl)-hexanoyl-L-phenylalanine, in this study. The size and hydrophobicity of the amino acid residue in the DFSM drastically affected the catalytic activity (up to 5-fold), stereoselectivity, and regioselectivity of the epoxidation and hydroxylation reactions. Docking simulations illustrated that the differential catalytic ability among the DFSMs is closely related to the binding affinity and the distance between the catalytic group and heme iron. This study not only enriches the DFSM toolbox to provide more options for utilizing the peroxide-shunt pathway of cytochrome P450BM3, but also sheds light on the great potential of the DFSM-driven P450 peroxygenase system in catalytic applications based on DFSM tunability.

Mechanistic Studies of a Skatole-Forming Glycyl Radical Enzyme Suggest Reaction Initiation via Hydrogen Atom Transfer

Gut microbial decarboxylation of amino acid-derived arylacetates is a chemically challenging enzymatic transformation which generates small molecules that impact host physiology. The glycyl radical enzyme (GRE) indoleacetate decarboxylase from Olsenella uli (Ou IAD) performs the non-oxidative radical decarboxylation of indole-3-acetate (I3A) to yield skatole, a disease-associated metabolite produced in the guts of swine and ruminants. Despite the importance of IAD, our understanding of its mechanism is limited. Here, we characterize the mechanism of Ou IAD, evaluating previously proposed hypotheses of: (1) a Kolbe-type decarboxylation reaction involving an initial 1-e^– oxidation of the carboxylate of I3A or (2) a hydrogen atom abstraction from the α-carbon of I3A to generate an initial carbon-centered radical. Site-directed mutagenesis, kinetic isotope effect experiments, analysis of reactions performed in D₂O, and computational modeling are consistent with a mechanism involving initial hydrogen atom transfer. This finding expands the types of radical mechanisms employed by GRE decarboxylases and non-oxidative decarboxylases, more broadly. Elucidating the mechanism of IAD decarboxylation enhances our understanding of radical enzymes and may inform downstream efforts to modulate this disease-associated metabolism.

What Drives Radical Halogenation versus Hydroxylation in Mononuclear Nonheme Iron Complexes? A Combined Experimental and Computational Study

Nonheme iron halogenases are unique enzymes in nature that selectively activate an aliphatic C–H bond of a substrate to convert it into C–X (X = Cl/Br, but not F/I). It is proposed that they generate an Fe^III(OH)(X) intermediate in their catalytic cycle. The analogous Fe^III(OH) intermediate in nonheme iron hydroxylases transfers OH^• to give alcohol product, whereas the halogenases transfer X^• to the carbon radical substrate. There remains significant debate regarding what factors control their remarkable selectivity of the halogenases. The reactivity of the complexes Fe^III(BNPA^Ph2O)(OH)(X) (X = Cl, Br) with a secondary carbon radical (R^•) is described. It is found that X^• transfer occurs with a secondary carbon radical, as opposed to OH^• transfer with tertiary radicals. Comprehensive computational studies involving density functional theory were carried out to examine the possible origins of this selectivity. The calculations reproduce the experimental findings, which indicate that halogen transfer is not observed for the tertiary radicals because of a nonproductive equilibrium that results from the endergonic nature of these reactions, despite a potentially lower reaction barrier for the halogenation pathway. In contrast, halogen transfer is favored for secondary carbon radicals, for which the halogenated product complex is thermodynamically more stable than the reactant complex. These results are rationalized by considering the relative strengths of the C–X bonds that are formed for tertiary versus secondary carbon centers. The computational analysis also shows that the reaction barrier for halogen transfer is significantly dependent on secondary coordination sphere effects, including steric and H-bonding interactions.

