Spontaneous Delithiation under Operando Condition Triggers Formation of an Amorphous Active Layer in Spinel Cobalt Oxides Electrocatalyst toward Oxygen Evolution

Unleashing the potential of Li-O2 batteries with electronic modulation and lattice strain in pre-lithiated electrocatalysts

Efficient catalysts are indispensable for overcoming the sluggish reaction kinetics and high overpotentials inherent in Li-O2 batteries. However, the lack of precise control over catalyst structures at the atomic level and limited understanding of the underlying catalytic mechanisms pose significant challenges to advancing catalyst technology. In this study, we propose the concept of precisely controlled pre-lithiated electrocatalysts, drawing inspiration from lithium electrochemistry. Our results demonstrate that Li+ intercalation induces lattice strain in RuO2 and modulates its electronic structure. These modifications promote electron transfer between catalysts and reaction intermediates, optimizing the adsorption behavior of Li-O intermediates. As a result, Li-O2 batteries employing Li0.52RuO2 exhibit ultrahigh energy efficiency, long lifespan, high discharge capacity, and excellent rate performance. This research offers valuable insights for the design and optimization of efficient electrocatalysts at the atomic level, paving the way for further advancements in Li-O2 battery technology.

Recycling Spent Ternary Cathodes to Oxygen Evolution Catalysts for Pure Water Anion-Exchange Membrane Electrolysis

Recycling spent lithium-ion batteries (LIBs) to efficient water-splitting electrocatalysts is a promising and sustainable technology route for green hydrogen production by renewables. In this work, a fluorinated ternary metal oxide (F-TMO) derived from spent LIBs was successfully converted to a robust water oxidation catalyst for pure water electrolysis by utilizing an anion-exchange membrane. The optimized catalyst delivered a high current density of 3.0 A cm-2 at only 2.56 V and a durability of >300 h at 0.5 A cm-2, surpassing the noble-metal IrO2 catalyst. Such excellent performance benefits from an artificially endowed interface layer on the F-TMO, which renders the exposure of active metal (oxy)hydroxide sites with a stabilized configuration during pure water operation. Compared to other metal oxides (i.e., NiO, Co3O4, MnO2), F-TMO possesses a higher stability number of 2.4 × 106, indicating its strong potential for industrial applications. This work provides a feasible way of recycling waste LIBs to valuable electrocatalysts.

Highly efficient anion exchange membrane water electrolyzers via chromium-doped amorphous electrocatalysts

In-depth comprehension and modulation of the electronic structure of the active metal sites is crucial to enhance their intrinsic activity of electrocatalytic oxygen evolution reaction (OER) toward anion exchange membrane water electrolyzers (AEMWEs). Here, we elaborate a series of amorphous metal oxide catalysts (FeCrOx, CoCrOx and NiCrOx) with high performance AEMWEs by high-valent chromium dopant. We discover that the positive effect of the transition from low to high valence of the Co site on the adsorption energy of the intermediate and the lower oxidation barrier is the key factor for its increased activity by synchrotron radiation in-situ techniques. Particularly, the CoCrOx anode catalyst achieves the high current density of 1.5 A cm-2 at 2.1 V and maintains for over 120 h with attenuation less than 4.9 mV h-1 in AEMWE testing. Such exceptional performance demonstrates a promising prospect for industrial application and providing general guidelines for the design of high-efficiency AEMWEs systems.

Recycling the Spent LiNi1- x - yMnxCoyO2 Cathodes for High-Performance Electrocatalysts toward Both the Oxygen Catalytic and Methanol Oxidation Reactions

The traditional recycling methods of the spent lithium ion batteries (LIBs) involve the intricate and cumbersome steps. This work proposes a facile method of acid leaching followed by the sulfurization treatment to achieve the high Li leaching efficiency, and obtain high-performance multi-function electrocatalysts for oxygen reduction (ORR), oxygen evolution (OER), and methanol oxidation reactions (MOR) from the spent LIB ternary cathodes. By this method, the Li leaching efficiency from the spent LIB ternary cathode can reach 98.3%, and the transition metal sulfide heterostructures (LNMCO-H-450S) consisting MnS, NiS2, and NiCo2S4 phases can be obtained. LNMCO-H-450S shows the superior bifunctional oxygen catalytic activities with ORR half-wave potential of 0.763 V and OER potential at 10 mA cm-2 of 1.561 V, surpassing most of the state-of-the-art electrocatalysts. LNMCO-H-450S also demonstrates the superior MOR catalytic activity with the potential at 100 mA cm-2 being 1.37 V. Using LNMCO-H-450S as the oxygen catalyst, this work can construct the aqueous and solid-state zinc-air batteries with high power density of 309 and 257 mW cm-2, respectively. This work provides a promising strategy for the efficient recovery of Li, and reutilization of Ni, Co, and Mn from the spent LIB ternary cathodes.

