Highly Selective and Solvent-Dependent Reduction of Nitrobenzene to N-Phenylhydroxylamine, Azoxybenzene, and Aniline Catalyzed by Phosphino-Modified Polymer Immobilized Ionic Liquid-Stabilized AuNPs

Electrolytic Conversion of Nitro Compounds into Amines in a Membrane Reactor

Aromatic and aliphatic amines are key intermediates in the synthesis of pharmaceuticals, dyes, and agrochemicals. These amines are often sourced from nitro compounds. The hydrogenation of nitro compounds into amines requires harsh reaction conditions (e.g., high pressures and high temperatures) or additives that are usually toxic. Here we demonstrate the electrochemically-driven hydrogenation of nitro compounds into amines in the hydrogenation compartment of a membrane reactor. The hydrogen is sourced from water in an adjacent electrolysis compartment separated by a hydrogen-permeable palladium membrane. Modifications of the palladium membrane with catalyst coatings enabled a wide range of commercially relevant nitro compounds to be hydrogenated into amines, without any additives, at ambient pressure and room temperature. This membrane reactor also enables nitro hydrogenation at high reagent concentrations with high functional group tolerance.

Selectivity Modulation of Multistep Reduction Reactions by Gold Nanoclusters

The selective synthesis of valuable azo- and azoxyaromatic chemicals via transfer coupling of nitroaromatic compounds has been achieved by fine-tuning the catalyst structure. Here, a direct method to modulate nitrobenzene reduction and selectively alter the product from azobenzene to azoxybenzene by employing the size effect of Au is reported. Au nanoclusters (NCs) with smaller sizes embedded in ZIF-8 controllably converted nitrobenzene into azoxybenzene, while supported Au nanoparticles (NPs) selectively catalyzed nitrobenzene reduction to azobenzene. X-ray photoelectron spectroscopy (XPS) and Diffuse reflectance infrared Fourier transform spectroscopy on CO adsorption (CO-DRIFTS) of Au NC/ZIF-8 revealed a higher valence state and a lower electron density of Au than that of Au NP/ZIF-8, combined with the desorption of azoxybenzene from the Au NC and Au NP surface, suggesting that the Au NCs with lower electron density exhibit stronger adsorption. Density functional theory (DFT) calculations and charge density difference maps indicated that azoxybenzene bonded to Au NC/ZIF-8 with greater adsorption energy, resulting in more electron transfer between azoxybenzene and the generated Au sites, which inhibited further reduction of azoxybenzene and resulted in high azoxybenzene selectivity. The application of the size effect of Au particles to regulate nitrobenzene transfer coupling provided new insights into the structure-selectivity relationships.

Catalytic Reduction of Aromatic Nitro Compounds to Phenylhydroxylamine and Its Derivatives

Phenylhydroxylamine and its derivates (PHAs) are important chemical intermediates. Phenylhydroxylamines are mainly produced via the catalytic reduction of aromatic nitro compounds. However, this catalytic reduction method prefers to generate thermodynamically stable aromatic amine. Thus, designing suitable catalytic systems, especially catalysts to selectively convert aromatic nitro compounds to PHAs, has received increasing attention but remains challenging. In this review, we initially provide a brief overview of the various strategies employed for the synthesis of PHAs, focusing on reducing aromatic nitro compounds. Subsequently, an in-depth analysis is presented on the catalytic reduction process, encompassing discussions on catalysts, reductants, hydrogen sources, and a comprehensive assessment of the merits and drawbacks of various catalytic systems. Furthermore, a concise overview is provided regarding the progress made in comprehending the mechanisms involved in this process of catalytic reduction of aromatic nitro compounds. Finally, the main challenges and prospects in PHAs' production via catalytic reduction are outlined.

