Distribution and Valence State of Ru Species on CeO2 Supports: Support Shape Effect and Its Influence on CO Oxidation

Robust Ru/Ce@Co Catalyst with an Optimized Support Structure for Propane Oxidation

Short carbon chain alkanes, as typical volatile organic compounds (VOCs), have molecular structural stability and low molecular polarity, leading to an enormous challenge in the catalytic oxidation of propane. Although Ru-based catalysts exhibit a surprisingly high activity for the catalytic oxidation of propane to CO2 and H2O, active RuOx species are partially oxidized and sintered during the oxidation reaction, leading to a decrease in catalytic activity and significantly inhibiting their application in industrial processes. Herein, the Ru/Ce@Co catalyst is synthesized with a specific structure, in which cerium dioxide is dispersed in a thin layer on the surface of Co3O4, and Ru nanoparticles fall preferentially on cerium oxide with high dispersity. Compared with the Ru/CeO2 and Ru/Co3O4 catalysts, the Ru/Ce@Co catalyst demonstrates excellent catalytic activity and stability for the oxidation of propane, even under severe operating conditions, such as recycling reaction, high space velocity, a certain degree of moisture, and high temperature. Benefiting from this particular structure, the Ru/Ce@Co (5:95) catalyst with more Ce3+ species leads to the Ru species being anchored more firmly on the CeO2 surface with a low-valent state and has a strong potential for adsorption and activation of propane and oxygen, which is beneficial for RuOx species with high activity and stability. This work provides a novel strategy for designing high-efficiency Ru-based catalysts for the catalytic combustion of short carbon alkanes.

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors.

A facile method for preparing the CeMnO3 catalyst with high activity and stability of toluene oxidation: The critical role of small crystal size and Mn3+-Ov-Ce4+ sites

Volatile organic compounds (VOCs) cause severe environmental pollution and are potentially toxic to humans who have no defense against exposure. Catalytic oxidation of these compounds has thus become an interesting research topic. In this study, microcrystalline CeMnO3 catalysts were prepared by a precipitant-concentration-induced strategy and evaluated for the catalytic oxidation of toluene/benzene. The effect of crystal size on catalytic performance was confirmed by XRD, TEM, N2 adsorption-desorption, XPS, Raman, H2-TPR, and TPSR. The CeMnO3 catalyst with more Mn3+-Ov-Ce4+ active sites exhibited enhanced VOCs catalytic oxidation performance, lowest active energy, and highest turnover frequency, which was attributed to its larger surface area, lower crystal size, higher low-temperature reducibility, and presence of more oxygen defects. In-situ FTIR results suggested more oxygen vacancies can profoundly promote the conversion of benzoate to maleate species, the rate-determining step of toluene oxidation. The work provides a convenient and efficient strategy to prepare single-metal or multi-metal oxide catalysts with smaller crystal sizes for VOC oxidation or other oxidation reactions.

Facilitating the dry reforming of methane with interfacial synergistic catalysis in an Ir@CeO2-x catalyst

The dry reforming of methane provides an attractive route to convert greenhouse gases (CH4 and CO2) into valuable syngas, so as to resolve the carbon cycle and environmental issues. However, the development of high-performance catalysts remains a huge challenge. Herein, we report a 0.6% Ir/CeO2-x catalyst with a metal-support interface structure which exhibits high CH4 (~72%) and CO2 (~82%) conversion and a CH4 reaction rate of ~973 μmolCH4 gcat-1 s-1 which is stable over 100 h at 700 °C. The performance of the catalyst is close to the state-of-the-art in this area of research. A combination of in situ spectroscopic characterization and theoretical calculations highlight the importance of the interfacial structure as an intrinsic active center to facilitate the CH4 dissociation (the rate-determining step) and the CH2* oxidation to CH2O* without coke formation, which accounts for the long-term stability. The catalyst in this work has a potential application prospect in the field of high-value utilization of carbon resources.

Green Synthesis of Ceria Nanoparticles from Cassava Tubers for Electrochemical Aptasensor Detection of SARS-CoV-2 on a Screen-Printed Carbon Electrode

Green synthesis approaches for making nanosized ceria using starch from cassava as template molecules to control the particle size are reported. The results of the green synthesis of ceria with an optimum calcination temperature of 800 °C shows a size distribution of each particle of less than 30 nm with an average size of 9.68 nm, while the ratio of Ce3+ to Ce4+ was 25.6%. The green-synthesized nanoceria are applied to increase the sensitivity and attach biomolecules to the electrode surface of the electrochemical aptasensor system for coronavirus disease (COVID-19). The response of the aptasensor to the receptor binding domain of the virus was determined with the potassium ferricyanide redox system. The screen-printed carbon electrode that has been modified with green-synthesized nanoceria shows 1.43 times higher conductivity than the bare electrode, while those modified with commercial ceria increase only 1.18 times. Using an optimized parameter for preparing the aptasensors, the detection and quantification limits were 1.94 and 5.87 ng·mL-1, and the accuracy and precision values were 98.5 and 89.1%. These results show that green-synthesized ceria could be a promising approach for fabricating an electrochemical aptasensor.