Probing the Mechanism of Isonitrile Formation by a Non-Heme Iron(II)-Dependent Oxidase/Decarboxylase

The isonitrile moiety is an electron-rich functionality that decorates various bioactive natural products isolated from diverse kingdoms of life. Isonitrile biosynthesis was restricted for over a decade to isonitrile synthases, a family of enzymes catalyzing a condensation reaction between l-Trp/l-Tyr and ribulose-5-phosphate. The discovery of ScoE, a non-heme iron(II) and α-ketoglutarate-dependent dioxygenase, demonstrated an alternative pathway employed by nature for isonitrile installation. Biochemical, crystallographic, and computational investigations of ScoE have previously been reported, yet the isonitrile formation mechanism remains obscure. In the present work, we employed in vitro biochemistry, chemical synthesis, spectroscopy techniques, and computational simulations that enabled us to propose a plausible molecular mechanism for isonitrile formation. Our findings demonstrate that the ScoE reaction initiates with C5 hydroxylation of (R)-3-((carboxymethyl)amino)butanoic acid to generate 1, which undergoes dehydration, presumably mediated by Tyr96 to synthesize 2 in a trans configuration. (R)-3-isocyanobutanoic acid is finally generated through radical-based decarboxylation of 2, instead of the common hydroxylation pathway employed by this enzyme superfamily.

Local Electric Fields Dictate Function: The Different Product Selectivities Observed for Fatty Acid Oxidation by Two Deceptively Very Similar P450-Peroxygenases OleT and BSβ

Cytochrome P450 peroxygenases use hydrogen peroxide to hydroxylate long-chain fatty acids by bypassing the use of O₂ and a redox partner. Among the peroxygenases, P450_OleT uniquely performs decarboxylation of fatty acids and production of terminal olefins. This route taken by P450_OleT is intriguing, and its importance is augmented by the practical importance of olefin production. As such, this mechanistic choice merits elucidation. To address this puzzle, we use hybrid QM/MM calculations and MD simulations for the OleT enzyme as well as for the structurally analogous enzyme, P450_BSβ. The study of P450_OleT reveals that the protonated His85 in the wild-type P450_OleT plays a crucial role in steering decarboxylation activity by stabilizing the corresponding hydroxoiron(IV) intermediate (Cpd II). In contrast, for P450_BSβ in which Q85 replaces H85, the respective Cpd II species is unstable and it reacts readily with the substrate radical by rebound, producing hydroxylation products. As shown, this single-site difference creates in P450_OleT a local electric field (LEF), which is significantly higher than that in P450_BSβ. In turn, these LEF differences are responsible for the different stabilities of the respective Cpd II/radical intermediates and hence for different functions of the two enzymes. P450_BSβ uses the common rebound mechanism and leads to hydroxylation, whereas P450_OleT proceeds via decarboxylation and generates terminal olefins. Olefin production projects the power of a single residue to alter the LEF and the enzyme's function.

Computational Study of the Peroxygenase Mechanism Catalyzed by Hemoglobin Dehaloperoxidase Involved in the Degradation of Chlorophenols

The biochemical evidence showed that hemoglobin dehaloperoxidase (DHP B) from Amphitrite Ornata is a multifunctional hemoprotein that catalyzes both dehalogenation and hydroxylation of halophenols via the peroxidase and peroxygenase mechanism, respectively, which sets the basis for the degradation of halophenols. In the peroxygenase mechanism, the reaction was previously suggested to be triggered either by the hydrogen atom abstraction by the Fe═O center or by the proton abstraction by His55. To illuminate the peroxygenase mechanism of DHP B at the atomistic level, on the basis of the high-resolution crystal structure, computational models were constructed, and a series of quantum mechanical/molecular mechanical calculations have been performed. According to the calculation results, the pathway (Path a) initiated by the H-abstraction by the Fe═O center is feasible. In another pathway (Path b), His55 can abstract the proton from the hydroxyl group of the substrate (4-Cl-o-cresol) to initiate the reaction; however, its feasibility depends on the prior electron transfer from the substrate to the porphyrin group. The rate-limiting step of Path a is the OH-rebound, which corresponds to an energy barrier of 14.7 kcal/mol at the quartet state. His55 acts as an acid-base catalyst and directly involves in the catalysis. Our mutant study indicates that His55 can be replaced by other titratable residues. These findings may provide useful information for further understanding of the catalytic reaction of DHP B and for the design of enzymes in the degradation of pollutants, in particular, halophenols.

