Hybrids of PtRu Nanoclusters and Black Phosphorus Nanosheets for Highly Efficient Alkaline Hydrogen Evolution Reaction

Direct Electroplating Ruthenium Precursor on the Surface Oxidized Nickel Foam for Efficient and Stable Bifunctional Alkaline Water Electrolysis

Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of Ru─O─Ni bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm-2 (OER: 410 mV; HER: 240 mV), surpassing commercial RuO2 (OER: 600 mV) and Pt/C based performance (HER: 265 mV).

Engineering the electronic structure of sub-nanometric Ru clusters via Pt single-atom modification for highly efficient electrocatalytic hydrogen evolution

Developing electrocatalysts with high activity toward the hydrogen evolution reaction (HER) is a prerequisite for hydrogen fuel generation and sustainable development, but current Pt-based catalysts usually suffer from high cost and unsatisfactory performance in non-acidic media. In this work, we report an environmentally friendly and pyrolysis-free synthesis strategy to prepare an efficient catalyst, CNT-NPA-PtRu, with Pt single-atom engineered sub-nanometric Ru clusters anchored at phytic acid-modified carbon nanotubes for electrochemical HER at all pH conditions. The electronic structure of active sub-nanometric Ru clusters was optimized, which further enhanced the HER activity. The synthesized CNT-NPA-PtRu catalyst presents superior performance, reaching the current density of 10 mA cm-2 with only 18.3, 18.7 and 15 mV overpotential in alkaline, acidic and neutral electrolyte, respectively. Experimental results and theoretical calculations reveal that the single Pt atom on the sub-nanometric Ru cluster surface could modulate the electronic structure of Ru and subsequently optimize the adsorption of reaction intermediates, thus promoting HER performance. These findings underscore the importance of engineering the electronic structure of sub-nanometric clusters and offer an effective approach for the generation of high-performance electrocatalysts for HER.

Transition metal-based electrocatalysts for alkaline overall water splitting: advancements, challenges, and perspectives

Water electrolysis is a promising method for efficiently producing hydrogen and oxygen, crucial for renewable energy conversion and fuel cell technologies. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are two key electrocatalytic reactions occurring during water splitting, necessitating the development of active, stable, and low-cost electrocatalysts. Transition metal (TM)-based electrocatalysts, spanning noble metals and TM oxides, phosphides, nitrides, carbides, borides, chalcogenides, and dichalcogenides, have garnered significant attention due to their outstanding characteristics, including high electronic conductivity, tunable valence electron configuration, high stability, and cost-effectiveness. This timely review discusses developments in TM-based electrocatalysts for the HER and OER in alkaline media in the last 10 years, revealing that the exposure of more accessible surface-active sites, specific electronic effects, and string effects are essential for the development of efficient electrocatalysts towards electrochemical water splitting application. This comprehensive review serves as a guide for designing and constructing state-of-the-art, high-performance bifunctional electrocatalysts based on TMs, particularly for applications in water splitting.

2D Monolayer Catalysts: Towards Efficient Water Splitting and Green Hydrogen Production

A viable alternative to non-renewable hydrocarbon fuels is hydrogen gas, created using a safe, environmentally friendly process like water splitting. An important role in water-splitting applications is played by the development of two-dimensional (2D) layered transition metal chalcogenides (TMDCs), transition metal carbides (MXenes), graphene-derived 2D layered nanomaterials, phosphorene, and hexagonal boron nitride. Advanced synthesis methods and characterization instruments enabled an effective application for improved electrocatalytic water splitting and sustainable hydrogen production. Enhancing active sites, modifying the phase and electronic structure, adding conductive elements like transition metals, forming heterostructures, altering the defect state, etc., can improve the catalytic activity of 2D stacked hybrid monolayer nanomaterials. The majority of global research and development is focused on finding safer substitutes for petrochemical fuels, and this review summarizes recent advancements in the field of 2D monolayer nanomaterials in water splitting for industrial-scale green hydrogen production and fuel cell applications.

