Composition-Graded Cu–Pd Nanospheres with Ir-Doped Surfaces on N-Doped Porous Graphene for Highly Efficient Ethanol Electro-Oxidation in Alkaline Media

Iridium Single Atoms to Nanoparticles: Nurturing the Local Synergy with Cobalt-Oxide Supported Palladium Nanoparticles for Oxygen Reduction Reaction

A ternary catalyst comprising Iridium (Ir) single-atoms (SA)s decorated on the Co-oxide supported palladium (Pd) nanoparticles (denoted as CPI-SA) is developed in this work. The CPI-SA with 1 wt.% of Ir exhibits unprecedented high mass activity (MA) of 7173 and 770 mA mgIr -1, respectively, at 0.85 and 0.90 V versus RHE in alkaline ORR (0.1 m KOH), outperforming the commercial Johnson Matthey Pt catalyst (J.M.-Pt/C; 20 wt.% Pt) by 107-folds. More importantly, the high structural reliability of the Ir single-atoms endows the CPI-SA with outstanding durability, where it shows progressively increasing MA of 13 342 and 1372 mA mgIr -1, respectively, at 0.85 and 0.90 V versus RHE up to 69 000 cycles (3 months) in the accelerated degradation test (ADT). Evidence from the in situ partial fluorescence yield X-ray absorption spectroscopy (PFY-XAS) and the electrochemical analysis indicate that the Ir single-atoms and adjacent Pd domains synergistically promote the O2 splitting and subsequent desorption of hydroxide ions (OH-), respectively. Whereas the Co-atoms underneath serve as electron injectors to boost the ORR activity of the Ir single-atoms. Besides, a progressive and sharp drop in the ORR performance is observed when Ir-clusters and Ir nanoparticles are decorated on the Co-oxide-supported Pd nanoparticles.

Ultrafine IrMnOx Nanocluster Decorated Amorphous PdS Nanowires as Efficient Electrocatalysts for High C1 Selectivity in the Alkaline Ethanol Oxidation Reaction

As a novel electrochemical energy conversion device, direct ethanol fuel cells are currently encountering two significant challenges: CO poisoning and the difficulty of C-C bond cleavage in ethanol. In this work, an amorphous PdS nanowires/ultrafine IrMnOx bimetallic oxides (denoted as a-PdS/IrMnOx NWs) catalyst with abundant oxide/metal (crystalline/amorphous) inverse heterogeneous interfaces was synthesized via a hydrothermal process succeeded by a nonthermal air-plasma treatment. This unique interfacial electronic structure along with the incorporation of oxyphilic metal has resulted in a significant enhancement in the electrocatalytic performance of a-PdS/IrMnOx NWs toward the ethanol oxidation reaction, achieving current densities of 12.45 mA·cm-2 and 3.68 A·mgPd-1. Moreover, the C1 pathway selectivity for ethanol oxidation has been elevated to 47%, exceeding that of other as-prepared Pd-based counterparts and commercial Pd/C catalysts. Density functional theory calculations have validated the findings that the decoration of IrMn species onto the amorphous PdS surface has induced a charge redistribution in the interface region. The redistribution of surface charges on the a-PdS/IrMnOx NWs catalyst results in a significant decrease in the activation energy required for C-C bond cleavage and a notable weakening of the CO binding strength at the Pd active sites. Consequently, it enhanced both the EOR C1 pathway selectivity and CO poisoning resistance to the a-PdS/IrMnOx NWs catalyst.

Synthesis of Monodispersed Pd Nanoparticles and Ultrathin Twisty Pd Nanowire Networks for Electrooxidation of Ethanol

In recent years, preparing precious metal catalysts with a controllable morphology has become a hot research topic for researchers. In this study, monodispersed palladium (Pd) nanoparticles (NP) and ultrathin Pd twisty nanowire networks (TNN) were synthesized in a solvothermal system using N,N-dimethylformamide (DMF) and oleylamine (OAm) as solvents, Transmission electron microscopy (TEM) images reveal the successful synthesis of nanoparticles and ultrathin TNN microstructures. Electrochemical data show that the current densities of Pd-NP and Pd-TNN for the ethanol oxidation reaction (EOR) reach 1878 mA mg-1 and 1765 mA mg-1, respectively. Compared to commercial Pd/C, Pd-TNN and Pd-NP exhibit better catalytic stability, lower electron transfer barriers, and more resistance to catalyst poisoning. Temperature, pH value, and ethanol concentration are all favorable for the EOR. According to the experimental data, the mechanism of enhanced electrocatalytic activity of Pd-NP and Pd-TNN catalysts for ethanol oxidation is discussed. This paper presents a method for preparing catalysts with stabilized structures to develop Pd-based catalysts for electrocatalytic oxidation reactions.

Laser Irradiation Synthesis of AuPd Alloy with Decreased Alloying Degree for Efficient Ethanol Oxidation Reaction

The preparation of electrocatalysts with high performance for the ethanol oxidation reaction is vital for the large-scale commercialization of direct ethanol fuel cells. Here, we successfully synthesized a high-performance electrocatalyst of a AuPd alloy with a decreased alloying degree via pulsed laser irradiation in liquids. As indicated by the experimental results, the photochemical effect-induced surficial deposition of Pd atoms, combined with the photothermal effect-induced interdiffusion of Au and Pd atoms, resulted in the formation of AuPd alloys with a decreased alloying degree. Structural characterization reveals that L-AuPd exhibits a lower degree of alloying compared to C-AuPd prepared via the conventional co-reduction method. This distinct structure endows L-AuPd with outstanding catalytic activity and stability in EOR, achieving mass and specific activities as high as 16.01 A mgPd-1 and 20.69 mA cm-2, 9.1 and 5.2 times than that of the commercial Pd/C respectively. Furthermore, L-AuPd retains 90.1% of its initial mass activity after 300 cycles. This work offers guidance for laser-assisted fabrication of efficient Pd-based catalysts in EOR.

