Quasi-In Situ Synthesis of Ag NPs@m-MIL-100(Fe) for the Enhanced Photocatalytic Elimination of Flowing Xylenes

The implantation of metal nanoparticles (MNPs) into metal-organic framework (MOF) hosts is a promising means to prepare high-performance photocatalysts for the degradation of gas pollutants. However, the uniform encapsulation of MNPs in MOFs is still challenging. Herein, a facile "quasi-in situ" encapsulation method is proposed by utilizing the spatial confinement effect of the colloidal network formed during the synthesis of the MIL-100(Fe) monolith [noted as m-MIL-100(Fe)]. Highly dispersed Ag NPs with an average diameter of ∼2 nm are encapsulated in the MIL-100(Fe) monolith to form a unique "watermelon-seed" structure, which ensures the large contact area between the two components and protects Ag NPs from being oxidized. The fast charge transfer between m-MIL-100(Fe) and Ag NPs enables the spatial separation of electron-hole pairs and promotes the generation of oxidative radicals. Compared with pristine m-MIL-100(Fe), the 0.2 wt % Ag@m-MIL-100(Fe) composite shows obviously enhanced photodegradation efficiencies for flowing o-xylene under both xenon (∼97%) and visible light (∼80.0%) with high stability. This work not only provides a promising Ag@m-MIL-100(Fe) material for eliminating air pollutants but also gives a versatile means for the design and synthesis of nanoparticles@MOFs composites with desired performance.

Separation of Aromatic Hydrocarbons in Porous Materials

Industrial-scale thermal separation processes have contributed greatly to the rise in carbon dioxide emissions. Porous materials, such as metal-organic frameworks (MOFs), can potentially reduce these emissions by achieving nonthermal chemical separations through the physical adsorption of targeted species with high selectivity. Here, we report the synthesis of the channel-based MOFs NU-2000 and NU-2001, which are constructed from three-dimensional (3D) linkers, to separate the industrially relevant xylene isomers under ambient conditions by leveraging sub-Ångstrom differences in the sizes of each isomer. While the rotation of two-dimensional (2D) linkers in MOFs often affords changes in pore apertures and pore sizes that are substantial enough to hinder separation efficiency, increasing the linker dimensionality from 2D to three-dimensional (3D) enables precise control of the MOF pore size and aperture regardless of the linker orientation, establishing this design principle as a broadly applicable strategy.

Risk Assessment of Ambient Air Pollutants and Health Impact around Fuel Stations in Urban Cities of KSA

Background:

In Saudi Arabia, fuel dispensing facilities commonly present around the residential places, educational institutions, and various health care facilities. Fuel pollutants such as benzene, toluene, and xylenes (BTX) and its alkyl derivatives are harmful to human health because of their toxic, mutagenic, or carcinogenic properties. The aim of this study was to determine the BTX concentration levels of common pollutants in and around fuel stations and their harmful health effects in the urban cites of KSA.

Methods:

Forty fuel dispensing facilities were randomly selected on the basis of three different areas: residential, traffic intersection, and petrol pump locations (refueling stations). Portable ambient analyzer was used for measuring BTX concentration. t-test was applied to determine the difference between these different areas.

Results:

All mean concentration values of pollutants such as BTX around residential, traffic intersection, and fuel stations are exceeding the limits of air quality standards values (P < 0.01). The mean levels of benzene are 10.3 and 11.07 ppm in Dammam and Khobar, respectively, and they exceed the reference level of 0.5 ppm. Hazard quotient was more than >1, which shows that carcinogenic probability has increased those who were living and working near fuel stations.

Conclusions:

The results found that the high concentration of pollutants (BTX) is in the environment around fuel stations. The environmental contamination associated with BTX in petrol fuel stations impulses the necessity of preventive programs to reduce the further air quality deterioration and reduce the harmful health effects.

