Nitrogen-Stabilized Low-Valent Ni Motifs for Efficient CO2 Electrocatalysis

In situ/Operando Synchrotron Radiation Analytical Techniques for CO2/CO Reduction Reaction: From Atomic Scales to Mesoscales

Electrocatalytic carbon dioxide/carbon monoxide reduction reaction (CO(2)RR) has emerged as a prospective and appealing strategy to realize carbon neutrality for manufacturing sustainable chemical products. Developing highly active electrocatalysts and stable devices has been demonstrated as effective approach to enhance the conversion efficiency of CO(2)RR. In order to rationally design electrocatalysts and devices, a comprehensive understanding of the intrinsic structure evolution within catalysts and micro-environment change around electrode interface, particularly under operation conditions, is indispensable. Synchrotron radiation has been recognized as a versatile characterization platform, garnering widespread attention owing to its high brightness, elevated flux, excellent directivity, strong polarization and exceptional stability. This review systematically introduces the applications of synchrotron radiation technologies classified by radiation sources with varying wavelengths in CO(2)RR. By virtue of in situ/operando synchrotron radiationanalytical techniques, we also summarize relevant dynamic evolution processes from electronic structure, atomic configuration, molecular adsorption, crystal lattice and devices, spanning scales from the angstrom to the micrometer. The merits and limitations of diverse synchrotron characterization techniques are summarized, and their applicable scenarios in CO(2)RR are further presented. On the basis of the state-of-the-art fourth-generation synchrotron facilities, a perspective for further deeper understanding of the CO(2)RR process using synchrotron radiation analytical techniques is proposed.

Magnetic fields promote electrocatalytic CO2 reduction via subtle modulations of magnetic moments and molecular bonding

Introducing a magnetic-field gradient into an electrically driven chemical reaction is expected to give rise to intriguing research possibilities. In this work, we elaborate on the modes and mechanisms of electrocatalytic activity (from the perspective of alignment of magnetic moments) and selectivity (at the molecular level) for the CO2 reduction reaction in response to external magnetic fields. We establish a positive correlation between magnetic field strengths and apparent current densities. This correlation can be rationalized by the formation of longer-range ordering of magnetic moments and the resulting decrease in the scattering of conduction electrons and charge-transfer resistances as the field strength increases. Furthermore, aided by the magnetic-field-equipped operando infrared spectroscopy, we find that applied magnetic fields are capable of weakening the C-O bond strength of the key intermediate ∗COOH and elongating the C-O bond length, thereby increasing the faradaic efficiency for the electroreduction of CO2 to CO.

Elevated temperature-driven coordinative reconstruction of an unsaturated single-Ni-atom structure with low valency on a polymer-derived matrix for the electrolytic oxygen evolution reaction

A high-temperature pyrolysis-controlled coordination reconstruction resulted in a single-Ni-atom structure with a Ni-Nx-C structural unit (x = N atom coordinated to Ni). Pyrolysis of Ni-phen@ZIF-8-RF at 700 °C resulted in NiNP-NC-700 with predominantly Ni nanoparticles. Upon elevating the pyrolysis temperature from 700 to 900 °C, a coordination reconstruction offers Ni-Nx atomic sites in NiSA-NC-900. A combined investigation with X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and soft X-ray L3-edge spectroscopy suggests the stabilization of low-valent Niδ+ (0 < δ < 2) in the Ni-N-C structural units. The oxygen evolution reaction (OER) is a key process during water splitting in fuel cells. However, OER is a thermodynamically uphill reaction with multi-step proton-coupled electron transfer and sluggish kinetics, due to which there is a need for a catalyst that can lower the OER overpotentials. The adsorption energy of a multi-step reaction on a single metal atom with coordination unsaturation tunes the adsorption of each oxygenated intermediate. The promising OER activity of the NiSA-NC-900/NF anode on nickel foam was followed by the overall water splitting (OWS) using using NiSA-NC-900/NF as anode and Pt coil as the cathodic counterpart, wherein a cell potential of 1.75 V at 10 mA cm-2 was achieved. The cell potential recorded with Pt(-)/(+)NiSA-NC-900/NF was much lower than that obtained for other cells, i.e., Pt(-)/NF and NF(-)/(+)NF, which enhances the potentials of low-valent NiSAs for insightful understanding of the OER. At a constant applied potential of 1.61 V (vs. RHE) for 12 h, an small increase in current for initial 0.6 h followed by a constant current depicts the fair stability of catalyst for 12 h. Our results offer an insightful angle into the OER with a coordinatively reconstructed single-Ni-atom structure at lower valency (<+2).

