In Situ Generation of the Cu@3D-ZrOx Framework Catalyst for Selective Methanol Synthesis from CO2/H2

Mo4+-Doped CuS Nanosheet-Assembled Hollow Spheres for CO2 Electroreduction to Ethanol in a Flow Cell

Electrocatalytic CO2 reduction reaction (CO2RR) to ethanol has been widely researched for potential commercial application. However, it still faces limited selectivity at a large current density. Herein, Mo4+-doped CuS nanosheet-assembled hollow spheres are constructed to address this issue. Mo4+ ion doping modifies the local electronic environments and diversifies the binding sites of CuS, which increases the coverage of linear *COL and produces bridge *COB for subsequent *COL-*COH coupling toward ethanol production. The optimal Mo9.0%-CuS can electrocatalyze CO2 to ethanol with a faradaic efficiency of 67.5% and a partial current density of 186.5 mA cm-2 at -0.6 V in a flow cell. This work clarifies that doping high valence transition metal ions into Cu-based sulfides can regulate the coverage and configuration of related intermediates for ethanol production during the CO2RR in a flow cell.

Enhanced Proximity of Rh1,2-Rhn Ensembles Encaged in UiO-67 Boosting Catalytic Conversion of Syngas to Oxygenates

Maintaining high conversion under the premise of high oxygenates selectivity in syngas conversion is important but a formidable challenge in Rh catalysis. Monometallic Rh catalysts provide poor oxygenate conversion efficiency, and efforts have been focused on constructing adjacent polymetallic sites; however, the one-pass yields of C2+ oxygenates over the reported Rh-based catalysts were mostly <20 %. In this study, we constructed a monometallic Rh catalyst encapsulated in UiO-67 (Rh/UiO-67) with enhanced proximity to dual-site Rh1,2-Rhn ensembles. Unexpectedly, this catalyst exhibited high efficacy for oxygenate synthesis from syngas, giving a high oxygenate selectivity of 72.0 % with a remarkable CO conversion of 50.4 %, and the one-pass yield of C2+ oxygenates exceeded 25 %. The state-of-the-art characterizations further revealed the spontaneous formation of an ensemble of Rh single atoms/dimers (Rh1,2) in the proximity of ultrasmall Rh clusters (Rhn) confined within the nanocavity of UiO-67, providing adjacent Rh+-Rh0 dual sites dynamically during the reaction that promote the relay of the undissociated CHO species to the CHx species. Thus, our results open a new route for designing highly efficient Rh catalysts for the conversion of syngas to oxygenates by precisely tuning the ensemble and proximity of the dual active sites in a confined space.

DFT Study of Functional Reduction of CO2 with BH3NMe3: The Real Role of Organic Catalyst TBD

The detailed mechanism of transition metal-free-catalyzed monomethylation of 2-naphthyl acetonitrile (1a) with CO2 in the presence of triazabicyclodecene (TBD) and BH3NMe3 was investigated using density functional theory. The C-methylation process proved to generate formaldehyde followed by the formation of the product via an alcohol rather than a methoxyborane intermediate. During the reaction, CO2 is activated to form the TBD-CO2 adduct and BH3NMe3 is changed into TBD-BH2 (IM2) in the presence of TBD. IM2 plays a real reducing role within the system due to the unique coordination capability of the B atom. In addition to enhancing the nucleophilicity of 1a through deprotonation by tBuOK, our research also indicates that the generated tBuOH not only assists in proton transfer to generate an alcohol intermediate but also promotes the regeneration of TBD.

Unlocking a Dual-Channel Pathway in CO2 Hydrogenation to Methanol over Single-Site Zirconium on Amorphous Silica

Converting CO2 into methanol on a large scale is of great significance in the sustainable methanol economy. Zirconia species are considered to be an essential support in Cu-based catalysts due to their excellent properties for CO2 adsorption and activation. However, the evolution of Zr species during the reaction and the effect of their structure on the reaction pathways remain unclear. Herein, single-site Zr species in an amorphous SiO2 matrix are created by enhancing the Zr-Si interaction in Cu/ZrO2 -SiO2 catalysts. In situ X-ray absorption spectroscopy (XAS) reveals that the coordination environment of single-site Zr is sensitive to the atmosphere and reaction conditions. We demonstrate that the CO2 adsorption occurs preferably on the interface of Cu and single-site Zr rather than on ZrO2 nanoparticles. Methanol synthesis in reverse water-gas-shift (RWGS)+CO-hydro pathway is verified only over single-dispersed Zr sites, whereas the ordinary formate pathway occurs on ZrO2 nanoparticles. Thus, it expands a non-competitive parallel pathway as a supplement to the dominant formate pathway, resulting in the enhancement of Cu activity sixfold and twofold based on Cu/SiO2 and Cu/ZrO2 catalysts, respectively. The establishment of this dual-channel pathway by single-site Zr species in this work opens new horizons for understanding the role of atomically dispersed oxides in catalysis science.