Exposure and Management of the Health Risk for the Use of Formaldehyde and Xylene in a Large Pathology Laboratory

BACKGROUND

Formaldehyde and xylene are two hazardous chemicals widely used in pathology laboratories all over the world. The aim of this work was to survey a large volume pathology lab, measuring exposure of workers and residents to formaldehyde and xylene, and verify the efficacy of the undertaken preventive actions and the accomplishment with occupational limit values.

METHODS

Environmental, personal, and biological monitoring of exposure to formaldehyde and xylene in different lab rooms and in 29 lab attendants was repeated yearly from 2017 to 2020. Continuous monitoring of airborne formaldehyde was performed to evaluate the pattern of airborne concentrations while specific tasks were performed. Several risk management and mitigation measures, including setting a new grossing room, reducing the number of samples to be soaked in formaldehyde, and improving the lab practices and equipment, such as the use of chemical hoods, were undertaken after each monitoring campaign, based on the results obtained from the exposure monitoring.

RESULTS

Significant exposures to formaldehyde in pathologists and residents, especially during the grossing of samples, were observed in the first 2 years, with exposure exceeding the occupational exposure limit value; the following surveys showed that the risk management and mitigation measures were effective in reducing airborne concentrations and personal exposure. Xylene, assessed with both environmental and biological monitoring, was always well below the occupational exposure limit value and biological limit values, respectively.

CONCLUSION

Critical exposure to air formaldehyde in attendants of a pathology laboratory could be reduced with the re-organization of lab spaces, new and improved work procedures, and awareness and training initiatives.

Metal-Organic Frameworks for Highly Selective Separation of Xylene Isomers and Single-Crystal X-ray Study of Aromatic Guest-Host Inclusion Compounds

Separation of hydrocarbon molecules, such as benzene/cyclohexane and o-xylene/m-xylene/p-xylene, is relevant due to their widespread application as chemical feedstock but challenging because of their similar boiling points and close molecular sizes. Physisorption separation could offer an energy-efficient solution to this problem, but the design and synthesis of sorbents that exhibit high selectivity for one of the hydrocarbons remain a largely unmet challenge. Herein, we report a new heterometallic MOF with a unique tortuous shape of channels decorated with aromatic sorption sites [Li₂Zn₂(bpy)(ndc)₃] (NIIC-30(Ph), bpy = 4,4'-bipyridine, ndc^2- = naphthalene-1,4-dicarboxylate) and study of its benzene/cyclohexane and xylene vapor and liquid separation. For an equimolar benzene/cyclohexane mixture, it is possible to achieve a 10-fold excess of benzene in the adsorbed phase. In the case of xylenes, microporous framework NIIC-30(Ph) demonstrates outstanding selective sorption properties and becomes a new benchmark for m-/o-xylene separation. In addition, NIIC-30(Ph) is stable enough to carry out at least three separation cycles of benzene/cyclohexane mixtures or ternary o-xylene/m-xylene/p-xylene mixtures both in the liquid and in the vapor phase. Insights into the performance of NIIC-30(Ph) are gained from X-ray structural studies of each aromatic guest inclusion compound.

Assessment of BTX Concentration around Fuel Station in Eastern Province Kingdom of Saudi Arabia

Aim:

The aim of this study is to determine the benzene, toluene, and xylenes (BTX) concentration levels in and around fuel station and its expected health risks in the City of Dammam and Al-Khobar, Saudi Arabia.

Method:

Forty fuel dispensing facilities were randomly selected on the basis of three different areas, residential, traffic intersection, and petrol pump locations (refueling stations). coconut shell charcoal cartridges were used for samples collection and portable Ambient Analyzer was used for measuring BTX (benzene, toluene, and xylenes) concentration.

Results:

Results show that the average concentration of benzene, toluene, and xylenes level around fuel stations was 10.30, 4.09, and 2.47 ppm, respectively. All means of concentration values of BTX around residential, traffic intersection, and fuel stations are exceeding the limits of air quality standards values (P < 0.01). The mean concentration of BTX around residential area, side street, and direct street was benzene 8, 12.2, and 11.5 ppm, toluene 2.5, 5.95, and 3.37 ppm, and xylenes 2, 2.13, and 2.7 ppm. Hazard Quotient (HQ) was more than >1 which showed that carcinogenic probability has increased those exposed to this toxic chemical.