Unraveling and Resolving the Inconsistencies in Tafel Analysis for Hydrogen Evolution Reactions

The Tafel slope represents a critical kinetic parameter for mechanistic studies of electrochemical reactions, including the hydrogen evolution reaction (HER). Linear fitting of the polarization curve in a N2-saturated electrolyte is commonly used to determine Tafel slopes, which is, however, frequently plagued with inconsistencies. Our systematic studies reveal that the Tafel slopes derived from this approach are loading- and potential-dependent, and could substantially exceed the theoretical limits. Our analyses indicate that this discrepancy is largely attributed to the locally trapped HER-generated H2 in the catalyst layer. A non-negligible hydrogen oxidation reaction (HOR) current more prominently offsets the HER current at the smaller HER overpotential regime, resulting in an artificially smaller Tafel slope. On the other hand, at the higher overpotential where the HOR current becomes negligible, the locally trapped H2 substantially suppresses further HER current growth, leading to an artificially larger Tafel slope. The Butler-Volmer method accounts for both the HER and HOR currents in the fitting, which offers a more reliable method for pure Pt catalysts but is less applicable to transition-metal decorated Pt surfaces with distinct HER/HOR kinetics. Our studies underscore the challenges in Tafel slope analysis and the need for strict controls for reliable comparisons among different catalyst systems.

Laser-Synthesized Ru-Anchored Few-Layer Black Phosphorus for Superior Hydrogen Evolution: Role of Acoustic Levitation

Electrochemical water splitting, driven by processed catalysts, is the most reasonable method for hydrogen production. This study demonstrates an activation phenomenon with ruthenium (Ru) nanoclusters on few-layered black phosphorus (BP), greatly enhancing the electrocatalytic hydrogen evolution reaction (HER). Efficient BP exfoliation was achieved using acoustic levitators and pulsed laser irradiation in liquids (PLIL), yielding charge-transfer Ru-nanoclusters on modulated surfaces. Various PLIL parameters were examined for the optimal BP sheet size. After ruthenization, Ru's d-band center facilitated hydrogen adsorption via Ru-H bonding. Synergy between BP's charge-carrier properties and Ru's active sites boosted HER kinetics with an ultralow overpotential of 84 mV at 10 mA/cm2 in KOH. Additionally, the RuO2 || RuBP-2 electrolyzer demonstrated remarkable overall water splitting performance at ∼1.60 V at 10 mA/cm2. These results highlight the pivotal role of metal nanoclusters on exfoliated BP surfaces and offer a refined strategy for high-density electrocatalysts in energy conversion.

2D nanocomposite materials for HER electrocatalysts - a review

Hydrogen energy has the potential to be a cost-effective and strong technology for brighter development. Hydrogen fuel production by water electrolyzers has attracted attention. 2D nanocomposites with distinctive properties have been extensively explored for various applications from hydrogen evolution reactions to improving the efficiency of water electrolyzer, which is the most eco-friendly, and high-performance for hydrogen production. Recently, typical 2D nanocomposites such as Metal-Free 2D, TMDs, Mxene, LDH, organic composites, and Heterostructure have recently been thoroughly researched for use in the HER. We discuss effective ways for increasing the HER efficiency of 2D catalysts in this paper, And the unique advantages and mechanisms for specific applications are highlighted. Several essential regulating strategies for developing 2D nanocomposite-based HER electrocatalysts are included such as interface engineering, defect engineering, heteroatom doping, strain & phase engineering, and hybridizing which improve HER kinetics, the electrical conductivity, accessibility to catalytic active sites, and reaction energy barrier can be optimized. Finally, the future prospects for 2D nanocomposites in HER are discussed, as well as a thorough overview of a variety of methodologies for designing 2D nanocomposites as HER electrocatalysts with excellent catalytic performance. We expect that this review will provide a thorough overview of 2D nanocatalysts for hydrogen production.

Development of polyoxometalate-based Ag-H2biim inorganic-organic hybrid compounds functionalized for the acid electrocatalytic hydrogen evolution reaction

