Alternative Oxidation Reactions for Solar-Driven Fuel Production

Metal-insulator-semiconductor photoelectrodes for enhanced photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting provides a scalable and integrated platform to harness renewable solar energy for green hydrogen production. The practical implementation of PEC systems hinges on addressing three critical challenges: enhancing energy conversion efficiency, ensuring long-term stability, and achieving economic viability. Metal-insulator-semiconductor (MIS) heterojunction photoelectrodes have gained significant attention over the last decade for their ability to efficiently segregate photogenerated carriers and mitigate corrosion-induced semiconductor degradation. This review discusses the structural composition and interfacial intricacies of MIS photoelectrodes tailored for PEC water splitting. The application of MIS heterostructures across various semiconductor light-absorbing layers, including traditional photovoltaic-grade semiconductors, metal oxides, and emerging materials, is presented first. Subsequently, this review elucidates the reaction mechanisms and respective merits of vacuum and non-vacuum deposition techniques in the fabrication of the insulator layers. In the context of the metal layers, this review extends beyond the conventional scope, not only by introducing metal-based cocatalysts, but also by exploring the latest advancements in molecular and single-atom catalysts integrated within MIS photoelectrodes. Furthermore, a systematic summary of carrier transfer mechanisms and interface design principles of MIS photoelectrodes is presented, which are pivotal for optimizing energy band alignment and enhancing solar-to-chemical conversion efficiency within the PEC system. Finally, this review explores innovative derivative configurations of MIS photoelectrodes, including back-illuminated MIS photoelectrodes, inverted MIS photoelectrodes, tandem MIS photoelectrodes, and monolithically integrated wireless MIS photoelectrodes. These novel architectures address the limitations of traditional MIS structures by effectively coupling different functional modules, minimizing optical and ohmic losses, and mitigating recombination losses.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

N-CoFeP/NF electrocatalyst for coupling hydrogen production and oxidation reaction of various alcohols

Replacing the oxygen evolution reaction with the alcohols oxidation reaction (AOR) in electrolytic water is not only expected to reduce the overall energy consumption, but also realize the green synthesis of high value-added chemicals. However, designing high-activity electrocatalysts toward AOR yet faces a daunting challenge due to the indefinite conversion mechanism of different alcohols. Herein, a self-supported N-CoFeP/NF electrocatalyst on a nickel foam is synthesized via hydrothermal method, followed by low temperature nitriding and phosphating. The N-CoFeP/NF exhibits a fine nanorod nanostructure and high crystallinity. The AOR using N-CoFeP/NF catalysts requires a significantly lower potential (1.38-1.42 V vs. RHE) at 100 mA cm-2, reducing the energy input and the improvement of the overall efficiency. Moreover, alcohols with secondary hydroxyl groups located in the middle of the carbon chain underwent CC bond breakage during oxidation, yielding primarily formic acid (FE = 74 %) and acetic acid (FE = 50 %), which exhibits more attractive performance than alcohols with primary hydroxyl groups located at the end group did not undergo chemical bond breakage at a high current density of 400 mA cm-2. This study provides a novel and effective method to design TMPs and the selection of alcohols for anodic reaction, which can be used as a versatile strategy to improve the performance of anodic AOR coupled hydrogen evolution.

Effect of multi-interface electron transfer on water splitting and an innovative electrolytic cell for synergistic hydrogen production and degradation

The cleaning and utilization of industry wastewater are still a big challenge. In this work, we mainly investigate the effect of electron transfer among multi-interfaces on water electrolysis reaction. Typically, the CoS2, Co3S4/CoS2 (designated as CS4-2) and Co3S4/Co9S8/CoS2 (designated as CS4-8-2) samples are prepared on a large scale by one-step molten salt method. It is found that because of the different work functions (designated as WF; WF(Co3S4) = 4.48eV, WF(CoS2) = 4.41eV, WF(Co9S8) = 4.18 eV), the effective heterojunctions at the multi-interfaces of CS4-8-2 sample, which obviously improve interface charge transfer. Thus, the CS4-8-2 sample shows an excellent oxygen evolution reaction (OER) activity (134 mV/10 mA cm-2, 40 mV dec-1). The larger double-layer capacitance (Cdl = 17.1 mF cm-2) of the CS4-8-2 sample indicates more electrochemical active sites, compared to the CoS2 and CS4-2 samples. Density functional theory (DFT) calculation proves that due to interface polarization under electric field, the multi-interfaces effectively promote electron transfer and regulate electron structure, thus promoting the adsorption of OH- and dissociation of H2O. Moreover, an innovative norfloxacin (NFX) electrolytic cell (EC) is developed through introducing NFX into the electrolyte, in which efficient NFX degradation and hydrogen production are synergistically achieved. To reach 50 mA cm-2, the required cell voltage of NFX-EC has decreased by 35.2%, compared to conventional KOH-EC. After 2h running at 1 V, 25.5% NFX was degraded in the NFX EC. This innovative NFX-EC is highly energy-efficient, which is promising for the synergistic cleaning and utilization of industry wastewater.