Multi-functional imidazolium dendrimers based on thiacalix[4]arenes: self-assembly, catalysis and DNA binding

For the first time, dendrimers based on thiacalix[4]arenes bearing imidazolium dendrons on one side and alkyl fragments on another side of the macrocyclic platform and symmetrical dendrimers with four dendrons on both sides were synthesized. Dendrons consist of gallic acid-based branches functionalized with imidazolium and triazolium groups. The physicochemical properties of the dendrimers such as micellar concentration (CMC), size, and solubilization capacity were measured. Novel dendrimers exhibit high binding efficiency with calf thymus DNA (ctDNA) as revealed by fluorescence quenching of the DNA-EtBr complex in the presence of macrocycles. Dendrimers have been used as supports for Pd nanoparticles, which show high catalytic activity for the reduction of nitroaromatic compounds.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Solvent-free selective hydrogenation of nitroaromatics to azoxy compounds over Co single atoms decorated on Nb2O5 nanomeshes

The solvent-free selective hydrogenation of nitroaromatics to azoxy compounds is highly important, yet challenging. Herein, we report an efficient strategy to construct individually dispersed Co atoms decorated on niobium pentaoxide nanomeshes with unique geometric and electronic properties. The use of this supported Co single atom catalysts in the selective hydrogenation of nitrobenzene to azoxybenzene results in high catalytic activity and selectivity, with 99% selectivity and 99% conversion within 0.5 h. Remarkably, it delivers an exceptionally high turnover frequency of 40377 h-1, which is amongst similar state-of-the-art catalysts. In addition, it demonstrates remarkable recyclability, reaction scalability, and wide substrate scope. Density functional theory calculations reveal that the catalytic activity and selectivity are significantly promoted by the unique electronic properties and strong electronic metal-support interaction in Co1/Nb2O5. The absence of precious metals, toxic solvents, and reagents makes this catalyst more appealing for synthesizing azoxy compounds from nitroaromatics. Our findings suggest the great potential of this strategy to access single atom catalysts with boosted activity and selectivity, thus offering blueprints for the design of nanomaterials for organocatalysis.

Promoting Piezocatalytic H2 O2 Production in Pure Water by Loading Metal-Organic Cage-Modified Gold Nanoparticles on Graphitic Carbon Nitride

Piezocatalytic hydrogen peroxide (H2 O2 ) production is a green synthesis method, but the rapid complexation of charge carriers in piezocatalysts and the difficulty of adsorbing substrates limit its performance. Here, metal-organic cage-coated gold nanoparticles are anchored on graphitic carbon nitride (MOC-AuNP/g-C3 N4 ) via hydrogen bond to serve as the multifunctional sites for efficient H2 O2 production. Experiments and theoretical calculations prove that MOC-AuNP/g-C3 N4 simultaneously optimize three key parts of piezocatalytic H2 O2 production: i) the MOC component enhances substrate (O2 ) and product (H2 O2 ) adsorption via host-guest interaction and hinders the rapid decomposition of H2 O2 on MOC-AuNP/g-C3 N4 , ii) the AuNP component affords a strong interfacial electric field that significantly promotes the migration of electrons from g-C3 N4 for O2 reduction reaction (ORR), iii) holes are used for H2 O oxidation reaction (WOR) to produce O2 and H+ to further promote ORR. Thus, MOC-AuNP/g-C3 N4 can be used as an efficient piezocatalyst to generate H2 O2 at rates up to 120.21 μmol g-1  h-1 in air and pure water without using sacrificial agents. This work proposes a new strategy for efficient piezocatalytic H2 O2 synthesis by constructing multiple active sites in semiconductor catalysts via hydrogen bonding, by enhancing substrate adsorption, rapid separation of electron-hole pairs and preventing rapid decomposition of H2 O2 .

Recent Advances in the Synthesis of Aromatic Azo Compounds

Aromatic azo compounds have -N=N- double bonds as well as a larger π electron conjugation system, which endows aromatic azo compounds with wide applications in the fields of functional materials. The properties of aromatic azo compounds are closely related to the substituents on their aromatic rings. However, traditional synthesis methods, such as the coupling of diazo salts, have a significant limitation with respect to the structural design of aromatic azo compounds. Therefore, many scientists have devoted their efforts to developing new synthetic methods. Moreover, recent advances in the synthesis of aromatic azo compounds have led to improvements in the design and preparation of light-response materials at the molecular level. This review summarizes the important synthetic progress of aromatic azo compounds in recent years, with an emphasis on the pioneering contribution of functional nanomaterials to the field.