The electrocatalytic hydrogen evolution reaction (HER) is an ideal method for hydrogen production. Transition metal complex electrocatalysts exhibit poor HER activity due to excessive or weak adsorption of H during the electrochemical reduction of water to molecular hydrogen in acidic environments. Developing specific functional complex materials as desired catalysts is challenging. Here, an electrochemical surface restructuring strategy of polyoxometalate (POM)-modified Ag materials toward the HER with a dramatically decreased overpotential under acidic aqueous conditions is established. We prepared two POM [SiW12O40]4- (SiW12)/[P2W18O62]6- (P2W18)-based Ag-2,2'-biimidazole (H2biim) inorganic-organic hybrid compounds (1 and 2) via the hydrothermal method and these two compounds undergo an electrochemical restructuring process in 0.5 M H2SO4 during the HER, in which Ag nanoparticles are in situ formed with the basic structures of SiW12 and P2W18 being maintained. The activated catalysts (1-AC-RDE and 2-AC-RDE) exhibit good electrocatalytic activity for the HER with good long-term stability, and the required overpotentials at a current density of 10 mA cm-2 are 112 mV (1-AC-RDE) and 91 mV (2-AC-RDE) with Tafel slopes of 77 mV dec-1 and 65 mV dec-1, respectively. The excellent electron-proton storage and transferability of SiW12 and P2W18 may provide a solution for the insufficient capture of H by Ag, leading to an effective self-optimizing behavior and superior acidic HER activity.

IrMo Nanocluster-Doped Porous Carbon Electrocatalysts Derived from Cucurbit[6]uril Boost Efficient Alkaline Hydrogen Evolution

Electrocatalysts based on noble metals have been proven efficient for high-purity hydrogen production. However, the sluggish kinetics of the hydrogen evolution reaction (HER) in alkaline media caused by high water dissociation energy largely hampers this electrochemical process. To improve the electrocatalytic activity, we fabricate an effective porous carbon matrix derived from cucurbit[6]uril using a template-free method to support iridium-molybdenum (IrMo) nanoclusters. As proof of concept, the resulting IrMo-doped carbon electrocatalyst (IrMo-CBC) was found to boost the alkaline HER significantly. Owing to the unique in-plane hole structure and the nitrogen-rich backbone of cucurbit[6]uril as well as the ultrafine IrMo nanoclusters, IrMo-CBC exhibits pronounced alkaline HER activity with an extremely low overpotential of 12 mV at 10 mA cm^-2, an ultrasmall Tafel slope (28.06 mV dec^-1), a superior faradic efficiency (98%), and a TOF of 11.6 H₂ s^-1 at an overpotential of 50 mV, outperforming most iridium-based electrocatalysts and commercial Pt/C.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Alloying at a Subnanoscale Maximizes the Synergistic Effect on the Electrocatalytic Hydrogen Evolution

Bonding dissimilar elements to provide synergistic effects is an effective way to improve the performance of metal catalysts. However, as the properties become more dissimilar, achieving synergistic effects effectively becomes more difficult due to phase separation. Here we describe a comprehensive study on how subnanoscale alloying is always effective for inter-elemental synergy. Thirty-six combinations of both bimetallic subnanoparticles (SNPs) and nanoparticles (NPs) were studied systematically using atomic-resolution imaging and catalyst benchmarking based on the hydrogen evolution reaction (HER). Results revealed that SNPs always produce greater synergistic effects than NPs, the greatest synergistic effect was found for the combination of Pt and Zr. The atomic-scale miscibility and the associated modulation of electronic states at the subnanoscale were much different from those at the nanoscale, which was observed by annular-dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray photoelectron spectroscopy (XPS), respectively.

Tunable Structured MXenes With Modulated Atomic Environments: A Powerful New Platform for Electrocatalytic Energy Conversion

Owing to their rich surface chemistry, high conductivity, tunable bandgap, and thermal stability, structured 2D transition-metal carbides, nitrides, and carbonitrides (MXenes) with modulated atomic environments have emerged as efficient electrochemical energy conversion systems in the past decade. Herein, the most recent advances in the engineering of tunable structured MXenes as a powerful new platform for electrocatalytic energy conversion are comprehensively summarized. First, the state-of-the-art synthetic and processing methods, tunable nanostructures, electronic properties, and modulation principles of engineering MXene-derived nanoarchitectures are focused on. The current breakthroughs in the design of catalytic centers, atomic environments, and the corresponding structure-performance correlations, including termination engineering, heteroatom doping, defect engineering, heterojunctions, and alloying, are discussed. Furthermore, representative electrocatalytic applications of structured MXenes in energy conversion systems are also summarized. Finally, the challenges in and prospects for constructing MXene-based electrocatalytic materials are also discussed. This review provides a leading-edge understanding of the engineering of various MXene-based electrocatalysts and offers theoretical and experimental guidance for prospective studies, thereby promoting the practical applications of tunable structured MXenes in electrocatalytic energy conversion systems.