Pulse Electrolysis Turns on CO2 Methanation through N-Confused Cupric Porphyrin

Breaking the D4h symmetry in the square-planar M-N4 configuration of macrocycle molecular catalysts has witnessed enhanced electrocatalytic activity, but at the expense of electrochemical stability. Herein, we hypothesize that the lability of the active Cu-N3 motifs in the N-confused copper (II) tetraphenylporphyrin (CuNCP) could be overcome by applying pulsed potential electrolysis (PPE) during electrocatalytic carbon dioxide reduction. We find that applying PPE can indeed enhance the CH4 selectivity on CuNCP by 3 folds to reach the partial current density of 170 mA cm-2 at >60 % Faradaic efficiency (FE) in flow cell. However, combined ex situ X-ray diffraction (XRD), transmission electron microscope (TEM), and in situ X-ray absorption spectroscopy (XAS), infrared (IR), Raman, scanning electrochemical microscopy (SECM) characterizations reveal that, in a prolonged time scale, the decomplexation of CuNCP is unavoidable, and the promoted water dissociation under high anodic bias with lowered pH and enriched protons facilitates successive hydrogenation of *CO on the irreversibly reduced Cu nanoparticles, leading to the improved CH4 selectivity. As a key note, this study signifies the adaption of electrolytic protocol to the catalyst structure for tailoring local chemical environment towards efficient CO2 reduction.

Microwave-Assisted Rapid Synthesis of MOF-Based Single-Atom Ni Catalyst for CO2 Electroreduction at Ampere-Level Current

Carbon-based single-atom catalysts (SACs) have attracted tremendous interest in heterogeneous catalysis. However, the common electric heating techniques to produce carbon-based SACs usually suffer from prolonged heating time and tedious operations. Herein, a general and facile microwave-assisted rapid pyrolysis method is developed to afford carbon-based SACs within 3 min without inert gas protection. The obtained carbon-based SACs present high porosity and comparable carbonization degree to those obtained by electric heating techniques. Specifically, the single-atom Ni implanted N-doped carbon (Ni1 -N-C) derived from a Ni-doped metal-organic framework (Ni-ZIF-8) exhibits remarkable CO Faradaic efficiency (96 %) with a substantial CO partial current density (jCO ) up to 1.06 A/cm2 in CO2 electroreduction, far superior to the counterpart obtained by traditional pyrolysis with electric heating. Mechanism investigations reveal that the resulting Ni1 -N-C presents abundant defective sites and mesoporous structure, greatly facilitating CO2 adsorption and mass transfer. This work establishes a versatile approach to rapid and large-scale synthesis of SACs as well as other carbon-based materials for efficient catalysis.

Confined Ni nanoparticles in N-doped carbon nanotubes for excellent pH-universal industrial-level electrocatalytic CO2 reduction and Zn-CO2 battery

Electrocatalytic reduction of CO2 (ECR) offers a promising approach to curbed carbon emissions and complete carbon cycles. However, the inevitable creation of carbonates and limited CO2 utilization efficiency in neutral or alkaline electrolytes result in low energy efficiency, carbon losses and its widespread commercial utilization. The advancement of CO2 reduction under acidic conditions offers a promising approach for their commercial utilization, but the inhibition of hydrogen evolution reaction and the corrosion of catalysts are still challenging. Herein, Ni nanoparticles (NPs) wrapped in N-doped carbon nanotubes (NixNC-a) are successfully prepared by a facile mixed-heating and freeze-drying method. Ni100NC-a achieves a high Faraday efficiency (FE) of near 100 % for CO under pH-universal conditions, coupled with a promising current density of CO (>100 mA cm-2). Especially in acidic conditions, Ni100NC-a exhibits an exceptional ECR performance with the high FECO of 97.4 % at -1.44 V and the turnover frequency (TOF) of 11 k h-1 at -1.74 V with a current density of 288.24 mA cm-2. This excellent performance is attributed to the synergistic effect of Ni NPs and N-doped carbon shells, which protects Ni NPs from etching, promotes CO2 adsorption and regulates local pH. Moreover, Ni100NC-a could drive the reversible Zn-CO2 battery with a high power-density of 4.68 mW cm-2 and a superior stability (98 h). This study presents a promising candidate for efficient pH-universal CO2 electroreduction and Zn-CO2 battery.

Coordination Confined Thermolysis Synthesis of the Ni Single Atom Catalyst on the N-Doped Commercial Carbon for the Production of Syngas

The electrochemical conversion of CO2 into controllable syngas (CO/H2) over a wide potential range is challenging. The main electrocatalysts are based on the noble metals Au (Ag) or heavy metal Pb. The development of alternative nonprecious catalysts is of paramount importance for practice. In this work, a simple coordination confined thermal pyrolysis method has been developed for the synthesis of Ni single-atom catalyst loaded onto nitrogen-doped commercial carbon. The catalyst is in the form of NiN3-C, which exhibits a high-performance electrocatalytic reduction of CO2 toward producing syngas with Faraday efficiencies of 62.28% of CO and 36.7% of H2. The Gibbs free energies of COOH* and H* on the NiN3-C structure were estimated by using density functional theory (DFT). The formation of COOH* intermediate is the speed-limiting step in the process, with ΔG COOH* being 0.7 eV, while H* is the speed-limiting step in the hydrogen evolution, respectively. This work provides a feasible method for the achievement of nonprecious catalysts for the resourceful use of CO2.