Synergistic effect of silver NPs immobilized on Fe3O4@L-proline magnetic nanocomposite toward the photocatalytic degradation of Victoria blue and reduction of organic pollutants

The surface of magnetite (Fe₃O₄) nanoparticles was subject to modification through the incorporation of L-proline (LP) by simple co-precipitation method in which silver nanoparticles were deposited by in situ method, thereby yielding the Fe₃O₄@LP-Ag nanocatalyst. The fabricated nanocatalyst was characterized using an array of techniques including Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), Brunauer-Emmett-Teller (BET), and UV-Vis spectroscopy. The results evince that the immobilization of LP on the Fe₃O₄ magnetic support facilitated the dispersion and stabilization of Ag NPs. The SPION@LP-Ag nanophotocatalyst exhibited exceptional catalytic efficiency facilitating the reduction of MO, MB, p-NP, p-NA, NB, and CR in the presence of NaBH₄. The rate constants obtained from the pseudo-first-order equation were 0.78, 0.41, 0.34, 0.27, 0.45, 0.44, and 0.34 min^-1 for CR, p-NP, NB, MB, MO, and p-NA, respectively. Additionally, the Langmuir-Hinshelwood model was deemed the most probable mechanism for catalytic reduction. The novelty of this study lies in the use of L-proline immobilized on Fe₃O₄ MNPs as a stabilizing agent for the in-situ deposition of silver nanoparticles, resulting in the synthesis of Fe₃O₄@LP-Ag nanocatalyst. This nanocatalyst exhibits high catalytic efficacy for the reduction of multiple organic pollutants and azo dyes, which can be attributed to the synergistic effects between the magnetic support and the catalytic activity of the silver nanoparticles. The easy recyclability and low cost of the Fe₃O₄@LP-Ag nanocatalyst further enhance its potential application in environmental remediation.

Structure engineering of CeO2 for boosting the Au/CeO2 nanocatalyst in the green and selective hydrogenation of nitrobenzene

Exploring eco-friendly and cost-effective strategies for structure engineering at the nanoscale is important for boosting heterogeneous catalysis but still under a long-standing challenge. Herein, multifunctional polyphenol tannic acid, a low-cost natural biomass containing catechol and galloyl species, was employed as a green reducing agent, chelating agent, and stabilizer to prepare Au nanoparticles, which were dispersed on different-shaped CeO₂ supports (e.g., rod, flower, cube, and octahedral). Systematic characterizations revealed that Au/CeO₂-rod had the highest oxygen vacancy density and Ce(III) proportion, favoring the dispersion and stabilization of the metal active sites. Using isopropanol as a hydrogen-transfer reagent, deep insights into the structure-activity relationship of the Au/CeO₂ catalysts with various morphologies of CeO₂ in the catalytic nitrobenzene transfer hydrogenation reaction were gained. Notably, the catalytic performance followed the order: Au/CeO₂-rod (110), (100), (111) > Au/CeO₂-flower (100), (111) > Au/CeO₂-cube (100) > Au/CeO₂-octa (111). Au/CeO₂-rod displayed the highest conversion of 100% nitrobenzene and excellent stability under optimal conditions. Moreover, DFT calculations indicated that nitrobenzene molecules had a suitable adsorption energy and better isopropanol dehydrogenation capacity on the Au/CeO₂ (110) surface. A reaction pathway and the synergistic catalytic mechanism for catalytic nitrobenzene transfer hydrogenation are proposed based on the results. This work demonstrates that CeO₂ structure engineering is an efficient strategy for fabricating advanced and environmentally benign materials for nitrobenzene hydrogenation.

Chitosan derived efficient and stable Pd nano-catalyst for high efficiency hydrogenation

The design and development of green and efficient supported catalysts is the frontier direction in the field of green synthesis, which conforms to the strategic concept of green sustainable chemistry and "carbon neutrality". Herein, we used a renewable resource chitosan (CS) derived from seafood wastes of chitin as carriers to design two different chitosan-supported palladium (Pd) nano-catalysts through different activation methods. The Pd particles were firmly and uniformly dispersed on the chitosan microspheres due to the interconnected nanoporous structure and functional groups of chitosan, proved by diverse characterizations. The chitosan supported catalysts (Pd@CS) was applied to hydrogenation of 4-nitrophenol, which showed competitive catalytic activity compared to commercial Pd/C, un-supported nano-Pd and Pd(OAc)₂ catalysts, as well as excellent catalytic activity, good reusability, long-life and broad applicability in selective hydrogenation of aromatic aldehydes, suggesting potential of applications in green industrial catalysis.