Shortening Synthetic Routes to Small Molecule Active Pharmaceutical Ingredients Employing Biocatalytic Methods

Biocatalysis, using enzymes for organic synthesis, has emerged as powerful tool for the synthesis of active pharmaceutical ingredients (APIs). The first industrial biocatalytic processes launched in the first half of the last century exploited whole-cell microorganisms where the specific enzyme at work was not known. In the meantime, novel molecular biology methods, such as efficient gene sequencing and synthesis, triggered breakthroughs in directed evolution for the rapid development of process-stable enzymes with broad substrate scope and good selectivities tailored for specific substrates. To date, enzymes are employed to enable shorter, more efficient, and more sustainable alternative routes toward (established) small molecule APIs, and are additionally used to perform standard reactions in API synthesis more efficiently. Herein, large-scale synthetic routes containing biocatalytic key steps toward >130 APIs of approved drugs and drug candidates are compared with the corresponding chemical protocols (if available) regarding the steps, reaction conditions, and scale. The review is structured according to the functional group formed in the reaction.

Unexpected Reactions of α,β-Unsaturated Fatty Acids Provide Insight into the Mechanisms of CYP152 Peroxygenases

CYP152 peroxygenases catalyze decarboxylation and hydroxylation of fatty acids using H₂ O₂ as cofactor. To understand the molecular basis for the chemo- and regioselectivity of these unique P450 enzymes, we analyze the activities of three CYP152 peroxygenases (OleT_JE , P450_SPα , P450_BSβ ) towards cis- and trans-dodecenoic acids as substrate probes. The unexpected 6S-hydroxylation of the trans-isomer and 4R-hydroxylation of the cis-isomer by OleT_JE , and molecular docking results suggest that the unprecedented selectivity is due to OleT_JE 's preference of C2-C3 cis-configuration. In addition to the common epoxide products, undecanal is the unexpected major product of P450_SPα and P450_BSβ regardless of the cis/trans-configuration of substrates. The combined H₂ ¹⁸ O₂ tracing experiments, MD simulations, and QM/MM calculations unravel an unusual mechanism for Compound I-mediated aldehyde formation in which the active site water derived from H₂ O₂ activation is involved in the generation of a four-membered ring lactone intermediate. These findings provide new insights into the unusual mechanisms of CYP152 peroxygenases.

Structural and biochemical studies enlighten the unspecific peroxygenase from Hypoxylon sp. EC38 as an efficient oxidative biocatalyst

Unspecific peroxygenases (UPO) are glycosylated fungal enzymes that can selectively oxidize C-H bonds. UPOs employ hydrogen peroxide as oxygen donor and reductant. With such an easy-to-handle co-substrate and without the need of a reducing agent, UPOs are emerging as convenient oxidative biocatalysts. Here, an unspecific peroxygenase from Hypoxylon sp. EC38 (HspUPO) was identified in an activity-based screen of six putative peroxygenase enzymes that were heterologously expressed in Pichia pastoris. The enzyme was found to tolerate selected organic solvents such as acetonitrile and acetone. HspUPO is a versatile catalyst performing various reactions, such as the oxidation of prim- and sec-alcohols, epoxidations and hydroxylations. Semi-preparative biotransformations were demonstrated for the non-enantioselective oxidation of racemic 1-phenylethanol rac -1b (TON = 13000), giving the product with 88% isolated yield, and the oxidation of indole 6a to give indigo 6b (TON = 2800) with 98% isolated yield. HspUPO features a compact and rigid three-dimensional conformation that wraps around the heme and defines a funnel-shaped tunnel that leads to the heme iron from the protein surface. The tunnel extends along a distance of about 12 Å with a fairly constant diameter in its innermost segment. Its surface comprises both hydrophobic and hydrophilic groups for dealing with small-to-medium size substrates of variable polarities. The structural investigation of several protein-ligand complexes revealed that the active site of HspUPO is accessible to molecules of varying bulkiness and polarity with minimal or no conformational changes, explaining the relatively broad substrate scope of the enzyme. With its convenient expression system, robust operational properties, relatively small size, well-defined structural features, and diverse reaction scope, HspUPO is an exploitable candidate for peroxygenase-based biocatalysis.