Au/Pt Bimetallic Nanowires with Stepped Pt Sites for Enhanced C-C Cleavage in C2+ Alcohol Electro-oxidation Reactions

Efficient C-C bond cleavage and oxidation of alcohols to CO2 is the key to developing highly efficient alcohol fuel cells for renewable energy applications. In this work, we report the synthesis of core/shell Au/Pt nanowires (NWs) with stepped Pt clusters deposited along the ultrathin (2.3 nm) stepped Au NWs as an active catalyst to effectively oxidize alcohols to CO2. The catalytic oxidation reaction is dependent on the Au/Pt ratios, and the Au1.0/Pt0.2 NWs have the largest percentage (∼75%) of stepped Au/Pt sites and show the highest activity for ethanol electro-oxidation, reaching an unprecedented 196.9 A/mgPt (32.5 A/mgPt+Au). This NW catalyst is also active in catalyzing the oxidation of other primary alcohols, such as methanol, n-propanol, and ethylene glycol. In situ X-ray absorption spectroscopy and infrared spectroscopy are used to characterize the catalyst structure and to identify key reaction intermediates, providing concrete evidence that the synergy between the low-coordinated Pt sites and the stepped Au NWs is essential to catalyze the alcohol oxidation reaction, which is further supported by DFT calculations that the C-C bond cleavage is indeed enhanced on the undercoordinated Pt-Au surface. Our study provides important evidence that a core/shell structure with stepped core/shell sites is essential to enhance electrochemical oxidation of alcohols and will also be central to understanding electro-oxidation reactions and to the future development of highly efficient direct alcohol fuel cells for renewable energy applications.

Ethanol Oxidation via 12-Electron Pathway on Spiky Au@AuPd Nanoparticles Assisted by Near-Infrared Light

In this work, ethanol oxidation reaction (EOR) via 12-electron (C1-12e) pathway on spiky Au@AuPd nanoparticles (NPs) with ultrathin AuPd alloy shells is achieved in alkaline media with the assistance of the near-infrared (NIR) light. It is found that OH radicals can be produced from the OH_ads species adsorbed on the surfaces of Pd atoms led by surface plasmon resonance (SPR) effect of spiky Au@AuPd NPs under the irradiation of NIR light. Moreover, OH radicals play the key role for the achievement of EOR proceeded by the desirable C1-12e pathway because OH radicals can directly break the C-C bonds of ethanol. Accordingly, the electrocatalytic performance of spiky Au@AuPd NPs toward EOR under NIR light is greatly improved. For instance, their mass activity can be up to 33.2 A mg_pd ^-1 in the 0.5 m KOH solution containing 0.5 m ethanol, which is about 158 times higher than that of commercial Pd/C catalysts (0.21 A mg_pd ^-1 ) and is better than those of the state-of-the-art Pd-based catalysts reported in literature thus far, to the best of our knowledge. Moreover, their highest mass activity can be further improved to 118.3 A mg_pd ^-1 in the 1.5 m KOH solution containing 1.25 m ethanol.

One-pot synthesis of ultrafine trimetallic PtPdCu alloy nanoparticles decorated on carbon nanotubes for bifunctional catalysis of ethanol oxidation and oxygen reduction

Bifunctional catalysts for ethanol oxidation reaction (EOR) and oxygen reduction reaction (ORR) with high noble-metal utilization are highly beneficial to direct ethanol fuel cells (DEFCs). This study developed a ternary bifunctional catalyst composed of ultrafine PtPdCu alloy nanoparticles and carbon nanotubes (CNTs) support through a facile surfactant-free solvothermal route. The carboxyl terminal groups on CNTs ensure the confined growth of PtPdCu alloys (∼5 nm) and suppress Ostwald ripening of metallic active sites during electrochemical cycling. Consequently, PtPdCu/CNTs exhibits high mass activity (1.95 A mg^-1) and specific activity (4.08 mA cm^-2) toward EOR, which are 7.8 and 8.9 times higher, respectively, than those of commercial Pt/C. Furthermore, PtPdCu/CNTs displays superior stability toward EOR compared with its bimetallic counterparts (PtPd/CNTs and PtCu/CNTs). In addition, PtPdCu/CNTs exhibits the highest half-wave potential of 0.888 V among all electrocatalysts, indicating high ORR activity. Density functional theory calculations reveal that Pd and Cu mediate the electronic structure of Pt, leading to enhanced catalytic activity of PtPdCu/CNTs. The excellent catalytic property of PtPdCu/CNTs can also be attributed to the bifunctional effects of Pd/Cu and the interaction between metal and the carbon support. The proposed material is a contribution to the family of efficient ternary-alloy electrocatalysts for fuel cells.

Pt-Mediated Interface Engineering Boosts the Oxygen Reduction Reaction Performance of Ni Hydroxide-Supported Pd Nanoparticles

Fuel cells are considered potential energy conversion devices for utopia; nevertheless, finding a highly efficacious and economical electrocatalyst for the oxygen reduction reaction (ORR) is of great interest. By keeping this in view, we have proposed a novel design of a trimetallic nanocatalyst (NC) comprising atomic Pt clusters at the heterogeneous Ni(OH)₂-to-Pd interface (denoted NPP-70). The as-prepared material surpasses the commercial J.M.-Pt/C (20 wt %) catalyst by ∼ 166 and ∼19 times with exceptionally high specific and mass activities of 16.11 mA cm^-2 and 484.8 mA mg_Pt^-1 at 0.90 V versus reversible hydrogen electrode (RHE) in alkaline ORR (0.1 M KOH), respectively. On top of that, NPP-70 NC retains nearly 100% performance after 10k accelerated durability test (ADT) cycles. The results of physical characterization and electrochemical analysis confirm that atomic-scale Pt clusters induce strong lattice strain (compressive) at the Ni(OH)₂-to-Pd interface, which triggers the electron relocation from Ni to Pt atoms. Such charge localization is vital for O₂ splitting on surface Pt atoms, followed by the relocation of OH^- ions from the Pd surface. Besides, a sharp fall down in ORR performance (mass activity is 37 mA mg_Pt^-1 at 0.90 V versus RHE) is observed when the Pt clusters are decorated on the surface of NiO_x and Pd (denoted NPP-RT). In situ partial fluorescence yield mode X-ray absorption spectroscopy (PFY-XAS) was employed to reveal the ORR pathways on both configurations. The obtained results demonstrate that interface engineering can be a potential approach to boost the electrocatalytic activity of metal hydroxide/oxide-supported Pd nanoparticles and in turn allow Pd to be a promising alternative for commercial Pt catalysts.