An Efficient Continuous Flow Synthesis for the Preparation of N-Arylhydroxylamines: Via a DMAP-Mediated Hydrogenation Process

The selective hydrogenation of nitroarenes to N-arylhydroxylamines is an important synthetic process in the chemical industry. It is commonly accomplished by using heterogeneous catalytic systems that contain inhibitors, such as DMSO. Herein, DMAP has been identified as a unique additive for increasing hydrogenation activity and product selectivity (up to >99%) under mild conditions in the Pt/C-catalyzed process. Continuous-flow technology has been explored as an efficient approach toward achieving the selective hydrogenation of nitroarenes to N-arylhydroxylamines. The present flow protocol was applied for a vast substrate scope and was found to be compatible with a wide range of functional groups, such as electron-donating groups, carbonyl, and various halogens. Further studies were attempted to show that the improvement in the catalytic activity and selectivity benefited from the dual functions of DMAP; namely, the heterolytic H2 cleavage and competitive adsorption.

Photo-induced redox cascade reaction of nitroarenes and amines

A photo-induced redox cascade reaction has been developed for the chemoselective construction of isoxazolidine derivatives from stable and easily available nitroarenes and amines.

Understanding the electrocatalytic mechanism of self-template formation of hierarchical Co9S8/Ni3S2 heterojunctions for highly selective electroreduction of nitrobenzene

Aqueous electrochemical nitroarene reduction reaction using H₂O as the sustainable hydrogen source is an emerging technology to produce functionalized anilines. However, the development of low-cost electrocatalysts and the fundamental mechanistic understanding of the selective NO-RR still remain challenging. Herein, self-supporting hierarchical nanosheets consisting of high-density Co₉S₈/Ni₃S₂ heterojunctions on Ni foam (Co₉S₈/Ni₃S₂-NF) are constructed via an in situ self-template strategy. With combined advantages of high-loading, high surface exposure, efficient conductivity and unique electronic structure of the Co₉S₈/Ni₃S₂ interface, the as-prepared Co₉S₈/Ni₃S₂-NF exhibits efficient electrocatalytic NO-RR performance, including up to 99.0% conversion and 96.0% selectivity towards aniline, and outstanding functional group tolerance. Mechanistic investigations and theoretical calculations reveal that electron transfer from Ni₃S₂ to Co₉S₈ is beneficial for the co-adsorption of H₂O and nitrobenzene molecules at the interfacial sites, promoting the formation of active hydrogen and subsequent reduction of nitrobenzene. Additionally, the interfacial charge transfer breaks the symmetry of two active Co sites at the Co₉S₈/Ni₃S₂ interface, which markedly reduces the energy barrier for reduction of nitrobenzene to aniline. This work offers a successful example for the interfacial engineering of metal sulfide-based heterojunctions with excellent electrocatalytic nitroarene reduction performance, and also paves the way for the in-depth understanding of the corresponding mechanism.

Facile fabrication of highly dispersed Pd catalyst on nanoporous chitosan and its application in environmental catalysis

With the development of society, the problem of environmental pollution is becoming increasingly serious, such as the typical pollution of nitro compounds or dyes in wastewater. An effective strategy to remove these organic pollutants is catalytic conversion, including converting them into more chemically valuable compounds. Herein, a nanoporous chitosan microsphere derived from seafood waste resources of chitin was constructed via sol-gel method, which was used as supports to successfully fabricate a highly dispersed Pd nano-catalyst (mean diameter ~ 1.8 nm) via a facile way based on its interconnected nanoporous structure and rich functional -OH/-NH₂ groups. The synthetic catalyst was applied to the hydrogenation of toxic nitro compounds, which could efficiently and selectively catalyze the conversion of nitro compounds. The catalyst was also used for the degradation of some representative dyes, which also showed good activity and stability, suggesting potential of applications in green environmental governance.

Modifying electron injection kinetics for selective photoreduction of nitroarenes into cyclic and asymmetric azo compounds

Modifying the reactivity of substrates by encapsulation is essential for microenvironment catalysts. Herein, we report an alternative strategy that modifies the entry behaviour of reactants into the microenvironment and substrate inclusion thermodynamics related to the capsule to control the electron injection kinetics and the selectivity of products from the nitroarenes photoreduction. The strategy includes the orchestration of capsule openings to control the electron injection kinetics of electron donors, and the capsule’s pocket to encapsulate more than one nitroarene molecules, facilitating a condensation reaction between the in situ formed azanol and nitroso species to produce azo product. The conceptual microenvironment catalyst endows selective conversion of asymmetric azo products from different nitroarenes, wherein, the estimated diameter and inclusion Gibbs free energy of substrates are used to control and predict the selectivity of products. Inhibition experiments confirm a typical enzymatic conversion, paving a new avenue for rational design of photocatalysts toward green chemistry.