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

Probing the Nature of Zinc in Copper-Zinc-Zirconium Catalysts by Operando Spectroscopies for CO2 Hydrogenation to Methanol

Active Zn species in Cu-based methanol synthesis catalysts have not been clearly identified yet due to their complex nature and dynamic structural changes during reactions. Herein, atomically dispersed Zn on ZrO₂ support is established in Cu-based catalysts by separating Zn and Zr components from Cu (Cu-ZnZr) via the double-nozzle flame spray pyrolysis (DFSP) method. It exhibits superiority in methanol selectivity and yield compared to those with Cu-ZnO interface and isolated ZnO nanoparticles. Operando X-ray absorption spectroscopy (XAS) reveals that the atomically dispersed Zn species are induced during the reaction due to the strengthened Zn-Zr interaction. They can suppress formate decomposition to CO and decrease the H₂ dissociation energy, shifting the reaction to methanol production. This work enlightens the rational design of unique Zn species by regulating coordination environments and offers a new perspective for exploring complex interactions in multi-component catalysts.

Engineering Heterogeneous Catalysis with Strong Metal-Support Interactions: Characterization, Theory and Manipulation

Strong metal-support interactions (SMSI) represent a classic yet fast-growing area in catalysis research. The SMSI phenomenon results in the encapsulation and stabilization of metal nanoparticles (NPs) with the support material that significantly impacts the catalytic performance through regulation of the interfacial interactions. Engineering SMSI provides a promising approach to steer catalytic performance in various chemical processes, which serves as an effective tool to tackle energy and environmental challenges. Our Minireview covers characterization, theory, catalytic activity, dependence on the catalytic structure and inducing environment of SMSI phenomena. By providing an overview and outlook on the cutting-edge techniques in this multidisciplinary research field, we not only want to provide insights into the further exploitation of SMSI in catalysis, but we also hope to inspire rational designs and characterization in the broad field of material science and physical chemistry.

Hybrid MOF Template-Directed Construction of Hollow-Structured In2 O3 @ZrO2 Heterostructure for Enhancing Hydrogenation of CO2 to Methanol

Direct hydrogenation of CO₂  to methanol using green hydrogen has emerged as a promising method for carbon neutrality, but qualifying catalysts represent a grand challenge. In₂ O₃ /ZrO₂  catalyst has been extensively applied in methanol synthesis due to its superior activity; however, the electronic effect by strong oxides-support interactions between In₂ O₃  and ZrO₂  at the In₂ O₃ /ZrO₂  interface is poorly understood. In this work, abundant In₂ O₃ /ZrO₂  heterointerfaces are engineered in a hollow-structured In₂ O₃ @ZrO₂  heterostructure through a facile pyrolysis of a hybrid metal-organic framework precursor MIL-68@UiO-66. Owing to well-defined In₂ O₃ /ZrO₂  heterointerfaces, the resultant In₂ O₃ @ZrO₂  exhibits superior activity and stability toward CO₂  hydrogenation to methanol, which can afford a high methanol selectivity of 84.6% at a conversion of 10.4% at 290 °C, and 3.0 MPa with a methanol space-time yield of up to 0.29 g_MeOH  g_cat ^-1  h^-1 . Extensive characterization demonstrates that there is a strong correlation between the strong electronic In₂ O₃ -ZrO₂  interaction and catalytic selectivity. At In₂ O₃ /ZrO₂  heterointerfaces, the electron tends to transfer from ZrO₂  to In₂ O₃  surface, which facilitates H₂  dissociation and the hydrogenation of formate (HCOO*) and methoxy (CH₃ O*) species to methanol. This study provides an insight into the In₂ O₃ -based catalysts and offers appealing opportunities for developing heterostructured CO₂  hydrogenation catalysts with excellent activity.