Dye-Sensitized Photocatalysis: Hydrogen Evolution and Alcohol-to-Aldehyde Oxidation without Sacrifical Electron Donor

There is a growing interest in developing dye-sensitized photocatalytic systems (DSPs) to produce molecular hydrogen (H2 ) as alternative energy source. To improve the sustainability of this technology, we replaced the sacrificial electron donor (SED), typically an expensive and polluting chemical, with an alcohol oxidation catalyst. This study demonstrates the first dye-sensitized system using a diketopyrrolopyrrole dye covalently linked to 2,2,6,6-tetramethyl-1-piperidine-N-oxyl (TEMPO) based catalyst for simultaneous H2 evolution and alcohol-to-aldehyde transformation operating in water with visible irradiation.

Boosting the Oxygen Evolution Activity of FeNi Oxides/Hydroxides by Molecular and Atomic Engineering

FeNi oxides/hydroxides are the best performing catalysts for oxidizing water at basic pH. Consequently, their improvement is the cornerstone to develop more efficient artificial photosynthetic systems. During the last 5 years different reports have demonstrated an enhancement of their activity by engineering their structures via: (1) modulation of the number of oxygen, iron and nickel vacancies; (2) single atoms (SAs) doping with metals such as Au, Ir, Ru and Pt; and (3) modification of their surface using organic ligands. All these strategies have led to more active and stable electrocatalysts for oxygen evolution rection (OER). In this Concept, we critically analyze these strategies using the most relevant examples.

CFD modeling and simulation of benzyl alcohol oxidation coupled with hydrogen production in a continuous-flow photoelectrochemical reactor

Various conversion routes of biomass and its derivative compounds into high-value products has attracted attention from researchers recently. Among these, a solar-driven photoelectrochemical (PEC) oxidation approach of biomass alcohols to aldehydes is particularly of great interest for the potential applications because the reaction is selective and simultaneously accompanied with hydrogen production. Here, we propose a simulation of selective oxidation of benzyl alcohol into benzaldehyde coupled with hydrogen production in a 2-dimensional continuous-flow PEC reactor using COMSOL Multiphysics (5.6). In order to develop and fabricate a simple yet efficient reactor for a practical use, it is crucial to investigate the effects of operating and design parameters of the reactor on the reactions. Our studies demonstrated that the main contributions to product formation were the electrolyte flow velocity and the width of electrolyte channels. The optimized design parameter exhibited good photoelectrochemical performance with uniform potential distribution within the channels which served diffusion of neutral and charged species and electrochemical reaction. The maximum conversion of benzyl alcohol in this work was 48.25% with 100% selectivity of benzaldehyde. These findings are key for the design of the continuous-flow PEC reactor that can be applied to any series of biomass conversion reactions under mild conditions.

Photoinduced absorption spectroscopy (PIAS) study of water and chloride oxidation by a WO3 photoanode in acidic solution

The mechanisms of water and chloride oxidation by a WO3 photoanode are probed by photoinduced absorption spectroscopy (PIAS) coupled with transient photocurrent (TC) measurements. Linear sweep voltammograms (LSVs) and incident photon to current efficiencies (IPCEs) are obtained, in the water oxidation electrolyte (1 M HClO4) and chloride oxidation electrolyte (3.5 M NaCl in 1 M HClO4). Other work shows that the faradaic efficiency of water oxidation to O2 in 1 M HClO4 is ca. 1.0, and that for chloride oxidation to Cl2 in 3.5 M NaCl plus 1 M HClO4 is ca. 0.62. The PIAS/TC data reveals a 0.4 order dependency of the rate of water oxidation on the steady state concentration of photogenerated surface holes, [hs+]ss, and an approximately first order dependency of the rate of chloride oxidation on [hs+]ss. Associated mechanisms and rate determining steps for water and chloride oxidation at the photoanode surface that account for these reaction orders are proposed.

Investigation of BiVO4-based advanced oxidation system for decomposition of organic compounds and production of reactive sulfate species

Growth of population and expansion of industries lead to increasing contamination of environment with various organic pollutants. If not properly cleaned, wastewater contaminates freshwater resources, aquatic environment and has huge negative impact on ecosystems, quality of drinking water and human health, therefore new and effective purification systems are in demand. In this work bismuth vanadate-based advanced oxidation system (AOS) for the decomposition of organic compounds and production of reactive sulfate species (RSS) was investigated. Pure and Mo-doped BiVO₄ coatings were synthesized using sol-gel process. Composition and morphology of coatings were characterized using X-ray diffraction and scanning electron microscopy techniques. Optical properties were analyzed using UV-vis spectrometry. Photoelectrochemical performance was studied using linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy. It was shown that increase in Mo content affects the morphology of BiVO₄ films, reduces charge transfer resistance and enhances the photocurrent in the solutions of sodium borate buffer (with and without glucose) and Na₂SO₄. Mo-doping of 5-10 at.% leads to 2- to 3-fold increase in photocurrents. Faradaic efficiencies of RSS formation ranged between 70 and 90 % for all samples irrespective of Mo content. All studied coatings demonstrated high stability in long-lasting photoelectrolysis. In addition, effective light-assisted bactericidal performance of the films in deactivation of Gram positive Bacillus sp. bacteria was demonstrated. Advanced oxidation system designed in this work can be applied in sustainable and environmentally friendly water purification systems.