Unraveling the Electronic Effect of Transition-Metal Dopants (M = Fe, Co, Ni, and Cu) and Graphene Substrate on Platinum-Transition Metal Dimers for Hydrogen Evolution Reaction

As an extension of single-atom catalysts, despite the increased opportunities to optimize the hydrogen evolution reaction (HER) activity with the variation of the composition, dual-metal-atom catalysts, i.e., dimers, are deeply trapped in a design blind spot due to the lack of the essential recognition of the intrinsic catalytic mechanism at the atomic level. Herein, based on first-principles calculations, a series of platinum-transition metal dimers were constructed on nitrogen-doped graphene (PtM-NDG, M = Fe, Co, Ni, Cu) to reveal the effects of the internal (i.e., M atom) and external (i.e., NDG substrate) environments on the HER activity. Computational results show that the original over-adsorption of hydrogen intermediate (H*) of PtM dimer is weakened after the introduction of NDG, and the optimal active site migrates from the Pt in PtM dimer to the Pt-M bridge in PtM-NDG, triggered by the redistribution of the charge density of the metal atoms. In particular, the M atom switches from tuning the d-band center of the Pt atom to indirectly assist the adsorption behavior of Pt in the PtM dimer to the direct participation in the bonding with H* in PtM-NDG via its own d-band to regulate the distribution of σ and σ*, which enables fine modulation of the bond strength with H*. Moreover, the overall hydrogen evolution performance of PtM-NDG is mainly determined by the d-band center of the M atom. Furthermore, PtFe-NDG with the lowest energy barrier of the rate-determining step stands out in the process of H₂ desorption and water dissociation. The present work deepens our understanding of the effects of the metal dopant and substrate on the catalytic performance of platinum.

Anion-Exchange Membrane Water Electrolyzers

This Review provides an overview of the emerging concepts of catalysts, membranes, and membrane electrode assemblies (MEAs) for water electrolyzers with anion-exchange membranes (AEMs), also known as zero-gap alkaline water electrolyzers. Much of the recent progress is due to improvements in materials chemistry, MEA designs, and optimized operation conditions. Research on anion-exchange polymers (AEPs) has focused on the cationic head/backbone/side-chain structures and key properties such as ionic conductivity and alkaline stability. Several approaches, such as cross-linking, microphase, and organic/inorganic composites, have been proposed to improve the anion-exchange performance and the chemical and mechanical stability of AEMs. Numerous AEMs now exceed values of 0.1 S/cm (at 60-80 °C), although the stability specifically at temperatures exceeding 60 °C needs further enhancement. The oxygen evolution reaction (OER) is still a limiting factor. An analysis of thin-layer OER data suggests that NiFe-type catalysts have the highest activity. There is debate on the active-site mechanism of the NiFe catalysts, and their long-term stability needs to be understood. Addition of Co to NiFe increases the conductivity of these catalysts. The same analysis for the hydrogen evolution reaction (HER) shows carbon-supported Pt to be dominating, although PtNi alloys and clusters of Ni(OH)2 on Pt show competitive activities. Recent advances in forming and embedding well-dispersed Ru nanoparticles on functionalized high-surface-area carbon supports show promising HER activities. However, the stability of these catalysts under actual AEMWE operating conditions needs to be proven. The field is advancing rapidly but could benefit through the adaptation of new in situ techniques, standardized evaluation protocols for AEMWE conditions, and innovative catalyst-structure designs. Nevertheless, single AEM water electrolyzer cells have been operated for several thousand hours at temperatures and current densities as high as 60 °C and 1 A/cm2, respectively.

Fast and Deep Reconstruction of Coprecipitated Fe Phosphates on Nickel Foams for an Alkaline Oxygen Evolution Reaction

Although there is a general consensus that the electrocatalysts will undergo reconstruction to generate (oxy)hydroxides as real active sites during the electrochemical oxygen evolution reaction (OER), the understanding of this process is still far from satisfactory. In particular, the reconstruction process of most of these electrocatalysts is either slow or occurs only on the surface, which thus restrains the OER performance of the electrocatalysts. Herein, we reveal a fast and deep reconstruction of the coprecipitated Fe phosphates on nickel foam, via in situ Raman spectroscopy together with electron microscopy, X-ray photoelectron spectroscopy, and electrochemical tests. The generated NiFe (oxy)hydroxide nanosheets after reconstruction behave as the real active sites for the OER in the alkaline condition, with a low overpotential and excellent durability. The present work provides deep insights on the reconstruction dynamics of OER electrocatalysts.