CeO2 nanorods supported CuOx-RuOx bimetallic catalysts for low temperature CO oxidation

Bimetallic catalysts often outperform monometallic catalysts due to changeable structural orientation, synergistic effects, and integration of two different metal or metal oxide properties. Here, a series of CeO2 nanorods (NR) supported bimetallic CuOx and RuOx catalysts (Cu: Ru ratios of 9:1, 7:3, and 5:5) were prepared using a wet impregnation method. In situ DRIFTS, H2 temperature programmed reduction (H2-TPR), CO temperature programmed desorption (CO-TPD), and other characterization techniques were used to investigate the effect of the Cu:Ru ratio on the activity of low-temperature CO oxidation. Among three catalysts, CeO2 NR supported 7 wt% Cu-3 wt% Ru catalyst after a reduction activation treatment showed the best performance with 100 % CO conversion at 166 °C and the lowest activation energy of 18.37 kJ mol-1. Raman and XPS profiles revealed that the origin of the superior performance is at least partially related to the high surface oxygen vacancy concentration and other distinct oxygen species (physi-/chemi-sorbed oxygen and bulk lattice oxygen), leading to outstanding adsorption and oxidation property of CO.

Constructing built-in electric field via ruthenium/cerium dioxide Mott-Schottky heterojunction for highly efficient electrocatalytic hydrogen production

Ensuring the consumption rate of noble metals while guaranteeing satisfactory hydrogen evolution reaction (HER) performance at different pH values is imperative to the development of Ru-based catalysts. Herein, we design a Mott-Schottky electrocatalyst (Ru/CeO2) with a built-in electric field (BEF) based on density functional theory (DFT). The Ru/CeO2 achieves the criterion current density of 10 mA cm-2 at overpotentials of 55 mV, 80 mV, and 120 mV in alkaline, acidic and neutral media, respectively. Both theoretical calculations and experimental analysis confirm that the improved HER activity in the Ru/CeO2 catalyst could be due to the successful construction of BEF at the interface between the prepared Ru clusters and CeO2. Under the action of BEF, the electron-deficient Ru atoms can optimize the adsorption energy of H* and H2O and thus promote HER kinetics. Furthermore, the Ru/CeO2 catalyst delivers a power density of approximately 94.5 mW cm-2 in alkaline-acidic Zn-H2O cell applications while maintaining good H2 production stability. In this work, we optimize the electrocatalytic performance of the Ru/CeO2 catalyst through examination of the interfacial BEF electrical charge, which combines hydrogen production with power generation and provides a promising method for sustainable energy conversion.

The enhancement of benzene total oxidation over RuxCeO2 catalysts at low temperature: The significance of Ru incorporation

Catalytic oxidation is considered to be the most efficient technology for eliminating benzene from waste gas. The challenge is the reduction of the catalytic reaction temperature for the deep oxidation of benzene. Here, highly efficient RuxCeO2 catalysts were utilized to turn the number of surface oxygen vacancies and Ce-O-Ru bonds via a one-step hydrothermal method, resulting in a preferable low-temperature reducibility for the total oxidation of benzene. The T50 of the Ru0.2CeO2 catalyst for benzene oxidation was 135 °C, which was better than that of pristine CeO2 (239 °C) and 0.2Ru/CeO2 (190 °C). The superior performance of Ru0.2CeO2 was attributed to its large surface area (approximately 114.23 m2·g-1), abundant surface oxygen vacancies, and Ce-O-Ru bonds. The incorporation of Ru into the CeO2 lattice could effectively facilitate the destruction of the CeO bond and the facile release of lattice oxygen, inducing the generation of surface oxygen vacancies. Meanwhile, the bridging action of Ce-O-Ru bonds accelerated electron transfer and lattice oxygen transportation, which had a synergistic effect with surface oxygen vacancies to reduce the reaction temperature. The Ru0.2CeO2 catalyst also exhibited high catalytic stability, water tolerance, and impact resistance in terms of benzene abatement. Using in situ infrared spectroscopy, it was demonstrated that the Ru0.2CeO2 catalyst can effectively enhance the accumulation of maleate species, which are key intermediates for benzene ring opening, thereby enhancing the deep oxidation of benzene.