The Implications of Coupling an Electron Transfer Mediated Oxidation with a Proton Coupled Electron Transfer Reduction in Hybrid Water Electrolysis

Electrolysis of water is a sustainable route to produce clean hydrogen. Full water-splitting requires a high applied potential, in part because of the pH-dependency of the H₂ and O₂ evolution reactions (HER and OER), which are proton-coupled electron transfer (PCET) reactions. Therefore, the minimum required potential will not change at different pHs. TEMPO [(2,2,6,6-tetramethyl-1-piperidin-1-yl)oxyl], a stable free-radical that undergoes fast electro-oxidation by a single-electron transfer (ET) process, is pH-independent. Here, we show that the combination of PCET and ET processes enables hydrogen production from water at low cell potentials below the theoretical value for full water-splitting by simple pH adjustment. As a case study, we combined the HER with the oxidation of benzylamine by anodically oxidized TEMPO. The pH-independent electrocatalytic oxidation of TEMPO permits the operation of a hybrid water-splitting cell that shows promise to perform at a low cell potential (≈1 V) and neutral pH conditions.

Photoelectrochemical Epoxidation of Cyclohexene on an α-Fe2O3 Photoanode Using Water as the Oxygen Source

This study developed a safe and sustainable route for the epoxidation of cyclohexene using water as the source of oxygen at room temperature and ambient pressure. Here, we optimized the cyclohexene concentration, volume of solvent/water (CH₃CN, H₂O), time, and potential on the photoelectrochemical (PEC) cyclohexene oxidation reaction of the α-Fe₂O₃ photoanode. The α-Fe₂O₃ photoanode epoxidized cyclohexene to cyclohexene oxide with a 72.4 ± 3.6% yield and a 35.2 ± 1.6% Faradaic efficiency of 0.37 V vs Fc/Fc⁺ (0.8 V_Ag/AgCl) under 100 mW cm^-2. Furthermore, the irradiation of light (PEC) decreased the applied voltage of the electrochemical cell oxidation process by 0.47 V. This work supplies an energy-saving and environment-benign approach for producing value-added chemicals coupled with solar fuel generation. Epoxidation with green solvents via PEC methods has a high potential for different oxidation reactions of value-added and fine chemicals.

Alternatives to water oxidation in the photocatalytic water splitting reaction for solar hydrogen production

The photocatalytic water splitting process to produce H₂ is an attractive approach to meet energy demands while achieving carbon emission reduction targets. However, none of the current photocatalytic devices meets the criteria for practical sustainable H₂ production due to their insufficient efficiency and the resulting high H₂ cost. Economic viability may be achieved by simultaneously producing more valuable products than O₂ or integrating with reforming processes of real waste streams, such as plastic and food waste. Research over the past decade has begun to investigate the possibility of replacing water oxidation with more kinetically and thermodynamically facile oxidation reactions. We summarize how various alternative photo-oxidation reactions can be combined with proton reduction in photocatalysis to achieve chemical valorization with concurrent H₂ production. By examining the current advantages and challenges of these oxidation reactions, we intend to demonstrate that these technologies would contribute to providing H₂ energy, while also producing high-value chemicals for a sustainable chemical industry and eliminating waste.

Renewable formate from sunlight, biomass and carbon dioxide in a photoelectrochemical cell

The sustainable production of chemicals and fuels from abundant solar energy and renewable carbon sources provides a promising route to reduce climate-changing CO₂ emissions and our dependence on fossil resources. Here, we demonstrate solar-powered formate production from readily available biomass wastes and CO₂ feedstocks via photoelectrochemistry. Non-precious NiOOH/α-Fe₂O₃ and Bi/GaN/Si wafer were used as photoanode and photocathode, respectively. Concurrent photoanodic biomass oxidation and photocathodic CO₂ reduction towards formate with high Faradaic efficiencies over 85% were achieved at both photoelectrodes. The integrated biomass-CO₂ photoelectrolysis system reduces the cell voltage by 32% due to the thermodynamically favorable biomass oxidation over conventional water oxidation. Moreover, we show solar-driven formate production with a record-high yield of 23.3 μmol cm^-2 h^-1 as well as high robustness using the hybrid photoelectrode system. The present work opens opportunities for sustainable chemical and fuel production using abundant and renewable resources on earth-sunlight, biomass and CO₂.

Life cycle net energy assessment of sustainable H2 production and hydrogenation of chemicals in a coupled photoelectrochemical device

Green hydrogen has been identified as a critical enabler in the global transition to sustainable energy and decarbonized society, but it is still not economically competitive compared to fossil-fuel-based hydrogen. To overcome this limitation, we propose to couple photoelectrochemical (PEC) water splitting with the hydrogenation of chemicals. Here, we evaluate the potential of co-producing hydrogen and methyl succinic acid (MSA) by coupling the hydrogenation of itaconic acid (IA) inside a PEC water splitting device. A negative net energy balance is predicted to be achieved when the device generates only hydrogen, but energy breakeven can already be achieved when a small ratio (~2%) of the generated hydrogen is used in situ for IA-to-MSA conversion. Moreover, the simulated coupled device produces MSA with much lower cumulative energy demand than conventional hydrogenation. Overall, the coupled hydrogenation concept offers an attractive approach to increase the viability of PEC water splitting while at the same time decarbonizing valuable chemical production.