Designing a Polyoxometalate-Incorporated Metal-Organic Framework for Reduction of Nitroarenes to Anilines by Sequential Proton-Coupled Electron Transfers

Developing new photocatalysts for reduction of nitroarenes to anilines under mild conditions is very significant. Herein, a new polyoxometalate-based metal-organic framework (POMOF), {[Co(H₂O)]₂[Co₂(H₂O)₆(TPT)][Co(TPT)PW₁₁O₃₉]}·3H₂O·TPT (namely, CoW-TPT, TPT = 2,4,6-tri(4-pyridyl)-1,3,5-triazine), was prepared by incorporating Co(II)-substituted Keggin-type anions [PCoW₁₁O₃₉]^5- and a photosensitizer (TPT) into a framework. In this structure, the direct coordination bond between [PCoW₁₁O₃₉]^5- and TPT ligand and π···π interactions between TPT molecules are beneficial for the separation and migration of photogenerated carriers, thus improving the photocatalytic activity of CoW-TPT. The combination of both photosensitizer TPT and the electron-storable component [PCoW₁₁O₃₉]^5- in a cooperative photocatalysis fashion is conducive to the photocatalytic multielectron reduction of nitroarenes. CoW-TPT provided a high conversion of 94.71% in the photocatalytic reduction of nitroarenes to anilines utilizing triethanolamine as the proton source and electron donor by sequential proton-coupled electron transfers.

Catalytic selective oxidation of aromatic amines to azoxy derivatives with an ultralow loading of peroxoniobate salts

Tartaric acid-coordinated peroxoniobate salts demonstrate an exceptionally high TOF value (up to 4435 h−1) even at an ultralow catalyst loading for the oxidation of aromatic amines to azoxy compounds under green and very mild conditions.

Highly efficient and selective aqueous phase hydrogenation of aryl ketones, aldehydes, furfural and levulinic acid and its ethyl ester catalyzed by phosphine oxide-decorated polymer immobilized ionic liquid-stabilized ruthenium nanoparticles

Phosphine oxide-decorated polymer immobilized ionic liquid stabilized RuNPs catalyse the hydrogenation of aryl ketones with remarkable selectivity for the CO bond, complete hydrogenation to the cyclohexylalcohol and hydrogenation of levulinic acid to γ-valerolactone.

Photocatalytic hydrogenation of nitrobenzene to aniline over titanium(iv) oxide using various saccharides instead of hydrogen gas

Bare TiO₂ photocatalyst almost quantitatively converted nitrobenzene to aniline with various saccharides without the use of hydrogen gas. Although aniline was formed when any saccharide was used, the use of disaccharides (lactose, maltose, and sucrose) decreased the reaction rate. The rate of photocatalytic hydrogenation of nitrobenzene using saccharides is determined by the degradation rate of saccharides at positive holes. When glucose was used, formic acid, arabinose, glyceraldehyde and lactic acid were obtained, which are products that are consistent with the product of the photocatalytic oxidation of glucose.

10 kinds of saccharides were investigated as hydrogen source in photocatalytic hydrogenation of nitrobenzene to aniline.

Nitration of aromatics with dinitrogen pentoxide in a liquefied 1,1,1,2-tetrafluoroethane medium

Regardless of the sustainable development path, today, there are highly demanded chemical productions still operating that bear environmental and technological risks inherited from the previous century. The fabrication of nitro compounds, and nitroarenes in particular, is traditionally associated with acidic wastes formed in nitration reactions exploiting mixed acids. However, nitroarenes are indispensable for industrial and military applications. We faced the challenge and developed a greener, safer, and yet effective method for the production of nitroaromatics. The proposed approach comprises the application of an eco-friendly nitrating agent, namely dinitrogen pentoxide (DNP), in the medium of liquefied 1,1,1,2-tetrafluoroethane (TFE) – one of the most non-hazardous Freons. Importantly, the used TFE is not emitted into the atmosphere but is effortlessly recondensed and returned into the process. DNP is obtained via the oxidation of dinitrogen tetroxide with ozone. The elaborated method is characterized by high yields of the targeted nitro arenes, mild reaction conditions, and minimal amount of easy-to-utilize wastes.