Revealing the intrinsic nature of Ni-, Mn-, and Y-doped CeO2 catalysts with positive, additive, and negative effects on CO oxidation using operando DRIFTS-MS

The catalytic activity of a transition metal (host) oxide can be influenced by doping with a second cation (dopant), but the key factors dominating the activity of the doped catalyst are still controversial. Herein, CeO2 doped with Ni, Mn, and Y catalysts prepared using aerosol pyrolysis were used to demonstrate the positive, negative, and additive effects on CO oxidation as a model reaction. Various characterization results indicated that Ni, Mn, and Y had been successfully doped into the CeO2 lattice. The catalytic activities of each catalyst for CO conversion were in the order of Ni-CeO2 > Mn-CeO2 > CeO2 > Y-CeO2. Operando DRIFTS-MS and various characterization methods were applied to reveal the intrinsic nature of the doping effects. The accumulation rate of the surface bidentate carbonates determined the CO oxidation. A definition to evaluate the doping effect was proposed, which is anticipated to be useful for developing a rational catalyst with a high CO oxidation activity. The CO oxidation reactivities displayed strong correlations with the surface factors obtained from operando DRIFTS-MS analysis and the structure factors from XPS and Raman analyses.

Electron Donation from Boron Suboxides via Strong p-d Orbital Hybridization Boosts Molecular O2 Activation on Ru/TiO2 for Low-Temperature Dibromomethane Oxidation

Low-temperature catalytic oxidation is of significance to the degradation of halogenated volatile organic compounds (HVOCs) to avoid hazardous byproducts with low energy consumption. Efficient molecular oxygen (O2) activation is pivotal to it but usually limited by the insufficient electron cloud density at the metal center. Herein, Ru-B catalysts with enhanced electron density around Ru were designed to achieve efficient O2 activation, realizing dibromomethane (DBM) degradation T90 at 182 °C on RuB1/TiO2 (about 30 °C lower than pristine Ru/TiO2) with a TOFRu value of 0.055 s-1 (over 8 times that of Ru/TiO2). Compared to the limited electron transfer (0.02 e) on pristine Ru/TiO2, the Ru center gained sufficient negative charges (0.31 e) from BOx via strong p-d orbital hybridization. The Ru-B site then acted as the electron donor complexing with the 2π* antibonding orbital of O2 to realize the O2 dissociative activation. The reactive oxygen species formed thereby could initiate a fast conversion and oxidation of formate intermediates, thus eventually boosting the low-temperature catalytic activity. Furthermore, we found that the Ru-B sites for O2 activation have adaptation for pollutant removal and multiple metal availability. Our study shed light on robust O2 activation catalyst design based on electron density adjustment by boron.

A single site ruthenium catalyst for robust soot oxidation without platinum or palladium

The quest for efficient non-Pt/Pd catalysts has proved to be a formidable challenge for auto-exhaust purification. Herein, we present an approach to construct a robust catalyst by embedding single-atom Ru sites onto the surface of CeO2 through a gas bubbling-assisted membrane deposition method. The formed single-atom Ru sites, which occupy surface lattice sites of CeO2, can improve activation efficiency for NO and O2. Remarkably, the Ru1/CeO2 catalyst exhibits exceptional catalytic performance and stability during auto-exhaust carbon particle oxidation (soot), rivaling commercial Pt-based catalysts. The turnover frequency (0.218 h-1) is a nine-fold increase relative to the Ru nanoparticle catalyst. We further show that the strong interfacial charge transfer within the atomically dispersed Ru active site greatly enhances the rate-determining step of NO oxidation, resulting in a substantial reduction of the apparent activation energy during soot oxidation. The single-atom Ru catalyst represents a step toward reducing dependence on Pt/Pd-based catalysts.

Boosting Polyethylene Hydrogenolysis Performance of Ru-CeO2 Catalysts by Finely Regulating the Ru Sizes

Hydrogenolysis is an effective method for converting polyolefins into high-value chemicals. For the supported catalysts commonly used, the size of active metals is of great importance. In this study, it is discovered that the activity of CeO2 -supported Ru single atom, nanocluster, and nanoparticle catalysts shows a volcanic trend in low-density polyethylene (LDPE) hydrogenolysis. Compared with CeO2 supported Ru single atoms and nanoparticles, CeO2 -supported Ru nanoclusters possess the highest conversion efficiency, as well as the best selectivity toward liquid alkanes. Through comprehensive investigations, the metal-support interactions (MSI) and hydrogen spillover effect are revealed as the two key factors in the reaction. On the one hand, the MSI is strongly related to the Ru surface states and the more electronegative Ru centers are beneficial to the activation of CH and CC bonds. On the other hand, the hydrogen spillover capability directly affects the affinity of catalysts and active H atoms, and increasing this affinity is advantageous to the hydrogenation of alkane species. Decreasing the Ru sizes can promote the MSI, but it can also reduce the hydrogen spillover effect. Therefore, only when the two effects achieve a balance, as is the case in CeO2 -supported Ru nanoclusters, can the hydrogenolysis activity be promoted to the optimal value.