Comprehensive Insights and Advancements in Gel Catalysts for Electrochemical Energy Conversion

Continuous worldwide demands for more clean energy urge researchers and engineers to seek various energy applications, including electrocatalytic processes. Traditional energy-active materials, when combined with conducting materials and non-active polymeric materials, inadvertently leading to reduced interaction between their active and conducting components. This results in a drop in active catalytic sites, sluggish kinetics, and compromised mass and electronic transport properties. Furthermore, interaction between these materials could increase degradation products, impeding the efficiency of the catalytic process. Gels appears to be promising candidates to solve these challenges due to their larger specific surface area, three-dimensional hierarchical accommodative porous frameworks for active particles, self-catalytic properties, tunable electronic and electrochemical properties, as well as their inherent stability and cost-effectiveness. This review delves into the strategic design of catalytic gel materials, focusing on their potential in advanced energy conversion and storage technologies. Specific attention is given to catalytic gel material design strategies, exploring fundamental catalytic approaches for energy conversion processes such as the CO2 reduction reaction (CO2RR), oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and more. This comprehensive review not only addresses current developments but also outlines future research strategies and challenges in the field. Moreover, it provides guidance on overcoming these challenges, ensuring a holistic understanding of catalytic gel materials and their role in advancing energy conversion and storage technologies.

Reversible Structural Evolution of Metal-Nitrogen-Doped Carbon Catalysts During CO2 Electroreduction: An Operando X-ray Absorption Spectroscopy Study

Electrochemical CO2 reduction (CO2 RR) is a rising technology, aiming to reduce the energy sector dependence on fossil fuels and to produce carbon-neutral raw materials. Metal-nitrogen-doped carbons (M-N-C) are emerging, cost-effective catalysts for this reaction; however, their long-term stability is a major issue. To overcome this, understanding their structural evolution is crucial, requiring systematic in-depth operando studies. Here a series of M-N-C catalysts (M = Fe, Sn, Cu, Co, Ni, Zn) is investigated using operando X-ray absorption spectroscopy. It is found that the Fe-N-C and Sn-N-C are prone to oxide clusters formation even before CO2 RR. In contrast, the respective metal cations are singly dispersed in the as-prepared Cu-N-C, Co-N-C, Ni-N-C, and (Zn)-N-C. During CO2 RR, metallic clusters/nanoparticles reversibly formed in all catalysts, except for the Ni-N-C. This phenomenon, previously observed only in Cu-N-C, thus is ubiquitous in M-N-C catalysts. The competition between M-O and M-N interactions is an important factor determining the mobility of metal species in M-N-C. Specifically, the strong interaction between the Ni centers and the N-functional groups of the carbon support results in higher stability of the Ni single-sites, leading to the excellent performance of Ni-N-C in the CO2 to CO conversion, in comparison to other transition metals.

Recent Progress on Perovskite-Based Electrocatalysts for Efficient CO2 Reduction

An efficient carbon dioxide reduction reaction (CO2RR), which reduces CO2 to low-carbon fuels and high-value chemicals, is a promising approach for realizing the goal of carbon neutrality, for which effective but low-cost catalysts are critically important. Recently, many inorganic perovskite-based materials with tunable chemical compositions have been applied in the electrochemical CO2RR, which exhibited advanced catalytic performance. Therefore, a timely review of this progress, which has not been reported to date, is imperative. Herein, the physicochemical characteristics, fabrication methods and applications of inorganic perovskites and their derivatives in electrochemical CO2RR are systematically reviewed, with emphasis on the structural evolution and product selectivity of these electrocatalysts. What is more, the current challenges and future directions of perovskite-based materials regarding efficient CO2RR are proposed, to shed light on the further development of this prospective research area.

Air-Stable Ni Catalysts Prepared by Liquid-Phase Reduction Using Hydrosilanes for Reactions with Hydrogen

The liquid-phase reduction method for the preparation of metal nanoparticles (NPs) by the reduction of metal salts or metal complexes in a solvent with a reducing agent is widely used to prepare Ni NPs that exhibit high catalytic activity in various organic transformations. Intensive research has been conducted on control of the morphology and size of Ni NPs by the addition of polymers and long-chain compounds as protective agents; however, these agents typically cause a decrease in catalytic activity. Here, we report on the preparation of Ni NPs using hydrosilane (Ni-Si) as a reducing agent and a size-controlling agent. The substituents on silicon can control not only the size but also the crystal phase of the Ni NPs. The prepared Ni NPs exhibited high catalytic performance for the hydrogenation of unsaturated compounds, aromatics, and heteroaromatics to give the corresponding hydrogenated products in high yields. The unique feature of Ni catalysts prepared by the hydrosilane-assisted method is that the catalysts can be handled under air as opposed to conventional Ni catalysts such as Raney Ni. Characterization studies indicated that the surface hydroxide was reduced under the catalytic reaction conditions with H2 at around 100 °C and with the assistance of organosilicon compounds deposited on the catalyst surface. The hydrosilane-assisted method presented here could be applied to the preparation of supported Ni catalysts (Ni-Si/support). The interaction between the Ni NPs and a metal oxide support enabled the direct amination of alcohols with ammonia to afford the primary amine selectively.