A green, safe, and economical method for the production of nitroaromatics is developed. The method comprises the use of the eco-friendly nitrating agent, dinitrogen pentoxide, and liquefied 1,1,1,2-tetrafluoroethane as the reusable reaction medium.

A bioinspired nitrone precursor to a stabilized nitroxide radical

Nitrones derived from natural antioxidants are emerging as highly specific therapeutics against various human diseases, including stroke, neurodegenerative pathologies, and cancer. However, the development of useful pseudo-natural nitrones requires the judicious choice of a secondary metabolite as the precursor. Betalains are nitrogen-containing natural pigments that exhibit marked antioxidant capacity and pharmacological properties and, hence, are ideal candidates for designing multifunctional nitrones. In this work, we describe the semisynthesis and properties of a biocompatible and antioxidant betalain-nitrone called OxiBeet. This bio-based compound is a better radical scavenger than ascorbic acid, gallic acid, and most non-phenolic antioxidants and undergoes concerted proton-coupled electron transfer. The autoxidation of OxiBeet produces a persistent nitroxide radical, which, herein, is studied via electron paramagnetic resonance spectroscopy. In addition, femtosecond transient absorption spectroscopy reveals that excited state formation is not required for the oxidation of OxiBeet. The results are compared with those obtained using betanin, a natural betalain, and pBeet, the imine analog of OxiBeet. The findings of this study will enable the development of antioxidant and spin-trap nitrones based on the novel N-oxide 1,7-diazaheptamethinium scaffold and betalain dyes with enhanced hydrolytic stability in aqueous alkaline media.

Insights into the Interfacial Effects in Heterogeneous Metal Nanocatalysts toward Selective Hydrogenation

Heterogeneous metal catalysts are distinguished by their structure inhomogeneity and complexity. The chameleonic nature of heterogeneous metal catalysts have prevented us from deeply understanding their catalytic mechanisms at the molecular level and thus developing industrial catalysts with perfect catalytic selectivity toward desired products. This Perspective aims to summarize recent research advances in deciphering complicated interfacial effects in heterogeneous hydrogenation metal nanocatalysts toward the design of practical heterogeneous catalysts with clear catalytic mechanism and thus nearly perfect selectivity. The molecular insights on how the three key components (i.e., catalytic metal, support, and ligand modifier) of a heterogeneous metal nanocatalyst induce effective interfaces determining the hydrogenation activity and selectivity are provided. The interfaces influence not only the H₂ activation pathway but also the interaction of substrates to be hydrogenated with catalytic metal surface and thus the hydrogen transfer process. As for alloy nanocatalysts, together with the electronic and geometric ensemble effects, spillover hydrogenation occurring on catalytically "inert" metal by utilizing hydrogen atom spillover from active metal is highlighted. The metal-support interface effects are then discussed with emphasis on the molecular involvement of ligands located at the metal-support interface as well as cationic species from the support in hydrogenation. The mechanisms of how organic modifiers, with the ability to induce both 3D steric and electronic effects, on metal nanocatalysts manipulate the hydrogenation pathways are demonstrated. A brief summary is finally provided together with a perspective on the development of enzyme-like heterogeneous hydrogenation metal catalysts.

Influencing the Electron Density of Nanosized Au Colloids via Immobilization on MgO to Stimulate Surface Reaction Activities

Heterogenization of colloidal gold on MgO is demonstrated to facilitate its catalytic surface reactivity. We show that the electron density on Au influenced by its immobilization on MgO along with the ensued metal-support interaction is one of the key parameters to obtain high activity. As elucidated by X-ray absorption spectroscopic (X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure) studies, the presence of well-dispersed nanosized Au on MgO is observed to result in an enhancement in the electron density of Au. The consequence of this electron-rich gold on the catalytic activity is then investigated using the nitroarene reduction as a model reaction with a detailed kinetic study. The kinetic study is an attempt to use a true heterogeneous system rather than the usually studied quasi-homogeneous systems. The results obtained reveal that the Au/MgO catalyst has a surface rate constant of ∼1.39 × 10^-3 mol m^-2 s^-1, which is significantly higher than those of the reported catalysts. While it validates the higher catalytic activity with a TOF of 9456 h^-1 observed for Au/MgO, the increased adsorption constant for 4-nitrophenol on Au/MgO further reflects the efficacy of MgO as the support. This not only allows effective heterogenization of the Au nanoparticles keeping the catalyst stable under the reaction conditions and being reused several times but also renders a capability in reduction of other nitro group-containing substrates. Therefore, the results are believed to be of importance in designing heterogeneous catalysts utilizing the distinctive properties of the nanosized colloids and tuning their surface reactivity as well.