Emerging 2D Materials for Electrocatalytic Applications: Synthesis, Multifaceted Nanostructures, and Catalytic Center Design

Currently, the development of advanced 2D nanomaterials has become an interdisciplinary subject with extensive studies due to their extraordinary physicochemical performances. Beyond graphene, the emerging 2D-material-derived electrocatalysts (2D-ECs) have aroused great attention as one of the best candidates for heterogeneous electrocatalysis. The tunable physicochemical compositions and characteristics of 2D-ECs enable rational structural engineering at the molecular/atomic levels to meet the requirements of different catalytic applications. Due to the lack of instructive and comprehensive reviews, here, the most recent advances in the nanostructure and catalytic center design and the corresponding structure-function relationships of emerging 2D-ECs are systematically summarized. First, the synthetic pathways and state-of-the-art strategies in the multifaceted structural engineering and catalytic center design of 2D-ECs to promote their electrocatalytic activities, such as size and thickness, phase and strain engineering, heterojunctions, heteroatom doping, and defect engineering, are emphasized. Then, the representative applications of 2D-ECs in electrocatalytic fields are depicted and summarized in detail. Finally, the current breakthroughs and primary challenges are highlighted and future directions to guide the perspectives for developing 2D-ECs as highly efficient electrocatalytic nanoplatforms are clarified. This review provides a comprehensive understanding to engineer 2D-ECs and may inspire many novel attempts and new catalytic applications across broad fields.

Tuning the Electronic Structure of the CoP/Ni2P Nanostructure by Nitrogen Doping for an Efficient Hydrogen Evolution Reaction in Alkaline Media

As one of the most sustainable, efficient, and cleanest ways for hydrogen production, electrochemical water splitting relies heavily on cost-efficient and stable electrocatalysts. Herein, a self-supported and nitrogen-doped hybrid CoP/Ni₂P was synthesized through a simple two-step hydrothermal process followed by low-temperature phosphorization and nitridation (N-CoP/Ni₂P@NF). Both experimental and density functional theory calculation results suggest that nitrogen doping can tune the electrical structure of the CoP/Ni₂P heterostructure and thus optimize the free energy of adsorbed H on the surface of N-CoP/Ni₂P@NF and accelerate the electronic transport activity. The prepared N-CoP/Ni₂P@NF exhibits excellent electrocatalytic hydrogen evolution reaction (HER) performance, which merely requires an overpotential of -46 mV at -10 mA cm^-2 and shows a negligible decay after a long durability test for 72 h in alkaline (1.0 M KOH) media. Consequently, this work supplies a novel strategy with great potential for designing transition metal phosphate-based catalysts with high HER performance.

Freestanding Surface Disordered NiCu Solid Solution as Ultrastable High Current Density Hydrogen Evolution Reaction Electrode

The poor performance of conventional powdery catalysts under large current density and the slow kinetics of the Volmer step limit the large-scale application of alkaline hydrogen generation. Here, we report the preparation of freestanding surface disordered NiCu solid solution as an ultrastable hydrogen evolution reaction electrode. The introduction of ammonium ion could tailor the reduction/nucleation rate of metal ions during the hydrothermal process, thus contributing to its unique intertwined 3D microstructure. The catalyst exhibits superior HER activity with an overpotential of 322 mV at 1000 mA cm^-2, and limited degradation after 110 h continuous operation at 1000 mA cm^-2. Density functional theory calculations confirm that the substitution of Cu could accelerate the hydroxyl desorption process (OH_ads + e^- → OH^-) and thereby enhance the overall kinetics of the Volmer step. Our work demonstrates the strong efficacy of optimizing catalysts' structures and facilitating intermediate desorption for boosting industrial-scale alkaline HER performance.