Structure and Functional Differences of Cysteine and 3-Mercaptopropionate Dioxygenases: A Computational Study

Thiol dioxygenases are important enzymes for human health; they are involved in the detoxification and catabolism of toxic thiol-containing natural products such as cysteine. As such, these enzymes have relevance to the development of Alzheimer's and Parkinson's diseases in the brain. Recent crystal structure coordinates of cysteine and 3-mercaptopropionate dioxygenase (CDO and MDO) showed major differences in the second-coordination spheres of the two enzymes. To understand the difference in activity between these two analogous enzymes, we created large, active-site cluster models. We show that CDO and MDO have different iron(III)-superoxo-bound structures due to differences in ligand coordination. Furthermore, our studies show that the differences in the second-coordination sphere and particularly the position of a positively charged Arg residue results in changes in substrate positioning, mobility and enzymatic turnover. Furthermore, the substrate scope of MDO is explored with cysteinate and 2-mercaptosuccinic acid and their reactivity is predicted.

P450-driven plastic-degrading synthetic bacteria

Plastic contamination currently threatens a wide variety of ecosystems and presents damaging repercussions and negative consequences for many wildlife species. Sustainable plastic waste management is an important approach to environmental protection and a necessity in the current life cycle of plastics in nature. Plastic biodegradation by microorganisms is a notable possible solution. This opinion article includes a proposal to use hypothetical P450 enzymes with an engineered active site as potent trigger biocatalysts to biodegrade polyethylene (PE) via in-chain hydroxylation into smaller products of linear aliphatic alcohols and alkanoic acids based on cascade enzymatic reactions. Furthermore, we propose the adoption of P450 into plastic-eating synthetic bacteria for PE biodegradation. This strategy can be applicable to other dense plastics, such as polypropylene (PP) and polystyrene (PS).

Product Distributions of Cytochrome P450 OleTJE with Phenyl-Substituted Fatty Acids: A Computational Study

There are two types of cytochrome P450 enzymes in nature, namely, the monooxygenases and the peroxygenases. Both enzyme classes participate in substrate biodegradation or biosynthesis reactions in nature, but the P450 monooxygenases use dioxygen, while the peroxygenases take H₂O₂ in their catalytic cycle instead. By contrast to the P450 monooxygenases, the P450 peroxygenases do not require an external redox partner to deliver electrons during the catalytic cycle, and also no external proton source is needed. Therefore, they are fully self-sufficient, which affords them opportunities in biotechnological applications. One specific P450 peroxygenase, namely, P450 OleT_JE, reacts with long-chain linear fatty acids through oxidative decarboxylation to form hydrocarbons and, as such, has been implicated as a suitable source for the biosynthesis of biofuels. Unfortunately, the reactions were shown to produce a considerable amount of side products originating from C^α and C^β hydroxylation and desaturation. These product distributions were found to be strongly dependent on whether the substrate had substituents on the C^α and/or C^β atoms. To understand the bifurcation pathways of substrate activation by P450 OleT_JE leading to decarboxylation, C^α hydroxylation, C^β hydroxylation and C^α–C^β desaturation, we performed a computational study using 3-phenylpropionate and 2-phenylbutyrate as substrates. We set up large cluster models containing the heme, the substrate and the key features of the substrate binding pocket and calculated (using density functional theory) the pathways leading to the four possible products. This work predicts that the two substrates will react with different reaction rates due to accessibility differences of the substrates to the active oxidant, and, as a consequence, these two substrates will also generate different products. This work explains how the substrate binding pocket of P450 OleT_JE guides a reaction to a chemoselectivity.

Density Functional Theory Study into the Reaction Mechanism of Isonitrile Biosynthesis by the Nonheme Iron Enzyme ScoE