Dual-Site Metal Catalysts for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO2 reduction reaction (CO2 RR) is a promising and green approach for reducing atmospheric CO2 concentration and achieving high-valued conversion of CO2 under the carbon-neutral policy. In CO2 RR, the dual-site metal catalysts (DSMCs) have received wide attention for their ingenious design strategies, abundant active sites, and excellent catalytic performance attributed to the synergistic effect between dual-site in terms of activity, selectivity and stability, which plays a key role in catalytic reactions. This review provides a systematic summary and detailed classification of DSMCs for CO2 RR, describes the mechanism of synergistic effects in catalytic reactions, and also introduces in situ characterization techniques commonly used in CO2 RR. Finally, the main challenges and prospects of dual-site metal catalysts and even multi-site catalysts for CO2 recycling are analyzed. It is believed that based on the understanding of bimetallic site catalysts and synergistic effects in CO2 RR, well-designed high-performance, low-cost electrocatalysts are promising for achieving CO2 conversion, electrochemical energy conversion and storage in the future.

An orientated mass transfer in Ni-Cu tandem nanofibers for highly selective reduction of CO2 to ethanol

Electrochemically reducing CO2 to ethanol is attractive but suffers from poor selectivity. Tandem catalysis that integrates the activation of CO2 to an intermediate using one active site and the subsequent formation of hydrocarbons on the other site offers a promising approach, where the control of the intermediate transfer between different catalytic sites is challenging. We propose an internally self-feeding mechanism that relies on the orientation of the mass transfer in a hierarchical structure and demonstrate it using a one-dimensional (1D) tandem core-shell catalyst. Specifically, the carbon-coated Ni-core (Ni/C) catalyzes the transformation of CO2-to-CO, after which the CO intermediates are guided to diffuse to the carbon-coated Cu-shell (Cu/C) and experience the selective reduction to ethanol, realizing the orientated key intermediate transfer. Results show that the Faradaic efficiency for ethanol was 18.2% at -1 V vs. RHE (VRHE) for up to 100 h. The following mechanism study supports the hypothesis that the CO2 reduction on Ni/C generates CO, which is further reduced to ethanol on Cu/C sites. Density functional theory calculations suggest a combined effect of the availability of CO intermediate in Ni/C core and the dimerization of key *CO intermediates, as well as the subsequent proton-electron transfer process on the Cu/C shell.

Asymmetric dinitrogen-coordinated nickel single-atomic sites for efficient CO2 electroreduction

Developing highly efficient, selective and low-overpotential electrocatalysts for carbon dioxide (CO₂) reduction is crucial. This study reports an efficient Ni single-atom catalyst coordinated with pyrrolic nitrogen and pyridinic nitrogen for CO₂ reduction to carbon monoxide (CO). In flow cell experiments, the catalyst achieves a CO partial current density of 20.1 mA cm_geo^-2 at -0.15 V vs. reversible hydrogen electrode (V_RHE). It exhibits a high turnover frequency of over 274,000 site^-1 h^-1 at -1.0 V_RHE and maintains high Faradaic efficiency of CO (FE_CO) exceeding 90% within -0.15 to -0.9 V_RHE. Operando synchrotron-based infrared and X-ray absorption spectra, and theoretical calculations reveal that mono CO-adsorbed Ni single sites formed during electrochemical processes contribute to the balance between key intermediates formation and CO desorption, providing insights into the catalyst's origin of catalytic activity. Overall, this work presents a Ni single-atom catalyst with good selectivity and activity for CO₂ reduction while shedding light on its underlying mechanism.

Hydrogen-Rich Pyrolysis from Ni-Fe Heterometallic Schiff Base Centrosymmetric Cluster Facilitates NiFe Alloy for Efficient OER Electrocatalysts

Binary metal nickel-iron alloys have been proven to have great potential in oxygen evolution reaction (OER) electrocatalysis, but there are still certain challenges in how to construct more efficient nickel-iron alloy electrocatalysts and maximize their own advantages. In this work, a heterometallic nickel-iron cluster (L = C₆₄ H₆₆ Fe₄ N₈ Ni₂ O₁₉ ) of Schiff base (LH₃  = 2-amino-1,3-propanediol salicylaldehyde) is designed as a precursor to explore its behavior in the pyrolysis process under inert atmosphere. The combination of TG-MS, morphology, and X-ray characterization techniques shows that the Schiff base ligands in the heterometallic clusters produces a strong reductive atmosphere during pyrolysis, which enable the two 3d metals Ni and Fe to form NiFe alloys. Moreover, Fe₂ O₃ /Fe_0.64 Ni_0.36 @Cs carbon nanomaterials are formed, in which Fe₂ O₃ /Fe_0.64 Ni_0.36 is the potential active material for OER. It is also found that the centrosymmetric structure of the heterometallic Schiff base precursor is potentially related to the formation of the Fe₂ O₃ /Fe_0.64 Ni_0.36 alloy@carbon structures. The Fe₂ O₃ /Fe_0.64 Ni_0.36 @C-800 provides 274 mV overpotential in 1 m KOH solution at 10 mA cm^-2 in OER. This work provides an effective basis for further research on Schiff base bimetallic doping-derived carbon nanomaterials as excellent OER electrocatalysts.