Conclusion:

Ambient concentration of BTX was high compare to neighboring residential area and 100 m from the fuel station which can negatively affect on health of several residences. The Environmental contamination associated with BTX in petrol fuel stations impulses the necessity of preventive programs to reduce further air quality deterioration and reduce the expected health risks.

Contact chemical burn of the hand caused by xylene: A case report

The use of household cleaners during non-commercial cleaning applications is a very common task, and the chemical makeup of the cleaning solutions vary as much as their applications do. Although most users of these products follow the written safety directions and are generally careful with their use, it is not uncommon for users to suffer toxicologic effects of these cleaners without proper protective equipment. In this case report, we describe an unusual chemical burn pattern to the hand of a young female patient after prolonged exposure to a xylene-containing product without proper chemical-resistant gloves. Fortunately, with prompt recognition, and urgent referral for burn treatment, the patient underwent a successful debridement of the burn and suffered minimal functional impairment.

Arene Selectivity by a Flexible Coordination Polymer Host

The coordination polymers [Ag4 (O2 CCF3 )4 (phen)3 ]⋅ phen⋅arene (1⋅phen⋅arene) (phen=phenazine; arene=toluene, p-xylene or benzene) have been synthesised from the solution phase in a series of arene solvents and crystallographically characterised. By contrast, analogous syntheses from o-xylene and m-xylene as the solvent yield the solvent-free coordination polymer [Ag4 (O2 CCF3 )4 (phen)2 ] (2). Toluene, p-xylene and benzene have been successfully used in mixed-arene syntheses to template the formation of coordination polymers 1⋅phen⋅arene, which incorporate o- or m-xylene. The selectivity of 1⋅phen⋅arene for the arene guests was determined, through pairwise competition experiments, to be p-xylene>toluene≈benzene>o-xylene>m-xylene. The largest selectivity coefficient was determined as 14.2 for p-xylene:m-xylene and the smallest was 1.0 for toluene:benzene.

On the Dynamics of Xylene Isomers Excited in the Vacuum-Ultraviolet (VUV) Region

We report on the dynamics of electronically excited o-, m-, and p-xylene on the femtosecond timescale by employing the vacuum-ultraviolet pump-IR probe mass spectrometry technique. The molecules were excited by the fifth harmonic (λ=160 nm) of a Ti:sapphire laser at a superposition of the S3 valence with several Rydberg states. The relaxation pathways were investigated by studying the parent P(+) and the fragment [P-H](+) and [P-CH3 ](+) time-resolved signals generated after interaction with the fundamental beam (λ=800 nm). Relaxation from the excited valence states was found to depend on the relative positions of the methyl groups on the ring. An increasing trend in the order o<m<p was observed for the lifetime of S3 , whereas that of the second valence state S2 presented the opposite trend. Conclusions on the possible deformations and vibrations induced during the relaxation process were drawn: ring deformation involving methyl motion takes place.

Retinoblastoma and ambient exposure to air toxics in the perinatal period

We examined ambient exposure to specific air toxics in the perinatal period in relation to retinoblastoma development. Cases were ascertained from California Cancer Registry records of children diagnosed between 1990 and 2007 and matched to California birth certificates. Controls were randomly selected from state birth records for the same time period. We chose 27 air toxics for the present study that had been listed as possible, probable, or established human carcinogens by the International Agency for Research on Cancer. Children (103 cases and 30,601 controls) included in the study lived within 5 miles of an air pollution monitor. Using logistic regression analyses, we modeled the risk of retinoblastoma due to air toxic exposure, separately for exposures in pregnancy and the first year of life. With a per interquartile range increase in air toxic exposure, retinoblastoma risk was found to be increased with pregnancy exposure to benzene (OR=1.67, 95% CI: 1.06, 2.64) and other toxics which primarily arise from gasoline and diesel combustion: toluene, 1,3-butadiene, ethyl benzene, ortho-xylene, and meta/para-xylene; these six toxics were highly correlated. Retinoblastoma risk was also increased with pregnancy exposure to chloroform (OR=1.35, 95% CI: 1.07, 1.70), chromium (OR=1.29, 95% CI: 1.04, 1.60), para-dichlorobenzene (OR=1.24, 95% CI: 1.04, 1.49), nickel (OR=1.48, 95% CI: 1.08, 2.01), and in the first year of life, acetaldehyde (OR=1.62, 95% CI: 1.06, 2.48). Sources of these agents are discussed.