The nonheme iron enzyme ScoE catalyzes the biosynthesis of an isonitrile substituent in a peptide chain. To understand details of the reaction mechanism we created a large active site cluster model of 212 atoms that contains substrate, the active oxidant and the first- and second-coordination sphere of the protein and solvent. Several possible reaction mechanisms were tested and it is shown that isonitrile can only be formed through two consecutive catalytic cycles that both use one molecule of dioxygen and α-ketoglutarate. In both cycles the active species is an iron(IV)-oxo species that in the first reaction cycle reacts through two consecutive hydrogen atom abstraction steps: first from the N–H group and thereafter from the C–H group to desaturate the NH-CH2 bond. The alternative ordering of hydrogen atom abstraction steps was also tested but found to be higher in energy. Moreover, the electronic configurations along that pathway implicate an initial hydride transfer followed by proton transfer. We highlight an active site Lys residue that is shown to donate charge in the transition states and influences the relative barrier heights and bifurcation pathways. A second catalytic cycle of the reaction of iron(IV)-oxo with desaturated substrate starts with hydrogen atom abstraction followed by decarboxylation to give isonitrile directly. The catalytic cycle is completed with a proton transfer to iron(II)-hydroxo to generate the iron(II)-water resting state. The work is compared with experimental observation and previous computational studies on this system and put in a larger perspective of nonheme iron chemistry.

Electrostatic Perturbations from the Protein Affect C-H Bond Strengths of the Substrate and Enable Negative Catalysis in the TmpA Biosynthesis Enzyme

The nonheme iron dioxygenase 2-(trimethylammonio)-ethylphosphonate dioxygenase (TmpA) is an enzyme involved in the regio- and chemoselective hydroxylation at the C¹ -position of the substrate as part of the biosynthesis of glycine betaine in bacteria and carnitine in humans. To understand how the enzyme avoids breaking the weak C² -H bond in favor of C¹ -hydroxylation, we set up a cluster model of 242 atoms representing the first and second coordination sphere of the metal center and substrate binding pocket, and investigated possible reaction mechanisms of substrate activation by an iron(IV)-oxo species by density functional theory methods. In agreement with experimental product distributions, the calculations predict a favorable C¹ -hydroxylation pathway. The calculations show that the selectivity is guided through electrostatic perturbations inside the protein from charged residues, external electric fields and electric dipole moments. In particular, charged residues influence and perturb the homolytic bond strength of the C¹ -H and C² -H bonds of the substrate, and strongly strengthens the C² -H bond in the substrate-bound orientation.

Cannabichromene and Δ9-Tetrahydrocannabinolic Acid Identified as Lactate Dehydrogenase-A Inhibitors by in Silico and in Vitro Screening

Cannabis sativa contains >120 phytocannabinoids, but our understanding of these compounds is limited. Determining the molecular modes of action of the phytocannabinoids may assist in their therapeutic development. Ligand-based virtual screening was used to suggest novel protein targets for phytocannabinoids. The similarity ensemble approach, a virtual screening tool, was applied to target identification for the phytocannabinoids as a class and predicted a possible interaction with the lactate dehydrogenase (LDH) family of enzymes. In order to evaluate this in silico prediction, a panel of 18 phytocannabinoids was screened against two LDH isozymes (LDHA and LDHB) in vitro. Cannabichromene (CBC) and Δ⁹-tetrahydrocannabinolic acid (Δ⁹-THCA) inhibited LDHA via a noncompetitive mode of inhibition with respect to pyruvate, with K_i values of 8.5 and 6.5 μM, respectively. In silico modeling was then used to predict the binding site for CBC and Δ⁹-THCA. Both were proposed to bind within the nicotinamide pocket, overlapping the binding site of the cofactor NADH, which is consistent with the noncompetitive modes of inhibition. Stemming from our in silico screen, CBC and Δ⁹-THCA were identified as inhibitors of LDHA, a novel molecular target that may contribute to their therapeutic effects.

A comprehensive insight into aldehyde deformylation: mechanistic implications from biology and chemistry

Aldehyde deformylation is an important reaction in biology, organic chemistry and inorganic chemistry and the process has been widely applied and utilized. For instance, in biology, the aldehyde deformylation reaction has wide differences in biological function, whereby cyanobacteria convert aldehydes into alkanes or alkenes, which are used as natural products for, e.g., defense mechanisms. By contrast, the cytochromes P450 catalyse the biosynthesis of hormones, such as estrogen, through an aldehyde deformylation reaction step. In organic chemistry, the aldehyde deformylation reaction is a common process for replacing functional groups on a molecule, and as such, many different synthetic methods and procedures have been reported that involve an aldehyde deformylation step. In bioinorganic chemistry, a variety of metal(iii)-peroxo complexes have been synthesized as biomimetic models and shown to react efficiently with aldehydes through deformylation reactions. This review paper provides an overview of the various aldehyde deformylation reactions in organic chemistry, biology and biomimetic model systems, and shows a broad range of different chemical reaction mechanisms for this process. Although a nucleophilic attack at the carbonyl centre is the consensus reaction mechanism, several examples of an alternative electrophilic reaction mechanism starting with hydrogen atom abstraction have been reported as well. There is still much to learn and to discover on aldehyde deformylation reactions, as deciphered in this review paper.