Selective Photoinduced Reduction of Nitroarenes to N-Arylhydroxylamines

We report the selective photoinduced reduction of nitroarenes to N-arylhydroxylamines. The present methodology facilitates this transformation in the absence of catalyst or additives and uses only light and methylhydrazine. This noncatalytic photoinduced transformation proceeds with a broad scope, excellent functional-group tolerance, and high yields. The potential of this protocol reflects on the selective and straightforward conversion of two general antibiotics, azomycin and chloramphenicol, to the bioactive hydroxylamine species.

Highly Active Hydrogenation Catalysts Based on Pd Nanoparticles Dispersed along Hierarchical Porous Silica Covered with Polydopamine as Interfacial Glue

New catalysts based on Pd(0) nanoparticles (Pd NPs) on a bimodal porous silica of the UVM-7/polydopamine (PDA) support have been synthesized following two preparative strategies based on the sequential or joint incorporation of two components of the composite (Pd and PDA). We analyzed the role played by the PDA as ‘interfacial glue’ between the silica scaffold and the Pd NPs. The catalysts were tested for the hydrogenation of 4-nitrophenol using (NEt4)BH4 as the hydrogenating agent. In addition to the palladium content, the characterization of the catalysts at the micro and nanoscale has highlighted the importance of different parameters, such as the size and dispersion of the Pd NPs, as well as their accessibility to the substrate (greater or lesser depending on their entrapment level in the PDA) on the catalytic efficiency. Staged sequential synthesis has led to better catalytic results. The most active Pd(0) centers seem to be Pd NPs of less than 1 nm on the PDA surface. The efficiency of the catalysts obtained is superior to that of similar materials without PDA. A comprehensive comparison has been made with other catalysts based on Pd NPs in a wide variety of supports. The TOF values achieved are among the best described in the literature.

Highly Selective Synthesis of Hydrazoarenes from Nitroarenes via Polystyrene-Supported Au-Nanoparticle-Catalyzed Reduction: Application to Azoarenes, Aminoarenes, and 4,4'-Diaminobiaryls

A selective synthesis of hydrazoarene from nitroarene and its application are reported. Using polystyrene (PS) resins as solid supports for Au nanoparticles (AuNPs), polystyrene-supported Au nanoparticles (AuNPs@PS) were synthesized and characterized. In the presence of AuNPs@PS (1.0 mol %) as a catalyst, nitroarenes afforded corresponding hydrazoarenes (up to 99%) with high selectivity (up to 100%) under mild reaction conditions (NaBH₄, 50% aq. EtOH, and room temperature). Depending on the reaction conditions (the amount of NaBH₄, the substituent of nitroarenes, and the sequential addition of HCl), nitroarenes were converted to corresponding azoarenes (up to 95%), aminoarenes (up to 99%), and 4,4'-diaminobiaryls (up to 99%). Our easily recyclable catalytic system using a solid-phase reaction vessel provides an attractive synthetic method in an eco-friendly and sustainable manner.

A layered aluminum-based metal-organic framework as a superior trap for nitrobenzene capture via an intercalation role

Layered materials with porous layers are of great interest due to their intriguing structural topologies and potential applications as new adsorbents. In this study, a layered aluminum-based metal-organic framework, i.e. Al-TCPP, was successfully synthesized via a facile method for the adsorptive removal of nitrobenzene (NB). The as-synthesized Al-TCPP exhibited a typical layered structure and can be stable in water at pH = 5-7. Batch experimental results showed a superior adsorption performance towards NB with a maximum adsorption capability of 1.85 mg mg^-1, and an exceptionally rapid equilibrium within 1 min, yielding an overall adsorptive performance superior to the state-of-the-art NB adsorbents reported so far. The morphology and crystallinity of the Al-TCPP adsorbent basically retain the original status after the capture of NB. Importantly, X-ray diffraction patterns of the samples after the NB adsorption revealed that the possible NB intercalation took place in layered Al-TCPP and expanded the interlayer space during the adsorption, which greatly enriched the adsorption sites and thus achieved the outstanding performance. This work highlights new prospects in designing layered materials for use in environmental remediation.