Ultrafine Core@Shell Cu1Au1@Cu1Pd3 Nanodots Synergized with 3D Porous N-Doped Graphene Nanosheets as a High-Performance Multifunctional Electrocatalyst

Rationally combining designed supports and metal-based nanomaterials is effective to synergize their respective physicochemical and electrochemical properties for developing highly active and stable/durable electrocatalysts. Accordingly, in this work, sub-5 nm and monodispersed nanodots (NDs) with the special nanostructure of an ultrafine Cu₁Au₁ core and a 2-3-atomic-layer Cu₁Pd₃ shell are synthesized by a facile solvothermal method, which are further evenly and firmly anchored onto 3D porous N-doped graphene nanosheets (NGS) via a simple annealing (A) process. The as-obtained Cu₁Au₁@Cu₁Pd₃ NDs/NGS-A exhibits exceptional electrocatalytic activity and noble-metal utilization toward the alkaline oxygen reduction, methanol oxidation, and ethanol oxidation reactions, showing dozens-fold enhancements compared with commercial Pd/C and Pt/C. Besides, it also has excellent long-term electrochemical stability and electrocatalytic durability. Advanced and comprehensive experimental and theoretical analyses unveil the synthetic mechanism of the special core@shell nanostructure and further reveal the origins of the significantly enhanced electrocatalytic performance: (1) the prominent structural properties of NGS, (2) the ultrasmall and monodispersed size as well as the highly uniform morphology of the NDs-A, (3) the special Cu-Au-Pd alloy nanostructure with an ultrafine core and a subnanometer shell, and (4) the strong metal-support interaction. This work not only develops a facile method for fabricating the special metal-based ultrafine-core@ultrathin-shell nanostructure but also proposes an effective and practical design paradigm of comprehensively and rationally considering both supports and metal-based nanomaterials for realizing high-performance multifunctional electrocatalysts, which can be further expanded to other supports and metal-based nanomaterials for other energy-conversion or environmental (electro)catalytic applications.

Highly Selective Pd Nanosheet Aerogel Catalyst with Hybrid Strain Induced by Laser Irradiation and P Doping Postprocess

Strain engineering of electrocatalysts provides an effective strategy to improve the intrinsic catalytic activity. Here, the defect-rich crystalline/amorphous Pd nanosheet aerogel with hybrid microstrain and lattice strain is synthesized by combining laser irradiation and phosphorus doping methods. The surface strain exhibited by the microstrain and lattice strain shifts the d-band center of the electrocatalyst, enhancing the adsorption of intermediates in the ethanol oxidation reaction and thus improving the catalytic performances. The measured mass activity, specific activity and C1-path selectivity of the Pd nanosheet aerogel are 4.48, 3.06, and 5.06 times higher than those of commercial Pd/C, respectively. These findings afford a new strategy for the preparation of highl activity and C1 pathway selective catalysts and provide insight into the catalytic mechanism of strain-rich heterojunction materials based on tunable surface strain values.

Corrosion Chemistry of Electrocatalysts

Electrocatalysts are the core components of many sustainable energy conversion technologies that are considered the most potential solution to the worldwide energy and environmental crises. The reliability of structure and composition pledges that electrocatalysts can achieve predictable and stable performance. However, during the electrochemical reaction, electrocatalysts are influenced directly by the applied potential, the electrolyte, and the adsorption/desorption of reactive species, triggering structural and compositional corrosion, which directly affects the catalytic behaviors of electrocatalysts (performance degradation or enhancement) and invalidates the established structure-activity relationship. Therefore, it is necessary to elucidate the corrosion behavior and mechanism of electrocatalysts to formulate targeted corrosion-resistant strategies or use corrosion reconstruction synthesis techniques to guide the preparation of efficient and stable electrocatalysts. Herein, the most recent developments in electrocatalyst corrosion chemistry are outlined, including corrosion mechanisms, mitigation strategies, and corrosion syntheses/reconstructions based on typical materials and important electrocatalytic reactions. Finally, potential opportunities and challenges are also proposed to foresee the possible development in this field. It is believed that this contribution will raise more awareness regarding nanomaterial corrosion chemistry in energy technologies and beyond.

Trace Doping of Pb(OH)2 Species on PdPb Alloys Boost Highly Active and Stable Ethanol Oxidation

PdPb nanocrystals have drawn considerable attention due to their excellent catalytic properties, while their practical applications have been impeded by the severe degradation of activity, which is caused by the adsorption of intermediates (especially CO) during the operation. Herein, we first present porous PdPb alloys with the incorporation of amorphous Pb(OH)₂ species as highly active and stable electrocatalysts. Alloying Pd with Pb species is initially proposed to optimize the Pd-Pd interatomic distance and adjust the d-band center of Pd. Importantly, the amorphous Pb(OH)₂ species are beneficial to promoting the formation of OH_ad and the removal of CO_ad. Therefore, PdPb-Pb(OH)₂ catalysts show a mass activity of 3.18 A mg_Pd ^-1 and keep excellent stability for the ethanol oxidation reaction (EOR). In addition, further CO stripping and a series of CO poisoning experiments indicate that PdPb-Pb(OH)₂ composites possess much better CO tolerance benefiting from the tuned electronic structure of Pd and surface incorporation of Pb(OH)₂ species.