Structure engineering of CeO2 for boosting the Au/CeO2 nanocatalyst in the green and selective hydrogenation of nitrobenzene

Exploring eco-friendly and cost-effective strategies for structure engineering at the nanoscale is important for boosting heterogeneous catalysis but still under a long-standing challenge. Herein, multifunctional polyphenol tannic acid, a low-cost natural biomass containing catechol and galloyl species, was employed as a green reducing agent, chelating agent, and stabilizer to prepare Au nanoparticles, which were dispersed on different-shaped CeO₂ supports (e.g., rod, flower, cube, and octahedral). Systematic characterizations revealed that Au/CeO₂-rod had the highest oxygen vacancy density and Ce(III) proportion, favoring the dispersion and stabilization of the metal active sites. Using isopropanol as a hydrogen-transfer reagent, deep insights into the structure-activity relationship of the Au/CeO₂ catalysts with various morphologies of CeO₂ in the catalytic nitrobenzene transfer hydrogenation reaction were gained. Notably, the catalytic performance followed the order: Au/CeO₂-rod (110), (100), (111) > Au/CeO₂-flower (100), (111) > Au/CeO₂-cube (100) > Au/CeO₂-octa (111). Au/CeO₂-rod displayed the highest conversion of 100% nitrobenzene and excellent stability under optimal conditions. Moreover, DFT calculations indicated that nitrobenzene molecules had a suitable adsorption energy and better isopropanol dehydrogenation capacity on the Au/CeO₂ (110) surface. A reaction pathway and the synergistic catalytic mechanism for catalytic nitrobenzene transfer hydrogenation are proposed based on the results. This work demonstrates that CeO₂ structure engineering is an efficient strategy for fabricating advanced and environmentally benign materials for nitrobenzene hydrogenation.

Fabrication and catalytic properties of nanorod-shaped (Pt-Pd)/CeO2 composites

Nanorod-supported (Pt-Pd)/CeO₂ catalysts were synthesized by a simple method of dealloying Al_91.7Ce₈ Pt _X Pd_0.3-X (X = 0, 0.075, 0.1, 0.15, 0.2, 0.3) alloy ribbons. SEM and TEM characterization implied that after calcination treatment, the achieved resultants exhibited interspersed nanorod structures with a rich distribution of nanopores. Catalytic tests showed that the (Pt_0.1-Pd_0.2)/CeO₂ catalyst calcined at 300 °C exhibited the highest catalyst activity for CO oxidation when compared with other catalysts prepared at different noble metal ratios or calcined at other temperatures, whose complete reaction temperature was as low as 100 °C. The outstanding catalytic performance is ascribed to the stable framework structure, rich gas pathways and collaborative effect between the noble Pt and Pd bimetals.

Simultaneously Constructing Active Sites and Regulating Mn-O Strength of Ru-Substituted Perovskite for Efficient Oxidation and Hydrolysis Oxidation of Chlorobenzene

Chlorinated volatile organic compounds (CVOCs) are a class of hazardous pollutants that severely threaten environmental safety and human health. Although the catalytic oxidation technique for CVOCs elimination is effective, enhancing the catalytic efficiency and simultaneously inhibiting the production of organic byproducts is still of great challenge. Herein, Ru-substituted LaMn(Ru)O_{3+ δ} perovskite with Ru-O-Mn structure and weakened Mn-O bond strength has been developed for catalytic oxidation of chlorobenzene (CB). The formed Ru-O-Mn structure serves as favorable sites for CB adsorption and activation, while the weakening of Mn-O bond strength facilitates the formation of active oxygen species and improves oxygen mobility and catalyst reducibility. Therefore, LaMn(Ru)O_{3+ δ} exhibits superior low-temperature activity with the temperature of 90% CB conversion decreasing by over 90 °C compared with pristine perovskite, and the deep oxidation of chlorinated byproducts produced in low temperature is also accelerated. Furthermore, the introduction of water vapor into reaction system triggers the process of hydrolysis oxidation that promotes CB destruction and inhibits the generation of chlorinated byproducts, due to the higher-activity *OOH species generated from the dissociated H₂ O reacting with adsorbed oxygen. This work can provide a unique, high-efficiency, and facile strategy for CVOCs degradation and environmental improvement.