Layered transition metal oxides (LTMO) for oxygen evolution reactions and aqueous Li-ion batteries

This perspective paper comprehensively explores recent electrochemical studies on layered transition metal oxides (LTMO) in aqueous media and specifically encompasses two topics: catalysis of the oxygen evolution reaction (OER) and cathodes of aqueous lithium-ion batteries (LiBs). They involve conflicting requirements; OER catalysts aim to facilitate water dissociation, while for cathodes in aqueous LiBs it is essential to suppress water dissociation. The interfacial reactions taking place at the LTMO in these two distinct systems are of particular significance. We show various strategies for designing LTMO materials for each desired aim based on an in-depth understanding of electrochemical interfacial reactions. This paper sheds light on how regulating the LTMO interface can contribute to efficient water splitting and economical energy storage, all with a single material.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Formation and Stabilization of NiOOH by Introducing α-FeOOH in LDH: Composite Electrocatalyst for Oxygen Evolution and Urea Oxidation Reactions

NiOOH is considered as the most active intermediate during electrochemical oxidation reaction, however, it is hard to directly synthesize due to high oxidation energy. Herein, theoretical calculations predict that α-FeOOH enables a decline in formation energy and an improvement in stabilization of NiOOH in NiFe-based layered double hydroxide (LDH). Inspiringly, a composite composed of α-FeOOH and LDH is well-designed and successfully fabricated in hydrothermal treatment by adding extra Fe³⁺ resource, and stable NiOOH is obtained by the following electro-oxidation method. Benefiting from strong electron-capturing capability of α-FeOOH, it efficiently promotes charge redistribution around the Ni/Fe sites and activates Ni atoms of LDH, verified by X-ray photoelectron spectra (XPS) and X-ray absorption spectra (XAS). The d-band center is optimized that balances the absorption and desorption energy, and thus Gibbs free energy barrier is lowered dramatically toward oxygen evolution reaction (OER) and urea oxidation reaction (UOR), and finally showing an outstanding overpotential of 195 mV and a potential of 1.35 V at 10 mA cm^-2 , respectively. This study provides a novel strategy to construct highly efficient catalysts via the introduction of a new phase for complex multiple-electron reactions.

Engineering the Structural Defects of Spinel Oxide Nanoneedles by Doping of V for a Highly Efficient Oxygen Evolution Reaction

Rational design of multi-structural defects in the transition-metal oxides is a very alluring and challenging strategy to significantly improve its oxygen evolution reaction (OER) performance. Herein, a simple and promising element doping approach is demonstrated to fabricate a poor-crystalline V-doping CuCo2O4 (V-CuCo2O4) nanoneedle with rich oxygen vacancies (Vo), partially amorphous phase, and Co2+ defects on the carbon fiber (CF) (V-CuCo2O4/CF). The results indicate that the V doping could further weaken the crystallinity of V-CuCo2O4, providing the thoroughfares for the convenience of electrolyte penetration and the exposure of active sites. Meanwhile, [CoO6] octahedron in the V-CuCo2O4 lattice is gravely distorted due to a strong electronic interaction between the doped V and Co atoms, creating more Co2+ active species. With the merits of these multiple structural defects, V-CuCo2O4/CF exhibits rich active sites, and its intrinsically electrocatalytic activity is significantly enhanced. The optimized V-CuCo2O4/CF electrocatalyst has a significantly enhanced OER activity with a required low overpotential of ∼204 and ∼246 mV at a current density of 100 and 300 mA cm-2, respectively, a small Tafel slope of 40.7 mV dec-1, and excellent stability in an alkaline medium. Furthermore, the results from the projected partial density of states calculation not only demonstrate that the 3-fol-coordinated Co near Vo bonded with Cu and V sites (Cu-Co(surf-Vo)-V) exhibits an enhanced electronic transfer activity but also reveal that the doped V could protect the Co sites from the deactivation by intermediates overbinding on the V sites. This work provides new insights into structure engineering of spinel phase copper cobaltite, resulting in significantly boosting electrocatalytic OER activity.

In Situ/Operando Soft X-ray Spectroscopic Identification of a Co4+ Intermediate in the Oxygen Evolution Reaction of Defective Co3O4 Nanosheets

Defect engineering is an important means of improving the electrochemical performance of the Co₃O₄ electrocatalyst in the oxygen evolution reaction (OER). In this study, operando soft X-ray absorption spectroscopy (SXAS) is used to explore the electronic structure of Co₃O₄ under OER for the first time. The defect-rich Co₃O₄ (D-Co₃O₄) has a Co^2.45+ state with Co²⁺ at both octahedral (O_h) and tetrahedral (T_d) sites and Co³⁺ at O_h, whereas Co₃O₄ has Co^2.6+ with Co²⁺ and Co³⁺ at T_d and O_h sites, respectively. SXAS reveals that upon increasing the voltage, the Co²⁺ in D-Co₃O₄ is converted to low-spin Co³⁺, some of which is further converted to low-spin Co⁴⁺; most Co²⁺ in Co₃O₄ is converted to Co³⁺ but rarely to Co⁴⁺. When the voltage is switched off, Co⁴⁺ intermediates quickly disappear. These findings reveal Co(O_h) in D-Co₃O₄ can be rapidly converted to active low-spin Co⁴⁺ under operando conditions, which cannot be observed by ex situ XAS.