A Review on Green Hydrogen Valorization by Heterogeneous Catalytic Hydrogenation of Captured CO2 into Value-Added Products

The catalytic hydrogenation of captured CO2 by different industrial processes allows obtaining liquid biofuels and some chemical products that not only present the interest of being obtained from a very low-cost raw material (CO2) that indeed constitutes an environmental pollution problem but also constitute an energy vector, which can facilitate the storage and transport of very diverse renewable energies. Thus, the combined use of green H2 and captured CO2 to obtain chemical products and biofuels has become attractive for different processes such as power-to-liquids (P2L) and power-to-gas (P2G), which use any renewable power to convert carbon dioxide and water into value-added, synthetic renewable E-fuels and renewable platform molecules, also contributing in an important way to CO2 mitigation. In this regard, there has been an extraordinary increase in the study of supported metal catalysts capable of converting CO2 into synthetic natural gas, according to the Sabatier reaction, or in dimethyl ether, as in power-to-gas processes, as well as in liquid hydrocarbons by the Fischer-Tropsch process, and especially in producing methanol by P2L processes. As a result, the current review aims to provide an overall picture of the most recent research, focusing on the last five years, when research in this field has increased dramatically.

Quasi-In Situ Synthesis of Ag NPs@m-MIL-100(Fe) for the Enhanced Photocatalytic Elimination of Flowing Xylenes

The implantation of metal nanoparticles (MNPs) into metal-organic framework (MOF) hosts is a promising means to prepare high-performance photocatalysts for the degradation of gas pollutants. However, the uniform encapsulation of MNPs in MOFs is still challenging. Herein, a facile "quasi-in situ" encapsulation method is proposed by utilizing the spatial confinement effect of the colloidal network formed during the synthesis of the MIL-100(Fe) monolith [noted as m-MIL-100(Fe)]. Highly dispersed Ag NPs with an average diameter of ∼2 nm are encapsulated in the MIL-100(Fe) monolith to form a unique "watermelon-seed" structure, which ensures the large contact area between the two components and protects Ag NPs from being oxidized. The fast charge transfer between m-MIL-100(Fe) and Ag NPs enables the spatial separation of electron-hole pairs and promotes the generation of oxidative radicals. Compared with pristine m-MIL-100(Fe), the 0.2 wt % Ag@m-MIL-100(Fe) composite shows obviously enhanced photodegradation efficiencies for flowing o-xylene under both xenon (∼97%) and visible light (∼80.0%) with high stability. This work not only provides a promising Ag@m-MIL-100(Fe) material for eliminating air pollutants but also gives a versatile means for the design and synthesis of nanoparticles@MOFs composites with desired performance.

Ga-Promoted CuCo-Based Catalysts for Efficient CO2 Hydrogenation to Ethanol: The Key Synergistic Role of Cu-CoGaOx Interfacial Sites

Currently, direct catalytic CO₂ hydrogenation to produce ethanol is an effective and feasible way for the resource utilization of CO₂. However, constructing non-precious metal catalysts with satisfactory activity and desirable ethanol selectivity remains a huge challenge. Herein, we reported gallium-promoted CuCo-based catalysts derived from single-source Cu-Co-Ga-Al layered double hydroxide precursors. It was manifested that the introduction of Ga species could strengthen strong interactions between Cu and Co oxide species, thereby modifying their electronic structures and thus facilitating the formation of abundant metal-oxide interfaces (i.e., Cu⁰/Cu⁺-CoGaO_x interfaces). Notably, the as-constructed Cu-CoGa catalyst with a Ga:Co molar ratio of 0.4 exhibited a high ethanol selectivity of 23.8% at a 17.8% conversion, along with a high space-time yield of 1.35 mmol_EtOH·g_cat^-1·h^-1 for ethanol under mild reaction conditions (i.e., 220 °C, 3 MPa pressure), which outperformed most non-noble metal-based catalysts previously reported. According to the comprehensive structural characterizations and in situ diffuse reflectance infrared Fourier transform spectra of CO₂/CO adsorption and CO₂ hydrogenation, it was unambiguously revealed that CH_x could be formed at oxygen vacancies of defective CoGaO_x species, while CO could be stabilized by Cu⁺ species, and thus the catalytic synergistic role of Cu⁰/Cu⁺-CoGaO_x interfacial sites promoted the generation of CH_x and CO intermediates to participate in the CH_x-CO coupling process and simultaneously inhibited alkylation reactions. The present work points out a promising new strategy for constructing CuCo-based catalysts with favorable interfacial sites for highly efficient CO₂ hydrogenation to produce ethanol.