Revisiting the Semi-Hydrogenation of Phenylacetylene to Styrene over Palladium-Lead Alloyed Catalysts on Precipitated Calcium Carbonate Supports

The quest for improved heterogeneous catalysts often leads to sophisticated solutions, which are expensive and tricky to scale up industrially. Herein, the effort to upgrade the existing inorganic nonmetallic materials has seldom been prioritized by the catalysis community, which could deliver cost-effective solutions to upgrade the industrial catalysts catalog. With this philosophy in mind, we demonstrate in this work that alloyed palladium-lead (Pd-Pb) deposited on novel precipitated calcium carbonate (PCC) supports could be considered an upgraded version of the industrial Lindlar catalyst for the semi-hydrogenation of phenylacetylene to styrene. By utilizing PCC supports of variable surface areas (up to 60 m2/g) and alloyed Pd-Pb loading, supported by material characterization tools, we showcase that achieving the “active-site isolation” feature could be the most pivotal criterion to maximize semi-hydrogenated alkenes selectivity at the expense of prohibiting the complete hydrogenation to alkanes. The calcite phase of our PCC supports governs the ultimate catalysis, via complexation with uniformly distributed alloyed Pb, which may facilitate the desired “active-site isolation” feature to boost the selectivity to the preferential product. Through this work, we also advocate increasing research efforts on mineral-based inorganic nonmetallic materials to deliver novel and improved cost-effective catalytic systems.

Switching Amine Oxidation from Imines to Nitriles by Carbon-Hydrogen Bond Activation via Strong Base Modified Strategy

Precisely controlling the product selectivity from the complex reaction is always an attractive topic in the catalysis field. In this paper, the Ru/strong base junction formed by the redox strategy was demonstrated as an efficient catalyst to switch the selectivity in aerobic oxidation of benzylamines. The zirconia-supported ruthenium (Ru-ZrO₂) catalyst could catalyze benzylamine oxidation coupling to imines; however, the potassium oxide strong base modified zirconia-supported ruthenium (Ru-K-ZrO₂) catalyst could catalyze benzylamine oxidation dehydrogenation to nitriles. Insight into the mechanism showed that the base modified catalyst had excellent dehydrogenation ability which was assisted by the C-H bond activation and changed the reaction pathway. The strong base modified strategy may provide a new approach for controlling the performance of heterogeneous catalysts and product selectivity.

Rational Design of Precious-Metal Single-Atom Catalysts for Methane Combustion

Supported precious-metal single-atom catalysts (PM SACs) have emerged as a new frontier of high-performance catalytic material with 100% atom utilization efficiency. However, the rational design of such material with guidance from fundamental understandings of the structure-activity relationship remains challenging. Here, we report the synthesis, characterizations, and mechanistic investigation of various PM SACs supported on nanoceria for CH₄ combustion. Using density functional theory, two descriptors as the d-band center of PMs and oxygen vacancy formation energy are established, which jointly govern the reactivity for CH₄ combustion. These descriptors are thus applied to predict a dual SAC consisting of proximate Pd and Rh sites, demonstrating a remarkable improvement versus Pd or Rh catalyst, respectively. Our results reveal the general strategy of integrating experimental and computational efforts for investigation of various PM SACs in methane combustion, thus paving the way for the next generation of advanced catalytic materials.

Immobilization of a trimeric ruthenium cluster in mesoporous chromium terephthalate and its catalytic application

Molecular trimeric ruthenium carboxylate clusters (Ru₃ clusters) have been introduced into the pore channels of mesoporous metal-organic framework chromium terephthalate [MIL-101(Cr)] by employing a facile two-step post-synthetic strategy in which diamine hooks anchored on the framework metal nodes of the MOF are used to covalently immobilize the Ru₃ clusters. The catalytic activity of the isolated Ru₃ clusters in the pore channels of the MOF was significantly improved compared to the bulk counterpart.

CO2 Activation over Nanoshaped CeO2 Decorated with Nickel for Low-Temperature Methane Dry Reforming

Dry reforming of methane (DRM) is a promising way to convert methane and carbon dioxide into H₂ and CO (syngas). CeO₂ nanorods, nanocubes, and nanospheres were decorated with 1-4 wt % Ni. The materials were structurally characterized using TEM and in situ XANES/EXAFS. The CO₂ activation was analyzed by DFT and temperature-programmed techniques combined with MS-DRIFTS. Synthesized CeO₂ morphologies expose {111} and {100} terminating facets, varying the strength of the CO₂ interaction and redox properties, which influence the CO₂ activation. Temperature-programmed CO₂ DRIFTS analysis revealed that under hydrogen-lean conditions mono- and bidentate carbonates are hydrogenated to formate intermediates, which decompose to H₂O and CO. In excess hydrogen, methane is the preferred reaction product. The CeO₂ cubes favor the formation of a polydentate carbonate species, which is an inert spectator during DRM at 500 °C. Polydentate covers a considerable fraction of ceria's surface, resulting in less-abundant surface sites for CO₂ dissociation.