Ultrathin Pd3 Pt1 Rh0.1 Nanorings with Strong C-C Bond Breaking Ability for the Ethanol Oxidation Reaction

Ethanol as a fuel for direct ethanol fuel cells (DEFCs) has the advantages of being highly energetic, environmentally friendly, and low-cost, while the slow anodic ethanol oxidation reaction (EOR), intermediate poisoning effect, and incomplete oxidation of ethanol became obstacles to the development of DEFCs. Herein, a 2D ternary cyclic Pd₃ Pt₁ Rh_0.1 nanorings (NRs) catalyst with efficient EOR performance is prepared via a facile one-pot solvothermal approach, and systematic studies are carried out to reveal the mechanisms of the enhanced performance and C-C bond selectivity. In particular, the optimized catalyst exhibits impressive mass activity, stability, toxicity resistance, and C-C bond cleavage ability. It's proposed that the considerable performance is attributed to the unique hollow structure, providing abundant active sites. The high toxicity resistance is not only attributed to the electronic modulation of the catalyst material by Rh atoms, but also depends on the excellent water activation properties of Rh, which contribute to the removal of intermediates, such as CO. In addition, the density functional theory calculations showed that the introduction of Rh significantly enhances the C-C bond cleavage ability of the catalyst, further improving the EOR activity.

Tailoring Amorphous PdCu Nanostructures for Efficient C-C Cleavage in Ethanol Electrooxidation

The large-scale application of direct ethanol fuel cells has long been obstructed by the sluggish ethanol oxidation reaction at the anode. Current wisdom for designing and fabricating EOR electrocatalysts has been focused on crystalline materials, which result in only limited improvement in catalytic efficiency. Here, we report the amorphous PdCu (a-PdCu) nanomaterials as superior EOR electrocatalysts. The amorphization of PdCu catalysts can significantly facilitate the C-C bond cleavage, which thereby affords a C1 path faradic efficiency as high as 69.6%. Further tailoring the size and shape of a-PdCu nanocatalysts through the delicate kinetic control can result in a maximized mass activity up to 15.25 A/mg_Pd, outperforming most reported catalysts. Notably, accelerated durability tests indicate that both the isotropic structure and one-dimensional shape can dramatically enhance the catalytic durability of the catalysts. This work provides valuable guidance for the rational design and fabrication of amorphous noble metal-based electrocatalysts for fuel cells.

One Stone Two Birds: Unlocking the Synergy between Amorphous Ni(OH)2 and Pd Nanocrystals toward Ethanol and Formic Acid Oxidation

Even though extensive efforts have been devoted to mixing Pd nanocrystals with Ni(OH)₂ for the enhanced synergy, it remains a great challenge to incorporate nanosized Ni(OH)₂ species on the Pd electrode and reveal their synergy. Herein, we present spongelike Pd nanocrystals with the modification of amorphous Ni(OH)₂ species. The catalyst configuration is first considered by compositing Pd with Ni(OH)₂ species to optimize the Pd-Pd interatomic distance and then constructing a strongly coupled interface between Pd nanostructures and Ni(OH)₂ species. For the ethanol oxidation reaction (EOR) and the formic acid oxidation reaction (FAOR), Pd-Ni(OH)₂ composites exhibit an impressive mass activity of 4.98 and 2.65 A mg_Pd^-1, respectively. Most impressively, there is no significant decrease in the EOR activity during five consecutive cycles (50 000 s). A series of CO-poisoning tests have proved that the enhanced EOR and FAOR performances involve synergy between Pd nanostructures and Ni(OH)₂ species.

Carbon-Supported Noble-Metal Nanoparticles for Catalytic Applications—A Review

Noble-metal nanoparticles (NMNPs), with their outstanding properties, have been arousing the interest of scientists for centuries. Although our knowledge of them is much more significant today, and we can obtain NMNPs in various sizes, shapes, and compositions, our interest in them has not waned. When talking about noble metals, gold, silver, and platinum come to mind first. Still, we cannot forget about elements belonging to the so-called platinum group, such as ruthenium, rhodium, palladium, osmium, and iridium, whose physical and chemical properties are very similar to those of platinum. It makes them highly demanded and widely used in various applications. This review presents current knowledge on the preparation of all noble metals in the form of nanoparticles and their assembling with carbon supports. We focused on the catalytic applications of these materials in the fuel-cell field. Furthermore, the influence of supporting materials on the electrocatalytic activity, stability, and selectivity of noble-metal-based catalysts is discussed.

Insight and Activation Energy Surface of the Dehydrogenation of C2HxO Species in Ethanol Oxidation Reaction on Ir(100)

Dehydrogenation of an organic compound is the first and the most fundamental elementary reaction in many organic reactions. In ethanol oxidation reaction (EOR) to form CO 2 , there are a total of 46 pathways in C 2 H x O (x=1-6) species leading to the removal of all six hydrogen atoms in five C-H bonds and one O-H bond. To investigate the degree of dehydrogenation in EOR under operando conditions, we performed density function theory (DFT) calculations to study 28 dehydrogenation steps of C 2 H x O on Ir(100). An activation energy surface was then constructed and compared with that of the C-C bond cleavages to understand the importance of the degree of dehydrogenation in EOR. The results show that there are likely 28 dehydrogenations in EOR under fuel cell temperatures and the last two hydrogens in C 2 H 2 O are less likely cleaved. On the other hand, deep dehydrogenation including 45 dehydrogenations can occur under ethanol steam reforming conditions.

Branch-Regulated Palladium-Antimony Nanoparticles Boost Ethanol Electro-oxidation to Acetate

Tuning the composition and morphology of bimetallic nanoparticles (NPs) offers an effective strategy to improve their electrocatalytic performance. In this work, we present a facile wet-chemistry procedure to engineer PdSb NPs with controlled morphology. Spherical or branched NPs are produced by tuning the heterogeneous nucleation of Sb on Pd seeds. Compared with pure Pd NPs, the incorporation of Sb not only decreases the amount of Pd used but also results in a significant increase of activity and stability for the electrocatalytic ethanol oxidation reaction (EOR). Best performances are obtained with highly branched PdSb NPs, which deliver a specific activity of 109 mA cm^-2 and a mass activity of up to 2.42 A mg_Pd^-1, well above that of a commercial Pd/C catalyst and branched Pd NPs. Moreover, PdSb displays significant stability enhancement of over 10 h for the EOR measurements. Density functional theory calculations reveal that the improved performance of PdSb NPs is related to the role played by Sb in reducing the energy barrier of the EOR rate-limiting step. Interestingly, as a side and value-added product of the EOR, acetate is obtained with 100% selectivity on PdSb catalysts.