Devising a Polyoxometalate-Based Functional Material as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Hydrogen is the solution to all the problems associated with the energy crisis. Generating hydrogen from water splitting is one of the greener approaches, but it requires an efficient catalyst that is economical for the bulk production of hydrogen. The transition metal-aqua coordination complexes, which are otherwise inactive/unstable for electrochemical hydrogen evolution reaction (HER) activity, can efficiently be utilized for the same by attaching these metal-aqua species on a stable support. With a similar approach, we have synthesized and structurally characterized a two-dimensional polyoxometalate (POM)-copper complex hybrid that supports a copper(II)-aqua-bypyridine complex with a molecular formula of the overall system, [{Cu^II(2,2'-bpy)(H₂O)₂}][{Co^IIW^VI₁₂O₄₀}{Cu^II(2,2'-bpy)(H₂O)}{Cu^II(2,2'-bpy)}]·2H₂O (1). The bis(aqua)-mono(bipyridine) Cu(II)-complex fragment {Cu^II(2,2'-bpy)(H₂O)₂}²⁺, attached to the two-dimensional POM-Cu-complex support, acts as an active catalytic center that catalyzes the electrochemical HER. The electrochemical studies done for this work enabled us to understand the role of compound 1 as an electrocatalyst for the HER in near-neutral medium (pH 4.8), under buffered conditions (acetate buffer). Through detailed electrochemical experiments including controlled ones, we understand that compound 1 follows a proton-coupled electron transfer (PCET) pathway with one proton and one electron involvement in the HER. The overpotential required to achieve a current density of 1 mA/cm² is found to be 520 mV with a Faradaic efficiency of 81%.

Strong electrostatic adsorption-engaged fabrication of sub-3.0 nm PtRu alloy nanoparticles as synergistic electrocatalysts toward hydrogen evolution

Alloying of Pt with Ru to form ultrafine and well-defined PtRu alloy nanoparticles (NPs) for synergistically electrocatalytic hydrogen evolution is highly desirable but remains a synthetic challenge. Here, we report a strong electrostatic adsorption (SEA)-assisted fabrication of ultrafine and homogeneously distributed PtRu alloy NPs using ethylenediaminetetraacetic acid tetrasodium-derived carbon (EC) as a matrix. The O, N-rich EC with a hierarchically macro/meso/microporous structure and the SEA-assisted formation of the [Ru(bpy)₃][PtCl₆] complex ensure the successful generation of ultrasmall PtRu alloy NPs (2.93 nm in diameter) with high dispersion. The optimal PtRu/EC-700 delivers excellent electrocatalytic properties with an ultralow overpotential (η₁₀ = 18 mV), robust durability and good long-term stability for the alkaline hydrogen evolution reaction (HER). The ultrasmall PtRu alloy NPs with rich surface sites, the synergistic catalysis effect between Pt and Ru and the hierarchically macro/meso/microporous structure of O, N-rich EC cooperatively enhance the HER performance of PtRu/EC-700. This study provides an easy but effective way to construct metal alloy NPs with an ultrafine size and high dispersity for catalytic applications.

Enhanced electrocatalytic activity of PtRu/nitrogen and sulphur co-doped crumbled graphene in acid and alkaline media

The low mass activity and high price of pure platinum (Pt)-based catalysts predominantly limit their large-scale utilization in electrocatalysis. Therefore, the reduction of Pt amount while preserving the electrocatalytic efficiency represents a viable alternative. In this work, we prepared new PtRu₂ nanoparticles supported on sulphur and nitrogen co-doped crumbled graphene with trace amounts of iron (PtRu₂/PF) electrocatalysts. The PtRu₂/PF catalysts exhibited enhanced electrocatalytic performance and stability for the hydrogen evolution reaction (HER) at pH = 0. Moreover, the prepared PtRu₂/PF electrocatalyst displayed higher HER activity than commercial 20% Pt/C. The PtRu₂/PF catalyst achieved a current density of 10 mA cm^-2 at an overpotential value of only 22 mV for HER, performing better activity than many other Pt-based electrocatalysts. Besides, the PtRu₂/PF revealed a good performance for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline media. The PtRu₂/PF catalyst recorded a current density of 10 mA cm^-2 at an overpotential of only 270 mV for OER in KOH (1.0 M) solution and an onset potential of 0.96 V vs. RHE (at 1 mA cm^-2) for ORR in KOH (0.1 M) solution.