Selective Ru Adsorption on SnO2/CeO2 Mixed Oxides for Efficient Destruction of Multicomponent Volatile Organic Compounds: From Laboratory to Practical Possibility

Ru-based catalysts have been extensively employed for the catalytic destruction of chlorinated volatile organic compounds (VOCs), but their versatility for other routine VOCs' destruction has been less explored. Herein, we show that Ru-decorated SnO₂/CeO₂ mixed oxides can sustain H₂O and HCl poisonings and are endowed with extraordinary versatility for a wide range of VOCs' destruction. Selective adsorption of Ru on the cassiterite SnO₂ and CeO₂ nanorods through a Coulomb force can rationally tune the oxidation and dechlorination centers on decorated catalysts, where the epitaxial growth of RuO_x on top of SnO₂ is endowed with excellent dechlorination ability and that on CeO₂ is functional as an oxidation center; the latter could also activate H₂O to provide sufficient H protons for HCl formation. Our developed Ru/SnO₂/CeO₂ catalyst can steadily destruct mono-chlorobenzene, ortho-dichlorobenzene, trichloroethylene, dichloromethane, epichlorohydrin, N-hexane, ethyl acetate, toluene, and their mixtures at an optimum temperature of 300 °C, and its monolithic form is also functional at this temperature with few dioxins being detected in the off-gas. Our results imply that the Ru-decorated SnO₂/CeO₂ catalyst can meet the demands of regenerative catalytic oxidation for the treatment of a wide range of VOCs from industrial exhausts.

Efficient Production of Adipic Acid by a Two-Step Catalytic Reaction of Biomass-Derived 2,5-Furandicarboxylic Acid

Efficient catalytic ring-opening coupled with hydrogenation is a promising but challenging reaction for producing adipic acid (AA) from 2,5-furan dicarboxylic acid (FDCA). In this study, AA synthesis is carried out in two steps from FDCA via tetrahydrofuran-2,5-dicarboxylic acid (THFDCA) over a recyclable Ru/Al₂ O₃ and an ionic liquid, [MIM(CH₂ )₄ SO₃ H]I (MIM=methylimidazolium) to deliver 99 % overall yield of AA. Ru/Al₂ O₃ is found to be an efficient catalyst for hydrogenation and hydrogenolysis of FDCA to deliver THFDCA and 2-hydroxyadipic acid (HAA), respectively, where ruthenium is more economically viable than well-known palladium or rhodium hydrogenation catalysts. H₂ chemisorption shows that the alumina phase strongly affects the interaction between Ru nanoparticles (NPs) and supports, resulting in materials with high dispersion and small size of Ru NPs, which in turn are responsible for the high conversion of FDCA. An ionic liquid system, [MIM(CH₂ )₄ SO₃ H]I is applied to the hydrogenolysis of THFDCA for AA production. The [MIM(CH₂ )₄ SO₃ H]I exhibits superior activity, enables simple product isolation with high purity, and reduces the severe corrosion problems caused by the conventional hydroiodic acid catalytic system.

Effects of chemical etching and reduction activation of CeO2 nanorods supported ruthenium catalysts on CO oxidation

In this work, pristine and NaBH₄ etched CeO₂ nanorods supported ruthenium (Ru) catalysts were synthesized and employed to investigate the effects of chemical etching and reduction activation treatment on CO oxidation. With 1 wt% Ru loading, the CeO₂ nanorods supported catalyst samples, after 6 wt% NaBH₄ etching treatment, showed significantly promoted H₂ consumption under 100 °C and low apparent activation energy (i.e., E_a ∼ 31.2 kJ/mol) for CO oxidation. In-situ CO-DRIFTS profiles revealed that, for the reduced sample, the observed CO adsorption at ∼ 2020 cm^-1 at 40 °C may be related to a strong RuO_x-CeO₂ interaction induced by the NaBH₄ etching treatment, which was supported by the oxygen vacancy analysis results of X-ray photoelectron spectroscopy and CO-temperature programmed desorption. The enriched surface defects on CeO₂ support due to the chemical etching and reduction treatments are believed to promote the interaction between RuO_x species and CeO₂, which is responsible for the enhanced activity of CO oxidation.