Controlled synthesis of Crx-FeCo2P nanoarrays on nickel foam for overall urea splitting

Urea splitting is a highly promising technology for hydrogen production to cope with the fossil energy crisis, which requires the development of catalysts with high electrocatalytic activity. In this article, Cr_x-FeCo₂P/NF catalysts were synthesized by hydrothermal and low-temperature phosphorylation and used in the overall urea splitting process. Cr_0.15-FeCo₂P/NF and Cr_0.1-FeCo₂P/NF exhibited excellent urea oxidation reaction (UOR) activity (potential of 1.355 V at 100 mA cm^-2) and hydrogen evolution reaction (HER) activity (overpotential of 173 mV at 10 mA cm^-2) in 0.5 M urea solution containing 1 M KOH. In the assembled Cr_0.15-FeCo₂P/NF//Cr_0.1-FeCo₂P/NF electrolytic cell, only a small voltage of 1.50 V is needed to reach 10 mA cm^-2. Density functional theory (DFT) calculation results demonstrate that an appropriate amount of Cr doping accelerates the kinetic performance of hydrogen production as well as improving the metallic properties of the electrode.

Innovative Electrochemical Strategies for Hydrogen Production: From Electricity Input to Electricity Output

Renewable H₂ production by water electrolysis has attracted much attention due to its numerous advantages. However, the energy consumption of conventional water electrolysis is high and mainly driven by the kinetically inert anodic oxygen evolution reaction. An alternative approach is the coupling of different half-cell reactions and the use of redox mediators. In this review, we, therefore, summarize the latest findings on innovative electrochemical strategies for H₂ production. First, we address redox mediators utilized in water splitting, including soluble and insoluble species, and the corresponding cell concepts. Second, we discuss alternative anodic reactions involving organic and inorganic chemical transformations. Then, electrochemical H₂ production at both the cathode and anode, or even H₂ production together with electricity generation, is presented. Finally, the remaining challenges and prospects for the future development of this research field are highlighted.

Recent Development of Nickel-Based Electrocatalysts for Urea Electrolysis in Alkaline Solution

Recently, urea electrolysis has been regarded as an up-and-coming pathway for the sustainability of hydrogen fuel production according to its far lower theoretical and thermodynamic electrolytic cell potential (0.37 V) compared to water electrolysis (1.23 V) and rectification of urea-rich wastewater pollution. The new era of the "hydrogen energy economy" involving urea electrolysis can efficiently promote the development of a low-carbon future. In recent decades, numerous inexpensive and fruitful nickel-based materials (metallic Ni, Ni-alloys, oxides/hydroxides, chalcogenides, nitrides and phosphides) have been explored as potential energy saving monofunctional and bifunctional electrocatalysts for urea electrolysis in alkaline solution. In this review, we start with a discussion about the basics and fundamentals of urea electrolysis, including the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER), and then discuss the strategies for designing electrocatalysts for the UOR, HER and both reactions (bifunctional). Next, the catalytic performance, mechanisms and factors including morphology, composition and electrode/electrolyte kinetics for the ameliorated and diminished activity of the various aforementioned nickel-based electrocatalysts for urea electrolysis, including monofunctional (UOR or HER) and bifunctional (UOR and HER) types, are summarized. Lastly, the features of persisting challenges, future prospects and expectations of unravelling the bifunctional electrocatalysts for urea-based energy conversion technologies, including urea electrolysis, urea fuel cells and photoelectrochemical urea splitting, are illuminated.

Role of Nanoscale Inhomogeneities in Co2FeO4 Catalysts during the Oxygen Evolution Reaction

Spinel-type catalysts are promising anode materials for the alkaline oxygen evolution reaction (OER), exhibiting low overpotentials and providing long-term stability. In this study, we compared two structurally equal Co₂FeO₄ spinels with nominally identical stoichiometry and substantially different OER activities. In particular, one of the samples, characterized by a metastable precatalyst state, was found to quickly achieve its steady-state optimum operation, while the other, which was initially closer to the ideal crystallographic spinel structure, never reached such a state and required 168 mV higher potential to achieve 1 mA/cm². In addition, the enhanced OER activity was accompanied by a larger resistance to corrosion. More specifically, using various ex situ, quasi in situ, and operando methods, we could identify a correlation between the catalytic activity and compositional inhomogeneities resulting in an X-ray amorphous Co²⁺-rich minority phase linking the crystalline spinel domains in the as-prepared state. Operando X-ray absorption spectroscopy revealed that these Co²⁺-rich domains transform during OER to structurally different Co³⁺-rich domains. These domains appear to be crucial for enhancing OER kinetics while exhibiting distinctly different redox properties. Our work emphasizes the necessity of the operando methodology to gain fundamental insight into the activity-determining properties of OER catalysts and presents a promising catalyst concept in which a stable, crystalline structure hosts the disordered and active catalyst phase.

Ultrathin Two-Dimensional ZnIn2S4/Nix-B Heterostructure for High-Performance Photocatalytic Fine Chemical Synthesis and H2 Generation

Photocatalytic H₂ evolution coupled with organic transformation provides a new avenue to cooperatively produce clean fuels and fine chemicals, enabling a more efficient conversion of solar energy. Here, a novel two-dimensional (2D) heterostructure of ultrathin ZnIn₂S₄ nanosheets decorated with amorphous nickel boride (Ni_x-B) is prepared for simultaneous photocatalytic anaerobic H₂ generation and aromatic aldehydes production. This ZnIn₂S₄/Ni_x-B catalyst elaborately combines the ultrathin structure advantage of the ZnIn₂S₄ semiconductor and the cocatalytic function of Ni_x-B. A high H₂ production rate of 8.9 mmol h^-1 g^-1 is delivered over the optimal ZnIn₂S₄/Ni_x-B with a stoichiometric production of benzaldehyde, which is about 22 times higher than ZnIn₂S₄. Especially, the H₂ evolution rate is much higher than the value (2.8 mmol h^-1 g^-1) of the traditional photocatalytic half reaction of H₂ production with triethanolamine as a sacrificial agent. The apparent quantum yield reaches 24% at 420 nm, representing an advanced photocatalyst system. Moreover, compared with traditional sulfide, hydroxide, and even noble metal modified ZnIn₂S₄/M counterparts (M = NiS, Ni(OH)₂, Pt), the ZnIn₂S₄/Ni_x-B also maintains markedly higher photocatalytic activity, showing a highly efficient and economical advantage of the Ni_x-B cocatalyst. This work sheds light on the exploration of 2D ultrathin semiconductors decorated with novel transition metal boride cocatalyst for efficient photocatalytic organic transformation integrated with solar fuel production.