Assembly of Alloyed PdCu Nanosheets and Their Electrocatalytic Oxidation of Ethanol

Two-dimensional (2D) nanostructured catalysts have attracted great attention in many important fields, including energy applications and chemical industry. In this study, PdCu nanosheet assemblies (NSAs) have been synthesized and investigated as electrocatalysts for direct ethanol fuel cells in an alkaline medium. A great number of active sites on the nanosheets of PdCu NSAs for ethanol electro-oxidation are exposed, where the electron structures are optimized combined with the second element copper. Electrochemical measurements show that PdCu NSA1 exhibits excellent catalytic activity (2536 mA mg^-1) and cyclic stability compared to PdCu NSA2 (1700 mA mg^-1) and PdCu NSA3 (1436 mA mg^-1), much higher than commercial Pd/C. Kinetics studies on the electrolysis of ethanol suggest that PdCu NSAs should be more favorable at higher catalytic temperatures, higher concentrations of ethanol, and low pH value environments. The unique composition and structures PdCu NSA1 would result in the lowest energy barrier in the rate-controlling step of the ethanol oxidation reaction (EOR), confirmed by density functional theory (DFT). The formation mechanism of PdCu NSAs and their excellent electrocatalytic activity toward EOR have been discussed and analyzed.

Electronic and Potential Synergistic Effects of Surface-Doped P-O Species on Uniform Pd Nanospheres: Breaking the Linear Scaling Relationship toward Electrochemical Oxygen Reduction

Developing efficient oxygen reduction reaction (ORR) electrocatalysts is critical to fuel cells and metal-oxygen batteries, but also greatly hindered by the limited Pt resources and the long-standing linear scaling relationship (LSR). In this study, ∼6 nm and highly uniform Pd nanospheres (NSs) having surface-doped (SD) P-O species are synthesized and evenly anchored onto carbon blacks, which are further simply heat-treated (HT). Under alkaline conditions, Pd/^SDP-O NSs/C-HT exhibits respective 8.7 (4.3)- and 5.0 (5.5)-fold enhancements in noble-metal-mass- and area-specific activity (NM-MSA and ASA) compared with the commercial Pd/C (Pt/C). It also possesses an improved electrochemical stability. Besides, its acidic ASA and NM-MSA are 2.9 and 5.1 times those of the commercial Pd/C, respectively, and reach 65.4 and 51.5% of those of the commercial Pt/C. Moreover, it also shows nearly ideal 4-electron ORR pathways under both alkaline and acidic conditions. The detailed experimental and theoretical analyses reveal the following: (1) The electronic effect induced by the P-O species can downshift the surface d-band center to weaken the intermediate adsorptions, thus preserving more surface active sites. (2) More importantly, the potential hydrogen bond between the O atom in the P-O species and the H atom in the hydrogen-containing intermediates can in turn stabilize their adsorptions, thus breaking the ORR LSR toward more efficient ORRs and 4-electron pathways. This study develops a low-cost and high-performance ORR electrocatalyst and proposes a promising strategy for breaking the ORR LSR, which may be further applied in other electrocatalysis.

Electroreduction of Nitrate to Ammonia on Palladium-Cobalt-Oxygen Nanowire Arrays

Developing high-efficiency electrocatalysts for the selective reduction of nitrate to valuable ammonia is of great significance. Herein, Pd-PdO-modified Co₃O₄ nanowire arrays on nickel foam (PdCoO/NF) are fabricated by a facile cation-exchange reaction. Pd and PdO can facilitate the generation of adsorbed hydrogen, and abundant oxygen vacancies can promote nitrate activation. Therefore, the PdCoO/NF exhibits a superior nitrate conversion rate (89.3%), Faradaic efficiency (88.6%), and ammonium selectivity (95.3%) at -1.3 V versus a saturated calomel electrode. The source of the produced ammonia is confirmed by ¹⁵N isotope labeling experiments and ¹H magnetic resonance. This presented synthetic method provides a powerful strategy for the preparation of nanowire arrays with controllable compositions for selective nitrate electroreduction to ammonia.

Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review

Carbon-based nanocomposites have developed as the most promising and emerging materials in nanoscience and technology during the last several years. They are microscopic materials that range in size from 1 to 100 nanometers. They may be distinguished from bulk materials by their size, shape, increased surface-to-volume ratio, and unique physical and chemical characteristics. Carbon nanocomposite matrixes are often created by combining more than two distinct solid phase types. The nanocomposites that were constructed exhibit unique properties, such as significantly enhanced toughness, mechanical strength, and thermal/electrochemical conductivity. As a result of these advantages, nanocomposites have been used in a variety of applications, including catalysts, electrochemical sensors, biosensors, and energy storage devices, among others. This study focuses on the usage of several forms of carbon nanomaterials, such as carbon aerogels, carbon nanofibers, graphene, carbon nanotubes, and fullerenes, in the development of hydrogen fuel cells. These fuel cells have been successfully employed in numerous commercial sectors in recent years, notably in the car industry, due to their cost-effectiveness, eco-friendliness, and long-cyclic durability. Further; we discuss the principles, reaction mechanisms, and cyclic stability of the fuel cells and also new strategies and future challenges related to the development of viable fuel cells.