Towards the Efficient Catalytic Valorization of Chitin to N-Acylethanolamine over Ni/CeO2 Catalyst: Exploring the Shape-Selective Reactivity

Global warming and rising waste content collectively accelerate the development of renewable-derived ‘low-carbon’ chemical technologies. Among all abundant renewables, marine-/food-waste-derived chitin, the only nitrogen-containing sustainable biomass, contains the unique N-acetylglucosamine units, which could be synthetically manipulated to a plethora of organonitrogen chemicals. Herein, we report the efficient one-step catalytic valorization of chitin to N-acylethanolamine over cost-effective Ni/CeO2-based materials, which interestingly demonstrate shape-based reactivity based on CeO2 supports. In general, all three catalysts (Ni on cubic-, rod-, and polyhedral-shaped CeO2 supports) were active for this reaction, but they differed in their catalytic efficiency and time-monitored reaction profiles. Herein, Ni on cubic-shaped CeO2 delivered relatively better and stable catalytic performance, along with its rod-shaped counterpart, while the polyhedral CeO2-based material also delivered decent performance. Such interesting catalytic behavior has been corroborated by their physicochemical properties, as revealed by their characterization studies. Herein, to establish an appropriate structure-property-reactivity relationship, multimodal characterization techniques and control mechanistic experiments have been performed. This work demonstrates a concept to reduce the consumption of primary carbon resources and increase the utilization of secondary waste materials to facilitate a smooth transition from a linear economy (cf. cradle-to-grave model) to a circular economy (cf. cradle-to-cradle model).

Enhanced catalytic performance of atomically dispersed Pd on Pr-doped CeO2 nanorod in CO oxidation

Single-atom noble metal catalysts have been widely studied for catalytic oxidation of CO. Regulating the coordination environment of single metal atom site is an effective strategy to improve the intrinsic catalytic activity of single atom catalyst. In this work, single atom Pd catalyst supported on Pr-doped CeO₂ nanorods was prepared, and the performance and nature of Pr-coordinated atomic Pd site in CO catalytic oxidation are systematically investigated. The structure characterization using AC-HAADF-STEM, EXAFS, XRD and Raman spectroscopy demonstrate the formation of single atom Pd site and abundant surface oxygen vacancies on the surface of Pr-doped CeO₂ nanorod. With the combination of the XPS characterization and DFT calculations, the oxidation state of Pd on Pr-doped CeO₂ nanorod is determined lower than that on CeO₂ nanorod. The turnover frequency of CO oxidation is markedly increased from 8.4 × 10^-3 to 31.9 × 10^-3 s with Pr-doping at 130 ºC and GHSV of 70,000 h^-1. Combined with kinetic studies, DRIFT and DFT calculations, the doped-Pr atoms reduced the formation energy of oxygen vacancies and generate more oxygen vacancies around the atomically dispersed Pd sites on the surface of cerium oxide, which reduces the dissociation energy of oxygen, thereby accelerating the reaction rate of CO oxidation.

The synergistic effect of Hf-O-Ru bonds and oxygen vacancies in Ru/HfO2 for enhanced hydrogen evolution

Ru nanoparticles have been demonstrated to be highly active electrocatalysts for the hydrogen evolution reaction (HER). At present, most of Ru nanoparticles-based HER electrocatalysts with high activity are supported by heteroatom-doped carbon substrates. Few metal oxides with large band gap (more than 5 eV) as the substrates of Ru nanoparticles are employed for the HER. By using large band gap metal oxides substrates, we can distinguish the contribution of Ru nanoparticles from the substrates. Here, a highly efficient Ru/HfO₂ composite is developed by tuning numbers of Ru-O-Hf bonds and oxygen vacancies, resulting in a 20-fold enhancement in mass activity over commercial Pt/C in an alkaline medium. Density functional theory (DFT) calculations reveal that strong metal-support interaction via Ru-O-Hf bonds and the oxygen vacancies in the supported Ru samples synergistically lower the energy barrier for water dissociation to improve catalytic activities.

Although ruthenium nanomaterials have proven to be effective catalysts for H₂ evolution, there is still room for activity improvements. Here, authors develop an efficient Ru/HfO₂ electrocatalyst with tuned Ru-O-Hf bonds and oxygen vacancies that shows high activities for alkaline H₂ evolution.

Probing the morphological effects of ReOx/CeO2 catalysts on the CO2 hydrogenation reaction

The proposed reaction mechanism of different morphological CeO2 supported Re catalysts for CO2 hydrogenation.