Beyond Water Oxidation: Hybrid, Molecular-Based Photoanodes for the Production of Value-Added Organics

The political and environmental problems related to the massive use of fossil fuels prompted researchers to develop alternative strategies to obtain green and renewable fuels such as hydrogen. The light-driven water splitting process (i.e., the photochemical decomposition of water into hydrogen and oxygen) is one of the most investigated strategies to achieve this goal. However, the water oxidation reaction still constitutes a formidable challenge because of its kinetic and thermodynamic requirements. Recent research efforts have been focused on the exploration of alternative and more favorable oxidation processes, such as the oxidation of organic substrates, to obtain value-added products in addition to solar fuels. In this mini-review, some of the most intriguing and recent results are presented. In particular, attention is directed on hybrid photoanodes comprising molecular light-absorbing moieties (sensitizers) and catalysts grafted onto either mesoporous semiconductors or conductors. Such systems have been exploited so far for the photoelectrochemical oxidation of alcohols to aldehydes in the presence of suitable co-catalysts. Challenges and future perspectives are also briefly discussed, with special focus on the application of such hybrid molecular-based systems to more challenging reactions, such as the activation of C–H bonds.

Aqueous Biphasic Dye‐Sensitized Photosynthesis Cells for TEMPO‐Based Oxidation of Glycerol

This work reports an aqueous dye‐sensitized photoelectrochemical cell (DSPEC) capable of oxidizing glycerol (an archetypical biobased compound) coupled with H₂ production. We employed a mesoporous TiO₂ photoanode sensitized with the high potential thienopyrroledione‐based dye AP11, encased in an acetonitrile‐based redox‐gel that protects the photoanode from degradation by aqueous electrolytes. The use of the gel creates a biphasic system with an interface at the organic (gel) electrode and aqueous anolyte. Embedded in the acetonitrile gel is 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), acting as both a redox‐mediator and a catalyst for oxidative transformations. Upon oxidation of TEMPO by the photoexcited dye, the in situ generated TEMPO⁺ shuttles through the gel to the acetonitrile–aqueous interface, where it acts as an oxidant for the selective conversion of glycerol to glyceraldehyde. The introduction of the redox‐gel layer affords a 10‐fold increase in the conversion of glycerol compared to the purely aqueous system. Our redox‐gel protected photoanode yielded a stable photocurrent over 48 hours of continuous operation, demonstrating that this DSPEC is compatible with alkaline aqueous reactions.

Photoelectrochemical Oxidation of Amines to Imines and Production of Hydrogen through Mo-Doped BiVO4 Photoanode

Imines are important multifunctional intermediates for the synthesis of pesticides, pharmaceuticals, biologics, and fine chemicals. The direct photoelectrochemical (PEC) oxidation of amines to imines is a highly selective, efficient, green, and gentle method. Interestingly, the constructive merging of the PEC oxidation of amines with the production of hydrogen can accelerate hydrogen evolution due to the less challenging oxidation of amines such as benzylamine (BN) in comparison to sluggish water oxidation. Herein, Mo-doped BiVO₄ photoanodes were prepared and first applied to simultaneously oxide benzylamine (BN) to N-benzylidenebenzylamine (BI) and produce hydrogen in a closed two-chamber, three-electrode PEC cell After illumination at a bias of 1.3 V vs SCE for 3 h, the 3% Mo-doped BiVO₄ photoanode achieved a maximum yield of ∼94 μmol h^-1 at a 1 × 1 cm² area with a BN to BI selectivity of almost 100% and a Faradaic efficiency of 98.4%. Our electrode presented enhanced photocorrosion resistance in acetonitrile solvent. Additionally, the PEC oxidations of benzylamine derivatives with different substituents (-F, -Cl, -Br, -CH₃, -OCH₃) to the corresponding imines were also investigated. The results indicated that the Mo-doped BiVO₄ photoanode exhibited an excellent performance in the oxidation of these benzylamine derivatives with corresponding amine to imine selectivities of almost 100% and Faradaic efficiencies of >95%.