CO2 Hydrogenation on Metal-Organic Frameworks-Based Catalysts: A Mini Review

Conversion of carbon dioxide (CO₂) into value-added fuels and chemicals can not only reduce the emission amount of CO₂ in the atmosphere and alleviate the greenhouse effect but also realize carbon recycling. Through hydrogenation with renewable hydrogen (H₂), CO₂ can be transformed into various hydrocarbons and oxygenates, including methanol, ethanol, methane and light olefins, etc. Recently, metal-organic frameworks (MOFs) have attracted extensive attention in the fields of adsorption, gas separation, and catalysis due to their high surface area, abundant metal sites, and tunable metal-support interface interaction. In CO₂ hydrogenation, MOFs are regarded as important supports or sacrificed precursors for the preparation of high-efficient catalysts, which can uniformly disperse metal nanoparticles (NPs) and enhance the interaction between metal and support to prevent sintering and aggregation of active metal species. This work summarizes the recent process on hydrogenation of CO₂ to methanol, methane and other C₂₊ products over various MOFs-based catalysts, and it will provide some dues for the design of MOFs materials in energy-efficient conversion and utilization.

Efficient Role of Nanosheet-Like Pr2O3 Induced Surface-Interface Synergistic Structures over Cu-Based Catalysts for Enhanced Methanol Production from CO2 Hydrogenation

In a complex heterogeneous metal-catalyzed reaction process, unique cooperative effects between metal sites and surface-interface active sites, as well as favorable synergy between surface-interface active sites, can play crucial roles in improving their catalytic performances. In this work, a ZnO-modified Cu-based catalyst over defect-rich Pr₂O₃ nanosheets for high-efficiency CO₂ hydrogenation to produce methanol was successfully constructed. It was demonstrated that an as-fabricated nanosheet-like Cu-based catalyst presented several structural advantages including the formation of highly dispersive Cu⁰ sites and the coexistence of abundant defective Pr³⁺-V_o-Pr³⁺ structures (V_o: oxygen vacancy) and interfacial Cu-O-Pr sites. Combining structural characterization and catalytic reaction results with density functional theory calculations, it was clearly unveiled that the synergy between surface defective structures and Cu-Pr₂O₃ interfaces over the catalyst remarkably promoted the adsorption of CO₂ and CO intermediate, thus boosting the CO₂ hydrogenation simultaneously via both the formate intermediate pathway and the intense reverse water-gas shift reaction-derived CO hydrogenation pathway, along with a high space-time yield of methanol of 0.395 g_MeOH·g_cat^-1·h^-1 under mild reaction conditions (260 °C and 3.0 MPa). The study provides a new strategy to construct high-performance Cu-based catalysts for high-efficiency CO₂ hydrogenation to produce methanol and a deep understanding of the promotional roles of synergy between surface-interface active sites in the CO₂ hydrogenation.

Synergetic effect of metal–support for enhanced performance of the Cu–ZnO–ZrO2/UGSO catalyst for CO2 hydrogenation to methanol

Novel Cu–ZnO–ZrO2/UGSO catalysts for CO2 hydrogenation to methanol were developed using a metallurgical residue as catalytic support, focusing on (i) the synergy of Cu/Zn/Zr and UGSO composition and (ii) UGSO modification, on catalytic activity and stability.

Synthesis of durene by methylation of 1,2,4-trimethylbenzene with syngas over bifunctional CuZnZrOx–HZSM-5 catalysts

1,2,4,5-Tetramethylbenzene (durene) is a value-added aromatic used in producing high-end polyesters. The known synthesis routes of durene by 1,2,4-trimethylbenzene (1,2,4-TriMB) methylation with methanol or direct conversion from syngas suffer from...

Effect of calcination temperature on the Cu–ZrO2 interfacial structure and its catalytic behavior in the hydrogenation of dimethyl oxalate

The 5 wt% Cu/ZrO2 catalysts showed satisfying performance in DMO hydrogenation to EG via simply tuning the calcination temperature. The synergistic effect of the Cu0–Cu+–ZrO2 interface in activating H2 molecules and carbonyl bonds was elucidated.