Novel pathways to 2,5-dimethylfuran via biomass-derived 5-(chloromethyl)furfural

2,5-Dimethylfuran (DMF) is one of the most actively pursued biomass-derived chemicals due to the fact that it can serve both as a biofuel and an intermediate for drop-in terephthalate polymers. DMF can be accessed via catalytic hydrogenation of 5-(hydroxymethyl)furfural (HMF), but the difficult accessibility of HMF from cellulosic biomass is a major impediment to the commercial development of such a process. Alternatively, 5-(chloromethyl)furfural (CMF) is freely accessible in high yield directly from raw biomass and is shown here to be efficiently reduced to DMF under mild conditions via simple derivatives (aldimine, acetal).

Separating xylene isomers by commensurate stacking of p-xylene within channels of MAF-X8

The development of energy-efficient processes for selective separation of p-xylene from mixtures with its isomers is of vital importance in the petrochemical industries. Current industrial practice uses BaX zeolite that has high adsorption selectivity for p-xylene. Finding para-selective structures is challenging. With state-of-the-art simulation methodologies we systematically screened a wide variety of zeolites and metal-organic frameworks (MOFs). Our investigations highlight the crucial importance of the channel dimension on the separation. MAF-X8 is particularly noteworthy because the channel dimensions and geometry allow "commensurate stacking" which we exploit as a separation mechanism at saturation conditions. Due to a significantly improved capacity compared to BaX, the cycle times for p-xylene with MAF-X8 are found to be about a factor of 4.5 longer. This is expected to result in significant process improvements.

Shape selectivity by guest-driven restructuring of a porous material

A flexible metal-organic framework selectively sorbs para- (pX) over meta-xylene (mX) by synergic restructuring around pX coupled with generation of unused void space upon mX loading. The nature of the structural change suggests more generally that flexible structures which are initially mismatched in terms of fit and capacity to the preferred guest are strong candidates for effective molecular separations.

Predictors of indoor BTEX concentrations in Canadian residences

BACKGROUND

Benzene, toluene, ethylbenzene and m-, p-xylenesand o-xylene (BTEX) are a group of volatile organic compounds that originate from similar sources. Given the potentially negative health implications of BTEX exposure and their prevalence in residential indoor air, it is important to understand typical residential concentrations and identify predictors.

DATA AND METHODS

The 2009 to 2011 Canadian Health Measures Survey included an indoor air component. Questionnaires were administered, and respondents were asked to deploy an air sampler in their home for 7 consecutive days. This analysis is based on BTEX data from 5,191 respondents. Mean BTEX concentrations were examined overall, and by dwelling type and garage configuration. Stepwise regression models were used to examine potential sources of BTEX components.

RESULTS

Means were 1.95 μg/m³ (benzene), 19.17 μg/m³ (toluene), 4.09 μg/m³ (ethylbenzene), 14.42 μg/m³ (m-, p-xylenes), and 4.16 μg/m³ (o-xylene). Significant predictors of the presence of BTEX included a garage on the property, regular smoking in the home, renovations in the past month, number of occupants, use of paint remover, and use of fragrance.

INTERPRETATION

Results of this nationally representative study found that BTEX concentrations are relatively low among Canadian residences, and identified several different indoor sources.