Ni2P nanocrystals embedded Ni-MOF nanosheets supported on nickel foam as bifunctional electrocatalyst for urea electrolysis

It’s highly desired but challenging to synthesize self-supporting nanohybrid made of conductive nanoparticles with metal organic framework (MOF) materials for the application in the electrochemical field. In this work, we report the preparation of Ni₂P embedded Ni-MOF nanosheets supported on nickel foam through partial phosphidation (Ni₂P@Ni-MOF/NF). The self-supporting Ni₂P@Ni-MOF/NF was directly tested as electrode for urea electrolysis. When served as anode for urea oxidation reaction (UOR), it only demands 1.41 V (vs RHE) to deliver a current of 100 mA cm⁻². And the overpotential of Ni₂P@Ni-MOF/NF to reach 10 mA cm⁻² for hydrogen evolution reaction HER was only 66 mV, remarkably lower than Ni₂P/NF (133 mV). The exceptional electrochemical performance was attributed to the unique structure of Ni₂P@Ni-MOF and the well exposed surface of Ni₂P. Furthermore, the Ni₂P@Ni-MOF/NF demonstrated outstanding longevity for both HER and UOR. The electrolyzer constructed with Ni₂P@Ni-MOF/NF as bifunctional electrode can attain a current density of 100 mA cm⁻² at a cell voltage as low as 1.65 V. Our work provides new insights for prepare MOF based nanohydrid for electrochemical application.

Photoelectrochemical Oxidation in Ambient Conditions Using Earth-Abundant Hematite Anode: A Green Route for the Synthesis of Biobased Polymer Building Blocks

This study demonstrates the use of a photoelectrochemical device comprising earth-abundant hematite photoanode for the oxidation of 5-hydroxymethylfurfural (5-HMF), a versatile bio-based platform chemical, under ambient conditions in the presence of an electron mediator. The results obtained in this study showed that the hematite photoanode, upon doping with fluorine, can oxidize water even at lower pH (4.5 and 9.0). For 5-HMF oxidation, three different pH conditions were investigated, and complete oxidation to 2,5-furandicarboxylic acid (FDCA) via 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) was achieved at pH above 12. At lower pH, the oxidation followed another route via 2,5-diformylfuran (DFF), yielding 5-formyl-2-furancarboxylic acid (FFCA) as the main product. Using the oxidized intermediates as substrates showed DFF to be most efficiently oxidized to FDCA. We also show that, at pH 4.5, the addition of the laccase enzyme promoted the oxidation of 5-HMF to FFCA.

Molecular Triad Containing a TEMPO Catalyst Grafted on Mesoporous Indium Tin Oxide as a Photoelectrocatalytic Anode for Visible Light-Driven Alcohol Oxidation

Photoelectrochemical cells based on semiconductors are among the most studied methods of artificial photosynthesis. This study concerns the immobilization, on a mesoporous conducting indium tin oxide electrode (nano-ITO), of a molecular triad (NDADI-P-Ru-TEMPO) composed of a ruthenium tris-bipyridine complex (Ru) as photosensitizer, connected at one end to 2,2,6,6-tetramethyl-1-piperidine N-oxyl (TEMPO) as alcohol oxidation catalyst and at the other end to the electron acceptor naphthalenedicarboxyanhydride dicarboximide (NDADI). Light irradiation of NDADI-P-Ru-TEMPO grafted to nano-ITO in a pH 10 carbonate buffer effects selective oxidation of para-methoxybenzyl alcohol (MeO-BA) to para-methoxybenzaldehyde with a TON of approximately 150 after 1 h of photolysis at a bias of 0.4 V vs. SCE. The faradaic efficiency is found to be of 80±5 %. The photophysical study indicates that photoinduced electron transfer from the Ru complex to NDADI is a slow process and must compete with direct electron injection into ITO to have a better performing system. This work sheds light on some of the important ways to design more efficient molecular systems for the preparation of photoelectrocatalytic cells based on catalyst-dye-acceptor arrays immobilized on conducting electrodes.

First-Principles Evaluation of One-Dimensional Metal-Organic Frameworks for Electrocatalytic C-H Activation of Natural Gas

To replace the oxygen evolution reaction with thermodynamically more favorable and economically more profitable methane and ethane (the major components of natural gas) electrochemical partial oxidation, we employed constant electrode potential density functional theory calculations to screen 20 one-dimensional metal-organic frameworks containing heteroatom-substituted benzene as electrocatalysts. By computing the Pourbaix diagrams, O-H binding energies, and C-H activation barriers, we determined that although none of these catalysts were able to activate methane, one was able to hydroxylate ethane to ethanol with facile kinetics, making it a promising electrocatalyst for natural gas oxidation.

Recent catalytic routes for the preparation and the upgrading of biomass derived furfural and 5-hydroxymethylfurfural

Furans represent one of the most important classes of intermediates in the conversion of non-edible lignocellulosic biomass into bio-based chemicals and fuels. At present, bio-furan derivatives are generally obtained from cellulose and hemicellulose fractions of biomass via the acid-catalyzed dehydration of their relative C6-C5 sugars and then converted into a wide range of products. Furfural (FUR) and 5-hydroxymethylfurfural (HMF) are surely the most used furan-based feedstocks since their chemical structure allows the preparation of various high-value-added chemicals. Among several well-established catalytic approaches, hydrogenation and oxygenation processes have been efficiently adopted for upgrading furans; however, harsh reaction conditions are generally required. In this review, we aim to discuss the conversion of biomass derived FUR and HMF through unconventional (transfer hydrogenation, photocatalytic and electrocatalytic) catalytic processes promoted by heterogeneous catalytic systems. The reaction conditions adopted, the chemical nature and the physico-chemical properties of the most employed heterogeneous systems in enhancing the catalytic activity and in driving the selectivity to desired products are presented and compared. At the same time, the latest results in the production of FUR and HMF through novel environmental friendly processes starting from lignocellulose as well as from wastes and by-products obtained in the processing of biomass are also overviewed.