Recycling spent LiNi1-x-yMnxCoyO2 cathodes to bifunctional NiMnCo catalysts for zinc-air batteries

SignificanceIn recent years, lithium-ion batteries (LIBs) have been widely applied in electric vehicles as energy storage devices. However, it is a great challenge to deal with the large number of spent LIBs. In this work, we employ a rapid thermal radiation method to convert the spent LIBs into highly efficient bifunctional NiMnCo-activated carbon (NiMnCo-AC) catalysts for zinc-air batteries (ZABs). The obtained NiMnCo-AC catalyst shows excellent electrochemical performance in ZABs due to the unique core-shell structure, with face-centered cubic Ni in the core and spinel NiMnCoO4 in the shell. This work provides an economical and environment-friendly approach to recycling the spent LIBs and converting them into novel energy storage devices.

Hybrid Transition Metal (V, Fe, and Co) Oxide/Sulfide Catalyst for High-efficient Overall Water Splitting

Hydrogen is an ideal clean energy without any carbon emissions and producing hydrogen by water electrolysis is also eco-friendly and efficient. Herein we proposed a universal strategy of synthesizing transition...

Research Progress of Oxygen Evolution Reaction Catalysts for Electrochemical Water Splitting

The development of a low-cost and high-efficiency oxygen evolution reaction (OER) catalyst is essential to meet the future industrial demand for hydrogen production by electrochemical water splitting. Given the limited reserves of noble metals and many competitive applications in environmental protection, new energy, and chemical industries, many studies have focused on exploring new and efficient non-noble metal catalytic systems, improving the understanding of the OER mechanism of non-noble metal surfaces, and designing electrocatalysts with higher activity than traditional noble metals. This Review summarizes the research progress of anode OER catalysts for hydrogen production by electrochemical water splitting in recent years, for noble metal and non-noble metal catalysts, where non-noble metal catalysts are highlighted. The categories are as follows: (1) Transition metal-based compounds, including transition metal-based oxides, transition metal-based layered hydroxides, and transition metal-based sulfides, phosphides, selenides, borides, carbides, and nitrides. Transition metal-based oxides can also be divided into perovskite, spinel, amorphous, rock-salt-type, and lithium oxides according to their different structures. (2) Carbonaceous materials and their composite materials with transition metals. (3) Transition metal-based metal-organic frameworks and their derivatives. Finally, the challenges and future development of the OER process of water splitting are discussed.

Structural Variations of Metal Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Electrocatalytic oxygen evolution reaction (OER), an important electrode reaction in electrocatalytic and photoelectrochemical cells for a carbon-free energy cycle, has attracted considerable attention in the last few years. Metal oxides have been considered as good candidates for electrocatalytic OER because they can be easily synthesized and are relatively stable during the OER process. However, inevitable structural variations still occur to them due to the complex reaction steps and harsh working conditions of OER, thus impending the further insight into the catalytic mechanism and rational design of highly efficient electrocatalysts. The aim of this review is to disclose the current research progress toward the structural variations of metal oxide-based OER electrocatalysts. The origin of structural variations of metal oxides is discussed. Based on some typical oxides performing OER activity, the external and internal factors that influence the structural stability are summarized and then some general approaches to regulate the structural variation process are provided. Some operando methods are also concluded to monitor the structural variation processes and to identify the final active structure. Additionally, the unresolved problems and challenges are presented in an attempt to get further insight into the mechanism of structural variations and establish a rational structure-catalysis relationship.

Tuning Reconstruction Level of Precatalysts to Design Advanced Oxygen Evolution Electrocatalysts

Surface reconstruction engineering is an effective strategy to promote the catalytic activities of electrocatalysts, especially for water oxidation. Taking advantage of the physicochemical properties of precatalysts by manipulating their structural self-reconstruction levels provide a promising methodology for achieving suitable catalysts. In this review, we focus on recent advances in research related to the rational control of the process and level of surface transformation ultimately to design advanced oxygen evolution electrocatalysts. We start by discussing the original contributions to surface changes during electrochemical reactions and related factors that can influence the electrocatalytic properties of materials. We then present an overview of current developments and a summary of recently proposed strategies to boost electrochemical performance outcomes by the controlling structural self-reconstruction process. By conveying these insights, processes, general trends, and challenges, this review will further our understanding of surface reconstruction processes and facilitate the development of high-performance electrocatalysts beyond water oxidation.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