Cr-Doped Pd Metallene Endows a Practical Formaldehyde Sensor New Limit and High Selectivity

Electrochemical sensors for detecting micromolecule organics are desirable for improving the perception of environmental quality and human health. However, currently, the electrochemical sensors for formaldehyde are substantially limited on the market due to the long-term unsolved problems of the low electrooxidation efficiency and CO poisoning issue of commercial Pd catalysts. Here, a 2D Cr-doped Pd metallene (Cr-Pdene) with few atomic layers is shown as an advanced catalyst for ultrasensitive and selective sensing of formaldehyde via a highly efficient formaldehyde electrooxidation. It is found that the doping of Cr into Pd metallene can efficiently optimize the electronic structure of Pd and weaken the interaction between Pd and CO, providing an anti-poisoning means to favor CO₂ production and suppress CO adsorption. The Cr-Pdene-based electrochemical sensor exhibits one order of magnitude higher detection range and, especially, much higher anti-interference for formaldehyde than that of the conventional sensors. Most importantly, it is demonstrated that the Cr-Pdene can be integrated into commercializable wireless sensor networks or handheld instruments for promising applications relating to the environment, health, and food.

Amorphous Palladium-Based Alloy Nanoparticles as Highly Active Electrocatalysts for Ethanol Oxidation

Amorphous Pd-P metal-metalloid alloy nanoparticles showed higher electrochemical ethanol oxidation reaction performance than the crystalline Pd nanopartilces. The high performance was attributed to the rich defective coordination unsaturated sites and...

Alloyed Palladium-Lead Nanosheet Assemblies for Electrocatalytic Ethanol Oxidation

Synthesizing alloyed bimetallic electrocatalysts with a three-dimensional (3D) structure assembly have arouse great interests in electrocatalysis. We synthesized a class of alloyed Pd₃Pb/Pd nanosheet assemblies (NSAs) composed of a two-dimensional (2D) sheet structure with adjustable compositions via an oil bath approach at a low temperature. Both the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal the successful formation of the nanosheet structure, where the morphology of Pd₃Pb/Pd NSAs can be regulated by adjusting the atomic mole ratio of Pb and Pb metal precursors. The power X-ray diffraction (XRD) pattern shows that Pd₃Pb/Pd NSA catalysts are homogeneously alloyed. Electrochemical analysis and the density functional theory (DFT) method demonstrate that the electrocatalytic activity of the alloyed Pd₃Pb/Pd NSAs can be improved by the doping of the Pb element. As a result of the addition of element Pb and change of the electron structure, the electrocatalytic activity toward ethanol oxidation of alloyed Pd₃Pb/Pd-15 NSA can reach up to 2886 mA mg^-1, which is approximately 2.8 times that of the pure Pd NSA counterpart (1020 mA mg^-1). The Pd₃Pb/Pd NSAs are favorable in a high catalytic temperature, high KOH concentration, and high ethanol concentration.

Bifunctional effect of Bi(OH)3 on the PdBi surface as interfacial Brønsted base enables ethanol electro-oxidization

Palladium (Pd) is supposed to be one of the most promising catalytic metals towards ethanol (C₂H₅OH) oxidation reaction (EOR). However, Pd electrocatalysts easily suffer from the poisoning of the intermediates (especially CO), resulting in the quick decay of EOR catalysis. Herein, inspired by the Brønsted-Lowry acid-base theory, a "attraction-repulsion" concept is proposed to guide the surface structure engineering toward EOR catalysts. Specifically, we induce Bi(OH)₃ species as Brønsted base onto PdBi nanoplates to effectively repel the adsorption of CO intermediates. The PdBi-Bi(OH)₃ nanoplates show an impressive mass activity of 4.46 A mg_Pd^-1 during the EOR catalysis and keep excellent stability. Both the stability and enhanced performance are attributed by the interfacial Brønsted base Bi(OH)₃ which can selectively attract and repel reactants and intermediates, as evidenced from in situ measurements and theoretical views.

Density functional theory studies of transition metal carbides and nitrides as electrocatalysts

Transition metal carbides and nitrides are interesting non-precious materials that have been shown to replace or reduce the loading of precious metals for catalyzing several important electrochemical reactions. The purpose of this review is to summarize density functional theory (DFT) studies, describe reaction pathways, identify activity and selectivity descriptors, and present a future outlook in designing carbide and nitride catalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), nitrogen reduction reaction (N₂RR), CO₂ reduction reaction (CO₂RR) and alcohol oxidation reactions. This topic is of high interest to scientific communities working in the field of electrocatalysis and this review should provide theoretical guidance for the rational design of improved carbide and nitride electrocatalysts.

Construction of Pd-Zn dual sites to enhance the performance for ethanol electro-oxidation reaction

Rational design and synthesis of superior electrocatalysts for ethanol oxidation is crucial to practical applications of direct ethanol fuel cells. Here, we report that the construction of Pd-Zn dual sites with well exposure and uniformity can significantly improve the efficiency of ethanol electro-oxidation. Through synthetic method control, Pd-Zn dual sites on intermetallic PdZn nanoparticles, Pd-Pd sites on Pd nanoparticles and individual Pd sites are respectively obtained on the same N-doped carbon coated ZnO support. Compared with Pd-Pd sites and individual Pd sites, Pd-Zn dual sites display much higher activity for ethanol electro-oxidation, exceeding that of commercial Pd/C by a factor of ~24. Further computational studies disclose that Pd-Zn dual sites promote the adsorption of ethanol and hydroxide ion to optimize the electro-oxidation pathway with dramatically reduced energy barriers, leading to the superior activity. This work provides valuable clues for developing high-performance ethanol electro-oxidation catalysts for fuel cells.

Rapid Aqueous Synthesis of Large-Size and Edge/Defect-Rich Porous Pd and Pd-Alloyed Nanomesh for Electrocatalytic Ethanol Oxidation

In this work, a facile aqueous synthesis strategy was used (complete in 5 min at room temperature) to produce large-size Pd, PdCu, and PdPtCu nanomeshes without additional organic ligands or solvent and the volume restriction of reaction solution. The obtained metallic nanomeshes possess graphene-like morphology and a large size of dozens of microns. Abundant edges (coordinatively unsaturated sites, steps, and corners), defects (twins), and mesopores are seen in the metallic ultrathin structures. The formation mechanism for porous Pd nanomeshes disclosed that they undergo oriented attachment growth along the ⟨111⟩ direction. Owing to structural and compositional advantages, PdCu porous nanomeshes with certain elemental ratios (e. g., Pd₈₇ Cu₁₃ ) presented enhanced electrocatalytic performance (larger mass activity, better CO tolerance and stability) toward ethanol oxidation.