Improving the optical and thermoelectric properties of Cs2InAgCl6 with heavy substitutional doping: a DFT insight

The next-generation indium-based lead-free halide material Cs₂InAgCl₆ is promising for photovoltaic applications due to its good air stability and non-toxic behavior. However, its wide bandgap (>3 eV) is not suitable for the solar spectrum and hence reduces its photoelectronic efficiency for device applications. Here we report a significant bandgap reduction from 2.85 eV to 0.65 eV via substitutional doping and its effects on the optoelectronic and opto-thermoelectric properties from a first-principles study. The results predict that Sn/Pb and Ga and Cu co-doping will enhance the density of states significantly near the valence band maximum (VBM) and thus reduce the bandgap via shifting the VBM upward, while alkali metals (K/Rb) slightly increase the bandgap. A strong absorption peak near the Shockley–Queisser limit is observed in the co-doped case, while in the Sn/Pb-doped case, we notice a peak in the middle of the visible region of the solar spectrum. The nature of the bandgap is indirect with Cu–Ga/Pb/Sn doping, and a significant reduction in the bandgap, from 2.85 eV to 0.65 eV, is observed in the case of Ga–Cu co-doping. We observe a significant increase in the power factor (PF) (2.03 mW m⁻¹ K⁻²) for the n-type carrier after Pb-doping, which is ∼3.5 times higher than in the pristine case (0.6 mW m ⁻¹ K⁻²) at 500 K.

The next-generation indium-based lead-free halide material Cs₂InAgCl₆ is promising for photovoltaic applications due to its good air stability and non-toxic behavior while it shows good thermoelectric properties when doped with Pb.

Construction of self-supporting, hierarchically structured caterpillar-like NiCo2S4 arrays as an efficient trifunctional electrocatalyst for water and urea electrolysis

In this study, we have developed intriguing self-supporting caterpillar-like spinel NiCo2S4 arrays with a hierarchical structure of nanowires on a nanosheet skeleton, which can be used as a self-supporting trifunctional electrocatalyst for the oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and urea oxidation reaction (UOR). The caterpillar-like NiCo precursor arrays are first in situ grown on carbon cloth (NiCo2O4/CC) by a facile hydrothermal reaction, which is followed by an anion exchange process (or sulfuration treatment) with Na2S to form self-supporting spinel NiCo2S4 arrays (NiCo2S4/CC) with a roughened nanostructure. Taking advantage of the bimetallic synergistic effect, the unique hierarchical nanostructure, and the self-supporting nature, the resultant NiCo2S4/CC electrode exhibits high activities toward the OER, HER and UOR, which are highly superior to the monometallic counterparts of NiS nanosheets and Co9S8 nanowires on a carbon cloth substrate. The comparison of the three electrodes also indicates that the hierarchically structured bimetallic electrode combines the morphological and structural characteristics of monometallic Ni-based nanosheets and Co-based nanowires. When assembling a two-electrode electrolytic cell with NiCo2S4/CC as both the anode and cathode, an applied cell voltage of only 1.66 V is required to deliver a current density of 10 mA cm-2 in water electrolysis. By using the same two-electrode setup, the applied voltage for urea electrolysis is further reduced to 1.45 V that produces hydrogen at the cathode with the same current density. This study paves the way for exploring the feasibility of future less energy-intensive and large-scale hydrogen production.

Metformin-Templated Nanoporous ZnO and Covalent Organic Framework Heterojunction Photoanode for Photoelectrochemical Water Oxidation

Photoelectrochemical water-splitting offers unique opportunity in the utilization of abundant solar light energy and water resources to produce hydrogen (renewable energy) and oxygen (clean environment) in the presence of a semiconductor photoanode. Zinc oxide (ZnO), a wide bandgap semiconductor is found to crystallize predominantly in the hexagonal wurtzite phase. Herein, we first report a new crystalline triclinic phase of ZnO by using N-rich antidiabetic drug metformin as a template via hydrothermal synthesis with self-assembled nanorod-like particle morphology. We have fabricated a heterojunction nanocomposite charge carrier photoanode by coupling this porous ZnO with a covalent organic framework, which displayed highly enhanced photocurrent density of 0.62 mA/cm² at 0.2 V vs. RHE in photoelectrochemical water oxidation and excellent photon-to-current conversion efficiency at near-neutral pH vis-à-vis bulk ZnO. This enhancement of the photocurrent for the porous ZnO/COF nanocomposite material over the corresponding bulk ZnO could be attributed to the visible light energy absorption by COF and subsequent efficient charge-carrier mobility via porous ZnO surface.

Direct photoelectrochemical oxidation of hydroxymethylfurfural on tungsten trioxide photoanodes

An important target reaction for solar-powered biomass valorization is the conversion of 2,5-hydroxymethylfurfural (HMF) into key monomers for polyester production. Herein, photoanodes of WO3 are demonstrated to directly photo-oxidize HMF in aqueous electrolyte (pH 4) under simulated solar illumination. The addition of 5 mM HMF increases the saturation photocurrent by 26% and suppresses the water oxidation reaction, as determined by rotating ring-disk electrode experiments. Prolonged photoelectrochemical oxidation (64 h) illustrates system robustness and confirms the production of furandicarboxaldehyde (DFF), furandicarboxylic acid (FDCA), and related intermediates. Quantification of the reaction rate constants via a kinetic model gives insight into the modest DFF and FDCA yields (up to 4% and 1%, respectively)-which is due to the formation of by-products-and suggests routes for improvement.