Three Polyoxovanadates-Based Organic-Inorganic Hybrids: Structural Variation, Bifunctional Electrocatalytic Activities, and Computational Studies

Three bimetallic organic-inorganic hybrids based on the [V₂O₆]^2- building unit, [Cu(pty)(V₂O₆)]·H₂O (1), [Cu(pty)(V₂O₆)] (2), [Cu(tpy)(V₂O₆)] (3), (pty = 4'-(4″-pyridyl)-2,2':6',2″-terpyridine, tpy = 2,2':6',2″-terpyridine), were synthesized via a one-pot method. Hybrid 1 has a 1D straight chain architecture with [V₂O₆]^2- clusters and Cu-pty complexes; hybrids 2 and 3 possess a 2D sheet structure including 10-membered rings assembled from four [Cu(pty)]²⁺ motifs and six [V₂O₆]^2- clusters in 2, and two [Cu(tpy)]²⁺ units and eight [V₂O₆]^2- clusters in 3. Noteworthy, hybrids 1-3 can be employed as bifunctional electrocatalysts for electroreduction of nitrite and electrooxidation of ascorbic acid. Additionally, theoretical calculations including the molecular electrostatic potential and the frontier molecular orbital were performed to estimate the electronic structure of hybrids 1-3. The natural bond orbital analysis was also calculated to interpret the electron charge distribution.

MOF-derived zirconia-supported Keggin heteropoly acid nanoporous hybrids as a reusable catalyst for methyl oleate production

In this study, a series of nanoporous HSiW@ZrO2 hybrids were synthesized using a zirconium metal-organic framework UiO-66 as a precursor towards biodiesel production. The structural and morphological properties of the obtained hybrids were characterized by the wide-angle XRD, FTIR, SEM, TEM, N2 adsorption/desorption, and NH3-TPD methods. Moreover, their catalytic activity in terms of calcination temperature during preparation was investigated, and the HSiW@ZrO2 hybrids calcinated at 300 °C exhibited the highest activity and the oleic acid (OA) conversion of 94.0% owing to the presence of the relatively high surface area, appropriate pore size and strong acidity. It was also revealed that the hybrids maintained as high as 82.0% even after nine cycles. Intriguingly, the nanoporous catalysts were found to exhibit excellent catalytic activity towards the esterification of the high acid value of Jatropha curcas oil.

Flame-made Cu/ZrO2 catalysts with metastable phase and strengthened interactions for CO2 hydrogenation to methanol

Facile synthesis of a highly efficient Cu/ZrO2 catalyst by a flame spray pyrolysis (FSP) method was developed for methanol production from CO2 hydrogenation. The instantaneous quenching process from extremely high temperature in FSP was used for rational design of a Cu/ZrO2 catalyst, not only producing the metastable tetragonal phase ZrO2, but also strengthening the metal-support interaction. The methanol yield of one-step synthesized FSP-Cu/ZrO2 was 3 times higher than the one made by the traditional method. This strategy is anticipated to pave the way for strengthening metal-support interactions of supported catalysts.

Novel Heterogeneous Catalysts for CO2 Hydrogenation to Liquid Fuels

Carbon dioxide (CO₂) hydrogenation to liquid fuels including gasoline, jet fuel, diesel, methanol, ethanol, and other higher alcohols via heterogeneous catalysis, using renewable energy, not only effectively alleviates environmental problems caused by massive CO₂ emissions, but also reduces our excessive dependence on fossil fuels. In this Outlook, we review the latest development in the design of novel and very promising heterogeneous catalysts for direct CO₂ hydrogenation to methanol, liquid hydrocarbons, and higher alcohols. Compared with methanol production, the synthesis of products with two or more carbons (C₂₊) faces greater challenges. Highly efficient synthesis of C₂₊ products from CO₂ hydrogenation can be achieved by a reaction coupling strategy that first converts CO₂ to carbon monoxide or methanol and then conducts a C-C coupling reaction over a bifunctional/multifunctional catalyst. Apart from the catalytic performance, unique catalyst design ideas, and structure-performance relationship, we also discuss current challenges in catalyst development and perspectives for industrial applications.