Revealing the Kinetic Balance between Proton-Feeding and Hydrogenation in CO2 Electroreduction

Electrocatalytic reduction of CO₂ to high-value-added chemicals provides a feasible path for global carbon balance. Herein, the fabrication of Ni_{NP x} @Ni_{SA y} -NG (x,y = 1, 2, 3; NG = nitrogen-doped graphite) is reported, in which Ni single atom sites (Ni_SA ) and Ni nanoparticles (Ni_NP ) coexist. These Ni_{NP x} @Ni_{SA y} -NG presented a volcano-like trend for maximum CO Faradaic efficiency (FE_CO ) with the highest point at Ni_NP2 @Ni_SA2 -NG in CO₂ RR. Ni_NP2 @Ni_SA2 -NG exhibited ≈98% of maximum FE_CO and a large current density of -264 mA cm^-2 at -0.98 V (vs. RHE) in the flow cell. In situ experiment and density functional theory (DFT) calculations confirmed that the proper content of Ni_SA and Ni_NP balanced kinetic between proton-feeding and CO₂ hydrogenation. The Ni_NP in Ni_NP2 @Ni_SA2 -NG promoted the formation of H* and reduced the energy barrier of *CO₂ hydrogenation to *COOH, and CO desorption can be efficiently facilitated by Ni_SA sites, thereby resulting in enhanced CO₂ RR performance.

Scalable synthesis of coordinatively unsaturated metal-nitrogen sites for large-scale CO2 electrolysis

Practical electrochemical CO₂-to-CO conversion requires a non-precious catalyst to react at high selectivity and high rate. Atomically dispersed, coordinatively unsaturated metal-nitrogen sites have shown great performance in CO₂ electroreduction; however, their controllable and large-scale fabrication still remains a challenge. Herein, we report a general method to fabricate coordinatively unsaturated metal-nitrogen sites doped within carbon nanotubes, among which cobalt single-atom catalysts can mediate efficient CO₂-to-CO formation in a membrane flow configuration, achieving a current density of 200 mA cm^-2 with CO selectivity of 95.4% and high full-cell energy efficiency of 54.1%, outperforming most of CO₂-to-CO conversion electrolyzers. By expanding the cell area to 100 cm², this catalyst sustains a high-current electrolysis at 10 A with 86.8% CO selectivity and the single-pass conversion can reach 40.4% at a high CO₂ flow rate of 150 sccm. This fabrication method can be scaled up with negligible decay in CO₂-to-CO activity. In situ spectroscopy and theoretical results reveal the crucial role of coordinatively unsaturated metal-nitrogen sites, which facilitate CO₂ adsorption and key *COOH intermediate formation.

A rational design of functional porous frameworks for electrocatalytic CO2 reduction reaction

The electrocatalytic CO₂ reduction reaction (ECO₂RR) is considered one of the approaches with the most potential to achieve lower carbon emissions in the future, but a huge gap still exists between the current ECO₂RR technology and industrial applications. Therefore, the design and preparation of catalysts with satisfactory activity, selectivity and stability for the ECO₂RR have attracted extensive attention. As a classic type of functional porous framework, crystalline porous materials (e.g., metal organic frameworks (MOFs) and covalent organic frameworks (COFs)) and derived porous materials (e.g., MOF/COF composites and pyrolysates) have been regarded as superior catalysts for the ECO₂RR due to their advantages such as designable porosity, modifiable skeleton, flexible active site structure, regulable charge transfer pathway and controllable morphology. Meanwhile, with the rapid development of nano-characterization and theoretical calculation technologies, the structure-activity relationships of functional porous frameworks have been comprehensively considered, i.e., metallic element type, local coordination environment, and microstructure, corresponding to selectivity, activity and mass transfer efficiency for the ECO₂RR, respectively. In this review, the rational design strategy for functional porous frameworks is briefly but precisely generalized based on three key factors including metallic element type, local coordination environment, and microstructure. Then, details about the structure-activity relationships for functional porous frameworks are illustrated in the order of MOFs, COFs, composites and pyrolysates to analyze the effect of the above-mentioned three factors on their ECO₂RR performance. Finally, the challenges and perspectives of functional porous frameworks for the further development of the ECO₂RR are reasonably proposed, aiming to offer insights for future studies in this intriguing and significant research field.

Highly selective CO2 electroreduction to CO by the synergy between Ni-N-C and encapsulated Ni nanoparticles

Efficient catalysts are highly desirable for the selective electrochemical CO₂ reduction reaction (CO₂RR). Ni single-atom catalysts are known as promising CO₂RR catalysts, while Ni NPs are expected to catalyze the competing HER. In this work, we have modified the Ni NPs by encapsulating them into porous Ni-N-C nanosheets (Ni@Ni-N-C), to boost the synergy between Ni NPs and dispersed Ni-N species towards CO₂RR. The CO faradaic efficiency (FE_CO) reached 96.4% at -0.9 V and retained over 90% in a wide potential window. More importantly, FE_CO values of over 94% have been obtained from -50 to -170 mA cm^-2 with a peak FE_CO of 99% in a flow cell. Our work demonstrates that the surface modification of Ni NPs can inhibit the unexpected HER and activate the surface sites, offering a practical design strategy for CO₂RR catalysts.