Powering the next industrial revolution: transitioning from nonrenewable energy to solar fuels via CO2 reduction

Solar energy has been used for decades for the direct production of electricity in various industries and devices; however, harnessing and storing this energy in the form of chemical bonds has emerged as a promising alternative to fossil fuel combustion. The common feedstocks for producing such solar fuels are carbon dioxide and water, yet only the photoconversion of carbon dioxide presents the opportunity to generate liquid fuels capable of integrating into our existing infrastructure, while simultaneously removing atmospheric greenhouse gas pollution. This review presents recent advances in photochemical solar fuel production technology. Although efforts in this field have created an incredible number of methods to convert carbon dioxide into gaseous and liquid fuels, these can generally be classified under one of four categories based on how incident sunlight is utilised: solar concentration for thermoconversion (Category 1), transformation toward electroconversion (Category 2), natural photosynthesis for bioconversion (Category 3), and artificial photosynthesis for direct photoconversion (Category 4). Select examples of developments within each of these categories is presented, showing the state-of-the-art in the use of carbon dioxide as a suitable feedstock for solar fuel production.

Solar energy has been used for decades for the direct production of electricity in various industries and devices. However, harnessing and storing this energy in the form of chemical bonds has emerged as a promising alternative to fossil fuels.

Should All Electrochemical Energy Materials Be Isomaterially Heterostructured to Optimize Contra and Co-varying Physicochemical Properties?

Sustainable energy and chemical/material transformation constrained by limited greenhouse gas generation impose a grand challenge and posit outstanding opportunities to electrochemical material devices. Dramatic advancements in experimental and computational methodologies have captured detailed insights into the working of these material devices at a molecular scale and have brought to light some fundamental constraints that impose bounds on efficiency. We propose that the coupling of molecular events in the material device gives rise to contra-varying or co-varying properties and efficiency improving partial decoupling of such properties can be achieved via introducing engineered heterogeneities. A specific class of engineered heterogeneity is in the form of isomaterial heterostructures comprised of non-native and native polymorphs. The non-native polymorph differs from their native/ground state bulk polymorph in terms of its discrete translational symmetry and we anticipate specific symmetry relationships exist between non-native and native structures that enable the formation of interfaces that enhance efficiency. We present circumstantial evidence and provide speculative mechanisms for such an approach with the hope that a more comprehensive delineation of proposed material design will be undertaken.

Electrochemical Reactors for CO2 Conversion

Increasing risks from global warming impose an urgent need to develop technologically and economically feasible means to reduce CO2 content in the atmosphere. Carbon capture and utilization technologies and carbon markets have been established for this purpose. Electrocatalytic CO2 reduction reaction (CO2RR) presents a promising solution, fulfilling carbon-neutral goals and sustainable materials production. This review aims to elaborate on various components in CO2RR reactors and relevant industrial processing. First, major performance metrics are discussed, with requirements obtained from a techno-economic analysis. Detailed discussions then emphasize on (i) technical benefits and challenges regarding different reactor types, (ii) critical features in flow cell systems that enhance CO2 diffusion compared to conventional H-cells, (iii) electrolyte and its effect on liquid phase electrolyzers, (iv) catalysts for feasible products (carbon monoxide, formic acid and multi-carbons) and (v) strategies on flow channel and anode design as next steps. Finally, specific perspectives on CO2 feeds for the reactor and downstream purification techniques are annotated as part of the CO2RR industrial processing. Overall, we focus on the component and system aspects for the design of a CO2RR reactor, while pointing out challenges and opportunities to realize the ultimate goal of viable carbon capture and utilization technology.

Hydrogenation of ZnFe2O4 Flat Films: Effects of the Pre-Annealing Temperature on the Photoanodes Efficiency for Water Oxidation

The effects induced by post-synthesis hydrogenation on ZnFe2O4 flat films in terms of photoelectrochemical (PEC) performance of photoanodes for water oxidation have been deeply investigated as a function of the pre-annealing temperature of the materials. The structure and morphology of the films greatly affect the efficacy of the post synthesis treatment. In fact, highly compact films are obtained upon pre-annealing at high temperatures, and this limits the exposure of the material bulk to the reductive H2 atmosphere, making the treatment largely ineffective. On the other hand, a mild hydrogen treatment greatly enhances the separation of photoproduced charges in films pre-annealed at lower temperatures, as a result of the introduction of oxygen vacancies with n-type character. A comparison between present results and those obtained with ZnFe2O4 nanorods clearly demonstrates that specific structural and/or surface properties, together with the initial film morphology, differently affect the overall contribution of post-synthesis hydrogenation on the efficiency of zinc ferrite-based photoanodes.

Robust, Scalable Synthesis of the Bulky Hagfeldt Donor for Dye-Sensitized Solar Cells

The bulky triarylamine group commonly referred to as the "Hagfeldt donor" is a key building block found in many of the organic dyes used in dye-sensitized applications such as dye-sensitized solar cells (DSCs). This building block has gained popularity owing to its presence in many of the best-performing DSC devices reported to date, which use dyes containing this donor group. The Hagfeldt donor provides a desirable 3-dimensional structure that aids in surface protection of electrons injected into the semiconductor from oxidants in the electrolyte, allowing for record-setting cobalt- and copper-based redox shuttles to be utilized more frequently. However, the synthesis of this molecule has proven unreliable for many routes. This study concerns a novel, reliable and scalable five-step synthesis of the Hagfeldt donor.