Generation of Oxidoreductases with Dual Alcohol Dehydrogenase and Amine Dehydrogenase Activity

The l-lysine-ϵ-dehydrogenase (LysEDH) from Geobacillus stearothermophilus naturally catalyzes the oxidative deamination of the ϵ-amino group of l-lysine. We previously engineered this enzyme to create amine dehydrogenase (AmDH) variants that possess a new hydrophobic cavity in their active site such that aromatic ketones can bind and be converted into α-chiral amines with excellent enantioselectivity. We also recently observed that LysEDH was capable of reducing aromatic aldehydes into primary alcohols. Herein, we harnessed the promiscuous alcohol dehydrogenase (ADH) activity of LysEDH to create new variants that exhibited enhanced catalytic activity for the reduction of substituted benzaldehydes and arylaliphatic aldehydes to primary alcohols. Notably, these novel engineered dehydrogenases also catalyzed the reductive amination of a variety of aldehydes and ketones with excellent enantioselectivity, thus exhibiting a dual AmDH/ADH activity. We envisioned that the catalytic bi-functionality of these enzymes could be applied for the direct conversion of alcohols into amines. As a proof-of-principle, we performed an unprecedented one-pot "hydrogen-borrowing" cascade to convert benzyl alcohol to benzylamine using a single enzyme. Conducting the same biocatalytic cascade in the presence of cofactor recycling enzymes (i.e., NADH-oxidase and formate dehydrogenase) increased the reaction yields. In summary, this work provides the first examples of enzymes showing "alcohol aminase" activity.

How external perturbations affect the chemoselectivity of substrate activation by cytochrome P450 OleTJE

Cytochrome P450 enzymes are versatile biocatalysts found in most forms of life. Generally, the cytochrome P450s react with dioxygen and hence are haem-based mono-oxygenases; however, in specific isozymes, H2O2 rather than O2 is used and these P450s act as peroxygenases. The P450 OleTJE is a peroxygenase that binds long to medium chain fatty acids and converts them to a range of products originating from Cα-hydroxylation, Cβ-hydroxylation, Cα-Cβ desaturation and decarboxylation of the substrate. There is still controversy regarding the details of the reaction mechanism of P450 OleTJE; how the products are formed and whether the product distributions can be influenced by external perturbations. To gain further insights into the structure and reactivity of P450 OleTJE, we set up a range of large active site model complexes as well as full enzymatic structures and did a combination of density functional theory studies and quantum mechanics/molecular mechanics calculations. In particular, the work focused on the mechanisms leading to these products under various reaction conditions. Thus, for a small cluster model, we find a highly selective Cα-hydroxylation pathway that is preferred over Cβ-H hydrogen atom abstraction by at least 10 kcal mol-1. Introduction of polar residues to the model, such as an active site protonated histidine residue or through external electric field effects, lowers the Cβ-H hydrogen atom abstraction barriers are lowered, while a full QM/MM model brings the Cα-H and Cβ-H hydrogen atom abstraction barriers within 1 kcal mol-1. Our studies; therefore, implicate that environmental effects in the second-coordination sphere can direct and guide selectivities in enzymatic reaction mechanisms.

A Photoclick-Based High-Throughput Screening for the Directed Evolution of Decarboxylase OleT

Enzymatic oxidative decarboxylation is an up-and-coming reaction yet lacking efficient screening methods for the directed evolution of decarboxylases. Here, we describe a simple photoclick assay for the detection of decarboxylation products and its application in a proof-of-principle directed evolution study on the decarboxylase OleT. The assay was compatible with two frequently used OleT operation modes (directly using hydrogen peroxide as the enzyme's co-substrate or using a reductase partner) and the screening of saturation mutagenesis libraries identified two enzyme variants shifting the enzyme's substrate preference from long chain fatty acids toward styrene derivatives. Overall, this photoclick assay holds promise to speed-up the directed evolution of OleT and other decarboxylases.