Specific reactivity of 4d and 5d transition metals supported over CeO2 for ammonia oxidation

Pt/CeO2 catalysts were most active in selective catalytic oxidation of ammonia, where Pt triggered the activation of surface lattice oxygen, and the dehydrogenation of ammonia assisted by surface lattice oxygen was the rate-determining step.

Effect of CeO2 morphology on the catalytic properties of Au/CeO2 for base-free glucose oxidation

The Au/R-CeO2 catalyst with strong metal–support interaction and abundant oxygen vacancies displays superior glucose oxidation performance, as compared with Au/C-CeO2 and Au/O-CeO2.

Oxygen vacancy distributions and electron localization in a CeO2(100) nanocube

Oxygen vacancy distributions in a 5 nm CeO2 nanocube were determined using the Reverse Monte Carlo method. The oxygen vacancies tend to be located on the surface of the CeO2 nanocube, with far fewer in subsurface and internal regions.

Rare earth element based single-atom catalysts: synthesis, characterization and applications in photo/electro-catalytic reactions

Rare earth elements play an important role in various fields, which has attracted increasing interest from the scientific community. Meanwhile, single-atom catalysts show huge advantages in many aspects compared with traditional nanomaterials due to their 100% atomic utilization efficiency. Thus, the combination of the two concepts has yielded an efficient way to realize the high-value utilization of rare earth elements. In this mini-review, rare earth-based single-atom catalysts including their synthesis methods, characterization means and corresponding applications are constructively summarized and discussed. In particular, the important roles of rare earth elements as active centers in photo/electrocatalytic reactions are focused on. Finally, future prospects are also provided.

Facilitating Catalytic Purification of Auto-Exhaust Carbon Particles via the Fe2O3{113} Facet-dependent Effect in Pt/Fe2O3 Catalysts

The purification efficiency of auto-exhaust carbon particles in the catalytic aftertreatment system of vehicle exhaust is strongly dependent on the interface nanostructure between the noble metal component and oxide supports. Herein, we have elaborately synthesized the catalysts (Pt/Fe₂O₃-R) of Pt nanoparticles decorated on the hexagonal bipyramid α-Fe₂O₃ nanocrystals with co-exposed twelve {113} and six {104} facets. The area ratios (R) of co-exposed {113} to {104} facets in α-Fe₂O₃ nanocrystals were adjusted by the fluoride ion concentration in the hydrothermal method. The strong Pt-Fe₂O₃{113} facet interaction boosts the formation of coordination unsaturated ferric sites for enhancing adsorption/activation of O₂ and NO. Pt/Fe₂O₃-R catalysts exhibited the Fe₂O₃{113} facet-dependent performance during catalytic purification of soot particles in the presence of H₂O. Among the catalysts, the Pt/Fe₂O₃-19 catalyst exhibits the highest catalytic activities (T₅₀ = 365 °C, TOF = 0.13 h^-1), the lowest apparent activation energy (69 kJ mol^-1), and excellent catalytic stability during soot purification. Combined with the results of characterizations and density functional theory calculations, the catalytic mechanism is proposed: the active sites located at the Pt-Fe₂O₃{113} interface can boost the key step of NO oxidation to NO₂. The crystal facet engineering is an effective strategy to obtain efficient catalysts for soot purification in practical applications.

The Study on the Active Site Regulated RuOx/Sn0.2Ti0.8O2 Catalysts with Different Ru Precursors for the Catalytic Oxidation of Dichloromethane

Chlorine-containing volatile organic compounds (CVOCs) present in industrial exhaust gas can cause great harm to the human body and the environment. In order to further study the catalytic oxidation of CVOCs, an active site regulated RuOx/Sn0.2Ti0.8O2 catalyst with different Ru precursors was developed. With Dichloromethane as the model molecule, the activity test results showed that the optimization of Ru precursor using Ru colloid significantly increased the activity of the catalyst (T90 was reduced by about 90 °C when the Ru loading was 1 wt%). The analysis of characterization results showed that the improvement of the catalytic performance was mainly due to the improvement of the active species dispersion (the size of Ru cluster was reduced from 3–4 nm to about 1.3 nm) and the enhancement of the interaction between the active species and the support. The utilization efficiency of the active components was improved by nearly doubling TOF value, and the overall oxidation performance of the catalyst was also enhanced. The relationship between the Ru loading and the catalytic activity of the catalyst was also studied to better determine the optimal Ru loading. It could be found that with the increase in Ru loading, the dispersibility of RuOx species on the catalyst surface gradually decreased, despite the increase in their total amount. The combined influence of these two effects led to little change in the catalytic activity of the catalyst at first, and then a significant increase. Therefore, this research is meaningful for the efficient treatment of CVOCs and further reducing the content of active components in the catalysts.