Positive Valent Metal Sites in Electrochemical CO2 Reduction Reaction

The discovery of high-performance catalysts for the electrochemical CO₂ reduction reaction (CO₂ RR) has faced an enormous challenge for years. The lack of cognition about the surface active structures or centers of catalysts in complex conditions limits the development of advanced catalysts for CO₂ RR. Recently, the positive valent metal sites (PVMS) are demonstrated as a kind of potential active sites, which can facilitate carbon dioxide (CO₂ ) activation and conversation but are always unstable under reduction potentials. Many advanced technologies in theory and experiment have been utilized to understand and develop excellent catalysts with PVMS for CO₂ RR. Here, we present an introduction of some typical catalysts with PVMS in CO₂ RR and give some understanding of the activity and stability for these related catalysts.

Electroreduction of CO2 toward High Current Density

Carbon dioxide (CO2) electroreduction offers an attractive pathway for converting CO2 to valuable fuels and chemicals. Despite the existence of some excellent electrocatalysts with superior selectivity for specific products, these reactions are conducted at low current densities ranging from several mA cm−2 to tens of mA cm−2, which are far from commercially desirable values. To extend the applications of CO2 electroreduction technology to an industrial scale, long-term operations under high current densities (over 200 mA cm−2) are desirable. In this paper, we review recent major advances toward higher current density in CO2 reduction, including: (1) innovations in electrocatalysts (engineering the morphology, modulating the electronic structure, increasing the active sites, etc.); (2) the design of electrolyzers (membrane electrode assemblies, flow cells, microchannel reactors, high-pressure cells, etc.); and (3) the influence of electrolytes (concentration, pH, anion and cation effects). Finally, we discuss the current challenges and perspectives for future development toward high current densities.

Synthetic strategies for MOF-based single-atom catalysts for photo- and electro-catalytic CO2 reduction

The excessive CO₂ emission has resulted in climate changes, which has threatened human existence. Photocatalytic and electrocatalytic CO₂ reduction, driven by wind electricity and solar energy, are feasible ways of tackling carbon dioxide emission, as both energies are clean and renewable. Single-atom catalyst (SAC) is a candidate owing to excellent electrocatalytic and photocatalytic performance. Methods for preparing an SAC by using metal-organic frameworks (MOFs) as support or precursors are summarized. Also, applications in energy conversion are exhibited. However, the real challenge is to improve the selectivity of catalytic reactions to yield higher value products, which is to be discussed.

Covalent Organic Framework (COF) Derived Ni‐N‐C Catalysts for Electrochemical CO 2 Reduction: Unraveling Fundamental Kinetic and Structural Parameters of the Active Sites

Electrochemical CO₂ reduction is a potential approach to convert CO₂ into valuable chemicals using electricity as feedstock. Abundant and affordable catalyst materials are needed to upscale this process in a sustainable manner. Nickel‐nitrogen‐doped carbon (Ni‐N‐C) is an efficient catalyst for CO₂ reduction to CO, and the single‐site Ni−N_x motif is believed to be the active site. However, critical metrics for its catalytic activity, such as active site density and intrinsic turnover frequency, so far lack systematic discussion. In this work, we prepared a set of covalent organic framework (COF)‐derived Ni‐N‐C catalysts, for which the Ni−N_x content could be adjusted by the pyrolysis temperature. The combination of high‐angle annular dark‐field scanning transmission electron microscopy and extended X‐ray absorption fine structure evidenced the presence of Ni single‐sites, and quantitative X‐ray photoemission addressed the relation between active site density and turnover frequency.

Electrochemical Reduction of CO2 to CO over Transition Metal/N-Doped Carbon Catalysts: The Active Sites and Reaction Mechanism

Electrochemical CO2 reduction to value-added chemicals/fuels provides a promising way to mitigate CO2 emission and alleviate energy shortage. CO2 -to-CO conversion involves only two-electron/proton transfer and thus is kinetically fast. Among the various developed CO2 -to-CO reduction electrocatalysts, transition metal/N-doped carbon (M-N-C) catalysts are attractive due to their low cost and high activity. In this work, recent progress on the development of M-N-C catalysts for electrochemical CO2 -to-CO conversion is reviewed in detail. The regulation of the active sites in M-N-C catalysts and their related adjustable electrocatalytic CO2 reduction performance is discussed. A visual performance comparison of M-N-C catalysts for CO2 reduction reaction (CO2 RR) reported over the recent years is given, which suggests that Ni and Fe-N-C catalysts are the most promising candidates for large-scale reduction of CO2 to produce CO. Finally, outlooks and challenges are proposed for future research of CO2 -to-CO conversion.