Highly efficient blackberry-like trimetallic PdAuCu nanoparticles with optimized Pd content for ethanol electrooxidation

The rational design of highly efficient catalysts for ethanol electrooxidation is extremely challenging for developing direct ethanol fuel cells (DEFCs). Herein, a facile one-pot method has been developed to prepare blackberry-like PdAuCu nanoparticles (NPs) with tunable composition and surface structures. Among PdAuCu NPs with different Pd contents (1.6-22 mass%), PdAuCu NPs-0.5 (contained Pd at 2.5 mass%) delivered one of the highest catalytic activities of Pd-based catalysts towards ethanol electrooxidation, exhibiting a mass activity of 23.0 A mg_Pd^-1. Kinetic analysis, electrochemical impedance spectroscopy and CO stripping test results suggested that the excellent electrocatalytic activity may originate from the optimized balance between Pd content and surface structure of PdAuCu NPs-0.5. The optimization of the balance between composition and surface structure would contribute to the further design of multimetallic nanoparticles for fuel cells and other applications.

Trimetallic synergy in dendritic intermetallic PtSnBi nanoalloys for promoting electrocatalytic alcohol oxidation

Developing effective and robust novel electrocatalysts for direct alcohol fuel cells has been gaining much attention. However, the widely used Pt catalyst suffers from limitations including the sluggish kinetics, severe CO poisoning, and catalyst lost caused by aggregation and Ostwald ripening during alcohol oxidation reaction. Herein, dendritic intermetallic PtSnBi nanoalloys were synthesized via a facile hydrothermal approach with high electrocatalytic performance and enhanced CO resistance for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) owing to the synergism of the chosen three elements and unique three-dimensional morphology. Specifically, the PtSnBi nanoalloys display 4.6 and 6.7 times higher of mass activity (7.02 A mg^-1_Pt) and specific activity (16.65 mA cm^-2) toward MOR than those of commercial Pt/C, respectively. The mass activity of PtSnBi nanoalloys still retains 75.7% of the initial value after 800 cycles of stability test, superior to Pt/C (38.0%). The dual-functional effect of Sn, optimized electronic structure by the ligand effect, and unique atomic arrangement are responsible for the enhanced MOR activity and stability of PtSnBi nanoalloys. Furthermore, the PtSnBi nanoalloys with highlighted anti-CO poisoning capacity also improve the electrocatalytic performance toward EOR, indicating their great promise as broad energy electrocatalysts.

Potential-Dependent Mechanistic Study of Ethanol Electro-oxidation on Palladium

We herein used the density functional theory (DFT) method and the implicit continuum solvation model to study the potential-dependent mechanism of ethanol oxidation reaction (EOR) on palladium (Pd). Energy evolutions of the EOR on low-index Pd surfaces, including (111), (110), and (100), were obtained as a function of the electrode potential. Moreover, the onset potentials for key intermediates and products were calculated. In addition, the potential range for adsorbed ethanol as the most stable adsorption state for proceeding the EOR was determined to be between 0.15 and 0.78 V via the calculated Pourbaix diagrams when considering hydrogen underpotential deposition and Pd(II) oxide formation as competing reactions. Specifically, the behavior of Pd(111) as the dominating facet decided the overall activity of the EOR with onset potentials to acidic acid/acetate at 0.40 V, to carbon dioxide at 0.71 V, and to oxide formation at 0.78 V. Pd(110) was predicted to exhibit the optimal activity toward the EOR with the lowest onset potentials to both the first dehydrogenation process and carbon dioxide at 0.08 and 0.60 V, respectively. A computational potential-dependent mechanism of the EOR was proposed, which agrees well with the experimental curve of linear sweeping voltammetry on the commercial Pd/C electrocatalyst. Our study suggests that targeted control of products can be tuned with proper overpotential and thus provides a foundation for the future development of EOR electrocatalysts.

Surfactant-Assisted Synthesis of Palladium Nanosheets and Nanochains for the Electrooxidation of Ethanol

The synthesis of metal nanometer electrocatalysts with a two-dimensional (2D) structure or rich active sites has become a research hotspot in electrocatalysis. In this work, surfactant hexadecyltrimethylammonium bromide (CTAB) was used to assist the synthesis and assembly of Pd ultrathin nanosheet with the help of Mo(CO)₆ in the start system. Pd nanochain composed of nanoparticles is obtained under the same condition, replacing CTAB with carrageenan only. Electrochemical measurements showed that the catalytic peak current density for the electrooxidation of ethanol can reach 2145 mA mg^-1 for the Pd nanosheet assembly (NSA) and 1696 mA mg^-1 for Pd nanochains. Pd nanosheet assembly also has a lower electron-transfer barrier, better catalytic stability, and antipoisoning performance than that of Pd nanochains. The mechanism of Pd nanosheets and nanochains catalysts the enhanced electrocatalytic activity toward ethanol oxidation has been discussed based on the experimental data.

3D Taraxacum-like porous Pd nanocages with Bi doping: High-performance non-Pt electrocatalysts for ethanol oxidation reaction

Modifying the electronic structure and optimizing the geometric structure can expeditiously tune the electrocatalytic properties of catalysts, resulting in considerably enhanced electrocatalytic performance towards electrocatalytic oxidation of liquid fuels. We herein report a simple synthetic strategy to prepare Bi-doped 3D taraxacum-like Pd nanocages (NCs) composed of porous nanosheets, which possess high surface areas and strong synergistic effects. Notably, a trace of Bi diffuses into the lattice of Pd and increases the electronic effects of the surface of Pd, endowing PdBi-0.5 NCs/C with superior electrocatalytic performance towards ethanol oxidation reaction (EOR). The mass activity and specific activity of PdBi-0.5 NCs/C were 3494.8 mA mg_Pd^-1 and 10.37 mA cm^-2, being 4.08- and 4.82- fold enhancements as compared with commercial Pd/C, respectively. Moreover, the highly open porous 3D nanocages structure with rich active sites and defects can also facilitate the mass/electron transfer to favor the EOR kinetics.