2D phosphorene nanosheets, quantum dots, nanoribbons: synthesis and biomedical applications

Phosphorene, also known as black phosphorus (BP), is a two-dimensional (2D) material that has gained significant attention in several areas of current research. Its unique properties such as outstanding surface activity, an adjustable bandgap width, favorable on/off current ratios, infrared-light responsiveness, good biocompatibility, and fast biodegradation differentiate this material from other two-dimensional materials. The application of BP in the biomedical field has been rapidly emerging over the past few years. This article aimed to provide a comprehensive review of the recent progress on the unique properties and extensive medical applications for BP in bone, nerve, skin, kidney, cancer, and biosensing related treatment. The details of applications of BP in these fields were summarized and discussed.

Mesoporous RhRu Nanosponges with Enhanced Water Dissociation toward Efficient Alkaline Hydrogen Evolution

Lowering the energy barrier of water dissociation is critical to achieving highly efficient hydrogen evolution in alkaline conditions. Herein, we reported mesoporous RhRu nanosponges with enhanced water dissociation behavior as a new class of high-performance electrocatalysts for alkaline hydrogen evolution reaction (HER). The obtained nanosponges have a binary alloy structure (fcc) and a highly porous structure with high surface area. Our RhRu catalyst displayed an outstanding HER activity with an overpotential of 25 mV at 10 mA cm^-2 and a Tafel slope of 47.5 mV dec^-1 in 1.0 M KOH, which significantly outperformed that of commercial Pt/C catalyst and was even comparable to the classic Pt/metal (hydro)oxide catalysts. Density functional theory (DFT) calculations disclosed that charge redistribution on the RhRu alloy surface enabled tuning of the Ru d-band center and then promoted the adsorption and dissociation of water molecules. Based on the experimental results and theoretical modeling, a bifunctional mechanism contributed to the remarkable alkaline HER activity on the RhRu catalyst surface.

Interface engineering of heterostructured electrocatalysts towards efficient alkaline hydrogen electrocatalysis

Boosting the alkaline hydrogen evolution and oxidation reaction (HER/HOR) kinetics is vital to practicing the renewable hydrogen cycle in alkaline media. Recently, intensive research has demonstrated that interface engineering is of critical significance for improving the performance of heterostructured electrocatalysts particularly toward the electrochemical reactions involving multiple reaction intermediates like alkaline hydrogen electrocatalysis, and the research advances also bring substantial non-trivial fundamental insights accordingly. Herein, we review the current status of interface engineering with respect to developing efficient heterostructured electrocatalysts for alkaline HER and HOR. Two major subjects-how interface engineering promotes the reaction kinetics and what fundamental insights interface engineering has brought into alkaline HER and HOR-are discussed. Specifically, heterostructured electrocatalysts with abundant interfaces have shown substantially accelerated alkaline hydrogen electrocatalysis kinetics owing to the synergistic effect from different components, which could balance the adsorption/desorption behaviors of the intermediates at the interfaces. Meanwhile, interface engineering can effectively tune the electronic structures of the active sites via electronic interaction, interfacial bonding, and lattice strain, which would appropriately optimize the binding energy of targeted intermediates like hydrogen. Furthermore, the confinement effect is critical for delivering high durability by sustaining high density of active sites. At last, our own perspectives on the challenges and opportunities toward developing efficient heterostructured electrocatalysts for alkaline hydrogen electrocatalysis are provided.

Co(OH)2 Nanosheets Supported on Laser Ablated Cu Foam: An Efficient Oxygen Evolution Reaction Electrocatalyst

Highly efficient and low-cost non-noble metal based electrocatalysts for oxygen evolution reaction (OER) have attracted more and more attention in recent years. However, the current research has been focused on the construction of novel OER electrocatalysts themselves, little attention has been paid to the modification of the substrates. In this work, a different strategy is proposed via laser ablation to fabricate the Cu foams with rich micro/nano-structures as OER substrates. Later, the precipitation conversion method was utilized to grow cobalt hydroxide on the laser fabricated Cu foams. The as-produced Cu/Cu oxides/Co(OH)₂ electrocatalysts exhibit high OER activity in 1 M KOH, requiring an overpotential of only 259 mV at a current density of 50 mA cm^-2 with excellent mild-term durability. The improved catalytic performance of the prepared samples can be attributed to the increased surface area, rich active sites, and the superhydrophilicity of the laser produced micro/nano-structures.