Highly Ethylene-Selective Electrocatalytic CO2 Reduction Enabled by Isolated Cu-S Motifs in Metal-Organic Framework Based Precatalysts

Copper-based materials are efficient electrocatalysts for the conversion of CO₂ to C₂₊ products, and most these materials are reconstructed in situ to regenerate active species. It is a challenge to precisely design precatalysts to obtain active sites for the CO₂ reduction reaction (CO₂ RR). Herein, we develop a strategy based on local sulfur doping of a Cu-based metal-organic framework precatalyst, in which the stable Cu-S motif is dispersed in the framework of HKUST-1 (S-HKUST-1). The precatalyst exhibits a high ethylene selectivity in an H-type cell with a maximum faradaic efficiency (FE) of 60.0 %, and delivers a current density of 400 mA cm^-2 with an ethylene FE up to 57.2 % in a flow cell. Operando X-ray absorption results demonstrate that Cu^δ+ species stabilized by the Cu-S motif exist in S-HKUST-1 during CO₂ RR. Density functional theory calculations indicate the partially oxidized Cu^δ+ at the Cu/Cu_x S_y interface is favorable for coupling of the *CO intermediate due to the modest distance between coupling sites and optimized adsorption energy.

A Facile Strategy for Constructing a Carbon-Particle-Modified Metal-Organic Framework for Enhancing the Efficiency of CO2 Electroreduction into Formate

Electrocatalytic reduction of CO₂ by metal-organic frameworks (MOFs) has been widely investigated, but insufficient conductivity limits application. Herein, a porous 3D In-MOF {(Me₂ NH₂ )[In(BCP)]⋅2 DMF}_n (V11) with good stability was constructed with two types of channels (1.6 and 1.2 nm diameter). V11 exhibits moderate catalytic activity in CO₂ electroreduction with 76.0 % of Faradaic efficiency for formate (FE_HCOO- ). Methylene blue molecules of suitable size and pyrolysis temperature were introduced and transformed into carbon particles (CPs) after calcination. The performance of the obtained CPs@V11 is significantly improved both in FE_HCOO- (from 76.0 % to 90.1 %) and current density (2.2 times). Control experiments show that introduced CPs serve as accelerant to promote the charges and mass transfer in framework, and benefit to sufficiently expose active sites. This strategy can also work on other In-MOFs, demonstrating the universality of this method for electroreduction of CO₂ .

Rationally Constructing A Nano MOF-Derived Ni and CQD Embedded N-Doped Carbon Nanosphere for the Hydrogenation of Petroleum Resin at Low Temperature

A key issue in attaining highly efficient supported catalysts for the hydrogenation of unsaturated polymers arises from the entanglement between the number of exposed active sites and the severe internal mass transfer limitation caused by their large molecular size. Hence, an ultrasmall N-doped carbon nanosphere with Ni NPs and CQDs embedded (Ni-CQDs/NCNs) was reasonably constructed by low-temperature (400 °C) pyrolysis of the precursor CQDs@Nano-Ni-ZIFs. As-prepared Ni-CQDs/NCNs exhibited superior catalytic activity to a commercial 10% Pd/C catalyst in petroleum resin hydrogenation under a low temperature of 150 °C, which is 100 and 60 °C lower than that of previously reported Ni- and Pd-based catalysts, respectively. The excellent catalytic activity of Ni-CQDs/NCNs mainly contributes to the following factors: first, its ultrasmall structure (ca. 50 nm) eliminates the internal mass transfer limitation; second, the CQDs and N-doped carbon matrix stabilize the 53.1 wt % high-loading Ni NPs at a small size of 5.6 nm, providing abundant active sites; and third, the electronic regulation of N-doped carbon enhances the intrinsic activity of Ni, which was revealed by the experiments and DFT calculations. Besides, Ni-CQDs/NCNs exhibits long-term stability and appreciable magnetic separation performance, making it a considerable candidate for industrial application. This work not only offers a facile approach to prepare nano MOF-derived catalysts but also gives helpful instruction to the rational design of heterogeneous catalysts for the reaction involving large molecules.

The atomic-level regulation of single-atom site catalysts for the electrochemical CO2 reduction reaction

The electrochemical CO2 reduction reaction (CO2RR) is viewed as a promising way to remove the greenhouse gas CO2 from the atmosphere and convert it into useful industrial products such as methane, methanol, formate, ethanol, and so forth. Single-atom site catalysts (SACs) featuring maximum theoretical atom utilization and a unique electronic structure and coordination environment have emerged as promising candidates for use in the CO2RR. The electronic properties and atomic structures of the central metal sites in SACs will be changed significantly once the types or coordination environments of the central metal sites are altered, which appears to provide new routes for engineering SACs for CO2 electrocatalysis. Therefore, it is of great importance to discuss the structural regulation of SACs at the atomic level and their influence on CO2RR activity and selectivity. Despite substantial efforts being made to fabricate various SACs, the principles of regulating the intrinsic electrocatalytic performances of the single-atom sites still needs to be sufficiently emphasized. In this perspective article, we present the latest progress relating to the synthesis and catalytic performance of SACs for the electrochemical CO2RR. We summarize the atomic-level regulation of SACs for the electrochemical CO2RR from five aspects: the regulation of the central metal atoms, the coordination environments, the interface of single metal complex sites, multi-atom active sites, and other ingenious strategies to improve the performance of SACs. We highlight synthesis strategies and structural design approaches for SACs with unique geometric structures and discuss how the structure affects the catalytic properties.