One-pot synthesis of mesoporous palladium/C nanodendrites as high-performance oxygen reduction eletrocatalysts through a facile dual surface protecting agent-assisted strategy

Palladium (Pd) is regarded as a potential non-platinum electrocatalyst to drive oxygen reduction in fuel cells. The development of Pd-based electrocatalysts with high performances through structural engineering is still highly desirable. Herein, a facile one-pot synthesis strategy with the assistance of dual surface protecting agents was developed to fabricate carbon-supported Pd (Pd/C) nanodendrites with high mesoporosity. The mesoporous spherical Pd/C nanodendrites are built with connected nanoparticles with a small size of several nanometers and coated by simultaneously formed carbon layers. The used dual protecting agents, glycine and oleylamine, exhibit synergistic effects to engineer Pd growth to form the unique mesoporous dendritic structure. Benefiting from the mesoporous feature, small size, defect-rich surface and carbon coating, the obtained mesoporous Pd/C nanodendrites exhibit great electrocatalytic performance toward the oxygen reduction reaction (ORR).

Unveiling Synergistic Effects of Interstitial Boron in Palladium-Based Nanocatalysts for Ethanol Oxidation Electrocatalysis

Alloying is one of the most promising routes for tuning the physicochemical properties of noble metal-based nanocatalysts and thus improving their (electro)catalytic performance. Despites numerous achievements, bimetallic and trimetallic nanoalloys have still been thoroughly studied for the past two decades. In this study, metalloid boron (B) was alloyed within palladium (Pd)-based nanocatalysts to promote the electrochemical ethanol oxidation reaction (EOR) in alkaline media. The optimum PdCuB nanocatalyst exhibited remarkable electrochemical EOR activity (5.83 A mg_Pd^-1) and good operation stability (both cycling and chronoamperometric studies). Mechanistic studies in both pure KOH and a KOH/ethanol mixture attributed superior EOR performance to positive synergistic effects of B in Pd-based nanocatalysts that kinetically accelerated the removal of poisoning ethoxy intermediates (the rate-determining step of EOR). They included (i) an electronic effect that changed the electronic structure of Pd and thus weakened the adsorption of poisoning ethoxy intermediates, (ii) a bifunctional effect that facilitated the adsorption of OH_ads and thus kinetically accelerated the further oxidation of poisoning intermediates, and (iii) a structural effect in which smaller B interstitially inserted into Pd-based nanocrystals and thus suppressed the physical Ostwald ripening processes.

Development of sulfide, nitrogen co-doping hollow carbon with wideband electromagnetic absorption capability

Exploration of an economic, easy-producing method to develop high-performance electromagnetic absorber has been a global research interest, owing to the increasingly electromagnetic pollution and interference. In this work, sulfide, nitrogen co-doping carbon (NS-HCS) has been successfully prepared by an in situ copolymer and subsequent calcination reaction. The morphologies and phase compositions of these as-prepared samples are analyzed via the transmission electron microscopy (TEM), element mappings, X-ray diffraction (XRD) and X-ray photoelectron spectrum (XPS). The result confirms the hollow shaped structure of amorphous carbon is constructed with various types of N, S based covalent bonds. The dotted N and S elements are contribution for the conductive loss and dipole polarization relaxation behavior. The minimum reflection loss value of -34 dB, and effective bandwidth reaches 6.8 GHz with only 1.6 mm. The as-prepared wideband electromagnetic absorber will pave a simple and effective method to obtain lightweight, broadband and thin thickness electromagnetic absorption materials.

Promoting Effects of Au Submonolayer Shells on Structure-Designed Cu-Pd/Ir Nanospheres: Greatly Enhanced Activity and Durability for Alkaline Ethanol Electro-Oxidation

Rationally engineering the surface physicochemical properties of nanomaterials can improve their activity and durability for various electrocatalytic and energy conversion applications. Cu-Pd/Ir (CPI) nanospheres (NSs) anchored on N-doped porous graphene (NPG) [(CPI NSs/NPG)] have been recently demonstrated as a promising electrocatalyst for the alkaline ethanol oxidation reaction (EOR); to further enhance their electrocatalytic performance, the NPG-supported CPI NSs are coated with Au submonolayer (SML) shells (SMSs), through which their surface physicochemical properties can be tuned. CPI NSs/NPG is prepared by our previously developed method and possesses the special structures of composition-graded Cu₁Pd₁ and surface-doped Ir_0.03. The Au SMSs with designed surface coverages are formed via an electrochemical technology involving incomplete Cu underpotential deposition (UPD) and Au³⁺ galvanic replacement. A distinctive volcano-type relation between the EOR electrocatalytic activity and the Au-SMS surface coverage for CPI@Au_SML NSs/NPG is revealed, and the optimal CPI@Au_1/6ML NSs/NPG greatly surpasses commercial Pd/C and CPI NSs/NPG in electrocatalytic activity and noble metal utilization. More importantly, its electrocatalytic durability in 1 h chronoamperometric and 500-cycle potential cycling degradation tests is also significantly improved. According to detailed physicochemical characterizations, electrochemical analyses, and density functional theory calculations, the promoting effects of the Au SMS for enhancing the EOR electrocatalytic activity and durability of CPI NSs/NPG can be mainly attributed to the greatly weakened carbonaceous intermediate bonding and properly increased surface oxidation potential. This work also proposes a versatile and effective strategy to tune the surface physicochemical properties of metal-based nanomaterials via incomplete UPD and metal-cation galvanic replacement for advancing their electrocatalytic and energy conversion performance.