What Determines the Selectivity of Arginine Dihydroxylation by the Nonheme Iron Enzyme OrfP?

The nonheme iron enzyme OrfP reacts with l-Arg selectively to form the 3R,4R-dihydroxyarginine product, which in mammals can inhibit the nitric oxide synthase enzymes involved in blood pressure control. To understand the mechanisms of dioxygen activation of l-Arg by OrfP and how it enables two sequential oxidation cycles on the same substrate, we performed a density functional theory study on a large active site cluster model. We show that substrate binding and positioning in the active site guides a highly selective reaction through C³ -H hydrogen atom abstraction. This happens despite the fact that the C³ -H and C⁴ -H bond strengths of l-Arg are very similar. Electronic differences in the two hydrogen atom abstraction pathways drive the reaction with an initial C³ -H activation to a low-energy ⁵ σ-pathway, while substrate positioning destabilizes the C⁴ -H abstraction and sends it over the higher-lying ⁵ π-pathway. We show that substrate and monohydroxylated products are strongly bound in the substrate binding pocket and hence product release is difficult and consequently its lifetime will be long enough to trigger a second oxygenation cycle.

P450Jα : A New, Robust and α-Selective Fatty Acid Hydroxylase Displaying Unexpected 1-Alkene Formation

Oxyfunctionalization of fatty acids (FAs) is a key step in the design of novel synthetic pathways for biobased/biodegradable polymers, surfactants and fuels. Here, we show the isolation and characterization of a robust FA α-hydroxylase (P450_Jα ) which catalyses the selective conversion of a broad range of FAs (C6:0-C16:0) and oleic acid (C18:1) with H₂ O₂ as oxidant. Under optimized reaction conditions P450_Jα yields α-hydroxy acids all with >95 % regioselectivity, high specific activity (up to 15.2 U mg^-1 ) and efficient coupling of oxidant to product (up to 85 %). Lauric acid (C12:0) turned out to be an excellent substrate with respect to productivity (TON=394 min^-1 ). On preparative scale, conversion of C12:0 reached 83 % (0.9 g L^-1 ) when supplementing H₂ O₂ in fed-batch mode. Under similar conditions P450_Jα allowed further the first biocatalytic α-hydroxylation of oleic acid (88 % conversion on 100 mL scale) at high selectivity and in good yields (1.1 g L^-1 ; 79 % isolated yield). Unexpectedly, P450_Jα displayed also 1-alkene formation from shorter chain FAs (≤C10:0) showing that oxidative decarboxylation is more widely distributed across this enzyme family than reported previously.

Production of Propene from n-Butanol: A Three-Step Cascade Utilizing the Cytochrome P450 Fatty Acid Decarboxylase OleTJE

Propene is one of the most important starting materials in the chemical industry. Herein, we report an enzymatic cascade reaction for the biocatalytic production of propene starting from n-butanol, thus offering a biobased production from glucose. In order to create an efficient system, we faced the issue of an optimal cofactor supply for the fatty acid decarboxylase OleTJE , which is said to be driven by either NAD(P)H or H2 O2 . In the first system, we used an alcohol and aldehyde dehydrogenase coupled to OleTJE by the electron-transfer complex putidaredoxin reductase/putidaredoxin, allowing regeneration of the NAD+ cofactor. With the second system, we intended full oxidation of n-butanol to butyric acid, generating one equivalent of H2 O2 that can be used for the oxidative decarboxylation. As the optimal substrate is a long-chain fatty acid, we also tried to create an improved variant for the decarboxylation of butyric acid by using rational protein design. Within a mutational study with 57 designed mutants, we generated the mutant OleTV292I , which showed a 2.4-fold improvement in propene production in our H2 O2 -driven cascade system and reached total turnover numbers >1000.