Confining Chainmail-Bearing Ni Nanoparticles in N-doped Carbon Nanotubes for Robust and Efficient Electroreduction of CO2

It still remains challenging to simultaneously achieve high stability, selectivity, and activity in CO₂ reduction. Herein, a dual chainmail-bearing nickel-based catalyst (Ni@NC@NCNT) was fabricated via a solvothermal-evaporation-calcination approach. In situ encapsulated N-doped carbon layers (NCs) and nanotubes (NCNTs) gave a dual protection to the metallic core. The confined space well maintained the local alkaline pH value and suppressed hydrogen evolution. Large surface area and abundant pyridinic N and Ni^δ+ sites ensured high CO₂ adsorption capacity and strength. Benefitting from these, it delivered a CO faradaic efficiency of 94.1 % and current density of 48.0 mA cm^-2 at -0.75 and -1.10 V, respectively. Moreover, the performance remained unchanged after continuous electrolysis for 43 h, far exceeding Ni@NC with single chainmail, Ni@NC/NCNT with Ni@NC sitting on the walls of NCNT, bare NCNT and most state-of-the-art catalysts, demonstrating structural superiority of Ni@NC@NCNT. This work sheds light on designing unique architectures to improve electrochemical performances.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

Single-Atom and Dual-Atom Electrocatalysts Derived from Metal Organic Frameworks: Current Progress and Perspectives

Single-atom catalysts (SACs) have attracted increasing research interests owing to their unique electronic structures, quantum size effects and maximum utilization rate of atoms. Metal organic frameworks (MOFs) are good candidates to prepare SACs owing to the atomically dispersed metal nodes in MOFs and abundant N and C species to stabilize the single atoms. In addition, the distance of adjacent metal atoms can be turned by adjusting the size of ligands and adding volatile metal centers to promote the formation of isolated metal atoms. Moreover, the diverse metal centers in MOFs can promote the preparation of dual-atom catalysts (DACs) to improve the metal loading and optimize the electronic structures of the catalysts. The applications of MOFs derived SACs and DACs for electrocatalysis, including oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, carbon dioxide reduction reaction and nitrogen reduction reaction are systematically summarized in this Review. The corresponding synthesis strategies, atomic structures and electrocatalytic performances of the catalysts are discussed to provide a deep understanding of MOFs-based atomic electrocatalysts. The catalytic mechanisms of the catalysts are presented, and the crucial challenges and perspectives are proposed to promote further design and applications of atomic electrocatalysts.

The synthetic strategies for single atomic site catalysts based on metal-organic frameworks

Metal-organic frameworks (MOFs) are a good platform for the fabrication of single atomic site catalysts (SACs) due to their large specific surface area, rich pore structure, large number of unsaturated coordination metal sites and their intriguing and controllable structures. The influencing factors of each strategy used to synthesize SACs based on MOFs, such as the finetuning ligand strategy, heteroatom doping (N, P, S) strategy, space restriction strategy, bimetallic strategy, metal cluster defect strategy, substrate to capture strategy, and various post-treatment strategies have not been discussed. Here, we will discuss the influencing factors of each strategy and the relationship between the different methods, which are used to synthesize SACs based on MOFs.

One-step coating of commercial Ni nanoparticles with a Ni, N-co-doped carbon shell towards efficient electrocatalysts for CO2 reduction

Commercial nickel nanoparticles (Ni NPs) were directly converted to efficient electrocatalysts for CO₂ reduction by urea-Ni solid powder pyrolysis, in which a Ni, N-co-doped graphite carbon shell wraps the Ni NPs in situ. 98.3% CO selectivity was realized with a current density of -20.2 mA cm^-2 and an overpotential of 0.69 V.

Rational Design of a N,S Co-Doped Supermicroporous CoFe-Organic Framework Platform for Water Oxidation

It remains a challenge to rational design of a new metal-organic framework (MOF) as highly efficient direct electrocatalysts for the oxygen evolution reaction (OER). Herein, we developed a simple and effective method to explore a new pillared-layered MOF with syringic acid as a promising OER electrocatalyst. The isostructural mono-, heterobimetallic MOF and N,S co-doped MOF by mixing thiourea were quickly synthesized in a high yield under solvothermal condition. Moreover, the optimized N,S co-doped MOF exhibits the lowest overpotential of 254 mV at 10 mA cm^-2 on a glass carbon electrode and a small Tafel slope of 50 mV dec^-1 , especially, this catalyst also possesses long-term electrochemical durability for at least 16 h. According to the characterization, the incorporation of N and S atoms into this heterobimetallic CoFe-based MOF could modify its pore structure, tune the electronic structure, accordingly, improve the mass and electron transportation, and facilitate the formation of active species, as a consequence, the improved activity of this new N,S co-doped MOF for OER should be mainly be ascribed to higher electrochemical activation toward the active species via in situ surface modification during the OER process.