A Trimetallic Cobalt/Iron/Nickel Phytate Catalyst for Overall Water Splitting: Fabrication by Magnetic-Field-Assisted Bipolar Electrodeposition

Electrodeposition is an effective method to prepare various materials. We have established a bipolar electrodeposition system assisted by a constant magnetic field to fabricate a Co/Fe/Ni phytate catalyst with good electrocatalytic activity for overall water splitting. The effects of magnetic and electric fields on the catalytic properties of the material were studied. The catalyst prepared with an N-pole magnetic field (NPMF) exhibited good overall water splitting performance. Benefiting from the synergistic effect of the Co/Fe/Ni-phytate and the advantages of the N-pole magnetic field the NPMF electrode has a continuous 25 hours high-efficiency hydrogen evolution and oxygen evolution reaction at a current density of 100 mA cm^-2 in1.0 M KOH compared with commercial RuO₂ and Pt/C. Bipolar electrodeposition with a constant magnetic field is thus an efficient means to fabricate electrocatalytic water splitting catalysts.

Utilizing ion leaching effects for achieving high oxygen-evolving performance on hybrid nanocomposite with self-optimized behaviors

Ion leaching from pure-phase oxygen-evolving electrocatalysts generally exists, leading to the collapse and loss of catalyst crystalline matrix. Here, different from previous design methodologies of pure-phase perovskites, we introduce soluble BaCl₂ and SrCl₂ into perovskites through a self-assembly process aimed at simultaneously tuning dual cation/anion leaching effects and optimizing ion match in perovskites to protect the crystalline matrix. As a proof-of-concept, self-assembled hybrid Ba_0.35Sr_0.65Co_0.8Fe_0.2O_3-δ (BSCF) nanocomposite (with BaCl₂ and SrCl₂) exhibits the low overpotential of 260 mV at 10 mA cm^-2 in 0.1 M KOH. Multiple operando spectroscopic techniques reveal that the pre-leaching of soluble compounds lowers the difference of interfacial ion concentrations and thus endows the host phase in hybrid BSCF with abundant time and space to form stable edge/face-sharing surface structures. These self-optimized crystalline structures show stable lattice oxygen active sites and short reaction pathways between Co–Co/Fe metal active sites to trigger favorable adsorption of OH⁻ species.

Water oxidation catalysis may provide the electrons needed for sustainable fuel production, but catalysts often degrade under working conditions. Here, authors introduce soluble species into perovskites to exert positive ion leaching effects for enhancing perovskite stability and activity.

Bulk and Surface Properties Regulation of Single/Double Perovskites to Realize Enhanced Oxygen Evolution Reactivity

Perovskite-based oxides have emerged as promising oxygen evolution reaction (OER) electrocatalysts. The performance is closely related to the lattice, electronic, and defect structure of the oxides, which determine surface and bulk properties and consequent catalytic activity and durability. Further, interfacial interactions between phases in a nanocomposite may affect bulk transportation and surface adsorption properties in a similar manner to phase doping except without solubility limits. Herein, we report the development of a single/double perovskite nanohybrid with limited surface self-reconstruction capability as an OER electrocatalyst. Such superior performance arises from a structure that maintains high crystallinity post OER catalysis, in addition to forming an amorphous layer following the self-reconstruction of a single perovskite structure during the OER process. In situ X-ray absorption near edge structure spectroscopy and high-resolution synchrotron-based X-ray diffraction reveal an amorphization process in the hybrid single/double perovskite oxide system that is limited in comparison to single perovskite amorphization, ensuring high catalytic activity.

An Fe-V@NiO heterostructure electrocatalyst towards the oxygen evolution reaction

The development of a nonprecious and Earth-abundant electrocatalyst with high electrocatalytic activity for the oxygen evolution reaction (OER) is an emerging hot issue and remains a grand challenge. In the present work, we proposed a facile strategy to construct ultrathin NiO nanosheets decorated with Fe-V nanoparticles on nickel foam (Fe-V@NiO/NF) for use as an OER electrocatalyst. Due to the 3D rational configuration, the Fe-V@NiO/NF with a heterostructure shows excellent electrocatalytic activity towards the OER. Interestingly, it is found that in situ oxidation by galvanostatic electrolysis in alkaline solution is beneficial to enhance the OER performance. After 10 h of electrolysis, a current density of 50 mA cm^-2 is achieved at a low overpotential of 271.1 mV. This is because during the in situ oxidation process, iron and vanadium ions insert into the NiO lattice and lead to the generation of highly active α-FeOOH and an amorphous (oxy)-hydroxide layer. Additionally, the charge transfer resistance dramatically reduces with the prolonging of oxidation time.