Hydroxyl Transfer to Carbon Radicals by Mn(OH) vs Fe(OH) Corrole Complexes

The transfer of •OH from metal-hydroxo species to carbon radicals (R•) to give hydroxylated products (ROH) is a fundamental process in metal-mediated heme and nonheme C-H bond oxidations. This step, often referred to as the hydroxyl "rebound" step, is typically very fast, making direct study of this process challenging if not impossible. In this report, we describe the reactions of the synthetic models M(OH)(ttppc) (M = Fe (1), Mn (3); ttppc = 5,10,15-tris(2,4,6-triphenyl)phenyl corrolato^3-) with a series of triphenylmethyl carbon radical (R•) derivatives ((4-X-C₆H₄)₃C•; X = OMe, tBu, Ph, Cl, CN) to give the one-electron reduced M^III(ttppc) complexes and ROH products. Rate constants for 3 for the different radicals ranged from 11.4(1) to 58.4(2) M^-1 s^-1, as compared to those for 1, which fall between 0.74(2) and 357(4) M^-1 s^-1. Linear correlations for Hammett and Marcus plots for both Mn and Fe were observed, and the small magnitudes of the slopes for both correlations imply a concerted •OH transfer reaction for both metals. Eyring analyses of reactions for 1 and 3 with (4-X-C₆H₄)₃C• (X = tBu, CN) also give good linear correlations, and a comparison of the resulting activation parameters highlight the importance of entropy in these •OH transfer reactions. Density functional theory calculations of the reaction profiles show a concerted process with one transition state for all radicals investigated and help to explain the electronic features of the OH rebound process.

Lignin Biodegradation by a Cytochrome P450 Enzyme: A Computational Study into Syringol Activation by GcoA

A recently characterized cytochrome P450 isozyme GcoA activates lignin components through a selective O-demethylation or alternatively an acetal formation reaction. These are important reactions in biotechnology and, because lignin is readily available; it being the main component in plant cell walls. In this work we present a density functional theory study on a large active site model of GcoA to investigate syringol activation by an iron(IV)-oxo heme cation radical oxidant (Compound I) leading to hemiacetal and acetal products. Several substrate-binding positions were tested and full energy landscapes calculated. The study shows that substrate positioning determines the product distributions. Thus, with the phenol group pointing away from the heme, an O-demethylation is predicted, whereas an initial hydrogen-atom abstraction of the weak phenolic O-H group would trigger a pathway leading to ring-closure to form acetal products. Predictions on how to engineer P450 GcoA to get more selective product distributions are given.

Catalytic Mechanism of Aromatic Nitration by Cytochrome P450 TxtE: Involvement of a Ferric-Peroxynitrite Intermediate

The cytochromes P450 are heme-dependent enzymes that catalyze many vital reaction processes in the human body related to biodegradation and biosynthesis. They typically act as mono-oxygenases; however, the recently discovered P450 subfamily TxtE utilizes O₂ and NO to nitrate aromatic substrates such as L-tryptophan. A direct and selective aromatic nitration reaction may be useful in biotechnology for the synthesis of drugs or small molecules. Details of the catalytic mechanism are unknown, and it has been suggested that the reaction should proceed through either an iron(III)-superoxo or an iron(II)-nitrosyl intermediate. To resolve this controversy, we used stopped-flow kinetics to provide evidence for a catalytic cycle where dioxygen binds prior to NO to generate an active iron(III)-peroxynitrite species that is able to nitrate l-Trp efficiently. We show that the rate of binding of O₂ is faster than that of NO and also leads to l-Trp nitration, while little evidence of product formation is observed from the iron(II)-nitrosyl complex. To support the experimental studies, we performed density functional theory studies on large active site cluster models. The studies suggest a mechanism involving an iron(III)-peroxynitrite that splits homolytically to form an iron(IV)-oxo heme (Compound II) and a free NO₂ radical via a small free energy of activation. The latter activates the substrate on the aromatic ring, while compound II picks up the ipso-hydrogen to form the product. The calculations give small reaction barriers for most steps in the catalytic cycle and, therefore, predict fast product formation from the iron(III)-peroxynitrite complex. These findings provide the first detailed insight into the mechanism of nitration by a member of the TxtE subfamily and highlight how the enzyme facilitates this novel reaction chemistry.