Hollow and Yolk-Shell Co-N-C@SiO2 Nanoreactors: Controllable Synthesis with High Selectivity and Activity for Nitroarene Hydrogenation

The use of hollow and yolk-shell nanocomposites is an effective route to enhance catalytic performance. A strategy that allows precise control of the nanocomposites was developed to synthesize novel hollow and yolk-shell SiO₂ nanoreactors of Co-N-C@SiO₂, which used ZIF-67 as the hard template and also as the source for active sites. A size dependence of the nanoreactor structure was observed. Large size of ZIF-67 gave yolk-shell Y-Co-N-C@SiO₂ while small size of crystals gave hollow H-Co-N-C@SiO₂. The hydrogenation reaction results showed that the Co-N-C@SiO₂ catalyst exhibited a high selectivity (>99%) to aniline and gave an activity (35.3 h^-1) ∼3.3 times higher than that of Co/SiO₂ (11.8 h^-1). The excellent performance was attributed to that Co nanoparticles were doped in the N-C framework where they formed Co-N_x species and that the HSN had a void structure that had a reduced diffusion limitation.

Gold nanoparticles stabilized by PEG-tagged imidazolium salts as recyclable catalysts for the synthesis of propargylamines and the cycloisomerization of γ-alkynoic acids

Water-soluble gold nanoparticles prepared in the presence of PEG-tagged tris-imidazolium bromide, containing Au(0) and Au(i) species, are reusable catalysts.

Pd nanoparticles stabilized with phosphine-functionalized porous ionic polymer for efficient catalytic hydrogenation of nitroarenes in water

Small palladium nanoparticles stabilized with phosphine-functionalized PIP displayed high catalytic activity for nitroarenes hydrogenation. Nano-size Pd particles, electron-donation effect of phosphine ligand, and surface wettability account for its excellent catalytic performance.

Differences in the selective reduction mechanism of 4-nitroacetophenone catalysed by rutile- and anatase-supported ruthenium catalysts

Ru nanoparticles supported on different crystalline TiO₂(anatase and rutile) phases result in different reaction pathways for 4-nitroacetophenone.

Poly(vinylbenzyl chloride-co-divinyl benzene) polyHIPE monolith-supported o-hydroxynaphthaldehyde propylenediamine Schiff base ligand complex of copper(ii) ions as a catalyst for the epoxidation of cyclohexene

Poly(vinylbenzyl chloride-co-divinyl benzene)-based polyHIPE monoliths of different porosities were prepared using high-internal-phase emulsions (HIPEs) containing a fixed amount of vinylbenzyl chloride (VBC, 6.0 g, 0.0393 mol) and divinyl benzene (DVB 4.0 g, 0.0308 mol) as the oil phase and different volume ratios of aqueous calcium chloride as the internal phase. Span-80 (2.0 g (4.67 mmol))-stabilized HIPEs were polymerized at 60 °C using potassium persulfate (0.4 g, 1.48 mmol) as the initiator. Upon varying the volume ratio of aqueous calcium chloride from 80 to 90%, the prepared polyHIPE monoliths have shown significant variations in their surface morphology, specific surface area (SA), and pore volumes (V p) as confirmed by scanning electron microscopy (SEM) and a gas adsorption (BET) method. The prepared polyHIPE monoliths were anchored with o-hydroxynaphthaldehyde propylenediamine Schiff base ligand (HNPn) and then loaded with copper(ii) ions (HNPn-Cu) to act as a catalyst. The structural information of unsupported HNPn-Cu complexes was obtained by recording its FT-IR and UV-visible spectra. The amount of copper(ii) ions loaded onto HNPn ligand-anchored polyHIPE monoliths was determined by atomic absorption spectroscopic analysis. In comparison to unsupported HNPn-Cu catalyst, the polyHIPE monolith-supported HNPn-Cu catalyst has shown high catalytic activity (66.8%), product selectivity for epoxycyclohexane (ECH) (94.8%), high turn over number (0.028 mol mol-1 h-1) and low energy of activation (22.4 kJ mol-1) in the epoxidation of cyclohexene in the presence of hydrogen peroxide (H2O2) as an oxidant at 40 °C. The polyHIPE-supported HNPn-Cu catalyst also shows high reuse applications. Studies show that there is sufficient scope to develop polyHIPE monoliths with various properties for specific applications.